Isolation and characterization of antibiotic resistance plasmids from thermophilic bacilli and construction of deletion plasmids

Genetic Tools and Techniques for Recombinant Expression in Thermophilic Bacillaceae

Although Escherichia coli and Bacillus subtilis are the most prominent bacterial hosts for recombinant protein production by far, additional species are being explored as alternatives for production of difficult-to-express proteins. In particular, for thermostable proteins, there is a need for hosts able to properly synthesize, fold, and excrete these in high yields, and thermophilic Bacillaceae represent one potentially interesting group of microorganisms for such purposes. A number of thermophilic Bacillaceae including B.methanolicus, B.coagulans, B.smithii, B.licheniformis, Geobacillus thermoglucosidasius, G. kaustophilus, and G. stearothermophilus are investigated concerning physiology, genomics, genetic tools, and technologies, altogether paving the way for their utilization as hosts for recombinant production of thermostable and other difficult-to-express proteins. Moreover, recent successful deployments of CRISPR/Cas9 in several of these species have accelerated the progress in their metabolic engineering, which should increase their attractiveness for future industrial-scale production of proteins. This review describes the biology of thermophilic Bacillaceae and in particular focuses on genetic tools and methods enabling use of these organisms as hosts for recombinant protein production.

Gestational diabetes mellitus alters apoptotic and inflammatory gene expression of trophobasts from human term placenta

AIM

Increased placental growth secondary to reduced apoptosis may contribute to the development of macrosomia in GDM pregnancies. We hypothesize that reduced apoptosis in GDM placentas is caused by dysregulation of apoptosis related genes from death receptors or mitochondrial pathway or both to enhance placental growth in GDM pregnancies.

METHODS

Newborn and placental weights from women with no pregnancy complications (controls; N=5), or with GDM (N=5) were recorded. Placental villi from both groups were either fixed for TUNEL assay, or snap frozen for gene expression analysis by apoptosis PCR microarrays and qPCR.

RESULTS

Maternal, placental and newborn weights were significantly higher in the GDM group vs. Controls. Apoptotic index of placentas from the GDM group was markedly lower than the Controls. At a significant threshold of 1.5, seven genes (BCL10, BIRC6, BIRC7, CASP5, CASP8P2, CFLAR, and FAS) were down regulated, and 13 genes (BCL2, BCL2L1, BCL2L11, CASP4, DAPK1, IκBκE, MCL1, NFκBIZ, NOD1, PEA15, TNF, TNFRSF25, and XIAP) were unregulated in the GDM placentas. qPCR confirmed the consistency of the PCR microarray. Using Western blotting we found significantly decreased placental pro-apoptotic FAS receptor and FAS ligand (FASL), and increased mitochondrial anti-apoptotic BCL2 post GDM insult. Notably, caspase-3, which plays a central role in the execution-phase of apoptosis, and its substrate poly (ADP-ribose) polymerase (PARP) were significantly down regulated in GDM placentas, as compared to non-diabetic Control placentas.

CONCLUSION

Maternal GDM results in heavier placentas with aberrant placental apoptotic and inflammatory gene expression that may account, at least partially, for macrosomia in newborns.

Recombinational transfer of 100-kilobase genomic DNA to plasmid in Bacillus subtilis 168

Transformation of Bacillus subtilis by a plasmid requires a circular multimeric form. In contrast, linearized plasmids can be circularized only when homologous sequences are present in the host genome. A recombinational transfer system was constructed with this intrinsic B. subtilis recombinational repair pathway. The vector, pGETS103, a derivative of the theta-type replicating plasmid pTB19 of thermophilic Bacillus, had the full length of Escherichia coli plasmid pBR322. A multimeric form of pGETS103 yielded tetracycline-resistant transformants of B. subtilis. In contrast, linearized pGETS103 gave tetracycline-resistant transformants only when the recipient strain had the pBR322 sequence in the genome. The efficiency and fidelity of the recombinational transfer of DNAs of up to 90 kb are demonstrated.

