Safe and sustained vaginal delivery of pyrimidinedione HIV-1 inhibitors from polyurethane intravaginal rings

Next-generation 3D printed multipurpose prevention intravaginal ring for prevention of HIV, HSV-2, and unintended pregnancy

Globally, nearly half of all pregnancies are unintended, ∼1.3 million new human immunodeficiency virus (HIV) infections are reported every year, and more than 500 million people are estimated to have a genital herpes simplex virus (HSV-2) infection. Here we report the first 3D printed multipurpose prevention technology (MPT) intravaginal ring (IVR) for prevention of HIV, HSV-2, and unintended pregnancy. The IVRs were fabricated using state-of-the-art Continuous Liquid Interface Production (CLIP™) 3D printing technology using a biocompatible silicone-urethane based resin. Anti-HIV drug (Dapivirine, DPV), anti-herpes drug (Pritelivir, PTV) and a contraceptive drug (Levonorgestrel, LNG) were loaded in a macaque size IVR (25 mm outer diameter, OD; 6.0 mm cross-section, CS) allometrically scaled from the human size (54 mm OD; 7.6 mm CS) IVR analogue. All three active pharmaceutical ingredients (APIs) were loaded in the IVR using a single-step drug loading process driven by absorption. DPV, PTV, and LNG elicited zero-order release kinetics in vitro in simulated vaginal fluid (SVF) at pH 4 and pH 8 relevant to human and macaque vaginal pH respectively. CLIP 3D printed MPT IVRs remained stable after 6 months of storage at 4 °C with no change in physical, dimensional, or mechanical properties and no change in drug concentration and absence of drug degradation byproducts. The MPT IVRs elicited sustained release of all three APIs in macaques for 28 days with median plasma concentrations of 138 pg/mL (DPV), 18,700 pg/mL (PTV), and 335 pg/mL (LNG). Safety studies demonstrated that the MPT IVRs were safe and well tolerated in the macaques with no observed change or abnormalities in vaginal pH and no significant changes in any of the 22 mucosal cytokines and chemokines tested including pro-inflammatory (IL-1β, IL-6, IL-8, IFN-γ, TNF-α, IL-17, IL-18) and anti-inflammatory (IL-10, IL-12) cytokines while the MPT IVR was in place or after its removal. Additionally, MPT IVRs elicited no observed alterations in systemic CD4+ and CD8+ T cells during the entire study. Collectively, the proposed MPT IVR has potential to expand preventative choices for young women and girls against unintended pregnancy and two highly prevalent sexually transmitted infections (STIs).

Toward a new generation of vaginal pessaries via 3D-printing: concomitant mechanical support and drug delivery

To improve patient adherence, vaginal pessaries - polymeric structures providing mechanical support to treat stress urinary incontinence (SUI) - greatly benefit from 3D-printing through customization of their mechanics, e.g. infill modifications. However, currently only limited polymers provide both flawless printability and controlled drug release. The current study closes this gap by exploring 3D-printing, more specifically fused filament fabrication, of pharmaceutical grade thermoplastic polyurethanes (TPU) of different hardness and hydrophilicity into complex pessary structures. Next to the pessary mechanics, drug incorporation into such a device was addressed for the first time. Mechanically, the soft hydrophobic TPU was the most promising candidate for pessary customization, as pessaries made thereof covered a broad range of the key mechanical parameter, while allowing self-insertion. From the drug release point of view, the hydrophobic TPUs were superior over the hydrophilic one, as the release levels of the model drug acyclovir were closer to the target value. Summarizing, the fabrication of TPU-based pessaries via 3D-printing is an innovative strategy to create a customized pessary combination product that simultaneously provides mechanical support and pharmacological therapy.

Drug-releasing vaginal rings for HIV/STI and pregnancy prevention: A review of recent advances and clinical applications

INTRODUCTION

Adolescent girls and young women (AGYW), as well as pre- and post-menopausal women globally would benefit from expanded choice to address their sexual and reproductive health (SRH) needs related to Human Immunodeficiency Virus (HIV), sexually transmitted infections (STIs) and pregnancy prevention. Lack of adequate preventative vaccines for HIV/STIs reinforces public health prioritization for options women may use independently to mitigate risk for infectious disease and unplanned pregnancy. Drug releasing intravaginal rings (IVR) represent one such technology that has garnered attention based on the modality's success recently as a pre-exposure prophylaxis (PrEP) delivery option and its impact on reduction in HIV risk.

AREAS COVERED

: This article provides a synopsis of three IVR technologies in active clinical development for prevention of HIV, STI, and unintended pregnancy demonstrating advancements in terms of compatibility with a wide range of drug types with a focus on dapivirine-based silicone rings (International Partnership for Microbicides (IPM), tenofovir-based polyurethane rings (CONRAD), and pod-based rings (Oak Crest Institute of Science).

EXPERT OPINION

The goals of IVR research are to reduce burdens of HIV/STIs and unplanned pregnancies. Through the evolution of IVR technologies, the potential exists to trigger integration of healthcare services through formulation of products with multiple indications.

Refining the in vitro release test method for a dapivirine-releasing vaginal ring to match in vivo performance

Previously reported in vitro release test methods for drug-releasing vaginal rings containing poorly water-soluble drugs have described use of water-alcohol systems or surfactant solutions in efforts to maintain sink conditions. Here, as part of efforts to more closely match in vitro and in vivo release for the 25 mg dapivirine matrix-type silicone elastomer vaginal ring for HIV prevention, we have investigated alternatives to the 1:1 v/v water/isopropanol medium described previously. Specifically, we evaluated dapivirine release from rings into (i) monophasic water/isopropanol mixtures of varying compositions and (ii) biphasic buffer/octanol systems using pH 4.2 and pH 7.0 buffers. The rate and mechanism of dapivirine release were dependent upon the isopropanol concentration in the release medium, in accordance with the observed trend in drug solubility. At 0 and 10% v/v isopropanol concentrations, dapivirine release followed a partition-controlled mechansim. For media containing ≥ 20% v/v isopropanol, in vitro release of dapivirine was significantly increased and obeyed permeation-controlled kinetics. Cumulative release of ~3.5 mg dapivirine over 28 days was obtained using a water isopropanol mixture containing 20% v/v isopropanol, similar to the ~4 mg dapivirine released in vivo. Dapivirine release into the biphasic buffer/octanol system (intended to mimic the fluid/tissue environment in vivo) was constrained by the limited solubility of dapivirine in the buffer component in which the ring resided, such that cumulative dapivirine release was consistently lower than that observed with the 20% v/v isopropanol in water medium. Release into the biphasic system was also pH dependent, in line with dapivirine's pK_a and with potential implications for in vivo release and absorption in women with elevated vaginal pH.

