Replacement recombination in Lactococcus lactis

Advancements in gene editing technologies for probiotic-enabled disease therapy

Probiotics typically refer to microorganisms that have been identified for their health benefits, and they are added to foods or supplements to promote the health of the host. A growing number of probiotic strains have been identified lately and developed into valuable regulatory pharmaceuticals for nutritional and medical applications. Gene editing technologies play a crucial role in addressing the need for safe and therapeutic probiotics in disease treatment. These technologies offer valuable assistance in comprehending the underlying mechanisms of probiotic bioactivity and in the development of advanced probiotics. This review aims to offer a comprehensive overview of gene editing technologies applied in the engineering of both traditional and next-generation probiotics. It further explores the potential for on-demand production of customized products derived from enhanced probiotics, with a particular emphasis on the future of gene editing in the development of live biotherapeutics.

Treatment with a Lactococcus lactis that chromosomally express E. coli cfaI mitigates salivary flow loss in a Sjögren's syndrome-like disease

Sjögren's Syndrome (SjS) results in loss of salivary and lacrimal gland excretion due to an autoimmune attack on these secretory glands. Conventional SjS treatments address the symptoms, but not the cause of disease. Recognizing this deficit of treatments to reverse SjS disease, studies were pursued using the fimbriae from enterotoxigenic E. coli, colonization factor antigen I (CFA/I), which has anti-inflammatory properties. To determine if CFA/I fimbriae could attenuate SjS-like disease in C57BL/6.NOD-Aec1Aec2 (SjS) females, the Lactococcus lactis (LL) 301 strain was developed to chromosomally express the cfaI operon. Western blot analysis confirmed CFA/I protein expression, and this was tested in SjS females at different stages of disease. Repeated dosing with LL 301 proved effective in mitigating salivary flow loss and in reducing anti-nuclear antibodies (ANA) and inflammation in the submandibular glands (SMGs) in SjS females and in restoring salivary flow in diseased mice. LL 301 treatment reduced proinflammatory cytokine production with concomitant increases in TGF-β+ CD25+ CD4+ T cells. Moreover, LL 301 treatment reduced draining lymph and SMG follicular T helper (Tfh) cell levels and proinflammatory cytokines, IFN-γ, IL-6, IL-17, and IL-21. Such evidence points to the therapeutic capacity of CFA/I protein to suppress SjS disease and to have restorative properties in combating autoimmune disease.

Lactococcus lactis Delivery of Surface Layer Protein A Protects Mice from Colitis by Re-Setting Host Immune Repertoire

Inflammatory bowel disease (IBD) is characterized by gastrointestinal inflammation comprised of Crohn's disease and ulcerative colitis. Centers for Disease Control and Prevention report that 1.3% of the population of the United States (approximately 3 million people) were affected by the disease in 2015, and the number keeps increasing over time. IBD has a multifactorial etiology, from genetic to environmental factors. Most of the IBD treatments revolve around disease management, by reducing the inflammatory signals. We previously identified the surface layer protein A (SlpA) of Lactobacillus acidophilus that possesses anti-inflammatory properties to mitigate murine colitis. Herein, we expressed SlpA in a clinically relevant, food-grade Lactococcus lactis to further investigate and characterize the protective mechanisms of the actions of SlpA. Oral administration of SlpA-expressing L. lactis (R110) mitigated the symptoms of murine colitis. Oral delivery of R110 resulted in a higher expression of IL-27 by myeloid cells, with a synchronous increase in IL-10 and cMAF in T cells. Consistent with murine studies, human dendritic cells exposed to R110 showed exquisite differential gene regulation, including IL-27 transcription, suggesting a shared mechanism between the two species, hence positioning R110 as potentially effective at treating colitis in humans.

Enterococcus peptidoglycan remodeling promotes checkpoint inhibitor cancer immunotherapy

The antitumor efficacy of cancer immunotherapy can correlate with the presence of certain bacterial species within the gut microbiome. However, many of the molecular mechanisms that influence host response to immunotherapy remain elusive. In this study, we show that members of the bacterial genus Enterococcus improve checkpoint inhibitor immunotherapy in mouse tumor models. Active enterococci express and secrete orthologs of the NlpC/p60 peptidoglycan hydrolase SagA that generate immune-active muropeptides. Expression of SagA in nonprotective E. faecalis was sufficient to promote immunotherapy response, and its activity required the peptidoglycan sensor NOD2. Notably, SagA-engineered probiotics or synthetic muropeptides also augmented anti-PD-L1 antitumor efficacy. Taken together, our data suggest that microbiota species with specialized peptidoglycan remodeling activity and muropeptide-based therapeutics may enhance cancer immunotherapy and could be leveraged as next-generation adjuvants.

Deletion of Lipoteichoic Acid Synthase Impacts Expression of Genes Encoding Cell Surface Proteins in Lactobacillus acidophilus

Lactobacillus acidophilus NCFM is a well-characterized probiotic microorganism, supported by a decade of genomic and functional phenotypic investigations. L. acidophilus deficient in lipoteichoic acid (LTA), a major immunostimulant in Gram-positive bacteria, has been shown to shift immune system responses in animal disease models. However, the pleiotropic effects of removing LTA from the cell surface in lactobacilli are unknown. In this study, we surveyed the global transcriptional and extracellular protein profiles of two strains of L. acidophilus deficient in LTA. Twenty-four differentially expressed genes specific to the LTA-deficient strains were identified, including a predicted heavy metal resistance operon and several putative peptidoglycan hydrolases. Cell morphology and manganese sensitivity phenotypes were assessed in relation to the putative functions of differentially expressed genes. LTA-deficient L. acidophilus exhibited elongated cellular morphology and their growth was severely inhibited by elevated manganese concentrations. Exoproteomic surveys revealed distinct changes in the composition and relative abundances of several extracellular proteins and showed a bias of intracellular proteins in LTA-deficient strains of L. acidophilus. Taken together, these results elucidate the impact of ltaS deletion on the transcriptome and extracellular proteins of L. acidophilus, suggesting roles of LTA in cell morphology and ion homeostasis as a structural component of the Gram positive cell wall.

