Domains of the Shigella flexneri type III secretion system IpaB protein involved in secretion regulation

Development of a visual Adhesion/Invasion Inhibition Assay to assess the functionality of Shigella-specific antibodies

Introduction

Shigella is the etiologic agent of a bacillary dysentery known as shigellosis, which causes millions of infections and thousands of deaths worldwide each year due to Shigella's unique lifestyle within intestinal epithelial cells. Cell adhesion/invasion assays have been extensively used not only to identify targets mediating host-pathogen interaction, but also to evaluate the ability of Shigella-specific antibodies to reduce virulence. However, these assays are time-consuming and labor-intensive and fail to assess differences at the single-cell level.

Objectives and methods

Here, we developed a simple, fast and high-content method named visual Adhesion/Invasion Inhibition Assay (vAIA) to measure the ability of anti-Shigellaantibodies to inhibit bacterial adhesion to and invasion of epithelial cells by using the confocal microscope Opera Phenix.

Results

We showed that vAIA performed well with a pooled human serum from subjects challenged with S. sonnei and that a specific anti-IpaD monoclonal antibody effectively reduced bacterial virulence in a dose-dependent manner.

Discussion

vAIA can therefore inform on the functionality of polyclonal and monoclonal responses thereby supporting the discovery of pathogenicity mechanisms and the development of candidate vaccines and immunotherapies. Lastly, this assay is very versatile and may be easily applied to other Shigella species or serotypes and to different pathogens.

Functional assays to evaluate antibody-mediated responses against Shigella: a review

Shigella is a major global pathogen and the etiological agent of shigellosis, a diarrheal disease that primarily affects low- and middle-income countries. Shigellosis is characterized by a complex, multistep pathogenesis during which bacteria use multiple invasion proteins to manipulate and invade the intestinal epithelium. Antibodies, especially against the O-antigen and some invasion proteins, play a protective role as titres against specific antigens inversely correlate with disease severity; however, the context of antibody action during pathogenesis remains to be elucidated, especially with Shigella being mostly an intracellular pathogen. In the absence of a correlate of protection, functional assays rebuilding salient moments of Shigella pathogenesis can improve our understanding of the role of protective antibodies in blocking infection and disease. In vitro assays are important tools to build correlates of protection. Only recently animal models to recapitulate human pathogenesis, often not in full, have been established. This review aims to discuss in vitro assays to evaluate the functionality of anti-Shigella antibodies in polyclonal sera in light of the multistep and multifaced Shigella infection process. Indeed, measurement of antibody level alone may limit the evaluation of full vaccine potential. Serum bactericidal assay (SBA), and other functional assays such as opsonophagocytic killing assays (OPKA), and adhesion/invasion inhibition assays (AIA), are instead physiologically relevant and may provide important information regarding the role played by these effector mechanisms in protective immunity. Ultimately, the review aims at providing scientists in the field with new points of view regarding the significance of functional assays of choice which may be more representative of immune-mediated protection mechanisms.

Characterization of Functional B-Cell Epitopes at the Amino Terminus of Shigella Invasion Plasmid Antigen B (IpaB)

Shigella invasion plasmid antigen B (IpaB) plays an important role in causing shigellosis. While IpaB's protein structure, contribution to disease mechanism, and protective immunity against Shigella infection have been well studied, the significance of individual antigenic domains, especially at the N terminus, has not been systematically characterized. In an attempt to identify IpaB protein functional epitopes and to construct an optimized polyvalent multiepitope fusion antigen (MEFA) immunogen for development of a protein-based cross protective Shigella vaccine, in this study, we in silico identified immunodominant B-cell epitopes from the IpaB N terminus, fused each epitope to carrier protein CsaB (the major subunit of enterotoxigenic Escherichia coli CS4 adhesin) for epitope fusion proteins, immunized mice with each epitope fusion protein, examined IpaB-specific antibody responses, and assessed antibody functional activity against Shigella bacterial invasion. A total of 10 B-cell continuous epitopes were identified from IpaB N terminus, and after being fused to carrier protein CsaB, each epitope induced anti-IpaB IgG responses in the intramuscularly immunized mice. While in vitro antibody invasion inhibition assays demonstrated that antibodies derived from each identified epitope were functional, epitopes 1 (LAKILASTELGDNTIQAA), 2 (HSTSNILIPELKAPKSL), and 4 (QARQQKNLEFSDKI) induced antibodies to inhibit Shigella sonnei and Shigella flexneri invasion at levels similar to those of recombinant IpaB protein, suggesting that these three IpaB epitopes can be used potentially as IpaB-representing antigens to induce protective anti-IpaB antibodies and for construction of an epitope-based polyvalent MEFA protein immunogen for Shigella vaccine development. IMPORTANCE Currently, there are no effective measures for control or prevention of Shigella infection, the most common cause of diarrhea in children 3 to 5 years of age in developing countries. Challenges in developing Shigella vaccines include virulence heterogeneity among species and serotypes. To overcome virulence heterogeneity challenge and to develop a protein-based multivalent Shigella vaccine, we targeted a panel of virulence factors, including invasion plasmid antigens, identified functional antigenic domains or epitopes as representative antigens, and applied the novel epitope- and structure-based vaccinology platform multiepitope fusion antigen (MEFA) to integrate functional antigenic domains or epitopes into a backbone immunogen to produce a polyvalent immunogen for cross protective antibodies. Identification of functional IpaB epitopes from this study enhances our understanding of IpaB immunogenicity and allows us to directly utilize IpaB epitopes for construction of a cross protective polyvalent Shigella immunogen and to accelerate development of a protein-based Shigella vaccine.

