Effects of engineered cerium oxide nanoparticles on bacterial growth and viability

Surfactant-Free Synthesis of Melon Seed-Like CeO2 and Ho@CeO2 Nanostructures with Enriched Oxygen Vacancies: Characterization and Their Enhanced Antibacterial Properties

To overcome the poor antibacterial performance of cerium oxide (CeO2) nanoparticles at low concentrations, melon seed-shaped CeO2 (MS-CeO2) and holmium (Ho)-doped CeO2 (Ho@MS-CeO2) nanoparticles were synthesized using a simple precipitation method without the addition of any surfactants. The surface morphology, phase structure, crystallinity, Ce3+ and Ce4+ valence, lattice defects, and reactive oxygen species (ROS) production of both synthesized nanostructures were examined using different techniques, i.e., scanning electron microscopy (SEM), energydispersive X-ray (EDX), resolution transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), Raman spectroscopy, ultraviolet (UV) spectra, fluorescence spectra, and zeta potential (ζ). The results show that under certain stirring and aging temperatures, CeO2 and Ho-doped CeO2 nanoparticles with a melon seed-like morphology can be prepared in a short period. Both nanoparticles were tested as antiseptic agents against G+ and G - bacteria (E. coli and S. aureus), and the results confirmed that the Ho@MS-CeO2 nanostructures exhibited remarkable antimicrobial activity at a low concentration (0.5 mg/L) compared with the control group, which is attributed to the reversible conversion of Ce3+ and Ce4+ in the ceria crystal lattice, enriched oxygen vacancy, ROS species production, and positive surface charge.

Carbon Nanodot-Microbe-Plant Nexus in Agroecosystem and Antimicrobial Applications

The intensive applications of nanomaterials in the agroecosystem led to the creation of several environmental problems. More efforts are needed to discover new insights in the nanomaterial-microbe-plant nexus. This relationship has several dimensions, which may include the transport of nanomaterials to different plant organs, the nanotoxicity to soil microbes and plants, and different possible regulations. This review focuses on the challenges and prospects of the nanomaterial-microbe-plant nexus under agroecosystem conditions. The previous nano-forms were selected in this study because of the rare, published articles on such nanomaterials. Under the study's nexus, more insights on the carbon nanodot-microbe-plant nexus were discussed along with the role of the new frontier in nano-tellurium-microbe nexus. Transport of nanomaterials to different plant organs under possible applications, and translocation of these nanoparticles besides their expected nanotoxicity to soil microbes will be also reported in the current study. Nanotoxicity to soil microbes and plants was investigated by taking account of morpho-physiological, molecular, and biochemical concerns. This study highlights the regulations of nanotoxicity with a focus on risk and challenges at the ecological level and their risks to human health, along with the scientific and organizational levels. This study opens many windows in such studies nexus which are needed in the near future.

Harnessing cerium-based biomaterials for the treatment of bone diseases

Bone, an actively metabolic organ, undergoes constant remodeling throughout life. Disturbances in the bone microenvironment can be responsible for pathologically bone diseases such as periodontitis, osteoarthritis, rheumatoid arthritis and osteoporosis. Conventional bone tissue biomaterials are not adequately adapted to complex bone microenvironment. Therefore, there is an urgent clinical need to find an effective strategy to improve the status quo. In recent years, nanotechnology has caused a revolution in biomedicine. Cerium(III, IV) oxide, as an important member of metal oxide nanomaterials, has dual redox properties through reversible binding with oxygen atoms, which continuously cycle between Ce(III) and Ce(IV). Due to its special physicochemical properties, cerium(III, IV) oxide has received widespread attention as a versatile nanomaterial, especially in bone diseases. This review describes the characteristics of bone microenvironment. The enzyme-like properties and biosafety of cerium(III, IV) oxide are also emphasized. Meanwhile, we summarizes controllable synthesis of cerium(III, IV) oxide with different nanostructural morphologies. Following resolution of synthetic principles of cerium(III, IV) oxide, a variety of tailored cerium-based biomaterials have been widely developed, including bioactive glasses, scaffolds, nanomembranes, coatings, and nanocomposites. Furthermore, we highlight the latest advances in cerium-based biomaterials for inflammatory and metabolic bone diseases and bone-related tumors. Tailored cerium-based biomaterials have already demonstrated their value in disease prevention, diagnosis (imaging and biosensors) and treatment. Therefore, it is important to assist in bone disease management by clarifying tailored properties of cerium(III, IV) oxide in order to promote the use of cerium-based biomaterials in the future clinical setting. STATEMENT OF SIGNIFICANCE: In this review, we focused on the promising of cerium-based biomaterials for bone diseases. We reviewed the key role of bone microenvironment in bone diseases and the main biological activities of cerium(III, IV) oxide. By setting different synthesis conditions, cerium(III, IV) oxide nanostructures with different morphologies can be controlled. Meanwhile, tailored cerium-based biomaterials can serve as a versatile toolbox (e.g., bioactive glasses, scaffolds, nanofibrous membranes, coatings, and nanocomposites). Then, the latest research advances based on cerium-based biomaterials for the treatment of bone diseases were also highlighted. Most importantly, we analyzed the perspectives and challenges of cerium-based biomaterials. In future perspectives, this insight has given rise to a cascade of cerium-based biomaterial strategies, including disease prevention, diagnosis (imaging and biosensors) and treatment.

Biogenesis of bacterial cellulose/xanthan/CeO2NPs composite films for active food packaging

The increasing significance of biopolymer-based food packaging can be attributed to its biodegradability and independence from petroleum-derived materials. Concurrently, metal oxide nanoparticles (NPs) have gained prominence as effective antimicrobial agents against both wild-type and antibiotic-resistant microbes. In this study, cerium oxide or ceria, CeO2, nanoparticles with an average diameter of 50 nm were synthesized via a green method utilizing Vibrio sp. VLC cell lysate supernatant. The synthesized CeO2 NPs displayed remarkable antimicrobial properties, inhibiting the growth of Escherichia coli and Staphylococcus aureus by 93.7 % and 98 %, respectively. To enhance the potential of bacterial cellulose (BC) for advanced applications, we developed a BC/xanthan/CeO2 nanocomposite using both ex situ and in situ techniques. The integration of CeO2 NPs within the nanocomposite structure not only improved the inherent properties of BC, but also rendered it suitable for use in active food packaging systems. The nanocomposite exhibited no significant cytotoxicity on the human dermal fibroblast (HDF) cells, confirming its safety. Nanocomposites containing biogenically synthesized CeO2 NPs demonstrated exceptional efficacy for reducing microbial contamination. Bread samples coated with nanocomposite films displayed no signs of microbial growth. These results support the application of BC/xanthan/CeO2 nanocomposites as suitable and effective coating materials for antimicrobial food packaging applications.

Electrospun Composites of Chitosan with Cerium Oxide Nanoparticles for Wound Healing Applications: Characterization and Biocompatibility Evaluation In Vitro and In Vivo

Cerium oxide nanoparticles (CeONPs), as part of tissue regeneration matrices, can protect cells from reactive oxygen species and oxidative stress. In addition, they can influence the properties of the scaffold, including its electrospinnability and mechanical strength. In this work, we prepared electrospun fiber mats from a chitosan and polyethylene oxide blend (CS-PEO) with the addition of ceria nanoparticles (CS-PEO-CeONP). The addition of CeONPs resulted in a smaller fiber diameter and higher swelling compared to CS-PEO fiber mats. CeONP-modified fiber mats also had a higher Young's modulus due to the reinforcing effect of the nanoparticles. Both mats had comparable adhesion and cytocompatibility to mesenchymal stem cells, which had a more rounded morphology on CS-PEO-CeONP compared to elongated cells on the CS-PEO mats. Biocompatibility in an in vivo rat model showed no acute toxicity, no septic or allergic inflammation, and no rough scar tissue formation. The degradation of both mats passed the stage of matrix swelling. CS-PEO-CeONP showed significantly slower biodegradation, with most of the matrix remaining in the tissue after 90 days. The reactive inflammation was aseptic in nature with the involvement of multinucleated foreign-body type giant cells and was significantly reduced by day 90. CeONPs induced the formation of the implant's connective tissue capsule. Thus, the introduction of CeONPs influenced the physicochemical properties and biological activity of CS-PEO nanofiber mats.

