Effects of inducing expression of cloned genes for the F0 proton channel of the Escherichia coli F1F0 ATPase

Rotary properties of hybrid F1-ATPases consisting of subunits from different species

F₁-ATPase (F₁) is an ATP-driven rotary motor protein ubiquitously found in many species as the catalytic portion of F_oF₁-ATP synthase. Despite the highly conserved amino acid sequence of the catalytic core subunits: α and β, F₁ shows diversity in the maximum catalytic turnover rate V_max and the number of rotary steps per turn. To study the design principle of F₁, we prepared eight hybrid F₁s composed of subunits from two of three genuine F₁s: thermophilic Bacillus PS3 (TF₁), bovine mitochondria (bMF₁), and Paracoccus denitrificans (PdF₁), differing in the V_max and the number of rotary steps. The V_max of the hybrids can be well fitted by a quadratic model highlighting the dominant roles of β and the couplings between α-β. Although there exist no simple rules on which subunit dominantly determines the number of steps, our findings show that the stepping behavior is characterized by the combination of all subunits.

Revealing the Metabolic Activity of Persisters in Mycobacteria by Single-Cell D2O Raman Imaging Spectroscopy

The metabolic activity of bacterial cells largely differentiates even within a clonal population. Such metabolic divergence among cells is thought to play an important role for phenotypic adaptation to ever-changing environmental conditions, such as antibiotic persistence. It has long been thought that persisters are in a state called dormancy, in which cells are metabolically inactive and do not grow. However, recent studies suggest that some types of persisters are not necessarily dormant, triggering a debate about the mechanisms of persisters. Here, we combined single-cell Raman imaging spectroscopy and D₂O labeling to analyze metabolic activities of bacterial persister cells. Metabolically active cells uptake deuterium through metabolic processes and give distinct C-D Raman bands, which are direct indicators of metabolic activity. Using this imaging method, we characterized the metabolic activity of Mycobacterium smegmatis, a fast-growing model for Mycobacterium tuberculosis. We found that persister cells of M. smegmatis show certain metabolic activity and active cell growth in the presence of the antibiotic rifampicin. Interestingly, persistence is not correlated with growth rate prior to antibiotic exposure. These results show that dormancy is not responsible for the persistence of M. smegmatis cells against rifampicin, suggesting that the mechanism of persistence largely varies depending on the type of antibiotics and bacteria. Our results successfully demonstrate the potential of our perfusion-based single-cell D₂O Raman imaging system for the analysis of the metabolic activity and growth of bacterial persister cells.

ATP Synthesis by Oxidative Phosphorylation

The F1F0-ATP synthase (EC 3.6.1.34) is a remarkable enzyme that functions as a rotary motor. It is found in the inner membranes of Escherichia coli and is responsible for the synthesis of ATP in response to an electrochemical proton gradient. Under some conditions, the enzyme functions reversibly and uses the energy of ATP hydrolysis to generate the gradient. The ATP synthase is composed of eight different polypeptide subunits in a stoichiometry of α3β3γδεab2c10. Traditionally they were divided into two physically separable units: an F1 that catalyzes ATP hydrolysis (α3β3γδε) and a membrane-bound F0 sector that transports protons (ab2c10). In terms of rotary function, the subunits can be divided into rotor subunits (γεc10) and stator subunits (α3β3δab2). The stator subunits include six nucleotide binding sites, three catalytic and three noncatalytic, formed primarily by the β and α subunits, respectively. The stator also includes a peripheral stalk composed of δ and b subunits, and part of the proton channel in subunit a. Among the rotor subunits, the c subunits form a ring in the membrane, and interact with subunit a to form the proton channel. Subunits γ and ε bind to the c-ring subunits, and also communicate with the catalytic sites through interactions with α and β subunits. The eight subunits are expressed from a single operon, and posttranscriptional processing and translational regulation ensure that the polypeptides are made at the proper stoichiometry. Recent studies, including those of other species, have elucidated many structural and rotary properties of this enzyme.