The Vaginal Microbiota, Bacterial Biofilms and Polymeric Drug-Releasing Vaginal Rings

The diversity and dynamics of the microbial species populating the human vagina are increasingly understood to play a pivotal role in vaginal health. However, our knowledge about the potential interactions between the vaginal microbiota and vaginally administered drug delivery systems is still rather limited. Several drug-releasing vaginal ring products are currently marketed for hormonal contraception and estrogen replacement therapy, and many others are in preclinical and clinical development for these and other clinical indications. As with all implantable polymeric devices, drug-releasing vaginal rings are subject to surface bacterial adherence and biofilm formation, mostly associated with endogenous microorganisms present in the vagina. Despite more than 50 years since the vaginal ring concept was first described, there has been only limited study and reporting around bacterial adherence and biofilm formation on rings. With increasing interest in the vaginal microbiome and vaginal ring technology, this timely review article provides an overview of: (i) the vaginal microbiota, (ii) biofilm formation in the human vagina and its potential role in vaginal dysbiosis, (iii) mechanistic aspects of biofilm formation on polymeric surfaces, (iv) polymeric materials used in the manufacture of vaginal rings, (v) surface morphology characteristics of rings, (vi) biomass accumulation and biofilm formation on vaginal rings, and (vii) regulatory considerations.

In Vitro Methods for Evaluating Drug Release of Vaginal Ring Formulations-A Critical Review

The vagina is a promising site for both local and systemic drug delivery and represents an interesting administration route for compounds with poor oral bioavailability. Whereas most of the currently marketed dosage forms were designed as immediate release formulations, intravaginal rings (IVRs) offer the possibility of a controlled vaginal drug delivery over several weeks or months. For a long time, the development of IVRs was limited to steroid-releasing formulations. Recently, IVRs have witnessed a surge of new interest as promising delivery systems for microbicides. Therefore, various novel IVR designs have been introduced. To ensure that only safe and effective IVRs will be administered to patients, it is important to properly distinguish between IVRs with desired and undesired release performance. In vitro methods for evaluating drug release of IVRs that present with sufficient predictive capacity for in vivo drug release, and discriminatory power with regard to IVRs quality, are an essential tool for this purpose. The objective of the present review article is to present the current status of in vitro drug release testing of IVRs and to critically discuss current compendial and non-official in vitro drug release methods with regard to their discriminatory power and in vivo predictivity.

In vitro release testing methods for drug-releasing vaginal rings

Drug-releasing vaginal rings are torus-shaped devices, generally fabricated from thermoplastic polymers or silicone elastomers, used to administer pharmaceutical drugs to the human vagina for periods typically ranging from three weeks to twelve months. One of the most important product performance tests for vaginal rings is the in vitro release test. Although it has been fifty years since a vaginal ring device was first described in the scientific literature, and despite seven drug-releasing vaginal rings having been approved for market, there is no universally accepted method for testing in vitro drug release, and only one non-compendial shaking incubator method (for the estradiol-releasing ring Estring®) is described in the US Food and Drug Administration's Dissolution Methods Database. Here, for the first time, we critically review the diverse range of test methods that have been described in the scientific literature for testing in vitro release of drug-releasing vaginal rings. Issues around in vitro-in vivo correlation and modelling of in vitro release data are also discussed.

Effects of gel volume on pharmacokinetics for vaginal and rectal applications of combination DuoGel-IQB4012, a dual chamber-dual drug HIV microbicide gel, in pigtailed macaques

This study evaluated effects of differing gel volumes on pharmacokinetics (PK). IQB4012, a gel containing the non-nucleoside reverse transcriptase inhibitor IQP-0528 and tenofovir (TFV), was applied to the pigtailed macaque vagina and rectum. Vaginal gel volumes (1% loading of both drugs) were 0.5 or 1.5 ml; following wash-out, 1 or 4 ml of gel were then applied rectally. Blood, vaginal, and rectal fluids were collected at 0, 2, 4, and 24 h. Vaginal and rectal tissue biopsies were collected at 4 and 24 h. There were no statistically significant differences in concentrations for either drug between gel volumes within compartments at matched time points. After vaginal gel application, median IQP-0528 concentrations were ~ 10⁴-10⁵ ng/g, 10⁵-10⁶ ng/ml, and 10³-10⁵ ng/ml in vaginal tissues, vaginal fluids, and rectal fluids, respectively (over 24 h). Median vaginal TFV concentrations were 1-2 logs lower than IQP-0528 levels at matched time points. After rectal gel application, median IQP-0528 and TFV concentrations in rectal fluids were ~ 10³-10⁵ ng/ml and ~ 10²-10³ ng/ml, respectively. Concentrations of both drugs sampled in rectal tissues were low (~ 10¹-10³ ng/g). For 1 ml gel, half of sampled rectal tissues had undetectable concentrations of either drug, and over half of sampled rectal fluids had undetectable TFV concentrations. These results indicate differences in drug delivery between the vaginal and rectal compartments, and that smaller vaginal gel volumes may not significantly compromise microbicide PK and prophylactic potential. However, effects of rectal gel volume on PK for both drugs were less definitive.

Design and development of pH-responsive polyurethane membranes for intravaginal release of nanomedicines

The objective of this study was to develop and characterize a novel intravaginal membrane platform for pH-triggered release of nanoparticles (NPs), which is essential for efficient intravaginal delivery of certain effective but acid-labile therapeutic agents for sexually transmitted infections, such as small interfering RNA (siRNA). A pH-responsive polyurethane (PU) was electrospun into a porous nanofibrous membrane. The diameters of the fibers, as well as the thickness and pore sizes of the membrane under dry and wet conditions (pH 4.5 and 7.0), were determined from scanning electron microscopy (SEM) micrographs. pH-dependent zeta-potential (ζ) of the membrane was evaluated using a SurPASS electrokinetic analyzer. Visiblex™ color-dyed polystyrene NPs (PSNs, 200 nm, COOH) and CCR5 siRNA-encapsulated solid lipid NPs (SLNs) were used for in vitro NP release studies in a vaginal fluid simulant (VFS) at pH 4.5 (normal physiological vaginal pH) and 7.0 (vaginal pH neutralization by semen). During 24 h of incubation in VFS, close-to-zero PSNs (2 ± 1%) and 28 ± 4% SLNs were released through the PU membrane at pH 4.5, whereas the release of PSNs and SLNs significantly increased to 60 ± 6% and 59 ± 8% at pH 7.0, respectively. The pH-responsive release of NPs hinged on the electrostatic interaction between the pH-responsive membrane and the anionic NPs, and the change in pH-responsive morphology of the membrane. In vitro biocompatibility studies of the membrane showed no significant cytotoxicity to VK2/E6E7 human epithelial cells and Sup-T1 human T-cells and no significant changes in the expression of pro-inflammatory cytokines (IL-6, IL-8, and IL-1β). Overall, the porous pH-responsive PU membrane demonstrated its potential in serving as a "window" membrane in reservoir-type intravaginal rings (IVRs) for pH-responsive intravaginal release of NPs. STATEMENT OF SIGNIFICANCE: Stimuli-responsive intravaginal nanoparticle release is achieved for the first time through a new electrospun pH-responsive polyurethane (PU) semi-permeable membrane, which can serve as a "window" membrane in the reservoir-type IVR for the prevention of human immunodeficiency virus (HIV) transmission. Almost no release of nanoparticles was observed at normal pH in the female genital tract (in vaginal fluid simulant [VFS], at pH 4.5); however, a continuous release of NPs was observed at elevated pH in the female genital tract (in VFS, at pH 7.0). This pH-responsive intravaginal release can reduce side effect and drug resistance by avoiding unnecessary exposure. The PU semi-permeable membrane demonstrated potential use as biomaterials for "smart" intravaginal nanoparticle release and has great potential to protect women from HIV.

