Impact of nutrient composition on a degradative biofilm community

Visualizing biofilm by targeting eDNA with long wavelength probe CDr15

We developed a small molecule CDr15, which has eDNA selectivity of bacterial biofilm.

Gene expression and protein synthesis of esterase from Streptococcus mutans are affected by biodegradation by-product from methacrylate resin composites and adhesives

An esterase from S. mutans UA159, SMU_118c, was shown to hydrolyze methacrylate resin-based dental monomers.

OBJECTIVE

To investigate the association of SMU_118c to the whole cellular hydrolytic activity of S. mutans toward polymerized resin composites, and to examine how the bacterium adapts its hydrolytic activity in response to environmental stresses triggered by the presence of a resin composites and adhesives biodegradation by-product (BBP).

MATERIALS AND METHODS

Biofilms of S. mutans UA159 parent wild strain, SMU_118c knockout strain (ΔSMU_118c), and SMU_118c complemented strain (ΔSMU_118cC) were incubated with photo-polymerized resin composite. High performance liquid chromatography was used to quantify the amount of a universal 2,2-Bis[4-(2-hydroxy-3-methacryloxypropoxy)phenyl]propane (bisGMA)-derived BBP, bishydroxy-propoxy-phenyl-propane (bisHPPP) in the media. Fluorescence in situ hybridization (FISH) and quantitative proteomic analysis were used to measure SMU_118c gene expression and production of SMU_118c protein, respectively, from biofilms of S. mutans UA159 wild strain that were cultured with bisHPPP.

RESULTS

The levels of bisHPPP released from composite were similar for ΔSMU_118c and media control, and these were significantly lower compared to the parent wild-strain UA159 and complemented strain (ΔSMU_118cC) (p < 0.05). Gene expression of SMU_118c and productions of SMU_118c protein were higher for bisHPPP incubated biofilms (p < 0.05).

SIGNIFICANCE

This study suggests that SMU_118c is a dominant esterase in S. mutans and capable of catalyzing the hydrolysis of the resinous matrix of polymerized composites and adhesives. In turn, the bacterial response to BBP was to increase the expression of the esterase gene and enhance esterase production, potentially accelerating the biodegradation of the restoration, adhesive and restoration-tooth interface, ultimately contributing to premature restoration failure.

STATEMENT OF SIGNIFICANCE

We recently reported (Huang et al., 2018) on the isolation and initial characterization of a specific esterase (SMU_118c) from S. mutans that show degradative activity toward the hydrolysis of dental monomers. The current study further characterize this enzyme and shows that SMU_118c is a dominant degradative esterase activity in the cariogenic bacterium S. mutans and is capable of catalyzing the hydrolysis of the resinous matrix of polymerized composites and adhesives. In turn, the bacterial response to biodegradation by-products from composites and adhesives was to increase the expression of the esterase gene and enhance esterase production, accelerating the biodegradation of the restoration, adhesive and the restoration-tooth interface, potentially contributing to the pathogenesis of recurrent caries around resin composite restorations.

Experimental and Computational Investigation of Biofilm Formation by Rhodopseudomonas palustris Growth under Two Metabolic Modes

We examined biofilms formed by the metabolically versatile bacterium Rhodopseudomonas palustris grown via different metabolic modes. R. palustris was grown in flow cell chambers with identical medium conditions either in the presence or absence of light and oxygen. In the absence of oxygen and the presence of light, R. palustris grew and formed biofilms photoheterotrophically, and in the presence of oxygen and the absence of light, R. palustris grew and formed biofilms heterotrophically. We used confocal laser scanning microscopy and image analysis software to quantitatively analyze and compare R. palustris biofilm formation over time in these two metabolic modes. We describe quantifiable differences in structure between the biofilms formed by the bacterium grown heterotrophically and those grown photoheterotrophically. We developed a computational model to explore ways in which biotic and abiotic parameters could drive the observed biofilm architectures, as well as a random-forest machine-learning algorithm based on structural differences that was able to identify growth conditions from the confocal imaging of the biofilms with 87% accuracy. Insight into the structure of phototrophic biofilms and conditions that influence biofilm formation is relevant for understanding the generation of biofilm structures with different properties, and for optimizing applications with phototrophic bacteria growing in the biofilm state.

