CelG from Clostridium cellulolyticum: a multidomain endoglucanase acting efficiently on crystalline cellulose

Role of carbohydrate binding modules, CBM3A and CBM3B in stability and catalysis by a β-1,4 endoglucanase, AtGH9C-CBM3A-CBM3B from Acetivibrio thermocellus ATCC 27405

A recombinant β-1,4 endoglucanase, AtGH9C-CBM3A-CBM3B from Acetivibrio thermocellus ATCC27405 was explored for biochemical properties and the role of its associated CBMs in catalysis. The gene expressing full-length multi-modular β-1,4-endoglucanase (AtGH9C-CBM3A-CBM3B) and its truncated derivatives (AtGH9C-CBM3A, AtGH9C, CBM3A and CBM3B) were independently cloned and expressed in Escherichia coli BL21(DE3) cells and purified. AtGH9C-CBM3A-CBM3B showed maximal activity at 55 °C and pH 7.5. AtGH9C-CBM3A-CBM3B exhibited highest activity against carboxy methyl cellulose (58.8 U/mg) followed by lichenan (44.5 U/mg), β-glucan (36.2 U/mg) and hydroxy ethyl cellulose (17.9 U/mg). Catalytic module, AtGH9C showed insignificant activity against the substrates, signifying the essential requirement of CBMs in catalysis. AtGH9C-CBM3A-CBM3B displayed stability in pH range, 6.0-9.0 and thermostability up to 60 °C for 90 min with unfolding transition midpoint (T_m) of 65 °C. The generation of cellotetraose and other higher oligosaccharides by AtGH9C-CBM3A-CBM3B confirmed it as an endo-β-1,4-glucanase. AtGH9C activity was partially recovered by the addition of equimolar concentration of CBM3A, CBM3B or CBM3A + CBM3B by 47 %, 13 % or 50 %, respectively. Moreover, the associated CBMs imparted thermostability to the catalytic module, AtGH9C. These results showed that the physical association of AtGH9C with its associated CBMs and the cross-talk between CBMs are necessary for AtGH9C-CBM3A-CBM3B in effective cellulose catalysis.

Contribution of calcium ligands in substrate binding and product release in the Acetovibrio thermocellus glycoside hydrolase family 9 cellulase CelR

Enzymatic deconstruction of lignocellulosic biomass is crucial to establishment of the renewable biofuel and bioproduct economy. Better understanding of these enzymes, including their catalytic and binding domains, and other features offer potential avenues for improvement. Glycoside hydrolase family 9 (GH9) enzymes are attractive targets because they have members that exhibit exo- and endo-cellulolytic activity, processivity of reaction, and thermostability. This study examines a GH9 from Acetovibrio thermocellus ATCC 27405, AtCelR containing a catalytic domain and a carbohydrate binding module (CBM3c). Crystal structures of the enzyme without substrate, bound to cellohexaose (substrate) or cellobiose (product), show the positioning of ligands to calcium and adjacent residues in the catalytic domain that may contribute to substrate binding and facilitate product release. We also investigated the properties of the enzyme engineered to contain an additional carbohydrate binding module (CBM3a). Relative to the catalytic domain alone, CBM3a gave improved binding for Avicel (a crystalline form of cellulose), and catalytic efficiency (kcat/KM) was improved 40× with both CBM3c and CBM3a present. However, because of the molecular weight added by CBM3a, the specific activity of the engineered enzyme was not increased relative to the native construct consisting of only the catalytic and CBM3c domains. This work provides new insight into a potential role of the conserved calcium in the catalytic domain and identifies contributions and limitations of domain engineering for AtCelR and perhaps other GH9 enzymes.

Processive binding mechanism of Cel9G from Clostridium cellulovorans: molecular dynamics and free energy landscape investigations

The processive binding mechanism of cellulose by Cel9G from C. cellulovorans was investigated by MD and metadynamics simulations.

QM/MM investigation of the catalytic mechanism of processive endoglucanase Cel9G from Clostridium cellulovorans

Carbohydrate degradation catalyzed by glucoside hydrolases (GHs) is a major mechanism in biomass conversion. GH family 9 endoglucanase (Cel9G) from Clostridium cellulovorans, a typical multimodular enzyme, contains a catalytic domain closely linked to a family 3c carbohydrate-binding module (CBM3c). Unlike the conventional behavior proposed for other carbohydrate-binding modules, CBM3c has a direct impact on catalytic activity. In this work, extensive molecular dynamics (MD) simulations were employed to clarify the functional role of CBM3c. Furthermore, the detailed catalytic mechanism of Cel9G was investigated at the atomistic level using the combined quantum mechanical and molecular mechanical (QM/MM) method. Based on these simulations, owing to the rigidity of the peptide linker, CBM3c may affect the enzymatic activity via direct interactions with alpha helix 4 of GH9, especially with the K123 and H125 residues. In addition, using cellohexaose as a substrate, the QM/MM MD simulations confirmed that this enzyme can cleave the β-1,4-glycosidic linkage via an inverting mechanism. An oxocarbenium ion-like transition state was located with a barrier height of 19.6 kcal mol^-1. Furthermore, the G(-1) pyranose unit preferentially adopted a distorted ¹S₅/⁴H₅ conformer in the enzyme-substrate complex. For the cleavage of the glycosidic bond, we were able to identify a plausible route (¹S₅/⁴H₅ → [⁴H₅/⁴E]^# → ⁴C₁) from the reactant to the product at the G(-1) site.

Characterization of three bacterial glycoside hydrolase family 9 endoglucanases with different modular architectures isolated from a compost metagenome

BACKGROUND

Environmental bacteria express a wide diversity of glycoside hydrolases (GH). Screening and characterization of GH from metagenomic sources provides an insight into biomass degradation strategies of non-cultivated prokaryotes.

METHODS

In the present report, we screened a compost metagenome for lignocellulolytic activities and identified six genes encoding enzymes belonging to family GH9 (GH9a-f). Three of these enzymes (GH9b, GH9d and GH9e) were successfully expressed and characterized.