Biogenesis of membrane bound respiratory complexes in Escherichia coli

Escherichia coli is one of the preferred bacteria for studies on the energetics and regulation of respiration. Respiratory chains consist of primary dehydrogenases and terminal reductases or oxidases linked by quinones. In order to assemble this complex arrangement of protein complexes, synthesis of the subunits occurs in the cytoplasm followed by assembly in the cytoplasm and/or membrane, the incorporation of metal or organic cofactors and the anchoring of the complex to the membrane. In the case of exported metalloproteins, synthesis, assembly and incorporation of metal cofactors must be completed before translocation across the cytoplasmic membrane. Coordination data on these processes is, however, scarce. In this review, we discuss the various processes that respiratory proteins must undergo for correct assembly and functional coupling to the electron transport chain in E. coli. Targeting to and translocation across the membrane together with cofactor synthesis and insertion are discussed in a general manner followed by a review of the coordinated biogenesis of individual respiratory enzyme complexes. Lastly, we address the supramolecular organization of respiratory enzymes into supercomplexes and their localization to specialized domains in the membrane.

Sequential processing from cell lysis to protein assay on a chip enabling the optimization of an F(1)-ATPase single molecule assay condition

We developed an integrated protein assay device, "Single Molecule MicroTAS (SMM)," which enables cell lysis, protein extraction, purification, and activity assay. The assay was achieved at the single-molecule scale for a genetically engineered protein, F(1)-ATPase, which is the smallest known rotary motor. A cell lysis condition, with a wide range of applied voltages (50-250 V) and other optimized values (pulse width: 50 micros; duty: 0.01%; electrode gap: 25 microm; total flow rate: 5 microL min(-1)) provided a high enough protein concentration for the assay. Successively, the protein was extracted and purified by specific binding in a microfluidic channel. During the assay process, the diffusion effect of lysate between a two-phase laminar flow contributes to optimizing the single-molecule assay condition, because the concentration of the original lysate from the E. coli solution is too high to assay. To achieve the most efficient assay condition, the protein diffusion effect on the assay was experimentally and numerically evaluated. The results reveal that, in our experimental conditions, concentrations of F(1) and other contaminated effluents are optimized for the F(1) rotational assay at a channel position. The adenosine triphosphate (ATP)-driven rotation speed measured in the SMM was compatible with that obtained by conventional purification and assay. Such a sequential process from cell lysis to assay proves that the SMM is an example of a sample-in-answer-out system for F(1) protein evaluation.

Neither helix in the coiled coil region of the axle of F1-ATPase plays a significant role in torque production

F₁-ATPase is an ATP-driven rotary molecular motor in which the central γ-subunit rotates inside the cylinder made of α₃β₃ subunits. The amino and carboxy termini of the γ-subunit form the axle, an α-helical coiled coil that deeply penetrates the stator cylinder. We previously truncated the axle step by step, starting with the longer carboxy terminus and then cutting both termini at the same levels, resulting in a slower yet considerably powerful rotation. Here we examine the role of each helix by truncating only the carboxy terminus by 25–40 amino-acid residues. Longer truncation impaired the stability of the motor complex severely: 40 deletions failed to yield rotating the complex. Up to 36 deletions, however, the mutants produced an apparent torque at nearly half of the wild-type torque, independent of truncation length. Time-averaged rotary speeds were low because of load-dependent stumbling at 120° intervals, even with saturating ATP. Comparison with our previous work indicates that half the normal torque is produced at the orifice of the stator. The very tip of the carboxy terminus adds the other half, whereas neither helix in the middle of the axle contributes much to torque generation and the rapid progress of catalysis. None of the residues of the entire axle played a specific decisive role in rotation.

