Sequence homology between the subunits of two immunologically and functionally distinct types of fimbriae of Actinomyces spp

An in vitro evaluation of hydrolytic enzymes as dental plaque control agents

The plaque-control potential of commercially available amylase, lipase and protease was evaluated by observing their effects on coaggregation and on bacterial viability within various plaque microcosms. A quantitative coaggregation assay indicated that protease significantly inhibited the extent of coaggregation of Actinomyces naeslundii and Streptococcus oralis (P <0.05) and of Porphyromonas gingivalis and S. oralis. Amylase significantly (P <0.05) increased the coaggregation of A. naeslundii versus Fusobacterium nucleatum and A. naeslundii versus P. gingivalis. Concomitant challenge of constant-depth film fermenter-grown plaques with the enzymes did not result in detectable ecological perturbations (assessed by differential culture and denaturing gradient gel electrophoresis). Similar dosing and analysis of multiple Sorbarod devices did not reveal increases in bacterial dispersion which could result from disaggregation of extant plaques. A short-term hydroxyapatite colonization model was therefore used to investigate possible enzyme effects on early-stage plaque development. Whilst culture did not indicate significant reductions in adhesion or plaque accumulation, a vital visual assay revealed significantly increased aggregation frequency following enzyme exposure. In summary, although hydrolytic enzymes negatively influenced binary coaggregation, they did not cause statistically significant changes in bacterial viability within plaque microcosms. In contrast, enzyme exposure increased aggregation within extant plaques.

Assembly and role of pili in group B streptococci

Streptococcus agalactiae[group B streptococcus (GBS)] is the leading cause of neonatal pneumonia, sepsis and meningitis. An in silico genome analysis indicated that GBS strain NEM316 encodes five putative sortases, including the major class A sortase enzyme and four class C sortases. The genes encoding the class C sortases are tandemly arranged in two different loci, srtC1-C2 and srtC3-C4, with a similar genetic organization and are thought to be involved in pilus biosynthesis. Each pair of sortase genes is flanked by LPXTG protein encoding genes, two upstream and one downstream, and a divergently transcribed regulatory gene located upstream from this locus. We demonstrated that strain NEM316 expresses only the srtC3-C4 locus, which encodes three surface proteins (Gbs1474, Gbs1477 and Gbs1478) that polymerize to form appendages resembling pili. Structural and functional analysis of this locus revealed that: (i) the transcriptional activator RogB is required for expression of the srtC3-C4 operon; (ii) Gbs1477, and either SrtC3 or SrtC4 are absolutely required for pilus biogenesis; and (iii) GBS NEM316 pili are composed of three surface proteins, Gbs1477, the bona fide pilin which is the major component, Gbs1474, a minor associated component, and Gbs1478, a pilus-associated adhesin. Surprisingly, pilus-like structures can be formed in the absence of the two minor components, i.e. the putative anchor Gbs1474 or the adhesin Gbs1478. Adherence assays showed that Gbs1478 confers adhesive capacity to the pilus. This study provides the first evidence that adhesive pili are also present in Gram-positive pathogens.

Sequence analyses of fimbriae subunit FimA proteins on Actinomyces naeslundii genospecies 1 and 2 and Actinomyces odontolyticus with variant carbohydrate binding specificities

Background

Actinomyces naeslundii genospecies 1 and 2 express type-2 fimbriae (FimA subunit polymers) with variant Galβ binding specificities and Actinomyces odontolyticus a sialic acid specificity to colonize different oral surfaces. However, the fimbrial nature of the sialic acid binding property and sequence information about FimA proteins from multiple strains are lacking.

Results

Here we have sequenced fimA genes from strains of A.naeslundii genospecies 1 (n = 4) and genospecies 2 (n = 4), both of which harboured variant Galβ-dependent hemagglutination (HA) types, and from A.odontolyticus PK984 with a sialic acid-dependent HA pattern. Three unique subtypes of FimA proteins with 63.8–66.4% sequence identity were present in strains of A. naeslundii genospecies 1 and 2 and A. odontolyticus. The generally high FimA sequence identity (>97.2%) within a genospecies revealed species specific sequences or segments that coincided with binding specificity. All three FimA protein variants contained a signal peptide, pilin motif, E box, proline-rich segment and an LPXTG sorting motif among other conserved segments for secretion, assembly and sorting of fimbrial proteins. The highly conserved pilin, E box and LPXTG motifs are present in fimbriae proteins from other Gram-positive bacteria. Moreover, only strains of genospecies 1 were agglutinated with type-2 fimbriae antisera derived from A. naeslundii genospecies 1 strain 12104, emphasizing that the overall folding of FimA may generate different functionalities. Western blot analyses with FimA antisera revealed monomers and oligomers of FimA in whole cell protein extracts and a purified recombinant FimA preparation, indicating a sortase-independent oligomerization of FimA.

Conclusion

The genus Actinomyces involves a diversity of unique FimA proteins with conserved pilin, E box and LPXTG motifs, depending on subspecies and associated binding specificity. In addition, a sortase independent oligomerization of FimA subunit proteins in solution was indicated.

Sortases and the art of anchoring proteins to the envelopes of gram-positive bacteria

The cell wall envelopes of gram-positive bacteria represent a surface organelle that not only functions as a cytoskeletal element but also promotes interactions between bacteria and their environment. Cell wall peptidoglycan is covalently and noncovalently decorated with teichoic acids, polysaccharides, and proteins. The sum of these molecular decorations provides bacterial envelopes with species- and strain-specific properties that are ultimately responsible for bacterial virulence, interactions with host immune systems, and the development of disease symptoms or successful outcomes of infections. Surface proteins typically carry two topogenic sequences, i.e., N-terminal signal peptides and C-terminal sorting signals. Sortases catalyze a transpeptidation reaction by first cleaving a surface protein substrate at the cell wall sorting signal. The resulting acyl enzyme intermediates between sortases and their substrates are then resolved by the nucleophilic attack of amino groups, typically provided by the cell wall cross bridges of peptidoglycan precursors. The surface protein linked to peptidoglycan is then incorporated into the envelope and displayed on the microbial surface. This review focuses on the mechanisms of surface protein anchoring to the cell wall envelope by sortases and the role that these enzymes play in bacterial physiology and pathogenesis.