RESULTS

A phylogenetic analysis of the catalytic domain of pro- and eukaryotic GH9 enzymes suggested the existence of two major subgroups. Bacterial GH9s displayed a wide variety of modular architectures and those harboring an N-terminal Ig-like domain, such as GH9b and GH9d, segregated from the remainder. We purified and characterized GH9 endoglucanases from both subgroups and examined their stabilities, substrate specificities and product profiles. GH9e exhibited an original hydrolysis pattern, liberating an elevated proportion of oligosaccharides longer than cellobiose. All of the enzymes exhibited processive behavior and a synergistic action on crystalline cellulose. Synergy was also evidenced between GH9d and a GH48 enzyme identified from the same metagenome.

CONCLUSIONS

The characterized GH9 enzymes displayed different modular architectures and distinct substrate and product profiles. The presence of a cellulose binding domain was shown to be necessary for binding and digestion of insoluble cellulosic substrates, but not for processivity.

GENERAL SIGNIFICANCE

The identification of six GH9 enzymes from a compost metagenome and the functional variety of three characterized members highlight the importance of this enzyme family in bacterial biomass deconstruction.

Computational modeling and small-angle X-ray scattering based structure analysis and identifying ligand cleavage mechanism by processive endocellulase of family 9 glycoside hydrolase (HtGH9) from Hungateiclostridium thermocellum ATCC 27405

The cellulases of family 9 glycoside hydrolase with subtle difference in amino acid sequence have shown different types of catalytic activities such as endo-, exo- or processive endocellulase. However, the reason behind the different types of catalytic activities still unclear. In this study, the processive endocellulase, HtGH9 of family 9 GH from Hungateiclostridium thermocellum was modeled by homology modeling. The catalytic module (HtGH9t) of HtGH9 modeled structure displayed the (α/α)₆ barrel topology and associated family 3 carbohydrate binding module (HtCBM3c) displayed β-sandwich fold. Ramachandran plot of HtGH9 modeled structure displayed all the amino acid residues in allowed region except Asn225 and Asp317. Secondary structure analysis of modeled HtGH9 showed the presence of 41.3% α-helices and 11.0% β-strands which was validated through circular dichroism analysis that showed the presence of 42.6% α-helices and 14.5% β-strands. Molecular Dynamic (MD) simulation of HtGH9 structure for 50 ns showed Root Mean Square Deviation (RMSD), 0.84 nm and radius of gyration (Rg) 3.1 nm. The Small-angle X-ray scattering of HtGH9 confirmed the monodisperse state. The radius of gyration for globular shape (Rg) was 5.50 ± 0.15 nm and for rod shape (Rc) by Guinier plot was 2.0 nm. The loop formed by amino acid residues, 264-276 towards one end of the catalytic site of HtGH9 forms a barrier, that blocks the non-reducing end of the cellulose chain causing the processive cleavage resulting in the release of cellotetraose. The position of the corresponding loop in cellulases of family 9 GH is responsible for different types of cleavage patterns.

Catalytic subunit exchanges in the cellulosomes produced by Ruminiclostridium cellulolyticum suggest unexpected dynamics and adaptability of their enzymatic composition

Cellulosomes are complex nanomachines produced by cellulolytic anaerobic bacteria such as Ruminiclostridium cellulolyticum (formerly known as Clostridium cellulolyticum). Cellulosomes are composed of a scaffoldin protein displaying several cohesin modules on which enzymatic components can bind to through their dockerin module. Although cellulosomes have been studied for decades, very little is known about the dynamics of complex assembly. We have investigated the ability of some dockerin-bearing enzymes to chase the catalytic subunits already bound onto a miniscaffoldin displaying a single cohesin. The stability of the preassembled enzyme-scaffoldin complex appears to depend on the nature of the dockerin, and we have identified a key position in the dockerin sequence that is involved in the stability of the complex with the cohesin. Depending on the residue occupying this position, the dockerin can establish with the cohesin partner either a nearly irreversible or a reversible interaction, independently of the catalytic domain associated with the dockerin. Site-directed mutagenesis of this residue can convert a dockerin able to form a highly stable complex with the miniscaffoldin into a reversible complex forming one and vice versa. We also show that refunctionalization can occur with natural purified cellulosomes. Altogether, our results shed light on the dynamics of cellulosomes, especially their capacity to be remodeled even after their assembly is 'achieved', suggesting an unforeseen adaptability of their enzymatic composition over time.

Turning a potent family-9 free cellulase into an operational cellulosomal component and vice versa

Ruminiclostridium cellulolyticum and Lachnoclostridium phytofermentans are cellulolytic clostridia either producing extracellular multienzymatic complexes termed cellulosomes or secreting free cellulases respectively. In the free state, the cellulase Cel9A secreted by L. phytofermentans is much more active on crystalline cellulose than any cellulosomal family-9 enzyme produced by R. cellulolyticum. Nevertheless, the incorporation of Cel9A in vitro in hybrid cellulosomes was formerly shown to generate artificial complexes with altered activity, whereas its incorporation in vivo in native R. cellulolyticum cellulosomes resulted in a strain displaying a weakened cellulolytic phenotype. In this study, we investigated why Cel9A is so potent in the free state but functions poorly as a cellulosomal component, in contrast to the most similar enzyme synthesized by R. cellulolyticum, Cel9G, weakly active in the free state but whose activity on crystalline cellulose is drastically increased in cellulosomes. We show that the removal of the C-terminal moiety of Cel9A encompassing the two X2 modules and the family-3b carbohydrate binding module (CBM3b), reduces its activity on crystalline cellulose. Grafting a dockerin module further diminishes the activity, but this truncated cellulosomal form of Cel9A displays important synergies in hybrid cellulosomes with the pivotal family-48 cellulosomal enzyme of R. cellulolyticum. The exact inverse approach was applied to the cellulosomal Cel9G. Grafting the two X2 modules and the CBM3b of Cel9A to Cel9G strongly increases its activity on crystalline cellulose, to reach Cel9A activity levels. Altogether these data emphasize the specific features required to generate an efficient free or cellulosomal family-9 cellulase.

