Evaluation of a loop-mediated isothermal amplification-based methodology to detect carbapenemase carriage in Acinetobacter clinical isolates

Development of Loop-Mediated Isothermal Amplification Rapid Diagnostic Assays for the Detection of Klebsiella pneumoniae and Carbapenemase Genes in Clinical Samples

Klebsiella pneumoniae is an important pathogenic bacterium commonly associated with human healthcare and community-acquired infections. In recent years, K. pneumoniae has become a significant threat to global public and veterinary health, because of its high rates of antimicrobial resistance (AMR). Early diagnosis of K. pneumoniae infection and detection of any associated AMR would help to accelerate directed therapy and reduce the risk of the emergence of multidrug-resistant isolates. In this study, we identified three target genes (yhaI, epsL, and xcpW) common to K. pneumoniae isolates from both China and Europe and designed loop-mediated isothermal amplification (LAMP) assays for the detection of K. pneumoniae in clinical samples. We also designed LAMP assays for the detection of five AMR genes commonly associated with K. pneumoniae. The LAMP assays were validated on a total of 319 type reference strains and clinical isolates of diverse genetic backgrounds, in addition to 40 clinical human sputum samples, and were shown to be reliable, highly specific, and sensitive. For the K. pneumoniae–specific LAMP assay, the calculated sensitivity, specificity, and positive and negative predictive values (comparison with culture and matrix-assisted laser desorption/ionization–time of flight mass spectrometry) were all 100% on clinical isolates and, respectively, of 100%, 91%, and 90%, and 100% when tested on clinical sputum samples, while being significantly faster than the reference methods. For the bla_KPC and other carbapenemases’ LAMP assays, the concordance between the LAMP results and the references methods (susceptibility tests) was 100%, on both pure cultures (n = 125) and clinical samples (n = 18). In conclusion, we developed highly sensitive and specific LAMP assays for the clinical identification of K. pneumoniae and detection of carbapenem resistance.

Performance of a loop-mediated isothermal amplification assay (Isoplex CRE-ART) to detect common carbapenemase-encoding genes in Gram-negative bacteria

Carbapenem-resistant Gram-negative bacteria (CR-GNB) are a major source of nosocomial infections worldwide. In this study, the ability of a loop-mediated isothermal amplification (LAMP)-based method (Isoplex CRE-ART) to rapidly detect carbapenemase-encoding genes bla _OXA-48-like, bla _OXA-23-like, bla _OXA-24-like, bla _KPC, bla _VIM, bla _NDM and bla _IMP in 231 carbapenem-resistant Enterobacterales, Pseudomonas aeruginosa and Acinetobacter baumannii isolates was investigated. The accuracy of the LAMP test was compared to results of molecular isolate characterization using a Laboratory Developed Test multiplex carbapenemase PCR assay. The LAMP test correctly identified the presence of on-panel carbapenemases with a sensitivity of 99.16 % [95 % confidence interval (CI): 95.39-99.96 %] and a specificity of 98.21 % (95 % CI: 93.72-99.68 %) in 60 min. Our findings suggest that the Isoplex CRE-ART assay is able to rapidly identify carbapenemase genes in CR-GNB and improves options for pathogen characterization in the context of clinical microbiological and infection control diagnostics.

The Evolving Role of the Clinical Microbiology Laboratory in Identifying Resistance in Gram-Negative Bacteria: An Update

The evolution of resistance to antimicrobial agents in gram-negatives has challenged the role of the clinical microbiology laboratory to implement new methods for their timely detection. Recent development has enabled the use of novel methods for more rapid pathogen identification, antimicrobial susceptibility testing, and detection of resistance markers. Commonly used methods improve the rapidity of resistance detection from both cultured bacteria and specimens. This review focuses on the commercially available systems available together with their technical performance and possible clinical impact.