Assembly of distinct pilus structures on the surface of Corynebacterium diphtheriae

Different surface organelles contribute to specific interactions of a pathogen with host tissues or infectious partners. Multiple pilus gene clusters potentially encoding different surface structures have been identified in several gram-positive bacterial genomes sequenced to date, including actinomycetales, clostridia, corynebacteria, and streptococci. Corynebacterium diphtheriae has been shown to assemble a pilus structure, with sortase SrtA essential for the assembly of a major subunit SpaA and two minor proteins, SpaB and SpaC. We report here the characterization of a second pilus consisting of SpaD, SpaE, and SpaF, of which SpaD and SpaE form the pilus shaft and SpaF may be located at the pilus tip. The structure of the SpaDEF pilus contains no SpaABC pilins as detected by immunoelectron microscopy. Neither deletion of spaA nor sortase srtA abolishes SpaDEF pilus formation. The assembly of the SpaDEF pilus requires specific sortases located within the SpaDEF pilus gene cluster. Although either sortase SrtB or SrtC is sufficient to polymerize SpaDF, the incorporation of SpaE into the SpaD pili requires sortase SrtB. In addition, an alanine in place of the lysine of the SpaD pilin motif abrogates pilus polymerization. Thus, SpaD, SpaE, and SpaF constitute a different pilus structure that is independently assembled and morphologically distinct from the SpaABC pili and possibly other pili of C. diphtheriae.

Sorting sortases: a nomenclature proposal for the various sortases of Gram-positive bacteria

Bacterial surface proteins constitute a diverse group of molecules with important functions, such as adherence, invasion, signaling and interaction with the host immune system or the environment. In Gram-positive bacteria, many surface proteins are anchored to the cell wall envelope by an enzyme named sortase, which recognizes a conserved carboxylic sorting motif. The sequence of the prototype staphylococcal SrtA has been widely used to identify homologs in bacterial genomes, revealing a profusion of sortases in almost all Gram-positive bacteria, often with more than one sortase-like protein per genome [M.J. Pallen, A.C. Lam, M. Antonio, K. Dunbar, Trends Microbiol. 9 (2001) 97-102]. In light of increasing reports on the identification and/or characterization of paralogous sortase genes, a classification of sortases now appears necessary. This report provides an analysis of sixty-one sortases from complete Gram-positive genomes, and suggests the existence of four structural groups of sortases. We propose the classification of sortases into 4 classes designated A, B, C and D. This classification should help to discriminate between sortases in the future.

Sortases and pilin elements involved in pilus assembly of Corynebacterium diphtheriae

Corynebacterium diphtheriae SpaA pili are composed of three pilin subunits, SpaA, SpaB and SpaC. SpaA, the major pilin protein, is distributed uniformly along the pilus shaft, whereas SpaB is observed at regular intervals, and SpaC seems to be positioned at the pilus tip. Pilus assembly in C. diphtheriae requires the pilin motif and the C-terminal sorting signal of SpaA, and is proposed to occur by a mechanism of ordered cross-linking, whereby pilin-specific sortase enzymes cleave precursor proteins at sorting signals and involve the side-chain amino groups of pilin motif sequences to generate covalent linkages between pilin subunits. We show here that two elements of SpaA pilin precursor, the pilin motif and the sorting signal, are together sufficient to promote the polymerization of an otherwise secreted protein by a process requiring the function of the sortase A gene (srtA). Five other sortase genes are dispensable for SpaA pilus assembly. Further, the incorporation of SpaB into SpaA pili requires a glutamic acid residue within the E box motif of SpaA, a feature that is found to be conserved in other Gram-positive pathogens that encode sortase and pilin subunit genes with sorting signals and pilin motifs. When the main fimbrial subunit of Actinomyces naeslundii type I fimbriae, FimA, is expressed in corynebacteria, C. diphtheriae strain NCTC13129 polymerized FimA to form short fibres. Although C. diphtheriae does not depend on other actinomycetal genes for FimA polymerization, this process involves the pilin motif and the sorting signal of FimA as well as corynebacterial sortase D (SrtD). Thus, pilus assembly in Gram-positive bacteria seems to occur by a universal mechanism of ordered cross-linking of precursor proteins, the multiple conserved features of which are recognized by designated sortase enzymes.

Assembly of pili on the surface of Corynebacterium diphtheriae

Pili of Gram-negative pathogens are formed from pilin precursor molecules by non-covalent association within the outer membrane envelope. Gram-positive microbes employ the cell wall peptidoglycan as a surface organelle for the covalent attachment of proteins, however, an assembly pathway for pili has not yet been revealed. We show here that pili of Corynebacterium diphtheriae are composed of three pilin subunits, SpaA, SpaB and SpaC. SpaA, the major pilin protein, is distributed uniformly along the pilus shaft, whereas SpaB is observed at regular intervals and SpaC seems positioned at the pilus tip. Assembled pili are released from the bacterial surface by treatment with murein hydrolase, suggesting that the pilus fibres may be anchored to the cell wall envelope. All three pilin subunit proteins are synthesized as precursors carrying N-terminal signal peptides and C-terminal sorting signals. Some, but not all, of the six sortase genes encoded in the genome of C. diphtheriae are required for precursor processing, pilus assembly or cell wall envelope attachment. Pilus assembly is proposed to occur by a mechanism of ordered cross-linking, whereby pilin-specific sortase enzymes cleave precursor proteins at sorting signals and involve the side chain amino groups of pilin motif sequences to generate links between pilin subunits. This covalent tethering of adjacent pilin subunits appears to have evolved in many Gram-positive pathogens that encode sortase and pilin subunit genes with sorting signals and pilin motifs.