Efficient production of immunologically active Shigella invasion plasmid antigens IpaB and IpaH using a cell-free expression system

Abstract

Shigella spp. invade the colonic epithelium and cause bacillary dysentery in humans. Individuals living in areas that lack access to clean water and sanitation are the most affected. Even though infection can be treated with antibiotics, Shigella antimicrobial drug resistance complicates clinical management. Despite decades of effort, there are no licensed vaccines to prevent shigellosis. The highly conserved invasion plasmid antigens (Ipa), which are components of the Shigella type III secretion system, participate in bacterial epithelial cell invasion and have been pursued as vaccine targets. However, expression and purification of these proteins in conventional cell-based systems have been challenging due to solubility issues and extremely low recovery yields. These difficulties have impeded manufacturing and clinical advancement. In this study, we describe a new method to express Ipa proteins using the Xpress^+TM cell-free protein synthesis (CFPS) platform. Both IpaB and the C-terminal domain of IpaH1.4 (IpaH-CTD) were efficiently produced with this technology at yields > 200 mg/L. Furthermore, the expression was linearly scaled in a bioreactor under controlled conditions, and proteins were successfully purified using multimode column chromatography to > 95% purity as determined by SDS-PAGE. Biophysical characterization of the cell-free synthetized IpaB and IpaH-CTD using SEC-MALS analysis showed well-defined oligomeric states of the proteins in solution. Functional analysis revealed similar immunoreactivity as compared to antigens purified from E. coli. These results demonstrate the efficiency of CFPS for Shigella protein production; the practicality and scalability of this method will facilitate production of antigens for Shigella vaccine development and immunological analysis.

Key points

• First report of Shigella IpaB and IpaH produced at high purity and yield using CFPS

• CFPS-IpaB and IpaH perform similarly to E. coli–produced proteins in immunoassays

• CFPS-IpaB and IpaH react with Shigella-specific human antibodies and are immunogenic in mice.

Graphical abstract

Topology and Contribution to the Pore Channel Lining of Plasma Membrane-Embedded Shigella flexneri Type 3 Secretion Translocase IpaB

Shigella spp. are human bacterial pathogens that cause bacillary dysentery. Virulence depends on a type 3 secretion system (T3SS), a highly conserved structure present in multiple important human and plant pathogens. Upon host cell contact, the T3SS translocon is delivered to the host membrane, facilitates bacterial docking to the membrane, and enables delivery of effector proteins into the host cytosol. The Shigella translocon is composed of two proteins, IpaB and IpaC, which together form this multimeric structure within host plasma membranes. Upon interaction of IpaC with host intermediate filaments, the translocon undergoes a conformational change that allows for bacterial docking onto the translocon and, together with host actin polymerization, enables subsequent effector translocation through the translocon pore. To generate additional insights into the translocon, we mapped the topology of IpaB in plasma membrane-embedded pores using cysteine substitution mutagenesis coupled with site-directed labeling and proximity-enabled cross-linking by membrane-permeant sulfhydryl reactants. We demonstrate that IpaB function is dependent on posttranslational modification by a plasmid-encoded acyl carrier protein. We show that the first transmembrane domain of IpaB lines the interior of the translocon pore channel such that the IpaB portion of the channel forms a funnel-like shape leading into the host cytosol. In addition, we identify regions of IpaB within its cytosolic domain that protrude into and are closely associated with the pore channel. Taken together, these results provide a framework for how IpaB is arranged within translocons natively delivered by Shigella during infection.

Shigella flexneri Diguanylate Cyclases Regulate Virulence

Shigella flexneri is an intracellular human pathogen that invades colonic cells and causes bloody diarrhea. S. flexneri evolved from commensal Escherichia coli, and genome comparisons reveal that S. flexneri has lost approximately 20% of its genes through the process of pathoadaptation, including a disproportionate number of genes associated with the turnover of the nucleotide-based second messenger cyclic di-GMP (c-di-GMP); however, the remaining c-di-GMP turnover enzymes are highly conserved. c-di-GMP regulates many behavioral changes in other bacteria in response to changing environmental conditions, including biofilm formation, but this signaling system has not been examined in S. flexneri. In this study, we expressed VCA0956, a constitutively active c-di-GMP synthesizing diguanylate cyclase (DGC) from Vibrio cholerae, in S. flexneri to determine if virulence phenotypes were regulated by c-di-GMP. We found that expressing VCA0956 in S. flexneri increased c-di-GMP levels, and this corresponds with increased biofilm formation and reduced acid resistance, host cell invasion, and plaque size. We examined the impact of VCA0956 expression on the S. flexneri transcriptome and found that genes related to acid resistance were repressed, and this corresponded with decreased survival to acid shock. We also found that individual S. flexneri DGC mutants exhibit reduced biofilm formation and reduced host cell invasion and plaque size, as well as increased resistance to acid shock. This study highlights the importance of c-di-GMP signaling in regulating S. flexneri virulence phenotypes. IMPORTANCE The intracellular human pathogen Shigella causes dysentery, resulting in as many as one million deaths per year. Currently, there is no approved vaccine for the prevention of shigellosis, and the incidence of antimicrobial resistance among Shigella species is on the rise. Here, we explored how the widely conserved c-di-GMP bacterial signaling system alters Shigella behaviors associated with pathogenesis. We found that expressing or removing enzymes associated with c-di-GMP synthesis results in changes in Shigella's ability to form biofilms, invade host cells, form lesions in host cell monolayers, and resist acid stress.