Distribution and diversity of symbiotic thermophiles, Symbiobacterium thermophilum and related bacteria, in natural environments

Symbiobacterium thermophilum is a tryptophanase-positive thermophile which shows normal growth only in coculture with its supporting bacteria. Analysis of the 16S rRNA gene (rDNA) indicated that the bacterium belongs to a novel phylogenetic branch at the outermost position of the gram-positive bacterial group without clustering to any other known genus. Here we describe the distribution and diversity of S. thermophilum and related bacteria in the environment. Thermostable tryptophanase activity and amplification of the specific 16S rDNA fragment were effectively employed to detect the presence of Symbiobacterium. Enrichment with kanamycin raised detection sensitivity. Mixed cultures of thermophiles containing Symbiobacterium species were frequently obtained from compost, soil, animal feces, and contents in the intestinal tracts, as well as feeds. Phylogenetic analysis and denaturing gradient gel electrophoresis of the specific 16S rDNA amplicons revealed a diversity of this group of bacteria in the environment.

Identification of the genes encoding Mn2+-dependent RNase HII and Mg2+-dependent RNase HIII from Bacillus subtilis: classification of RNases H into three families

Database searches indicated that the genome of Bacillus subtilis contains three different genes encoding RNase H homologues. The ypdQ gene encodes an RNase HI homologue with 132 amino acid residues, whereas the rnh and ysgB genes encode RNase HII homologues with 255 and 313 amino acid residues, respectively. RNases HI and HII show no significant sequence similarity. These genes were individually expressed in Escherichia coli; the recombinant proteins were purified, and their enzymatic properties were compared with those of E. coli RNases HI and HII. We found that the ypdQ gene product showed no RNase H activity. The 2.2 kb pair genomic DNA containing this gene did not suppress the RNase H deficiency of an E. coli rnhA mutant, indicating that this gene product shows no RNase H activity in vivo as well. In contrast, the rnh (rnhB) gene product (RNase HII) showed a preference for Mn2+, as did E. coli RNase HII, whereas the ysgB (rnhC) gene product (RNase HIII) exhibited a Mg2+-dependent RNase H activity. Oligomeric substrates digested with these enzymes indicate similar recognition of these substrates by B. subtilis and E. coli RNases HII. Likewise, B. subtilis RNase HIII and E. coli RNase HI have generated similar products. These results suggest that B. subtilis RNases HII and HIII may be functionally similar to E. coli RNases HII and HI, respectively. We propose that Mn2+-dependent RNase HII is universally present in various organisms and Mg2+-dependent RNase HIII, which may have evolved from RNase HII, functions as a substitute for RNase HI.

[Thermophilic bacteria resistant to antibiotics in traditional public baths]

Three thermophilic bacteria strains, designated strain BS1, BS2 and BS3, resistant to beta-lactam antibiotics, and leaving at an optimal temperature for growth of about 50 degrees C, were isolated from traditional baths in Meknes-city in Morocco. Physiological and biochemical studies showed that these organisms belong to Gram positive Bacilli. They could not be identified with the Bergey's Manuel of Systematic Bacteriology (1986). The dosage of beta-lactamase during the exponential growth phase has revealed that the strain BS3 produces a maximal amount of this enzyme. Studies aimed at determining the optimal conditions for incubation and growth have been performed in order to optimize the excretion of beta-lactamase by BS3 cells and thus facilitate the purification and and characterization of this enzyme.

Transposon mutagenesis and cloning of the genes encoding the enzymes of fengycin biosynthesis in Bacillus subtilis

A total of 20 Bacillus subtilis F29-3 mutants defective in fengycin biosynthesis was obtained by Tn917 mutagenesis. Cloning and mapping results showed that the transposon in these mutants was inserted in eleven different locations on the chromosome. We were able to use the chromosomal sequence adjacent to the transposon as a probe to screen for cosmid clones containing the fengycin biosynthesis genes. One of the clones obtained, pFC660, was 46 kb long. Eight transposon insertion sites were mapped within this plasmid. Among the eleven different mutants analyzed, four mutants had Tn917 inserted in regions which encoded peptide sequences similar to part of gramicidin S synthetase, surfactin synthetase, and tyrocidine synthetase. Our results suggest that fengycin is synthesized nonribosomally by the multienzyme thiotemplate mechanism.