Subtractive hybridization identifies a novel predicted protein mediating epithelial cell invasion by virulent serotype III group B Streptococcus agalactiae

Group B Streptococcus agalactiae bacteria (group B streptococci [GBS]) are the most common cause of serious bacterial infection in newborn infants. The majority of serotype III-related cases of neonatal disease are caused by a genetically related subgroup of bacteria, restriction fragment digest pattern (RDP) type III-3, suggesting that these strains possess unique genes contributing to virulence. We used genomic subtractive hybridization to identify regions of genomic DNA unique to virulent RDP type III-3 GBS strains. Within one of these III-3-specific regions is a 1,506-bp open reading frame, spb1 (surface protein of group B streptococcus 1). A mutant type III GBS strain lacking Spb1 was constructed in virulent RDP type III-3 strain 874391, and the interactions of the wild-type and spb1 isogenic mutant with a variety of epithelial cells important to GBS colonization and infection were compared. While adherence of the spb1 isogenic mutant to A549 respiratory, C2Bbe1 colonic, and HeLa cervical epithelial cells was slightly lower than that of the 874391 strain, invasion of the Spb1(-) mutant was significantly reduced with these cell lines compared to what was seen with 874391. The defect in epithelial invasion was corrected by supplying spb1 in trans. These observations suggest that Spb1 contributes to the pathogenesis of neonatal GBS infection by mediating internalization of virulent serotype III GBS and confirm that understanding of the population structure of bacteria may lead to insights into the pathogenesis of human infections.

Invited review: adhesion mechanisms of rumen cellulolytic bacteria

We divided the adhesion process of the predominant cellulolytic rumen bacteria Fibrobacter succinogenes, Ruminococcus flavefaciens, and Ruminococcus albus into four phases: 1) transport of the nonmotile bacteria to the substrate; 2) initial nonspecific adhesion of bacteria to unprotected sites of the substrate that is dominated by constitutive elements of bacterial glycocalyx; 3) specific adhesion via adhesins or ligands formation with the substrate, which can be dominated by several bacterial organelles including cellulosome complexes, fimbriae connections, glycosylated epitopes of cellulose-binding protein (CBP) or glycocalyx, and cellulose-binding domain (CBD) of enzymes; 4) proliferation of the attached bacteria on potentially digestible tissues of the substrate. Each of the phases and its significance in the adhesion process are described. Factors affecting bacterial adhesion are described including: 1) factors related to bacterial age, glycocalyx condition, and microbial competition; 2) factors related to the nature of substrate including, cuticle protection, surface area, hydration, and ionic charge; and 3) environmental factors including pH, temperature, and presence of cations and soluble carbohydrate. Based on the information available from the literature, it appears that each of the predominant rumen bacteria--F. succinogenes, R. flavefaciens, and R. albus--has a specific mechanism of adhesion to cellulose. In F. succinogenes, both the glycosidic residues of the outer membrane CBP and especially of the 180-kDa CBP, and the distinct CBD of EG2 EGF and Cl-stimulated cellobiosidase, may play a role in the adhesion to cellulose. No direct evidence, except scanning electron microscopy observations, yet supports the existence of either cellulosome complex or fimbriae structures involved in the adhesion mechanism of F. succinogenes. At least two mechanisms, cellulosome-like complexes and carbohydrate epitopes of the glycocalyx layer are involved in the specific adhesion of R. flavefaciens to cellulose. Ruminococcus albus possesses at least two mechanisms for specific adhesion to cellulose: a cellulosomal-like mechanism, and a CbpC (Pil)-protein mechanism that probably involves the production of fimbrial-like structures. Indirect and direct studies suggested that carbohydrate epitopes of CBPs and CBD epitope of cellulases may also be involved mostly in the nonspecific phase of adhesion of R. albus.

Sortase-catalysed anchoring of surface proteins to the cell wall of Staphylococcus aureus

Many surface proteins of Gram-positive bacteria are anchored to the cell wall envelope by a transpeptidation mechanism, requiring a C-terminal sorting signal with a conserved LPXTG motif. Sortase, a membrane protein of Staphylococcus aureus, cleaves polypeptides between the threonine and the glycine of the LPXTG motif and catalyses the formation of an amide bond between the carboxyl-group of threonine and the amino-group of peptidoglycan cross-bridges. S. aureus mutants lacking the srtA gene fail to anchor and display some surface proteins and are impaired in the ability to cause animal infections. Sortase acts on surface proteins that are initiated into the secretion (Sec) pathway and have their signal peptide removed by signal peptidase. The S. aureus genome encodes two sets of sortase and secretion genes. It is conceivable that S. aureus has evolved more than one pathway for the transport of 20 surface proteins to the cell wall envelope.

An embarrassment of sortases - a richness of substrates?

A range of surface proteins is anchored to the cell walls of Gram-positive pathogens such as Staphylococcus aureus by the transpeptidase sortase. Until now, sortase-like proteins and their substrates appeared to be limited mainly to such pathogens. However, by searching for sortase homologues among complete and incomplete genome sequences, we have found them to be present in almost all Gram-positives, a single Gram-negative bacterium and an archaean. There is usually more than one sortase-like protein encoded in each Gram-positive genome, and the genes encoding the sortase-like proteins are often clustered with genes encoding their likely substrates.

Staphylococcus aureus sortase mutants defective in the display of surface proteins and in the pathogenesis of animal infections

Many gram-positive bacteria covalently tether their surface adhesins to the cell wall peptidoglycan. We find that surface proteins of Staphylococcus aureus are linked to the cell wall by sortase, an enzyme that cleaves polypeptides at a conserved LPXTG motif. S. aureus mutants lacking sortase fail to process and display surface proteins and are defective in the establishment of infections. Thus, the cell wall envelope of gram-positive bacteria represents a surface organelle responsible for interactions with the host environment during the pathogenesis of bacterial infections.