In situ-forming and pH-responsive hydrogel based on chitosan for vaginal delivery of therapeutic agents

One of the important routes of drug administration for localized delivery of contraceptives and cervical cancer treatment agents is vaginal canal. Due to the low pH of vagina, a pH-responsive drug delivery system was developed. This hydrogel was synthesized based on a mucoadhesive biopolymer, chitosan (CS), that promotes the interaction between the hydrogel and mucosal surface of the vagina, potentially increasing the residence time of the system. This injectable hydrogel was formed via acid-labile Schiff-base linkages between free amine groups and aldehyde functionalities on modified chitosan. A novel approach was taken to add aldehyde functionalities to chitosan using a two-step reaction. Two types of slow and fast degrading hydrogels were prepared and loaded with iron (II) gluconate dihydrate, a non-hormonal spermicide, and doxorubicin hydrochloride, an anti-cancer drug. The release profiles of these drugs at different pH environments were assessed to determine the pH-dependent release mechanism. Mechanical properties, swell-ability and degradation rate of these matrices were studied. The cross-linking density of the hydrogel as well as pH changes played an important role in the characteristic of these hydrogels. The hydrogels degraded faster in lower pH, while the hydrogel with lower cross-linking density showed longer gelation time and faster degradation rate compared to the gel with higher cross-linking density. In vitro cytotoxicity assessment of these hydrogels in 48 h indicated the non-toxic effect of these hydrogels toward mesenchymal stem cells (MSCs) in the test period.

Smart and Biostable Polyurethanes for Long-Term Implants

This article reviews stimuli-responsive and biostable polyurethanes (PUs) and discusses biomedical applications of smart PUs with a particular focus on long-term implantable PU biomaterials such as PU generated artificial blood vessels, artificial intervertebral discs (IVDs), and intravaginal rings (IVRs). Recently, smart PUs have been actively researched to enhance bioactivity, biocompatibility, and reduce drug side effects. Although biodegradability is important in regenerative medicine, biostability of PU plays a key role for long-term implantable biomaterials. This article reviews recent publications of research and inventions of stimuli-responsive and biostable PUs. Applications of smart PUs in long-term implantable biomaterials are discussed and linked to the future outlook of smart biostable PU biomaterials.

A Dose Ranging Pharmacokinetic Evaluation of IQP-0528 Released from Intravaginal Rings in Non-Human Primates

PURPOSE

Design of intravaginal rings (IVRs) for delivery of antiretrovirals is often guided by in vitro release under sink conditions, based on the assumption that in vivo release will follow a similar release profile.

METHODS

We conducted a dose-ranging study in the female reproductive tract of pigtail macaques using matrix IVRs containing IQP-0528, a poorly soluble but highly potent antiretroviral drug with an IC₉₀ of 146 ng/mL. These IVRs consisted of drug-loaded segments, 15.6% IQP-0528 in Tecoflex 85A, comprising either all, half, or a quarter of the entire ring.

RESULTS

In vitro release under sink conditions demonstrates loading-proportional release, with a cumulative 30-day release of 48.5 ± 2.2 mg for our 100% loaded ring, 24.8 ± .36 mg from our 50% loaded ring, and 13.99 ± 1.58 mg from our 25% loaded ring. In vivo, while drug concentration in vaginal fluid is well in excess of IQP-0528's EC₉₀, we find no statistical difference between the different ring loadings in either swab drug levels or drug released from our rings.

CONCLUSIONS

We show that in vitro release may not accurately reflect in vivo release, particularly for poorly soluble drugs. All tested loadings of our IVRs are capable of delivering IQP-0528 well in excess of the IC₉₀.

Repeated administration of high-dose depot medroxyprogesterone acetate does not alter SHIVSF162p3 viral kinetics and tenofovir pharmacokinetics when delivered via intravaginal rings

BACKGROUND

Intravaginal rings (IVR) for HIV prevention will likely be used by women on depot medroxyprogesterone acetate (DMPA) hormonal contraception. We used pigtailed macaques to evaluate the effects of DMPA on tenofovir disoproxil fumarate (TDF) IVR pharmacokinetics and viral shedding.

METHODS

Mucosal tenofovir (TFV) levels were compared in SHIVSF162p3 -negative DMPA-treated (n=4) and normally cycling (n=6) macaques receiving TDF IVRs. Plasma viremia and vaginal shedding were determined in groups of SHIVSF162p3 -positive DMPA-treated (n=6) and normally cycling (n=5) macaques.

RESULTS

Similar median vaginal fluid TFV concentrations were observed in the DMPA-treated and cycling macaques over 4 weeks (1.2×105 and 1.1.×105  ng/mL, respectively). Median plasma viremia and vaginal shedding AUC of the DMPA-treated (2.73×107 and 8.15×104 copies/mL, respectively) and cycling macaques (3.98×107 and 1.47×103 copies/mL, respectively) were statistically similar.

CONCLUSIONS

DMPA does not affect TDF IVR pharmacokinetics or SHIV shedding.

A multiplex assay for detection of SHIV plasma and mucosal IgG and IgA

Evaluating antibody maturation provides valuable data to characterize immune responses to HIV infection and can provide insight into biomedical intervention efficacy. It is important to develop assays that evaluate antibody maturation in both plasma and mucosal compartments. The nonhuman primate model provides a controlled system to collect temporal data that are integral to assessing intervention strategies. We report the development of a novel multiplex assay, based on the Bio-Plex platform, to evaluate plasma and mucosal IgG and IgA avidity and maturation against simian/human immunodeficiency virus (SHIV) in this controlled system. Vaginal mucosa and plasma samples were collected from a prior study evaluating the efficacy of a tenofovir disoproxil fumarate (TDF) intravaginal ring (IVR) against SHIVSF162P3 challenge in female pigtailed macaques. For validation of the multiplex assay, specimens from six SHIV-infected placebo animals and one TDF breakthrough animal were evaluated. For SHIV and HIV envelope analytes, antibody levels and avidity in both compartments continued to mature post-infection. Maturation of IgG and IgA levels was similar in each compartment, however, mucosal antibody levels tended to be more variable. This SHIV assay elucidates IgG/IgA antibody kinetics in the plasma and vaginal mucosa and will be a valuable tool in vaccine and other biomedical intervention studies in the nonhuman primate model.

