Removal of odors from Swine wastewater by using microbial fuel cells

Optimization of microbial fuel cell performance application to high sulfide industrial wastewater treatment by modulating microbial function

Microbial fuel cells (MFCs) are innovative eco-friendly technologies that advance a circular economy by enabling the conversion of both organic and inorganic substances in wastewater to electricity. While conceptually promising, there are lingering questions regarding the performance and stability of MFCs in real industrial settings. To address this research gap, we investigated the influence of specific operational settings, regarding the hydraulic retention time (HRT) and organic loading rate (OLR) on the performance of MFCs used for treating sulfide-rich wastewater from a canned pineapple factory. Experiments were performed at varying hydraulic retention times (2 days and 4 days) during both low and high seasonal production. Through optimization, we achieved a current density generation of 47±15 mA/m2, a COD removal efficiency of 91±9%, and a sulfide removal efficiency of 86±10%. Microbiome analysis revealed improved MFC performance when there was a substantial presence of electrogenic bacteria, sulfide-oxidizing bacteria, and methanotrophs, alongside a reduced abundance of sulfate-reducing bacteria and methanogens. In conclusion, we recommend the following operational guidelines for applying MFCs in industrial wastewater treatment: (i) Careful selection of the microbial inoculum, as this step significantly influences the composition of the MFC microbial community and its overall performance. (ii) Initiating MFC operation with an appropriate OLR is essential. This helps in establishing an effective and adaptable microbial community within the MFCs, which can be beneficial when facing variations in OLR due to seasonal production changes. (iii) Identifying and maintaining MFC-supporting microbes, including those identified in this study, should be a priority. Keeping these microbes as an integral part of the system's microbial composition throughout the operation enhances and stabilizes MFC performance.

Harnessing fungal bio-electricity: a promising path to a cleaner environment

Integrating fungi into fuel cell systems presents a promising opportunity to address environmental pollution while simultaneously generating energy. This review explores the innovative concept of constructing wetlands as fuel cells for pollutant degradation, offering a practical and eco-friendly solution to pollution challenges. Fungi possess unique capabilities in producing power, fuel, and electricity through metabolic processes, drawing significant interest for applications in remediation and degradation. Limited data exist on fungi's ability to generate electricity during catalytic reactions involving various enzymes, especially while remediating pollutants. Certain species, such as Trametes versicolor, Ganoderma lucidum, Galactomyces reessii, Aspergillus spp., Kluyveromyce smarxianus, and Hansenula anomala, have been reported to generate electricity at 1200 mW/m3, 207 mW/m2, 1,163 mW/m3, 438 mW/m3, 850,000 mW/m3, and 2,900 mW/m3, respectively. Despite the eco-friendly potential compared to conventional methods, fungi's role remains largely unexplored. This review delves into fungi's exceptional potential as fuel cell catalysts, serving as anodic or cathodic agents to mitigate land, air, and water pollutants while simultaneously producing fuel and power. Applications cover a wide range of tasks, and the innovative concept of wetlands designed as fuel cells for pollutant degradation is discussed. Cost-effectiveness may vary depending on specific contexts and applications. Fungal fuel cells (FFCs) offer a versatile and innovative solution to global challenges, addressing the increasing demand for alternative bioenergy production amid population growth and expanding industrial activities. The mechanistic approach of fungal enzymes via microbial combinations and electrochemical fungal systems facilitates the oxidation of organic substrates, oxygen reduction, and ion exchange membrane orchestration of essential reactions. Fungal laccase plays a crucial role in pollutant removal and monitoring environmental contaminants. Fungal consortiums show remarkable potential in fine-tuning FFC performance, impacting both power generation and pollutant degradation. Beyond energy generation, fungal cells effectively remove pollutants. Overall, FFCs present a promising avenue to address energy needs and mitigate pollutants simultaneously.

Organic Waste Substrates for Bioenergy Production via Microbial Fuel Cells: A Key Point Review

High-energy consumption globally has raised questions about the low environmentally friendly and high-cost processes used until now for energy production. Microbial fuel cells (MFCs) may support alternative more economically and environmentally favorable ways of bioenergy production based on their advantage of using waste. MFCs work as bio-electrochemical devices that consume organic substrates in order for the electrogenic bacteria and/or enzyme cultures to produce electricity and simultaneously lower the environmental hazardous value of waste such as COD. The utilization of organic waste as fuels in MFCs has opened a new research path for testing a variety of by-products from several industry sectors. This review presents several organic waste substrates that can be employed as fuels in MFCs for bioenergy generation and the effect of their usage on power density, COD (chemical oxygen demand) removal, and Coulombic efficiency enhancement. Moreover, a demonstration and comparison of the different types of mixed waste regarding their efficiency for energy generation via MFCs are presented. Future perspectives for manufacturing and cost analysis plans can support scale-up processes fulfilling waste-treatment efficiency and energy-output densities.