Stable integration and expression of heterologous genes in several lactobacilli using an integration vector constructed from the integrase and attP sequences of phage ΦAT3 isolated from Lactobacillus casei ATCC 393

An integration vector capable of stably integrating and maintaining in the chromosomes of several lactobacilli over hundreds of generations has been constructed. The major integration machinery used is based on the ΦAT3 integrase (int) and attP sequences determined previously. A novel core sequence located at the 3' end of the tRNA(leu) gene is identified in Lactobacillus fermentum ATCC 14931 as the integration target by the integration vector though most of such sequences found in other lactobacilli are similar to that determined previously. Due to the lack of an appropriate attB site in Lactococcus lactis MG1363, the integration vector is found to be unable to integrate into the chromosome of the strain. However, such integration can be successfully restored by cotransforming the integration vector with a replicative one harboring both attB and erythromycin resistance sequences into the strain. Furthermore, the integration vector constructed carries a promoter region of placT from the chromosome of Lactobacillus rhamnosus TCELL-1 which is used to express green fluorescence and luminance protein genes in the lactobacilli studied.

Tuning the drug efflux activity of an ABC transporter in vivo by in vitro selected DARPin binders

ABC transporters use the energy from binding and hydrolysis of ATP to import or extrude substrates across the membrane. Using ribosome display, we raised designed ankyrin repeat proteins (DARPins) against detergent solubilized LmrCD, a heterodimeric multidrug ABC exporter from Lactococcus lactis. Several target-specific DARPin binders were identified that bind to at least three distinct, partially overlapping epitopes on LmrD in detergent solution as well as in native membranes. Remarkably, functional screening of the LmrCD-specific DARPin pools in L. lactis revealed three homologous DARPins which, when generated in LmrCD-expressing cells, strongly activated LmrCD-mediated drug transport. As LmrCD expression in the cell membrane was unaltered upon the co-expression of activator DARPins, the activation is suggested to occur at the level of LmrCD activity. Consistent with this, purified activator DARPins were found to stimulate the ATPase activity of LmrCD in vitro when reconstituted in proteoliposomes. This study suggests that membrane transporters are tunable in vivo by in vitro selected binding proteins. Our approach could be of biopharmaceutical importance and might facilitate studies on molecular mechanisms of ABC transporters.

Food-grade gene expression in lactic acid bacteria

In the 1990s, significant efforts were invested in the research and development of food-grade expression systems in lactic acid bacteria (LAB). At this time, Lactococcus lactis in particular was demonstrated to be an ideal cell factory for the food-grade production of recombinant proteins. Steady progress has since been made in research on LAB, including Lactococcus, Lactobacillus and Streptococcus, in the areas of recombinant enzyme production, industrial food fermentation, and gene and metabolic pathway regulation. Over the past decade, this work has also led to new approaches on chromosomal integration vectors and host/vector systems. These newly constructed food-grade gene expression systems were designed with specific attention to self-cloning strategies, food-grade selection markers, plasmid replication and chromosomal gene replacements. In this review, we discuss some well-characterized chromosomal integration and food-grade host/vector systems used in LAB, with a special focus on sustainability, stability and overall safety, and give some attractive examples of protein expression that are based on these systems.

Targeted allele replacement mutagenesis of Corynebacterium pseudotuberculosis

A two-step allele replacement mutagenesis procedure, using a conditionally replicating plasmid, was developed to allow the creation of targeted, marker-free mutations in Corynebacterium pseudotuberculosis. The relationship between homologous sequence length and recombination frequency was determined, and enhanced plasmid excision was observed due to the rolling-circle replication of the mutagenesis vector. Furthermore, an antibiotic enrichment procedure was applied to improve the recovery of mutants. Subsequently, as proof of concept, a marker-free, cp40-deficient mutant of C. pseudotuberculosis was constructed.

Insertion of a heterologous gene construct into a non-functional ORF of the Streptococcus thermophilus chromosome

An integrative vector was constructed for inserting heterologous genes within a non-functional open reading frame (ORF) on the chromosome of Streptococcus thermophilus. The vector, pINTRS, contained a temperature sensitive origin of replication and an erythromycin resistance gene for initial selection in S. thermophilus. The region of the vector containing unique cloning sites, for insertion of recombinant genes, was flanked by homologous DNA sequences corresponding to a pseudogene in S. thermophilus to facilitate chromosomal integration. The gene encoding green fluorescent protein, regulated by a plasmid borne hsp promoter of S. thermophilus, was cloned into pINTRS to demonstrate proper functioning of the vector.