Assessment of a Loop-Mediated Isothermal Amplification (LAMP) Assay for the Rapid Detection of Pathogenic Bacteria from Respiratory Samples in Patients with Hospital-Acquired Pneumonia

Rapid identification of the causative agent of hospital-acquired pneumonia (HAP) will allow an earlier administration of a more appropriate antibiotic and could improve the outcome of these patients. The aim of this study was to develop a rapid protocol to identify the main microorganisms involved in HAP by loop-mediated isothermal amplification (LAMP) directly from respiratory samples. First of all, a rapid procedure (<30 min) to extract the DNA from bronchoalveolar lavage (BAL), endotracheal aspirate (EA) or bronchoaspirate (BAS) was set up. A specific LAMP for Staphylococcus aureus, Escherichia coli, Klebsiella pneumoniae, Pseudomonas aeruginosa, Stenotrophomonas maltophilia and Acinetobacter baumannii was performed with the extracted solution at 65 °C for 30–40 min. Overall, 58 positive BAL and 83 EA/BAS samples were tested. The limits of detection varied according to the microorganism detected. Validation of the LAMP assay with BAL samples showed that the assay was 100% specific and 86.3% sensitive (positive predictive value of 100% and a negative predictive value of 50%) compared with culture. Meanwhile for BAS/EA samples, the assay rendered the following statistical parameters: 100% specificity, 94.6% sensitivity, 100% positive predictive value and 69.2% negative predictive value. The turnaround time including sample preparation and LAMP was circa 1 h. LAMP method may be used to detect the most frequent bacteria causing HAP. It is a simple, cheap, sensitive, specific and rapid assay.

Evaluation of eazyplex® SuperBug CRE Test for Beta-Lactamase Genes Detection in Klebsiella spp. and P. aeruginosa Strains

The multi-drug resistance of Gram-negative rods is one of the most important issues of present medicine. In recent years, more and more strains resistant to the majority or to all possible therapeutic options have been isolated—especially Klebsiella spp. and Pseudomonas spp. representatives. It is very important to detect strains with these phenotypes as quickly and reliably as possible. The aim of the study was to evaluate the usefulness of eazyplex^® SuperBug CRE test (Amplex Diagnostics) for the detection of the most important beta-lactam resistance genes. eazyplex^® SuperBug CRE test is based on the loop-mediated isothermal amplification (LAMP) method, and detects genes for the following beta-lactamases: KPC, NDM-1, VIM, OXA-48, CTX-M1, CTX-M9 and OXA-181. The study involved 87 strains. For all of the positive strains in the LAMP method, additional PCR were performed to increase the spectrum of ESBLs detected by the genes encoding for enzymes belonging to TEM and SHV families. The results obtained by the tested method and standard PCR were consistent for all Klebsiella spp. strains. The discrepancy between the evaluated test and PCR results was observed for one P. aeruginosa strain. The eazyplex^® SuperBug CRE test can be used for quick detection of the most important beta-lactam resistance mechanisms amongst Gram-negative rods.

Current and Emerging Methods of Antibiotic Susceptibility Testing

Antibiotic susceptibility testing (AST) specifies effective antibiotic dosage and formulates a profile of empirical therapy for the proper management of an individual patient's health against deadly infections. Therefore, rapid diagnostic plays a pivotal role in the treatment of bacterial infection. In this article, the authors review the socio-economic burden and emergence of antibiotic resistance. An overview of the phenotypic, genotypic, and emerging techniques for AST has been provided and discussed, highlighting the advantages and limitations of each. The historical perspective on conventional methods that have paved the way for modern AST like disk diffusion, Epsilometer test (Etest), and microdilution, is presented. Several emerging methods, such as microfluidic-based optical and electrochemical AST have been critically evaluated. Finally, the challenges related with AST and its outlook in the future are presented.

Screening for Carbapenemases in Ertapenem-Resistant Enterobacteriaceae Collected at a Tunisian Hospital Between 2014 and 2018

Background

Carbapenem-resistance is frequently detected in Enterobacteriaceae isolated from patients in Tunisia. The study was performed to identify frequent carbapenemases in Tunisian isolates.