Cryo-EM structure of the needle filament tip complex of the Salmonella type III secretion injectisome

Type III secretion systems are multiprotein molecular machines required for the virulence of several important bacterial pathogens. The central element of these machines is the injectisome, a ∼5-Md multiprotein structure that mediates the delivery of bacterially encoded proteins into eukaryotic target cells. The injectisome is composed of a cytoplasmic sorting platform, and a membrane-embedded needle complex, which is made up of a multiring base and a needle-like filament that extends several nanometers from the bacterial surface. The needle filament is capped at its distal end by another substructure known as the tip complex, which is crucial for the translocation of effector proteins through the eukaryotic cell plasma membrane. Here we report the cryo-EM structure of the Salmonella Typhimurium needle tip complex docked onto the needle filament tip. Combined with a detailed analysis of structurally guided mutants, this study provides major insight into the assembly and function of this essential component of the type III secretion protein injection machine.

The Shigella Type III Secretion System: An Overview from Top to Bottom

Shigella comprises four species of human-restricted pathogens causing bacillary dysentery. While Shigella possesses multiple genetic loci contributing to virulence, a type III secretion system (T3SS) is its primary virulence factor. The Shigella T3SS nanomachine consists of four major assemblies: the cytoplasmic sorting platform; the envelope-spanning core/basal body; an exposed needle; and a needle-associated tip complex with associated translocon that is inserted into host cell membranes. The initial subversion of host cell activities is carried out by the effector functions of the invasion plasmid antigen (Ipa) translocator proteins, with the cell ultimately being controlled by dedicated effector proteins that are injected into the host cytoplasm though the translocon. Much of the information now available on the T3SS injectisome has been accumulated through collective studies on the T3SS from three systems, those of Shigella flexneri, Salmonella typhimurium and Yersinia enterocolitica/Yersinia pestis. In this review, we will touch upon the important features of the T3SS injectisome that have come to light because of research in the Shigella and closely related systems. We will also briefly highlight some of the strategies being considered to target the Shigella T3SS for disease prevention.

Heterologous expression of Intimin and IpaB fusion protein in Lactococcus lactis and its mucosal delivery elicit protection against pathogenicity of Escherichia coli O157 and Shigella flexneri in a murine model

Escherichia coli O157:H7 and Shigella flexneri are the predominant diarrhoeal pathogens and those strains producing Shiga toxins cause life-threatening sequelae including hemolytic uremic syndrome (HUS) upon their entry into the host. Intimate adherence of E. coli O157 and invasion of S. flexneri in the host intestinal epithelial cells is mainly mediated by Intimin and IpaB proteins, respectively. In this study, we have synthesized chimera of immunodominant regions of Intimin (eae) and IpaB (ipaB) designated as EI and expressed it in Lactococcus lactis (LL-EI) to develop a combinatorial oral vaccine candidate. Immune parameters and protective efficacy of orally administered LL-EI were assessed in the murine model. Significant EI-specific serum IgG, IgA, and fecal IgA antibody titer were observed in the LL-EI group. Considerable increase in EI-specific splenocyte proliferation and a concurrent upregulation of both Th1 and Th2 cytokines was observed in LL-EI immunized mice. Flow cytometry analysis also revealed a significant increase in CD4 and CD8 cell counts in LL-EI immunized group compared to PBS, LL control group.In vitro studies using LL-EI immunized mice sera showed substantial protection against bacterial adhesion and invasion caused by E. coli O157 and Shigella flexneri¸ respectively. LL-EI immunized group challenged with E. coli O157 ceased fecal shedding within 6 days, and mice challenged with S. flexneri showed 93% survival with minimal bacterial load in the lungs. Our results indicate that LL-EI immunization elicits systemic, mucosal and cell-mediated immune responses, and can be a promising candidate for oral vaccine development against these pathogens.

In-silico design and production of a novel antigenic chimeric Shigella IpaB fused to C-terminal of Clostridium perfringens enterotoxin

The emergence of antibiotic-resistant phenotypes in Shigella serotypes and the high mortality rate, approximately one million dead annually, in affected patients announce a global demand for an effective serotype-independent vaccine against Shigella. This study aims to design, express, and purify a novel chimeric protein, as a serotype-independent vaccine candidate against Shigella containing full-length Shigella invasion plasmid antigen B (IpaB) and a C-terminal fragment (residues 194-319) of Clostridium perfringens enterotoxin (C-CPE) as a mucosal adjuvant. Several online databases and bioinformatics software were utilized to design the chimeric protein and the relative recombinant gene. The recombinant gene encoding IpaB-CPE_194-319 was synthesized, cloned into pACYCDuet-1 expression vector, and transferred to E. coli Bl21 (DE3) cells. IpaB-CPE_194-319 was then expressed in auto-induction medium, purified and characterized using MALDI-TOF-TOF mass spectrometry. Followed by subcutaneous injection of the purified IpaB-CPE_194-319 to BALB/c mice, antigenicity of this chimeric protein was determined through performing dot-blot immunoassay on nitrocellulose membrane using mice sera. The outcomes of this study show the successful design, efficient expression, and purification of IpaB-CPE_194-319 divalent chimeric protein under mentioned conditions. The obtained results also demonstrate the intrinsic antigenic property of IpaB-CPE_194-319.