Carbon sources influence the nitrate removal activity, community structure and biofilm architecture

Influence of the frequently used carbon sources in nitrate removal processes were evaluated in a lab-scale biofilm reactor. The NO3-N removal efficiency was in the order acetate>glucose>methanol>ethanol. Acetate-fed biofilm reduced nearly 100% NO3-N with negligible amount of NO2-N accumulation. Although 99% NO3-N was reduced in the glucose-fed biofilm, substantial NH3-N and NO2-N accumulated. Methanol-fed biofilm reduced 72% of NO3-N with accumulation of 2.2 mg L(-1) of NO2-N, while biofilm formed in presence of ethanol showed 61% reduction in NO3-N although relatively higher ratio of denitrifiers were observed. Acetate and ethanol-fed biofilm displayed characteristic biofilm architecture with voids, but the former had relatively higher thickness and diffusion distance. In presence of glucose and methanol, a confluent biofilm without characteristic voids was formed. Pseudomonas sp. numerically dominated the acetate and ethanol-fed biofilm, while Enterobacter sp. and Methylobacillus sp., were abundant in glucose and methanol biofilms respectively.

Carbon load in aquatic ecosystems affects the diversity and biomass of water biofilm consortia and the persistence of the pathogen Campylobacter jejuni within them

The influence of carbon load on autochthonous water microflora population distribution and diversity, and on the persistence of Campylobacter jejuni, was examined with a two-stage aquatic biofilm model. Serine was chosen since it is a carbon source utilised by C. jejuni and concentrations were chosen to reflect upper limits of amino acid load reported in surface water. The total viable count of the autochthonous biofilm microflora increased with increasing serine concentration (10-fold and 20-fold with 5 nM and 5 μM serine, respectively), as did the counts of the microflora in the planktonic phase. Differences in biofilm species distribution as determined by culture were small with changes in temperature or the addition of serine; but was markedly affected by serine as determined by light microscopy, becoming more luxuriant and dominated by long filamentous cells. The addition of serine to the water significantly and progressively reduced the persistence of C. jejuni, which decreased by 25% and 50% with serine concentrations of 5 nM and 5 μM respectively. We have demonstrated that carbon load affects the species diversity and density of both the planktonic and biofilm phase of aquatic autochthonous microflora. Although the survival of C. jejuni in water in a culturable form was sufficient for this to be an important vehicle for its transmission, carbon load significantly influenced survival; an increase in serine concentration significantly reduced survival.

Nutrients determine the spatial architecture of Paracoccus sp. biofilm

Bacterial biofilms adapt and shape their structure in response to varied environmental conditions. A statistical methodology was adopted in this study to empirically investigate the influence of nutrients on biofilm structural parameters deduced from confocal scanning laser microscope images of Paracoccus sp.W1b, a denitrifying bacterium. High concentrations of succinate, Mg(++), Ca(++), and Mn(++) were shown to enhance biofilm formation whereas higher concentration of iron decreased biofilm formation. Biofilm formed at high succinate was uneven with high surface to biovolume ratio. Higher Mg(++) or Ca(++) concentrations induced cohesion of biofilm cells, but contrasting biofilm architectures were detected. Biofilm with subpopulation of pillar-like protruding cells was distributed on a mosaic form of monolayer cells in medium with 10 mM Mg(++). 10 mM Ca(++) induced a dense confluent biofilm. Denitrification activity was significantly increased in the Mg(++)- and Ca(++)-induced biofilms. Chelator treatment of various biofilm ages indicated that divalent cations are important in the initial stages of biofilm formation.