The product of uncI gene in F1Fo-ATP synthase operon plays a chaperone-like role to assist c-ring assembly

Bacterial operons for F(1)F(o)-ATP synthase typically include an uncI gene that encodes a function-unknown small hydrophobic protein. When we expressed a hybrid F(1)F(o) (F(1) from thermophilic Bacillus PS3 and Na(+)-translocating F(o) from Propionigenium modestum) in Escherchia coli cells, we found that uncI derived from P. modestum was indispensable to produce active enzyme; without uncI, c-subunits in F(1)F(o) existed as monomers but not as functional c(11)-ring. When uncI was expressed from another plasmid at the same time, active F(1)F(o) with c(11)-ring was produced. A plasmid containing only uncI and c-subunit gene produced c(11)-ring, but a plasmid containing only c-subunit gene did not. Direct interaction of UncI protein with c-subunits was suggested from copurification of His-tagged UncI protein and c-subunits, both in the state of c(11)-ring and c-monomers. Na(+) induced dissociation of His-tagged UncI protein from c(11)-ring but not from c-monomers. These results show that UncI is a chaperone-like protein that assists c(11)-ring assembly from c-monomers in the membrane.

The rotor tip inside a bearing of a thermophilic F1-ATPase is dispensable for torque generation

F(1)-ATPase is an ATP-driven rotary molecular motor in which the central gamma-subunit rotates inside a stator cylinder made of alpha(3)beta(3) subunits. To elucidate the role of rotor-stator interactions in torque generation, we truncated the gamma-subunit at its carboxyl terminus, which forms an alpha helix that penetrates deeply into the stator cylinder. We used an alpha(3)beta(3)gamma subcomplex of F(1)-ATPase derived from thermophilic Bacillus PS3 and expressed it in Escherichia coli. We could obtain purified subcomplexes in which 14, 17, or 21 amino-acid residues were deleted. The rotary characteristics of the truncated mutants, monitored by attaching a duplex of 0.49-microm beads to the gamma-subunit, did not differ greatly from those of the wild-type over the ATP concentrations of 20 nM-2 mM, the most conspicuous effect being approximately 50% reduction in torque and approximately 70% reduction in the rate of ATP binding upon deletion of 21 residues. The ATP hydrolysis activity estimated in bulk samples was more seriously affected. The 21-deletion mutant, in particular, was >10-fold less active, but this is likely due to instability of this subcomplex. For torque generation, though not for rapid catalysis, most of the rotor-stator contacts on the deeper half of the penetrating portion of the gamma-subunit are dispensable.

Probing conformations of the beta subunit of F0F1-ATP synthase in catalysis

A subcomplex of F0F1-ATP synthase (F0F1), alpha3beta3gamma, was shown to undergo the conformation(s) during ATP hydrolysis in which two of the three beta subunits have the "Closed" conformation simultaneously (CC conformation) [S.P. Tsunoda, E. Muneyuki, T. Amano, M. Yoshida, H. Noji, Cross-linking of two beta subunits in the closed conformation in F1-ATPase, J. Biol. Chem. 274 (1999) 5701-5706]. This was examined by the inter-subunit disulfide cross-linking between two mutant beta(I386C)s that was formed readily only when the enzyme was in the CC conformation. Here, we adopted the same method for the holoenzyme F0F1 from Bacillus PS3 and found that the CC conformation was generated during ATP hydrolysis but barely during ATP synthesis. The experiments using F0F1 with the epsilon subunit lacking C-terminal helices further suggest that this difference is related to dynamic nature of the epsilon subunit and that ATP synthesis is accelerated when it takes the pathway involving the CC conformation.

Voltage-gated proton channels and other proton transfer pathways

Proton channels exist in a wide variety of membrane proteins where they transport protons rapidly and efficiently. Usually the proton pathway is formed mainly by water molecules present in the protein, but its function is regulated by titratable groups on critical amino acid residues in the pathway. All proton channels conduct protons by a hydrogen-bonded chain mechanism in which the proton hops from one water or titratable group to the next. Voltage-gated proton channels represent a specific subset of proton channels that have voltage- and time-dependent gating like other ion channels. However, they differ from most ion channels in their extraordinarily high selectivity, tiny conductance, strong temperature and deuterium isotope effects on conductance and gating kinetics, and insensitivity to block by steric occlusion. Gating of H(+) channels is regulated tightly by pH and voltage, ensuring that they open only when the electrochemical gradient is outward. Thus they function to extrude acid from cells. H(+) channels are expressed in many cells. During the respiratory burst in phagocytes, H(+) current compensates for electron extrusion by NADPH oxidase. Most evidence indicates that the H(+) channel is not part of the NADPH oxidase complex, but rather is a distinct and as yet unidentified molecule.