The type III secretion system needle, tip, and translocon

Many Gram-negative bacteria pathogenic to plants and animals deploy the type III secretion system (T3SS) to inject virulence factors into their hosts. All bacteria that rely on the T3SS to cause infectious diseases in humans have developed antibiotic resistance. The T3SS is an attractive target for developing new antibiotics because it is essential in virulence, and part of its structural component is exposed on the bacterial surface. The structural component of the T3SS is the needle apparatus, which is assembled from over 20 different proteins and consists of a base, an extracellular needle, a tip, and a translocon. This review summarizes the current knowledge on the structure and assembly of the needle, tip, and translocon.

The Tip Complex: From Host Cell Sensing to Translocon Formation

Type III secretion systems are used by some Gram-negative bacteria to inject effector proteins into targeted eukaryotic cells for the benefit of the bacterium. The type III secretion injectisome is a complex nanomachine comprised of four main substructures including a cytoplasmic sorting platform, an envelope-spanning basal body, an extracellular needle and an exposed needle tip complex. Upon contact with a host cell, secretion is induced, resulting in the formation of a translocon pore in the host membrane. Translocon formation completes the conduit needed for effector secretion into the host cell. Control of type III secretion occurs in response to environmental signals, with the final signal being host cell contact. Secretion control occurs primarily at two sites-the cytoplasmic sorting platform, which determines secretion hierarchy, and the needle tip complex, which is critical for sensing and responding to environmental signals. The best-characterized injectisomes are those from Yersinia, Shigella and Salmonella species where there is a wealth of information on the tip complex and the two translocator proteins. Of these systems, the best characterized from a secretion regulation standpoint is Shigella. In the Shigella system, the tip complex and the first secreted translocon both contribute to secretion control and, thus, both are considered components of the tip complex. In this review, all three of these type III secretion systems are described with discussion focused on the structure and formation of the injectisome tip complex and what is known of the transition from nascent tip complex to assembled translocon pore.

In silico design of a novel chimeric shigella IpaB fused to C terminal of clostridium perfringens enterotoxin as a vaccine candidate

This study aimed to design a novel chimeric protein in silico to serve as a serotype-independent vaccine candidate against Shigella. The chimera contains amino acid residues 240–460 of Shigella invasion plasmid antigen B (IpaB) and the C-terminus of Clostridium perfringens enterotoxin (C-CPE). Amino acid sequences of 537 peptide linkers were obtained from two protein linker databases. 3D structures of IpaB-CPE_290–319, IpaB-CPE_184–319, IpaB-CPE_194–319 and 537 newly designed IpaB-linker-CPE_290–319 constructs with varying linker regions were predicted. These predicted 3D structures were merged with the 3D structures of native IpaB_240–460, CPE_194–319, CPE_184–319 and CPE_290–319 to select the structure most similar to native IpaB and C-CPE. Several in silico tools were used to determine the suitability of the selected IpaB-C-CPE structure as a vaccine candidate. None of the 537 linkers was capable of preserving the native structure of CPE_290–319 within the IpaB-linker-CPE_290–319 structure. In silico analysis determined that the IpaB-CPE_194–319 3D structure was the most similar to the 3D structure of the respective native CPE domain and that it was a stable chimeric protein exposing multiple B-cell epitopes. IpaB-CPE_194–319 was designed for its capability to bind to human intestinal epithelial and M cells and to accumulate on these cells. The predicted B-cell epitopes are likely to be capable of inducing a mucosal antibody response in the human intestine against Shigella IpaB. This study also showed that the higher binding affinities of CPE_184–319 and CPE_194–319 to claudin molecules than those of CPE_290–319 is the result of preserving the 3D structures of CPE_184–319 and CPE_194–319 when they are linked to the C-termini of other proteins.

Steps for Shigella Gatekeeper Protein MxiC Function in Hierarchical Type III Secretion Regulation

Type III secretion systems are complex nanomachines used for injection of proteins from Gram-negative bacteria into eukaryotic cells. Although they are assembled when the environmental conditions are appropriate, they only start secreting upon contact with a host cell. Secretion is hierarchical. First, the pore-forming translocators are released. Second, effector proteins are injected. Hierarchy between these protein classes is mediated by a conserved gatekeeper protein, MxiC, in Shigella. As its molecular mechanism of action is still poorly understood, we used its structure to guide site-directed mutagenesis and to dissect its function. We identified mutants predominantly affecting all known features of MxiC regulation as follows: secretion of translocators, MxiC and/or effectors. Using molecular genetics, we then mapped at which point in the regulatory cascade the mutants were affected. Analysis of some of these mutants led us to a set of electron paramagnetic resonance experiments that provide evidence that MxiC interacts directly with IpaD. We suggest how this interaction regulates a switch in its conformation that is key to its functions.

Type III secretion systems: the bacterial flagellum and the injectisome

The flagellum and the injectisome are two of the most complex and fascinating bacterial nanomachines. At their core, they share a type III secretion system (T3SS), a transmembrane export complex that forms the extracellular appendages, the flagellar filament and the injectisome needle. Recent advances, combining structural biology, cryo-electron tomography, molecular genetics, in vivo imaging, bioinformatics and biophysics, have greatly increased our understanding of the T3SS, especially the structure of its transmembrane and cytosolic components, the transcriptional, post-transcriptional and functional regulation and the remarkable adaptivity of the system. This review aims to integrate these new findings into our current knowledge of the evolution, function, regulation and dynamics of the T3SS, and to highlight commonalities and differences between the two systems, as well as their potential applications.