Evaluation of poly(lactic-co-glycolic acid) and poly(dl-lactide-co-ε-caprolactone) electrospun fibers for the treatment of HSV-2 infection

More diverse multipurpose prevention technologies are urgently needed to provide localized, topical pre-exposure prophylaxis against sexually transmitted infections (STIs). In this work, we established the foundation for a multipurpose platform, in the form of polymeric electrospun fibers (EFs), to physicochemically treat herpes simplex virus 2 (HSV-2) infection. To initiate this study, we fabricated different formulations of poly(lactic-co-glycolic acid) (PLGA) and poly(dl-lactide-co-ε-caprolactone) (PLCL) EFs that encapsulate Acyclovir (ACV), to treat HSV-2 infection in vitro. Our goals were to assess the release and efficacy differences provided by these two different biodegradable polymers, and to determine how differing concentrations of ACV affected fiber efficacy against HSV-2 infection and the safety of each platform in vitro. Each formulation of PLGA and PLCL EFs exhibited high encapsulation efficiency of ACV, sustained-delivery of ACV through one month, and in vitro biocompatibility at the highest doses of EFs tested. Additionally, all EF formulations provided complete and efficacious protection against HSV-2 infection in vitro, regardless of the timeframe of collected fiber eluates tested. This work demonstrates the potential for PLGA and PLCL EFs as delivery platforms against HSV-2, and indicates that these delivery vehicles may be expanded upon to provide protection against other sexually transmitted infections.

Past, Present, and Future Drug Delivery Systems for Antiretrovirals

The human immunodeficiency virus has infected millions of people and the epidemic continues to grow rapidly in some parts of the world. Antiretroviral (ARV) therapy has provided improved treatment and prolonged the life expectancy of patients. Moreover, there is growing interest in using ARVs to protect against new infections. Hence, ARVs have emerged as our primary strategy in combating the virus. Unfortunately, several challenges limit the optimal performance of these drugs. First, ARVs often require life-long use and complex dosing regimens. This results in low patient adherence and periods of lapsed treatment manifesting in drug resistance. This has prompted the development of alternate dosage forms such as vaginal rings and long-acting injectables that stand to improve patient adherence. Another problem central to therapeutic failure is the inadequate penetration of drugs into infected tissues. This can lead to incomplete treatment, development of resistance, and viral rebound. Several strategies have been developed to improve drug penetration into these drug-free sanctuaries. These include encapsulation of drugs in nanoparticles, use of pharmacokinetic enhancers, and cell-based drug delivery platforms. In this review, we discuss issues surrounding ARV therapy and their impact on drug efficacy. We also describe various drug delivery-based approaches developed to overcome these issues.

Microbicide vaginal rings: Technological challenges and clinical development

Vaginal rings (VRs) are flexible, torus-shaped, polymeric devices designed to sustain delivery of pharmaceutical drugs to the vagina for clinical benefit. Following first report in a 1970 patent application, several steroid-releasing VR products have since been marketed for use in hormone replacement therapy and contraception. Since 2002, there has been growing interest in the use of VR technology for delivery of drugs that can reduce the risk of sexual acquisition of human immunodeficiency virus type 1 (HIV-1), the causative agent of acquired immunodeficiency syndrome (AIDS). Although no vaginally-administered product has yet been approved for HIV reduction/prevention, extensive research efforts are continuing and a number of VR devices offering sustained release of so-called 'HIV microbicide' compounds are currently being evaluated in late-stage clinical studies. This review article provides an overview of the published scientific literature within this important field of research, focusing primarily on articles published within peer-reviewed journal publications. Many important aspects of microbicide-releasing VR technology are discussed, with a particular emphasis on the technological, manufacturing and clinical challenges that have emerged in recent years.

Safety and Pharmacokinetics of Quick-Dissolving Polymeric Vaginal Films Delivering the Antiretroviral IQP-0528 for Preexposure Prophylaxis

For human immunodeficiency virus (HIV) prevention, microbicides or drugs delivered as quick-dissolving films may be more acceptable to women than gels because of their compact size, minimal waste, lack of an applicator, and easier storage and transport. This has the potential to improve adherence to promising products for preexposure prophylaxis. Vaginal films containing IQP-0528, a nonnucleoside reverse transcriptase inhibitor, were evaluated for their pharmacokinetics in pigtailed macaques. Polymeric films (22 by 44 by 0.1 mm; providing 75% of a human dose) containing IQP-0528 (1.5%, wt/wt) with and without poly(lactic-co-glycolic acid) (PLGA) nanoparticle encapsulation were inserted vaginally into pigtailed macaques in a crossover study design (n = 6). With unencapsulated drug, the median (range) vaginal fluid concentrations of IQP-0528 were 160.97 (2.73 to 2,104), 181.79 (1.86 to 15,800), and 484.50 (8.26 to 4,045) μg/ml at 1, 4, and 24 h after film application, respectively. Median vaginal tissue IQP-0528 concentrations at 24 h were 3.10 (0.03 to 222.58) μg/g. The values were similar at locations proximal, medial, and distal to the cervix. The IQP-0528 nanoparticle-formulated films delivered IQP-0528 in vaginal tissue and secretions at levels similar to those obtained with the unencapsulated formulation. A single application of either formulation did not disturb the vaginal microflora or the pH (7.24 ± 0.84 [mean ± standard deviation]). The high mucosal IQP-0528 levels delivered by both vaginal film formulations were between 1 and 5 log higher than the in vitro 90% inhibitory concentration (IC90) of 0.146 μg/ml. The excellent coverage and high mucosal levels of IQP-0528, well above the IC90, suggest that the films may be protective and warrant further evaluation in a vaginal repeated low dose simian-human immunodeficiency virus (SHIV) transmission study in macaques and clinically in women.

Recent work on vaginal rings containing antiviral agents for HIV prevention

PURPOSE OF REVIEW

In response to the need for strategies women can use to protect themselves from HIV infection, a new class of product commonly referred to as vaginal 'microbicides' has been under development for the past few decades. Several leading products currently in development contain antiviral agents delivered in a vaginal ring.

RECENT FINDINGS

Research published over the past year reports advances in identification and continued formulation of specific antiviral agents that have potential for delivery in vaginal rings, including drug combinations for HIV, other sexually transmitted infections and contraception. Most products are antiretroviral reverse transcriptase inhibitors. Advances in vaginal ring design have also been reported; some of these are designed to release specific antiviral agents, while other designs could be used for multiple drugs. This review focuses both on antiviral agents and vaginal ring designs.

SUMMARY

Over the past year, advances continued to be made in the development of vaginal rings to deliver antiviral agents for prevention of HIV. An array of antiviral agents and vaginal ring designs to deliver these products are at various stages in the product pipeline process. Results from the first efficacy trials of an antiretroviral-containing vaginal ring are expected soon and will inform the continued development of this important product class.

Controlling the hydration rate of a hydrophilic matrix in the core of an intravaginal ring determines antiretroviral release

Intravaginal ring technology is generally limited to releasing low molecular weight species that can diffuse through the ring elastomer. To increase the diversity of drugs that can be delivered from intravaginal rings, we designed an IVR that contains a drug matrix encapsulated in the core of the IVR whereby the mechanism of drug release is uncoupled from the interaction of the drug with the ring elastomer. We call the device a flux controlled pump, and it is comprised of compressed pellets of a mixture of drug and hydroxypropyl cellulose within the hollow core of the ring. The pump orifice size and chemistry of the polymer pellets control the rate of hydration and diffusion of the drug-containing hydroxypropyl cellulose gel from the device. A mechanistic model describing the hydration and diffusion of the hydroxypropyl cellulose matrix is presented. Good agreement between the quantitative model predictions and the experimental studies of drug release was obtained. We achieved controlled release rates of multiple antiretrovirals ranging from μg/d to mg/d by altering the orifice design, drug loading, and mass of pellets loaded in the device. This device could provide an adaptable platform for the vaginal drug delivery of many molecules.