Cloning of the aapT gene and characterization of its product, alpha-amylase-pullulanase (AapT), from thermophilic and alkaliphilic Bacillus sp. strain XAL601

A thermophilic and alkaliphilic Bacillus sp. strain, XAL601, was isolated from soil. It produces a thermostable and alkaline-stable enzyme with both alpha-amylase and pullulanase activities. The alpha-amylase-pullulanase gene (aapT) from this Bacillus strain was cloned, and its nucleotide sequence was determined (GenBank accession number D28467). A very large open reading frame composed of 6,096 bases, which encodes 2,032 amino acid residues with an M(r) of 224,992, was found. The deduced amino acid sequence revealed that the four highly conserved regions that are common among amylolytic enzymes were well conserved. These include an active center and common substrate-binding sites of various amylases. In the C-terminal region, a six-amino-acid sequence (Gly-Ser-Gly-Thr-Thr-Pro) is repeated 12 times. The aapT gene was then subcloned in Escherichia coli and overexpressed under the control of the lac promoter. Purification of AapT from this recombinant E. coli was performed, and it was shown that the aapT gene product exhibits both alpha-amylase and pullulanase activities with one active site. The optimum temperature and pH for enzyme activity were found to be 70 degrees C and pH 9, respectively. Furthermore, AapT was found to strongly adsorb to crystalline cellulose (Avicel) and raw corn starch. Final hydrolyzed products from soluble starch range from maltose (G2) to maltotetraose (G4). Only maltotriose (G3) was produced from pullulan. The enzyme also hydrolyzes raw starch under a broad range of conditions (60 to 70 degrees C and pH 8 to 9).

Stabilization and rational design of serine protease AprM under highly alkaline and high-temperature conditions

Rational shift of the optimum pH toward alkalinity and enhancement of thermostability were investigated by using a thermostable extremely alkaline protease (optimum pH, 12 to 13) from the alkaliphilic and thermophilic Bacillus sp. strain B18'. The protease gene (aprM) was cloned, and the sequence analysis revealed an open reading frame of 361 amino acids that was composed of a putative signal sequence (24 amino acids), a prosequence (69 amino acids), and a mature enzyme (268 amino acids) (molecular weight, 27,664). The amino acid sequence of this protease was compared with those of other serine proteases. A direct correlation of higher optimum pH with an increase in the number of arginine residues was observed. An even more thermostable mutant enzyme was created by introducing a point mutation. When the position of the beta-turn, Thr-203, was replaced by Pro, the residual activity of this mutant enzyme at 80 degrees C for 30 min was higher than that of the wild-type enzyme (50% versus 10%). The specific activity of this mutant enzyme at 70 degrees C was 105% of that of the wild-type enzyme under nondenaturation condition. These data suggest that the higher content of Arg residues favors the alkalinity of the serine protease and that introduction of a Pro residue into the beta-turn structure stabilizes the enzyme.

The primary structure of branched-chain alpha-oxo acid dehydrogenase from Bacillus subtilis and its similarity to other alpha-oxo acid dehydrogenases

The bfmB mutant of Bacillus subtilis requires branched short-chain carboxylic acids for growth because the organism is known to be defective in branched-chain alpha-oxo acid dehydrogenase. The DNA in the region of bfmB has now been cloned and sequenced, and the gene has been analyzed. The results show that there are three open reading frames in the area, each of which is preceded by a putative ribosome binding site, and the last of which is followed by a putative transcription termination site with inverted repeats. The amino acid sequences deduced by analysis of the reading frames are highly similar (with 32-49% identity) to the E1 alpha, El beta and E2 components of pyruvate, 2-oxoglutarate and branched-chain alpha-oxo acid dehydrogenases from different sources. The thiamin diphosphate binding, putative subunit interaction and phosphorylation sites of the E1 alpha of four reported branched-chain alpha-oxo acid dehydrogenases from different sources are very similar to those of the first open reading frame (E1 alpha) of bfmB. A similar result is also obtained with the lipoyl-binding site (lysine) and its domain of the E2 component of alpha-oxo acid dehydrogenases from different sources. The present data, along with the reported biochemical data, lead to the conclusion that bfmB encodes a branched-chain alpha-oxo acid dehydrogenase, which is composed of E1 alpha, E1 beta and E2 genes. This organization is identical to that of the 2-oxoglutarate dehydrogenase in B. subtilis.