The inhibitory spectrum of thermophilin 9 from Streptococcus thermophilus LMD-9 depends on the production of multiple peptides and the activity of BlpG(St), a thiol-disulfide oxidase

The blp(St) cluster of Streptococcus thermophilus LMD-9 was recently shown to contain all the genetic information required for the production of bacteriocins active against other S. thermophilus strains. In this study, we further investigated the antimicrobial activity of S. thermophilus LMD-9 by testing the susceptibility of 31 bacterial species (87 strains). We showed that LMD-9 displays an inhibitory spectrum targeted toward related gram-positive bacteria, including pathogens such as Listeria monocytogenes. Using deletion mutants, we investigated the contribution of the three putative bacteriocin-encoding operons blpD(St)-orf2, blpU(St)-orf3, and blpE(St)-blpF(St) (bac(St) operons) and of the blpG(St) gene, which encodes a putative modification protein, to the inhibitory spectrum and immunity of strain LMD-9. Our results present evidence that the blp(St) locus encodes a multipeptide bacteriocin system called thermophilin 9. Among the four class II bacteriocin-like peptides encoded within the bac(St) operons, BlpD(St) alone was sufficient to inhibit the growth of most thermophilin 9-sensitive species. The blpD(St) gene forms an operon with its associated immunity gene(s), and this functional bacteriocin/immunity module could easily be transferred to Lactococcus lactis. The remaining three Bac(St) peptides, BlpU(St), BlpE(St), and BlpF(St), confer poor antimicrobial activity but act as enhancers of the antagonistic activity of thermophilin 9 by an unknown mechanism. The blpG(St) gene was also shown to be specifically required for the antilisteria activity of thermophilin 9, since its deletion abolished the sensitivities of most Listeria species. By complementation of the motility deficiency of Escherichia coli dsbA, we showed that blpG(St) encodes a functional thiol-disulfide oxidase, suggesting an important role for disulfide bridges within thermophilin 9.

Efficient transformation of Lactococcus lactis IL1403 and generation of knock-out mutants by homologous recombination

Lactococcus lactis IL1403 is a Gram-positive bacterium of great biotechnological interest for food grade applications. Its use is however hampered by the difficulty to efficiently transform this strain. We here describe a detailed, optimized electrotransformation protocol which yields a transformation efficiency of 10(6) cfu/microg of DNA with the two E. coli Gram-positive shuttle vectors pC3 and pVA838. The utility of the protocol was demonstrated by the generation of single- and double-knock-out mutants by homologous recombination.

Cre-lox-based system for multiple gene deletions and selectable-marker removal in Lactobacillus plantarum

The classic strategy to achieve gene deletion variants is based on double-crossover integration of nonreplicating vectors into the genome. In addition, recombination systems such as Cre-lox have been used extensively, mainly for eukaryotic organisms. This study presents the construction of a Cre-lox-based system for multiple gene deletions in Lactobacillus plantarum that could be adapted for use on gram-positive bacteria. First, an effective mutagenesis vector (pNZ5319) was constructed that allows direct cloning of blunt-end PCR products representing homologous recombination target regions. Using this mutagenesis vector, double-crossover gene replacement mutants could be readily selected based on their antibiotic resistance phenotype. In the resulting mutants, the target gene is replaced by a lox66-P(32)-cat-lox71 cassette, where lox66 and lox71 are mutant variants of loxP and P(32)-cat is a chloramphenicol resistance cassette. The lox sites serve as recognition sites for the Cre enzyme, a protein that belongs to the integrase family of site-specific recombinases. Thus, transient Cre recombinase expression in double-crossover mutants leads to recombination of the lox66-P(32)-cat-lox71 cassette into a double-mutant loxP site, called lox72, which displays strongly reduced recognition by Cre. The effectiveness of the Cre-lox-based strategy for multiple gene deletions was demonstrated by construction of both single and double gene deletions at the melA and bsh1 loci on the chromosome of the gram-positive model organism Lactobacillus plantarum WCFS1. Furthermore, the efficiency of the Cre-lox-based system in multiple gene replacements was determined by successive mutagenesis of the genetically closely linked loci melA and lacS2 in L. plantarum WCFS1. The fact that 99.4% of the clones that were analyzed had undergone correct Cre-lox resolution emphasizes the suitability of the system described here for multiple gene replacement and deletion strategies in a single genetic background.

A general method for selection of riboflavin-overproducing food grade micro-organisms

Background

This study describes a strategy to select and isolate spontaneous riboflavin-overproducing strains of Lactobacillus (Lb.) plantarum, Leuconostoc (Lc.) mesenteroides and Propionibacterium (P.) freudenreichii.

Results

The toxic riboflavin analogue roseoflavin was used to isolate natural riboflavin-overproducing variants of the food grade micro-organisms Lb. plantarum, Lc. mesenteroides and P. freudenreichii strains. The method was successfully employed for strains of all three species. The mutation(s) responsible for the observed overproduction of riboflavin were identified for isolates of two species.

Conclusion

Selection for spontaneous roseoflavin-resistant mutants was found to be a reliable method to obtain natural riboflavin-overproducing strains of a number of species commonly used in the food industry. This study presents a convenient method for deriving riboflavin-overproducing strains of bacterial starter cultures, which are currently used in the food industry, by a non-recombinant methodology. Use of such starter strains can be exploited to increase the vitamin content in certain food products.