Unprecedented Abundance of Protein Tyrosine Phosphorylation Modulates Shigella flexneri Virulence

Evidence is accumulating that protein tyrosine phosphorylation plays a crucial role in the ability of important human bacterial pathogens to cause disease. While most works have concentrated on its role in the regulation of a major bacterial virulence factor, the polysaccharide capsule, recent studies have suggested a much broader role for this post-translational modification. This prompted us to investigate protein tyrosine phosphorylation in the human pathogen Shigella flexneri. We first completed a tyrosine phosphoproteome, identifying 905 unique tyrosine phosphorylation sites on at least 573 proteins (approximately 15% of all proteins). This is the most tyrosine-phosphorylated sites and proteins in a single bacterium identified to date, substantially more than the level seen in eukaryotic cells. Most had not previously been identified and included proteins encoded by the virulence plasmid, which is essential for S. flexneri to invade cells and cause disease. In order to investigate the function of these phosphorylation sites in important virulence factors, phosphomimetic and ablative mutations were constructed in the type 3 secretion system ATPase Spa47 and the master virulence regulator VirB. This revealed that tyrosine residues phosphorylated in our study are critical for Spa47 and VirB activity, and tyrosine phosphorylation likely regulates their functional activity and subsequently the virulence of this major human pathogen. This study suggests that tyrosine phosphorylation plays a critical role in regulating a wide variety of virulence factors in the human pathogen S. flexneri and serves as a base for future studies defining its complete role.

Genetic Dissection of the Signaling Cascade that Controls Activation of the Shigella Type III Secretion System from the Needle Tip

Many Gram-negative bacterial pathogens use type III secretion systems (T3SSs) for virulence. The Shigella T3SS consists of a hollow needle, made of MxiH and protruding from the bacterial surface, anchored in both bacterial membranes by multimeric protein rings. Atop the needle lies the tip complex (TC), formed by IpaD and IpaB. Upon physical contact with eukaryotic host cells, T3S is initiated leading to formation of a pore in the eukaryotic cell membrane, which is made of IpaB and IpaC. Through the needle and pore channels, further bacterial proteins are translocated inside the host cell to meditate its invasion. IpaD and the needle are implicated in transduction of the host cell-sensing signal to the T3S apparatus. Furthermore, the sensing-competent TC seems formed of 4 IpaDs topped by 1 IpaB. However, nothing further is known about the activation process. To investigate IpaB’s role during T3SS activation, we isolated secretion-deregulated IpaB mutants using random mutagenesis and a genetic screen. We found ipaB point mutations in leading to defects in secretion activation, which sometimes diminished pore insertion and host cell invasion. We also demonstrated IpaB communicates intramolecularly and intermolecularly with IpaD and MxiH within the TC because mutations affecting these interactions impair signal transduction.

MxiA, MxiC and IpaD Regulate Substrate Selection and Secretion Mode in the T3SS of Shigella flexneri

Type III secretion systems (T3SSs) are central virulence devices for many Gram-negative bacterial pathogens of humans, animals & plants. Upon physical contact with eukaryotic host cells, they translocate virulence-mediating proteins, known as effectors, into them during infection. T3SSs are gated from the outside by host-cell contact and from the inside via two cytoplasmic negative regulators, MxiC and IpaD in Shigella flexneri, which together control the effector secretion hierarchy. Their absence leads to premature and increased secretion of effectors. Here, we investigated where and how these regulators act. We demonstrate that the T3SS inner membrane export apparatus protein MxiA plays a role in substrate selection. Indeed, using a genetic screen, we identified two amino acids located on the surface of MxiA's cytoplasmic region (MxiAC) which, when mutated, upregulate late effector expression and, in the case of MxiAI674V, also secretion. The cytoplasmic region of MxiA, but not MxiAN373D and MxiAI674V, interacts directly with the C-terminus of MxiC in a two-hybrid assay. Efficient T3S requires a cytoplasmic ATPase and the proton motive force (PMF), which is composed of the ΔΨ and the ΔpH. MxiA family proteins and their regulators are implicated in utilization of the PMF for protein export. However, our MxiA point mutants show similar PMF utilisation to wild-type, requiring primarily the ΔΨ. On the other hand, lack of MxiC or IpaD, renders the faster T3S seen increasingly dependent on the ΔpH. Therefore, MxiA, MxiC and IpaD act together to regulate substrate selection and secretion mode in the T3SS of Shigella flexneri.

Characterization of the Shigella and Salmonella Type III Secretion System Tip-Translocon Protein-Protein Interaction by Paramagnetic Relaxation Enhancement

Many Gram-negative pathogens, such as Shigella and Salmonella, assemble the type III secretion system (T3SS) to inject virulence proteins directly into eukaryotic cells to initiate infectious diseases. The needle apparatus of the T3SS consists of a base, an extracellular needle, a tip protein complex, and a translocon. The atomic structure of the assembled tip complex and the translocon is unknown. Here, we show by NMR paramagnetic relaxation enhancement (PRE) that the mixed α-β domain at the distal region of the Shigella and Salmonella tip proteins interacts with the N-terminal ectodomain of their major translocon proteins. Our results reveal the binding surfaces involved in the tip-translocon protein-protein interaction and provide insights about the assembly of the needle apparatus of the T3SS.

The Many Faces of IpaB

The type III secretion system (T3SS) is Shigella's most important virulence factor. The T3SS apparatus (T3SA) is comprised of an envelope-spanning basal body and an external needle topped by a tip complex protein called IpaD. This nanomachine is used to deliver effector proteins into host cells to promote pathogen entry. A key component of the matured T3SS needle tip complex is the translocator protein IpaB. IpaB can exist in multiple states when prepared as a recombinant protein, however, it has also been described as having additional roles in Shigella pathogenesis. This mini-review will briefly describe some of the features of IpaB as a T3SS needle tip protein, as a pore-forming translocator protein and as an effector protein. Reflection on the potential importance of the different in vitro states of IpaB on its function and importance in serotype-independent vaccines is also provided.