Plasmid pTB913 derivatives are segregationally stable in Bacillus subtilis at elevated temperatures

We studied the effects of temperature on the segregational stability of derivatives of the rolling-circle-type plasmid pTB913 in Bacillus subtilis. This 4.5-kb plasmid is a deletion derivative of pTB19, which was originally isolated from a thermophilic Bacillus. pTB913 derivatives carrying large inserts or lacking the minus origin for complementary strand synthesis were segregationally unstable at 37 degrees C. In contrast, at 47 degrees C all pTB913 derivatives tested were stably maintained in B. subtilis. The increased stability at 47 degrees C was attributed, at least partly, to increased copy numbers at this temperature. Although considerable amounts of single-stranded and high-molecular-weight plasmid DNA were formed at 47 degrees C, these products did not reduce plasmid stability at this temperature. The increased stability and increased copy number of pTB913 at elevated temperatures extend the use of this plasmid as a cloning vector in B. subtilis and other bacilli.

The integrated state of the rolling-circle plasmid pTB913 in the composite Bacillus plasmid pTB19

pTB19, a 27 kb plasmid originating from a thermophilic Bacillus species, contains integrated copies of two rolling-circle type plasmids on a 10.6 kb DNA fragment. In the present study we analysed the part of pTB19 that contains the rolling-circle plasmid pTB913 and the region in between the two rolling-circle plasmids. We show that, in the integrated state, pTB913 was flanked by a 55 bp direct repeat that duplicated part of the replication initiation gene repB. Since repB was interrupted, the integrated pTB913 could not initiate rolling-circle replication. Autonomously replicating pTB913 was produced from pTB19, probably through recombination between the 55 bp direct repeats; this was a rare event. Since the second integrated rolling-circle type plasmid also contained a non-functional replication initiation gene, replication of pTB19 must be controlled by the RepA determinant. Theta-type replication, controlled by RepA is likely to account for the high stability of pTB19. In between the two integrated rolling-circle plasmids was present an open reading frame (447 codons) which could encode a protein of unknown function.

Molecular cloning of a subtilisin J gene from Bacillus stearothermophilus and its expression in Bacillus subtilis

The structural gene for a subtilisin J from Bacillus stearothermophilus NCIMB10278 was cloned in Bacillus subtilis using pZ124 as a vector, and its nucleotide sequence was determined. The nucleotide sequence revealed only one large open reading frame, composed of 1,143 base pairs and 381 amino acid residues. A Shine-Dalgarno sequence was found 8 bp upstream from the translation start site (GTG). The deduced amino acid sequence revealed an N-terminal signal peptide and pro-peptide of 106 residues followed by the mature protein comprised of 275 residues. The productivity of subtilisin in the culture broth of the Bacillus subtilis was about 46-fold higher than that of the Bacillus stearothermophilus. The amino acid sequence of the extracellular alkaline protease subtilisin J is highly homologous to that of subtilisin E and it shows 69% identity with subtilisin Carlsberg, 89% with subtilisin BPN' and 70% with subtilisin DY. Some properties of the subtilisin J that had been purified from the Bacillus subtilis were examined. The subtilisin J has alkaline pH characteristics and a molecular weight of 27,500. It retains about 50% of its activity even after treatment at 60 degrees C for 30 min in the presence of 2 mM calcium chloride.

Cloning and sequencing of the gene coding for alcohol dehydrogenase of Bacillus stearothermophilus and rational shift of the optimum pH

Using Bacillus subtilis as a host and pTB524 as a vector plasmid, we cloned the thermostable alcohol dehydrogenase (ADH-T) gene (adhT) from Bacillus stearothermophilus NCA1503 and determined its nucleotide sequence. The deduced amino acid sequence (337 amino acids) was compared with the sequences of ADHs from four different origins. The amino acid residues responsible for the catalytic activity of horse liver ADH had been clarified on the basis of three-dimensional structure. Since those catalytic amino acid residues were fairly conserved in ADH-T and other ADHs, ADH-T was inferred to have basically the same proton release system as horse liver ADH. The putative proton release system of ADH-T was elucidated by introducing point mutations at the catalytic amino acid residues, Cys-38 (cysteine at position 38), Thr-40, and His-43, with site-directed mutagenesis. The mutant enzyme Thr-40-Ser (Thr-40 was replaced by serine) showed a little lower level of activity than wild-type ADH-T did. The result indicates that the OH group of serine instead of threonine can also be used for the catalytic activity. To change the pKa value of the putative system, His-43 was replaced by the more basic amino acid arginine. As a result, the optimum pH of the mutant enzyme His-43-Arg was shifted from 7.8 (wild-type enzyme) to 9.0. His-43-Arg exhibited a higher level of activity than wild-type enzyme at the optimum pH.