Molecular and genetic analyses of Actinomyces spp

Members of the genus Actinomyces are predominant primary colonizers of the oral cavity and play an important role in initiating plaque development. These bacteria have evolved unique mechanisms that favor colonization and persistence in this micro-environment. The expression of cell-surface fimbriae is correlated with the ability of these bacteria to adhere to specific receptors on the tooth and mucosal surfaces, and to interact with other plaque bacteria. The elaboration of sialidase is thought to enhance fimbriae-mediated adherence by unmasking the fimbrial receptors on mammalian cells. The presence of certain cell-associated or extracellular enzymes, including those involved in sucrose or urea metabolism, may provide the means for these bacteria to thrive under conditions when other growth nutrients are not available. Moreover, these enzyme activities may influence the distribution of other plaque bacteria and promote selection for Actinomyces spp. in certain ecological niches. The recent development of a genetic transfer system for Actinomyces spp. has allowed for studies the results of which demonstrate the existence of multiple genes involved in fimbriae synthesis and function, and facilitated the construction of allelic replacement mutants at each gene locus. Analyses of these mutants have revealed a direct correlation between the synthesis of assembled fimbriae and the observed adherence properties. Further genetic analysis of the various enzyme activities detected from strains of Actinomyces should allow for an assessment of the role of these components in microbial ecology, and their contribution to the overall success of Actinomyces spp. as a primary colonizer and a key player in oral health and disease.

Strains of Actinomyces naeslundii and Actinomyces viscosus exhibit structurally variant fimbrial subunit proteins and bind to different peptide motifs in salivary proteins

Oral strains of Actinomyces spp. express type 1 fimbriae, which are composed of major FimP subunits, and bind preferentially to salivary acidic proline-rich proteins (APRPs) or to statherin. We have mapped genetic differences in the fimP subunit genes and the peptide recognition motifs within the host proteins associated with these differential binding specificities. The fimP genes were amplified by PCR from Actinomyces viscosus ATCC 19246, with preferential binding to statherin, and from Actinomyces naeslundii LY7, P-1-K, and B-1-K, with preferential binding to APRPs. The fimP gene from the statherin-binding strain 19246 is novel and has about 80% nucleotide and amino acid sequence identity to the highly conserved fimP genes of the APRP-binding strains (about 98 to 99% sequence identity). The novel FimP protein contains an amino-terminal signal peptide, randomly distributed single-amino-acid substitutions, and structurally different segments and ends with a cell wall-anchoring and a membrane-spanning region. When agarose beads with CNBr-linked host determinant-specific decapeptides were used, A. viscosus 19246 bound to the Thr42Phe43 terminus of statherin and A. naeslundii LY7 bound to the Pro149Gln150 termini of APRPs. Furthermore, while the APRP-binding A. naeslundii strains originate from the human mouth, A. viscosus strains isolated from the oral cavity of rat and hamster hosts showed preferential binding to statherin and contained the novel fimP gene. Thus, A. viscosus and A. naeslundii display structurally variant fimP genes whose protein products are likely to interact with different peptide motifs and to determine animal host tropism.

Surface proteins of gram-positive bacteria and mechanisms of their targeting to the cell wall envelope

The cell wall envelope of gram-positive bacteria is a macromolecular, exoskeletal organelle that is assembled and turned over at designated sites. The cell wall also functions as a surface organelle that allows gram-positive pathogens to interact with their environment, in particular the tissues of the infected host. All of these functions require that surface proteins and enzymes be properly targeted to the cell wall envelope. Two basic mechanisms, cell wall sorting and targeting, have been identified. Cell well sorting is the covalent attachment of surface proteins to the peptidoglycan via a C-terminal sorting signal that contains a consensus LPXTG sequence. More than 100 proteins that possess cell wall-sorting signals, including the M proteins of Streptococcus pyogenes, protein A of Staphylococcus aureus, and several internalins of Listeria monocytogenes, have been identified. Cell wall targeting involves the noncovalent attachment of proteins to the cell surface via specialized binding domains. Several of these wall-binding domains appear to interact with secondary wall polymers that are associated with the peptidoglycan, for example teichoic acids and polysaccharides. Proteins that are targeted to the cell surface include muralytic enzymes such as autolysins, lysostaphin, and phage lytic enzymes. Other examples for targeted proteins are the surface S-layer proteins of bacilli and clostridia, as well as virulence factors required for the pathogenesis of L. monocytogenes (internalin B) and Streptococcus pneumoniae (PspA) infections. In this review we describe the mechanisms for both sorting and targeting of proteins to the envelope of gram-positive bacteria and review the functions of known surface proteins.

Actinomyces naeslundii displays variant fimP and fimA fimbrial subunit genes corresponding to different types of acidic proline-rich protein and beta-linked galactosamine binding specificity

Actinomyces naeslundii genospecies 1 and 2 bind to acidic proline-rich proteins (APRPs) and statherin via type 1 fimbriae and to beta-linked galactosamine (GalNAcbeta) structures via type 2 fimbriae. In addition, A. naeslundii displays two types of binding specificity for both APRPs-statherin and GalNAcbeta, while Actinomyces odontolyticus binds to unknown structures. To study the molecular basis for these binding specificities, DNA fragments spanning the entire or central portions of fimP (type 1) and fimA (type 2) fimbrial subunit genes were amplified by PCR from strains of genospecies 1 and 2 and hybridized with DNA from two independent collections of oral Actinomyces isolates. Isolates of genospecies 1 and 2 and A. odontolyticus, but no other Actinomyces species, were positive for hybridization with fimP and fimA full-length probes irrespective of binding to APRPs and statherin, GalNAcbeta, or unknown structures. Isolates of genospecies 1 and 2, with deviating patterns of GalNAcbeta1-3Galalpha-O-ethyl-inhibitable coaggregation with Streptococcus oralis Ss34 and MPB1, were distinguished by a fimA central probe from genospecies 1 and 2, respectively. Furthermore, isolates of genospecies 1 and 2 displaying preferential binding to APRPs over statherin were positive with a fimP central probe, while a genospecies 2 strain with the opposite binding preference was not. The sequences of fimP and fimA central gene segments were highly conserved among isolates with the same, but diversified between those with a variant, binding specificity. In conclusion, A. naeslundii exhibits variant fimP and fimA genes corresponding to diverse APRP and GalNAcbeta specificities, respectively, while A. odontolyticus has a genetically related but distinct adhesin binding specificity.