Reassessment of MxiH subunit orientation and fold within native Shigella T3SS needles using surface labelling and solid-state NMR

T3SSs are essential virulence determinants of many Gram-negative bacteria, used to inject bacterial effectors of virulence into eukaryotic host cells. Their major extracellular portion, a ∼50 nm hollow, needle-like structure, is essential to host cell sensing and the conduit for effector secretion. It is formed of a small, conserved subunit arranged as a helical polymer. The structure of the subunit has been studied by electron cryomicroscopy within native polymers and by solid-state NMR in recombinant polymers, yielding two incompatible atomic models. To resolve this controversy, we re-examined the native polymer used for electron cryomicroscopy via surface labelling and solid-state NMR. Our data show the orientation and overall fold of the subunit within this polymer is as established by solid-state NMR for recombinant polymers.

The roles of the virulence factor IpaB in Shigella spp. in the escape from immune cells and invasion of epithelial cells

Shigellosis is an acute invasive enteric infection by the Gram negative pathogen Shigella, which causes human diarrhea. Shigella, which are highly epidemic and pathogenic, have become a serious public health problem. The virulence plasmid is a large plasmid essential to the infected host cells. Many virulence factors are encoded in the ipa-mxi-spa region by the virulence plasmid. IpaB is a multifunctional and essential virulence factor in the infection process. In this review article, we introduce the recent studies of the effect of IpaB in Shigella-infected host cells. IpaB is involved in a type III secretion system (T3SS) structure. It also controls the secretion of virulence factors and Shigella adhesion to host cells. In addition, it forms the ion pore, destroys phagosomes, and induces the immune cell's apoptosis or necrosis. Moreover, IpaB can become a potential antigen for Shigella vaccine development.

Engineered nanoparticles mimicking cell membranes for toxin neutralization

Protein toxins secreted from pathogenic bacteria and venomous animals rely on multiple mechanisms to overcome the cell membrane barrier to inflict their virulence effect. A promising therapeutic concept toward developing a broadly applicable anti-toxin platform is to administer cell membrane mimics as decoys to sequester these virulence factors. As such, lipid membrane-based nanoparticulates are an ideal candidate given their structural similarity to cellular membranes. This article reviews the virulence mechanisms employed by toxins at the cell membrane interface and highlights the application of cell-membrane mimicking nanoparticles as toxin decoys for systemic detoxification. In addition, the implication of particle/toxin nanocomplexes in the development of toxoid vaccines is discussed.

Co-administration of rIpaB domain of Shigella with rGroEL of S. Typhi enhances the immune responses and protective efficacy against Shigella infection

Shigella species cause severe bacillary dysentery in humans and are associated with high morbidity and mortality. The Invasion plasmid antigen (IpaB) protein, which is conserved across all Shigella spp., induces macrophage cell death and is required to invade host cells. The present study evaluates the immunogenicity and protective efficacy of the recombinant (r) domain region of IpaB (rIpaB) of S. flexneri. rIpaB was administered either alone or was co-administered with the rGroEL (heat shock protein 60) protein from S. Typhi as an adjuvant in a mouse model of intranasal immunization. The IpaB domain region (37 kDa) of S. flexneri was amplified from an invasion plasmid, cloned, expressed in BL21 Escherichia coli cells and purified. Immunization with the rIpaB domain alone stimulated both humoral and cell-mediated immune responses. Furthermore, robust antibody (IgG, IgA) and T-cell responses were induced when the rIpaB domain was co-administered with rGroEL. Antibody isotyping revealed higher IgG1 and IgG2a antibody titers and increased interferon-gamma (IFN-γ) secretion in the co-administered group. Immunization of mice with the rIpaB domain alone protected 60%-70% of the mice from lethal infection by S. flexneri, S. boydii and S. sonnei, whereas co-administration with rGroEL increased the protective efficacy to 80%-85%. Organ burden and histopathological studies also revealed a significant reduction in lung infection in the co-immunized mice compared with mice immunized with the rIpaB domain alone. This study emphasizes that the co-administration of the rIpaB domain and rGroEL protein improves immune responses in mice and increases protective efficacy against Shigella infection. This is also the first report to evaluate the potential of the GroEL (Hsp 60) protein of S. Typhi as an adjuvant molecule, thereby overcoming the need for commercial adjuvants.

Three-dimensional electron microscopy reconstruction and cysteine-mediated crosslinking provide a model of the type III secretion system needle tip complex

Type III secretion systems are found in many Gram-negative bacteria. They are activated by contact with eukaryotic cells and inject virulence proteins inside them. Host cell detection requires a protein complex located at the tip of the device's external injection needle. The Shigella tip complex (TC) is composed of IpaD, a hydrophilic protein, and IpaB, a hydrophobic protein, which later forms part of the injection pore in the host membrane. Here we used labelling and crosslinking methods to show that TCs from a ΔipaB strain contain five IpaD subunits while the TCs from wild-type can also contain one IpaB and four IpaD subunits. Electron microscopy followed by single particle and helical image analysis was used to reconstruct three-dimensional images of TCs at ∼ 20 Å resolution. Docking of an IpaD crystal structure, constrained by the crosslinks observed, reveals that TC organisation is different from that of all previously proposed models. Our findings suggest new mechanisms for TC assembly and function. The TC is the only site within these secretion systems targeted by disease-protecting antibodies. By suggesting how these act, our work will allow improvement of prophylactic and therapeutic strategies.