Methods

Between May 2014 and January 2018, 197 ertapenem-resistant Enterobacteriaceae were isolated at the microbiological department of the Military Hospital of Tunis. The strains were phenotypically characterized and then subjected to in-house polymerase chain reaction (PCR) targeting the carbapenemase genes bla_IMP, bla_VIM, bla_NDM, bla_SPM, bla_AIM, bla_DIM,bla_GIM, bla_SIM, bla_KPC, bla_BIC, and bla_OXA-48.

Results

The assessed 197 ertapenem-resistant Enterobacteriaceae from Tunis comprised 170 Klebsiella pneumoniae, 19 Enterobacter cloacae, 6 Escherichia coli, 1 Citrobacter sedlakii, and 1 Enterobacter asburiae. Thereby, 55 out of 197 isolates (27.9%) were from blood cultures, suggesting a systemic disease. The carbapenemase gene bla_OXA-48 quantitatively dominated by far with 153 detections, followed by bla_NDM with 14 detections, which were distributed about the whole study interval. In contrast, bla_BIC and bla_VIM were only infrequently identified in 5 and 3 cases, respectively, while the other carbapenamases were not observed.

Conclusions

The carbapenemase gene bla_OXA-48 was identified in the vast majority of ertapenem-resistant Tunisian Enterobacteriaceae while all other assessed carbapenemases were much less abundant. In a quantitatively relevant minority of isolates, the applied PCR-based screening approach did not identify any carbapenemases.

NDM Metallo-β-Lactamases and Their Bacterial Producers in Health Care Settings

New Delhi metallo-β-lactamase (NDM) is a metallo-β-lactamase able to hydrolyze almost all β-lactams. Twenty-four NDM variants have been identified in >60 species of 11 bacterial families, and several variants have enhanced carbapenemase activity. Klebsiella pneumoniae and Escherichia coli are the predominant carriers of bla _NDM, with certain sequence types (STs) (for K. pneumoniae, ST11, ST14, ST15, or ST147; for E. coli, ST167, ST410, or ST617) being the most prevalent. NDM-positive strains have been identified worldwide, with the highest prevalence in the Indian subcontinent, the Middle East, and the Balkans. Most bla _NDM-carrying plasmids belong to limited replicon types (IncX3, IncFII, or IncC). Commonly used phenotypic tests cannot specifically identify NDM. Lateral flow immunoassays specifically detect NDM, and molecular approaches remain the reference methods for detecting bla _NDM Polymyxins combined with other agents remain the mainstream options of antimicrobial treatment. Compounds able to inhibit NDM have been found, but none have been approved for clinical use. Outbreaks caused by NDM-positive strains have been reported worldwide, attributable to sources such as contaminated devices. Evidence-based guidelines on prevention and control of carbapenem-resistant Gram-negative bacteria are available, although none are specific for NDM-positive strains. NDM will remain a severe challenge in health care settings, and more studies on appropriate countermeasures are required.

Resistant Gram-Negative Bacteria and Diagnostic Point-of-Care Options for the Field Setting during Military Operations

The spread of multidrug-resistant bacteria in resource-poor settings affects the military medical service in case of deployments of soldiers to war and crisis zones. Patients with war injuries are prone to colonization or infection with multidrug-resistant bacteria. Resistant Gram-negative bacteria play a dominant role in military wound infections. Problematic hygiene conditions on deployment facilitate exposition of soldiers with subsequent colonization. Although colonizing strains are frequently cleared from their hosts after returning from deployment, transmission to close contacts of the soldiers in the home country cannot be excluded and therapeutic options are reduced if colonization progresses to invasive infection. Since sophisticated culture-based diagnostic approaches are typically not available in the field setting on deployment, molecular rapid diagnostic test systems are an option for transmission control if the locally prevalent molecular resistance mechanisms are known. Efforts for global resistance surveillance can contribute to better understanding of resistance distribution and spread at deployment sites. This review summarizes experience of the military medical services with multidrug resistance on deployment and with the influx of resistant strains to the home country and discusses potential use of available molecular rapid test systems as an option for the field setting.