Biofilm formation in environmental bacteria is influenced by different macromolecules depending on genus and species

The formation of biofilms by diverse bacteria isolated from contaminated soil and groundwater on model substrata with different surface properties was assessed in a multifactorial screen. Diverse attachment phenotypes were observed as measured by crystal violet dye retention and confocal laser scanning microscopy (CLSM). Bulk measurements of cell hydrophobicity had little predictive ability in determining whether biofilms would develop on hydrophobic or hydrophilic substrata. Therefore selected pairs of bacteria from the genera Rhodococcus, Pseudomonas and Sphingomonas that exhibited different attachment phenotypes were examined in more detail using CLSM and the lipophilic dye, Nile Red. The association of Rhodococcus sp. cell membranes with lipids was shown to influence the attachment properties of these cells, but this approach was not informative for Pseudomonas and Sphingomonas sp. Confocal Raman Microspectroscopy of Rhodococcus biofilms confirmed the importance of lipids in their formation and indicated that in Pseudomonas and Sphingomonas biofilms, nucleic acids and proteins, respectively, were important in identifying the differences in attachment phenotypes of the selected strains. Treatment of biofilms with DNase I confirmed a determining role for nucleic acids as predicted for Pseudomonas. This work demonstrates that the attachment phenotypes of microbes from environmental samples to different substrata varies markedly, a diverse range of macromolecules may be involved and that these differ significantly between genera. A combination of CLSM and Raman spectroscopy distinguished between phenotypes and could be used to identify the key macromolecules involved in cell attachment to surfaces for the specific cases studied.

Visualization of adherent micro-organisms using different techniques

The visualization and quantification of adherent bacteria is still one of the most relevant topics in microbiology. Besides electron microscopic techniques such as transmission electron microscopy, scanning electron microscopy and environmental scanning electron microscopy, modern fluorescence microscopic approaches based on fluorogenic dyes offer detailed insight into bacterial biofilms. The aim of the present review was to provide an overview of the advantages and disadvantages of different methods for visualization of adherent bacteria with a special focus on the experiences gained in dental research.

Architecture and spatial organization in a triple-species bacterial biofilm synergistically degrading the phenylurea herbicide linuron

Members of a triple-species 3-(3,4-dichlorophenyl)-1-methoxy-1-methyl urea (linuron)-mineralizing consortium, i.e. the linuron- and 3,4-dichloroaniline-degrading Variovorax sp. WDL1, the 3,4-dichloroaniline-degrading Comamonas testosteroni WDL7 and the N,O-dimethylhydroxylamine-degrading Hyphomicrobium sulfonivorans WDL6, were cultivated as mono- or multi-species biofilms in flow cells irrigated with selective or nonselective media, and examined with confocal laser scanning microscopy. In contrast to mono-species biofilms of Variovorax sp. WDL1, the triple-species consortium biofilm degraded linuron completely through apparent synergistic interactions. The triple-species linuron-fed consortium biofilm displayed a heterogeneous structure with an irregular surface topography that most resembled the topography of linuron-fed mono-species WDL1 biofilms, indicating that WDL1 had a dominating influence on the triple-species biofilm architecture. This architecture was dependent on the carbon source supplied, as the biofilm architecture of WDL1 growing on alternative carbon sources was different from that observed under linuron-fed conditions. Linuron-fed triple-species consortium biofilms consisted of mounds composed of closely associated WDL1, WDL7 and WDL6 cells, while this association was lost when the consortium was grown on a nonselective carbon source. In addition, under linuron-fed conditions, microcolonies displaying associated growth developed rapidly after inoculation. These observations indicate that the spatial organization in the linuron-fed consortium biofilm reflected the metabolic interactions within the consortium.