Chlamydia pneumoniae CopD translocator protein plays a critical role in type III secretion (T3S) and infection

Pathogenic Gram-negative bacteria use type III secretion (T3S) to inject effector proteins into the host cell to create appropriate conditions for infection and intracellular replication. Chlamydia spp. are believed to use T3S to infect their host cell, and the translocator proteins are an essential component of this system. Chlamydia pneumoniae contains genes encoding two sets of translocator proteins; CopB and CopD, and CopB2 and CopD2. In this study, we identified novel interactions between CopD and three type III secretion proteins; namely, CopN, CdsN, and CdsF. We identified a CopD putative chaperone binding motif, PxLxxP, within the N-terminal region (CopD amino acids 120-125), which was necessary for interaction with its putative chaperone LcrH_1. Using size exclusion chromatography, we showed that CopD and LcrH_1 formed higher order structures in solution with CopD and LcrH_1 binding in a ratio of 1∶1, which is unique for T3SS translocator proteins. Lastly, we showed that antibodies to CopD reduced C. pneumoniae infectivity by >95%. Collectively, this data suggests that CopD plays a critical role in pathogenesis and likely functions as a hydrophobic translocator of the type III secretion system in Chlamydia pneumoniae.

Single amino acid substitutions on the needle tip protein IpaD increased Shigella virulence

Infection of colonic epithelial cells by Shigella is associated with the type III secretion system, which serves as a molecular syringe to inject effectors into host cells. This system includes an extracellular needle used as a conduit for secreted proteins. Two of these proteins, IpaB and IpaD, dock at the needle tip to control secretion and are also involved in the insertion of a translocation pore into host cell membrane allowing effector delivery. To better understand the function of IpaD, we substituted thirteen residues conserved among homologous proteins in other bacterial species. Generated variants were tested for their ability to surface expose IpaB and IpaD, to control secretion, to insert the translocation pore, and to invade host cells. In addition to a first group of seven ipaD variants that behaved similarly to the wild-type strain, we identified a second group with mutations V314D and I319D that deregulated secretion of all effectors, but remained fully invasive. Moreover, we identified a third group with mutations Y153A, T161D, Q165L and Y276A, that exhibited increased levels of translocators secretion, pore formation, and cell entry. Altogether, our results offer a better understanding of the role of IpaD in the control of Shigella virulence.

Structure and biophysics of type III secretion in bacteria

Many plant and animal bacterial pathogens assemble a needle-like nanomachine, the type III secretion system (T3SS), to inject virulence proteins directly into eukaryotic cells to initiate infection. The ability of bacteria to inject effectors into host cells is essential for infection, survival, and pathogenesis for many Gram-negative bacteria, including Salmonella, Escherichia, Shigella, Yersinia, Pseudomonas, and Chlamydia spp. These pathogens are responsible for a wide variety of diseases, such as typhoid fever, large-scale food-borne illnesses, dysentery, bubonic plague, secondary hospital infections, and sexually transmitted diseases. The T3SS consists of structural and nonstructural proteins. The structural proteins assemble the needle apparatus, which consists of a membrane-embedded basal structure, an external needle that protrudes from the bacterial surface, and a tip complex that caps the needle. Upon host cell contact, a translocon is assembled between the needle tip complex and the host cell, serving as a gateway for translocation of effector proteins by creating a pore in the host cell membrane. Following delivery into the host cytoplasm, effectors initiate and maintain infection by manipulating host cell biology, such as cell signaling, secretory trafficking, cytoskeletal dynamics, and the inflammatory response. Finally, chaperones serve as regulators of secretion by sequestering effectors and some structural proteins within the bacterial cytoplasm. This review will focus on the latest developments and future challenges concerning the structure and biophysics of the needle apparatus.

Shigella IpaD has a dual role: signal transduction from the type III secretion system needle tip and intracellular secretion regulation

Type III secretion systems (T3SSs) are protein injection devices essential for the interaction of many Gram-negative bacteria with eukaryotic cells. While Shigella assembles its T3SS when the environmental conditions are appropriate for invasion, secretion is only activated after physical contact with a host cell. First, the translocators are secreted to form a pore in the host cell membrane, followed by effectors which manipulate the host cell. Secretion activation is tightly controlled by conserved T3SS components: the needle tip proteins IpaD and IpaB, the needle itself and the intracellular gatekeeper protein MxiC. To further characterize the role of IpaD during activation, we combined random mutagenesis with a genetic screen to identify ipaD mutant strains unable to respond to host cell contact. Class II mutants have an overall defect in secretion induction. They map to IpaD's C-terminal helix and likely affect activation signal generation or transmission. The Class I mutant secretes translocators prematurely and is specifically defective in IpaD secretion upon activation. A phenotypically equivalent mutant was found in mxiC. We show that IpaD and MxiC act in the same intracellular pathway. In summary, we demonstrate that IpaD has a dual role and acts at two distinct locations during secretion activation.