The importance of fimbriae in the virulence and ecology of some oral bacteria

Cumulative evidence indicates that bacterial adherence to mucosal and tooth surfaces as well as bacterial coaggregation are essential steps for colonization of various oral bacterial species. Bacterial fimbriae have been shown to play an important role in the interaction between bacteria and host cells or among bacterial cells. The properties of fimbriae from selected species of oral bacteria are discussed in terms of virulence traits and ecological significance. Among others, Porphyromonas gingivalis fimbriae have been most extensively studied. The fimbrial structure is composed of 41-kDa fimbrillin proteins. DNA sequencing of the fimbrillin gene (fimA) from nine strains of P. gingivalis suggests intraspecies variation in the structure of fimA, while retaining common immunochemical specificities. P. gingivalis fimbriae exhibit a wide variety of biological activities including immunogenicity, binding to various host proteins, stimulation of cytokine production and promotion of bone resorption, Actinobacillus actinomycetemcomitans also possesses fimbriae; however, little is known concerning their chemical, genetical, and biological properties. Fimbriae of Prevotella intermedia are shown to induce hemagglutination reaction, while those of Prevotella loescheii are found to cause coaggregation with other bacteria, i.e., Actinomyces viscosus and sanguis streptococci. Fimbriae from gram-positive oral bacteria such as oral Actinomyces and sanguis streptococci are described. These fimbriae may participate in coaggregation, binding to saliva-coated hydroxyapatite or glycoprotein of the surface layer of oral epithelial cells. Taken together, fimbriae are key components in cell-to-surface and cell-to-cell adherence of oral bacteria and pathogenesis of some oral and systemic diseases.

Molecular cloning of a light-inducible gene (lipA) encoding a novel pilin from Arthrobacter photogonimos

Development of pili on cells of Arthrobacter photogonimos is induced by photo-oxidative conditions. The nucleotide sequence was determined of a light-inducible gene (lipA) that encodes the precursor of a light-inducible pilin (designated LIP), a polypeptide of 212 amino acids. The N-terminal leader peptide includes a typical signal sequence with a consensus cleavage site for signal peptidase 1 after residue 28, which should generate N-terminal arginine. However, the next amino acid, alanine, is the N-terminal residue of the mature protein. The abundance of charged amino acids (27% of total), a calculated pI of 9.98, and recovery of mostly monomers when cells were washed with 1 M NaCl suggest that electrostatic interactions play a dominant role in association of LIP, a novel mechanism for assembly of pili.

Identification of a gene involved in assembly of Actinomyces naeslundii T14V type 2 fimbriae

The nucleotide sequence of the Actinomyces naeslundii T14V type 2 fimbrial structural subunit gene, fimA, and the 3' flanking DNA region was determined. The fimA gene encoded a 535-amino-acid precursor subunit protein (FimA) which included both N-terminal leader and C-terminal cell wall sorting sequences. A second gene, designated orf365, that encoded a 365-amino-acid protein which contained a putative transmembrane segment was identified immediately 3' to fimA. Mutants in which either fimA or orf365 was replaced with a kanamycin resistance gene did not participate in type 2 fimbriae-mediated coaggregation with Streptococcus oralis 34. Type 2 fimbrial antigen was not detected in cell extracts of the fimA mutant by Western blotting with anti-A. naeslundii type 2 fimbrial antibody, but the subunit protein was detected in extracts of the orf365 mutant. The subunit protein detected in this mutant also was immunostained by an antibody raised against a synthetic peptide representing the C-terminal 20 amino acid residues of the predicted FimA. The antipeptide antibody reacted with FimA isolated from the recombinant Escherichia coli clone containing fimA but did not react with purified type 2 fimbriae in extracts of the wild-type strain. These results indicate that synthesis of type 2 fimbriae in A. naeslundii T14V may involve posttranslational cleavage of both the N-terminal and C-terminal peptides of the precursor subunit and also the expression of orf365.

Synthesis and function of Actinomyces naeslundii T14V type 1 fimbriae require the expression of additional fimbria-associated genes

The nucleotide sequence of the chromosomal DNA flanking the Actinomyces naeslundii (formerly A. viscosus) T14V type 1 fimbrial structural subunit gene (fimP) was determined. Six open reading frames (ORFs), in the order 5' ORF3, ORF2, ORF1,fimP, ORF4, ORF5, ORF6 3', were identified. ORF1 encoded a protein of 408 amino acid residues (Mr = 39,270) and had significant sequence homology with the A. naeslundii T14V type 1 and A. naeslundii WVU45 type 2 fimbrial structural subunits. An in-frame fusion of ORF1 to the malE gene of the expression vector, pMAL-c2, yielded a protein that was immunostained with antibodies raised against the maltose binding protein and A. naeslundii T14V whole bacteria. Digestion of the fusion protein with factor Xa released a protein (apparent molecular mass of 34 kDa) that was immunostained only with the antibody directed against A. naeslundii T14V whole bacterial cells. Integration plasmids carrying a kanamycin resistance gene (kan) that was used to substitute for ORF1 or for DNA fragments internal to the coding region of the other five ORFs were used to transform A. naeslundii T14V. Neither type 1 fimbriae nor the 65-kDa fimbrial structural subunit was detected in mutants obtained by allelic replacement of ORF1 or ORF2. Mutants obtained by allelic replacement of ORF3 or ORF4 expressed only the 65-kDa fimbrial structural subunit. These mutants did not bind, in vitro, to proline-rich proteins that serve as the receptors for Actinomyces type 1 fimbriae. In contrast, a mutant in which the integration plasmid DNA had been inserted at a site close to the carboxyl terminus of ORF6 expressed type 1 fimbriae and had adherence properties similar to those observed in the wild-type strain. These results demonstrate the existence of additional genes near fimP that are likely to be involved in the synthesis and function of cell surface fimbriae of A. naeslundii T14V.