A neoteric antibacterial ceria-silver nanozyme for abiotic surfaces

Community-associated and hospital-acquired infections caused by bacteria continue to yield major global challenges to human health. Bacterial contamination on abiotic surfaces is largely spread via high-touch surfaces and contemporary standard disinfection practices show limited efficacy, resulting in unsatisfactory therapeutic outcomes. New strategies that offer non-specific and broad protection are urgently needed. Herein, we report our novel ceria-silver nanozyme engineered at a molar ratio of 5:1 and with a higher trivalent (Ce3+) surface fraction. Our results reveal potent levels of surface catalytic activity on both wet and dry surfaces, with rapid, and complete eradication of Pseudomonas aeruginosa, Staphylococcus aureus, and methicillin resistant S. aureus, in both planktonic and biofilm form. Preferential electrostatic adherence of anionic bacteria to the cationic nanozyme surface leads to a catastrophic loss in both aerobic and anaerobic respiration, DNA damage, osmodysregulation, and finally, programmed bacterial lysis. Our data reveal several unique mechanistic avenues of synergistic ceria-Ag efficacy. Ag potentially increases the presence of Ce3+ sites at the ceria-Ag interface, thereby facilitating the formation of harmful H2O2, followed by likely permeation across the cell wall. Further, a weakened Ag-induced Ce-O bond may drive electron transfer from the Ec band to O2, thereby further facilitating the selective reduction of O2 toward H2O2 formation. Ag destabilizes the surface adsorption of molecular H2O2, potentially leading to higher concentrations of free H2O2 adjacent to bacteria. To this end, our results show that H2O2 and/or NO/NO2-/NO3- are the key liberators of antibacterial activity, with a limited immediate role being offered by nanozyme-induced ROS including O2•- and OH•, and likely other light-activated radicals. A mini-pilot proof-of-concept study performed in a pediatric dental clinic setting confirms residual, and continual nanozyme antibacterial efficacy over a 28-day period. These findings open a new approach to alleviate infections caused by bacteria for use on high-touch hard surfaces.

Versatile Antibacterial and Antioxidant Bacterial Cellulose@Nanoceria Biotextile: Application in Reusable Antimicrobial Face Masks

Despite considerable interest in medical and pharmaceutical fields, there remains a notable absence of functional textiles that concurrently exhibit antibacterial and antioxidant properties. Herein, a new composite fabric constructed using nanostructured bacterial cellulose (BC) covalently-linked with cerium oxide nanoparticles (BC@CeO2NPs) is introduced. The synthesis of CeO2NPs on the BC is performed via a microwave-assisted, in situ chemical deposition technique, resulting in the formation of mixed valence Ce3+/Ce4+ CeO2NPs. This approach ensures the durability of the composite fabric subjected to multiple washing cycles. The Reactive oxygen species (ROS) scavenging activity of CeO2NPs and their rapid and efficient eradication of >99% model microbes, such as Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus remain unaltered in the composite. To demonstrate the feasibility of incorporating the fabric in marketable products, antimicrobial face masks are fabricated with filter layers made of BC@CeO2NPs cross-linked with propylene or cotton fibers. These masks exhibit complete inhibition of bacterial growth in the three bacterial strains, improved breathability compared to respirator masks and enhanced filtration efficiency compared to single-use surgical face masks. This study provides valuable insights into the development of functional BC@CeO2NPs biotextiles in which design can be extended to the fabrication of medical dressings and cosmetic products with combined antibiotic, antioxidant and anti-inflammatory activities.

Incorporation of hydroxyapatite and cerium oxide nanoparticle scaffold as an antibacterial filler matrix for biomedical applications

Managing bone healing is essential for preventing problems such as non-union, bacterial infection, structural instability, psychological, and physical damage in patients. The need to use antibiotics less often has prompted researchers to look at possible substitutes, such as nanoparticles. In this investigation, we choose to employ cerium oxide nanoparticles due to their unique antibacterial properties based on redox reactions. The cerium oxide-hydroxyapatite composite was synthesized, calcined, and ball-milled to create a fine CeO2-HA powder. Luffa cylindrica sponge was used to prepare the scaffold, and X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to investigate the structural and morphological features. Rapid upregulation of osteogenesis marker genes confirmed that CeO2-HA nanoparticles in the scaffolds promoted osteoblast cell proliferation and osteogenic differentiation. The cell viability test was conducted by MTT assay. When the CeO2-HA composite was cultured with S. aureus, it showed signs of having more antibacterial efficacy than pure HA.

CeO2 Nanoparticles to Promote Wound Healing: A Systematic Review

Cerium (Ce) is a hot topic in the field of materials research due to its electronic layer structure and the unique antioxidant abilities of its oxide (CeO2 ). Cerium oxide nanoparticles (CeO2 NPs) demonstrate their potential as an antioxidant and antibacterial agent. Current research focuses on whether they can be used to promote wound healing and in what manner. This article provides a systematic review of the various forms of CeO2 NPs that are used in wound-healing materials over the past decade, as well as the effectiveness demonstrated by in vivo and in vitro experiments, with a focus on the relationship between concentration and effectiveness. CeO2 NPs are expected to become effective ingredients in dressings that require antibacterial, antioxidant, and wound healing promoting properties. This article serves as a reference for further research and clinical applications of nano-sized CeO2 in wound healing.

Antimicrobial Activity of Citrate-Coated Cerium Oxide Nanoparticles

The purpose of this study was to investigate the antimicrobial activity of citrate-stabilized sols of cerium oxide nanoparticles at different concentrations via different microbiological methods and to compare the effect with the peroxidase activity of nanoceria for the subsequent development of a regeneration-stimulating medical and/or veterinary wound-healing product providing new types of antimicrobial action. The object of this study was cerium oxide nanoparticles synthesized from aqueous solutions of cerium (III) nitrate hexahydrate and citric acid (the size of the nanoparticles was 3-5 nm, and their aggregates were 60-130 nm). Nanoceria oxide sols with a wide range of concentrations (10-1-10-6 M) as well as powder (the dry substance) were used. Both bacterial and fungal strains (Bacillus subtilis, Bacillus cereus, Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, Proteus vulgaris, Candida albicans, Aspergillus brasielensis) were used for the microbiological studies. The antimicrobial activity of nanoceria was investigated across a wide range of concentrations using three methods sequentially; the antimicrobial activity was studied by examining diffusion into agar, the serial dilution method was used to detect the minimum inhibitory and bactericidal concentrations, and, finally, gas chromatography with mass-selective detection was performed to study the inhibition of E. coli's growth. To study the redox activity of different concentrations of nanocerium, we studied the intensity of chemiluminescence in the oxidation reaction of luminol in the presence of hydrogen peroxide. As a result of this study's use of the agar diffusion and serial dilution methods followed by sowing, no significant evidence of antimicrobial activity was found. At the same time, in the current study of antimicrobial activity against E. coli strains using gas chromatography with mass spectrometry, the ability of nanoceria to significantly inhibit the growth and reproduction of microorganisms after 24 h and, in particular, after 48 h of incubation at a wide range of concentrations, 10-2-10-5 M (48-95% reduction in the number of microbes with a significant dose-dependent effect) was determined as the optimum concentration. A reliable redox activity of nanoceria coated with citrate was established, increasing in proportion to the concentration, confirming the oxidative mechanism of the action of nanoceria. Thus, nanoceria have a dose-dependent bacteriostatic effect, which is most pronounced at concentrations of 10-2-10-3 M. Unlike the effects of classical antiseptics, the effect was manifested from 2 days and increased during the observation. To study the antimicrobial activity of nanomaterials, it is advisable not to use classical qualitative and semi-quantitative methods; rather, the employment of more accurate quantitative methods is advised, in particular, gas chromatography-mass spectrometry, during several days of incubation.

