Suppression of an Escherichia coli dnaA mutation by the integrated R factor R100.1: origin of chromosome replication during exponential growth

End of the beginning: elongation and termination features of alternative modes of chromosomal replication initiation in bacteria

In bacterial cells, bidirectional replication of the circular chromosome is initiated from a single origin (oriC) and terminates in an antipodal terminus region such that movement of the pair of replication forks is largely codirectional with transcription. The terminus region is flanked by discrete Ter sequences that act as polar, or direction-dependent, arrest sites for fork progression. Alternative oriC-independent modes of replication initiation are possible, one of which is constitutive stable DNA replication (cSDR) from transcription-associated RNA–DNA hybrids or R-loops. Here, I discuss the distinctive attributes of fork progression and termination associated with different modes of bacterial replication initiation. Two hypothetical models are proposed: that head-on collisions between pairs of replication forks, which are a feature of replication termination in all kingdoms of life, provoke bilateral fork reversal reactions; and that cSDR is characterized by existence of distinct subpopulations in bacterial cultures and a widespread distribution of origins in the genome, each with a small firing potential. Since R-loops are known to exist in eukaryotic cells and to inflict genome damage in G1 phase, it is possible that cSDR-like events promote aberrant replication initiation even in eukaryotes.

The E. coli cell cycle and the plasmid R1 replication cycle in the absence of the DnaA protein

In E. coli strain EC::71CW chromosome replication is under the control of the R1 miniplasmid pOU71. A dnaA850::Tn10 derivative of EC::71CW was viable, which confirmed that R1 can replicate in the absence of the DnaA protein. The frequency of initiation of replication was, however, lowered and cell division was severely disturbed due to underreplication of the chromosome. Both replication and cell division could be restored to normal by increasing the production of RepA, the rate-limiting protein for initiation of replication from the integrated R1 origin. Therefore, the RepA protein seems to compensate for the absence of DnaA in the initiation of replication and assembly of replisomes. The role of the DnaA protein in the initiation of DNA replication, and as an overall regulator of the chromosome replication and cell division cycles of E. coli, is discussed in view of these results.

DnaA protein is not essential for replication of IncFII plasmid NR1

By transformation of dnaA null mutant host cells that are suppressed either by an rnh mutation or by chromosomal integration of a mini-R1 plasmid, it was shown that replication of miniplasmids composed of the NR1 minimal replicon had no absolute dependence upon DnaA protein. In addition, the suppression of the dnaA null mutation by the integrated mini-R1, which is an IncFII relative of NR1, was found to be sensitive to the expression of IncFII-specific plasmid incompatibility. This suggests that the integrative suppression by mini-R1 is under the control of the normal IncFII plasmid replication circuitry. Although NR1 replication had no absolute requirement for DnaA, the copy numbers of NR1-derived miniplasmids were lower in dnaA null mutants, and the plasmids exhibited a much reduced stability of inheritance during subculture in the absence of selection. This suggests that DnaA protein may participate in IncFII plasmid replication in some auxiliary way, such as by increasing the efficiency of formation of an open initiation complex at the plasmid replication origin. Such an auxiliary role for DnaA in IncFII replication would be different from that for replication of most other plasmids examined, for which DnaA has been found to be either essential or unimportant.

Integrative suppression of dnaA(Ts) mutations mediated by plasmid F in Escherichia coli is a DnaA-dependent process

The thermosensitivity of dnaA(Ts) mutations can be suppressed by integration of plasmid F (integrative suppression). In the light of the recent finding that F requires DnaA protein for both establishment and maintenance, integrative suppression of 11 dnaA(Ts) mutations by a mini-F, pML31, integrated near oriC was examined. The plating efficiency of integratively suppressed strains was dnaA(Ts) allele-dependent and medium-dependent. The initiation capability of suppressed dnaA(Ts) strains lacking the oriC site and their F- counterparts was determined at various temperatures between 30 degrees C and 42 degrees C. The degree of integrative suppression measured by the initiation capability varied in a dnaA(Ts) allele-dependent manner. F-directed DNA replication was most affected by the dnaA(Ts) mutations mapping in the middle of the gene whereas oriC-dependent replication was most thermosensitive in strains carrying mutations mapping in the carboxy-terminal half of the gene. The results indicated that the integrative suppression by F plasmid is a DnaA-dependent process and suggested that the requirements for DnaA protein in the oriC-dependent replication and F replication processes are qualitatively different.