Influence of magnesium ions on biofilm formation by Pseudomonas fluorescens

Mg(2+) can potentially influence bacterial adhesion directly through effects on electrostatic interactions and indirectly by affecting physiology-dependent attachment processes. However, the effects of Mg(2+) on biofilm structure are largely unknown. In this study, Pseudomonas fluorescens was used to investigate the influence of Mg(2+) concentration (0, 0.1 and 1.0mM MgCl(2)) on biofilm growth. Planktonic and attached cells were enumerated (based on DAPI staining) while biofilm structures were examined via confocal laser scanning microscopy and three-dimensional structures were reconstructed. Mg(2+) concentration had no influence on growth of planktonic cells but, during biofilm formation, Mg(2+) increased the abundance of attached cells. For attached cells, the influence of Mg(2+) concentration changed over time, suggesting that the role of Mg(2+) in bacterial attachment is complex and dynamic. Biofilm structures were heterogeneous and surface colonization and depth increased with increasing Mg(2+) concentrations. Overall, for P. fluorescens, Mg(2+) increased initial attachment and altered subsequent biofilm formation and structure.

Capture and retention of Cryptosporidium parvum oocysts by Pseudomonas aeruginosa biofilms

The association of Cryptosporidium oocysts with biofilm communities can influence the propagation of this pathogen through both environmental systems and water treatment systems. We observed the capture and retention of C. parvum oocysts in Pseudomonas aeruginosa biofilms using laboratory flow cells. Biofilms were developed in two different growth media using two different strains of P. aeruginosa, a wild-type strain (PAO1) and a strain that overproduces the exopolysaccharide alginate (PDO300). Confocal laser-scanning microscopy was used in conjunction with image analysis to assess the structure of the biofilms prior to introducing oocysts into the flow cells. More oocysts were captured by the biofilm-coated surfaces than the abiotic glass surface in both media. There was no significant difference in capture across the two strains of P. aeruginosa biofilm, but the fraction of oocysts captured was positively related to biofilm roughness and surface-area-to-volume ratio. Once captured, oocysts were retained in the biofilm for more than 24 h and were not released after a 40-fold increase in the system flow rate. We believe the capture and retention of oocysts by biofilm communities can impact the environmental transmission of C. parvum, and this interaction should be taken into consideration when predicting the migration of pathogens in the environment.

Effect of substrate concentration on dual-species biofilm population densities of Klebsiella oxytoca and Burkholderia cepacia in porous media

The long-term operation of bioremediation technologies relies on the success of the contaminant-degrading microorganism(s) to compete for available resources with microorganisms already present in an aquifer or those that may contaminate a bioreactor. Though research has been performed studying the interaction of multiple species in batch and chemostat reactors, little work has been done looking at multi-species interactions in environments that more closely resemble field-scale applications. The research presented herein examined the interaction of Burkholderia cepacia PR1-pTOM(31c), an aerobic trichloroethylene (TCE)-degrading bacterium, with Klebsiella oxytoca, a facultative bacterium, in a flow-through porous media (PM) reactor. Growth characteristics and population distributions in PM were compared to previously reported values from batch and chemostat reactors. The faster growing organism in batch experiments (K. oxytoca) did not always have the greater population density in dual-species PM experiments. The biofilm population distribution was influenced by substrate concentration, with B. cepacia having a greater dual-species population density than K. oxytoca at a low (30 mg/L dissolved organic carbon [DOC]) substrate concentration and K. oxytoca having a greater population density at a high (700 mg/L DOC) substrate concentration. This change in species population distribution with change in substrate concentration, which was not observed in batch reactors, was also observed in chemostat reactors. Therefore, manipulation of substrate concentration enabled the control of species dominance to the advantage of the TCE degrading population in this dual-species PM system and may provide a mechanism to enhance bioremediation scenarios involving TCE or other contaminants of concern.

