Flow cytometric assessment of Escherichia coli and Salmonella typhimurium starvation-survival in seawater using rhodamine 123, propidium iodide, and oxonol

Contribution of amino acids to Alicyclobacillus acidoterrestris DSM 3922T resistance towards acid stress

Spoilage of juice and beverages by a thermo-acidophilic bacterium, Alicyclobacillus acidoterrestris, has been considered to be a major and widespread concern for juice industry. Acid-resistant property of A. acidoterrestris supports its survival and multiplication in acidic juice and challenges the development of corresponding control measures. In this study, intracellular amino acid differences caused by acid stress (pH 3.0, 1 h) were determined by targeted metabolomics. The effect of exogenous amino acids on acid resistance of A. acidoterrestris and the related mechanisms were also investigated. The results showed that acid stress affected the amino acid metabolism of A. acidoterrestris, and the selected glutamate, arginine, and lysine contributed to its survival under acid stress. Exogenous glutamate, arginine, and lysine significantly increased the intracellular pH and ATP level, alleviated cell membrane damage, reduced surface roughness, and suppressed deformation caused by acid stress. Additionally, the up-regulated gadA and speA genes and the enhanced enzymatic activity confirmed that glutamate and arginine decarboxylase systems played a crucial role in maintaining pH homeostasis of A. acidoterrestris under acid stress. Our research reveals an important factor contributing to acid resistance of A. acidoterrestris, which provides an alternative target for effectively controlling this contaminant in fruit juices.

Essential Role for an Isoform of Escherichia coli Translation Initiation Factor IF2 in Repair of Two-Ended DNA Double-Strand Breaks

In Escherichia coli, three isoforms of the essential translation initiation factor IF2 (IF2-1, IF2-2, and IF2-3) are generated from separate in-frame initiation codons in infB. The isoforms have earlier been suggested to additionally participate in DNA damage repair and replication restart. It is also known that the proteins RecA and RecBCD are needed for repair of DNA double-strand breaks (DSBs) in E. coli. Here, we show that strains lacking IF2-1 are profoundly sensitive to two-ended DSBs in DNA generated by radiomimetic agents phleomycin or bleomycin, or by endonuclease I-SceI. However, these strains remained tolerant to other DSB-generating genotoxic agents or perturbations to which recA and recBC mutants remained sensitive, such as to mitomycin C, type-2 DNA topoisomerase inhibitors, or DSB caused by palindrome cleavage behind a replication fork. Data from genome-wide copy number analyses following I-SceI cleavage at a single chromosomal locus suggested that, in a strain lacking IF2-1, the magnitude of recombination-dependent replication through replication restart mechanisms is largely preserved but the extent of DNA resection around the DSB site is reduced. We propose that in the absence of IF2-1 it is the synapsis of a RecA nucleoprotein filament to its homologous target that is weakened, which in turn leads to a specific failure in assembly of Ter-to-oriC directed replisomes needed for consummation of two-ended DSB repair. IMPORTANCE Double-strand breaks (DSBs) in DNA are major threats to genome integrity. In Escherichia coli, DSBs are repaired by RecA- and RecBCD-mediated homologous recombination (HR). This study demonstrates a critical role for an isoform (IF2-1) of the translation initiation factor IF2 in the repair of two-ended DSBs in E. coli (that can be generated by ionizing radiation, certain DNA-damaging chemicals, or endonuclease action). It is proposed that IF2-1 acts to facilitate the function of RecA in the synapsis between a pair of DNA molecules during HR.

The Periplasmic Oxidoreductase DsbA Is Required for Virulence of the Phytopathogen Dickeya solani

In bacteria, the DsbA oxidoreductase is a crucial factor responsible for the introduction of disulfide bonds to extracytoplasmic proteins, which include important virulence factors. A lack of proper disulfide bonds frequently leads to instability and/or loss of protein function; therefore, improper disulfide bonding may lead to avirulent phenotypes. The importance of the DsbA function in phytopathogens has not been extensively studied yet. Dickeya solani is a bacterium from the Soft Rot Pectobacteriaceae family which is responsible for very high economic losses mainly in potato. In this work, we constructed a D. solani dsbA mutant and demonstrated that a lack of DsbA caused a loss of virulence. The mutant bacteria showed lower activities of secreted virulence determinants and were unable to develop disease symptoms in a potato plant. The SWATH-MS-based proteomic analysis revealed that the dsbA mutation led to multifaceted effects in the D. solani cells, including not only lower levels of secreted virulence factors, but also the induction of stress responses. Finally, the outer membrane barrier seemed to be disturbed by the mutation. Our results clearly demonstrate that the function played by the DsbA oxidoreductase is crucial for D. solani virulence, and a lack of DsbA significantly disturbs cellular physiology.

Whole-cell screening of oxidative enzymes using genetically encoded sensors

Biocatalysis is increasingly used for synthetic purposes in the chemical and especially the pharmaceutical industry. Enzyme discovery and optimization which is frequently needed to improve biocatalytic performance rely on high-throughput methods for activity determination. These methods should ideally be generic and applicable to entire enzyme families. Hydrogen peroxide (H2O2) is a product of several biocatalytic oxidations and its formation can serve as a proxy for oxidative activity. We designed a genetically encoded sensor for activity measurement of oxidative biocatalysts via the amount of intracellularly-formed H2O2. A key component of the sensor is an H2O2-sensitive transcriptional regulator, OxyR, which is used to control the expression levels of fluorescent proteins. We employed the OxyR sensor to monitor the oxidation of glycerol to glyceraldehyde and of toluene to o-cresol catalysed by recombinant E. coli expressing an alcohol oxidase and a P450 monooxygenase, respectively. In case of the P450 BM3-catalysed reaction, we additionally monitored o-cresol formation via a second genetically encoded sensor based on the phenol-sensitive transcriptional activator, DmpR, and an orthogonal fluorescent reporter protein. Single round screens of mutant libraries by flow cytometry or by visual inspection of colonies on agar plates yielded significantly improved oxidase and oxygenase variants thus exemplifying the suitability of the sensor system to accurately assess whole-cell oxidations in a high-throughput manner.