Specific inhibitors of bacterial adhesion: observations from the study of gram-positive bacteria that initiate biofilm formation on the tooth surface

Oral surfaces are bathed in secretory antibodies and other salivary macromolecules that are potential inhibitors of specific microbial adhesion. Indigenous Gram-positive bacteria that colonize teeth, including viridans streptococci and actinomyces, may avoid inhibition of adhesion by host secretory molecules through various strategies that involve the structural design and binding properties of bacterial adhesins and receptors. Further studies to define the interactions of these molecules within the host environment may suggest novel approaches for the control of oral biofilm formation.

Cell surface structures of Actinomyces israelii

Actinomyces israelii is the most common cause of human actinomycosis, a chronic granulomatous infection. Periapical actinomycosis involving A. israelii has been identified as an important cause of failure of conventional endodontic treatment. Structures on the bacterial cell surface have been implicated in the pathogenicity of Actinomyces. In this study the ultrastructure of A. israelii was investigated by electron microscopy. Negatively stained preparations revealed the presence of hairlike fimbriae protruding through a thick surface coat on some species, whilst thin sectioning disclosed a Gram-positive cell wall surrounded by a fuzzy outer coat. These structures may be important for the pathogenicity of A. israelii.

Identification of a 95 kDa putative adhesin from Actinomyces serovar WVA963 strain PK1259 that is distinct from type 2 fimbrial subunits

The species Actinomyces serovar WVA963 is among the 20 bacteria most frequently isolated from human subgingival plaque. The interactions of this species with streptococci are inhibited by lactose, a function associated with type 2 fimbrial surface structures in Actinomyces naeslundii. Type 1 fimbriae mediate binding of cells to salivary proline-rich proteins. Specific polyclonal antisera against type 1 and type 2 fimbriae of A. naeslundii T14V revealed both types of fimbriae on Actinomyces serovar WVA963 strain PK1259. To investigate the role of type 2 fimbriae of strain PK1259 in Actinomyces-Streptococcus lactose-inhibitable coaggregations, spontaneous coaggregation-defective (Cog-) mutants that failed to coaggregate with streptococci were isolated; three were chosen for study. All three mutant strains synthesized type 1 fimbriae and a 59 kDa protein; mutant strains PK2415 and PK3092 synthesized type 2 fimbriae and a 57 kDa protein. In contrast, the Cog- strain PK2407 did not agglutinate with anti-type 2 antibodies or show the 57 kDa band, suggesting that the 57 kDa protein was the type 2 fimbrial subunit. Polyclonal antiserum raised against the Actinomyces serovar WVA963 strain PK2399, an antibiotic-resistant derivative of wild-type PK1259, blocked coaggregation between this strain and streptococci. Anti-PK2399 serum absorbed with mutant strain PK3092 bearing type 2 fimbriae retained its blocking ability. Surface sonicates of the parent and mutant strains were adsorbed to streptococcal cells and to lactose-agarose beads. Lactose eluates from both the streptococcal cells and the affinity beads were characterized by SDS-PAGE and corresponding immunoblots using anti-PK2399 serum absorbed with Cog- mutant PK3092. These blots revealed a 95 kDa putative adhesin in the parent strain PK2399 that was absent in the Cog- mutant strain PK3092. These results suggest the presence of a putative 95 kDa actinomyces adhesin distinct from the 57 kDa type 2 fimbrial subunit and that this adhesin mediates lactose-inhibitable coaggregation with streptococci.

Mechanisms of adhesion by oral bacteria

Adherence to a surface is a key element for colonization of the human oral cavity by the more than 500 bacterial taxa recorded from oral samples. Three surfaces are available: teeth, epithelial mucosa, and the nascent surface created as each new bacterial cell binds to existing dental plaque. Oral bacteria exhibit specificity for their respective colonization sites. Such specificity is directed by adhesin-receptor cognate pairs on genetically distinct cells. Colonization is successful when adherent cells grow and metabolically participate in the oral bacterial community. The potential roles of adherence-relevant molecules are discussed in the context of the dynamic nature of the oral econiche.

Construction and use of integration plasmids to generate site-specific mutations in the Actinomyces viscosus T14V chromosome

Stable transformants of Actinomyces viscosus T14V carrying heterologous DNA were obtained with the aid of integration plasmids. These plasmids contained a kanamycin resistance (Kmr) gene flanked by A. viscosus T14V genomic DNA, including parts of the type 1 structural fimbrial subunit gene (fimP) on one or both sides of the antibiotic marker. Significantly more Kmr transformants were obtained with a plasmid carrying longer segments of homologous strain T14V DNA. Integration of this plasmid into the A. viscosus T14V genome affected the expression and function of type 1 fimbriae in the transformants. In the transformant strain designated A. viscosus MY50D, the inactivated fimP replaced the wild-type fimP via allelic replacement. A. viscosus MY51S and MY52S each contained a copy of the plasmid integrated into the genome by a Campbell-like insertion mechanism. A. viscosus MY50D and MY51S lacked type 1 fimbriae and did not bind to proline-rich proteins (the fimbrial receptors) immobilized on nitrocellulose. In contrast, strain MY52S synthesized the structural subunit protein, as detected by immunostaining with anti-A. viscosus T14V type 1 fimbria antibodies. However, the high-molecular-weight proteins observed in sodium dodecyl sulfate-polyacrylamide gels of fimbriae from the cell wall of the wild-type strain T14V were absent in cell wall preparations of this strain. Moreover, A. viscosus MY52S failed to bind, in vitro, to proline-rich proteins. Thus, these results demonstrate that insertion of heterologous DNA at specific sites of the Actinomyces genome can be facilitated with integratable plasmids and that the transformants and mutants generated will aid in the delineation of the roles and contributions of specific genes to the structure and function of any macromolecule produced by these organisms.