Biochemical characterization and low-resolution SAXS structure of two-domain endoglucanase BlCel9 from Bacillus licheniformis

Lignocellulose feedstock constitutes the most abundant carbon source in the biosphere; however, its recalcitrance remains a challenge for microbial conversion into biofuel and bioproducts. Bacillus licheniformis is a microbial mesophilic bacterium capable of secreting a large number of glycoside hydrolase (GH) enzymes, including a glycoside hydrolase from GH family 9 (BlCel9). Here, we conducted biochemical and biophysical studies of recombinant BlCel9, and its low-resolution molecular shape was retrieved from small angle X-ray scattering (SAXS) data. BlCel9 is an endoglucanase exhibiting maximum catalytic efficiency at pH 7.0 and 60 °C. Furthermore, it retains 80% of catalytic activity within a broad range of pH values (5.5-8.5) and temperatures (up to 50 °C) for extended periods of time (over 48 h). It exhibits the highest hydrolytic activity against phosphoric acid swollen cellulose (PASC), followed by bacterial cellulose (BC), filter paper (FP), and to a lesser extent carboxymethylcellulose (CMC). The HPAEC-PAD analysis of the hydrolytic products demonstrated that the end product of the enzymatic hydrolysis is primarily cellobiose, and also small amounts of glucose, cellotriose, and cellotetraose are produced. SAXS data analysis revealed that the enzyme adopts a monomeric state in solution and has a molecular mass of 65.8 kDa as estimated from SAXS data. The BlCel9 has an elongated shape composed of an N-terminal family 3 carbohydrate-binding module (CBM3c) and a C-terminal GH9 catalytic domain joined together by 20 amino acid residue long linker peptides. The domains are closely juxtaposed in an extended conformation and form a relatively rigid structure in solution, indicating that the interactions between the CBM3c and GH9 catalytic domains might play a key role in cooperative cellulose biomass recognition and hydrolysis.

Production of a functional cell wall-anchored minicellulosome by recombinant Clostridium acetobutylicum ATCC 824

BACKGROUND

The use of fossil fuels is no longer tenable. Not only are they a finite resource, their use is damaging the environment through pollution and global warming. Alternative, environmentally friendly, renewable sources of chemicals and fuels are required. To date, the focus has been on using lignocellulose as a feedstock for microbial fermentation. However, its recalcitrance to deconstruction is making the development of economic processes extremely challenging. One solution is the generation of an organism suitable for use in consolidated bioprocessing (CBP), i.e. one able to both hydrolyse lignocellulose and ferment the released sugars, and this represents an important goal for synthetic biology. We aim to use synthetic biology to develop the solventogenic bacterium C. acetobutylicum as a CBP organism through the introduction of a cellulosome, a complex of cellulolytic enzymes bound to a scaffold protein called a scaffoldin. In previous work, we were able to demonstrate the in vivo production of a C. thermocellum-derived minicellulosome by recombinant strains of C. acetobutylicum, and aim to develop on this success, addressing potential issues with the previous strategy.

RESULTS

The genes for the cellulosomal enzymes Cel9G, Cel48F, and Xyn10A from C. cellulolyticum were integrated into the C. acetobutylicum genome using Allele-Coupled Exchange (ACE) technology, along with a miniscaffoldin derived from C. cellulolyticum CipC. The possibility of anchoring the recombinant cellulosome to the cell surface using the native sortase system was assessed, and the cellulolytic properties of the recombinant strains were assayed via plate growth, batch fermentation and sugar release assays.

CONCLUSIONS

We have been able to demonstrate the synthesis and in vivo assembly of a four-component minicellulosome by recombinant C. acetobutylicum strains. Furthermore, we have been able to anchor a minicellulosome to the C. acetobutylicum cell wall by the use of the native sortase system. The recombinant strains display an improved growth phenotype on xylan and an increase in released reducing sugar from several substrates including untreated powdered wheat straw. This constitutes an important milestone towards the development of a truly cellulolytic strain suitable for CBP.

Mechanisms involved in xyloglucan catabolism by the cellulosome-producing bacterium Ruminiclostridium cellulolyticum

Xyloglucan, a ubiquitous highly branched plant polysaccharide, was found to be rapidly degraded and metabolized by the cellulosome-producing bacterium Ruminiclostridium cellulolyticum. Our study shows that at least four cellulosomal enzymes displaying either endo- or exoxyloglucanase activities, achieve the extracellular degradation of xyloglucan into 4-glucosyl backbone xyloglucan oligosaccharides. The released oligosaccharides (composed of up to 9 monosaccharides) are subsequently imported by a highly specific ATP-binding cassette transporter (ABC-transporter), the expression of the corresponding genes being strongly induced by xyloglucan. This polysaccharide also triggers the synthesis of cytoplasmic β-galactosidase, α-xylosidase, and β-glucosidase that act sequentially to convert the imported oligosaccharides into galactose, xylose, glucose and unexpectedly cellobiose. Thus R. cellulolyticum has developed an energy-saving strategy to metabolize this hemicellulosic polysaccharide that relies on the action of the extracellular cellulosomes, a highly specialized ABC-transporter, and cytoplasmic enzymes acting in a specific order. This strategy appears to be widespread among cellulosome-producing mesophilic bacteria which display highly similar gene clusters encoding the cytosolic enzymes and the ABC-transporter.

Reassembly and co-crystallization of a family 9 processive endoglucanase from its component parts: structural and functional significance of the intermodular linker

Non-cellulosomal processive endoglucanase 9I (Cel9I) from Clostridium thermocellum is a modular protein, consisting of a family-9 glycoside hydrolase (GH9) catalytic module and two family-3 carbohydrate-binding modules (CBM3c and CBM3b), separated by linker regions. GH9 does not show cellulase activity when expressed without CBM3c and CBM3b and the presence of the CBM3c was previously shown to be essential for endoglucanase activity. Physical reassociation of independently expressed GH9 and CBM3c modules (containing linker sequences) restored 60-70% of the intact Cel9I endocellulase activity. However, the mechanism responsible for recovery of activity remained unclear. In this work we independently expressed recombinant GH9 and CBM3c with and without their interconnecting linker in Escherichia coli. We crystallized and determined the molecular structure of the GH9/linker-CBM3c heterodimer at a resolution of 1.68 Å to understand the functional and structural importance of the mutual spatial orientation of the modules and the role of the interconnecting linker during their re-association. Enzyme activity assays and isothermal titration calorimetry were performed to study and compare the effect of the linker on the re-association. The results indicated that reassembly of the modules could also occur without the linker, albeit with only very low recovery of endoglucanase activity. We propose that the linker regions in the GH9/CBM3c endoglucanases are important for spatial organization and fixation of the modules into functional enzymes.