The Changing Role of the Clinical Microbiology Laboratory in Defining Resistance in Gram-negatives

The evolution of resistance in Gram-negatives has challenged the clinical microbiology laboratory to implement new methods for their detection. Multidrug-resistant strains present major challenges to conventional and new detection methods. More rapid pathogen identification and antimicrobial susceptibility testing have been developed for use directly on specimens, including fluorescence in situ hybridization tests, automated polymerase chain reaction systems, microarrays, mass spectroscopy, next-generation sequencing, and microfluidics. Review of these methods shows the advances that have been made in rapid detection of resistance in cultures, but limited progress in direct detection from specimens.

Current methods for the identification of carbapenemases

Detection of carbapenemases in clinical microbiology labs is a challenging issue. Comparison of the results of susceptibility testing with the breakpoint values of carbapenems is the first step in the screening of carbapenemase producers. To date, screening of carbapenemase-producing (CP) bacteria has been mostly performed by a selective medium. Although these media are practical for the detection of most CP isolates, the inoculated plates have to be incubated overnight. Subsequently, we need the confirmation of the carbapenemase producers present in the culture medium by additional testing [e.g. inhibition studies with liquid or solid media, modified Hodge test (MHT), or gradient strips], which can take up to another 48 hours. Despite the lack of discrimination between the three different classes of carbapenemases (KPC, MBL and OXA) and difficulties in the interpretation of the results, the MHT is usually deemed as the phenotypic reference method for the confirmation of carbapenemase production. Molecular techniques, such as real-time polymerase chain reaction (PCR) assays, in contrast to phenotypic methods that are very time consuming, are faster and allow for the quick identification of carbapenemase genes. These techniques can detect and characterize carbapenemases, including NDM- and KPC-mediated resistance, which is critical for epidemiological investigations. The aim of this review is to gather a summary of the available methods for carbapenemase detection and describe the strengths and weaknesses of each method.

Intestinal Carriage of Carbapenemase-Producing Organisms: Current Status of Surveillance Methods

Carbapenemases have become a significant mechanism for broad-spectrum β-lactam resistance in Enterobacteriaceae and other Gram-negative bacteria such as Pseudomonas and Acinetobacter spp. Intestinal carriage of carbapenemase-producing organisms (CPOs) is an important source of transmission. Isolation of carriers is one strategy that can be used to limit the spread of these bacteria. In this review, we critically examine the clinical performance, advantages, and disadvantages of methods available for the detection of intestinal carriage of CPOs. Culture-based methods (Centers for Disease Control and Prevention [CDC] protocols, chromogenic media, specialized agars, and double-disk synergy tests) for detecting carriage of CPOs are convenient due to their ready availability and low cost, but their limited sensitivity and long turnaround time may not always be optimal for infection control practices. Contemporary nucleic acid amplification techniques (NAATs) such as real-time PCR, hybridization assays, loop-mediated isothermal amplification (LAMP), or a combined culture and NAAT approach may provide fast results and/or added sensitivity and specificity compared with culture-based methods. Infection control practitioners and clinical microbiologists should be aware of the strengths and limitations of available methods to determine the most suitable approach for their medical facility to fit their infection control needs.

Carbapenem-Resistant Non-Glucose-Fermenting Gram-Negative Bacilli: the Missing Piece to the Puzzle

The non-glucose-fermenting Gram-negative bacilli Pseudomonas aeruginosa and Acinetobacter baumannii are increasingly acquiring carbapenem resistance. Given their intrinsic antibiotic resistance, this can cause extremely difficult-to-treat infections. Additionally, resistance gene transfer can occur between Gram-negative species, regardless of their ability to ferment glucose. Thus, the acquisition of carbapenemase genes by these organisms increases the risk of carbapenemase spread in general. Ultimately, infection control practitioners and clinical microbiologists need to work together to determine the risk carried by carbapenem-resistant non-glucose-fermenting Gram-negative bacilli (CR-NF) in their institution and what methods should be considered for surveillance and detection of CR-NF.