Determination of Odor Air Quality Index (OAQII) Using Gas Sensor Matrix

This article presents a new way to determine odor nuisance based on the proposed odor air quality index (OAQII), using an instrumental method. This indicator relates the most important odor features, such as intensity, hedonic tone and odor concentration. The research was conducted at the compost screening yard of the municipal treatment plant in Central Poland, on which a self-constructed gas sensor array was placed. It consisted of five commercially available gas sensors: three metal oxide semiconductor (MOS) chemical sensors and two electrochemical ones. To calibrate and validate the matrix, odor concentrations were determined within the composting yard using the field olfactometry technique. Five mathematical models (e.g., multiple linear regression and principal component regression) were used as calibration methods. Two methods were used to extract signals from the matrix: maximum signal values from individual sensors and the logarithm of the ratio of the maximum signal to the sensor baseline. The developed models were used to determine the predicted odor concentrations. The selection of the optimal model was based on the compatibility with olfactometric measurements, taking the mean square error as a criterion and their accordance with the proposed OAQII. For the first method of extracting signals from the matrix, the best model was characterized by RMSE equal to 8.092 and consistency in indices at the level of 0.85. In the case of the logarithmic approach, these values were 4.220 and 0.98, respectively. The obtained results allow to conclude that gas sensor arrays can be successfully used for air quality monitoring; however, the key issues are data processing and the selection of an appropriate mathematical model.

Fundamental understanding of microbial fuel cell technology: Recent development and challenges

The research on microbial fuel cells (MFCs) is rising tremendously but its commercialization is restricted by several microbiological, material, and economic constraints. Hence, a systematic assessment of the research articles published previously focusing on potential upcoming directions in this field is necessary. A detailed multi-perspective analysis of various techniques for enhancing the efficiency of MFC in terms of electric power production is presented in this paper. A brief discussion on the central aspects of different issues are preceded by an extensive analysis of the strategies that can be introduced to optimize power generation and reduce energy losses. Various applications of MFCs in a broad spectrum ranging from biomedical to underwater monitoring rather than electricity production and wastewater treatment are also presented followed by relevant possible case studies. Mathematical modeling is used to understand the concepts that cannot be understood experimentally. These methods relate electrode geometries to microbiological reactions occurring inside the MFC chamber, which explains the system's behavior and can be improved. Finally, directions for future research in the field of MFCs have been suggested. This article can be beneficial for engineers and researchers concerned about the challenges faced in the application of MFC.

Dark fermentation: Production and utilization of volatile fatty acid from different wastes- A review

Volatile fatty acids (VFAs) are the building blocks of the chemical industry, and they are the primary contributors to the planet's organic carbon cycle. VFA production from fossil fuels (mostly petroleum) is unsustainable, pollutes the environment, and generates greenhouse gases. As a result of these issues, there is a pressing need to develop alternate sources for the long-term generation of VFAs via anaerobic digestion. The accessible feedstocks for its sustainable production, as well as the influencing parameters, are discussed in this review. The use of VFAs as a raw material to make a variety of consumer products is reviewed in order to find a solution. It also bridges the gap between traditional and advanced VFA production and utilization methods from a variety of solid and liquid waste sources for economical stability.

Bioenergy from dairy manure: technologies, challenges and opportunities

Dairy manure (DM) is a kind of cheap cellulosic biomass resource which includes lignocellulose and mineral nutrients. Random stacks not only leads damage to the environment, but also results in waste of natural resources. The traditional ways to use DM include returning it to the soil or acting as a fertilizer, which could reduce environmental pollution to some extent. However, the resource utilization rate is not high and socio-economic performance is not utilized. To expand the application of DM, more and more attention has been paid to explore its potential as bioenergy or bio-chemicals production. This article presented a comprehensive review of different types of bioenergy production from DM and provided a general overview for bioenergy production. Importantly, this paper discussed potentials of DM as candidate feedstocks not only for biogas, bioethanol, biohydrogen, microbial fuel cell, lactic acid, and fumaric acid production by microbial technology, but also for bio-oil and biochar production through apyrolysis process. Additionally, the use of manure for replacing freshwater or nutrients for algae cultivation and cellulase production were also discussed. Overall, DM could be a novel suitable material for future biorefinery. Importantly, considerable efforts and further extensive research on overcoming technical bottlenecks like pretreatment, the effective release of fermentable sugars, the absence of robust organisms for fermentation, energy balance, and life cycle assessment should be needed to develop a comprehensive biorefinery model.