Investigating temperature variability on antioxidative behavior of synthesized cerium oxide nanoparticle for potential biomedical application

Cerium oxide nanoparticles (CNP) have garnered significant attention due to their versatile redox properties and wound-healing applications. The antioxidative nature of CNP is due to its ability to be oxidized and reduced, followed by the capture or release of oxygen which is used for scavenging reactive oxygen species (ROS). Herein, CNP is produced through a wet chemistry approach and its tunable redox property is tested across a range of temperatures. The synthesized CNP was observed to reveal the signature peak at 245 nm indicating a high Ce+3/Ce+4 ratio. Towards evaluating the redox antioxidative behavior, CNPs were subjected to a comprehensive analysis for superoxide dismutase mimetic analysis with riboflavin-mediated nitroblue tetrazolium scavenging assay. The results demonstrated that the redox activity of cerium oxide nanoparticles was strongly influenced by the different temperature ranges. Superoxide dismutase mimetic activity was observed to be reduced with a decrease in temperature as we moved from 4°C (80% activity) to -80°C (47% activity) at 1 mM conc of CNP. Similarly, the SOD mimetic activity increased with an increase in temperature from 40°C (72% activity) to 70°C (94% activity). Further, CNP was found to inhibit E. coli (gram+ve) and Enterobacter (gram-ve) beyond 70% simultaneously at 1 mM conc, indicating its potential application as a remarkable antimicrobial agent. CNP also inhibited the alpha-amylase activity up to the 60% at 1 mM conc suggesting its potential application in antidiabetic wound healing therapy. Overall, the CNP finds its application in mitigating the oxidative stress-related disorder exhibited by its high antioxidative, antimicrobial, and antidiabetic behavior.

Phytofabricated bimetallic synthesis of silver-copper nanoparticles using Aerva lanata extract to evaluate their potential cytotoxic and antimicrobial activities

In this study, we demonstrate the green synthesis of bimetallic silver-copper nanoparticles (Ag-Cu NPs) using Aerva lanata plant extract. These NPs possess diverse biological properties, including in vitro antioxidant, antibiofilm, and cytotoxic activities. The synthesis involves the reduction of silver nitrate and copper oxide salts mediated by the plant extract, resulting in the formation of crystalline Ag-Cu NPs with a face-centered cubic structure. Characterization techniques confirm the presence of functional groups from the plant extract, acting as stabilizing and reducing agents. The synthesized NPs exhibit uniform-sized spherical morphology ranging from 7 to 12 nm. They demonstrate significant antibacterial activity against Staphylococcus aureus and Pseudomonas aeruginosa, inhibiting extracellular polysaccharide secretion in a dose-dependent manner. The Ag-Cu NPs also exhibit potent cytotoxic activity against cancerous HeLa cell lines, with an inhibitory concentration (IC50) of 17.63 µg mL-1. Additionally, they demonstrate strong antioxidant potential, including reducing capability and H2O2 radical scavenging activity, particularly at high concentrations (240 µg mL-1). Overall, these results emphasize the potential of A. lanata plant metabolite-driven NPs as effective agents against infectious diseases and cancer.

Remineralization of Dentin with Cerium Oxide and Its Potential Use for Root Canal Disinfection

Objective

This study was to investigate a novel antibacterial biomimetic mineralization strategy for exploring its potential application for root canal disinfection when stabilized cerium oxide was used.

Material and Methods

A biomimetic mineralization solution (BMS) consisting of cerium nitrate and dextran was prepared. Single-layer collagen fibrils, collagen membranes, demineralized dentin, and root canal system were treated with the BMS for mineralization. The mineralized samples underwent comprehensive characterization using various techniques, including transmission electron microscopy (TEM), high-resolution TEM (HRTEM), Fourier transform infrared spectroscopy (FTIR), scanning transmission electron microscopy (STEM), selected-area electron diffraction (SAED), energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and micro-CT. Additionally, the antimicrobial properties of the BMS and the remineralized dentin were also analyzed with broth microdilution method, live/dead staining, and SEM.

Results

Cerium ions in the BMS underwent a transformation into cerium oxide nanoparticles, which were deposited in the inter- and intra-fibrillar collagen spaces through a meticulous bottom-up process. XPS analysis disclosed the presence of both Ce (III) and Ce (IV) of the generated cerium oxides. A comprehensive examination utilizing SEM and micro-CT identified the presence of cerium oxide nanoparticles deposited within the dentinal tubules and lateral canals of the root canal system. The BMS and remineralized dentin exhibited substantial antibacterial efficacy against E. faecalis, as substantiated by assessments involving the broth dilution method and live/dead staining technique. The SEM findings revealed the cell morphological changes of deceased E. faecalis.

Conclusion

This study successfully demonstrated antibacterial biomimetic mineralization as well as sealing dentinal tubules and lateral branches of root canals using cerium nitrate and dextran. This novel biomimetic mineralization could be used as an alternative strategy for root canal disinfection.

Coating of Filter Materials with CeO2 Nanoparticles Using a Combination of Aerodynamic Spraying and Suction

Textiles and nonwovens (including those used in ventilation systems as filters) are currently one of the main sources of patient cross-infection. Healthcare-associated infections (HAIs) affect 5-10% of patients and stand as the tenth leading cause of death. Therefore, the development of new methods for creating functional nanostructured coatings with antibacterial and antiviral properties on the surfaces of textiles and nonwoven materials is crucial for modern medicine. Antimicrobial filter technology must be high-speed, low-energy and safe if its commercialization and mass adoption are to be successful. Cerium oxide nanoparticles can act as active components in these coatings due to their high antibacterial activity and low toxicity. This paper focuses on the elaboration of a high-throughput and resource-saving method for the deposition of cerium oxide nanoparticles onto nonwoven fibrous material for use in air-conditioning filters. The proposed spraying technique is based on the use of an aerodynamic emitter and simultaneous suction. Cerium oxide nanoparticles have successfully been deposited onto the filter materials used in air conditioning systems; the antibacterial activity of the ceria-modified filters exceeded 4.0.

Cerium oxide nanoparticles: Synthesis methods and applications in wound healing

Wound care and treatment can be critical from a clinical standpoint. While different strategies for the management and treatment of skin wounds have been developed, the limitations inherent in the current approaches necessitate the development of more effective alternative strategies. Advances in tissue engineering have resulted in the development of novel promising approaches for accelerating wound healing. The use of various biomaterials capable of accelerating the regeneration of damaged tissue is critical in tissue engineering. In this regard, cerium oxide nanoparticles (CeO2 NPs) have recently received much attention because of their excellent biological properties, such as antibacterial, anti-inflammatory, antioxidant, and angiogenic features. The incorporation of CeO2 NPs into various polymer-based scaffolds developed for wound healing applications has led to accelerated wound healing due to the presence of CeO2 NPs. This paper discusses the structure and functions of the skin, the wound healing process, different methods for the synthesis of CeO2 NPs, the biological properties of CeO2 NPs, the role of CeO2 NPs in wound healing, the use of scaffolds containing CeO2 NPs for wound healing applications, and the potential toxicity of CeO2 NPs.