Combining free and aggregated cellulolytic systems in the cellulosome-producing bacterium Ruminiclostridium cellulolyticum

BACKGROUND

Ruminiclostridium cellulolyticum and Lachnoclostridium phytofermentans (formerly known as Clostridium cellulolyticum and Clostridium phytofermentans, respectively) are anaerobic bacteria that developed different strategies to depolymerize the cellulose and the related plant cell wall polysaccharides. Thus, R. cellulolyticum produces large extracellular multi-enzyme complexes termed cellulosomes, while L. phytofermentans secretes in the environment some cellulose-degrading enzymes as free enzymes. In the present study, the major cellulase from L. phytofermentans was introduced as a free enzyme or as a cellulosomal component in R. cellulolyticum to improve its cellulolytic capacities.

RESULTS

The gene at locus Cphy_3367 encoding the major cellulase Cel9A from L. phytofermentans and an engineered gene coding for a modified enzyme harboring a R. cellulolyticum C-terminal dockerin were cloned in an expression vector. After electrotransformation of R. cellulolyticum, both forms of Cel9A were found to be secreted by the corresponding recombinant strains. On minimal medium containing microcrystalline cellulose as the sole source of carbon, the strain secreting the free Cel9A started to grow sooner and consumed cellulose faster than the strain producing the cellulosomal form of Cel9A, or the control strain carrying an empty expression vector. All strains reached the same final cell density but the strain producing the cellulosomal form of Cel9A was unable to completely consume the available cellulose even after an extended cultivation time, conversely to the two other strains. Analyses of their cellulosomes showed that the engineered form of Cel9A bearing a dockerin was successfully incorporated in the complexes, but its integration induced an important release of regular cellulosomal components such as the major cellulase Cel48F, which severely impaired the activity of the complexes on cellulose. In contrast, the cellulosomes synthesized by the control and the free Cel9A-secreting strains displayed similar composition and activity. Finally, the most cellulolytic strain secreting free Cel9A, was also characterized by an early production of lactate, acetate and ethanol as compared to the control strain.

CONCLUSIONS

Our study shows that the cellulolytic capacity of R. cellulolyticum can be augmented by supplementing the cellulosomes with a free cellulase originating from L. phytofermentans, whereas integration of the heterologous enzyme in the cellulosomes is rather unfavorable.

Heterologous Overexpression of a Mutant Termite Cellulase Gene inEscherichia coliby DNA Shuffling of Four Orthologous Parental cDNAs

Among cellulase genes, those of animals are known for their difficulty in overexpression. We constructed a chimeric library by family shuffling of endo-beta-1,4-glucanase genes from four different termite species (Reticulitermes speratus, Nasutitermes takasagoensis, Coptotermes formosanus, and Coptotermes acinaciformis) sharing 78.5-96% homology in amino acid sequence. The constructed library was screened by Congo red plate assay combined with 96-well micro-enzyme assay, and clones showing enhanced CMCase activities were obtained. The mutated genes were overexpressed in Escherichia coli intracellularly as an active form. The endo-beta-1,4-glucanase (CMCase) activity in soluble fractions of E. coli harboring the mutant genes was 20-30 fold higher than that of wild-type genes. The mutant enzyme showed high activity against CMC and properties similar to those of the native enzymes.

Characterization of all family-9 glycoside hydrolases synthesized by the cellulosome-producing bacterium Clostridium cellulolyticum

The genome of Clostridium cellulolyticum encodes 13 GH9 enzymes that display seven distinct domain organizations. All but one contain a dockerin module and were formerly detected in the cellulosomes, but only three of them were previously studied (Cel9E, Cel9G, and Cel9M). In this study, the 10 uncharacterized GH9 enzymes were overproduced in Escherichia coli and purified, and their activity pattern was investigated in the free state or in cellulosome chimeras with key cellulosomal cellulases. The newly purified GH9 enzymes, including those that share similar organization, all exhibited distinct activity patterns, various binding capacities on cellulosic substrates, and different synergies with pivotal cellulases in mini-cellulosomes. Furthermore, one enzyme (Cel9X) was characterized as the first genuine endoxyloglucanase belonging to this family, with no activity on soluble and insoluble celluloses. Another GH9 enzyme (Cel9V), whose sequence is 78% identical to the cellulosomal cellulase Cel9E, was found inactive in the free and complexed states on all tested substrates. The sole noncellulosomal GH9 (Cel9W) is a cellulase displaying a broad substrate specificity, whose engineered form bearing a dockerin can act synergistically in minicomplexes. Finally, incorporation of all GH9 cellulases in trivalent cellulosome chimera containing Cel48F and Cel9G generated a mixture of heterogeneous mini-cellulosomes that exhibit more activity on crystalline cellulose than the best homogeneous tri-functional complex. Altogether, our data emphasize the importance of GH9 diversity in bacterial cellulosomes, confirm that Cel9G is the most synergistic GH9 with the major endoprocessive cellulase Cel48F, but also identify Cel9U as an important cellulosomal component during cellulose depolymerization.

