Effects of betaine on enumeration of airborne bacteria

Field Survey on Generation Patterns of Airborne Fungi in a Livestock Manure Composting Plant in South Korea

Airborne fungi emitted from livestock manure composting plants are one of the major harmful factors causing respiratory disease for workers and nearby residents. Their generation of emissions is relatively high compared to other workplaces. This study investigated the emission characteristics of airborne fungi generated in livestock manure composting plants and utilized them as basic data to prevent workers’ health. The livestock manure composting plants selected for the survey in this study were according to the fermentation mode, including screw type, rotary type and natural dry type. The field evaluation period was from September 2019 to August 2020 and was surveyed monthly. The equipment for collecting airborne fungi was a six-stage cascade impactor. An analysis of the quantification and qualification of airborne fungi was conducted through a culture method and identification technique, respectively. The mean levels of airborne fungi in livestock manure composting plants were 1143 (±106)CFU m−3 for screw type, 552 (±146)CFU m−3 for rotary type and 434 (±73)CFU m−3 for natural dry type, respectively. Based on the results obtained from this study, the livestock manure composting plant operated by screw type showed the highest concentration of airborne fungi, followed by the rotary type and natural dry type. The monthly concentration of airborne fungi was the highest in June and the lowest in February, regardless of the livestock manure composting plant type. The concentration range of airborne fungi corresponding to the respiratory particle diameter was 40 to 60% relative to the concentration of all airborne fungi. The correlation relationship between airborne fungi and environmental factors (temperature, relative humidity, particulate matter and odor) was not found to be significant in livestock manure composting plants. The predominant genera of airborne fungi identified were Aspergillus spp., Cladosporium spp. and Penicillium spp.

Exposure Assessment of Airborne Bacteria Emitted from Swine Manure Composting Plant

This study was performed to investigate the distribution characteristics of airborne bacteria emitted from swine manure composting plants. The types of swine manure composting plants selected for the survey in this study were as follows: screw type, rotary type, and natural dry type. Mean levels of airborne bacteria in swine manure composting plants were 7428 (±1024) CFU m−3 for the screw type, 3246 (±1407) CFU m−3 for the rotary type, and 5232 (±1217) CFU m−3 for the natural dry type, respectively. Based on the results obtained from this study, the swine manure composting plant operated by screw type showed the highest concentration of airborne bacteria, followed by the natural dry type and rotary type. The monthly concentration of airborne bacteria was the highest in August and the lowest in November, regardless of the type of swine manure composting plant. The respirable size of airborne bacteria accounted for about 50% of the total. The ratio of respirable to the total quantity of airborne bacteria was 50%. The correlation relationships between airborne bacteria and environmental factors (temperature, relative humidity, particulate matters, and odor) were not found to be significant in the swine manure composting plants. The predominant genera of airborne bacteria identified were Micrococcus spp., Staphylococcus spp., Escherichia (E-coli) spp., Enterococcus spp., and Enterobacteriaceae spp.

Summertime fluorescent bioaerosol particles in the coastal megacity Tianjin, North China

Primary biological particles are an important subset of atmospheric aerosols. They have significant impacts on climate change and public health. Tianjin is a coastal megacity in the North China Plain, which is affected by both anthropogenic activities and marine air masses. To study the abundance and dynamic change of bioaerosols in Tianjin, fluorescent biological aerosol particles (FBAPs) in Tianjin were investigated by a wideband integrated bioaerosol sensor (WIBS-4A) in terms of number concentrations and size distributions in summer (11th -25th August 2018). Meanwhile, total suspended particles were collected and analyzed for chemical compounds to identify potential sources of bioaerosols. WIBS data showed that fluorescent biological particles exhibited two peaks at sunrise (~7:00) and in the evening (~20:00), which were probably caused by the enhancement of fungal spores and bacteria. Three rain events occurred during the observation period. Precipitation enhanced the abundance of biological particles, which were likely released from vegetation leaves, resuspended from soil surfaces, and/or carried by raindrops from high altitudes. The abundance of biological particles showed no significant correlation with Na⁺ (r = -0.17), indicating the air masses from marine areas carried limited biological particles compared to those from continental areas.