Surface organelles assembled by secretion systems of Gram-negative bacteria: diversity in structure and function

Gram-negative bacteria express a wide variety of organelles on their cell surface. These surface structures may be the end products of secretion systems, such as the hair-like fibers assembled by the chaperone/usher (CU) and type IV pilus pathways, which generally function in adhesion to surfaces and bacterial-bacterial and bacterial-host interactions. Alternatively, the surface organelles may be integral components of the secretion machinery itself, such as the needle complex and pilus extensions formed by the type III and type IV secretion systems, which function in the delivery of bacterial effectors inside host cells. Bacterial surface structures perform functions critical for pathogenesis and have evolved to withstand forces exerted by the external environment and cope with defenses mounted by the host immune system. Given their essential roles in pathogenesis and exposed nature, bacterial surface structures also make attractive targets for therapeutic intervention. This review will describe the structure and function of surface organelles assembled by four different Gram-negative bacterial secretion systems: the CU pathway, the type IV pilus pathway, and the type III and type IV secretion systems.

Protein export according to schedule: architecture, assembly, and regulation of type III secretion systems from plant- and animal-pathogenic bacteria

Flagellar and translocation-associated type III secretion (T3S) systems are present in most gram-negative plant- and animal-pathogenic bacteria and are often essential for bacterial motility or pathogenicity. The architectures of the complex membrane-spanning secretion apparatuses of both systems are similar, but they are associated with different extracellular appendages, including the flagellar hook and filament or the needle/pilus structures of translocation-associated T3S systems. The needle/pilus is connected to a bacterial translocon that is inserted into the host plasma membrane and mediates the transkingdom transport of bacterial effector proteins into eukaryotic cells. During the last 3 to 5 years, significant progress has been made in the characterization of membrane-associated core components and extracellular structures of T3S systems. Furthermore, transcriptional and posttranscriptional regulators that control T3S gene expression and substrate specificity have been described. Given the architecture of the T3S system, it is assumed that extracellular components of the secretion apparatus are secreted prior to effector proteins, suggesting that there is a hierarchy in T3S. The aim of this review is to summarize our current knowledge of T3S system components and associated control proteins from both plant- and animal-pathogenic bacteria.

Needle length control and the secretion substrate specificity switch are only loosely coupled in the type III secretion apparatus of Shigella

The type III secretion apparatus (T3SA), which is evolutionarily and structurally related to the bacterial flagellar hook basal body, is a key virulence factor used by many Gram-negative bacteria to inject effector proteins into host cells. A hollow extracellular needle forms the injection conduit of the T3SA. Its length is tightly controlled to match specific structures at the bacterial and host-cell surfaces but how this occurs remains incompletely understood. The needle is topped by a tip complex, which senses the host cell and inserts as a translocation pore in the host membrane when secretion is activated. The interaction of two conserved proteins, inner-membrane Spa40 and secreted Spa32, respectively, in Shigella, is proposed to regulate needle length and to flick a type III secretion substrate specificity switch from needle components/Spa32 to translocator/effector substrates. We found that, as in T3SAs from other species, substitution N257A within the conserved cytoplasmic NPTH region in Spa40 prevented its autocleavage and substrate specificity switching. Yet, the spa40_N257A mutant made only slightly longer needles with a few needle tip complexes, although it could not form translocation pores. On the other hand, Δspa32, which makes extremely long needles and also formed only few tip complexes, could still form some translocation pores, indicating that it could switch substrate specificity to some extent. Therefore, loss of needle length control and defects in secretion specificity switching are not tightly coupled in either a Δspa32 mutant or a spa40_N257A mutant.

Structural characterization of a novel Chlamydia pneumoniae type III secretion-associated protein, Cpn0803

Type III secretion (T3S) is an essential virulence factor used by gram-negative pathogenic bacteria to deliver effector proteins into the host cell to establish and maintain an intracellular infection. Chlamydia is known to use T3S to facilitate invasion of host cells but many proteins in the system remain uncharacterized. The C. trachomatis protein CT584 has previously been implicated in T3S. Thus, we analyzed the CT584 ortholog in C. pneumoniae (Cpn0803) and found that it associates with known T3S proteins including the needle-filament protein (CdsF), the ATPase (CdsN), and the C-ring protein (CdsQ). Using membrane lipid strips, Cpn0803 interacted with phosphatidic acid and phosphatidylinositol, suggesting that Cpn0803 may associate with host cells. Crystallographic analysis revealed a unique structure of Cpn0803 with a hydrophobic pocket buried within the dimerization interface that may be important for binding small molecules. Also, the binding domains on Cpn0803 for CdsN, CdsQ, and CdsF were identified using Pepscan epitope mapping. Collectively, these data suggest that Cpn0803 plays a role in T3S.

Shigella gets captured to gain entry

The type III secretion system-dependent epithelial invasion and dissemination of Shigella is stimulated by ATP released through hemichannels. Romero et al. (2011) show that prior to epithelial contact, Shigella is captured by nanometer-thin micropodial extensions at a distance from the cell surface, in a process involving ATP and connexin-mediated signaling.

Membrane targeting and pore formation by the type III secretion system translocon

The type III secretion system (T3SS) is a complex macromolecular machinery employed by a number of Gram-negative species to initiate infection. Toxins secreted through the system are synthesized in the bacterial cytoplasm and utilize the T3SS to pass through both bacterial membranes and the periplasm, thus being introduced directly into the eukaryotic cytoplasm. A key element of the T3SS of all bacterial pathogens is the translocon, which comprises a pore that is inserted into the membrane of the target cell, allowing toxin injection. Three macromolecular partners associate to form the translocon: two are hydrophobic and one is hydrophilic, and the latter also associates with the T3SS needle. In this review, we discuss recent advances on the biochemical and structural characterization of the proteins involved in translocon formation, as well as their participation in the modification of intracellular signalling pathways upon infection. Models of translocon assembly and regulation are also discussed.