A soil-based microbial biofilm exposed to 2,4-D: bacterial community development and establishment of conjugative plasmid pJP4

A soil suspension was used as a source to initiate the development of microbial communities in flow cells irrigated with 2,4-dichlorophenoxyacetic acid (2,4-D) (25 microg ml(-1)). Culturable bacterial members of the community were identified by 16S rRNA gene sequencing and found to be members of the genera Pseudomonas, Burkholderia, Collimonas and Rhodococcus. A 2,4-D degrading donor strain, Pseudomonas putida SM1443 (pJP4::gfp), was inoculated into flow cell chambers containing 2-day old biofilm communities. Transfer of pJP4::gfp from the donor to the bacterial community was detectable as GFP fluorescing cells and images were captured using confocal scanning laser microscopy (GFP fluorescence was repressed in the donor due to the presence of a chromosomally located lacI(q) repressor gene). Approximately 5-10 transconjugant microcolonies, 20-40 microm in diameter, could be seen to develop in each chamber. A 2,4-D degrading transconjugant strain was isolated from the flow cell system belonging to the genus Burkholderia.

Interaction of Klebsiella oxytoca and Burkholderia cepacia in dual-species batch cultures and biofilms as a function of growth rate and substrate concentration

Dual-species microbial interactions have been extensively reported for batch and continuous culture environments. However, little research has been performed on dual-species interaction in a biofilm. This research examined the effects of growth rate and substrate concentration on dual-species population densities in batch and biofilm reactors. In addition, the feasibility of using batch reactor kinetics to describe dual-species biofilm interactions was explored. The scope of the research was directed toward creating a dual-species biofilm for the biodegradation of trichloroethylene, but the findings are a significant contribution to the study of dual-species interactions in general. The two bacterial species used were Burkholderia cepacia PR1-pTOM(31c), an aerobic organism capable of constitutively mineralizing trichloroethylene (TCE), and Klebsiella oxytoca, a highly mucoid, facultative anaerobic organism. The substrate concentrations used were different dilutions of a nutrient-rich medium resulting in dissolved organic carbon (DOC) concentrations on the order of 30, 70, and 700 mg/L. Presented herein are single- and dual-species population densities and growth rates for these two organisms grown in batch and continuous-flow biofilm reactors. In batch reactors, planktonic growth rates predicted dual-species planktonic species dominance, with the faster-growing organism (K. oxytoca) outcompeting the slower-growing organism (B. cepacia). In a dual-species biofilm, however, dual-species planktonic growth rates did not predict which organism would have the higher dual-species biofilm population density. The relative fraction of each organism in a dual-species biofilm did correlate with substrate concentration, with B. cepacia having a greater proportional density in the dual-species culture with K. oxytoca at low (30 and 70 mg/L DOC) substrate concentrations and K. oxytoca having a greater dual-species population density at a high (700 mg/L DOC) substrate concentration. Results from this research demonstrate the effectiveness of using substrate concentration to control population density in this dual-species biofilm.

Temperature step changes: a novel approach to control biofilms of Streptococcus thermophilus in a pilot plant-scale cheese-milk pasteurisation plant

A pilot plant-scale cheese-milk pasteurisation plant was designed and constructed to study the development of biofilms of Streptococcus thermophilus during pasteurisation of milk, and to investigate methods for preventing this growth from occurring. Under base run conditions, S. thermophilus grew on surfaces in the cool-down sections of the pilot plant, between 50 and 35 degrees C (bulk milk temperature), and could be detected in the product stream after 8-10 h production, reaching levels of 10(6) CFU ml-1 after 16 h. Thermoduric bacteria also grew in the heating sections of the pilot plant, although to a lesser extent, as did non-thermoduric bacteria that originated in the raw milk. The novel application of temperature step changes, implemented periodically to the growth region of S. thermophilus, successfully controlled the development of biofilms of these organisms. The growth of bacteria on the heating side of the pilot plant was also prevented by the implementation of these same step changes. The optimum step change conditions required to achieve a 20-h production run without detectable growth of S. thermophilus comprised a step change to 55 degrees C, applied for 10 min, with a 60-min interval between step changes.

Dynamics of living and dead bacterial cells within a mixed-species biofilm during toluene degradation in a biotrickling filter

AIMS

To study the accumulation of the bacterial living cells (LC) and dead cells (DC) in a mixed-species biofilm developed in a 3 l biotrickling filter (BTF) challenged with toluene.