Characterization of levJ, a sucrase/fructanase-encoding gene from Actinomyces naeslundii T14V, and comparison of its product with other sucrose-cleaving enzymes

A library of Actinomyces naeslundii T14V DNA was constructed in plasmid pUC18 and from this several sucrose-positive clones were isolated. Evidence was obtained that all these clones contained the same gene. One clone, which carried a plasmid that was named pPNG102, was chosen for further study. It was found that the enzyme specified by this plasmid hydrolyzed sucrose, raffinose, inulin and levan, but not dextran, and did not synthesize fructan or glucan from sucrose. The sequence of the insert in pPNG102 was determined and was found to contain a large ORF that specifies a polypeptide of 99,319 Da with similarity to other sucrases. This gene was named levJ. The deduced amino acid (aa) sequence contained both a potential signal sequence and potential C-terminal cell envelope attachment domain. Alignments revealed an internal 331-aa domain not present in other levanases and sucrases. A neighbour-joining tree showed that sucrases of eukaryotic origin form a cluster with eubacterial sucrase/fructanases, and this cluster does not include other eubacterial sucrases. It is postulated that certain eukaryotic sucrase-encoding genes are of eubacterial origin.

Adhesion of Actinobacillus actinomycetemcomitans to a human oral cell line

Two quantitative, rapid assays were developed to study the adhesion of Actinobacillus actinomycetemcomitans, an oral bacterium associated with periodontal disease, to human epithelial cells. The human oral carcinoma cell line KB was grown in microtiter plates, and adherent bacteria were detected by an enzyme-linked immunosorbent assay with purified anti-A. actinomycetemcomitans serum and horseradish peroxidase-conjugated secondary antibody or [3H]thymidine-labeled bacteria. Adhesion was found to be time dependent and increased linearly with increasing numbers of bacteria added. Variation in the level of adhesion was noted among strains of A. actinomycetemcomitans. Adhesion was not significantly altered by changes in pH (from pH 5 to 9) but was sensitive to sodium chloride concentrations greater than 0.15 M. Pooled human saliva was inhibitory for adhesion when bacteria were pretreated with saliva before being added to the cells. Pretreatment of the KB cells with saliva did not inhibit adhesion. Protease treatment of A. actinomycetemcomitans reduced adhesion of the bacteria to KB cells. The data are consistent with the hypothesis that a protein(s) is required for bacterial adhesion and that host components may play a role in modulating adhesion to epithelial cells.

Expression of foreign proteins on gram-positive commensal bacteria for mucosal vaccine delivery

Non-pathogenic Gram-positive oral commensal bacteria expressing recombinant fusion proteins on their cell surface have been successfully used to raise both a mucosal and a systemic immune response to foreign antigens while colonizing the oropharynx. In this system, fusion-protein vaccines are delivered and anchored to the surface of a commensal, which occupies the mucosal niche invaded by a particular pathogen. Surface expression of these foreign proteins is achieved by exploiting the common mechanism employed by Gram-positive bacteria for translocating and anchoring proteins to the cell surface. The process offers a safe alternative to the use of engineered pathogens as live vaccine delivery vehicles.

Antigenic relationships among oral Actinomyces isolates, Actinomyces naeslundii genospecies 1 and 2, Actinomyces howellii, Actinomyces denticolens, and Actinomyces slackii

Antigenic relatedness among human strains of oral Actinomyces and similar isolates from cattle has been analyzed by agglutination and immunoblotting. Whole cell agglutination placed A. viscosus serotype II, A. naeslundii serotypes II and III, Actinomyces NV, and strains from numerical taxomonic clusters C1, C2, C3, C4, and C6 into a single group. A. viscosus serotype I cross-reacted weakly with this group. A naeslundii serotype I strains and the cattle isolates Actinomyces denticolens and Actinomyces howellii were distinct. The agglutination results for A. slackii were equivocal. Immunoblots of cell wall extracts developed with non-absorbed sera showed cross-reactivity (23% to 90% antigenic similarity) among all of the strains tested, including A. israelii. The range of antigenic similarities among the group which included strains of A. viscosus serotype II, the A. naeslundii serotypes, and clusters C1, C2, C3, C4, and C6 was from 39% to 89%. Immunoblotting showed that A. howellii and A. denticolens were between 39% and 72% similar to A. naeslundii and A. viscosus. Absorption of antisera with A. israelii cell walls removed antibodies recognizing antigens common to Actinomyces and made the sera more specific. Immunoblotting with absorbed sera supported the grouping and separation of strains shown by agglutination. In some cases, serotypes could be included into a specific taxonomic cluster. A. naeslundii serotype II and Actinomyces NV most closely resembled cluster C1 strains, and A. naeslundii serotype III resembled cluster C1 strains, and A. naeslundii serotype I and A. viscosus serotype I were included into clusters C5 and C7, respectively. The results support a recent proposal that strains of A. viscosus serotype II, A. naeslundii serotypes II and III, and Actinomyces NV be included into A. naeslundii genospecies 2, that A. naeslundii serotype I should be designated A. naeslundii genospecies 1, and that A. viscosus serotype I should be retained distinct from A. naeslundii, as A. viscosus.