Estimation of Microbial Viability Using Flow Cytometry

For microorganisms in particular, viability is a term that is difficult to define and a state consequently difficult to measure. The traditional (and gold standard) usage equates viability and culturability (i.e., the ability to multiply) but the process of determining culturability is often too slow. Flow cytometry provides the opportunity to make rapid and quantitative measurements of dye uptake in large numbers of cells and we can therefore exploit the flow cytometric approach to evaluate so-called viability stains and to develop protocols for more routine assessments of microbial viability. This article provides a commentary and several protocols have been included to ensure that users have a firm basis for attempting these reasonably difficult assays on traditional flow cytometer instruments. What is clear is that each assay must be carefully validated with the particular microorganism of interest before being applied in any research, clinical, or service form. © 2020 The Authors.

How to Evaluate Non-Growing Cells-Current Strategies for Determining Antimicrobial Resistance of VBNC Bacteria

Thanks to the achievements in sanitation, hygiene practices, and antibiotics, we have considerably improved in our ongoing battle against pathogenic bacteria. However, with our increasing knowledge about the complex bacterial lifestyles and cycles and their plethora of defense mechanisms, it is clear that the fight is far from over. One of these resistance mechanisms that has received increasing attention is the ability to enter a dormancy state termed viable but non-culturable (VBNC). Bacteria that enter the VBNC state, either through unfavorable environmental conditions or through potentially lethal stress, lose their ability to grow on standard enrichment media, but show a drastically increased tolerance against antimicrobials including antibiotics. The inability to utilize traditional culture-based methods represents a considerable experimental hurdle to investigate their increased antimicrobial resistance and impedes the development and evaluation of effective treatments or interventions against bacteria in the VBNC state. Although experimental approaches were developed to detect and quantify VBNCs, only a few have been utilized for antimicrobial resistance screening and this review aims to provide an overview of possible methodological approaches.

Effect of Substrate Characteristics on the Growth and Sporulation of Two Biocontrol Microorganisms during Solid State Cultivation

Biocontrol agents are a group of naturally occurring organisms capable of interrupting the lifespan and suppressing the propagation of disease organisms. The use of biocontrol agents offers an environment-friendly and sustainable solution to the synthetic agrochemicals. In this study, we investigated parboiled rice and millets as substrates for spore production of two model biocontrol microorganisms (Bacillus pumilus and Streptomyces griseus) under solid state cultivation (SSC) conditions. The effects of cultivation parameters such as initial moisture content, water activity, and cultivation time on microbial growth and spore production were studied. Furthermore, texture profile analysis was performed to test the stress and strain curve and the hardness and stickiness of the substrates. The greatest spore production occurred at 50% moisture content with millets as a substrate, yielding a count of 1.34 × 108 spores/g-wet-substrate enumerated with plate count analysis and 1.70 × 108 events/g-wet-substrate using flow cytometry analysis. Substrate texture profile was highly correlative to the initial moisture content and substrate type and all proved to be essential process variables in controlling the bacterial growth and sporulation during SSC processes.

Photothermal-assisted antibacterial application of graphene oxide-Ag nanocomposites against clinically isolated multi-drug resistant Escherichia coli

In the field of public health, treatment of multidrug-resistant (MDR) bacterial infection is a great challenge. Herein, we provide a solution to this problem with the use of graphene oxide-silver (GO-Ag) nanocomposites as antibacterial agent. Following established protocols, silver nanoparticles were grown on graphene oxide sheets. Then, a series of in vitro studies were conducted to validate the antibacterial efficiency of the GO-Ag nanocomposites against clinical MDR Escherichia coli (E. coli) strains. GO-Ag nanocomposites showed the highest antibacterial efficiency among tested antimicrobials (graphene oxide, silver nanoparticles, GO-Ag), and synergetic antibacterial effect was observed in GO-Ag nanocomposites treated group. Treatment with 14.0 µg ml-1 GO-Ag could greatly inhibit bacteria growth; remaining bacteria viabilities were 4.4% and 4.1% for MDR-1 and MDR-2 E. coli bacteria, respectively. In addition, with assistance of photothermal effect, effective sterilization could be achieved using GO-Ag nanocomposites as low as 7.0 µg ml-1. Fluorescence imaging and morphology characterization uncovered that bacteria integrity was disrupted after GO-Ag nanocomposites treatment. Cytotoxicity results of GO-Ag using human-derived cell lines (HEK 293T, Hep G2) suggested more than 80% viability remained at 7.0 µg ml-1. All the results proved that GO-Ag nanocomposites are efficient antibacterial agent against multidrug-resistant E. coli.

Investigating the Effects of Osmolytes and Environmental pH on Bacterial Persisters

Bacterial persisters are phenotypic variants that temporarily demonstrate an extraordinary tolerance toward antibiotics. Persisters have been linked to the recalcitrance of biofilm-related infections; hence, a complete understanding of their physiology can lead to improvement of therapeutic strategies for such infections. Mechanisms pertaining to persister formation are thought to be associated with stress response pathways triggered by intra- or extracellular stress factors. Unfortunately, studies demonstrating the effects of osmolyte- and/or pH-induced stresses on bacterial persistence are largely missing. To fill this knowledge gap within the field, we studied the effects of various osmolytes and pH conditions on Escherichia coli persistence with the use of phenotype microarrays and antibiotic tolerance assays. Although we found that a number of chemicals and pH environments, including urea, sodium nitrite, and acidic pH, significantly reduced persister formation in E. coli compared to no-osmolyte/no-buffer controls, this reduction in persister levels was less pronounced in late-stationary-phase cultures. Our results further demonstrated a positive correlation between cell growth and persister formation, which challenges the general notion in the field that slow-growing cultures have more persister cells than fast-growing cultures.

A Rapid Fluorescence-Based Microplate Assay to Investigate the Interaction of Membrane Active Antimicrobial Peptides with Whole Gram-Positive Bacteria

Background: Membrane-active antimicrobial peptides (AMPs) are interesting candidates for the development of novel antimicrobials. Although their effects were extensively investigated in model membrane systems, interactions of AMPs with living microbial membranes are less known due to their complexity. The aim of the present study was to develop a rapid fluorescence-based microplate assay to analyze the membrane effects of AMPs in whole Staphylococcus aureus and Staphylococcus epidermidis. Methods: Bacteria were exposed to bactericidal and sub-inhibitory concentrations of two membrane-active AMPs in the presence of the potential-sensitive dye 3,3′-dipropylthiadicarbocyanine iodide (diSC₃(5)) and the DNA staining dye propidium iodide (PI), to simultaneously monitor and possibly distinguish membrane depolarization and membrane permeabilization. Results: The ion channel-forming gramicidin D induced a rapid increase of diSC₃(5), but not PI fluorescence, with slower kinetics at descending peptide concentrations, confirming killing due to membrane depolarization. The pore-forming melittin, at sub-MIC and bactericidal concentrations, caused, respectively, an increase of PI fluorescence in one or both dyes simultaneously, suggesting membrane permeabilization as a key event. Conclusions: This assay allowed the distinction between specific membrane effects, and it could be applied in the mode of action studies as well as in the screening of novel membrane-active AMPs.