Molecular and biochemical analyses of CbCel9A/Cel48A, a highly secreted multi-modular cellulase by Caldicellulosiruptor bescii during growth on crystalline cellulose

During growth on crystalline cellulose, the thermophilic bacterium Caldicellulosiruptor bescii secretes several cellulose-degrading enzymes. Among these enzymes is CelA (CbCel9A/Cel48A), which is reported as the most highly secreted cellulolytic enzyme in this bacterium. CbCel9A/Cel48A is a large multi-modular polypeptide, composed of an N-terminal catalytic glycoside hydrolase family 9 (GH9) module and a C-terminal GH48 catalytic module that are separated by a family 3c carbohydrate-binding module (CBM3c) and two identical CBM3bs. The wild-type CbCel9A/Cel48A and its truncational mutants were expressed in Bacillus megaterium and Escherichia coli, respectively. The wild-type polypeptide released twice the amount of glucose equivalents from Avicel than its truncational mutant that lacks the GH48 catalytic module. The truncational mutant harboring the GH9 module and the CBM3c was more thermostable than the wild-type protein, likely due to its compact structure. The main hydrolytic activity was present in the GH9 catalytic module, while the truncational mutant containing the GH48 module and the three CBMs was ineffective in degradation of either crystalline or amorphous cellulose. Interestingly, the GH9 and/or GH48 catalytic modules containing the CBM3bs form low-density particles during hydrolysis of crystalline cellulose. Moreover, TM3 (GH9/CBM3c) and TM2 (GH48 with three CBM3 modules) synergistically hydrolyze crystalline cellulose. Deletion of the CBM3bs or mutations that compromised their binding activity suggested that these CBMs are important during hydrolysis of crystalline cellulose. In agreement with this observation, seven of nine genes in a C. bescii gene cluster predicted to encode cellulose-degrading enzymes harbor CBM3bs. Based on our results, we hypothesize that C. bescii uses the GH48 module and the CBM3bs in CbCel9A/Cel48A to destabilize certain regions of crystalline cellulose for attack by the highly active GH9 module and other endoglucanases produced by this hyperthermophilic bacterium.

Unraveling enzyme discrimination during cellulosome assembly independent of cohesin-dockerin affinity

Bacterial cellulosomes are generally believed to assemble at random, like those produced by Clostridium cellulolyticum. They are composed of one scaffolding protein bearing eight homologous type I cohesins that bind to any of the type I dockerins borne by the 62 cellulosomal subunits, thus generating highly heterogeneous complexes. In the present study, the heterogeneity and random assembly of the cellulosomes were evaluated with a simpler model: a miniscaffoldin containing three C. cellulolyticum cohesins and three cellulases of the same bacterium bearing the cognate dockerin (Cel5A, Cel48F, and Cel9G). Surprisingly, rather than the expected randomized integration of enzymes, the assembly of the minicellulosome generated only three distinct types of complex out of the 10 possible combinations, thus indicating preferential integration of enzymes upon binding to the scaffoldin. A hybrid scaffoldin that displays one cohesin from C. cellulolyticum and one from C. thermocellum, thus allowing sequential integration of enzymes, was exploited to further characterize this phenomenon. The initial binding of a given enzyme to the C. thermocellum cohesin was found to influence the type of enzyme that subsequently bound to the C. cellulolyticum cohesin. The preferential integration appears to be related to the length of the inter-cohesin linker. The data indicate that the binding of a cellulosomal enzyme to a cohesin has a direct influence on the dockerin-bearing proteins that will subsequently interact with adjacent cohesins. Thus, despite the general lack of specificity of the cohesin-dockerin interaction within a given species and type, bacterial cellulosomes are not necessarily assembled at random.

Uniform magnetic core/shell microspheres functionalized with Ni2+-iminodiacetic acid for one step purification and immobilization of his-tagged enzymes

A facile approach has been developed to synthesize Fe3O4/PMG (poly (N,N'-methylenebisacrylamide-co-glycidyl methacrylate)) core/shell microspheres using distillation-precipitation polymerization. Treating PMG shell with iminodiacetic acid (IDA) and Ni2+ yields composite microspheres of Fe3O4/PMG/IDA-Ni2+. The Ni2+ ions loaded on the surface of microspheres provide abundant docking sites for immobilization of histidine-tagged proteins. The high saturation magnetization of Fe3O4/PMG (23 emu/g), determined by vibrating sample magnetometer (VSM), allows an easy separation of the microspheres from solution under an external magnetic field. The composite microspheres were used to purify two His-tagged cellulolytic enzymes (Cel48F and Cel9G) directly from crude cell lysates with high binding affinity, capacity, and specificity. The microspheres can be recycled for many times without significant loss of binding capacity to enzymes. The immobilized enzymes on the surface of microspheres well retain their biological activities in degradation of cellulose. These materials show great potential in the biomedical and biotechnological applications that require low-cost purification of recombinant proteins and instant enzyme immobilization at an industrial scale.

Functional display of complex cellulosomes on the yeast surface via adaptive assembly

A new adaptive strategy was developed for the ex vivo assembly of a functional tetravalent designer cellulosome on the yeast cell surface. The design is based on the use of (1) a surface-bound anchoring scaffoldin composed of two divergent cohesin domains, (2) two dockerin-tagged adaptor scaffoldins to amplify the number of enzyme loading sites based on the specific dockerin-cohesin interaction with the anchoring scaffoldin, and (3) two dockerin-tagged enzymatic subunits (the endoglucanse Gt and the β-glucosidase Bglf) for cellulose hydrolysis. Cells displaying the tetravalent cellulosome on the surface exhibited a 4.2-fold enhancement in the hydrolysis of phosphoric acid swollen cellulose (PASC) compared with free enzymes. More importantly, cells displaying the tetravalent celluosome also exhibited an ~2-fold increase in ethanol production compared with cells displaying a divalent cellulosome using a similar enzyme loading. These results clearly indicate the more crucial role of enzyme proximity than just simply increasing the enzyme loading on the overall cellulosomal synergy. To the best of our knowledge, this is the first report that exploits the natural adaptive assembly strategy in creating artificial cellulosome structures. The unique feature of the anchoring and the adaptor scaffoldin strategy to amplify the number of enzymatic subunits can be easily extended to more complex cellulosomal structures to achieve an even higher level of enzyme synergy.

Genome-wide analysis of acetivibrio cellulolyticus provides a blueprint of an elaborate cellulosome system

BACKGROUND

Microbial degradation of plant cell walls and its conversion to sugars and other byproducts is a key step in the carbon cycle on Earth. In order to process heterogeneous plant-derived biomass, specialized anaerobic bacteria use an elaborate multi-enzyme cellulosome complex to synergistically deconstruct cellulosic substrates. The cellulosome was first discovered in the cellulolytic thermophile, Clostridium thermocellum, and much of our knowledge of this intriguing type of protein composite is based on the cellulosome of this environmentally and biotechnologically important bacterium. The recently sequenced genome of the cellulolytic mesophile, Acetivibrio cellulolyticus, allows detailed comparison of the cellulosomes of these two select cellulosome-producing bacteria.