Complete nucleotide sequence of the Actinomyces viscosus T14V sialidase gene: presence of a conserved repeating sequence among strains of Actinomyces spp

The nucleotide sequence of the Actinomyces viscosus T14V sialidase gene (nanH) and flanking regions was determined. An open reading frame of 2,703 nucleotides that encodes a predominately hydrophobic protein of 901 amino acids (M(r), 92,871) was identified. The amino acid sequence at the amino terminus of the predicted protein exhibited properties characteristic of a typical leader peptide. Five 12-amino-acid units that shared between 33 and 67% sequence identity were noted within the central domain of the protein. Each unit contained the sequence Ser-X-Asp-X-Gly-X-Thr-Trp, which is conserved among other bacterial and trypanosoma sp. sialidases. Thus, the A. viscosus T14V nanH gene and the other prokaryotic and eukaryotic sialidase genes evolved from a common ancestor. Southern hybridization analyses under conditions of high stringency revealed the existence of DNA sequences homologous to A. viscosus T14V nanH in the genomes of 18 strains of five Actinomyces species that expressed various levels of sialidase activity. The data demonstrate that the sialidase genes from divergent groups of Actinomyces spp. are highly conserved.

Conservation of an Actinomyces viscosus T14V type 1 fimbrial subunit homolog among divergent groups of Actinomyces spp

The type 1 fimbrial subunit gene of the human Actinomyces viscosus T14V was used as a DNA probe in Southern analyses to detect related DNA sequences in 16 of 30 strains of Actinomyces spp. under conditions of high stringency. The organisms with homology to the DNA probe included two human and six nonhuman A. viscosus, three human and three nonhuman A. naeslundii, and two A. bovis isolates. Homologous DNA sequences were not detected in strains of A. odontolyticus and A. israelii examined in this study. Northern (RNA) blot analysis revealed expression of a transcript from each of the A. viscosus and A. naeslundii strains and from one A. bovis strain that was comparable in size to that detected from A. viscosus T14V. Cell surface fimbriae were observed on a majority of the strains that expressed the transcript. Various degrees of cross-immunoreactivities between these strains and antibodies specific for type 1 fimbriae of A. viscosus T14V were also observed by colony immunoassay. Thus, the data clearly demonstrate the existence in, and expression by, divergent Actinomyces groups of genomic sequences that are closely related to the type 1 fimbriae of A. viscosus T14V.

Nucleotide sequence of a gene coding for a saliva-binding protein (SsaB) from Streptococcus sanguis 12 and possible role of the protein in coaggregation with actinomyces

The nucleotide sequence of a 2.9-kb streptococcal DNA fragment which codes for two proteins with MrS of 36,000 (Streptococcus sanguis adhesin B [SsaB]) and 20,000 has been determined. The ssaB gene is 927 bp and codes for a 34,684-Da protein. The open reading frame coding for the 20-kDa protein is 489 bp and codes for a protein of 17,885 Da. The SsaB protein has a putative hydrophobic 19-amino-acid signal sequence resulting in a 32,620-Mr secreted protein, whereas the 20-kDa protein has no signal sequence. Both proteins are hydrophilic, and neither appears to have a hydrophobic membrane anchor sequence in the carboxy-terminal region. A DNA sequence homology of 73% exists between the cloned fragment containing the ssaB gene from S. sanguis 12 and the cloned fragment containing the type 1 fimbrial gene of S. sanguis FW213 (J.C. Fenno, D.J. LeBlanc, and P. Fives-Taylor, Infect. Immun. 57:3527-3533, 1989). Amino acid comparisons of the SsaB and type 1 fimbrial proteins show 87% homology, indicating a close similarity of the two proteins. Antiserum raised against the cloned SsaB protein cross-reacts with a 38-kDa protein identified from Streptococcus gordonii (S. sanguis) PK488 which was proposed to mediate coaggregation with Actinomyces naeslundii PK606 (P.E. Kolenbrander and R.N. Andersen, Infect. Immun. 58:3064-3072, 1990). The SsaB adhesion may play a role in oral colonization by binding either to a receptor on saliva or to a receptor on actinomyces.

Complement activation by individual and combinations of monoclonal antibodies to Actinomyces viscosus T14V fimbriae: a probe for epitope distribution on these polymeric proteins

The spatial requirements for IgG activation of the classical complement pathway has provided a basis for utilizing complement consumption by individual and pairs of monoclonal antibodies (mAbs) to compare the repeating epitope patterns of the type 1 and type 2 fimbriae of Actinomyces viscosus T14V and to examine the co-operative effects of mAbs against these polymeric proteins. Three of five mAbs specific for the type 1 fimbriae consumed complement when assayed individually. Four patterns of complement consumption were detected with pairs of these mAbs: inhibition, addition, enhancement or synergy. Inhibition occurred when both members of a pair reacted with the same epitope but only one consumed complement. A strictly additive effect was observed if both mAbs consumed complement and, in addition, recognized the same epitope. Complement consumption by mAbs against certain epitopes was enhanced by non-complement consuming mAbs that reacted with different epitopes. Synergy was observed with extremely low concentrations of two mAbs each of which reacted with a different epitope and consumed complement. In contrast to the anti-type 1 mAbs, only one of seven mAbs against the type 2 fimbriae consumed more than 20% of the available complement. Pairs of anti-type 2 mAbs exhibited only inhibition or synergy. The latter effect was particularly striking as pairs containing mAbs that reacted with different epitopes and failed to consume complement or were minimally active when assayed individually were extremely efficient. These data indicated that the spatial arrangements of individual mAbs bound to repeating epitopes in the type 1, but not the type 2, fimbriae were appropriate for activation of complement. Thus, the repeating epitope patterns of the two types of fimbriae apparently differ.