Aerobiology: Experimental Considerations, Observations, and Future Tools

Understanding airborne survival and decay of microorganisms is important for a range of public health and biodefense applications, including epidemiological and risk analysis modeling. Techniques for experimental aerosol generation, retention in the aerosol phase, and sampling require careful consideration and understanding so that they are representative of the conditions the bioaerosol would experience in the environment. This review explores the current understanding of atmospheric transport in relation to advances and limitations of aerosol generation, maintenance in the aerosol phase, and sampling techniques. Potential tools for the future are examined at the interface between atmospheric chemistry, aerosol physics, and molecular microbiology where the heterogeneity and variability of aerosols can be explored at the single-droplet and single-microorganism levels within a bioaerosol. The review highlights the importance of method comparison and validation in bioaerosol research and the benefits that the application of novel techniques could bring to increasing the understanding of aerobiological phenomena in diverse research fields, particularly during the progression of atmospheric transport, where complex interdependent physicochemical and biological processes occur within bioaerosol particles.

BOARD-INVITED REVIEW: fate and transport of bioaerosols associated with livestock operations and manures

Airborne microorganisms and microbial by-products from intensive livestock and manure management systems are a potential health risk to workers and individuals in nearby communities. This report presents information on zoonotic pathogens in animal wastes and the generation, fate, and transport of bioaerosols associated with animal feeding operations and land applied manures. Though many bioaerosol studies have been conducted at animal production facilities, few have investigated the transport of bioaerosols during the land application of animal manures. As communities in rural areas converge with land application sites, concerns over bioaerosol exposure will certainly increase. Although most studies at animal operations and wastewater spray irrigation sites suggest a decreased risk of bioaerosol exposure with increasing distance from the source, many challenges remain in evaluating the health effects of aerosolized pathogens and allergens in outdoor environments. To improve our ability to understand the off-site transport and diffusion of human and livestock diseases, various dispersion models have been utilized. Most studies investigating the transport of bioaerosols during land application events have used a modified Gaussian plume model. Because of the disparity among collection and analytical techniques utilized in outdoor studies, it is often difficult to evaluate health effects associated with aerosolized pathogens and allergens. Invaluable improvements in assessing the health effects from intensive livestock practices could be made if standardized bioaerosol collection and analytical techniques, as well as the use of specific target microorganisms, were adopted.

Investigation and application of methods for enumerating heterotrophs and Escherichia coli in the air within piggery sheds

AIMS

To investigate methods for the recovery of airborne bacteria within pig sheds and to then use the appropriate methods to determine the levels of heterotrophs and Escherichia coli in the air within sheds.

METHODS AND RESULTS

AGI-30 impingers and a six-stage Andersen multi-stage sampler (AMS) were used for the collection of aerosols. Betaine and catalase were added to impinger collection fluid and the agar plates used in the AMS. Suitable media for enumerating E. coli with the Andersen sampler were also evaluated. The addition of betaine and catalase gave no marked increase in the recovery of heterotrophs or E. coli. No marked differences were found in the media used for enumeration of E. coli. The levels of heterotrophs and E. coli in three piggeries, during normal pig activities, were 2.2 x 10(5) and 21 CFU m(-3) respectively.

CONCLUSIONS

The failure of the additives to improve the recovery of either heterotrophs or E. coli suggests that these organisms are not stressed in the piggery environment. The levels of heterotrophs in the air inside the three Queensland piggeries investigated are consistent with those previously reported in other studies. Flushing with ponded effluent had no marked or consistent effect on the heterotroph or E. coli levels.

SIGNIFICANCE AND IMPACT OF THE STUDY

Our work suggests that levels of airborne heterotrophs and E. coli inside pig sheds have no strong link with effluent flushing. It would seem unlikely that any single management activity within a pig shed has a dominant influence on levels of airborne heterotrophs and E. coli.