Design of temperature-sensitive penicillinase repressors by replacement of Pro in predicted beta-turn structures

Pro residues in predicted beta-turn structures were substituted with other amino acids to obtain temperature-sensitive penicillinase repressors (PenI). A mutant repressor (P70L; Pro-70 is substituted with Leu) was inactive at 48 degrees C and penP gene expression was derepressed (1,200 U/OD660 [optical density at 660 nm] ), although the mutant was still active at 30 degrees C (27 U). The heat induction ratio (penicillinase activity at 48 degrees C compared with that at 30 degrees C) of the mutant was 98 times higher than that of the wild type (i.e., 44 versus 0.45). This result indicated that the side chain of the Leu residue in P70L destroyed the proper folding of the repressor protein at the elevated temperature, whereas the Pro residue of the wild-type repressor stabilized this predicted beta-turn structure even at 48 degrees C. When the Pro residue was replaced by amino acid residues with smaller side chains (i.e., Gly and Ala), these mutant repressors were less temperature sensitive than P70L. These data suggest that the presence of the Pro residue in the beta-turn structure could be one of the key factors in stabilizing protein structure at elevated temperatures.

Cloning and nucleotide sequencing of a novel 7 beta-(4-carboxybutanamido)cephalosporanic acid acylase gene of Bacillus laterosporus and its expression in Escherichia coli and Bacillus subtilis

A strain of Bacillus species which produced an enzyme named glutaryl 7-ACA acylase which converts 7 beta-(4-carboxybutanamido)cephalosporanic acid (glutaryl 7-ACA) to 7-amino cephalosporanic acid (7-ACA) was isolated from soil. The gene for the glutaryl 7-ACA acylase was cloned with pHSG298 in Escherichia coli JM109, and the nucleotide sequence was determined by the M13 dideoxy chain termination method. The DNA sequence revealed only one large open reading frame composed of 1,902 bp corresponding to 634 amino acid residues. The deduced amino acid sequence contained a potential signal sequence in its amino-terminal region. Expression of the gene for glutaryl 7-ACA acylase was performed in both E. coli and Bacillus subtilis. The enzyme preparations purified from either recombinant strain of E. coli or B. subtilis were shown to be identical with each other as regards the profile of sodium dodecyl sulfate-polyacrylamide gel electrophoresis and were composed of a single peptide with the molecular size of 70 kDa. Determination of the amino-terminal sequence of the two enzyme preparations revealed that both amino-terminal sequences (the first nine amino acids) were identical and completely coincided with residues 28 to 36 of the open reading frame. Extracellular excretion of the enzyme was observed in a recombinant strain of B. subtilis.

Plasmids in Bacillus stearothermophilus coding for bacteriocinogeny and temperature resistance

Obligately thermophilic strains of Bacillus stearothermophilus were screened for the presence of plasmids by agarose gel electrophoresis. All strains in our collection contained large plasmids (20 x 10(6)-80 x 10(6)) and were divided into four groups with respect to their plasmid pattern and production of bacteriocins. The major plasmid species were designated pSE407 (38.7 x 10(6)), pSE409 (29.0 x 10(6)), pSE411 (21.5 x 10(6)), and pSE410 (23.5 x 10(6)). Their physical endonuclease maps were constructed, and by Southern blots and hybridizations it was shown that these plasmids were related. From curing experiments and electrotransformations (electroporations) we conclude that pSE407, pSE410, and pSE411 code for temperature resistance. In addition pSE410 codes for bacteriocin production and resistance. Plasmid pSE409 probably also codes for bacteriocin production and resistance.