The involvement of host replication proteins and of specific origin sequences in the in vitro replication of miniplasmid R1 DNA

The in vitro replication of R1 miniplasmid promoted by purified preparations of the plasmid encoded RepA protein in cell extracts of E. coli is resistant to rifampicin and can be completely inhibited by antibodies against DnaG, the primase of the cell, as well as by antibodies against proteins DnaB and SSB. R1 replication is abolished in extracts deficient in the DnaA protein. This deficiency is efficiently complemented by purified preparations of the DnaA protein. The in vitro replication of plasmid R1 is also abolished in DnaC deficient extracts and by a 10 bp deletion (nucleotides 1463-1472) within the minimal origin region. These data indicate the requirement of the DnaA, DnaB, DnaC, DnaG and SSB replication proteins of the host, as well as of specific oriR1 sequences for the RepA dependent replication of plasmid R1. The implications of these results for the initiation of R1 replication are discussed.

Host participation in plasmid maintenance: dependence upon dnaA of replicons derived from P1 and F

Nonparticipation of the bacterial dnaA gene in plasmid replication has been assumed to be the general rule. In conditional dnaA mutants of Escherichia coli, only plasmid pSC101 has been shown to have a dnaA requirement. Experiments with dnaA null mutants of E. coli, presented here, show that dnaA plays a critical and direct role in the replication of miniplasmids derived from P1 and F as it does in the initiation of bacterial replication. Evidence is also presented for the existence of a dnaA-independent secondary replicon of P1 that is able to drive bacterial chromosome replication but is inadequate to support the maintenance of P1 as a plasmid in E. coli.

DNA-protein interactions during replication of genetic elements of bacteria

Specific interactions of DNA with proteins are required for both the replication of deoxyribonucleic acid proper and its regulation. Genetic elements of bacteria, their extrachromosomal elements in particular, represent a suitable model system for studies of these processes at the molecular level. In addition to replication enzymes (DNA polymerases), a series of other protein factors (e.g. topoisomerases, DNA unwinding enzymes, and DNA binding proteins) are involved in the replication of the chromosomal, phage and plasmid DNA. Specific interactions of proteins with DNA are particularly important in the regulation of initiation of DNA synthesis. Association of DNAs with the cell membrane also plays an important role in their replication in bacteria.

A 140 base-pair DNA segment from the kanamycin resistance region of plasmid R1 acts as an origin of replication and promotes site-specific recombination

A 140 base-pair DNA segment situated just upstream of the kanamycin resistance gene of transposon Tn2350, a transposon carried by the plasmid R1, was found to act as an origin of replication and allow autonomous replication of a plasmid composed only of the segment and of the tetracycline resistance gene of pBR322. This segment also promotes site-specific recombination: when cloned in pBR322 it promotes multimer formation in a recA- strain. If two copies are cloned on the same plasmid they promote either deletion or inversion of the intervening region, depending on their orientation relative to each other. DNA gyrase seems to be involved in this process since the inversion rate, in a plasmid carrying sequences in opposite orientations, varies in different nalidixic acid-resistant strains (gyr A mutants) independently isolated.

Isolation and characterization of a higher-copy-number mutant of plasmid R6K

A stable copy-number mutant (pNH601) of plasmid R6K was isolated by selection for increased resistance to ampicillin determined by this plasmid. The size of the mutant plasmid was found to be unchanged (26 Mg/mol) but it is present in 27 copies of pNH601 per E. coli K-12 chromosome which represents a two-fold increase of R6K copy number value. The following genetic properties of pNH601 are reported and compared with those of R6K: conjugative transfer, fertility inhibition of plasmids belonging to other incompatibility groups, incompatibility with plasmid R485 under both non-selective and selective conditions and the integrative suppression of the dnaA ts mutation. The mutant plasmid pNH601 was found to be different from the original R6K in most of these properties.