The role of osmotolerant rhizobacteria in rice growth under different drought conditions

Osmotolerant rhizobacterial isolates were used as inoculants for rice under different drought conditions in a greenhouse. Rice was grown on a Regosol, under either sterile or non-sterile conditions, in which the water level was adjusted to 80% and 40% of field capacity. Rice seed was inoculated with osmotolerant rhizobacterial isolates (isolates Al-19, A82, and M7b) and grown until the plant reached maximum vegetative phase (86 days from seed sowing). Inocula used were: Al-19 plus A82, Al-19 plus M7b, A82 plus M7b, and a mixture of 3 isolates. Under sterile conditions, inoculation of rice with the different inocula resulted in an increase in shoot dry weight, root dry weight, and number of tillers of 0–45.72%, 0.62–79.67%, and 0– 61.11%, respectively. Under non-sterile condition, shoot dry weight, root dry weight, and number of tillers increased by 19.66–28.04%, 14.00–91.33%, and 14.29–157.14%, respectively. The study also demonstrated that the role of osmotolerant rhizobacteria was more pronounced at 40% field capacity than 80% field capacity.

Osmoregulation and its importance to food-borne microorganisms

The control of water activity has been used as a means of preserving foods for thousands of years. This preservation strategy presents food-borne microorganisms with serious problems, many of which relate to the management of water flow. Although the specific details of how each organism deals with these problems are different, several common themes have emerged. Bacteria induce specific responses. both physiological and genetic, to respond to either the loss or the gain of water, triggered by changes in the osmolarity of the environment. Many of the key systems have now been identified and the mechanisms of their regulation are beginning to be understood. Here we review recent developments in the field of bacterial osmoregulation with emphasis on key food-borne genera.

Effect of aerosolization on culturability and viability of gram-negative bacteria

Estimations of the bacterial content of air can be more easily made now than a decade ago, with colony formation the method of choice for enumeration of airborne bacteria. However, plate counts are subject to error because bacteria exposed to the air may remain viable yet lose the ability to form colonies, i.e., they become viable but nonculturable. If airborne bacteria exhibit this phenomenon, colony formation data will significantly underestimate the bacterial populations in air samples. The objective of the study reported here was to determine the effect of aerosolization on viability and colony-forming ability of Serratia marcescens, Klebsiella planticola, and Cytophaga allerginae. A collision nebulizer was used to spray bacterial suspensions into an aerosol chamber, after which duplicate samples were collected in all-glass impingers over a 4-h period. Humidity was maintained at ca. 20 to 25%, and temperature was maintained at 20 to 22 degrees C for each of two replicate trials per microorganism. Viability was determined by using a modified direct viable count method, employing nalidixic acid or aztreonam and p-iodonitrotetrazolium violet (INT). Cells were stained with acridine orange and observed by epifluorescence microscopy to enumerate total and viable cells. Viable cells were defined as those elongating in the presence of antibiotic and/or reducing INT. CFU were determined by plating on tryptic soy agar and R2A agar. It was found that culture techniques did not provide an adequate description of the bacterial burdens of indoor air (i.e., less than 10% of the aerosolized bacteria were capable of forming visible colonies). It is concluded that total cell count procedures provide a better approximation of the number of bacterial cells in air and that procedures other than plate counting are needed to enumerate bacteria in aerosol samples, especially if the public health quality of indoor air is to be estimated.

Airborne Bacteria in the Atmospheric Surface Layer: Temporal Distribution above a Grass Seed Field