The large Bacillus plasmid pTB19 contains two integrated rolling-circle plasmids carrying mobilization functions

Plasmid pTB19 is a 27-kb plasmid originating from a thermophilic Bacillus species. It was shown previously that pTB19 contains an integrated copy of the rolling-circle type plasmid pTB913. Here we describe the analysis of a 4324-bp region of pTB19 conferring resistance to tetracycline. The nucleotide sequence of this region revealed all the characteristics of a second plasmid replicating via the rolling-circle mechanism. This sequence contained (i) the tetracycline resistance marker of pTB19, which is highly similar to other tetL-genes of gram-positive bacteria; (ii) a hybrid mob gene, which bears relatedness to both the mob-genes of pUB110 and pTB913; (iii) a palU type minus origin identical to those of pUB110 and pTB913; and (iv) a plus origin of replication similar to that of pTB913. A repB-type replication initiation gene sequence identical to that of pTB913 was present, which lacked the middle part (492 bp), thus preventing autonomous replication of this region. The hybrid mob gene was functional in conjugative mobilization of plasmids between strains of Bacillus subtilis.

A limited number of Bacillus subtilis strains carry a tetracycline-resistance determinant at a site close to the origin of replication

Several strains of Bacillus subtilis, e.g., 168 derivatives and R, were found to carry a single copy of a tetracycline-resistance (TcR) determinant (named tetBS908) at a site close to the origin of replication on the chromosome. This gene is highly homologous (80% identical) to the TcR determinant of plasmids widely dispersed among aerobic spore-forming bacilli. B. subtilis RM125 (168 strain) transformants which carry a varying number of tetBS908 sequences in a tandem array on the chromosome were constructed and examined for their TcR level. A nearly proportional relationship between the TcR level and copy number of tetBS908 existed.

Kinetics of growth and metabolism of Clostridium thermosaccharolyticum culture. Isolation and characteristics of its plasmids

The kinetics of growth and metabolism of Clostridium thermosaccharolyticum DSM 571 has been studied at varying initial pH and glucose concentration. A weak inhibitory effect of excess glucose on the specific growth rate has been shown. The effect of antibiotics of various classes on culture growth and hydrogen evolution has been studied. Streptomycin and kanamycin resistance of this culture has been revealed as well as the phenomenon of increased hydrogen production in the presence of the above antibiotics. New plasmids, pNB1 (4.9 kb) and pNB2 (2.0 kb), were isolated from C. thermosaccharolyticum DSM 571. The restriction analysis of pNB1 and pNB2 has been performed.

Cloning and nucleotide sequences of the Bacillus stearothermophilus neutral protease gene and its transcriptional activator gene

Both the neutral protease gene (nprS) and its transcriptional activator gene (nprA) from Bacillus stearothermophilus TELNE were cloned in Bacillus subtilis by using pTB53 as a vector plasmid. The presence of the nprA gene enhanced protease synthesis by about fivefold. The nucleotide sequences of nprS and its flanking regions were determined. nprS was composed of 1,653 base pairs and 551 amino acid residues. A Shine-Dalgarno (SD) sequence was found 9 bases upstream from the translation start site (ATG). The deduced amino acid sequence was very similar to that of another thermostable neutral protease gene, nprM (M. Kubo and T. Imanaka, J. Gen. Microbiol. 134:1883-1892, 1988). the amino acid sequence of the extracellular neutral protease NprS was completely identical to that of NprM. By deletion analysis and substitution of the original promoter with a foreign promoter, it was found that the nprA gene existed upstream of nprS. It was also found that a possible target region (palindromic sequence) of the gene product of nprA existed near the promoter sequence of nprS. The nucleotide sequences of nprA and its flanking regions were determined. The DNA sequence revealed only one large open reading frame, composed of 1,218 base pairs (406 amino acids; molecular weight, 49,097). The SD sequence was found 4 bases upstream from the translation start site (GTG). A possible promoter sequence (TTGAAG for the -35 region and AATTTT for the -10 region) was also found about 20 bases upstream of the SD sequence. The nprA gene was separated from nprS by a typical terminator sequence. By constructing an in-frame fusion between the lacZ gene and the 5' region of the nprA gene, it was demonstrated that the coding region of nprA was indeed translated in vivo. Three palindromic sequences, which were highly homologous with a possible target region by NprA, were also found in the 5' region of the nprA gene. This suggests that eh expression of nprA is autoregulated. From the time course of the production of NprA-LacZ fusion protein, it was indicated that nprA was expressed in late log phase, whereas nprS was expressed in the stationary phase. The NprA protein had consensus regions homologous to the DNA recognition domains of DNA-binding proteins but showed no sequence homology with any other regulatory proteins for protease production. It is inferred that NprA protein binds to the upstream region of nprS promoter and activates transcription of nprS. A new regulatory mechanism by the nprA-nprS genes is discussed.