A General Workflow for Characterization of Nernstian Dyes and Their Effects on Bacterial Physiology

The electrical membrane potential (V_m) is one of the components of the electrochemical potential of protons across the biological membrane (proton motive force), which powers many vital cellular processes. Because V_m also plays a role in signal transduction, measuring it is of great interest. Over the years, a variety of techniques have been developed for the purpose. In bacteria, given their small size, Nernstian membrane voltage probes are arguably the favorite strategy, and their cytoplasmic accumulation depends on V_m according to the Nernst equation. However, a careful calibration of Nernstian probes that takes into account the tradeoffs between the ease with which the signal from the dye is observed and the dyes’ interactions with cellular physiology is rarely performed. Here, we use a mathematical model to understand such tradeoffs and apply the results to assess the applicability of the Thioflavin T dye as a V_m sensor in Escherichia coli. We identify the conditions in which the dye turns from a V_m probe into an actuator and, based on the model and experimental results, propose a general workflow for the characterization of Nernstian dye candidates.

Fluorescent Probes for the Visualization of Cell Viability

Monitoring cell viability is a crucial task essential for the fundamental studies in apoptosis, necrosis, and drug discovery. Cell apoptosis and necrosis are significant to maintain the cell population, and their abnormality can lead to severe diseases including cancer. During cell death, significant changes occur in the intracellular contents and physical properties, such as decrease of esterase activity, depolarization of the mitochondrial membrane potential (ΔΨ_m), increase of caspase content, dissipation of membrane asymmetry, and loss of membrane integrity. To detect cell viability, the fluorescent probes have been developed by taking advantage of these biological parameters and using various fluorescence mechanisms. These fluorescent probes can serve as powerful tools to facilitate the research in biology and pathology. In this Account, the representative examples of the fluorescent probes for cell viability during the past decades have been summarized and classified into five types based on the biological changes. The basic principle, design strategy, fluorescence mechanisms, and molecular construction of these fluorescent probes have been discussed. Furthermore, the intrinsic characteristics and merits of these probes have been illustrated. Particularly, this Account describes our recent works for the design and synthesis of the fluorescent probes to detect cell viability in the dual-color and reversible modes. The dual-color and reversible fluorescent probes are highlighted owing to their unique benefits in accurate and dynamic detection of cell viability. In general, the dual-color fluorescent probes were constructed based on the loss of esterase activity during cell death. Excited-state intramolecular proton transfer (ESIPT) and intramolecular charge transfer (ICT) process were exploited for the probe design. The construction of such dual-color probes were realized by the acetate of the phenyl group on fluorophores. Esterases in healthy cells hydrolyze the acetate and bring a spectral shift to the probes. Moreover, reversible fluorescent probes for cell viability were designed based on the depolarization of ΔΨ_m, with relocalization properties dependent on ΔΨ_m. The probes target mitochondria in healthy cells with high ΔΨ_m, while they are relocalized into the nucleus in unhealthy cells with depolarized ΔΨ_m. As ΔΨ_m is reversibly changed according to the cell viability, these probes reversibly detect cell viability. The reversible and simultaneously dual-color fluorescent probes were developed based on the relocalization mode and aggregation-induced emission shift. The probes target mitochondria to form aggregates with deep-red emission, while they migrate into the nucleus to present in monomers with green fluorescence. In this manner, the probes enable dual-color and reversible detection of cell viability. Fluorescent probes for cell viability based on sensing the membrane integrity, caspase activity, and membrane symmetry are also presented. High-polarity and large-size fluorescent probes impermeable to the intact lipid bilayer selectively target apoptotic cells with a destructive plasma membrane. Fluorescent probes sensing caspases in a turn-on manner exclusively light up apoptotic cells with caspase expression. Membrane-impermeable probes with high affinity to phosphatidylserine (PS) specifically stain the plasma membrane of dead cells, since PS flip-flops to the outer leaflet of the membrane during cell death. In summary, this Account illustrates the basic principles, design strategies, characteristics, and advantages of the fluorescent probes for cell viability, and it highlights the dual-color and reversible probes, which can promote the development of fluorescent probes, apoptosis studies, drug discovery, and other relative areas.

Power-law tail in lag time distribution underlies bacterial persistence

Genetically identical microbial cells respond to stress heterogeneously, and this phenotypic heterogeneity contributes to population survival. Quantitative analysis of phenotypic heterogeneity can reveal dynamic features of stochastic mechanisms that generate heterogeneity. Additionally, it can enable a priori prediction of population dynamics, elucidating microbial survival strategies. Here, we quantitatively analyzed the persistence of an Escherichia coli population. When a population is confronted with antibiotics, a majority of cells is killed but a subpopulation called persisters survives the treatment. Previous studies have found that persisters survive antibiotic treatment by maintaining a long period of lag phase. When we quantified the lag time distribution of E. coli cells in a large dynamic range, we found that normal cells rejuvenated with a lag time distribution that is well captured by an exponential decay [exp(-kt)], agreeing with previous studies. This exponential decay indicates that their rejuvenation is governed by a single rate constant kinetics (i.e., k is constant). Interestingly, the lag time distribution of persisters exhibited a long tail captured by a power-law decay. Using a simple quantitative argument, we demonstrated that this power-law decay can be explained by a wide variation of the rate constant k Additionally, by developing a mathematical model based on this biphasic lag time distribution, we quantitatively explained the complex population dynamics of persistence without any ad hoc parameters. The quantitative features of persistence demonstrated in our work shed insights into molecular mechanisms of persistence and advance our knowledge of how a microbial population evades antibiotic treatment.