Suppression of Escherichia coli dnaA46 mutations by integration of plasmid R100.1. derivatives: constraints imposed by the replication terminus

We have studies the phenotypic suppression of a dnaA46 mutation by plasmid integration at preselected chromosomal sites after introducing homologous sequences (Mu prophages) onto both the chromosomes and the suppressive plasmid. The plasmids used were all derived from plasmid R100.1. We found that the conditions required to get viable suppressive integration varied as the plasmid integration site moved from the origin to the terminus of chromosome replication. Two constraints were observed. Both appeared to be linked to the new characteristics acquired by chromosome replication from the integrated plasmid. One constraint was that strains with integrative suppression near the terminus terC were viable only in minimal medium. The rich medium sensitivity of these strains was correlated with a loss of regulation of initiation. The other constraint was a requirement for a specific orientation in certain regions of the chromosome. The two branches defined by normally initiated replication, between oriC and terC, were also symmetrical with respect to these plasmid orientation constraints. In studying the possible reasons for a plasmid orientation constraint, we found that, of the two forks initiated in bidirectional replication from the integrated plasmid, one was capable of moving across the terC region with a higher movability than the other.

Isolation of the kanamycin resistance region (Tn2350) of plasmid R1drd-19 as an autonomous replicon

We have isolated a circular form of Tn2350, an IS1-flanked kanamycin resistance transposon forming part of the plasmid R1drd-19. This circle (pTn2350::9.6 kilobases) contains a single IS1 element and probably arises by recombination between the two directly repeated Is1 sequences of Tn2350. It can be used to transform Escherichia coli to kanamycin resistance. It is capable of autonomous replication but is not maintained stably in dividing cells and segregates under nonselective conditions. Cloning of a segment of pTn2350 on a conditional plasmid vector allowed us to assign the replication functions of this plasmid to a 1.6-kilobase restriction fragment. The plasmid R1drd-19 can thus be considered as a cointegrate between two replicons separated by IS1 sequences.

Formation of Escherichia coli Hfr strains by integrative suppression with the P group plasmid RP1

Hfr strains of Escherichia coli were obtained by integrative suppression of a dnaA(Ts) mutation by the Inc P-1 plasmid RP1 without prior creation of an unnatural homology between the plasmid and the E. coli chromosome. Unmodified RP1 mobilized the polarized transfer of the chromosome in a counterclock-wise direction from a distinct origin between 81 min (pyrE) and 82 min (dnaA) with pyrE as a leading marker. Inheritance of RP1-Hfr chromosomal and antibiotic resistance genes was due to recombination with the recipient chromosome, as shown by the need for a functional recA system. The acquisition of temperature resistance and donor ability was accompanied by the disappearance of free plasmid when the selection pressure for integration was maintained (growth at 41 degrees C); the loss of temperature resistance and donor ability was accompanied by the reappearance of autonomous RP1 when the selection pressure was removed (growth at 30 degrees C).

Production of extrachromosomal r-determinant circles from integrated R100.1: involvement of the E. coli recombination system

The drug resistance plasmid R100.1 can integrate into the E. coli chromosome at several sites on the plasmid. Many of the resulting Hfr strains continuously produce extrachromosomal circular forms of the r-determinant. These r-det 'plasmids' seem incapable of stable autonomous replication. We show that their presence in the cell requires the continuous activity of functional recA and recC genes but does not require the lexA function. The production of r-det circular forms is correlated with an increased copy number of r-det sequences, relative to RTF sequences, This copy number increase is, however, also found in a recA- background where no circular forms of r-det are found. These results show that a specific replication of r-det sequences, not present in the wild-type R100.1 plasmid, occurs in these R-Hfr strains. They suggest that a rec promoted recombination, posterior to the specific replication event, is needed for the production of circular r-det forms.

Host components required for the replication of the resistance plasmid R124 and a copy mutant derivative

The replication of R124, and a copy mutant derivative of it, was measured with respect to dependence on the host DnaA, DnaB, DnaC, DnaE, DnaG, and PolA gene products. Both plasmids replicated under conditions where the DnaA gene product was inactivated or where the polymerising activity of the PolA gene product was reduced. In contrast, neither plasmid replicated to any appreciable extent, if the DnaB, DnaC, DnaE or DnaG gene products were inactivated. R124 integratively suppressed the lesion of the dnaA mutant but the copy mutant derivative had only a very weak suppressing effect. Neither plasmid suppressed the lesions of any of the other dna mutants.