Metallophore Activity toward the Rare Earth Elements by Bacteria Isolated from Acid Mine Drainage Due to Coal Mining

The field of microbe-metal interactions has been gaining significant attention. While the direct impact of metal oxyanions on bacteria has been investigated, significantly less attention has been placed on the ability of certain microbes to 'collect' such metal ions via secreted proteins. Many bacteria possess low-weight molecules called siderophores, which collect Fe from the environment to be brought back to the cell. However, some appear to have additional roles, including binding other metals, termed 'metallophores'. Microbes can remove/sequester these from their surroundings, but the breadth of those that can be removed is still unknown. Using the Chromeazurol S assay, we identified eight isolates, most belonging to the genus Pseudomonas, possessing siderophore activity, mainly from sites impacted by coal mine drainage, also possessing a metallophore activity toward the rare earth elements that does not appear to be related to ionic radii or previously reported EC50 concentrations for E. coli. We found the strength of metallophore activity towards these elements was as follows: Pr > Sc > Eu > Tm > Tb > Er > Yb > Ce > Lu > Sm > Ho > La > Nd > Dy > Gd > Y. This is the first study to investigate such activity and indicates bacteria may provide a means of removal/recovery of these critical elements.

Photothermal effective CeO2NPs combined in thermosensitive hydrogels with enhanced antibacterial, antioxidant and vascularization performance to accelerate infected diabetic wound healing

Chronic diabetic wound healing remains a formidable challenge due to susceptibility to bacterial infection, excessive oxidative stress, and poor angiogenesis. To address these issues, a sodium alginate (SA) based photothermal hydrogel dressing with multifunction was fabricated to facilitate wound treatment. Ceria nanoparticles (CeO2NPs) was synthesized, and their antibacterial performance by near-infrared light triggered photothermal effects was first studied and verified in this work. In addition, to release CeO2NPs to achieve antioxidation and pro-vascularization, thermosensitive gelatin (Gel) was utilized to embed the nanoparticles in advance and then composited in SA hydrogel networks. SA network was finally strengthened by acid soaking to form partially crystalline regions to act as natural crosslinkers. Results showed that the Gel/SA/CeO2 hydrogel displayed temperature-responsive release of CeO2NPs, significant antibacterial and antioxidative activity, as well as the ability to remove without injury and promote infected diabetic wound healing with low cytotoxicity, according to antibacterial investigations, cell studies, and in vivo animal studies. This research offers not only a successful method for quickening the healing of diabetic wounds but also a fresh approach to the general use of CeO2NPs.

Structural and functional insights in polysaccharides coated cerium oxide nanoparticles and their potential biomedical applications: A review

Cerium oxide nanoparticles have now significant presence in biomedical fields due to their wide applications; however, challenges regarding their safety and biocompatibility persist. Polysaccharides based biopolymers have inherent hydroxyl and carboxyl groups, enabling them to govern the surface functionalization of cerium oxide nanoparticles, hence their chemical and physical characteristics. Because of this, polysaccharides such as dextran, alginate, pullulan, chitosan, polylactic acid, starch, and pectin are practical substitutes for the conventional coatings used to synthesize cerium oxide nanoparticles. This review discusses the effect of biopolymer coatings on the properties of cerium oxide nanoparticles, such as size, stability, aggregation, and biocompatibility. Additionally, it also summarises various biomedical applications of polysaccharides coated cerium oxide nanoparticles, such as in bone tissue regeneration, liver inflammation, wound healing, and antibacterial and anticancer activities. Biocompatible cerium oxide nanoparticles will surely improve their applications in the biomedical field.

Nanoparticle Synthesis and Their Integration into Polymer-Based Fibers for Biomedical Applications

The potential of nanoparticles as effective drug delivery systems combined with the versatility of fibers has led to the development of new and improved strategies to help in the diagnosis and treatment of diseases. Nanoparticles have extraordinary characteristics that are helpful in several applications, including wound dressings, microbial balance approaches, tissue regeneration, and cancer treatment. Owing to their large surface area, tailor-ability, and persistent diameter, fibers are also used for wound dressings, tissue engineering, controlled drug delivery, and protective clothing. The combination of nanoparticles with fibers has the power to generate delivery systems that have enhanced performance over the individual architectures. This review aims at illustrating the main possibilities and trends of fibers functionalized with nanoparticles, focusing on inorganic and organic nanoparticles and polymer-based fibers. Emphasis on the recent progress in the fabrication procedures of several types of nanoparticles and in the description of the most used polymers to produce fibers has been undertaken, along with the bioactivity of such alliances in several biomedical applications. To finish, future perspectives of nanoparticles incorporated within polymer-based fibers for clinical use are presented and discussed, thus showcasing relevant paths to follow for enhanced success in the field.

Nano-Nd2O3 reduced soil bacterial community function by altering the relative abundance of rare and sensitive taxa

Nanoparticulate-Nd₂O₃ (nano-Nd₂O₃) has been excessively utilized in agriculture, industry, and medicine. Hence, nano-Nd₂O₃ can have environmental implications. However, the impact of nano-Nd₂O₃ on alpha diversity, composition, and function of soil bacterial communities has not been thoroughly evaluated. We amended soil to achieve different concentrations of nano-Nd₂O₃ (0, 10, 50, and 100 mg kg^-1 soil) and incubated the mesocosms for 60 days. On days 7 and 60 of the experiment, we measured the effect of nano-Nd₂O₃ on alpha diversity and composition of soil bacterial community. Further, the effect of nano-Nd₂O₃ on the function of soil bacterial community was assessed based on changes in the activities of the six potential enzymes that mediate the cycling of nutrients in the soil. Nano-Nd₂O₃ did not alter the alpha diversity and composition of the soil bacterial community; however, it negatively affected community function in a dose-dependent manner. Specifically, the activities of β-1,4-glucosidase and β-1,4-n-acetylglucosaminidase that mediate soil carbon and nitrogen cycling, respectively, were significantly affected on days 7 and 60 of the exposure. The effect of nano-Nd₂O₃ on the soil enzymes correlated with changes in relative abundances of the rare and sensitive taxa, viz., Isosphaerales, Isosphaeraceae, Ktedonobacteraceae, and Streptomyces. Overall, we provide information for the safe implementation of technological applications that use nano-Nd₂O₃.

Biointeraction of cerium oxide and neodymium oxide nanoparticles with pure culture methylobacterium extorquens AM1

Rare earth elements (REE) are valuable raw materials in our modern life. Extensive REE application from electronic devices to medical instruments and wind turbines, and non-uniform distribution of these resources around the world, make them strategically and economically important for countries. Current REE physical and chemical mining and recycling methods could have negative environmental consequences, and biologically-mediated techniques could be applied to overcome this issue. In this study, the bioextraction of cerium oxide and neodymium oxide nanoparticles (REE-NP) by a pure culture Methylobacterium extorquens AM1 (ATCC®14718™) was investigated in batch experiments. Results show that adding up to 1000 ppm CeO₂ or Nd₂O₃ nanoparticles (REE-NP) did not seem to affect the bacterial growth over 14-days contact time. Effect of methylamine hydrochloride as an essential electron donor and carbon source for microbial oxidation and growth was also observed inasmuch as there was approximately no growth when it does not exist in the medium. Although very low concentrations of cerium and neodymium in the liquid phase were measured, concentrations of 45 μg/g_cell Ce and 154 μg/g_cell Nd could be extracted by M. extorquens AM1. Furthermore, SEM-EDS and STEM-EDS confirmed surface and intracellular accumulation of nanoparticles. These results confirmed the ability of M. extorquens to accumulate REE nanoparticles.