Antimicrobial Properties of 2D MnO2 and MoS2 Nanomaterials Vertically Aligned on Graphene Materials and Ti3C2 MXene

Two-dimensional (2D) nanomaterials have attracted considerable attention in biomedical and environmental applications due to their antimicrobial activity. In the interest of investigating the primary antimicrobial mode-of-action of 2D nanomaterials, we studied the antimicrobial properties of MnO₂ and MoS₂, toward Gram-positive and Gram-negative bacteria. Bacillus subtilis and Escherichia coli bacteria were treated individually with 100 μg/mL of randomly oriented and vertically aligned nanomaterials for ∼3 h in the dark. The vertically aligned 2D MnO₂ and MoS₂ were grown on 2D sheets of graphene oxide, reduced graphene oxide, and Ti₃C₂ MXene. Measurements to determine the viability of bacteria in the presence of the 2D nanomaterials performed by using two complementary techniques, flow cytometry, and fluorescence imaging showed that, while MnO₂ and MoS₂ nanosheets show different antibacterial activities, in both cases, Gram-positive bacteria show a higher loss in membrane integrity. Scanning electron microscopy images suggest that the 2D nanomaterials, which have a detrimental effect on bacteria viability, compromise the cell wall, leading to significant morphological changes. We propose that the peptidoglycan mesh (PM) in the bacterial wall is likely the primary target of the 2D nanomaterials. Vertically aligned 2D MnO₂ nanosheets showed the highest antimicrobial activity, suggesting that the edges of the nanosheets were likely compromising the cell walls upon contact.

Reevaluating multicolor flow cytometry to assess microbial viability

Flow cytometry is a rapid and quantitative method to determine bacterial viability. Although different stains can be used to establish viability, staining protocols are inconsistent and lack a general optimization approach. Very few "true" multicolor protocols, where dyes are combined in one sample, have been developed for microbiological applications. In this mini-review, the discrepancy between protocols for cell-permeant nucleic acid and functional stains are discussed as well as their use as viability dyes. Furthermore, optimization of staining protocols for a specific setup are described. Original data using the red-excitable SYTO dyes SYTO 59 to 64 and SYTO 17, combined with functional stains, for double and triple staining applications is also included. As each dye and dye combination behaves differently within a certain combination of medium matrix, microorganism, and instrument, protocols need to be tuned to obtain reproducible results. Therefore, single, double, and triple stains are reviewed, including the different parameters that influence staining such as stain kinetics, optimal stain concentration, and the effect of the chelator EDTA as membrane permeabilizer. In the last section, we highlight the need to investigate the stability of multicolor assays to ensure correct results as multiwell autoloaders are now commonly used.

Multimerization of a Proline-Rich Antimicrobial Peptide, Chex-Arg20, Alters Its Mechanism of Interaction with the Escherichia coli Membrane

A3-APO, a de novo designed branched dimeric proline-rich antimicrobial peptide (PrAMP), is highly effective against a variety of in vivo bacterial infections. We undertook a selective examination of the mechanism for the Gram-negative Escherichia coli bacterial membrane interaction of the monomer (Chex-Arg20), dimer (A3-APO), and tetramer (A3-APO disulfide-linked dimer). All three synthetic peptides were effective at killing E. coli. However, the tetramer was 30-fold more membrane disruptive than the dimer while the monomer showed no membrane activity. Using flow cytometry and high-resolution fluorescent microscopy, it was observed that dimerization and tetramerization of the Chex-Arg20 monomer led to an alteration in the mechanism of action from non-lytic/membrane hyperpolarization to membrane disruption/depolarization. Our findings show that the membrane interaction and permeability of Chex-Arg20 was altered by multimerization.

Silica Gel for Enhanced Activity and Hypochlorite Protection of Cyanuric Acid Hydrolase in Recombinant Escherichia coli

Chlorinated isocyanuric acids are widely used water disinfectants that generate hypochlorite, but with repeated application, they build up cyanuric acid (CYA) that must be removed to maintain disinfection. 3-Aminopropyltriethoxysilane (APTES)-treated Escherichia coli cells expressing cyanuric acid hydrolase (CAH) from Moorella thermoacetica exhibited significantly high CYA degradation rates and provided protection against enzyme inactivation by hypochlorite (chlorine). APTES coating or encapsulation of cells had two benefits: (i) overcoming diffusion limitations imposed by the cell wall and (ii) protecting against hypochlorite inactivation of CAH activity. Cells encapsulated in APTES gels degraded CYA three times faster than nonfunctionalized tetraethoxysilane (TEOS) gels, and cells coated with APTES degraded CYA at a rate of 29 µmol/min per mg of CAH protein, similar to the rate with purified enzyme. UV spectroscopy, fluorescence spectroscopy, and scanning electron microscopy showed that the higher rates were due to APTES increasing membrane permeability and enhancing cyanuric acid diffusion into the cytoplasm to reach the CAH enzyme. Purified CAH enzyme was shown to be rapidly inactivated by hypochlorite. APTES aggregates surrounding cells protected via the amine groups reacting with hypochlorite as shown by pH changes, zeta potential measurements, and infrared spectroscopy. APTES-encapsulated E. coli cells expressing CAH degraded cyanuric acid at high rates in the presence of 1 to 10 ppm hypochlorite, showing effectiveness under swimming pool conditions. In contrast, CAH activity in TEOS gels or free cells was completely inactivated by hypochlorite. These studies show that commercially available silica materials can selectively enhance, protect, and immobilize whole-cell biocatalysts for specialized applications.

Hypochlorite is used in vast quantities for water disinfection, killing bacteria on surfaces, and washing and whitening. In pools, spas, and other waters, hypochlorite is frequently delivered as chlorinated isocyanuric acids that release hypochlorite and cyanuric acid. Over time, cyanuric acid accumulates and impairs disinfection and must be removed. The microbial enzyme cyanuric acid hydrolase can potentially remove cyanuric acid to restore disinfection and protect swimmers. Whole bacterial cells expressing cyanuric acid hydrolase were encapsulated in an inert silica matrix containing an amine group. The amine group serves to permeabilize the cell membrane and accelerate cyanuric acid degradation, and it also reacts with hypochlorite to protect against inactivation of cyanuric acid hydrolase. Methods for promoting whole-cell biocatalysis are important in biotechnology, and the present work illustrates approaches to enhance rates and protect against an inhibitory substance.