RESULTS

Comprehensive analysis of the A. cellulolyticus draft genome sequence revealed a very sophisticated cellulosome system. Compared to C. thermocellum, the cellulosomal architecture of A. cellulolyticus is much more extensive, whereby the genome encodes for twice the number of cohesin- and dockerin-containing proteins. The A. cellulolyticus genome has thus evolved an inflated number of 143 dockerin-containing genes, coding for multimodular proteins with distinctive catalytic and carbohydrate-binding modules that play critical roles in biomass degradation. Additionally, 41 putative cohesin modules distributed in 16 different scaffoldin proteins were identified in the genome, representing a broader diversity and modularity than those of Clostridium thermocellum. Although many of the A. cellulolyticus scaffoldins appear in unconventional modular combinations, elements of the basic structural scaffoldins are maintained in both species. In addition, both species exhibit similarly elaborate cell-anchoring and cellulosome-related gene- regulatory elements.

CONCLUSIONS

This work portrays a particularly intricate, cell-surface cellulosome system in A. cellulolyticus and provides a blueprint for examining the specific roles of the various cellulosomal components in the degradation of complex carbohydrate substrates of the plant cell wall by the bacterium.

Biochemical and mutational analyses of a multidomain cellulase/mannanase from Caldicellulosiruptor bescii

Thermophilic cellulases and hemicellulases are of significant interest to the biofuel industry due to their perceived advantages over their mesophilic counterparts. We describe here biochemical and mutational analyses of Caldicellulosiruptor bescii Cel9B/Man5A (CbCel9B/Man5A), a highly thermophilic enzyme. As one of the highly secreted proteins of C. bescii, the enzyme is likely to be critical to nutrient acquisition by the bacterium. CbCel9B/Man5A is a modular protein composed of three carbohydrate-binding modules flanked at the N terminus and the C terminus by a glycoside hydrolase family 9 (GH9) module and a GH5 module, respectively. Based on truncational analysis of the polypeptide, the cellulase and mannanase activities within CbCel9B/Man5A were assigned to the N- and C-terminal modules, respectively. CbCel9B/Man5A and its truncational mutants, in general, exhibited a pH optimum of ∼5.5 and a temperature optimum of 85°C. However, at this temperature, thermostability was very low. After 24 h of incubation at 75°C, the wild-type protein maintained 43% activity, whereas a truncated mutant, TM1, maintained 75% activity. The catalytic efficiency with phosphoric acid swollen cellulose as a substrate for the wild-type protein was 7.2 s(-1) ml/mg, and deleting the GH5 module led to a mutant (TM1) with a 2-fold increase in this kinetic parameter. Deletion of the GH9 module also increased the apparent k(cat) of the truncated mutant TM5 on several mannan-based substrates; however, a concomitant increase in the K(m) led to a decrease in the catalytic efficiencies on all substrates. These observations lead us to postulate that the two catalytic activities are coupled in the polypeptide.

Scaffoldin modules serving as "cargo" domains to promote the secretion of heterologous cellulosomal cellulases by Clostridium acetobutylicum

The secretion of large heterologous cellulases by Clostridium acetobutylicum was formerly shown to be deleterious. To circumvent this issue, various scaffoldins' modules were grafted at their N termini. Family 3a cellulose binding module combined with an X2 module(s) was found to trigger the secretion of Clostridium cellulolyticum cellulases by the solventogenic bacterium.

The issue of secretion in heterologous expression of Clostridium cellulolyticum cellulase-encoding genes in Clostridium acetobutylicum ATCC 824

The genes encoding the cellulases Cel5A, Cel8C, Cel9E, Cel48F, Cel9G, and Cel9M from Clostridium cellulolyticum were cloned in the C. acetobutylicum expression vector pSOS952 under the control of a Gram-positive constitutive promoter. The DNA encoding the native leader peptide of the heterologous cellulases was maintained. The transformation of the solventogenic bacterium with the corresponding vectors generated clones in the cases of Cel5A, Cel8C, and Cel9M. Analyses of the recombinant strains indicated that the three cellulases are secreted in an active form to the medium. A large fraction of the secreted cellulases, however, lost the C-terminal dockerin module. In contrast, with the plasmids pSOS952-cel9E, pSOS952-cel48F, and pSOS952-cel9G no colonies were obtained, suggesting that the expression of these genes has an inhibitory effect on growth. The deletion of the DNA encoding the leader peptide of Cel48F in pSOS952-cel48F, however, generated strains of C. acetobutylicum in which mature Cel48F accumulates in the cytoplasm. Thus, the growth inhibition observed when the wild-type cel48F gene is expressed seems related to the secretion of the cellulase. The weakening of the promoter, the coexpression of miniscaffoldin-encoding genes, or the replacement of the native signal sequence of Cel48F by that of secreted heterologous or endogenous proteins failed to generate strains secreting Cel48F. Taken together, our data suggest that a specific chaperone(s) involved in the secretion of the key family 48 cellulase, and probably Cel9G and Cel9E, is missing or insufficiently synthesized in C. acetobutylicum.

Comparison of family 9 cellulases from mesophilic and thermophilic bacteria

Cellulases containing a family 9 catalytic domain and a family 3c cellulose binding module (CBM3c) are important components of bacterial cellulolytic systems. We measured the temperature dependence of the activities of three homologs: Clostridium cellulolyticum Cel9G, Thermobifida fusca Cel9A, and C. thermocellum Cel9I. To directly compare their catalytic activities, we constructed six new versions of the enzymes in which the three GH9-CBM3c domains were fused to a dockerin both with and without a T. fusca fibronectin type 3 homology module (Fn3). We studied the activities of these enzymes on crystalline cellulose alone and in complex with a miniscaffoldin containing a cohesin and a CBM3a. The presence of Fn3 had no measurable effect on thermostability or cellulase activity. The GH9-CBM3c domains of Cel9A and Cel9I, however, were more active than the wild type when fused to a dockerin complexed to scaffoldin. The three cellulases in complex have similar activities on crystalline cellulose up to 60°C, but C. thermocellum Cel9I, the most thermostable of the three, remains highly active up to 80°C, where its activity is 1.9 times higher than at 60°C. We also compared the temperature-dependent activities of different versions of Cel9I (wild type or in complex with a miniscaffoldin) and found that the thermostable CBM is necessary for activity on crystalline cellulose at high temperatures. These results illustrate the significant benefits of working with thermostable enzymes at high temperatures, as well as the importance of retaining the stability of all modules involved in cellulose degradation.