Cerium oxide nanoparticles (nCeO2) exert minimal adverse effects on microbial communities in soils with and without biosolids amendment

Increased use of nano-cerium oxide (nCeO₂) in an array of industrial applications has raised environmental concerns due to potential increased loadings to the soil environment. This research investigated the potential adverse effects of nCeO₂ (10-30 nm) on the soil microbial community in two exposure scenarios: direct application to soil, and indirect application to soil through chemical spiking of biosolids, followed by mixing into soil. Total Ce in test soils without, and with biosolids amendment, ranged from 44 to 770, and 73 to 664 mg Ce kg^-1 soil, respectively. In order to help distinguish whether observed effects were elicited by the solid-phase colloids or the activity of dissolved Ce, a soluble Ce salt (Ce (NO₃)₃) treatment was included in select assays. A suite of tests was used to investigate effects on critical processes: microbial growth (heterotrophic plate count), microbial activity (organic matter (OM) decomposition, enzyme activity and, nitrification) and diversity (structural and functional). Although results showed significant inhibition on microbial growth in soil without biosolids amendment at ≥ 156 mg Ce kg^-1 soil by week 5, these results were inconsistent and non-significant thereafter. In general, nCeO₂ showed no evidence of consistent adverse effects on OM decomposition, nitrification, soil enzyme activities and functional diversity. Leucine aminopeptidase showed significant (p< 0.05) stimulatory effects over time at ≥ 44 mg Ce kg^-1 in soils without biosolids, which was not observed in soils with biosolids amendment. The lack of inhibitory effects of nCeO₂ may be attributed to its low solubility; Ce in soil extracts (0.01 M CaCl₂) were all below detection (< 0.003 mg kg^-1) in the nCeO₂-spiked soils, but detectable in the Ce (NO₃)₃ samples. In contrast, soluble Ce at 359 mg Ce kg^-1 showed a significant reduction in OM decomposition and effects on microbial genomic diversity based on the 16S rDNA data in soils with and without biosolids amendment (359 and 690 mg Ce kg^-1). The nCeO₂ behaviour and effects information described herein are expected to help fulfill data gaps for the characterization of this priority nanomaterial.

Oxidation and Nanoparticle Formation during Ce(III) Sorption onto Minerals

The sorption of Ce(III) on three abundant environmental minerals (goethite, anatase, and birnessite) was investigated. Batch sorption experiments using a radioactive ¹³⁹Ce tracer were performed to investigate the key features of the sorption process. Differences in sorption kinetics and changes in oxidation states were found in the case of the sorption of Ce(III) on birnessite compared to that on other minerals. Speciation of cerium onto all of the studied minerals was investigated using spectral and microscopic methods: high-resolution transmission electron microscopy (HRTEM), electron energy loss spectroscopy (EELS), and X-ray absorption spectroscopy (XAS) in conjunction with theoretical calculations. It was found that during the sorption process onto birnessite, Ce(III) was oxidized to Ce(IV), while the Ce(III) on goethite and anatase surfaces remained unchanged. Oxidation of Ce(III) by sorption on birnessite was also accompanied by the formation of CeO₂ nanoparticles on the mineral surface, which depended on the initial cerium concentration and pH value.

Inactivation mechanism of E. coli in water by enhanced photocatalysis under visible light irradiation

Developing efficient and economical technologies for drinking water disinfection remains a challenge. We synthesized Ag/AgBr/LDH doped with various silver mass concentrations and explored its ability to inactivate E. coli under visible light irradiation (λ ≥ 400 nm). Our results indicated a total inactivation of E. coli (10⁷ CFU·mL^-1) within 80 min using 2 % Ag/AgBr/LDH in a laboratory-scale test. The method was evaluated for disinfecting three effluent samples collected from one drinking water treatment plant, covering representative water treatment processes. After five consecutive runs, the inactivation efficiency decreased slightly to 89 % in CFU·mL^-1, indicating that the photocatalysts had excellent stability and reusability. The mechanisms were analyzed by combining chemical and biological methods. It was verified that singlet oxygen (¹O₂), hydrogen peroxide (H₂O₂), and photo-generated electrons (e^-) were significant contributors to the inactivation process. Scanning electron microscopy images analysis showed the disruption of the membrane integrity of E. coli by photocatalytic oxidation. Internal component leakage and reduced enzyme activity were also observed in terms of K⁺ leakage, β-galactosidase activity, and antioxidant enzyme activity. The results by the transcriptomic analysis implied that Ag/AgBr/LDH regulating the oxidative stress response and cell membrane damage related genes was the main inactivation mechanism.

Tea polyphenols mediated biogenic synthesis of chitosan-coated cerium oxide (CS/CeO2) nanocomposites and their potent antimicrobial capabilities

In the present study, we hypothesized that novel nanocomposites of chitosan-coated cerium oxide (CS/CeO₂ NCs) derived from aqueous extracts of tea polyphenols would be stabilized and reduced by using green chemistry. The UV-visible spectrum of the synthesized material revealed an SPR peak at 279 nm, and the morphological characteristics of nanoparticles (NPs) as a uniformly distributed spherical shape with a size range of 20 nm were confirmed by field emission scanning electron microscopy (FESEM). The Fourier transform infrared spectroscopy (FTIR) spectrum illustrated the amino groups of chitosan-coated with CeO₂ NPs on the surface. While, the hydrodynamic size (376 nm) and surface charge (+ 25.0 mV) of particles were assessed by dynamic light scattering (DLS), and the existence of oxidation state elements Ce 3d, O 1 s, and C 1 s was identified by employing X-ray photoelectron spectroscopy (XPS). A cubic fluorite polycrystalline structure with a crystallite size of (5.24 nm) NPs was determined using an X-ray Diffractometer (XRD). The developed CS/CeO₂ NCs demonstrated excellent antibacterial and antifungal efficacy against foodborne pathogens such as Escherichia coli, Staphylococcus aureus, and Botrytis cinerea with zone of inhibition of 13.5 ± 0.2 and 11.7 ± 0.2 mm, respectively. The results elucidated the potential of biosynthesized CS/CeO₂ NCs could be utilized as potent antimicrobial agents in the food and agriculture industries.

Cerium oxide nanozymes confer a cytoprotective and bio-friendly surface micro-environment to methacrylate based oro-facial prostheses

Poly-(methyl methacrylate) (PMMA) is the preferred biomaterial for orofacial prostheses used for the rehabilitation of naso-palatal defects. However, conventional PMMA has limitations determined by the complexity of the local microbiota and the friability of oral mucosa adjacent to these defects. Our purpose was to develop a new type of PMMA, i-PMMA, with good biocompatibility and better biological effects such as higher resistance to microbial adhesion of multiple species and enhanced antioxidant effect. The addition of cerium oxide nanoparticles to PMMA using a mesoporous nano-silica carrier and polybetaine conditioning, resulted in an increased release of cerium ions and enzyme mimetic activity, without tangible loss of mechanical properties. Ex vivo experiments confirmed these observations. In stressed human gingival fibroblasts, i-PMMA reduced the levels of reactive oxygen species and increased the expression of homeostasis-related proteins (PPARg, ATG5, LCI/III). Furthermore, i-PMMA increased the levels of expression of superoxide dismutase and mitogen-activated protein kinases (ERK and Akt), and cellular migration. Lastly, we demonstrated the biosafety of i-PMMA using two in vivo models: skin sensitization assay and oral mucosa irritation test, respectively. Therefore, i-PMMA offers a cytoprotective interface that prevents microbial adhesion and attenuates oxidative stress, thus supporting physiological recovery of the oral mucosa.