Bacterial Cyanuric Acid Hydrolase for Water Treatment

Di- and trichloroisocyanuric acids are widely used as water disinfection agents, but cyanuric acid accumulates with repeated additions and must be removed to maintain free hypochlorite for disinfection. This study describes the development of methods for using a cyanuric acid-degrading enzyme contained within nonliving cells that were encapsulated within a porous silica matrix. Initially, three different bacterial cyanuric acid hydrolases were compared: TrzD from Acidovorax citrulli strain 12227, AtzD from Pseudomonas sp. strain ADP, and CAH from Moorella thermoacetica ATCC 39073. Each enzyme was expressed recombinantly in Escherichia coli and tested for cyanuric acid hydrolase activity using freely suspended or encapsulated cell formats. Cyanuric acid hydrolase activities differed by only a 2-fold range when comparing across the different enzymes with a given format. A practical water filtration system is most likely to be used with nonviable cells, and all cells were rendered nonviable by heat treatment at 70°C for 1 h. Only the CAH enzyme from the thermophile M. thermoacetica retained significant activity under those conditions, and so it was tested in a flowthrough system simulating a bioreactive pool filter. Starting with a cyanuric acid concentration of 10,000 μM, more than 70% of the cyanuric acid was degraded in 24 h, it was completely removed in 72 h, and a respike of 10,000 μM cyanuric acid a week later showed identical biodegradation kinetics. An experiment conducted with water obtained from municipal swimming pools showed the efficacy of the process, although cyanuric acid degradation rates decreased by 50% in the presence of 4.5 ppm hypochlorite. In total, these experiments demonstrated significant robustness of cyanuric acid hydrolase and the silica bead materials in remediation.

Fluorescence in situ hybridization and sequential catalyzed reporter deposition (2C-FISH) for the flow cytometric sorting of freshwater ultramicrobacteria

Flow cytometric sorting is a powerful tool to physically separate cells within mixed microbial communities. If combined with phylogenetic staining (fluorescence in situ hybridization, FISH) it allows to specifically sort defined genotypic microbial populations from complex natural samples. However, the targeted enrichment of freshwater ultramicrobacteria, such as members of the LD12 clade of Alphaproteobacteria (SAR11-IIIb), is still challenging. Current FISH protocols, even in combination with signal amplification by catalyzed reporter deposition (CARD), are not sufficiently sensitive for the distinction of these bacteria from background noise by flow cytometry, presumably due to their low ribosome content and small cell sizes. We, therefore, modified a CARD based flow sorting protocol with the aim of increasing its sensitivity to a level sufficient for ultramicrobacteria. This was achieved by a second signal amplification step mediated by horseradish peroxidase labeled antibodies targeted to the fluorophores that were previously deposited by CARD-FISH staining. The protocol was tested on samples from an oligo-mesotrophic lake. Ultramicrobacteria affiliated with LD12 Alphaproteobacteria could be successfully sorted to high purity by flow cytometry. The ratios of median fluorescence signal to background ranged around 20, and hybridization rates determined by flow cytometry were comparable to those obtained by fluorescence microscopy. Potential downstream applications of our modified cell staining approach range from the analysis of microdiversity within 16S rRNA-defined populations to that of functional properties, such as the taxon-specific incorporation rates of organic substrates.

Differential innate immune responses of bovine peripheral blood leukocytes to Salmonella enterica serovars Dublin, Typhimurium, and Enteritidis

The majority of Salmonella serovars cause no clinical disease in cattle, while some are associated with severe disease. The objective of the current study was to determine the innate immune responses of bovine peripheral blood leukocytes exposed to Salmonella enterica serovar Dublin (bovine-specific), Salmonella typhimurium (murine adapted, but zoonotic), and Salmonella enteritidis (poultry host-adapted) in 3-week-old calves. All Salmonella exposures increased cell surface CD14 and CD18 regardless of serovar. The greatest CD14 marker mean fluorescence was in monocytes and the greatest mean fluorescent of the marker mean was in neutrophils. Phagocytosis increased with all serovars, but was not different among them. Neutrophils had the greatest marker mean fluorescence for phagocytosis, with all serovars being equal. Oxidative burst increased in all serovars compared to control cells, but were not different among the serovars. Neutrophils and monocytes were similar in the oxidative burst, with limited oxidative burst detected in the primarily lymphocyte population. mRNA expression of TNF-α, IL-8, and IL-12, increased above the control cells whereas none of these serovars affected mRNA expression of TLR4. TNF-α was greatest in S. enterica and S. typhimurium, compared to Salmonella dublin. In contrast, IL-8 was expressed more in S. dublin than S. typhiurium, with S. Enteriditus intermediary. These results show while cell surface markers, phagocytosis, and oxidative burst were largely unaffected by serovar, cytokine and chemokine expression differed among the Salmonella serovars. It appears that internal responses of the cells differ, rather than cell recognition, creating pathogenicity differences among of the serovars, even in the neonate with developing immunity.

Biodecolorization and biodegradation potential of recalcitrant triphenylmethane dyes by Coriolopsis sp. isolated from compost

Triphenylmethane dyes (TPM) are recalcitrant colorants brought into the environment. In this study, a lesser-known white rot fungus Coriolopsis sp. (1c3), isolated from compost of Empty Fruit Bunch (EFB) of oil palm, was explored for its decolorization potential of TPM dyes. The isolate 1c3 demonstrated good decolorization efficiencies in the treatment of Crystal Violet (CV; 100 mg l(-1)), Methyl Violet (MV; 100 mg l(-1)) and Cotton Blue (CB; 50 mg(-1)), with 94%, 97% and 91%, within 7, 7 and 1 day(s), respectively. Malachite Green (MG; 100 mg l(-1)) was the most recalcitrant dye, with 52% decolorization after 9 days. Dye removal by 1c3 was presumably via biosorption, whereby the process was determined to be influenced by fungal biomass, initial dye concentrations and oxygen requirements. Biodegradation was also a likely mechanism responsible for dye removal by 1c3, occurred as indicated by the reduction of dye spectra peaks. Detection of laccase, lignin peroxidase and NADH-DCIP reductase activities further substantiate the possible occurrence of biodegradation of TPM dyes by 1c3.