The riboflavin transporter RibU in Lactococcus lactis: molecular characterization of gene expression and the transport mechanism

This study describes the characterization of the riboflavin transport protein RibU in the lactic acid bacterium Lactococcus lactis subsp. cremoris NZ9000. RibU is predicted to contain five membrane-spanning segments and is a member of a novel transport protein family, not described in the Transport Classification Database. Transcriptional analysis revealed that ribU transcription is downregulated in response to riboflavin and flavin mononucleotide (FMN), presumably by means of the structurally conserved RFN (riboflavin) element located between the transcription start site and the start codon. An L. lactis strain carrying a mutated ribU gene exhibits altered transcriptional control of the riboflavin biosynthesis operon ribGBAH in response to riboflavin and FMN and does not consume riboflavin from its growth medium. Furthermore, it was shown that radiolabeled riboflavin is not taken up by the ribU mutant strain, in contrast to the wild-type strain, directly demonstrating the involvement of RibU in riboflavin uptake. FMN and the toxic riboflavin analogue roseoflavin were shown to inhibit riboflavin uptake and are likely to be RibU substrates. FMN transport by RibU is consistent with the observed transcriptional regulation of the ribGBAH operon by external FMN. The presented transport data are consistent with a uniport mechanism for riboflavin translocation and provide the first detailed molecular and functional analysis of a bacterial protein involved in riboflavin transport.

The Lactococcus lactis CodY regulon: identification of a conserved cis-regulatory element

CodY of Lactococcus lactis MG1363 is a transcriptional regulator that represses the expression of several genes encoding proteins of the proteolytic system. DNA microarray analysis, comparing the expression profiles of L. lactis MG1363 and an isogenic strain in which codY was mutated, was used to determine the CodY regulon. In peptide-rich medium and exponentially growing cells, where CodY exerts strong repressing activity, the expression of over 30 genes was significantly increased upon removal of codY. The differentially expressed genes included those predominantly involved in amino acid transport and metabolism. In addition, several genes belonging to other functional categories were derepressed, stressing the pleiotropic role of CodY. Scrutinizing the transcriptome data with bioinformatics tools revealed the presence of a novel over-represented motif in the upstream regions of several of the genes derepressed in L. lactis MG1363DeltacodY. Evidence is presented that this 15-bp cis-sequence, AATTTTCWGAAAATT, serves as a high affinity binding site for CodY, as shown by electrophoretic mobility shift assays and DNase I footprinting analyses. The presence of this CodY-box is sufficient to evoke CodY-mediated regulation in vivo. A copy of this motif is also present in the upstream region of codY itself. It is shown that CodY regulates its own synthesis and requires the CodY-box and branched-chain amino acids to interact with its promoter.

Probing direct interactions between CodY and the oppD promoter of Lactococcus lactis

CodY of Lactococcus lactis MG1363 is a transcriptional regulator that represses the expression of several genes encoding proteins of the proteolytic system. These genes include pepN, pepC, opp-pepO1, and probably prtPM, pepX, and pepDA2, since the expression of the latter three genes relative to nitrogen availability is similar to that of the former. By means of in vitro DNA binding assays and DNase I footprinting techniques, we demonstrate that L. lactis CodY interacts directly with a region upstream of the promoter of its major target known so far, the opp system. Our results indicate that multiple molecules of CodY interact with this promoter and that the amount of bound CodY molecules is affected by the presence of branched-chain amino acids and not by GTP. Addition of these amino acids strongly affects the extent of the region protected by CodY in DNase I footprints. Random and site-directed mutagenesis of the upstream region of oppD yielded variants that were derepressed in a medium with an excess of nitrogen sources. Binding studies revealed the importance of specific bases in the promoter region required for recognition by CodY.

Riboflavin production in Lactococcus lactis: potential for in situ production of vitamin-enriched foods

This study describes the genetic analysis of the riboflavin (vitamin B(2)) biosynthetic (rib) operon in the lactic acid bacterium Lactococcus lactis subsp. cremoris strain NZ9000. Functional analysis of the genes of the L. lactis rib operon was performed by using complementation studies, as well as by deletion analysis. In addition, gene-specific genetic engineering was used to examine which genes of the rib operon need to be overexpressed in order to effect riboflavin overproduction. Transcriptional regulation of the L. lactis riboflavin biosynthetic process was investigated by using Northern hybridization and primer extension, as well as the analysis of roseoflavin-induced riboflavin-overproducing L. lactis isolates. The latter analysis revealed the presence of both nucleotide replacements and deletions in the regulatory region of the rib operon. The results presented here are an important step toward the development of fermented foods containing increased levels of riboflavin, produced in situ, thus negating the need for vitamin fortification.

Novel sucrose-dependent adhesion co-factors in Streptococcus mutans

Streptococcus mutans glucosyltransferases form extracellular glucans from sucrose to promote adhesion to the teeth. We tested whether additional factors are involved in S. mutans sucrose-dependent adhesion. By screening a pVA891-insertion mutant library of S. mutans LT11, we isolated four clones deficient in adhesion to glass in the presence of sucrose, but normal in glucosyltransferase activities. The genetic loci flanking the insertion sites were retrieved and identified. They encode glycerol-3-phosphate dehydrogenase, an ABC transporter, a multidrug-efflux pump, and either the ribulose monophosphate operon or ascorbate metabolism operon. The four mutants were analyzed for their phenotypic expression and in vivo colonization in rats. The multidrug efflux pump mutant failed to colonize the rats. Three other mutants colonized the rats by reverting to the wild type. Therefore, these four factors may contribute to S. mutans sucrose-dependent adhesion.