Cloning and expression of the Clostridium thermosulfurogenes glucose isomerase gene in Escherichia coli and Bacillus subtilis

The gene that encodes thermostable glucose isomerase in Clostridium thermosulfurogenes was cloned by complementation of glucose isomerase activity in a xylA mutant of Escherichia coli. A new assay method for thermostable glucose isomerase activity on agar plates, using a top agar mixture containing fructose, glucose oxidase, peroxidase, and benzidine, was developed. One positive clone, carrying plasmid pCGI38, was isolated from a cosmid library of C. thermosulfurogenes DNA. The plasmid was further subcloned into a Bacillus cloning vector, pTB523, to generate shuttle plasmid pMLG1, which is able to replicate in both E. coli and Bacillus subtilis. Expression of the thermostable glucose isomerase gene in both species was constitutive, whereas synthesis of the enzyme in C. thermosulfurogenes was inducible by D-xylose. B. subtilis and E. coli produced higher levels of thermostable glucose isomerase (1.54 and 0.46 U/mg of protein, respectively) than did C. thermosulfurogenes (0.29 U/mg of protein). The glucose isomerases synthesized in E. coli and B. subtilis were purified to homogeneity and displayed properties (subunit Mr, 50,000; tetrameric molecular structure; thermostability; metal ion requirement; and apparent temperature and pH optima) identical to those of the native enzyme purified from C. thermosulfurogenes. Simple heat treatment of crude extracts from E. coli and B. subtilis cells carrying the recombinant plasmid at 85 degrees C for 15 min generated 80% pure glucose isomerase. The maximum conversion yield of glucose (35%, wt/wt) to fructose with the thermostable glucose isomerase (10.8 U/g of dry substrate) was 52% at pH 7.0 and 70 degrees C.

Novel plasmid marker rescue transformation system for molecular cloning in Bacillus subtilis enabling direct selection of recombinants

A versatile plasmid marker rescue transformation system was developed for homology-facilitated cloning in Bacillus subtilis. It is based on the highly efficient host-vector system 6GM15-pHPS9, which allows the direct selection of recombinants by means of beta-galactosidase alpha-complementation. The system offers several advantages over previously described cloning systems: (1) the convenient direct selection of recombinants; (2) the ability to effectively transform B. subtilis competent cells with plasmid monomers, which allows the forced cloning of DNA fragments with high efficiency; (3) the availability of 6 unique target sites, which can be used for direct clone selection, SphI, NdeI, NheI, BamHI, SmaI and EcoRI; and (4) the rapid segregational loss of the helper plasmid from the transformed cells.

Nucleotide sequence and cloning in Bacillus subtilis of the Bacillus stearothermophilus pleiotropic regulatory gene degT