Temporal airborne bacterial concentrations and meteorological conditions were measured above a grass seed field in the Willamette River Valley, near Corvallis, Oreg., in the summer of 1993. The concentration of airborne bacteria had a maximum of 1,368.5 CFU/m(sup3), with a coefficient of variation of 90.5% and a mean of 121.3 CFU/m(sup3). The lowest concentration of bacteria occurred during the predawn hours, with an average of 32.2 CFU/m(sup3), while sunrise and early evening hours had the highest averages (164.7 and 158.1 CFU/m(sup3), respectively). The concentrations of bacteria in the atmosphere varied greatly, with a maximum difference between two 2-min samples of 1,995 CFU/m(sup3). The concentrations of bacteria in the atmosphere could be divided into five time periods during the day that were thought to be related to the local diurnal sea breeze and Pacific Coast monsoon weather conditions as follows: (i) the nighttime minimum concentration, i.e., 2300 to 0600 h; (ii) the sunrise peak concentration, i.e., 0600 to 0800 h; (iii) the midday accumulating concentration, i.e., 0800 to 1515 h; (iv) the late-afternoon sea breeze trough concentration, i.e., 1515 to 1700 h; and (v) the evening decrease to the nighttime minimum concentration, i.e., 1700 to 2300 h. The sunrise peak concentration (period ii) is thought to be a relatively general phenomenon dependent on ground heating by the sun, while the afternoon trough concentration is thought to be a relatively local phenomenon dependent on the afternoon sea breeze. Meteorological conditions are thought to be an important regulating influence on airborne bacterial concentrations in the outdoor atmosphere in the Willamette River Valley.

Influence of Serum and Glucose Additives on Survival of Actinobacillus pleuropneumoniae Aerosolized from the Freeze-Dried State

Serum and/or glucose added to Actinobacillus pleuropneumoniae suspensions before freeze-drying significantly increased survival rates of bacteria in aerosols. Aerosols with predictable numbers of viable bacteria can be made as required in an aerosol infection model. Sucrose supplementation of impinger fluids increased recovery of viable A. pleuropneumoniae.

Impaction onto a Glass Slide or Agar versus Impingement into a Liquid for the Collection and Recovery of Airborne Microorganisms

To study impaction versus impingement for the collection and recovery of viable airborne microorganisms, three new bioaerosol samplers have been designed and built. They differ from each other by the medium onto which the bioaerosol particles are collected (glass, agar, and liquid) but have the same inlet and collection geometries and the same sampling flow rate. The bioaerosol concentrations recorded by three different collection techniques have been compared with each other: impaction onto a glass slide, impaction onto an agar medium, and impingement into a liquid. It was found that the particle collection efficiency of agar slide impaction depends on the concentration of agar in the collection medium and on the sampling time, when samples are collected on a nonmoving agar slide. Impingement into a liquid showed anomalous behavior with respect to the sampling flow rate. Optimal sampling conditions in which all three new samplers exhibit the same overall sampling efficiency for nonbiological particles have been established. Inlet and collection efficiencies of about 100% have been achieved for all three devices at a sampling flow rate of 10 liters/min. The new agar slide impactor and the new impinger were then used to study the biological factors affecting the overall sampling efficiency. Laboratory experiments on the total recovery of a typical environmental microorganism, Pseudomonas fluorescens ATCC 13525, showed that both sampling methods, impaction and impingement, provided essentially the same total recovery when relatively nonstressed microorganisms were sampled under optimal sampling conditions. Comparison tests of the newly developed bioaerosol samplers with those commercially available showed that the incorporation of our research findings into the design of the new samplers yields better performance data than data from currently available samplers.

Glycine metabolism in anaerobes

Some strict anaerobic bacteria catalyze with glycine as substrate an internal Stickland reaction by which glycine serves as electron donor being oxidized by glycine-cleavage system or as electron acceptor being reduced by glycine reductase. In both cases, energy is conserved by substrate level phosphorylation. Except for the different substrate-activating proteins PB, reduction of sarcosine or betaine to acetyl phosphate involves in Eubacterium acidaminophilum the same set of proteins as observed for glycine, e.g. a unique thioredoxin system as electron donor and an acetyl phosphate-forming protein PC interacting with the intermediarily formed Secarboxymethylselenoether bound to protein PA.

Resuscitation effects of catalase on airborne bacteria

Catalase incorporation into enumeration media caused a significant increase (greater than 63%) in the colony-forming abilities of airborne bacteria. Incubation for 30 to 60 min of airborne bacteria in collection fluid containing catalase caused a greater than 95% increase in colony-forming ability. However, catalase did not have any effects on enumeration at high relative humidities (80 to 90%).