Mutagenesis in the post genomics era: tools for generating insertional mutations in the lactic acid bacteria

The increasing availability of whole genome sequences has increased the demand for effective tools to generate insertional mutations in the lactic acid bacteria (LAB). Several novel approaches, such as shuttle-, transposome- and intron-based mutagenesis methods, are possible additions to the existing repertoire of transposon- and recombination-based tools available for mutagenesis of LAB.

Six putative two-component regulatory systems isolated from Lactococcus lactis subsp. cremoris MG1363

The genetic elements specifying six putative two-component regulatory systems (2CSs) were identified on the chromosome of Lactococcus lactis MG1363. These 2CSs appear to represent distinct loci, each containing a histidine kinase and response-regulator-encoding gene pair. Transcriptional analysis of the six 2CSs was performed either by generating transcriptional fusions to a reporter gene or by primer extension. Two of the systems appeared to be expressed constitutively at a high level, whilst the remaining four exhibited growth-phase-dependent expression. Insertional mutagenesis established that the two constitutively expressed 2CSs are necessary for normal cell growth and/or survival. Mutational analysis of the remaining four systems revealed that they are implicated in susceptibility to extreme pH, osmotic or oxidative conditions, or the regulation of phosphatase activity in L. lactis.

Identification and characterisation of a gene encoding aminoacylase activity from Lactococcus lactis MG1363

Analysis of the sequence of a randomly cloned chromosomal DNA fragment (3.2 kb) from Lactococcus lactis revealed the presence of part of an open reading frame, designated amd1, which specifies a protein displaying significant similarity to aminoacylases from various bacteria. The presence of an immobilised copy of an IS982 element immediately upstream of the coding region of amd1 has probably resulted in the displacement of amd1's native promoter. This genetic organisation was shown to be retained in seven other dairy strains, one of which was only slightly different. The amd1 gene was overexpressed in L. lactis NZ9800 under the control of the inducible nisA promoter and the deacetylating capacity of its gene product was measured on a number of substrates.

Cloning, expression, and chromosomal stabilization of the Propionibacterium shermanii proline iminopeptidase gene (pip) for food-grade application in Lactococcus lactis

Proline iminopeptidase produced by Propionibacterium shermanii plays an essential role in the flavor development of Swiss-type cheeses. The enzyme (Pip) was purified and characterized, and the gene (pip) was cloned and expressed in Escherichia coli and Lactococcus lactis, the latter species being an extensively studied, primary cheese starter culture that is less fastidious in its growth condition requirements than P. shermanii. The levels of expression of the pip gene could be enhanced with a factor 3 to 5 by using a strong constitutive promoter in L. lactis or the inducible tac promoter in E. coli. Stable replication of the rolling-circle replicating (rcr) plasmid, used to express pip in L. lactis, could only be obtained by providing the repA gene in trans. Upon the integration of pip, clear gene dosage effects were observed and stable multicopy integrants could be maintained upon growth under the selective pressure of sucrose. The multicopy integrants demonstrated a high degree of stability in the presence of glucose. This study examines the possibilities to overexpress genes that play an important role in food fermentation processes and shows a variety of options to obtain stable food-grade expression of such genes in L. lactis.

Cloning of the Lactococcus lactis adhE gene, encoding a multifunctional alcohol dehydrogenase, by complementation of a fermentative mutant of Escherichia coli

The Lactococcus lactis adhE gene, which encodes a multifunctional alcohol dehydrogenase, has been cloned and characterized. A DNA fragment encoding the putative alcohol dehydrogenase domain of the AdhE protein was cloned by screening an L. lactis genomic library in a fermentative mutant of Escherichia coli and selecting for the ability to grow anaerobically. Further analysis of the clone obtained allowed the cloning of the entire adhE gene sequence. Analysis of adhE expression in L. lactis during anaerobiosis showed induction at the transcriptional level, especially in medium containing glucose. Constructed mutant strains produced reduced amounts of ethanol under anaerobic conditions. With the L. lactis gene as a probe, adhE homologs were found in other industrially relevant lactic acid bacteria.

Cloning and sequence analysis of putative histidine protein kinases isolated from Lactococcus lactis MG1363

Eight recombinant plasmids harboring chromosomal fragments of Lactococcus lactis MG1363 were shown to phenotypically suppress a histidine protein kinase (HPK) deficiency in either of two different E. coli strains. Sequence analysis of the plasmid inserts revealed five different complete or partial open reading frames (ORFs) specifying proteins with high similarity to HPKs. One of the plasmids also harbored an additional ORF, unrelated to HPKs, with suppressing activity.

Cloning and transcriptional analysis of two threonine biosynthetic genes from Lactococcus lactis MG1614

Two genes, hom and thrB, involved in threonine biosynthesis in Lactococcus lactis MG1614, were cloned and sequenced. These genes, which encode homoserine dehydrogenase and homoserine kinase, were initially identified by the homology of their gene products with known homoserine dehydrogenases and homoserine kinases from other organisms. The identification was supported by construction of a mutant containing a deletion in hom and thrB that was unable to grow in a defined medium lacking threonine. Transcriptional analysis showed that the two genes were located in a bicistronic operon with the order 5' hom-thrB 3' and that transcription started 66 bp upstream of the translational start codon of the hom gene. A putative -10 promoter region (TATAAT) was located 6 bp upstream of the transcriptional start point, but no putative -35 region was identified. A DNA fragment covering 155 bp upstream of the hom translational start site was functional in pAK80, an L. lactis promoter probe vector. In addition, transcriptional studies showed no threonine-dependent regulation of hom-thrB transcription.