Agricultural Waste and Wastewater as Feedstock for Bioelectricity Generation Using Microbial Fuel Cells: Recent Advances

In recent years, there has been a significant accumulation of waste in the environment, and it is expected that this accumulation may increase in the years to come. Waste disposal has massive effects on the environment and can cause serious environmental problems. Thus, the development of a waste treatment system is of major importance. Agro-industrial wastewater and waste residues are mainly rich in organic substances, lignocellulose, hemicellulose, lignin, and they have a relatively high amount of energy. As a result, an effective agro-waste treatment system has several benefits, including energy recovery and waste stabilization. To reduce the impact of the consumption of fossil energy sources on our planet, the exploitation of renewable sources has been relaunched. All over the world, efforts have been made to recover energy from agricultural waste, considering global energy security as the final goal. To attain this objective, several technologies and recovery methods have been developed in recent years. The microbial fuel cell (MFC) is one of them. This review describes the power generation using various types of agro-industrial wastewaters and agricultural residues utilizing MFC. It also highlights the techno-economics and lifecycle assessment of MFC, its commercialization, along with challenges.

Microbial fuel cell system: a promising technology for pollutant removal and environmental remediation

The microbial fuel cell (MFC) system is a promising environmental remediation technology due to its simple compact design, low cost, and renewable energy producing. MFCs can convert chemical energy from waste matters to electrical energy, which provides a sustainable and environmentally friendly solution for pollutant degradations. In this review, we attempt to gather research progress of MFC technology in pollutant removal and environmental remediation. The main configurations and pollutant removal mechanism by MFCs are introduced. The research progress of MFC systems in pollutant removal and environmental remediation, including wastewater treatment, soil remediation, natural water and groundwater remediation, sludge and solid waste treatment, and greenhouse gas emission control, as well as the application of MFCs in environmental monitoring have been reviewed. Subsequently, the application of MFCs in environmental monitoring and the combination of MFCs with other technologies are described. Finally, the current limitations and potential future research has been demonstrated in this review.

Continuous flow, large-scale, microbial fuel cell system for the sustained treatment of swine waste

Microbial fuel cells (MFCs) have long held the promise of being a cost-effective technology for the energy-neutral treatment of wastewater. However, successful pilot-scale demonstrations for this technology are still limited to very few. Here, we present a large-scale MFC system, composed of 12 MFCs with a total volume of 110 L, successfully treating swine wastewater at a small educational farm. The system was operated for over 200 days in continuous mode with hydraulic residence time of 4 hr. Very stable electrochemical and waste treatment performance was observed with up to 65% of chemical oxygen demand (COD) removed and a maximum treatment rate of 5.0 kg COD/m³ .day. Robust microbial enrichment was performed and adapted to metabolize and transform a diversity of compounds present. The Net Energy Recovery (NER = 0.11 kWhr/kg COD) is not only competitive with conventional cogeneration processes, but is in fact sufficient to sustain the operational energy requirements of the system. PRACTITIONER POINTS: This study demonstrates the design and operation of a large-scale microbial fuel cells (MFC) system for continuous treatment of swine wastewater. The system achieved a high chemical oxygen demand removal rate within a short hydraulic residence time. This study moves one-step closer to applying MFC technology for real wastewater treatment.

Scaling up Microbial Fuel Cells for Treating Swine Wastewater

Conventional aerobic treatment of swine wastewater, which generally contains 4500–8200 mg L−1 of organic matter, is energy-consuming. The aim of this study was to assess the application of scaled-up microbial fuel cells (MFCs) with different capacities (i.e., 1.5 L, 12 L, and 100 L) for removing organic matter from swine wastewater. The MFCs were single-chambered, consisting of an anode of microbially reduced graphene oxide (rGO) and an air-cathode of platinum-coated carbon cloth. The MFCs were polarized via an external resistance of 3–10 Ω for 40 days for the 1.5 L-MFC and 120 days for the 12L- and 100 L-MFC. The MFCs were operated in continuous flow mode (hydraulic retention time: 3–5 days). The 100 L-MFC achieved an average chemical oxygen demand (COD) removal efficiency of 52%, which corresponded to a COD removal rate of 530 mg L−1 d−1. Moreover, the 100 L-MFC showed an average and maximum electricity generation of 0.6 and 2.2 Wh m−3, respectively. Our findings suggest that MFCs can effectively be used for swine wastewater treatment coupled with the simultaneous generation of electricity.

Electron donation characteristics and interplays of major volatile fatty acids from anaerobically fermented organic matters in bioelectrochemical systems

Anaerobic fermentation liquid of waste organic matters (WOMs) is rich in volatile fatty acids (VFAs), which can be treated with bioelectrochemical systems for both electrical energy recovery and organics removal. In this work, four major VFAs in the fermented WOMs supernatant were selected to examine their electron donation characteristics for power output and their complicated interplays in microbial fuel cells (MFCs). Results indicated a priority sequence of acetate, propionate, n-butyrate and i-valerate when served as the sole electron donor for electricity generation. The MFC solely fed with acetate showed the highest coulombic efficiency and power density, and the longest period for electricity production. When two of the VFAs were added with equal proportion, both acids contributed positively to electricity generation, while the selective or competitive use of substrates by diverse microorganisms behaved as an antagonism effect to prolong the degradation time of each VFA. When acetate and propionate, the preferable substrates for electricity generation, were mixed in various proportions, their large concentration difference led to improved electrical performance but decreased organic removal rate.