METHODS AND RESULTS

The bacterial LC and DC within the biofilm developed on polypropylene Pall rings in a toluene-degrading BTF were enumerated as fluoro-microscopic counts during a 62-operating day period using nucleic acid staining and the direct epifluorescence filter technique. The biofilm development could be separated into three distinct phases: (i) cell attachment, (ii) biofilm establishment and (iii) biofilm maturation. The LC were always dominant (>/=72%) in the biofilm during the establishment phase whereas the average LC fraction decreased to 51% of the total cells in the maturation phase. The concentration of LC and DC was observed to level off after 41 days at 1010 cells per ring. The biofilm thickness and the dry weight increased independently of the cell number during the maturation phase.

CONCLUSIONS

After the LC reached a maximum concentration in the biofilm, the biofilm proliferation was only characterized by the accumulation of DC and organic matter.

SIGNIFICANCE AND IMPACT OF THE STUDY

The results obtained in the present study are of particular relevance for biofilm mathematical modelling and numerical simulations. They will also be useful to estimate the contribution of the living bacteria within the biofilm in bioprocesses.

Metabolic commensalism and competition in a two-species microbial consortium

We analyzed metabolic interactions and the importance of specific structural relationships in a benzyl alcohol-degrading microbial consortium comprising two species, Pseudomonas putida strain R1 and Acinetobacter strain C6, both of which are able to utilize benzyl alcohol as their sole carbon and energy source. The organisms were grown either as surface-attached organisms (biofilms) in flow chambers or as suspended cultures in chemostats. The numbers of CFU of P. putida R1 and Acinetobacter strain C6 were determined in chemostats and from the effluents of the flow chambers. When the two species were grown together in chemostats with limiting concentrations of benzyl alcohol, Acinetobacter strain C6 outnumbered P. putida R1 (500:1), whereas under similar growth conditions in biofilms, P. putida R1 was present in higher numbers than Acinetobacter strain C6 (5:1). In order to explain this difference, investigations of microbial activities and structural relationships were carried out in the biofilms. Insertion into P. putida R1 of a fusion between the growth rate-regulated rRNA promoter rrnBP1 and a gfp gene encoding an unstable variant of the green fluorescent protein made it possible to monitor the physiological activity of P. putida R1 cells at different positions in the biofilms. Combining this with fluorescent in situ hybridization and scanning confocal laser microscopy showed that the two organisms compete or display commensal interactions depending on their relative physical positioning in the biofilm. In the initial phase of biofilm development, the growth activity of P. putida R1 was shown to be higher near microcolonies of Acinetobacter strain C6. High-pressure liquid chromatography analysis showed that in the effluent of the Acinetobacter strain C6 monoculture biofilm the metabolic intermediate benzoate accumulated, whereas in the biculture biofilms this was not the case, suggesting that in these biofilms the excess benzoate produced by Acinetobacter strain C6 leaks into the surrounding environment, from where it is metabolized by P. putida R1. After a few days, Acinetobacter strain C6 colonies were overgrown by P. putida R1 cells and new structures developed, in which microcolonies of Acinetobacter strain C6 cells were established in the upper layer of the biofilm. In this way the two organisms developed structural relationships allowing Acinetobacter strain C6 to be close to the bulk liquid with high concentrations of benzyl alcohol and allowing P. putida R1 to benefit from the benzoate leaking from Acinetobacter strain C6. We conclude that in chemostats, where the organisms cannot establish in fixed positions, the two strains will compete for the primary carbon source, benzyl alcohol, which apparently gives Acinetobacter strain C6 a growth advantage, probably because it converts benzyl alcohol to benzoate with a higher yield per time unit than P. putida R1. In biofilms, however, the organisms establish structured, surface-attached consortia, in which heterogeneous ecological niches develop, and under these conditions competition for the primary carbon source is not the only determinant of biomass and population structure.