Pharmacokinetic and Pharmacodynamic Evaluation following Vaginal Application of IQB3002, a Dual-Chamber Microbicide Gel Containing the Nonnucleoside Reverse Transcriptase Inhibitor IQP-0528 in Rhesus Macaques

We evaluated the in vivo pharmacokinetics and used a complementary ex vivo coculture assay to determine the pharmacodynamics of IQB3002 gel containing 1% IQP-0528, a nonnucleoside reverse transcriptase inhibitor (NNRTI), in rhesus macaques (RM). The gel (1.5 ml) was applied vaginally to 6 simian-human immunodeficiency (SHIV)-positive female RM. Blood, vaginal fluids, and rectal fluids were collected at 0, 1, 2, and 4 h. RM were euthanized at 4 h, and vaginal, cervical, rectal, and regional lymph node tissues were harvested. Anti-human immunodeficiency virus (HIV) activity was evaluated ex vivo by coculturing fresh or frozen vaginal tissues with activated human peripheral blood mononuclear cells (PBMCs) and measuring the p24 levels for 10 days after an HIV-1Ba-L challenge. The median levels of IQP-0528, determined using liquid chromatography-tandem mass spectroscopy (LC-MS/MS) methods, were between 10(4) and 10(5) ng/g in vaginal and cervical tissue, between 10(3) and 10(4) ng/g in rectal tissues, and between 10(5) and 10(7) ng/ml in vaginal fluids over the 4-h period. The vaginal tissues protected the cocultured PBMCs from HIV-1 infection ex vivo, with a viral inhibition range of 81 to 100% in fresh and frozen tissues that were proximal, medial, and distal relative to the cervix. No viral inhibition was detected in untreated baseline tissues. Collectively, the median drug levels observed were 5 to 7 logs higher than the in vitro 50% effective concentration (EC50) range (0.21 ng/ml to 1.29 ng/ml), suggesting that 1.5 ml of the gel delivers IQP-0528 throughout the RM vaginal compartment at levels that are highly inhibitory to HIV-1. Importantly, antiviral activity was observed in both fresh and frozen vaginal tissues, broadening the scope of the ex vivo coculture model for future NNRTI efficacy studies.

Acceptability and preferences for vaginal dosage forms intended for prevention of HIV or HIV and pregnancy

This paper reviews key issues found to affect acceptability and preferences for vaginal products to prevent HIV infection or HIV and pregnancy. We focus on the interplay between the biological and physico-chemical aspects of formulation and the social and behavioral issues that may affect use. The need for an HIV prevention product that women can use is driven by women's increased biological and social vulnerability to HIV infection, and thus social and behavioral research on microbicide acceptability has been conducted alongside, as well as separate from, the earliest product development efforts. Some acceptability and preference issues are specific to a product's dosage form, use-requirements, and/or use indications, while others pertain to any vaginal product used for prevention of HIV or pregnancy. Although most of the work cited here was published since 2010, it draws on a much longer trajectory of research.

An Intravaginal Ring for the Simultaneous Delivery of an HIV-1 Maturation Inhibitor and Reverse-Transcriptase Inhibitor for Prophylaxis of HIV Transmission

Nucleocapsid 7 (NCp7) inhibitors have been investigated extensively for their role in impeding the function of HIV-1 replication machinery and their ability to directly inactivate the virus. A class of NCp7 zinc finger inhibitors, S-acyl-2-mercaptobenzamide thioesters (SAMTs), was investigated for topical drug delivery. SAMTs are inherently unstable because of their hydrolytically labile thioester bond, thus requiring formulation approaches that can lend stability. We describe the delivery of N-[2-(3,4,5-trimethoxybenzoylthio)benzoyl]-β-alaninamide (SAMT-10), as a single agent antiretroviral (ARV) therapeutic and in combination with the HIV-1 reverse-transcriptase inhibitor pyrimidinedione IQP-0528, from a hydrophobic polyether urethane (PEU) intravaginal ring (IVR) for a month. The physicochemical stability of the ARV-loaded IVRs was confirmed after 3 months at 40°C/75% relative humidity. In vitro, 25 ± 3 mg/IVR of SAMT-10 and 86 ± 13 mg/IVR of IQP-0528 were released. No degradation of the hydrolytically labile SAMT-10 was observed within the matrix. The combination of ARVs had synergistic antiviral activity when tested in in vitro cell-based assays. Toxicological evaluations performed on an organotypic EpiVaginal(™) tissue model demonstrated a lack of formulation toxicity. Overall, SAMT-10 and IQP-0528 were formulated in a stable PEU IVR for sustained release. Our findings support the need for further preclinical evaluation. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 104:3426-3439, 2015.

Pharmacokinetic evaluation of tenofovir disoproxil fumarate released from an intravaginal ring in pigtailed macaques after 6 months of continuous use

BACKGROUND AND METHODS

A reservoir intravaginal ring (IVR) eluting tenofovir disoproxil fumarate (TDF) was evaluated for 6 months of continuous use in normally cycling female pigtailed macaques with monthly IVR exchanges to define pharmacokinetics and safety.

RESULTS AND CONCLUSIONS

Tenofovir levels in vaginal secretions and tissue remained consistent for 6 months with no adverse safety concerns.

Engineering a segmented dual-reservoir polyurethane intravaginal ring for simultaneous prevention of HIV transmission and unwanted pregnancy

The HIV/AIDS pandemic and its impact on women prompt the investigation of prevention strategies to interrupt sexual transmission of HIV. Long-acting drug delivery systems that simultaneously protect womenfrom sexual transmission of HIV and unwanted pregnancy could be important tools in combating the pandemic. We describe the design, in silico, in vitro and in vivo evaluation of a dual-reservoir intravaginal ring that delivers the HIV-1 reverse transcriptase inhibitor tenofovir and the contraceptive levonorgestrel for 90 days. Two polyether urethanes with two different hard segment volume fractions were used to make coaxial extruded reservoir segments with a 100 µm thick rate controlling membrane and a diameter of 5.5 mm that contain 1.3 wt% levonorgestrel. A new mechanistic diffusion model accurately described the levonorgestrel burst release in early time points and pseudo-steady state behavior at later time points. As previously described, tenofovir was formulated as a glycerol paste and filled into a hydrophilic polyurethane, hollow tube reservoir that was melt-sealed by induction welding. These tenofovir-eluting segments and 2 cm long coaxially extruded levonorgestrel eluting segments were joined by induction welding to form rings that released an average of 7.5 mg tenofovir and 21 µg levonorgestrel per day in vitro for 90 days. Levonorgestrel segments placed intravaginally in rabbits resulted in sustained, dose-dependent levels of levonorgestrel in plasma and cervical tissue for 90 days. Polyurethane caps placed between segments successfully prevented diffusion of levonorgestrel into the tenofovir-releasing segment during storage.Hydrated rings endured between 152 N and 354 N tensile load before failure during uniaxial extension testing. In summary, this system represents a significant advance in vaginal drug delivery technology, and is the first in a new class of long-acting multipurpose prevention drug delivery systems.