Feedbacks between protistan single-cell activity and bacterial physiological structure reinforce the predator/prey link in microbial foodwebs

The trophic interactions between bacteria and their main predators, the heterotrophic nanoflagellates (HNFs), play a key role in the structuring and functioning of aquatic microbial food webs. Grazing regulation of bacterial communities, both of biomass and community structure, have been frequently reported. Additionally, bottom-up responses of the HNF at the population level (numerical responses) have also been extensively described. However, the functional response of HNF at the single-cell level has not been well explored. In this study, we concurrently measured the physiological structure of bacterial communities and HNF single-cell activities during re-growth cultures of natural aquatic communities. We found that changes in the abundance and proportion of the preferred, highly active bacterial prey, caused by the feeding activity of their predators (HNF), induced a negative feedback effect on the single-cell activity of these HNF. These shifts in the specific cellular activity of HNF occur at a much shorter time scale than population level shifts in flagellate abundance, and offer a complementary mechanism to explain not only the tight coupling between bacteria and HNF, but also the relative constancy of bacterial abundance in aquatic ecosystems.

Cell-death assessment by fluorescent and nonfluorescent cytosolic and nuclear staining techniques

Apoptosis, a genetically programmed cellular event leads to biochemical and morphological changes in cells. Alterations in DNA caused by several factors affect nucleus and ultimately the entire cell leading to compromised function of the organ and organism. DNA, a master regulator of the cellular events, is an important biomolecule with regards to cell growth, cell death, cell migration and cell differentiation. It is therefore imperative to develop the staining techniques that may lead to visualize the changes in nucleus where DNA is housed, to comprehend the cellular pathophysiology. Over the years a number of nuclear staining techniques such as propidium iodide, Hoechst-33342, 4', 6-diamidino-2-phenylindole (DAPI), Acridine orange-Ethidium bromide staining, among others have been developed to assess the changes in DNA. Some nonnuclear staining techniques such as Annexin-V staining, which although does not stain DNA, but helps to identify the events that result from DNA alteration and leads to initiation of apoptotic cell death. In this review, we have briefly discussed some of the most commonly used fluorescent and nonfluorescent staining techniques that identify apoptotic changes in cell, DNA and the nucleus. These techniques help in differentiating several cellular and nuclear phenotypes that result from DNA damage and have been identified as specific to necrosis or early and late apoptosis as well as scores of other nuclear deformities occurring inside the cells.

Mechanosensitive channels and bacterial cell wall integrity: does life end with a bang or a whimper?

Mechanogated channels are fundamental components of bacterial cells that enable retention of physical integrity during extreme increases in cell turgor. Optical tweezers combined with microfluidics have been used to study the fate of individual Escherichia coli cells lacking such channels when subjected to a bursting stress caused by increased turgor. Fluorescence-activated cell sorting and electron microscopy complement these studies. These analyses show that lysis occurs with a high probability, but the precise path differs between individual cells. By monitoring the loss of cytoplasmic green fluorescent protein, we have determined that some cells release this protein but remain phase dark (granular) consistent with the retention of the majority of large proteins. By contrast, most cells suffer cataclysmic wall failure leading to loss of granularity but with the retention of DNA and overall cell shape (protein-depleted ghosts). The time span of these events induced by hypo-osmotic shock varies but is of the order of milliseconds. The data are interpreted in terms of the timing of mechanosensitive channel gating relative to osmotically induced water influx.

Efficacy of a dual fluorescence method in detecting the viability of overwintering cyanobacteria

Chill in the light is the major environmental stress that cyanobacteria encounter in winter. Cyanobacterial cells may acquire chill-light tolerance upon exposure to low temperature in autumn and early winter. We sought to establish the efficacy of the dual fluorescence method in detecting the viability of overwintering cyanobacteria and to provide further evidence for the chill-light tolerance of preconditioned cyanobacteria. Synechocystis sp. PCC 6803 and Microcystis aeruginosa PCC 7806 were exposed to chill (5°C)-light stress with or without pretreatment at 15°C and stained with SYTO 9 and propidium iodide. Live and dead cells were observed under a fluorescence microscope, and the percentage of viable cells was quantified on a microplate reader. The dual fluorescence method showed consistent results with tests of the ability to reinitiate growth. Cell viability was quantitatively correlated with ratio of SYTO 9/propidium iodide fluorescence. Previously, Microcystis colonies in Lake Taihu had been found to accumulate RNA-binding protein 1 in autumn and winter. Use of this method directly showed the viability of such Microcystis colonies throughout the winter.

The endosymbiont Amoebophilus asiaticus encodes an S-adenosylmethionine carrier that compensates for its missing methylation cycle

All organisms require S-adenosylmethionine (SAM) as a methyl group donor and cofactor for various biologically important processes. However, certain obligate intracellular parasitic bacteria and also the amoeba symbiont Amoebophilus asiaticus have lost the capacity to synthesize this cofactor and hence rely on its uptake from host cells. Genome analyses revealed that A. asiaticus encodes a putative SAM transporter. The corresponding protein was functionally characterized in Escherichia coli: import studies demonstrated that it is specific for SAM and S-adenosylhomocysteine (SAH), the end product of methylation. SAM transport activity was shown to be highly dependent on the presence of a membrane potential, and by targeted analyses, we obtained direct evidence for a proton-driven SAM/SAH antiport mechanism. Sequence analyses suggest that SAM carriers from Rickettsiales might operate in a similar way, in contrast to chlamydial SAM transporters. SAM/SAH antiport is of high physiological importance, as it allows for compensation for the missing methylation cycle. The identification of a SAM transporter in A. asiaticus belonging to the Bacteroidetes phylum demonstrates that SAM transport is more widely spread than previously assumed and occurs in bacteria belonging to three different phyla (Proteobacteria, Chlamydiae, and Bacteroidetes).

Development of bacteriostatic DNA aptamers for salmonella

Salmonella is one of the most dangerous and common food-borne pathogens. The overuse of antibiotics for disease prevention has led to the development of multidrug resistant Salmonella. Now, more than ever, there is a need for new antimicrobial drugs to combat these resistant bacteria. Aptamers have grown in popularity since their discovery, and their properties make them attractive candidates for therapeutic use. In this work, we describe the selection of highly specific DNA aptamers to S. enteritidis and S. typhimurium. To evolve species-specific aptamers, twelve rounds of selection to live S. enteritidis and S. typhimurium were performed, alternating with a negative selection against a mixture of related pathogens. Studies have shown that synthetic pools combined from individual aptamers have the capacity to inhibit growth of S. enteritidis and S. typhimurium in bacterial cultures; this was the result of a decrease in their membrane potential.