Enrichment versus biofilm culture: a functional and phylogenetic comparison of polycyclic aromatic hydrocarbon-degrading microbial communities

The effect that culture methods have on the diversity of degradative microbial communities is not well understood. We compared conventional batch enrichment with a biofilm culture method for the isolation of polycyclic aromatic hydrocarbon (PAH)-degrading microbial communities from a PAH-contaminated soil. The two methods were assessed by comparing: (i) the diversity of culturable bacteria; (ii) the diversity of PAH-catabolic genes in isolated bacteria; (iii) the inter- and intraspecific diversity of active PAH-catabolic gene classes; (iv) the diversity of bacteria present in 16S rRNA gene libraries generated from RNA extracted from the two communities and soil; and (v) the estimated diversity of active bacteria in the soil and culture systems. Single-strand conformation polymorphism analysis showed that the biofilm culture yielded 36 bacterial and two fungal species compared with 12 bacterial species from the enrichment culture. Application of accumulation and non-parametric estimators to clone libraries generated from 16S rRNA confirmed that the biofilm community contained greater diversity. Sequencing of clones showed that only species from the Proteobacteria were active in the enrichment culture, and that these species were expressing an identical nahAc-like naphthalene dioxygenase. 16S rRNA clones generated from the biofilm community indicated that species from the Cytophaga/Flavobacterium, high G+C bacteria and Proteobacteria were active at the time of sampling, expressing cndA-, nahAc- and phnAc-like naphthalene dioxygenases. The diversity of active species in the biofilm culture system closely matched that in the PAH-contaminated source soil. The results of this study showed that biofilm culture methods are more appropriate for the study of community-level interactions in PAH-degrading microbial communities. The study also indicated that cultivation of microbial communities on solid media might be the primary source of bias in the recovery of diverse species.

Mutualism versus independence: strategies of mixed-species oral biofilms in vitro using saliva as the sole nutrient source

During initial dental plaque formation, the ability of a species to grow when others cannot would be advantageous, and enhanced growth through interspecies and intergeneric cooperation could be critical. These characteristics were investigated in three coaggregating early colonizers of the tooth surface (Streptococcus gordonii DL1, Streptococcus oralis 34, and Actinomyces naeslundii T14V). Area coverage and cell cluster size measurements showed that attachment of A. naeslundii and of S. gordonii to glass flowcells was enhanced by a salivary conditioning film, whereas attachment of S. oralis was hindered. Growth experiments using saliva as the sole carbon and nitrogen source showed that A. naeslundii was unable to grow either in planktonic culture or as a biofilm, whereas S. gordonii grew under both conditions. S. oralis grew planktonically, but to a much lower maximum cell density than did S. gordonii; S. oralis did not grow reproducibly as a biofilm. Thus, only S. gordonii possessed all traits advantageous for growth as a solitary and independent resident of the tooth. Two-species biofilm experiments analyzed by laser confocal microscopy showed that neither S. oralis nor A. naeslundii grew when coaggregated pairwise with S. gordonii. However, both S. oralis and A. naeslundii showed luxuriant, interdigitated growth when paired together in coaggregated microcolonies. Thus, the S. oralis-A. naeslundii pair formed a mutualistic relationship, potentially contact dependent, that allows each to grow where neither could survive alone. S. gordonii, in contrast, neither was hindered by nor benefited from the presence of either of the other strains. The formation of mutually beneficial interactions within the developing biofilm may be essential for certain initial colonizers to be retained during early plaque development, whereas other initial colonizers may be unaffected by neighboring cells on the substratum.