Loop-mediated isothermal amplification: Rapid and sensitive detection of the antibiotic resistance gene ISAba1-blaOXA-51-like in Acinetobacter baumannii

Carbapenem-resistant Acinetobacter baumannii, which are mainly induced by the production of OXA-type β-lactamases, are among the leading causes of nosocomial infections worldwide. Among the β-lactamase genes, the presence of the OXA-51-like gene carrying the upstream insertion sequence, ISAba1, was found to be one of the most prevalent carbapenem resistance mechanisms utilized by these bacteria. Consequently, it is necessary to develop a rapid detection method for ISAba1-blaOXA-51-like sequence for the timely and appropriate antibiotic treatment of A. baumannii infection. In this study, a loop-mediated isothermal amplification (LAMP) assay was optimized for ISAba1-blaOXA-51-like detection. The LAMP primer set was designed to recognize distinct sequences in the ISAba1-blaOXA-51-like gene and could amplify the gene within 25 min at an isothermal temperature of 60°C. This LAMP assay was able to detect the ISAba1-blaOXA-51-like gene with high specificity; in addition, no cross-reactivity was observed for other types of β-lactamase producers (OXA-23-like, OXA-40-like, OXA-58-like, and IMP-1), as indicated by the absence of false positive or false negative results. The detection limit for this assay was found to be 10(0)CFU per tube which was 100-fold more sensitive than a polymerase chain reaction assay for ISAba1-blaOXA-51-like detection. Furthermore, the LAMP assay provided swift detection of the ISAba1-blaOXA-51-like gene, even directly from clinical specimens. In summary, we have described a new, rapid assay for the detection of the ISAba1-blaOXA-51-like gene from A. baumannii that could be useful in a clinical setting. This method might facilitate epidemiological studies and allow monitoring of the emergence of drug resistant strains.

Clinical Specimen-Direct LAMP: A Useful Tool for the Surveillance of blaOXA-23-Positive Carbapenem-Resistant Acinetobacter baumannii

Healthcare-associated infections are a leading cause of morbidity and mortality worldwide. Treatment is increasingly complicated by the escalating incidence of antimicrobial resistance. Among drug-resistant pathogens, carbapenem-resistant Acinetobacter baumannii (CRAb) is of increasing concern because of the limited applicable therapies and its expanding global distribution in developed countries and newly industrialized countries. Therefore, a rapid detection method that can be used even in resource-poor countries is urgently required to control this global public health threat. Conventional techniques, such as bacterial culture and polymerase chain reaction (PCR), are insufficient to combat this threat because they are time-consuming and laborious. In this study, we developed a loop-mediated isothermal amplification (LAMP) method for detecting bla_OXA-23-positive CRAb, the most prevalent form of CRAb in Asia, especially in Thailand, and confirmed its efficacy as a surveillance tool in a clinical setting. Clinical samples of sputum and rectal swabs were collected from patients in a hospital in Bangkok and used for LAMP assays. After boiling and centrifugation, the supernatants were used directly in the assay. In parallel, a culture method was used for comparison purposes to evaluate the specificity and sensitivity of LAMP. As a first step, a total of 120 sputum samples were collected. The sensitivity of LAMP was 88.6% (39/44), and its specificity was 92.1% (70/76) using the culture method as the “gold standard”. When surveillance samples including sputum and rectal swabs were analyzed with the LAMP assay, its sensitivity was 100.0%. This method enables the direct analysis of clinical specimens and provides results within 40 minutes of sample collection, making it a useful tool for surveillance even in resource-poor countries.