DNA sequence analysis, expression, distribution, and physiological role of the Xaa-prolyldipeptidyl aminopeptidase gene from Lactobacillus helveticus CNRZ32

Lactobacillus helveticus CNRZ32 possesses an Xaa-prolyldipeptidyl aminopeptidase (PepX), which releases amino-terminal dipeptides from peptides containing proline residues in the penultimate position. The PepX gene, designated pepX, from Lb. helveticus CNRZ32 was sequenced. Analysis of the sequence identified a putative 2379-bp pepX open-reading frame, which encodes a polypeptide of 793 amino acid residues with a deduced molecular mass of 88,111 Da. The gene shows significant sequence identity with sequenced pepX genes from lactic acid bacteria. The product of the gene contains a motif that is almost identical with the active-site motif of the serine-dependent PepX from lactococci. The introduction of pepX into Lactococcus lactis LM0230 on either pGK12 (a low-copy-number plasmid vector) or pIL253 (a high-copy-number plasmid vector) did not result in a significant increase in PepX activity, while the introduction of pepX into CNRZ32 on pGK12 resulted in a four-fold increase in PepX activity. Southern hybridization experiments revealed that the pepX gene from CNRZ32 is well conserved in lactobacilli, pediococci and streptococci. The physiological role of PepX during growth in lactobacillus MRS (a rich medium containing protein hydrolysates along with other ingredients) and milk was examined by comparing growth of CNRZ32 and a CNRZ32 PepX-negative derivative. No difference in growth rate or acid production was observed between CNRZ32 and its PepX-negative derivative in MRS. However, the CNRZ32 PepX-negative derivative grew in milk at a reduced specific growth rate when compared to wild-type CNRZ32. Introduction of the cloned PepX determinant into the CNRZ32 PepX-negative derivative resulted in a construct with a specific growth rate similar to that of wild-type CNRZ32.

A system to generate chromosomal mutations in Lactococcus lactis which allows fast analysis of targeted genes

A system for generating chromosomal insertions in lactococci is described. It is based on the conditional replication of lactococcal pWV01-derived Ori+ RepA- vector pORI19, containing lacZ alpha and the multiple cloning site of pUC19. Chromosomal AluI fragments of Lactococcus lactis were cloned in pORI19 in RepA+ helper strain Escherichia coli EC101. The frequency of Campbell-type recombinants, following introduction of this plasmid bank into L. lactis (RepA-), was increased by combining the system with temperature-sensitive pWV01 derivative pVE6007. Transformation of L. lactis MG1363 (pVE6007) with the pORI19 bank of lactococcal chromosomal fragments at the permissive temperature allowed replication of several copies of a recombinant plasmid from the bank within a cell because of the provision in trans of RepA-Ts from pVE6007. A temperature shift to 37 degrees C resulted in loss of pVE6007 and integration of the pORI19 derivatives at high frequencies. A bank of lactococcal mutants was made in this way and successfully screened for the presence of two mutations: one in the monocistronic 1.3-kb peptidoglycan hydrolase gene (acmA) and one in the hitherto uncharacterized maltose fermentation pathway. Reintroduction of pVE6007 into the Mal- mutant at 30 degrees C resulted in excision of the integrated plasmid and restoration of the ability of ferment maltose. The integration plasmid (pMAL) was rescued by using the isolated plasmid content of a restored Mal+ colony to transform E. coli EC101. Nucleotide sequencing of the 564-bp chromosomal fragment in pMAL revealed an internal part of an open reading frame of which the translated product showed significant homology with ATP-binding proteins MalK of E. coli, Salmonella typhimurium, and Enterobacter aerogenes and MsmK of Streptococcus mutans. This combined use of two types of conditional replicating pWV01-derived vectors represents a novel, powerful tool for chromosomal gene inactivation, targeting, cloning, and sequencing of the labelled gene.

Directed genomic integration in Actinobacillus actinomycetemcomitans: generation of defined leukotoxin-negative mutants

To develop targeted gene integration in the periodontal pathogen Actinobacillus actinomycetemcomitans, a ColE1-based, spectinomycin-resistant plasmid containing a segment of the leukotoxin gene was electroporated into strain JP2. In all of the stable spectinomycin-resistant transformants that arose, the plasmid had recombined into the genomic leukotoxin locus since ColE1-based vectors cannot replicate extrachromosomally in A. actinomycetemcomitans. Directed genomic integration was then used to construct a leukotoxin-negative strain by transforming the leukotoxin-producing strain JP2 with a ColE1-based plasmid containing an internal fragment of the leukotoxin gene. Cytotoxicity assays proved that these transformants had < 0.1% of the leukotoxin activity of the parental strain. These results demonstrate that integration-based approaches can be used for generating isogenic mutants in specific virulence genes in A. actinomycetemcomitans.

Construction of first-generation lactococcal integrative cloning vectors

Using a randomly-cloned, HindIII-digested, chromosomal fragment from Lactococcus lactis subsp. lactis LM0230, first-generation lactococcal integrative cloning vectors were developed. Through dideoxy DNA sequence analysis, the cloned chromosomal DNA fragment was determined to be 1026 base pairs. Southern hybridization studies demonstrated applicability of the integrative vector to other strains of L. lactis and L. lactis subsp. cremoris. Identification of a single NruI site near the middle of the chromosomal fragment allowed insertion of the erythromycin (Em)-resistance (eryr) gene obtained from L. lactis IL1837. Integration of the eryr gene into the L. lactis LM0230 chromosome was achieved by a Campbell-like recombination. The nisin (Nis)-resistance (nisr) gene from L. lactis IL1904 was inserted into the NruI site in a separate clone and integration into the L. lactis LM0230 chromosome was achieved via a replacement recombination event following electroporation of the linearized nisr fragment flanked by the cloned chromosomal DNA. Transformants grown in the absence of either Em or Nis for > 200 generations and subsequently transferred to various concentrations of the selectable agent confirmed the stability of the integrated genes. Further studies involving the Nis-resistant (NisR) transformant suggested that the integrated nisr gene may be amplifying within the host chromosome.