Effect of pluronic acid F-127 on the toxicity towards eukaryotic cells of CSA-13, a cationic steroid analogue of antimicrobial peptides

AIMS

CSA-13 is an antimicrobial cationic steroid with some toxicity against eukaryotic cells. The purpose of this work was to test whether pluronic acid F-127 could interfere with the toxicity of CSA-13 on human umbilical vein endothelial (HUVEC) without modifying its bactericidal activity against Pseudomonas aeruginosa.

METHODS AND RESULTS

The addition of pluronic acid F-127 slightly decreased the number of dead cells after exposure to CSA-13. Pluronic acid F-127 blocked the permeabilizing effect of CSA-13 on the plasma membrane of HUVEC (uptake of ethidium bromide, release of lactate dehydrogenase) without modifying its toxic effect on their mitochondrial function (MTT test, uptake of tetramethyl rhodamine ethyl ester).

CONCLUSION

Pluronic acid F-127 decreased the toxicity of CSA-13 against eukaryotic cells without completely protecting them from mitochondrial damage at high concentrations of the drug.

SIGNIFICANCE AND IMPACT OF THE STUDY

This work establishes that studies on the toxic effects of synthetic antimicrobials on eukaryotic cells should not only focus on the permeability of the plasma membrane but also on the integrity of the mitochondria.

Use of 5-cyano-2,3-ditolyl-tetrazolium chloride staining as an indicator of biocidal activity in a rapid assay for anti-Acanthamoeba agents

The usefulness of 5-cyano-2,3-ditolyl-tetrazolium chloride (CTC) staining to determine the respiratory activity of Acanthamoeba was evaluated in this study. Acanthamoeba trophozoites and cysts have a red fluorescence after staining with CTC. To determine the effectiveness of CTC staining as a CTC biocidal assay for Acanthamoeba, the trophozoites and cysts of Acanthamoeba castellanii (ATCC 5037) were treated with serial concentrations of disinfectant solutions, namely, polyhexamethylene biguanide (PHMB) and commercial soft contact lens (SCL) disinfectant solutions. The treated Acanthamoeba organisms were stained with CTC, and their respiratory activity was determined by the intensity of fluorescence in a fluorescence microplate reader. The survival rates of the same samples were determined by a culture-dependent biocidal assay using the Spearman-Karber method. Our results showed that the respiratory activities determined by the CTC biocidal assay and the survival rates determined by the culture-dependent biocidal assay for Acanthamoeba trophozoites and cysts decreased in a dose-dependent way after PHMB treatments, and the results were significantly correlated (r = 0.83 and P < 0.01 for trophozoites; r = 0.60 and P < 0.01 for cysts; Spearman rank correlation test). The respiratory activities in the trophozoites and cysts treated with SCL disinfectant solutions were significantly correlated with the survival rate (r = 0.70 and P < 0.01 for trophozoites; r = 0.64 and P < 0.01 for cysts; Spearman rank correlation test). The significant correlation of the results indicated that the CTC biocidal assay can be used as an alternative method to a culture-dependent biocidal assay. The CTC biocidal assay is a rapid and simple method to test the effectiveness of disinfectant solutions against Acanthamoeba trophozoites and cysts.

Effect of modeled reduced gravity conditions on bacterial morphology and physiology

BACKGROUND

Bacterial phenotypes result from responses to environmental conditions under which these organisms grow; reduced gravity has been demonstrated in many studies as an environmental condition that profoundly influences microorganisms. In this study, we focused on low-shear stress, modeled reduced gravity (MRG) conditions and examined, for Escherichia coli and Staphlyococcus aureus, a suite of bacterial responses (including total protein concentrations, biovolume, membrane potential and membrane integrity) in rich and dilute media and at exponential and stationary phases for growth. The parameters selected have not been studied in E. coli and S. aureus under MRG conditions and provide critical information about bacterial viability and potential for population growth.

RESULTS

With the exception of S. aureus in dilute Luria Bertani (LB) broth, specific growth rates (based on optical density) of the bacteria were not significantly different between normal gravity (NG) and MRG conditions. However, significantly higher bacterial yields were observed for both bacteria under MRG than NG, irrespective of the medium with the exception of E. coli grown in LB. Also, enumeration of cells after staining with 4',6-diamidino-2-phenylindole showed that significantly higher numbers were achieved under MRG conditions during stationary phase for E. coli and S. aureus grown in M9 and dilute LB, respectively. In addition, with the exception of smaller S. aureus volume under MRG conditions at exponential phase in dilute LB, biovolume and protein concentrations per cell did not significantly differ between MRG and NG treatments. Both E. coli and S. aureus had higher average membrane potential and integrity under MRG than NG conditions; however, these responses varied with growth medium and growth phase.

CONCLUSIONS

Overall, our data provides novel information about E. coli and S. aureus membrane potential and integrity and suggest that bacteria are physiologically more active and a larger percentage are viable under MRG as compared to NG conditions. In addition, these results demonstrate that bacterial physiological responses to MRG conditions vary with growth medium and growth phase demonstrating that nutrient resources are a modulator of response.

A microfluidic device for bacteria detection in aqueous samples

We demonstrate the use of a microfluidic device that accurately monitors bacteria levels in water. Fluorescent antibody labelled E. coli K12 bacteria in aqueous samples are flowed through the device, and spikes in the emission signal correspond to the presence of bacteria. Target bacteria could also be detected while suspended in a suspension of very low antibody concentration, suggesting that washing of bacteria could be avoided to make the detection automated and more rapid. Use of a microfluidic device will eventually enable quick on-site detection of bacteria using small quantities of sample.