Electrodes boost microbial metabolism to mineralize antibiotics in manure

Livestock manures are potential sources of antibiotics in the environment. Sulfamethazine (SMZ), frequently used in veterinary medicine, can enter the environment by using manure as soil fertilizer due to its incomplete absorption in the animal gut and its unmetabolized excretion. The objective of this study was to evaluate the mineralization of ¹⁴C-labelled SMZ in manure under a new redox scenario provided by microbial electrochemical reactors, termed microbial electroremediating cells (MERC). These devices aim to overcome the electron acceptor limitation in bacterial oxidative metabolism by means of using electrodes to enhance the biodegradation of pollutants in the environment. Our results revealed that the total degradation of ¹⁴C-SMZ reached 43.5% in short term batch laboratory scale experiments under reducing conditions (-400 mV vs. Ag/AgCl). Actually, SMZ mineralization was enhanced up to 10-fold in the early stages (after 2 weeks) in comparison with an electrode-free natural attenuation assay. Moreover, mineralization showed a dependence on electrode potential, with negligible results for conditions set to +400 mV vs Ag/AgCl. The impact of merging electrodes and microorganisms for manure bioremediation suggests a promising future for this emerging technology to treat polluted livestock wastes and prevent soil and groundwater pollution.

Challenges in the application of microbial fuel cells to wastewater treatment and energy production: A mini review

Wastewater is now considered to be a vital reusable source of water reuse and saving energy. However, current wastewater has multiple limitations such as high energy costs, large quantities of residuals being generated and lacking in potential resources. Recently, great attention has been paid to microbial fuel cells (MFCs) due to their mild operating conditions where a variety of biodegradable substrates can serve as fuel. MFCs can be used in wastewater treatment facilities to break down organic matter, and they have also been analysed for application as a biosensor such as a sensor for biological oxygen which demands monitoring. MFCs represent an innovation technology solution that is simple and rapid. Despite the advantages of this technology, there are still practical barriers to consider including low electricity production, current instability, high internal resistance and costly materials used. Thus, many problems must be overcome and doing this requires a more detailed analysis of energy production, consumption, and application. Currently, real-world applications of MFCs are limited due to their low power density level of only several thousand mW/m². Efforts are being made to improve the performance and reduce the construction and operating costs of MFCs. This paper explores several aspects of MFCs such as anode, cathode and membrane, and in an effort to overcome the practical challenges of this system.

Bioremediation of steel plant wastewater and enhanced electricity generation in microbial desalination cell

Microbial desalination cell (MDC) is a propitious technology towards water desalination by utilizing wastewater as an energy source. In this study, a multi-chambered MDC was used to bioremediate steel plant wastewater using the same wastewater as a fuel for anodic bacteria. A pure culture of Pseudomonas putida MTCC 1194 was isolated and inoculated to remove toxic phenol. Three different inoculum conditions, namely P. putida (INC-A), a mixture of P. putida and activated sludge (INC-B), and activated sludge alone (INC-C) were employed in an anodic chamber to mainly compare the electricity generation and phenol degradation in MDCs. The study revealed the maximum phenol removal of 82 ± 2.4%, total dissolved solids (TDS) removal of 68 ± 1.5%, and power generation of 10.2 mW/m² using INC-B. The synergistic interactions between microorganisms, can enhance the toxic phenol degradation and also electricity generation in MDC for onsite wastewater application.

Comparative Metagenomic Analysis of Electrogenic Microbial Communities in Differentially Inoculated Swine Wastewater-Fed Microbial Fuel Cells

Bioelectrochemical systems such as microbial fuel cells (MFCs) are promising new technologies for efficient removal of organic compounds from industrial wastewaters, including that generated from swine farming. We inoculated two pairs of laboratory-scale MFCs with sludge granules from a beer wastewater-treating anaerobic digester (IGBS) or from sludge taken from the bottom of a tank receiving swine wastewater (SS). The SS-inoculated MFC outperformed the IGBS-inoculated MFC with regard to COD and VFA removal and electricity production. Using a metagenomic approach, we describe the microbial diversity of the MFC planktonic and anodic communities derived from the different inocula. Proteobacteria (mostly Deltaproteobacteria) became the predominant phylum in both MFC anodic communities with amplification of the electrogenic genus Geobacter being the most pronounced. Eight dominant and three minor species of Geobacter were found in both MFC anodic communities. The anodic communities of the SS-inoculated MFCs had a higher proportion of Clostridium and Bacteroides relative to those of the IGBS-inoculated MFCs, which were enriched with Pelobacter. The archaeal populations of the SS- and IGBS-inoculated MFCs were dominated by Methanosarcina barkeri and Methanothermobacter thermautotrophicus, respectively. Our results show a long-term influence of inoculum type on the performance and microbial community composition of swine wastewater-treating MFCs.