Interplay between Clostridium thermocellum family 48 and family 9 cellulases in cellulosomal versus noncellulosomal states

The anaerobic, thermophilic cellulolytic bacterium Clostridium thermocellum is known for its elaborate cellulosome complex, but it also produces a separate free cellulase system. Among the free enzymes, the noncellulosomal enzyme Cel9I is a processive endoglucanase whose sequence and architecture are very similar to those of the cellulosomal enzyme Cel9R; likewise, the noncellulosomal exoglucanase Cel48Y is analogous to the principal cellulosomal enzyme Cel48S. In this study we used the designer cellulosome approach to examine the interplay of prominent cellulosomal and noncellulosomal cellulases from C. thermocellum. Toward this end, we converted the cellulosomal enzymes to noncellulosomal chimeras by swapping the dockerin module of the cellulosomal enzymes with a carbohydrate-binding module from the free enzyme analogues and vice versa. This enabled us to study the importance of the targeting effect of the free enzymes due to their carbohydrate-binding module and the proximity effect for cellulases on the designer cellulosome. C. thermocellum is the only cellulosome-producing bacterium known to express two different glycoside hydrolase family 48 enzymes and thus the only bacterial system that can currently be used for such studies. The different activities with crystalline cellulose were examined, and the results demonstrated that the individual chimeric cellulases were essentially equivalent to the corresponding wild-type analogues. The wild-type cellulases displayed a synergism of about 1.5-fold; the cellulosomal pair acted synergistically when they were converted into free enzymes, whereas the free enzymes acted synergistically mainly in the wild-type state. The targeting effect was found to be the major factor responsible for the elevated activity observed for these specific enzyme combinations, whereas the proximity effect appeared to play a negligible role.

Structure of a family 3b' carbohydrate-binding module from the Cel9V glycoside hydrolase from Clostridium thermocellum: structural diversity and implications for carbohydrate binding

Family 3 carbohydrate-binding modules (CBM3s) are associated with both cellulosomal scaffoldins and family 9 glycoside hydrolases (GH9s), which are multi-modular enzymes that act on cellulosic substrates. CBM3s bind cellulose. X-ray crystal structures of these modules have established an accepted cellulose-binding mechanism based on stacking interactions between the sugar rings of cellulose and a planar array of aromatic residues located on the CBM3 surface. These planar-strip residues are generally highly conserved, although some CBM3 sequences lack one or more of these residues. In particular, CBM3b' from Clostridium thermocellum Cel9V exhibits such sequence changes and fails to bind cellulosic substrates. A crystallographic investigation of CBM3b' has been initiated in order to understand the structural reason(s) for this inability. CBM3b' crystallized in space group C222(1) (diffraction was obtained to 2.0 A resolution in-house) with three independent molecules in the asymmetric unit and in space group P4(1)2(1)2 (diffraction was obtained to 1.79 A resolution in-house and to 1.30 A resolution at a synchrotron) with one molecule in the asymmetric unit. The molecular structure of Cel9V CBM3b' revealed that in addition to the loss of several cellulose-binding residues in the planar strip, changes in the backbone create a surface 'hump' which could interfere with the formation of cellulose-protein surface interactions and thus prevent binding to crystalline cellulose.

The prospects of cellulase-producing bacteria for the bioconversion of lignocellulosic biomass

Lignocellulosic biomass is a renewable and abundant resource with great potential for bioconversion to value-added bioproducts. However, the biorefining process remains economically unfeasible due to a lack of biocatalysts that can overcome costly hurdles such as cooling from high temperature, pumping of oxygen/stirring, and, neutralization from acidic or basic pH. The extreme environmental resistance of bacteria permits screening and isolation of novel cellulases to help overcome these challenges. Rapid, efficient cellulase screening techniques, using cellulase assays and metagenomic libraries, are a must. Rare cellulases with activities on soluble and crystalline cellulose have been isolated from strains of Paenibacillus and Bacillus and shown to have high thermostability and/or activity over a wide pH spectrum. While novel cellulases from strains like Cellulomonas flavigena and Terendinibacter turnerae, produce multifunctional cellulases with broader substrate utilization. These enzymes offer a framework for enhancement of cellulases including: specific activity, thermalstability, or end-product inhibition. In addition, anaerobic bacteria like the clostridia offer potential due to species capable of producing compound multienzyme complexes called cellulosomes. Cellulosomes provide synergy and close proximity of enzymes to substrate, increasing activity towards crystalline cellulose. This has lead to the construction of designer cellulosomes enhanced for specific substrate activity. Furthermore, cellulosome-producing Clostridium thermocellum and its ability to ferment sugars to ethanol; its amenability to co-culture and, recent advances in genetic engineering, offer a promising future in biofuels. The exploitation of bacteria in the search for improved enzymes or strategies provides a means to upgrade feasibility for lignocellulosic biomass conversion, ultimately providing means to a 'greener' technology.

Exploration of new geometries in cellulosome-like chimeras

In this study, novel cellulosome chimeras exhibiting atypical geometries and binding modes, wherein the targeting and proximity functions were directly incorporated as integral parts of the enzyme components, were designed. Two pivotal cellulosomal enzymes (family 48 and 9 cellulases) were thus appended with an efficient cellulose-binding module (CBM) and an optional cohesin and/or dockerin. Compared to the parental enzymes, the chimeric cellulases exhibited improved activity on crystalline cellulose as opposed to their reduced activity on amorphous cellulose. Nevertheless, the various complexes assembled using these engineered enzymes were somewhat less active on crystalline cellulose than the conventional designer cellulosomes containing the parental enzymes. The diminished activity appeared to reflect the number of protein-protein interactions within a given complex, which presumably impeded the mobility of their catalytic modules. The presence of numerous CBMs in a given complex, however, also reduced their performance. Furthermore, a "covalent cellulosome" that combines in a single polypeptide chain a CBM, together with family 48 and family 9 catalytic modules, also exhibited reduced activity. This study also revealed that the cohesin-dockerin interaction may be reversible under specific conditions. Taken together, the data demonstrate that cellulosome components can be used to generate higher-order functional composites and suggest that enzyme mobility is a critical parameter for cellulosome efficiency.