Quantification of biofilm structures by the novel computer program COMSTAT

The structural organization of four microbial communities was analysed by a novel computer program, COMSTAT, which comprises ten features for quantifying three-dimensional biofilm image stacks. Monospecies biofilms of each of the four bacteria, Pseudomonas: putida, P. aureofaciens, P. fluorescens and P. aeruginosa, tagged with the green fluorescent protein (GFP) were grown in flow chambers with a defined minimal medium as substrate. Analysis by the COMSTAT program of four variables describing biofilm structure - mean thickness, roughness, substratum coverage and surface to volume ratio - showed that the four Pseudomonas: strains represent different modes of biofilm growth. P. putida had a unique developmental pattern starting with single cells on the substratum growing into micro-colonies, which were eventually succeeded by long filaments and elongated cell clusters. P. aeruginosa colonized the entire substratum, and formed flat, uniform biofilms. P. aureofaciens resembled P. aeruginosa, but had a stronger tendency to form micro-colonies. Finally, the biofilm structures of P. fluorescens had a phenotype intermediate between those of P. putida and P. aureofaciens. Analysis of biofilms of P. aureofaciens growing on 0.03 mM, 0.1 mM or 0.5 mM citrate minimal media showed that mean biofilm thickness increased with increasing citrate concentration. Moreover, biofilm roughness increased with lower citrate concentrations, whereas surface to volume ratio increased with higher citrate concentrations.

Experimental reproducibility in flow-chamber biofilms

The structural organization of microbial communities is influenced by many factors, e.g. nutrient composition, shear stress and temperature. This paper presents a general method for quantitative comparison of biofilm structures and assessment of experimental reproducibility between independent biofilm experiments. By using a novel computer program, COMSTAT, biofilm structures of Pseudomonas aeruginosa and an isogenic rpoS mutant were quantified. The strains were tagged with the green fluorescent protein (GFP) and grown in flow chambers with a defined minimal medium as substrate. Three independent rounds of biofilm experiments were performed and in each round, each of the two variants was grown in two separate channels. Nine image stacks were acquired in each channel 146 h after inoculation. An analysis of variance model incorporating the factors experiment round, bacterial strain, channel number and image stack number was used to analyse the data calculated by COMSTAT. Experimental reproducibility was verified by estimating the magnitude of the variance of the effects round (sigma(2)R) and the interaction between bacterial strain and round (sigma(2)BR). Mean thickness of the wild-type and rpoS mutant biofilms was estimated at 6.31 microm (SE 0.81 microm) and 16.85 microm (SE 0.87 microm), respectively.

Modern microscopy in biofilm research: confocal microscopy and other approaches

Microscopy is the only technique whereby bacterial biofilms can be studied at the single-cell level in situ. Our understanding of biofilm structure, physiology and control hinges on the application of confocal scanning laser microscopy and other advanced microscopic techniques. Gene expression in four dimensions (x,y,z,t), interspecies interactions, and the role of exopolymer are being defined.

In situ gene expression in mixed-culture biofilms: evidence of metabolic interactions between community members

Microbial communities growing in laboratory-based flow chambers were investigated in order to study compartmentalization of specific gene expression. Among the community members studied, the focus was in particular on Pseudomonas putida and a strain of an Acinetobacter sp., and the genes studied are involved in the biodegradation of toluene and related aromatic compounds. The upper-pathway promoter (Pu) and the meta-pathway promoter (Pm) from the TOL plasmid were fused independently to the gene coding for the green fluorescent protein (GFP), and expression from these promoters was studied in P. putida, which was a dominant community member. Biofilms were cultured in flow chambers, which in combination with scanning confocal laser microscopy allowed direct monitoring of promoter activity with single-cell spatial resolution. Expression from the Pu promoter was homogeneously induced by benzyl alcohol in both community and pure-culture biofilms, while the Pm promoter was induced in the mixed community but not in a pure-culture biofilm. By sequentially adding community members, induction of Pm was shown to be a consequence of direct metabolic interactions between an Acinetobacter species and P. putida. Furthermore, in fixed biofilm samples organism identity was determined and gene expression was visualized at the same time by combining GFP expression with in situ hybridization with fluorescence-labeled 16S rRNA targeting probes. This combination of techniques is a powerful approach for investigating structure-function relationships in microbial communities.