Antistaphylococcal and biofilm inhibitory activities of acetyl-11-keto-β-boswellic acid from Boswellia serrata

Background

Boswellic acids are pentacyclic triterpenes, which are produced in plants belonging to the genus Boswellia. Boswellic acids appear in the resin exudates of the plant and it makes up 25-35% of the resin. β-boswellic acid, 11-keto-β-boswellic acid and acetyl-11-keto-β-boswellic acid have been implicated in apoptosis of cancer cells, particularly that of brain tumors and cells affected by leukemia or colon cancer. These molecules are also associated with potent antimicrobial activities. The present study describes the antimicrobial activities of boswellic acid molecules against 112 pathogenic bacterial isolates including ATCC strains. Acetyl-11-keto-β-boswellic acid (AKBA), which exhibited the most potent antibacterial activity, was further evaluated in time kill studies, postantibiotic effect (PAE) and biofilm susceptibility assay. The mechanism of action of AKBA was investigated by propidium iodide uptake, leakage of 260 and 280 nm absorbing material assays.

Results

AKBA was found to be the most active compound showing an MIC range of 2-8 μg/ml against the entire gram positive bacterial pathogens tested. It exhibited concentration dependent killing of Staphylococcus aureus ATCC 29213 up to 8 × MIC and also demonstrated postantibiotic effect (PAE) of 4.8 h at 2 × MIC. Furthermore, AKBA inhibited the formation of biofilms generated by S. aureus and Staphylococcus epidermidis and also reduced the preformed biofilms by these bacteria. Increased uptake of propidium iodide and leakage of 260 and 280 nm absorbing material by AKBA treated cells of S aureus indicating that the antibacterial mode of action of AKBA probably occurred via disruption of microbial membrane structure.

Conclusions

This study supported the potential use of AKBA in treating S. aureus infections. AKBA can be further exploited to evolve potential lead compounds in the discovery of new anti-Gram-positive and anti-biofilm agents.

Visualization of adherent micro-organisms using different techniques

The visualization and quantification of adherent bacteria is still one of the most relevant topics in microbiology. Besides electron microscopic techniques such as transmission electron microscopy, scanning electron microscopy and environmental scanning electron microscopy, modern fluorescence microscopic approaches based on fluorogenic dyes offer detailed insight into bacterial biofilms. The aim of the present review was to provide an overview of the advantages and disadvantages of different methods for visualization of adherent bacteria with a special focus on the experiences gained in dental research.

An efficient method for enumerating oral spirochetes using flow cytometry

Spirochetes, such as Treponema denticola, are thin walled, helical, motile bacteria. They are notoriously difficult to enumerate due to their thinness and the difficulties associated with culturing them. Here we have developed a modified oral bacterial growth medium (OBGM) that significantly improves the cultivation of T. denticola compared with a previously published growth medium. Three methods for the enumeration of T. denticola, semi-solid growth medium colony-forming unit (CFU) counts, DNA analysis and flow cytometry, are described and compared. Enumeration of T. denticola using the semi-solid agar method resulted in a positive linear relationship with absorbance of the culture (R(2)=0.9423). However, the semi-solid agar method was found to consistently underestimate (by 50 fold) the T. denticola cell density compared to previously published data. DNA analysis of T. denticola cultures reliably and consistently resulted in a positive linear relationship with absorbance (R(2)=0.9360), giving a calculated cell density of 6.9 x 10(8)cells/mL at an absorbance of 0.2 at 650 nm. Flow cytometry was also found to result in a positive linear relationship with absorbance (R(2)=0.9874), giving a calculated cell density of 6.6 x 10(8)cells/mL at an absorbance of 0.2 at 650 nm. In comparing all of these enumeration methods, the flow cytometry method was found to have distinct advantages, as it is accurate, rapid, and could distinguish between live and dead bacteria. Thus flow cytometry is a recommended means for the rapid and reliable enumeration of viable spirochetes from culture.

Responses of lake bacterioplankton activities and composition to the herbicide diuron

The direct effects of pesticides on aquatic bacteria are poorly known. We experimentally investigated the direct effects of diuron (herbicide) on the composition and activities of lake bacterioplankton, using Denaturing Gradient Gel Electrophoresis (DGGE), cloning/sequencing, and flow cytometry with dyes that allow detection of dead cells, cells with depolarized membranes and cells with esterase activity (for physiological state). Generally, diuron had negative impacts on bacterial viability and abundance. Bacterial production strongly correlated with ammonium in controls, but not in diuron-treated samples. Moreover the increase in nitrate concentration with the proportion of dead bacteria was significantly higher in controls, providing evidence not previously shown for natural communities, that diuron may alter the mineralization of organic matter and nitrification. A picocyanobacteria and members of the family Flavobacteriaceae, known to degrade complex polymeric organic matter in aquatic systems were negatively affected by diuron. Except that, the DGGE banding patterns in controls and in polluted samples were generally similar, suggesting no perceptible susceptibility of major bacterial groups, and contrasting with previous reports that diuron has a strong impact on bacterial community composition. Our data suggest that diuron may affect functioning of aquatic systems through negative impacts on some bacterial phylotypes and bacterial cycling of nitrogen.

Estimation of microbial viability using flow cytometry

For microorganisms in particular, viability is a term that is difficult to define and a state consequently difficult to measure. The traditional (and gold-standard) usage equates viability and culturability (i.e., the ability to multiply), but the process of determining culturability is often too slow. Flow cytometry provides the opportunity to make rapid and quantitative measurements of dye uptake in large numbers of cells, and we can therefore exploit the flow cytometric approach to evaluate so-called viability stains and to develop protocols for more routine assessments of microbial viability. This unit is primarily commentary, but several basic protocols have been included to ensure that users have a firm basis for attempting these reasonably difficult assays on traditional flow cytometer instruments. What is clear is that each assay must be carefully validated with the particular microorganism of interest before being applied in any research, clinical, or service form.

Estimation of membrane potential by flow cytometry

In most living cells, differences between interior and exterior concentrations of ions (e.g., Na(+), K(+), Cl(-)) generate an electrical potential across the cytoplasmic membrane. Membrane potential, like other cellular parameters, may change early in the course of surface receptor-mediated cell activation processes related to the development, differentiated function, and pathology of a large number of cell types. Changes in ionic environment may play a role in transmembrane signaling in response to cell surface ligand-receptor interactions. Thus, it is frequently of scientific interest to estimate membrane potential in individual cells. This unit provides methods for accomplishing this goal by flow or static cytometry using any of a number of cationic or anionic lipophilic fluorescent probes known as distributional dyes. The first of the two protocols is able to estimate the membrane potential of eukaryotic or bacterial cells. The second is more accurate, but can only be used with bacteria.