Insights from a Bibliometrics-Based Analysis of Publishing and Research Trends on Cerium Oxide from 1990 to 2020

The purpose of this study is to evaluate the literature for research trends on cerium oxide from 1990 to 2020 and identify gaps in knowledge in the emerging application(s) of CeONP. Bibliometric methods were used to identify themes in database searches from PubMed, Scopus and Web of Science Core Collection using SWIFT-Review, VOSviewer and SciMAT software programs. A systematic review was completed on published cerium oxide literature extracted from the Scopus database (n = 17,115), identifying themes relevant to its industrial, environmental and biomedical applications. A total of 172 publications were included in the systematic analysis and categorized into four time periods with research themes identified; "doping additives" (n = 5, 1990-1997), "catalysts" (n = 32, 1998-2005), "reactive oxygen species" (n = 66, 2006-2013) and "pathology" (n = 69, 2014-2020). China and the USA showed the highest number of citations and publications for cerium oxide research from 1990 to 2020. Longitudinal analysis showed CeONP has been extensively used for various applications due to its catalytic properties. In conclusion, this study showed the trend in research in CeONP over the past three decades with advancements in nanoparticle engineering like doping, and more recently surface modification or functionalization to further enhanced its antioxidant abilities. As a result of recent nanoparticle engineering developments, research into CeONP biological effects have highlighted its therapeutic potential for a range of human pathologies such as Alzheimer's disease. Whilst research over the past three decades show the versatility of cerium oxide in industrial and environmental applications, there are still research opportunities to investigate the potential beneficial effects of CeONP in its application(s) on human health.

Metal Oxide Nanoparticles: Review of Synthesis, Characterization and Biological Effects

In the last few years, the progress made in the field of nanotechnology has allowed researchers to develop and synthesize nanosized materials with unique physicochemical characteristics, suitable for various biomedical applications. Amongst these nanomaterials, metal oxide nanoparticles (MONPs) have gained increasing interest due to their excellent properties, which to a great extent differ from their bulk counterpart. However, despite such positive advantages, a substantial body of literature reports on their cytotoxic effects, which are directly correlated to the nanoparticles' physicochemical properties, therefore, better control over the synthetic parameters will not only lead to favorable surface characteristics but may also increase biocompatibility and consequently lower cytotoxicity. Taking into consideration the enormous biomedical potential of MONPs, the present review will discuss the most recent developments in this field referring mainly to synthesis methods, physical and chemical characterization and biological effects, including the pro-regenerative and antitumor potentials as well as antibacterial activity. Moreover, the last section of the review will tackle the pressing issue of the toxic effects of MONPs on various tissues/organs and cell lines.

Comparison of In Vitro Approaches to Assess the Antibacterial Effects of Nanomaterials

The antibacterial properties of nanomaterials (NMs) can be exploited in a range of consumer products (e.g., wound dressings, food packaging, textiles, medicines). There is also interest in the exploitation of NMs as treatments for infectious diseases to help combat antibiotic resistance. Whilst the antibacterial activity of NMs has been assessed in vitro and in vivo in numerous studies, the methodology used is very varied. Indeed, while numerous approaches are available to assess the antibacterial effect of NMs in vitro, they have not yet been systematically assessed for their suitability and sensitivity for testing NMs. It is therefore timely to consider what assays should be prioritised to screen the antibacterial properties of NMs. The majority of existing in vitro studies have focused on investigating the antibacterial effects exhibited by silver (Ag) NMs and have employed a limited range of assays. We therefore compared the antibacterial effects of copper oxide (CuO) NMs to Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and Bacillus subtilis at various concentrations (12.5-200 µg/mL) using a battery of tests (well and disc diffusion, plate counts-time-kill method, optical density measurement-OD, Alamar Blue and live/dead viability assays, and quantitative polymerase chain reaction). CuO NMs were most toxic to B. subtilis and E. coli, while P. aeruginosa was the least sensitive strain. All assays employed detected the antibacterial activity of CuO NMs; however, they varied in their sensitivity, time, cost, technical difficulty and requirement for specialized equipment. In the future, we suggest that a combination of approaches is used to provide a robust assessment of the antibacterial activity of NMs. In particular, we recommend that the time-kill and OD assays are prioritised due to their greater sensitivity. We also suggest that standard operating protocols are developed so that the antibacterial activity of NMs can be assessed using a harmonised approach.

Cerium oxide thin films: synthesis, characterization, photocatalytic activity and influence on microbial growth

The resistance of surfaces to biofouling remains a significant advantage for optical devices working in natural conditions, increasing their lifetime and reducing maintenance costs. This paper reports on the functionalities of transparent CeO₂ thin films with thicknesses between 25 and 600 nm deposited by reactive magnetron sputtering on the glass substrate. The CeO₂ photocatalytic performance exhibited an efficiency of 30% on imidacloprid degradation under 6 h of UV radiation and increased linearly with the irradiation time, suggesting a complete degradation within 48 h. The films did not alter the growth rate of the green algae Chlorella vulgaris after 72 h short-term exposure. The tested CeO₂ films proved to efficiently inhibit with high efficiency the Staphylococcus aureus biofilms and planktonic growth (reducing the counts of bacterial cells by 2 to 8 logs), demonstrating the promising potential of these materials for obtaining antimicrobial and antibiofilm surfaces, with broad applications for the biomedical, ecological and industrial fields.

Cerium-Containing Mesoporous Bioactive Glasses (MBGs)-Derived Scaffolds with Drug Delivery Capability for Potential Tissue Engineering Applications

Finding innovative solutions to improve the lives of people affected by trauma, bone disease, or aging continues to be a challenge worldwide. Tissue engineering is the most rapidly growing area in the domain of biomaterials. Cerium-containing MBG-derived biomaterials scaffolds were synthesized using polymethyl methacrylate (PMMA) as a sacrificial template. The obtained scaffolds were characterized by X-ray powder diffraction (XRPD), infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The Ce4+/Ce3+ ratio in the scaffolds was estimated. In vitro testing revealed good cytocompatibility of the investigated scaffolds in mouse fibroblast cell line (NCTC clone L929). The results obtained regarding bioactivity, antibacterial activity, and controlled drug delivery functions recommend these scaffolds as potential candidates for bone tissue engineering applications.

Physico-mechanical properties, antimicrobial activities, and anti-biofilm potencies of orthodontic adhesive containing cerium oxide nanoparticles against Streptococcus mutans

Introduction: White spot lesions around orthodontic brackets may lead to the formation of dental caries during and following fixed orthodontic treatment.

Aim: This study aimed to evaluate the physico-mechanical properties and antimicrobial potencies of orthodontic adhesive doped with cerium oxide nanoparticles (CeO2-NPs) against Streptococcus mutans.

Materials and methods: After synthesis and conformation of CeO2-NPs by transmission electron microscope (TEM), shear bond strength (SBS) and adhesive remnant index (ARI) of modified orthodontic adhesive containing different concentrations of CeO2-NPs (0, 1, 2, 5, and 10 wt%) were measured. The antimicrobial effects of modified orthodontic adhesive were evaluated by disk agar diffusion method and biofilm formation inhibition assay.