Control of plasmid R1 replication: functions involved in replication, copy number control, incompatibility, and switch-off of replication

A small derivative of plasmid R1 was used to integratively suppress a chromosomal dnaA(Ts) mutation. The strain obtained grew normally at 42 degrees C. The integratively suppressed strain was used as recipient for various plasmid R1 derivatives. Plasmid R1 and miniplasmid derivatives of R1 could be established in the strain that carried an integrated R1 replicon, but they were rapidly lost during growth. However, plasmids also carrying ColE1 replication functions were almost completely stably inherited. The integratively suppressed strain therefore allows the establishment of bacteria diploid with respect to plasmid R1 and forms a useful and sensitive system for studies of interaction between plasmid R1 replication functions. Several of the chimeric plasmids caused inhibition of growth at high temperatures. All plasmids that inhibited growth carried one particular PstI fragment from plasmid R1 (the PstI F fragment), and in all cases the growth inhibition could be ascribed to repression of initiation of chromosome replication at 42 degrees C, i.e., they carry a trans-acting switch-off function. Furthermore, the analogous PstI fragments from different copy mutants of plasmid R1 were analyzed similarly, and one mutant was found to lack the switch-off function. The different chimeric plasmids were also tested for their incompatibility properties. All plasmids that carried the switch-off function (and no other plasmids) also carried R1 incompatibility gene(s). Since the PstI F fragment, which is present on all these plasmids, is very small (0.35 x 10(6)), it is suggested that the switch-off regulation of replication (by an inhibitor), incompatibility, and copy number control are governed by the same gene.

The effects of an Escherichia coli dnaAts mutation on the replication of the plasmids colE1 pSC101, R100.1 and RTF-TC

The rate of replication of the plasmids colE1, pSC101, R100.1 and pAR132 (an RTF-TC derivative of the drug resistance factor R100.1) has been investigated directly by DNA:DNA hybridization. These rates have been compared, in a dnaAts strain, to that of various markers of the host chromosome at permissive and non-permissive temperatures. Chromosome initiation in the dnaAts strain stops rapidly after a shift to the non-permissive temperature, but plasmids R100.1 and pAR132 do not seem to be affected directly and continue replication for some time. The colE1 replication rate undergoes a large increase after the temperature shift, followed by a rapid decrease to a very low level 25 min after the shift. In contrast pSC101 replication stops immediately after the shift. ColE1 is able to replicate in an integratively suppressed dnaAts strain at 42 degrees C whereas pSC101 stops replication immediately under these conditions. We conclude that R100.1 and its derivative RTF-TC can replicate without a functional dnaA product; that colE1, while affected by a shift in temperature in a dnaAts strain, does not directly require dnaA; and that the plasmid pSC101 has an absolute requirement for dnaA. The absolute requirement of pSC101 for dnaA in the integratively suppressed Hfr strain provides a useful system for further investigation of the dnaA function.

Tn10 mediated integration of the plasmid R100.1 into the bacterial chromosome: inverse transposition

Upon integration into the bacterial chromosome the drug resistance plasmid R100.1 often loses its tetracycline resistance character. We have analyzed an Hfr strain formed by such an integration and an R-prime plasmid derived from it. We find that integration took place within the Tn10 transposon, that the two IS10 sequences were retained, but that at least 80% of the transposon segment located between them, and carrying the tetracycline resistance genes, had been lost. We suggest that integration of R100.1 was mediated by an inverse transposition using the IS10 sequences.

Chromosome replication in an Escherichia coli dnaA mutant integratively suppressed by prophage P2

Escherichia coli CRT4624-P2sig5 is a dnaA mutant in which integration of the prophage P2sig5 has occurred at the attP2II site (min 85). This strain was integratively suppressed, and when cells were shifted to 42 degrees C replication was initiated at a site in or near the P2 prophage. Initially, this replication occurred primarily in the direction that corresponds to the clockwise direction on the genetic map. Replication also occurred in the counterclockwise direction, but the initiation of replication in this direction occurred approximately 40 min later than the initiation of replication in the other direction. Because of this delay, the replication forks that traveled in the clockwise direction were the first to arrive in the region of the replication terminus. These replication forks ceased replication near the aroD locus (min 37), and it is proposed that the replication terminus is between the aroD and rac loci (min 31). A model is proposed for the cycle of chromosome replication in this strain at 42 degrees C.

Map position of the replication origin on the E. coli chromosome

Strains carrying a dnaA temperature sensitive (t.s.) mutation and a Mu-1 prophage inserted within different genes near the origin of replication have been constructed. For each strain, integratively suppressed Hfrs, named G and D in which the ori region was replicated clockwise and counterclockwise respectively, were isolated. The strand preferences of Mu-1 specific Okazaki fragments were subsequently determined for each t.s. strain and its Hfr derivatives. Their comparison led us to establish the direction of replication of the Mu-1 marker from ori. The site ori was confined to the bglB-C--rbsK-P interval.