Characterization of allelic replacement in Streptococcus parasanguis: transformation and homologous recombination in a 'nontransformable' streptococcus

We have obtained transformants of Streptococcus parasanguis FW213 containing allelic replacements in several chromosomal loci. Transformation occurred following electroporation with nonreplicating plasmids carrying two antibiotic-resistance-encoding genes, one of which is inserted into DNA homologous to the chromosomal target. In contrast with other streptococci, S. parasanguis FW213 is not transformed by linear DNA. Mutations in nonreplicating plasmid DNA preferentially replaced their homologues in the S. parasanguis FW213 chromosome by a double-crossover homologous recombination event, as shown by the fact that over 90% of transformants were sensitive to the vector-coded antibiotic marker. Southern blot analysis of these transformants showed that three of the five target loci had been mutated, and that the wild-type sequence had been replaced by the mutated sequence carried on the transforming plasmid. This bias toward homologous replacement rather than integration of the entire transforming plasmid DNA simplifies site-specific mutagenesis and genetic analysis of the streptococcal chromosome.

Integration and gene replacement in the Lactococcus lactis lac operon: induction of a cryptic phospho-beta-glucosidase in LacG-deficient strains

Insertions, replacement mutations, and deletions were introduced via single or double crossover recombination into the lacE (enzyme IIlac) and lacG (phospho-beta-galactosidase) genes of the Lactococcus lactis chromosomal lacABCDFEGX operon. LacG production was abolished in strains missing the lacG gene or carrying multicopy insertions in the lacE gene that affected expression of the lacG gene. However, these LacG-deficient strains could still ferment lactose slowly and were found to contain an enzymatic activity that hydrolyzed the chromogenic substrate o-nitrophenyl-beta-D-galactopyranoside phosphate. Induction of this phospho-beta-glycohydrolase activity coincided with the appearance of a new 55-kDa protein cross-reacting with anti-LacG antibodies that had a size similar to that of LacG but a higher isoelectric point (pI 5.2) and was not found in wild-type cells during growth on lactose. Since the phospho-beta-glycohydrolase activity and this protein with a pI of 5.2 were highly induced in both mutant and wild-type cells during growth on cellobiose that is likely to be transported via a phosphoenolpyruvate-dependent phosphotransferase system, we propose that this induced activity is a phospho-beta-glucosidase that also hydrolyzes lactose-6-phosphate.

Effect of X-Prolyl Dipeptidyl Aminopeptidase Deficiency on Lactococcus lactis

The genetic determinant ( pepXP ) of an X-prolyl dipeptidyl aminopeptidase (PepXP) has recently been cloned and sequenced from both Lactococcus lactis subsp. cremoris (B. Mayo, J. Kok, K. Venema, W. Bockelmann, M. Teuber, H. Reinke, and G. Venema, Appl. Environ. Microbiol. 57:38-44, 1991) and L. lactis subsp. lactis (M. Nardi, M.-C. Chopin, A. Chopin, M.-M. Cals, and J.-C. Gripon, Appl. Environ. Microbiol. 57:45-50, 1991). To examine the possible role of the enzyme in the breakdown of caseins required for lactococci to grow in milk, integration vectors have been constructed and used to specifically inactivate the pepXP gene. After inactivation of the gene in L. lactis subsp. lactis MG1363, which is Lac - and Prt - , the Lac + Prt + determinants were transferred by conjugation by using L. lactis subsp. lactis 712 as the donor. Since growth of the transconjugants relative to the PepXP + strains was not retarded in milk, it was concluded that PepXP is not essential for growth in that medium. It was also demonstrated that the open reading frame ORF1, upstream of pepXP , was not required for PepXP activity in L. lactis. A marked difference between metenkephalin degradation patterns was observed after incubation of this pentapeptide with cell extracts obtained from wild-type lactococci and pepXP mutants. Therefore, altered expression of the pepXP -encoded general dipeptidyl aminopeptidase activity may change the peptide composition of fermented milk products.

High-efficiency gene inactivation and replacement system for gram-positive bacteria

A system for high-efficiency single- and double-crossover homologous integration in gram-positive bacteria has been developed, with Lactococcus lactis as a model system. The system is based on a thermosensitive broad-host-range rolling-circle plasmid, pG+host5, which contains a pBR322 replicon for propagation in Escherichia coli at 37 degrees C. A nested set of L. lactis chromosomal fragments cloned onto pG+host5 were used to show that the single-crossover integration frequency was logarithmically proportional to the length of homology for DNA fragments between 0.35 and 2.5 kb. Using random chromosomal 1-kb fragments, we showed that homologous integration can occur along the entire chromosome. We made use of the reported stimulatory effect of rolling-circle replication on intramolecular recombination to develop a protocol for gene replacement. Cultures were first maintained at 37 degrees C to select for a bacterial population enriched for plasmid integrants; activation of the integrated rolling-circle plasmid by a temperature shift to 28 degrees C resulted in efficient plasmid excision by homologous recombination and replacement of a chromosomal gene by the plasmid-carried modified copy. More than 50% of cells underwent replacement recombination when selection was applied for the replacing gene. Between 1 and 40% of cells underwent replacement recombination when no selection was applied. Chromosomal insertions and deletions were obtained in this way. These results show that gene replacement can be obtained at an extremely high efficiency by making use of the thermosensitive rolling-circle nature of the delivery vector. This procedure is applicable to numerous gram-positive bacteria.