Simultaneous Generation of Bioelectricity and Treatment of Swine Wastewater in a Microbial Fuel Cell

This study aimed at the simultaneous treatment of wastewater obtained from swine and generation of bioenergy in form of electricity from the energy stored in the organic component of the wastewater. The Open circuit voltage, current, power density and microbiological and physicochemical parameters were monitored. An initial Open circuit voltage of 516mV, Current of 0.29mA, and Power density of 32.74mW/m2were recorded, which increased to give maximum Open Circuit Voltages of 836mV, Current of 0.49mA, and Power density of 88.45mW/m2. The results revealed that The Chemical Oxygen Demand (COD), Biochemical Oxygen Demand (BOD), Organic carbon, Total Soluble solids (TSS), Ammonia, Ammonium and Ammonium-Nitrogen all showed percentage decrease of 85.92%, 51.74%, 78.16%, 98.87%, 55.87%, 55.79% and 55.90% respectively while parameters such as Total Dissolved Solids (TDS), Nitrate, Nitrate-Nitrogen, Phosphates, Phosphorus and Orthophosphates however increased after treatment to give a percentage increase of -273.60%, -131.65%, -134.85%, -168.77%, -159.26%, and -157.03% respectively. Bacteria isolates identified at the biofilms on the anode wereCorynebacteriumspecie, Bacillusspecie, Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosaandStreptococcus faecalis. The results from this study further exacerbate the Bioelectricity production as well as wastewater treatment potentials of the Microbial Fuel Cell technology.

Electricity generation and nutrients removal from high-strength liquid manure by air-cathode microbial fuel cells

Air-cathode microbial fuel cells (MFCs) are widely tested to recover electrical energy from waste streams containing organic matter. When high-strength wastewater, such as liquid animal manure, is used as a medium, inhibition on anode and cathode catalysts potentially impairs the effectiveness of MFC performance in power generation and pollutant removal. This study evaluated possible inhibitive effects of liquid swine manure components on MFC power generation, improved liquid manure-fed MFCs performance by pretreatment (dilution and selective adsorption), and modeled the kinetics of organic matter and nutrients removal kinetics. Parameters monitored included pH, conductivity, chemical oxygen demand (COD), volatile fatty acids (VFAs), total ammoniacal nitrogen (TAN), nitrite, nitrate, and phosphate concentrations. The removals of VFA and TAN were efficient, indicated by the short half-life times of 4.99 and 7.84 d, respectively. The mechanism for phosphate decrease was principally the salt precipitation on cathode, but the removal was incomplete after 42-d operation. MFC with an external resistor of 2.2 kΩ and fed with swine wastewater generated relatively small power (28.2 μW), energy efficiency (0.37%) and Coulombic efficiency (1.5%). Dilution of swine wastewater dramatically improved the power generation as the inhibitory effect was decreased. Zeolite and granular activated carbon were effective in the selective adsorption of ammonia or organic matter in swine wastewater, and so substantially improved the power generation, energy efficiency, and Coulombic efficiency. A smaller external resistor in the circuit was also observed to promote the organic matter degradation and thus to shorten the treatment time. Overall, air-cathode MFCs are promising for generating electrical power from livestock wastewater and meanwhile reducing the level of organic matter and nutrients.

Possibilities for extremophilic microorganisms in microbial electrochemical systems

Microbial electrochemical systems exploit the metabolism of microorganisms to generate electrical energy or a useful product. In the past couple of decades, the application of microbial electrochemical systems has increased from the use of wastewaters to produce electricity to a versatile technology that can use numerous sources for the extraction of electrons on the one hand, while on the other hand these electrons can be used to serve an ever increasing number of functions. Extremophilic microorganisms grow in environments that are hostile to most forms of life and their utilization in microbial electrochemical systems has opened new possibilities to oxidize substrates in the anode and produce novel products in the cathode. For example, extremophiles can be used to oxidize sulfur compounds in acidic pH to remediate wastewaters, generate electrical energy from marine sediment microbial fuel cells at low temperatures, desalinate wastewaters and act as biosensors of low amounts of organic carbon. In this review, we will discuss the recent advances that have been made in using microbial catalysts under extreme conditions and show possible new routes that extremophilic microorganisms open for microbial electrochemical systems.