A functional His-tagged c subunit of the Escherichia coli F-type ATPase/Synthase

The c subunit of the Escherichia coli F0 has been tagged with a hexahistidine motif at its C-terminus. The tagged subunit is capable of forming functional F0 complexes that translocate protons in the absence of the F1 complex. In the presence of F1, the two sectors associate and display all biochemical activities of the wildtype enzyme: DCCD-inhibitable ATPase activity, ATP synthase activity, and ATP-dependent proton pumping. The enzyme can be solubilized and purified as an intact complex under native conditions on immobilized-metal affinity chromatography (IMAC) resin. The purified complex can be reincorporated into liposomes and demonstrates ATP-dependent proton pumping activity. Hexahistine tags placed at the N-terminus, in contrast, were all inactive. These experiments demonstrate the feasibility of tagging the c subunit for further studies of the F0 and suggest an important role for the N-terminus of the c subunit in either assembly or function of the protein.

The role of the DELSEED motif of the beta subunit in rotation of F1-ATPase

F(1)-ATPase is a rotary motor protein, and ATP hydrolysis generates torque at the interface between the gamma subunit, a rotor shaft, and the alpha(3)beta(3) substructure, a stator ring. The region of conserved acidic "DELSEED" motif of the beta subunit has a contact with gamma subunit and has been assumed to be involved in torque generation. Using the thermophilic alpha(3)beta(3)gamma complex in which the corresponding sequence is DELSDED, we replaced each residue and all five acidic residues in this sequence with alanine. In addition, each of two conserved residues at the counterpart contact position of gamma subunit was also replaced. Surprisingly, all of these mutants rotated with as much torque as the wild-type. We conclude that side chains of the DELSEED motif of the beta subunit do not have a direct role in torque generation.

Cross-linking of two beta subunits in the closed conformation in F1-ATPase

In the crystal structure of mitochondrial F1-ATPase, two beta subunits with a bound Mg-nucleotide are in "closed" conformations, whereas the third beta subunit without bound nucleotide is in an "open" conformation. In this "CCO" (beta-closed beta-closed beta-open) conformational state, Ile-390s of the two closed beta subunits, even though they are separated by an intervening alpha subunit, have a direct contact. We replaced the equivalent Ile of the alpha3beta3gamma subcomplex of thermophilic F1-ATPase with Cys and observed the formation of the beta-beta cross-link through a disulfide bond. The analysis of conditions required for the cross-link formation indicates that: (i) F1-ATPase takes the CCO conformation when two catalytic sites are filled with Mg-nucleotide, (ii) intermediate(s) with the CCO conformation are generated during catalytic cycle, (iii) the Mg-ADP inhibited form is in the CCO conformation, and (iv) F1-ATPase dwells in conformational state(s) other than CCO when only one (or none) of catalytic sites is filled by Mg-nucleotide or when catalytic sites are filled by Mg2+-free nucleotide. The alpha3beta3gamma subcomplex containing the beta-beta cross-link retained the activity of uni-site catalysis but lost that of multiple catalytic turnover, suggesting that open-closed transition of beta subunits is required for the rotation of gamma subunit but not for hydrolysis of a single ATP.

Linkage map of Escherichia coli K-12, edition 10: the traditional map

This map is an update of the edition 9 map by Berlyn et al. (M. K. B. Berlyn, K. B. Low, and K. E. Rudd, p. 1715-1902, in F. C. Neidhardt et al., ed., Escherichia coli and Salmonella: cellular and molecular biology, 2nd ed., vol. 2, 1996). It uses coordinates established by the completed sequence, expressed as 100 minutes for the entire circular map, and adds new genes discovered and established since 1996 and eliminates those shown to correspond to other known genes. The latter are included as synonyms. An alphabetical list of genes showing map location, synonyms, the protein or RNA product of the gene, phenotypes of mutants, and reference citations is provided. In addition to genes known to correspond to gene sequences, other genes, often older, that are described by phenotype and older mapping techniques and that have not been correlated with sequences are included.