Pharmacokinetic and safety analyses of tenofovir and tenofovir-emtricitabine vaginal tablets in pigtailed macaques

Vaginal rapidly disintegrating tablets (RDTs) containing tenofovir (TFV) or TFV and emtricitabine (FTC) were evaluated for safety and pharmacokinetics in pigtailed macaques. Two separate animal groups (n = 4) received TFV (10 mg) or TFV-FTC (10 mg each) RDTs, administered near the cervix. A third group (n = 4) received 1 ml TFV gel. Blood plasma, vaginal tissue biopsy specimens, and vaginal fluids were collected before and after product application at 0, 0.5, 1, 4, and 24 h. A disintegration time of <30 min following vaginal application of the RDTs was noted, with negligible effects on local inflammatory cytokines, vaginal pH, and microflora. TFV pharmacokinetics were generally similar for both RDTs and gel, with peak median concentrations in vaginal tissues and vaginal secretions being on the order of 10(4) to 10(5) ng/g (147 to 571 μM) and 10(6) ng/g (12 to 34 mM), respectively, at 1 to 4 h postdose. At 24 h, however, TFV vaginal tissue levels were more sustained after RDT dosing, with median TFV concentrations being approximately 1 log higher than those with gel dosing. FTC pharmacokinetics after combination RDT dosing were similar to those of TFV, with peak median vaginal tissue and fluid levels being on the order of 10(4) ng/g (374 μM) and 10(6) ng/g (32 mM), respectively, at 1 h postdose with levels in fluid remaining high at 24 h. RDTs are a promising alternative vaginal dosage form, delivering TFV and/or FTC at levels that would be considered inhibitory to simian-human immunodeficiency virus in the macaque vaginal microenvironment over a 24-h period.

Microbicides for the Treatment of Sexually Transmitted HIV Infections

Approximately 34 million people were living with human immunodeficiency virus (HIV-1) at the end of 2011. From the last two decades, researchers are actively involved in the development of an effective HIV-1 treatment, but the results intended are still doubtful about the eradication of HIV. The HIV-1 virus has gone from being an "inherently untreatable" infectious agent to the one liable to be affected by a range of approved therapies. Candidate microbicides have been developed to target specific steps in the process of viral transmission. Microbicides are self-administered agents that can be applied to vaginal or rectal mucosal surfaces with the aim of preventing, or reducing, the transmission of sexually transmitted infections (STIs) including HIV-1. The development of efficient, widely available, and low-cost microbicides to prevent sexually transmitted HIV infections should be given high priority. In this review, we studied the various forms of microbicides, their mechanism of action, and their abundant approaches to control the transmission of sexually transmitted infections (STIs).

Animal models for microbicide safety and efficacy testing

PURPOSE OF REVIEW

Early studies have cast doubt on the utility of animal models for predicting success or failure of HIV-prevention strategies, but results of multiple human phase 3 microbicide trials, and interrogations into the discrepancies between human and animal model trials, indicate that animal models were, and are, predictive of safety and efficacy of microbicide candidates.

RECENT FINDINGS

Recent studies have shown that topically applied vaginal gels, and oral prophylaxis using single or combination antiretrovirals are indeed effective in preventing sexual HIV transmission in humans, and all of these successes were predicted in animal models. Further, prior discrepancies between animal and human results are finally being deciphered as inadequacies in study design in the model, or quite often, noncompliance in human trials, the latter being increasingly recognized as a major problem in human microbicide trials.

SUMMARY

Successful microbicide studies in humans have validated results in animal models, and several ongoing studies are further investigating questions of tissue distribution, duration of efficacy, and continued safety with repeated application of these, and other promising microbicide candidates in both murine and nonhuman primate models. Now that we finally have positive correlations with prevention strategies and protection from HIV transmission, we can retrospectively validate animal models for their ability to predict these results, and more importantly, prospectively use these models to select and advance even safer, more effective, and importantly, more durable microbicide candidates into human trials.

Novel preclinical models of topical PrEP pharmacodynamics provide rationale for combination of drugs with complementary properties

Background

The limited success of recent HIV topical pre-exposure prophylaxis clinical trials highlights the need for more predictive models of drug efficacy that better simulate what may happen during sexual exposure. To address this gap, we developed complementary in vitro models to evaluate the ability of drugs to retain anti-HIV activity if cells were washed with seminal plasma (simulating what may happen following exposure to ejaculate), and to protect drug-naive T cells (representing newly recruited immune cells) co-cultured with explants that had been pretreated with drug. We focused on tenofovir disoproxil fumarate (TDF), the non-nucleoside reverse transcriptase inhibitors dapivirine (DPV) and IQP-0528, and the entry inhibitors maraviroc (MVC) and the D-peptide chol-PIE-12 trimer (PIE12). Studies were extended to macaques and the ability of cervical biopsies obtained from animals treated with an intravaginal ring formulation of IQP-0528 to protect ex vivo co-cultured T cells was determined. The antiviral activity of cervicovaginal lavage samples against a primary Clade C isolate was also measured and correlated with drug levels.

Results

Cells exposed to TDF were equally protected from HIV whether or not the drug-treated cells were washed with medium or seminal plasma prior to challenge. In contrast, several-fold higher concentrations of NNRTIs and entry inhibitors were needed to attain similar levels of HIV inhibition following a wash with seminal plasma. Conversely, the NNRTIs and PIE12, but not TDF or MVC, were effectively transferred from ex vivo treated explants and protected co-cultured T cells. Biopsies obtained from IQP-0528 ring-treated macaques also protected co-cultured T cells with viral inhibition ranging from 42-72%. Antiviral activity correlated with the concentration of drug recovered. Combinations of TDF with IQP-0528 protected in both in vitro models.

Conclusions

Together, these models suggest that intracellularly retained drugs such as TDF may protect resident immune cells following coitus but sustained delivery may be required to protect immune cells subsequently recruited into the genital tract. Sustained delivery may also be critical for NNRTIs, which are rapidly transported out of cells and could be lost following sexual intercourse. An ideal approach may be a combination of drugs with complementary bioavailability profiles formulated for sustained delivery.