Transposable elements in Lactococci: a review

Genetic studies have identified the presence of transposable elements within the genus Lactococcus, which includes industrially important microorganisms used in the production of fermented dairy products. Three insertion sequences have been fully characterized in addition to several reports of transpositionlike events. The three insertion sequence elements, ISS1, IS904, and IS981, exhibit the physical and genetic properties characteristic of known insertion sequences. They are closely related to insertion sequences isolated from a wide variety of microorganisms. In lactococci, insertion sequence elements are associated with lactose and sucrose metabolism, proteinase activity, nisin production and immunity, conjugal transfer determinants, and bacteriophage resistance, which are attributes significant for growth in a milk environment. The characteristics, involvement in lactococcal evolution, and recent developments as tools for genetic engineering of the lactococcal elements are discussed.

Novel streptococcal-integration shuttle vectors for gene cloning and inactivation

Seven new streptococcal integration shuttle vectors have been constructed which contain different antibiotic-resistance-encoding genes capable of expression in both Streptococcus sp. and Escherichia coli. These plasmids can replicate in E. coli, but not in streptococci because of the absence of a streptococcal origin of replication. The size, antibiotic resistance, and number of unique restriction sites available for cloning for each plasmid are as follows: pSF141 (7.6 kb, CmR and KmR, 7 sites), pSF143 (5.7 kb, TcR, 6 sites), pSF148 (7.3 kb, CmR and SpR, 7 sites), pDL285 (3.4 kb, KmR, 3 sites), pDL286 (3.1 kb, SpR, 4 sites), pSF151 (3.5 kb, KmR, 10 sites), pSF152 (3.2 kb, SpR, 9 sites). If these plasmids carry a fragment of streptococcal DNA they can specifically integrate into the chromosome via Campbell-like, homologous recombination. Therefore, they should be useful for gene inactivation, cloning, chromosomal walking, or linkage analysis in streptococci. The availability of these integration plasmids resistant to different antibiotics, along with the previously described plasmid, pVA891 (ErR), should also allow the construction of mutants possessing multiple insertionally inactivated genes useful for a variety of genetic studies.

IS946-mediated integration of heterologous DNA into the genome of Lactococcus lactis subsp. lactis

The lactococcal insertion sequence IS946 was used to construct suicide vectors for insertion of heterologous DNA into chromosomal and plasmid sequences of Lactococcus lactis subsp. lactis. Electroporation of L. lactis strains, including the recombination-deficient strain MMS362, with the suicide vector pTRK145 yielded 10(1) to 10(3) transformants per micrograms of DNA. pTRK145 insertions occurred primarily in the chromosome, with one insertion detected in a resident plasmid. Vector-specific probes identified junction fragments that varied among transformants, indicating random insertions of pTRK145.

New tools for the physical and genetic mapping of Lactococcus strains

Tools for the genetic and physical analysis of the Lactococcus lactis subsp. lactis genome were developed. Plasmid pRC1 does not replicate in Gram+ bacteria; it contains unique ApaI, NotI and SmaI restriction sites and an erythromycin-resistance (ErR) encoding gene, ermAM, functional in L. lactis subsp. lactis. When a chromosomal L. lactis subsp. lactis DNA fragment was cloned into this vector, the resulting plasmid became integrated, after transformation, into the bacterial chromosome by homologous recombination in a Campbell-like manner. The integration lead to the generation of new rare restriction sites near to the host fragment. This procedure allows precise mapping of cloned genes onto the chromosomal restriction map. The mapping of the his operon of L. lactis subsp. lactis provides an illustration. The cloning into pRC1 of an IS element able to transpose into the chromosome of the target cell, gave rise to an integration plasmid able to insert randomly rare restriction sites onto the bacterial chromosome. The L. lactis IS element, ISS1RS, was cloned into pRC1, yielding pRL1. Pulsed-field gel electrophoresis analysis of ErR clones obtained after transformation with pRL1, showed that this plasmid was stably integrated at a number of different sites in the L. lactis subsp. lactis chromosome, via transposition. Plasmids pRC1 and pRL1 can greatly facilitate the construction of the physical and genetic map of the chromosome of lactococcal strains.

Lactococcal plasmid pWV01 as an integration vector for lactococci

A Bacillus subtilis strain was constructed that contained the repA gene of the lactococcal plasmid pWVO1 in its chromosome. This strain was used to construct the pWVO1-based integration vector pINT1, which lacked the repA gene. The 3.6-kb plasmid pINT1 was not able to replicate in Lactococcus lactis MG1363 but integrated into the chromosome via a Campbell-like mechanism when a lactococcal chromosomal DNA fragment was incorporated in the plasmid. Transformants were obtained that carried between one and four plasmid copies, in stable tandem arrangement on the chromosome. The results indicate that pWVO1 can be used for the development of a Campbell-like integration system fully derived of lactococcal DNA, with which stable multiple copies of any gene of interest can be generated in the lactococcal chromosome.