Formation of the b subunit dimer is necessary for interaction with F1-ATPase

In earlier work, we [McCormick, K. A., et al. (1993) J. Biol. Chem. 268, 24683-24691] observed that mutations at Ala-79 of the b subunit affect assembly of F1F0 ATP synthase. Polypeptides modeled on the soluble portion of the b subunit (bsol) with substitutions at the position corresponding to Ala-79 have been used to investigate secondary structure and dimerization of the b subunit. Circular dichroism spectra and chymotrypsin digestion experiments suggested that the recombinant polypeptides with Ala-79 substitutions assumed conformations similar to the bsol polypeptide. However, cross-linking studies of the Ala-79 substitution bsol polypeptides revealed defects in dimerization. The efficiency of dimer formation appeared to be related to the capacity of the altered bsol polypeptides for competing with F1-ATPase for binding to F1-depleted membrane vesicles. Ala-79 substitution polypeptides displaying limited dimerization, such as bsol Ala-79-->Leu, were shown to elute with F1-ATPase during size exclusion chromatography, suggesting a specific interaction. Sedimentation equilibrium studies indicated that 8% of the bsol Ala-79-->Leu polypeptide was in the form of a 30.6 kDa dimer and 92% a 15.3 kDa monomer. When the dimer concentration of bsol Ala-79-->Leu was normalized to the concentration of bsol, both had virtually identical capacities for competing with F1-depleted membrane vesicles for binding F1-ATPase. The result indicated that the amount of dimer formed is directly proportional to its ability to bind F1-ATPase. This suggests that formation of the b subunit dimer may be a necessary step preceding F1-ATPase binding in the assembly of the enzyme complex.

ATP synthesis by F0F1-ATP synthase independent of noncatalytic nucleotide binding sites and insensitive to azide inhibition

ATP hydrolyzing activity of a mutant alpha3beta3gamma subcomplex of F0F1-ATP synthase (DeltaNC) from the thermophilic Bacillus PS3, which lacked noncatalytic nucleotide binding sites, was inactivated completely soon after starting the reaction (Matsui, T., Muneyuki, E. , Honda, M., Allison, W. S., Dou, C., and Yoshida, M. (1997) J. Biol. Chem. 272, 8215-8221). This inactivation is caused by rapid accumulation of the "MgADP inhibited form" which, in the case of wild-type enzyme, would be relieved by ATP binding to noncatalytic sites. We reconstituted F0F1-ATP synthase into liposomes together with bacteriorhodopsin and measured illumination-driven ATP synthesis. Remarkably, DeltaNC F0F1-ATP synthase catalyzed continuous turnover of ATP synthesis while it could not promote ATP-driven proton translocation. ATP synthesis by DeltaNC F0F1-ATP synthase, as well as wild-type enzyme, proceeded even in the presence of azide, an inhibitor of ATP hydrolysis that stabilizes the MgADP inhibited form. The time course of ATP synthesis by DeltaNC F0F1-ATP synthase was linear, and gradual acceleration to the maximal rate, which was observed for the wild-type enzyme, was not seen. Thus, ATP synthesis can proceed without nucleotide binding to noncatalytic sites even though the rate is sub-maximal. These results indicate that the MgADP inhibited form is not produced in ATP synthesis reaction, and in this regard, ATP synthesis may not be a simple reversal of ATP hydrolysis.