Results: The pseudo-spherical shapes of CeO2-NPs were observed in TEM micrographs. The physico-mechanical finding showed that 5 wt% CeO2-NPs showed the highest concentration of CeO2-NPs and SBS value (18.21±9.06 MPa, p&lt;0.05) simultaneously with no significant differences in ARI compared with the control group (p&gt;0.05). There was a significant reduction in cell viability of S. mutans with increasing CeO2-NPs concentration. The 3.1 Log10 and 4.6 Log10 reductions were observed in the count of treated S. mutans with 5 and 10 wt% CeO2-NPs, respectively (p&lt;0.05).

Conclusions: Overall, an orthodontic adhesive containing 5 wt% CeO2-NPs had antimicrobial properties against S. mutans without adverse effects on SBS and ARI.

The Use of Cerium Compounds as Antimicrobials for Biomedical Applications

Cerium and its derivatives have been used as remedies for wounds since the early 20th century. Cerium nitrate has attracted most attention in the treatment of deep burns, followed later by reports of its antimicrobial properties. Its ability to mimic and replace calcium is presumed to be a major mechanism of its beneficial action. However, despite some encouraging results, the overall data are somewhat confusing with seemingly the same compounds yielding opposing results. Despite this, cerium nitrate is currently used in wound treatment in combination with silver sulfadiazine as Flammacérium. Cerium oxide, especially in nanoparticle form (Nanoceria), has lately captured much interest due to its antibacterial properties mediated via oxidative stress, leading to an increase of published reports. The properties of Nanoceria depend on the synthesis method, their shape and size. Recently, the green synthesis route has gained a lot of interest as an alternative environmentally friendly method, resulting in production of effective antimicrobial and antifungal nanoparticles. Unfortunately, as is the case with antibiotics, emerging bacterial resistance against cerium-derived nanoparticles is a growing concern, especially in the case of bacterial biofilm. However, diverse strategies resulting from better understanding of the biology of cerium are promising. The aim of this paper is to present the progress to date in the use of cerium compounds as antimicrobials in clinical applications (in particular wound healing) and to provide an overview of the mechanisms of action of cerium at both the cellular and molecular level.

Synchrotron XRF Analysis Identifies Cerium Accumulation Colocalized with Pharyngeal Deformities in CeO2 NP-Exposed Caenorhabditis elegans

A combination of synchrotron radiation-based elemental imaging, in vivo redox status analysis, histology, and toxic responses was used to investigate the uptake, biodistribution, and adverse effects of Ce nanoparticles (CeO₂ NP; 10 nm; 0.5-34.96 mg Ce L^-1) or Ce(NO₃)₃ (2.3-26 mg Ce L^-1) in Caenorhabditis elegans. Elemental mapping of the exposed nematodes revealed Ce uptake in the alimentary canal prior to depuration. Retention of CeO₂ NPs was low compared to that of Ce(NO₃)₃ in depurated individuals. X-ray fluorescence (XRF) mapping showed that Ce translocation was confined to the pharyngeal valve and foregut. Ce(NO₃)₃ exposure significantly decreased growth, fertility, and reproduction, caused slightly reduced fecundity. XRF mapping and histological analysis revealed severe tissue deformities colocalized with retained Ce surrounding the pharyngeal valve. Both forms of Ce activated the sod-1 antioxidant defense, particularly in the pharynx, whereas no significant effects on the cellular redox balance were identified. The CeO₂ NP-induced deformities did not appear to impair the pharyngeal function or feeding ability as growth effects were restricted to Ce(NO₃)₃ exposure. The results demonstrate the utility of integrated submicron-resolution SR-based XRF elemental mapping of tissue-specific distribution and adverse effect analysis to obtain robust toxicological evaluations of metal-containing contaminants.

Development of Novel Antimicrobial Dental Composite Resin with Nano Cerium Oxide Fillers

Objectives. To assess the antibacterial efficacy of experimental dental composite resin with cerium oxide nanoparticles as fillers. Methods. The cerium oxide nanoparticles were prepared by the coprecipitation procedure. Synthesized 3wt% CeO2 nanoparticles were added to the composite resin as antibacterial filler. Experimental composite resin was manually prepared by adding ingredients. The resin matrix consisted of two mixed monomers, bisphenol A-glycidyl methacrylate and triethylene glycol dimethacrylate, diketone as the photo initiator, and N, N-dimethylaminoethyl methacrylate as a coinitiator. The antibacterial efficacy against Streptococcus mutans, Streptococcus mitis, Streptococcus aureus, and Lactobacillus spp. bacterial strains was tested using the microdilution method keeping commercially available 3M Filtek Z250 restorative composite as control. Results. The experimental dental composite demonstrated 99.503% efficacy against Streptococcus mutans, 99.441% efficacy against Streptococcus mitis, 99.416% efficacy against Streptococcus aureus, and 99.233% efficacy against Lactobacillus spp. Conclusion. Integrating cerium oxide nanoparticles as fillers into dental composite resin can be promising in terms of antibacterial activity, provided furthermore study has to be conducted to examine other properties. Clinical Significance. Previous studies attempted adding CeO2 nanoparticles into acrylic resins that showed improvement in mechanical properties, but literature is nil on the dental composite resin and cerium oxide nanoparticles. This study demonstrates the development of an experimental antibacterial dental composite resin that can resolve most of the problems related to secondary caries around dental composite restorations.

Influence of cerium oxide nanoparticles on dairy effluent nitrate and phosphate bioremediation

This study investigated, for the first time, the role of cerium oxide nanoparticles (CeO₂ NPs) on dairy effluent nitrate and phosphate bioremediation using different inoculum sources. Two inoculum sources (wastewater and sludge) were obtained from the dairy wastewater treatment plant unit. A culture was prepared to be tested in the treatment of nitrate and phosphate effluent, and the role of CeO₂ NPs was checked to be completely efficient after 5 days of incubation. The reduction efficiency of nitrate using sludge as inoculum source was improved up to 89.01% and 68.12% for phosphate compared to control. In the case of using wastewater as an inoculum source, the nitrate reduction was improved up to 83.30% and 87.75% for phosphate compared to control. The bacterial richness showed a significant variance (higher richness) between control and other samples. The optimal concentration of CeO₂ NPs for inoculum richness and nitrate and phosphate reduction was (sludge: 1 × 10^-10 ppm) and (wastewater: 1 × 10^-12 ppm). The results revealed that CeO₂ NPs could enhance the microbial growth of different inoculum sources that have a key role in dairy effluent nitrate and phosphate bioremediation.

A review and revisit of nanoparticles for antimicrobial drug delivery

Antimicrobials are widely used to treat bacteria, viruses, fungi, and protozoa. Therefore, research and development of newer types of antimicrobials are important. Antimicrobial resistance has emerged as a major challenge to the healthcare system, although various alternative antimicrobials have been proposed. However, none of these show consistent and comparable efficacy to antimicrobials in clinical trials. More recently, nanoparticles have emerged as a potential solution to antimicrobial agents to overcome antimicrobial resistance. This article revisits and updates applications of various types of nanoparticles for the delivery of antimicrobial agents and their characterization. Though nanoparticle technology has some limitations, it provides an innovative approach to pharmaceutical technology. Furthermore, nanoparticles offer a variety of advantages, such as enhancement of solubility and permeation, leading to better efficacy. In this article, approaches commonly employed to improve antimicrobial therapy are discussed. These approaches have advantages and applications and provide a broader opportunity for pharmaceutical scientists to choose the proper method per the desired outcome.