Microbiome characterization of MFCs used for the treatment of swine manure

Conventional swine manure treatment is performed by anaerobic digestion, but nitrogen is not treated. Microbial Fuel Cells (MFCs) allow organic matter and nitrogen removal with concomitant electricity production. MFC microbiomes treating industrial wastewaters as swine manure have not been characterized. In this study, a multidisciplinary approach allowed microbiome relation with nutrient removal capacity and electricity production. Two different MFC configurations (C-1 and C-2) were used to treat swine manure. In C-1, the nitrification and denitrification processes took place in different compartments, while in C-2, simultaneous nitrification-denitrification occurred in the cathode. Clostridium disporicum and Geobacter sulfurreducens were identified in the anode compartments of both systems. C. disporicum was related to the degradation of complex organic matter compounds and G. sulfurreducens to electricity production. Different nitrifying bacteria populations were identified in both systems because of the different operational conditions. The highest microbial diversity was detected in cathode compartments of both configurations, including members of Bacteroidetes, Chloroflexiaceae and Proteobacteria. These communities allowed similar removal rates of organic matter (2.02-2.09 kg COD m(-3)d(-1)) and nitrogen (0.11-0.16 kg Nm(-3)d(-1)) in both systems. However, they differed in the generation of electric energy (20 and 2 mW m(-3) in C-1 and C-2, respectively).

Bioelectrogenic role of anoxic microbial anode in the treatment of chemical wastewater: microbial dynamics with bioelectro-characterization

A membrane-less anoxic bioelectrochemical treatment (AxBET) system was evaluated to study the influence of bioelectrogenic activity during the treatment of chemical wastewater (CW). Increment in power generation was observed with increase in substrate loading (61-204 mW/m(2)) indicating the ability of anodic bacteria in BET system to utilize the complex chemicals as the sole carbon source. Derivative analysis of voltammograms depicted by positive and negative peak potentials which relate to the extracellular electron transport sites (EETs) that presumably play a significant role in electron transfer. These self-driven redox mediators varied with respect to the substrate load. The microbial population was dominated by anaerobic microorganisms which are commonly involved in effluent treatment plants during the initial phase of operation. A gradual shift in the microbial community was observed towards enrichment of electrogenically active bacteria belonging to phyla viz., Firmicutes and Proteobacteria after prolonged operation. Shannon Index and principal component analysis correlated with the microbial profile studies. The feasibility of self-driven bioremediation of chemical wastewater in an AxBET system demonstrated bioelectricity production along with multipollutant removal simultaneously.

Brewery and liquid manure wastewaters as potential feedstocks for microbial fuel cells: a performance study

This work aims at the comparison of the electrical and chemical performance of microbial fuel cells (MFCs) fed with several types of brewery and manure industrial wastewaters. Experiments were conducted in a single-cell MFC with the cathode exposed to air operated in batch and fed-batch modes. In fed-batch mode, after 4 days of operation, a standard MFC was refilled with crude wastewater to regenerate the biofilm and recreate initial feeding conditions. Brewery wastewater (CV1) mixed with pig-farm liquid manure (PU sample) gave the highest voltage (199.8 mV) and power density (340 mW/m3) outputs than non-mixed brewery waste water. Also, coulombic efficiency is much larger in the mixture (11%) than in the others (2-3%). However, in terms of chemical oxygen demand removal, the performance showed to be poorer (53%) for the mixed sample than in the pure brewery sample (93%). Fed-batch operation showed to be a good alternate for quasi-continuous operation, with equivalent electrical and chemical yields as compared with normal batchwise operation.

Electricity generation and wastewater treatment of oil refinery in microbial fuel cells using Pseudomonas putida

Microbial fuel cells (MFCs) represent a novel platform for treating wastewater and at the same time generating electricity. Using Pseudomonasputida (BCRC 1059), a wild-type bacterium, we demonstrated that the refinery wastewater could be treated and also generate electric current in an air-cathode chamber over four-batch cycles for 63 cumulative days. Our study indicated that the oil refinery wastewater containing 2213 mg/L (ppm) chemical oxygen demand (COD) could be used as a substrate for electricity generation in the reactor of the MFC. A maximum voltage of 355 mV was obtained with the highest power density of 0.005 mW/cm² in the third cycle with a maximum current density of 0.015 mA/cm² in regard to the external resistor of 1000 Ω. A maximum coulombic efficiency of 6 × 10⁻²% was obtained in the fourth cycle. The removal efficiency of the COD reached 30% as a function of time. Electron transfer mechanism was studied using cyclic voltammetry, which indicated the presence of a soluble electron shuttle in the reactor. Our study demonstrated that oil refinery wastewater could be used as a substrate for electricity generation.