The regulatory gene (degT) from Bacillus stearothermophilus NCA1503 which enhanced production of extracellular alkaline protease (Apr) was cloned in Bacillus subtilis with pTB53 as a vector. When B. subtilis MT-2 (Npr- [deficiency of neutral protease] Apr+) was transformed with the recombinant plasmid, pDT145, the plasmid carrier produced about three times more alkaline protease than did the wild-type strain. In contrast, when B. subtilis DB104 (Npr- Apr-) was used as a host, the transformant with pDT145 could not exhibit any protease activity. After construction of the deletion plasmids, DNA sequencing was done. A large open reading frame was found, and nucleotide sequence analysis showed that the degT gene was composed of 1,116 bases (372 amino acid residues, molecular weight of 41,244). A Shine-Dalgarno sequence was found nine bases upstream from the open reading frame. A B. subtilis strain carrying degT showed the following pleiotropic phenomena: (i) enhancement of production of extracellular enzymes such as alkaline protease and levansucrase, (ii) repression of autolysin activity, (iii) decrease of transformation efficiency for B. subtilis (competent cell procedure), (iv) altered control of sporulation, (v) loss of flagella, and (vi) abnormal cell division. When B. stearothermophilus SIC1 was transformed with the recombinant plasmid carrying degT, the transformants exhibited abnormal cell division. These phenomena are similar to those of the phenotypes of degSU(Hy) (hyperproduction), degQ(Hy), and degR mutants of B. subtilis. However, the amino acid sequence of the degT product (DegT) is different from those of the reported gene products. Furthermore, DegT includes a hydrophobic core region in the N-terminal portion (amino acid numbers 50 to 160), a consensus sequence for a DNA binding region (amino acid numbers 160 to 179), and a region homologous to transcription activator proteins (amino acid numbers 351 to 366). We discuss the possibility that the membrane protein DegT functions as a sensor protein and transfers the signal of environmental stimuli to the regulatory region of target genes to activate or repress transcription of the genes.

Expression of the insecticidal protein gene from Bacillus thuringiensis subsp. aizawai in Bacillus subtilis and in the thermophile Bacillus stearothermophilus by using the alpha-amylase promoter of the thermophile

Expression of the insecticidal protein gene from Bacillus thuringiensis subsp. aizawai IPL7 in B. subtilis MI113 and B. stearothermophilus SIC1 was examined. Production of the protein (130 kilodaltons [KDa]) was analyzed by its reaction with antibody against the insecticidal proteins of the parental B. thuringiensis. When the original gene containing its own promoter was subcloned in B. subtilis, only a small amount of the protein was produced. Therefore, both the promoter for the B. stearothermophilus alpha-amylase gene and the insecticidal protein gene were inserted in a repA (low-copy-number) plasmid to yield the recombinant plasmid pTBT-Pamy. B. subtilis MI113 carrying pTBT-Pamy produced more of the 130-kDa protein (about 10(4) molecules per cell) at 37 degrees C. In contrast, B. stearothermophilus SIC1 carrying pTBT-Pamy produced a small amount of 130-kDa protein (10(2) to 10(3) molecules per cell) at 55 degrees C.

Similarity of minus origins of replication and flanking open reading frames of plasmids pUB110, pTB913 and pMV158

Plasmids pMV158 and pTB913, originating from Streptococcus agalactiae and a thermophilic Bacillus respectively, were sequenced to completion. Both contained a BA3-type minus origin of replication and an RSA-site, believed to constitute a site-specific recombination site. These two regions were more than 99% homologous to the corresponding regions of the Staphylococcus aureus plasmid pUB110. Deleting the BA3-type minus origin resulted in the accumulation of a considerable amount of single-stranded DNA, both in L. lactis subsp. lactis and B. subtilis, indicating that this minus origin was functional in both bacterial species. Like pUB110, both plasmids contained an open reading frame encoding a putative plasmid recombination enzyme (Pre protein), which was located downstream of the RSA-site. On the basis of sequence comparisons between pUB110, pMV158, pTB913, pT181, pE194, pNE131 and pT48 two distinct families of RSA-sites and Pre proteins could be distinguished.

mRNA secondary structure in an open reading frame reduces translation efficiency in Bacillus subtilis

The structural gene for thermostable neutral protease, nprM, has only one stacking region, whose energy is -16.3 kcal/mol (-68.2 kJ/mol). Mutations for increasing (-30.8 kcal/mol [128.9 kJ/mol] and decreasing (-5.0 kcal/mol [-20.9 kJ/mol]) the energy of the stacking region were introduced in nprM on the recombinant plasmid pMK1 by using site-directed mutagenesis without any amino acid substitutions. The resultant plasmids were designated pMK2 and pMK3, respectively. The enzyme productivity of the pMK2 carrier was about 40% lower than that of pMK1, whereas the productivity of the pMK3 carrier was about 5% higher. The higher the stability of the stacking regions, the lower the enzyme productivity that was observed. mRNA concentrations were almost the same in the cells harboring these three plasmids. These results indicate that the secondary structure of mRNA reduces the translation efficiency.