Application of a novel nanocomposite containing micro-nutrient solubilizing bacterial strains and CeO2 nanocomposite as bio-fertilizer

Chemical fertilizers are used in modern agricultural practice to increase plant output. They possess anthropogenic compounds which are hazardous, result in poor soil quality, poor crop nutrition and pollutes the water table. Currently, food crops that lack in micro-nutrients (Zn, silicates and Se) can be enriched with micronutrients by use of fertilizers. Eco-friendly bio-fertilizers have been proved to provide a known population of microorganisms that create a mutual benefit to the plants & the rhizosphere soil. Nanomaterials are often used in plant fertilizer formulation, allowing for controlled release and targeted delivery of beneficial nanoscale components, as well as to boost plant production and reduce environmental pollutants. In the present study we identified a multipotent micronutrient solubilizing bacterium (MSB) - Pseudomonas gessardi and Pseudomonas azotoformans as a bio-fertiliser. Comparative study of the formulated MSB, with nanocomposite prepared with the soya chunks as natural carrier material and chemically synthesized cerium oxide was performed on the growth of fenugreek for its effectiveness. The SEM images of nanocomposite showed the non-uniform distribution of CeO₂ in bio-inoculant with an average size of 25.24 nm. The current study deals with increase in the shoot and root length of the fenugreek plant with only 75 ppm of CeO₂ in nanocomposite, thereby preventing bioaccumulation of Ce in soil. This work gives a potential use of CeO2 nanocomposite with MSB bio-inoculants which could be applied to soil deficient with the micronutrients that can enhance the crop yield.

Antimicrobial Mechanisms of Biomaterials: From Macro to Nano

Overcoming the global concern of antibiotic resistance is one of the biggest challenge faced by scientists today and the key to tackle this issue of emerging infectious diseases is the...

Nanotechnology in combating biofilm: A smart and promising therapeutic strategy

Since the birth of civilization, people have recognized that infectious microbes cause serious and often fatal diseases in humans. One of the most dangerous characteristics of microorganisms is their propensity to form biofilms. It is linked to the development of long-lasting infections and more severe illness. An obstacle to eliminating such intricate structures is their resistance to the drugs now utilized in clinical practice (biofilms). Finding new compounds with anti-biofilm effect is, thus, essential. Infections caused by bacterial biofilms are something that nanotechnology has lately shown promise in treating. More and more studies are being conducted to determine whether nanoparticles (NPs) are useful in the fight against bacterial infections. While there have been a small number of clinical trials, there have been several in vitro outcomes examining the effects of antimicrobial NPs. Nanotechnology provides secure delivery platforms for targeted treatments to combat the wide range of microbial infections caused by biofilms. The increase in pharmaceuticals' bioactive potential is one of the many ways in which nanotechnology has been applied to drug delivery. The current research details the utilization of several nanoparticles in the targeted medication delivery strategy for managing microbial biofilms, including metal and metal oxide nanoparticles, liposomes, micro-, and nanoemulsions, solid lipid nanoparticles, and polymeric nanoparticles. Our understanding of how these nanosystems aid in the fight against biofilms has been expanded through their use.

Antibacterial effect of cerium oxide nanoparticle against Pseudomonas aeruginosa

BACKGROUND

Antibiotics have been widely used for the treatment of bacterial infections for decades. However, the rapid emergence of antibiotic-resistant bacteria has created many problems with a heavy burden for the medical community. Therefore, the use of nanoparticles as an alternative for antibacterial activity has been explored. In this context, metal nanoparticles have demonstrated broad-spectrum antimicrobial activity. This study investigated the antimicrobial activity of naked cerium oxide nanoparticles dispersed in aqueous solution (CNPs) and surface-stabilized using Pseudomonas aeruginosa as a bacterial model.

METHODS

Gelatin-polycaprolactone nanofibers containing CNPs (Scaffold@CNPs) were synthesized, and their effect on P. aeruginosa was investigated. The minimum inhibitory and bactericidal concentrations of the nanoparticls were determined in an ATCC reference strain and a clinical isolate strain. To determine whether the exposure to the nanocomposites might change the expression of antibiotic resistance, the expression of the genes shv, kpc, and imp was also investigated. Moreover, the cytotoxicity of the CNPs was assessed on fibroblast using flow cytometry.

RESULTS

Minimum bactericidal concentrations for the ATCC and the clinical isolate of 50 µg/mL and 200 µg/mL were measured, respectively, when the CNPs were used. In the case of the Scaffold@CNPs, the bactericidal effect was 50 µg/mL and 100 µg/mL for the ATCC and clinical isolate, respectively. Interestingly, the exposure to the Scaffold@CNPs significantly decreased the expression of the genes shv, kpc, and imp.

CONCLUSIONS

A concentration of CNPs and scaffold@CNPs higher than 50 μg/mL can be used to inhibit the growth of P. aeruginosa. The fact that the scaffold@CNPs significantly reduced the expression of resistance genes, it has the potential to be used for medical applications such as wound dressings.

Interrelationships between the structural, spectroscopic, and antibacterial properties of nanoscale (< 50 nm) cerium oxides

Bone healing is a complex process, and if not managed successfully, it can lead to non-union, metal-work failure, bacterial infections, physical and psychological patient impairment. Due to the growing urgency to minimise antibiotic dependency, alternative treatment strategies, including the use of nanoparticles, have attracted significant attention. In the present study, cerium oxide nanoparticles (Ce4+, Ce3+) have been selected due to their unique antibacterial redox capability. We found the processing routes affected the agglomeration tendency, particle size distribution, antibacterial potential, and ratio of Ce3+:Ce4+ valence states of the cerium oxide nanoparticles. The antibacterial efficacy of the nanoparticles in the concentration range of 50-200 µg/ml is demonstrated against Escherichia coli, Staphylococcus epidermis, and Pseudomonas aeruginosa by determining the half-maximal inhibitory concentration (IC50). Cerium oxide nanoparticles containing a more significant amount of Ce3+ ions, i.e., FRNP, exhibited 8.5 ± 1.2%, 10.5 ± 4.4%, and 13.8 ± 5.8% increased antibacterial efficacy compared with nanoparticles consisting mainly of Ce4+ ions, i.e., nanoparticles calcined at 815 °C.

Enthralling the impact of engineered nanoparticles on soil microbiome: A concentric approach towards environmental risks and cogitation

Nanotechnology is an avant-garde field of scientific research that revolutionizes technological advancements in the present world. It is a cutting-edge scientific approach that has undoubtedly a plethora of functions in controlling environmental pollutants for the welfare of the ecosystem. However, their unprecedented utilization and hysterical release led to a huge threat to the soil microbiome. Nanoparticles(NPs) hamper physicochemical properties of soil along with microbial metabolic activities within rhizospheric soils.Here in this review shed light on concentric aspects of NP-biosynthesis, types, toxicity mechanisms, accumulation within the ecosystem. However, the accrual of tiny NPs into the soil system has dramatically influenced rhizospheric activities in terms of soil properties and biogeochemical cycles. We have focussed on mechanistic pathways engrossed by microbes to deal with NPs.Also, we have elaborated the fate and behavior of NPs within soils. Besides, a piece of very scarce information on NPs-toxicity towards environment and rhizosphere communities is available. Therefore, the present review highlights ecological perspectives of nanotechnology and solutions to such implications. We have comprehend certain strategies such as avant-garde engineering methods, sustainable procedures for NP synthesis along with vatious regulatory actions to manage NP within environment. Moreover, we have devised risk management sustainable and novel strategies to utilize it in a rationalized and integrated manner. With this background, we can develop a comprehensive plan about NPs with novel insights to understand the resistance and toxicity mechanisms of NPs towards microbes. Henceforth, the orientation towards these issues would enhance the understanding of researchers for proper recommendation and promotion of nanotechnology in an optimized and sustainable manner.