Synthesis of iron oxide/partly graphitized carbon composites as a high-efficiency and low-cost cathode catalyst for microbial fuel cells

Waste cornstalks and pomelo skins are used as carbon resources for preparing nanocomposites of iron oxide and partly graphitized carbon (Fe3O4/PGC-CS and Fe3O4/PGC-PS). The results showed that Fe3O4 with a face-centered cubic structure is uniformly dispersed on the skeleton of Fe3O4/GC, and the highest SBET values of Fe3O4/PGC-CS (476.5 m(2) g(-1)) and Fe3O4/PGC-PS (547.7 m(2) g(-1)) are obtained at 1000 °C. The electrical conductivity and density of catalytic active sites are correspondingly improved by the introduction of Fe species. Microbial fuel cells (MFCs) with a mixed composite (Fe3O4/PGC-CS:Fe3O4/PGC-PS = 1:1) cathode (three-dimensional structures) generate the highest power density of 1502 ± 30 mW m(-2), which is 26.01% higher than that of Pt/C (1192 ± 33 mW m(-2)) and only declines by 7.12% after 18 cycles. The Fe3O4/PGC-CS cathode has the highest Coulombic efficiency (24.3 ± 0.7%). The Fe3O4/PGC composites exhibit high oxygen reduction reactivity, low charge transfer resistances, and long-term stability and can be used as a low-cost and high-efficiency catalyst for MFCs.

Microbial community analysis of a single chamber microbial fuel cell using potato wastewater

Microbial fuel cells (MFCs) convert chemical energy to electrical energy via bio-electrochemical reactions mediated by microorganisms. This study investigated the diversity of the microbial community in an air cathode single chamber MFC that used potato-process wastewater as substrate. Terminal restriction fragment length polymorphism results indicated that the bacterial communities on the anode, cathode, control electrode, and MFC bulk fluid were similar, but differed dramatically from that of the anaerobic domestic sludge and potato wastewater inoculum. The 16S ribosomal DNA sequencing results showed that microbial species detected on the anode were predominantly within the phyla of Proteobacteria, Firmicutes, and Bacteroidetes. Fluorescent microscopy results indicated that there was a clear enhancement of biofilm formation on the anode. Results of this study could help improve understanding of the complexity of microbial communities and optimize the microbial composition for generating electricity by MFCs that use potato wastewater.

Treatment of landfill leachate using microbial fuel cells: alternative anodes and semi-continuous operation

Microbial fuel cells were designed and operated to treat landfill leachate while continuously producing power. Two different anodes were tested in batch cycles using landfill leachate as a substrate without inoculation: an activated carbon anode and biochar anode. In addition, a semi-continuous serpentine design was evaluated. No significant difference of the mean was found for the peak voltage, current density or power densities between the batch cell with activated carbon or biochar. Similar COD reduction occurred at both the batch (with biochar) and semi-continuous scale (28% ± 8.8% and 21.7% ± 12.2%, respectively). The batch MFC with activated carbon anode had significantly higher COD removal (74.7% ± 5.5%). BOD was removed by the semi-continuous MFC, but ammonia was not removed in four of the five cycles. The results provide further information on the possibility of using MFCs in landfill leachate treatment systems.

Swine wastewater treatment using a unique sequence of ion exchange membranes and bioelectrochemical system

An ion exchange biological reactor (IEBR) treated organic matter and nitrogen in swine wastewater at 23 °C. The enhanced IEBR enhanced the ammonium flux by electrochemical attraction. The abiotic ammonium fluxes at the applied voltage of 0, 1, and 3 V were 1.33, 1.79, and 2.73 mg/m(2)/s, respectively. In the meantime, the ammonium fluxes caused by biological nitrification at the applied voltage of 0, 1, and 3 V were 1.54, 2.07, and 3.59 mg/m(2)/s, respectively. Removal of organic matter and nitrogen in swine wastewater was proportional to the applied voltage. The average SCOD removal efficiencies at the applied voltage of 0, 1, and 2V were 59.7%, 60.2%, and 67.0%, respectively. The average total nitrogen removal efficiencies at the applied voltage of 0, 1, and 2V were 39.8%, 49.5%, and 58.7%, respectively.

From microbial fuel cell (MFC) to microbial electrochemical snorkel (MES): maximizing chemical oxygen demand (COD) removal from wastewater

The paper introduces the concept of the microbial electrochemical snorkel (MES), a simplified design of a "short-circuited" microbial fuel cell (MFC). The MES cannot provide current but it is optimized for wastewater treatment. An electrochemically active biofilm (EAB) was grown on graphite felt under constant polarization in an urban wastewater. Controlling the electrode potential and inoculating the bioreactor with a suspension of an established EAB improved the performance and the reproducibility of the anodes. Anodes, colonized by an EAB were tested for the chemical oxygen demand (COD) removal from urban wastewater using a variety of bio-electrochemical processes (microbial electrolysis, MFC, MES). The MES technology, as well as a short-circuited MFC, led to a COD removal 57% higher than a 1000 Ω-connected MFC, confirming the potential for wastewater treatment.