Catalytic activity of the alpha3beta3gamma complex of F1-ATPase without noncatalytic nucleotide binding site

A mutant alpha3beta3gamma complex of F1-ATPase from thermophilic Bacillus PS3 was generated in which noncatalytic nucleotide binding sites lost their ability to bind nucleotides. It hydrolyzed ATP at an initial rate with cooperative kinetics (Km(1), 4 microM; Km(2), 135 microM) similar to the wild-type complex. However, the initial rate decayed rapidly to an inactivated form. Since the inactivated mutant complex contained 1.5 mol of ADP/mol of complex, this inactivation seemed to be caused by entrapping inhibitory MgADP in a catalytic site. Indeed, the mutant complex was nearly completely inactivated by a 10 min prior incubation with equimolar MgADP. Analysis of the progress of inactivation after initiation of ATP hydrolysis as a function of ATP concentration indicated that the inactivation was optimal at ATP concentrations in the range of Km(1). In the presence of ATP, the wild-type complex dissociated the inhibitory [3H]ADP preloaded onto a catalytic site whereas the mutant complex did not. Lauryl dimethylamineoxide promoted release of preloaded inhibitory [3H]ADP in an ATP-dependent manner and partly restored the activity of the inactivated mutant complex. Addition of ATP promoted single-site hydrolysis of 2',3'-O-(2,4,6-trinitrophenyl)-ATP preloaded at a single catalytic site of the mutant complex. These results indicate that intact noncatalytic sites are essential for continuous catalytic turnover of the F1-ATPase but are not essential for catalytic cooperativity of F1-ATPase observed at ATP concentrations below approximately 300 microM.

Catalytic activities of alpha3beta3gamma complexes of F1-ATPase with 1, 2, or 3 incompetent catalytic sites

In order to know how many functional catalytic sites are necessary for ATPase activity of F1-ATPase from a thermophilic Bacillus PS3, a new method of isolating homogeneous preparations of the alpha3beta3gamma complex with 1, 2, or 3 incompetent catalytic sites was developed. Ten glutamic acids (Glu.Tag) were linked to the C terminus of the catalytically incompetent beta(E190Q) subunit. The Glu.Tag itself did not affect ATPase activity of the complexes. Two kinds of alpha3beta3gamma complexes, one containing beta(wild-type) and the other Glu.Tag-linked beta(E190Q), were mixed, urea-denatured, and dialyzed, and alpha3beta3gamma complexes were reconstituted. Each of the complexes containing a different number of Glu.Tag-linked beta(E190Q) was separated by anion-exchange chromatography and analyzed. The results were as follows. 1) Normal steady-state ATPase activity requires three intact catalytic sites. 2) Chase-acceleration, a catalytic cooperativity, requires at least two intact catalytic sites. 3) Single-site catalysis can be mediated by a single intact catalytic site alone. Rescrambling of subunits between complexes could occur when the complex was aged under certain conditions, and this might be one of the reasons for previous contradictory results (Miwa, K., Ohtsubo, M., Denda, K., Hisabori, T., Date, T., and Yoshida, M.(1989) J. Biochem. (Tokyo) 106, 730-734).

Phylogenetic analyses of the homologous transmembrane channel-forming proteins of the F0F1-ATPases of bacteria, chloroplasts and mitochondria

Sequences of the three integral membrane subunits (subunits a, b and c) of the F0 sector of the proton-translocating F-type (F0F1-) ATPases of bacteria, chloroplasts and mitochondria have been analysed. All homologous-sequenced proteins of these subunits, comprising three distinct families, have been identified by database searches, and the homologous protein sequences have been aligned and analysed for phylogenetic relatedness. The results serve to define the relationships of the members of each of these three families of proteins, to identify regions of relative conservation, and to define relative rates of evolutionary divergence. Of these three subunits, c-subunits exhibited the slowest rate of evolutionary divergence, b-subunits exhibited the most rapid rate of evolutionary divergence, and a-subunits exhibited an intermediate rate of evolutionary divergence. The results allow definition of the relative times of occurrence of specific events during evolutionary history, such as the intragenic duplication event that gave rise to large c-subunits in eukaryotic vacuolar-type ATPases after eukaryotes diverged from archaea, and the extragenic duplication of F-type ATPase b-subunits that occurred in blue-green bacteria before the advent of chloroplasts. The results generally show that the three F0 subunits evolved as a unit from a primordial set of genes without appreciable horizontal transmission of the encoding genetic information although a few possible exceptions were noted.