Intravaginal ring eluting tenofovir disoproxil fumarate completely protects macaques from multiple vaginal simian-HIV challenges

Topical preexposure prophylaxis interrupts HIV transmission at the site of mucosal exposure. Intermittently dosed vaginal gels containing the HIV-1 reverse transcriptase inhibitor tenofovir protected pigtailed macaques depending on the timing of viral challenge relative to gel application. However, modest or no protection was observed in clinical trials. Intravaginal rings (IVRs) may improve efficacy by providing long-term sustained drug delivery leading to constant mucosal antiretroviral concentrations and enhancing adherence. Although a few IVRs have entered the clinical pipeline, 100% efficacy in a repeated macaque vaginal challenge model has not been achieved. Here we describe a reservoir IVR technology that delivers the tenofovir prodrug tenofovir disoproxil fumarate (TDF) continuously over 28 d. With four monthly ring changes in this repeated challenge model, TDF IVRs generated reproducible and protective drug levels. All TDF IVR-treated macaques (n = 6) remained seronegative and simian-HIV RNA negative after 16 weekly vaginal exposures to 50 tissue culture infectious dose SHIV162p3. In contrast, 11/12 control macaques became infected, with a median of four exposures assuming an eclipse of 7 d from infection to virus RNA detection. Protection was associated with tenofovir levels in vaginal fluid [mean 1.8 × 10(5) ng/mL (range 1.1 × 10(4) to 6.6 × 10(5) ng/mL)] and ex vivo antiviral activity of cervicovaginal lavage samples. These observations support further advancement of TDF IVRs as well as the concept that extended duration drug delivery devices delivering topical antiretrovirals could be effective tools in preventing the sexual transmission of HIV in humans.

Osmotic pump tablets for delivery of antiretrovirals to the vaginal mucosa

Vaginal pre-exposure prophylaxis has focused heavily on gel formulations. Low adherence linked with frequent dosing and short therapeutic duration has emerged as the major reason for inconsistent efficacy outcomes with gels in clinical trials. Osmotic pumps can achieve versatile drug release profiles however, have not been explored for vaginal delivery. In this report, we describe an osmotic pump tablet (OPT) that can deliver antiretrovirals for several days. We also describe configuring the OPT for pH sensitive delivery where the drug delivery system consistently delivers an antiretroviral at vaginal pH and then gives a burst release triggered by a coitally associated pH increase. We have investigated the vaginal OPT for multiple day delivery of a potent antiretroviral, IQP-0528 in a sheep model. To effectively register spatial drug distribution we also engineered a tool to precisely collect multiple vaginal fluid samples. In a 10-day duration post single application, high micromolar mucosal levels were obtained with peak concentration more than 6 logs higher than the EC50 of IQP-0528. Overall, our results show successful implementation of the osmotic pump technology for vaginal antiretroviral delivery.

Current status of topical antiretroviral chemoprophylaxis

PURPOSE OF REVIEW

Recent studies suggest that the vaginal delivery of antiretroviral (ARV) agents - such as tenofovir, dapivirine and UC781 - may be a promising way to reduce the high rates of HIV infection among women in developing countries. This review examines these developments.

RECENT FINDINGS

The Microbicide Trials Network 003 study, a large phase IIb trial, was unable to show that daily dosing with 1% tenofovir vaginal gel was effective for HIV prevention. Nevertheless, preclinical and early-phase clinical trials suggest that ARV drugs - formulated in vaginal gels, rings, films, tablets and diaphragms - could be effective for HIV chemoprophylaxis.

SUMMARY

Investigations of topical chemoprophylaxis methods have seen mixed results in the past 12-18 months. Product adherence may prove to be one of the field's greatest challenges. Phase II and III trials continue to explore different dosing strategies for topical products that contain one or more ARV agents.

Microbicide dosage forms

Microbicides are topically applied, user controlled dosage forms that are being developed to prevent the transmission of HIV during coitus. Early candidates focused on coitally dependent dosage forms such as gels and creams. More recent development has focused on broadening the coitally dependent options through the introduction of films and fast dissolving tablets. Additionally, it has become important to have longer acting products to minimize the burden of user compliance and thus vaginal rings have been developed providing sustained delivery of antiretroviral drugs. This chapter discusses the history of microbicides along with a detailed description of coitally dependent products, gels, films, tablets diaphragms, as well as coitally independent dosage forms such as vaginal rings and the introduction of a new technology, electrospun fibers.

A perspective on progress and gaps in HIV prevention science

In the past few years, the transdisciplinary field of HIV prevention has reached several milestones. Topically applied tenofovir gel provided significant protection from sexual transmission of HIV in a large-scale clinical trial and oral Truvada (emtricitabine/tenofovir disoproxil fumarate) was recently approved for preexposure prophylaxis (PrEP) following two successful clinical trials in men and women. These achievements are tempered by the disappointing results of other clinical trials, which highlight the complexities of prevention research. In this perspective, we discuss scientific and developmental gaps for topical chemoprophylaxis of the sexual transmission of HIV, which depends on the complex interactions between the pharmacokinetics and pharmacodynamics of drugs, formulation and delivery systems, anatomic site of transmission, and host mucosal immune defenses. Despite the considerable time and resources devoted to unraveling the initial steps in sexual transmission of HIV, current knowledge is based on animal models and human explanted tissue, which may not fully recapitulate what happens clinically. Understanding these events, including the role that sex hormones, semen, and mucosal secretions play in transmission, and the interplay between innate immunity, the mucosal environment, and drug efficacy is paramount. This drives some of the most pressing questions in the field.

Pharmacokinetics and efficacy of a vaginally administered maraviroc gel in rhesus macaques

OBJECTIVES

To investigate the pharmacokinetics (PK) of maraviroc, a CCR5-targeted HIV-1 entry inhibitor, in rhesus macaques following vaginal administration of various maraviroc-loaded aqueous hydroxyethylcellulose (HEC) gels, and to correlate the PK data with efficacy in a single high-dose vaginal SHIV-162P3 challenge model.

METHODS

Maraviroc concentrations in vaginal fluid (Weck-Cel(®) sponge), vaginal tissue (punch biopsy) and plasma were assessed over 72 h following single-dose vaginal application of various maraviroc-loaded HEC gels. The range of maraviroc gel concentrations was sufficiently broad (0.003%-3.3% w/w) that test gels included both fully solubilized and predominantly dispersed formulations. The efficacy of the HEC gels against a single high-dose vaginal SHIV-162P3 challenge was also measured, and correlated with the PK concentrations.

RESULTS

Maraviroc concentrations in vaginal fluid (range 10(4)-10(7) ng/mL), vaginal tissue (100-1200 ng/g) and plasma (<10(2) ng/mL) were highly dependent on maraviroc gel loading, irrespective of the form of the maraviroc component within the gel (solubilized versus dispersed). Fluid and plasma concentrations were generally highest 0.5 or 2 h after gel application, before declining steadily through to 72 h. Maraviroc concentrations in the various biological compartments correlated strongly with the extent of protection against vaginal SHIV-162P3 challenge. Complete protection was achieved with a 3.3% w/w maraviroc gel.

CONCLUSIONS

A high degree of correlation between PK and efficacy was observed. Based on the data obtained with the 3.3% w/w maraviroc gel, maintenance of vaginal fluid and tissue levels in the order of 10(7) ng/mL and 10(3) ng/g, respectively, are required for complete protection with this compound.

Partial protection against multiple RT-SHIV162P3 vaginal challenge of rhesus macaques by a silicone elastomer vaginal ring releasing the NNRTI MC1220

OBJECTIVES

The non-nucleoside reverse transcriptase inhibitor MC1220 has potent in vitro activity against HIV type 1 (HIV-1). A liposome gel formulation of MC1220 has previously been reported to partially protect rhesus macaques against vaginal challenge with a simian HIV (SHIV). Here, we describe the pre-clinical development of an MC1220-releasing silicone elastomer vaginal ring (SEVR), including pharmacokinetic (PK) and efficacy studies in macaques.