Electricity generation from mixed volatile fatty acids using microbial fuel cells

Fermentative hydrogen production, as a process for clean energy recovery from organic wastewater, is limited by its low hydrogen yield due to incomplete conversion of substrates, with most of the fermentation products being volatile fatty acids (VFAs). Thus, further recovery of the energy from VFAs is expected. In this work, microbial fuel cell (MFC) was applied to recover energy in the form of electricity from mixed VFAs of acetate, propionate, and butyrate. Response surface methodology was adopted to investigate the relative contribution and possible interactions of the three components of VFAs. A stable electricity generation was demonstrated in MFCs after the enrichment of electrochemically active bacteria. Analysis showed that power density was more sensitive to the composition of mixed VFAs than coulombic efficiency. The electricity generation could mainly be attributed to the portion of acetate and propionate. However, the two components showed an antagonistic effect when propionate exceeded 19%, causing a decrease in coulombic efficiency. Butyrate was found to exert a negative impact on both power density and coulombic efficiency. Denaturing gradient gel electrophoresis profiles revealed the enrichment of electrochemically active bacteria from the inoculum sludge. Proteobacteria (Beta-, Delta-) and Bacteroidetes were predominant in all VFA-fed MFCs. Shifts in bacterial community structures were observed when different compositions of VFA mixtures were used as the electron donor. The overall electron recovery efficiency may be increased from 15.7% to 27.4% if fermentative hydrogen production and MFC processes are integrated.

Microbial fuel cells and microbial ecology: applications in ruminant health and production research

Microbial fuel cell (MFC) systems employ the catalytic activity of microbes to produce electricity from the oxidation of organic, and in some cases inorganic, substrates. MFC systems have been primarily explored for their use in bioremediation and bioenergy applications; however, these systems also offer a unique strategy for the cultivation of synergistic microbial communities. It has been hypothesized that the mechanism(s) of microbial electron transfer that enable electricity production in MFCs may be a cooperative strategy within mixed microbial consortia that is associated with, or is an alternative to, interspecies hydrogen (H(2)) transfer. Microbial fermentation processes and methanogenesis in ruminant animals are highly dependent on the consumption and production of H(2)in the rumen. Given the crucial role that H(2) plays in ruminant digestion, it is desirable to understand the microbial relationships that control H(2) partial pressures within the rumen; MFCs may serve as unique tools for studying this complex ecological system. Further, MFC systems offer a novel approach to studying biofilms that form under different redox conditions and may be applied to achieve a greater understanding of how microbial biofilms impact animal health. Here, we present a brief summary of the efforts made towards understanding rumen microbial ecology, microbial biofilms related to animal health, and how MFCs may be further applied in ruminant research.

Hydrogen and methane production from swine wastewater using microbial electrolysis cells

The production of a useful and valuable product during swine wastewater treatment, such as hydrogen gas, could help to lower treatment costs. Hydrogen can theoretically be produced from wastewater by electrohydrogenesis in a microbial electrolysis cell (MEC) or by fermentation. Using a single-chamber MEC with a graphite-fiber brush anode, hydrogen gas was generated at 0.9-1.0 m(3) m(-3) day(-1) H2 using a full-strength or diluted swine wastewater. COD removals ranged from 8 to 29% in 20-h tests, and from 69 to 75% in longer tests (184 h) using full-strength wastewater. The gas produced was up to 77+/-11% hydrogen, with overall recoveries of up to 28+/-6% of the COD in the wastewater as hydrogen gas. Methane was also produced at a maximum of 13+/-4% of total gas volume. The efficiency of hydrogen production, based on the electrical energy needed (but excluding the energy in the wastewater) compared to the energy of the hydrogen gas produced, was as high as 190+/-39% in 42-h batch tests with undiluted wastewater, but was lower in longer batch tests of 184 h (91+/-6%). Hydrogen gas could not be recovered in fermentation tests using wastewater with a heat-treated inoculum. Hydrogen production was shown to be possible by fermentation when the wastewater was sterilized, but this process would not be practical or energy efficient. We therefore conclude from these tests that MECs are an effective method for hydrogen recovery from swine wastewater treatment, although the process needs to be further evaluated for reducing methane production, increasing the efficiency of converting the organic matter into current, and increasing recovery of hydrogen gas produced at the cathode.

Microbial electrolysis cells for high yield hydrogen gas production from organic matter

The use of electrochemically active bacteria to break down organic matter, combined with the addition of a small voltage (> 0.2 V in practice) in specially designed microbial electrolysis cells (MECs), can result in a high yield of hydrogen gas. While microbial electrolysis was invented only a few years ago, rapid developments have led to hydrogen yields approaching 100%, energy yields based on electrical energy input many times greater than that possible by water electrolysis, and increased gas production rates. MECs used to make hydrogen gas are similar in design to microbial fuel cells (MFCs) that produce electricity, but there are important differences in architecture and analytical methods used to evaluate performance. We review here the materials, architectures, performance, and energy efficiencies of these MEC systems that show promise as a method for renewable and sustainable energy production, and wastewater treatment.