Expression of the wild-type and the Cys-/Trp-less alpha 3 beta 3 gamma complex of thermophilic F1-ATPase in Escherichia coli

The alpha, beta and gamma subunits of F1-ATPase from thermophilic Bacillus PS3 were expressed in Escherichia coli cells simultaneously in large amounts. Most of the expressed subunits assembled into a form of alpha 3 beta 3 gamma complex in E. coli cells and this complex was easily purified to homogeneity. The recombinant alpha 3 beta 3 gamma complex thus obtained showed similar enzymatic properties to the alpha 3 beta 3 gamma complex obtained by in vitro reconstitution from individual subunits (Yokoyama, K. et al. (1989) J. Biol. Chem. 264, 21837-21841) except that the former had several-fold higher ATPase activity than the latter. Using this expression system, a mutant alpha 3 beta 3 gamma complex with no Trp and Cys was generated by replacing alpha Cys193 and alpha Trp463 with Ser and Phe, respectively. This mutant complex was functionally intact, indicating both residues are not essential for catalysis. The Cys-/Trp-less complex is a convenient 'second wild type' enzyme from which one can generate mutants with Trp (as a fluorescent probe) or Cys (as an acceptor of a variety of probes) at desired positions without concern for 'background' Trp and Cys residues.

Assembly of F0 sector of Escherichia coli H+ ATP synthase. Interdependence of subunit insertion into the membrane

The F0 sector of the Escherichia coli H+ transporting ATP synthase is composed of a complex of three subunits, each of which traverses the inner membrane. We have studied the interdependence of subunit insertion into the membrane in a series of chromosomal mutants in which the primary mutation prevented insertion of one of the F0 subunits. Subunit insertion was assessed using Western blots of mutant membrane preparations. Subunit b and subunit c were found to insert into the membrane independently of the other two F0 subunits. On the other hand, subunit a was not inserted into membranes that lacked either subunit b or subunit c. The conclusion that subunit a insertion is dependent upon the co-insertion of subunits b and c differs from the conclusion of several studies, where subunits were expressed from multicopy plasmids.

Role of the delta subunit in enhancing proton conduction through the F0 of the Escherichia coli F1F0 ATPase

We studied the effect of the delta subunit of the Escherichia coli F1 ATPase on the proton permeability of the F0 proton channel synthesized and assembled in vivo. Membranes isolated from an unc deletion strain carrying a plasmid containing the genes for the F0 subunits and the delta subunit were significantly more permeable to protons than membranes isolated from the same strain carrying a plasmid containing the genes for the F0 subunits alone. This increased proton permeability could be blocked by treatment with either dicyclohexyl-carbodiimide or purified F1, both of which block proton conduction through the F0. After reconstitution with purified F1 in vitro, both membrane preparations could couple proton pumping to ATP hydrolysis. These results demonstrate that an interaction between the delta subunit and the F0 during synthesis and assembly produces a significant change in the proton permeability of the F0 proton channel.

Mutations in the delta subunit influence the assembly of F1F0 ATP synthase in Escherichia coli

Missense mutations affecting Asp-161 and Ser-163 in the delta subunit of F1F0 ATP synthase have been generated. Although most substitutions allowed substantial enzyme function, the delta Asp-161-->Pro substitution resulted in a loss of enzyme activity. The loss of activity was attributable to a structural failure altering assembly of the enzyme complex.

Assembly of the Escherichia coli F1F0 ATPase, a large multimeric membrane-bound enzyme

The F1F0 proton translocating ATPase of Escherichia coli is a large membrane-bound enzyme complex consisting of more than 20 polypeptides that are encoded by the unc operon. Besides being a system for analysing the enzymology of ATP synthesis and energy coupling, the ATPase is a model system for determining how large oligomeric membrane-bound proteins are synthesized and assembled. The assembly of the ATPase involves differential gene expression and assembly of the subunits within the membrane and with each other. This review discusses the influence of F1 subunits on the assembly and proton permeability of the F0 proton channel, and the possible advantages to assembly of the particular arrangement of genes in the unc operon.