METHODS

In vitro release studies were conducted on SEVRs loaded with 400 mg of MC1220, using simulated vaginal fluid (SVF, n = 4) and 1 : 1 isopropanol/water (IPA/H(2)O, n = 4) as release media. For PK evaluation, SEVRs were inserted into adult female macaques (n = 6) for 30 days. Following a 1 week washout period, fresh rings were placed in the same animals, which were then challenged vaginally with RT-SHIV162P3 once weekly for 4 weeks.

RESULTS

SEVRs released 1.66 and 101 mg of MC1220 into SVF and IPA/H(2)O, respectively, over 30 days, the differential reflecting the low aqueous solubility of the drug. In macaque PK studies, MC1220 was consistently detected in vaginal fluid (peak 845 ng/mL) and plasma (peak 0.91 ng/mL). Kaplan-Meier analysis over 9 weeks showed significantly lower infection rates for animals given MC1220-containing SEVRs than placebo rings (hazard ratio 0.20, P = 0.0037).

CONCLUSIONS

An MC1220-releasing SEVR partially protected macaques from vaginal challenge. Such ring devices are a practical method for providing sustained, coitally independent protection against vaginal exposure to HIV-1.

A 90-day tenofovir reservoir intravaginal ring for mucosal HIV prophylaxis

A vaginal gel containing the antiretroviral tenofovir (TFV) recently demonstrated 39% protection against HIV infection in women. We designed and evaluated a novel reservoir TFV intravaginal ring (IVR) to potentially improve product effectiveness by providing a more controlled and sustained vaginal dose to maintain cervicovaginal concentrations. Polyurethane tubing of various hydrophilicities was filled with a high-density TFV/glycerol/water semisolid paste and then end-sealed to create IVRs. In vitro, TFV release increased with polyurethane hydrophilicity, with 35 weight percent water-swelling polyurethane IVRs achieving an approximately 10-mg/day release for 90 days with mechanical stiffness similar to that of the commercially available NuvaRing. This design was evaluated in two 90-day in vivo sheep studies for TFV pharmacokinetics and safety. Overall, TFV vaginal tissue, vaginal fluid, and plasma levels were relatively time independent over the 90-day duration at approximately 10(4) ng/g, 10(6) ng/g, and 10(1) ng/ml, respectively, near or exceeding the highest observed concentrations in a TFV 1% gel control group. TFV vaginal fluid concentrations were approximately 1,000-fold greater than levels shown to provide significant protection in women using the TFV 1% gel. There were no toxicological findings following placebo and TFV IVR treatment for 28 or 90 days, although slight to moderate increases in inflammatory infiltrates in the vaginal epithelia were observed in these animals compared to naïve animals. In summary, the controlled release of TFV from this reservoir IVR provided elevated sheep vaginal concentrations for 90 days to merit its further evaluation as an HIV prophylactic.

Safety and pharmacokinetics of intravaginal rings delivering tenofovir in pig-tailed macaques

Antiretroviral-based microbicides applied topically to the vagina may play an important role in protecting women from HIV infection. Incorporation of the nucleoside reverse transcriptase inhibitor tenofovir (TFV) into intravaginal rings (IVRs) for sustained mucosal delivery may lead to increased microbicide product adherence and efficacy compared with those of conventional vaginal formulations. Formulations of a novel "pod IVR" platform spanning a range of IVR drug loadings and daily release rates of TFV were evaluated in a pig-tailed macaque model. The rings were safe and exhibited sustained release at controlled rates over 28 days. Vaginal secretion TFV levels were independent of IVR drug loading and were able to be varied over 1.5 log units by changing the ring configuration. Mean TFV levels in vaginal secretions were 72.4 ± 109 μg ml(-1) (slow releasing) and 1.84 ± 1.97 mg ml(-1) (fast releasing). The mean TFV vaginal tissue concentration from the slow-releasing IVRs was 76.4 ± 54.8 μg g(-1) and remained at steady state 7 days after IVR removal, consistent with the long intracellular half-life of TFV. Intracellular tenofovir diphosphate (TFV-DP), the active moiety in defining efficacy, was measured in vaginal lymphocytes collected in the study using the fast-releasing IVR formulation. Mean intracellular TFV-DP levels of 446 ± 150 fmol/10(6) cells fall within a range that may be protective of simian-human immunodeficiency virus strain SF162p3 (SHIV(SF162p3)) infection in nonhuman primates. These data suggest that TFV-releasing IVRs based on the pod design have potential for the prevention of transmission of human immunodeficiency virus type 1 (HIV-1) and merit further clinical investigation.

Quantitative evaluation of a hydrophilic matrix intravaginal ring for the sustained delivery of tenofovir

In vitro testing and quantitative analysis of a matrix, hydrophilic polyether urethane (HPEU) intravaginal ring (IVR) for sustained delivery of the anti-HIV agent tenofovir (TFV) are described. To aid in device design, we employed a pseudo-steady-state diffusion model to describe drug release, as well as an elastic mechanical model for ring compression to predict mechanical properties. TFV-HPEU IVRs of varying sizes and drug loadings were fabricated by hot-melt extrusion and injection molding. In vitro release rates of TFV were measured at 37 °C and pH 4.2 for 30 or 90 days, during which times IVR mechanical properties and swelling kinetics were monitored. Experimental data for drug release and mechanical properties were compared to model predictions. IVRs loaded with 21% TFV (w/w) released greater than 2mg TFV per day for 90 days. The diffusion model predicted 90 day release data by extrapolating forward from the first 7 days of data. Mechanical properties of IVRs were similar to NuvaRing, although the matrix elastic modulus decreased up to three-fold following hydration. This is the first vaginal dosage form to provide sustained delivery of milligram quantities of TFV for 90 days. Drug release and mechanical properties were approximated by analytical models, which may prove useful for the continuing development of IVRs for HIV prevention or other women's health indications.

An intravaginal ring that releases the NNRTI MIV-150 reduces SHIV transmission in macaques

Microbicides may prevent HIV and sexually transmitted infections (STIs) in women; however, determining the optimal means of delivery of active pharmaceutical ingredients remains a major challenge. We previously demonstrated that a vaginal gel containing the non-nucleoside reverse transcriptase inhibitor MIV-150 partially protected macaques from SHIV-RT (simian/HIV reverse transcriptase) infection, and the addition of zinc acetate rendered the gel significantly protective. We test the activity of MIV-150 without the addition of zinc acetate when delivered from either ethylene vinyl acetate (EVA) or silicone intravaginal rings (IVRs). MIV-150 was successfully delivered, because it was detected in vaginal fluids and tissues by radioimmunoassay in pharmacokinetic studies. Moreover, EVA IVRs significantly protected macaques from SHIV-RT infection. Our results demonstrate that MIV-150-containing IVRs have the potential to prevent HIV infection and highlight the possible use of IVRs for delivering drugs that block HIV and other STIs.