Incorporation of fungal cellulases in bacterial minicellulosomes yields viable, synergistically acting cellulolytic complexes

Artificial designer minicellulosomes comprise a chimeric scaffoldin that displays an optional cellulose-binding module (CBM) and bacterial cohesins from divergent species which bind strongly to enzymes engineered to bear complementary dockerins. Incorporation of cellulosomal cellulases from Clostridium cellulolyticum into minicellulosomes leads to artificial complexes with enhanced activity on crystalline cellulose, due to enzyme proximity and substrate targeting induced by the scaffoldin-borne CBM. In the present study, a bacterial dockerin was appended to the family 6 fungal cellulase Cel6A, produced by Neocallimastix patriciarum, for subsequent incorporation into minicellulosomes in combination with various cellulosomal cellulases from C. cellulolyticum. The binding of the fungal Cel6A with a bacterial family 5 endoglucanase onto chimeric miniscaffoldins had no impact on their activity toward crystalline cellulose. Replacement of the bacterial family 5 enzyme with homologous endoglucanase Cel5D from N. patriciarum bearing a clostridial dockerin gave similar results. In contrast, enzyme pairs comprising the fungal Cel6A and bacterial family 9 endoglucanases were substantially stimulated (up to 2.6-fold) by complexation on chimeric scaffoldins, compared to the free-enzyme system. Incorporation of enzyme pairs including Cel6A and a processive bacterial cellulase generally induced lower stimulation levels. Enhanced activity on crystalline cellulose appeared to result from either proximity or CBM effects alone but never from both simultaneously, unlike minicellulosomes composed exclusively of bacterial cellulases. The present study is the first demonstration that viable designer minicellulosomes can be produced that include (i) free (noncellulosomal) enzymes, (ii) fungal enzymes combined with bacterial enzymes, and (iii) a type (family 6) of cellulase never known to occur in natural cellulosomes.

Molecular and biochemical characterization of Ba-EGA, a cellulase secreted by Bacillus sp. AC-1 from Ampullaria crosseans

A novel gene (Ba-ega) of Bacillus sp. AC-1, encoding an endoglucanase (Ba-EGA), was cloned and expressed in Escherichia coli. Ba-ega, containing a 1,980-bp open reading frame (ORF), encoded a protein of 659 amino acids and had a molecular mass of 74.87 kDa. Ba-EGA was a modular enzyme composed of a family-9 glycosyl hydrolase catalytic module (CM9) and a family-3 carbohydrate-binding module (CBM3). To investigate the functions of the CBM3 and CM9, a number of truncated derivatives of Ba-EGA were constructed, and all were active. The catalytic module (rCM9) alone was less stable at high temperature than the recombinant Ba-EGA (rBa-EGA). The temperature stability for the complex of rCM9 and rCBM3 was still lower than rBa-EGA, but higher than rCM9 alone. These observations indicated the existence of a non-covalent interaction between CM9 and CBM3 that might strengthen the stability of CM9. However, this interaction is not strong enough to mimic the protective effect of the CBM in the wild-type enzyme.

Unravelling carbon metabolism in anaerobic cellulolytic bacteria

Carbon metabolism in anaerobic cellulolytic bacteria has been investigated essentially in Clostridium thermocellum, Clostridium cellulolyticum, Fibrobacter succinogenes, Ruminococcus flavefaciens, and Ruminococcus albus. While cellulose depolymerization into soluble sugars by various cellulases is undoubtedly the first step in bacterial metabolisation of cellulose, it is not the only one to consider. Among anaerobic cellulolytic bacteria, C. cellulolyticum has been investigated metabolically the most in the past few years. Summarizing metabolic flux analyses in continuous culture using either cellobiose (a soluble cellodextrin resulting from cellulose hydrolysis) or cellulose (an insoluble biopolymer), this review aims to stress the importance of the insoluble nature of a carbon source on bacterial metabolism. Furthermore, some general and specific traits of anaerobic cellulolytic bacteria trends, namely, the importance and benefits of (i) cellodextrins with degree of polymerization higher than 2, (ii) intracellular phosphorolytic cleavage, (iii) glycogen cycling on cell bioenergetics, and (iv) carbon overflows in regulation of carbon metabolism, as well as detrimental effects of (i) soluble sugars and (ii) acidic environment on bacterial growth. Future directions for improving bacterial cellulose degradation are discussed.

Enzyme diversity of the cellulolytic system produced by Clostridium cellulolyticum explored by two-dimensional analysis: identification of seven genes encoding new dockerin-containing proteins

The enzyme diversity of the cellulolytic system produced by Clostridium cellulolyticum grown on crystalline cellulose as a sole carbon and energy source was explored by two-dimensional electrophoresis. The cellulolytic system of C. cellulolyticum is composed of at least 30 dockerin-containing proteins (designated cellulosomal proteins) and 30 noncellulosomal components. Most of the known cellulosomal proteins, including CipC, Cel48F, Cel8C, Cel9G, Cel9E, Man5K, Cel9M, and Cel5A, were identified by using two-dimensional Western blot analysis with specific antibodies, whereas Cel5N, Cel9J, and Cel44O were identified by using N-terminal sequencing. Unknown enzymes having carboxymethyl cellulase or xylanase activities were detected by zymogram analysis of two-dimensional gels. Some of these enzymes were identified by N-terminal sequencing as homologs of proteins listed in the NCBI database. Using Trap-Dock PCR and DNA walking, seven genes encoding new dockerin-containing proteins were cloned and sequenced. Some of these genes are clustered. Enzymes encoded by these genes belong to glycoside hydrolase families GH2, GH9, GH10, GH26, GH27, and GH59. Except for members of family GH9, which contains only cellulases, the new modular glycoside hydrolases discovered in this work could be involved in the degradation of different hemicellulosic substrates, such as xylan or galactomannan.

Properties of cellulosomal family 9 cellulases from Clostridium cellulovorans

The cellulosomal family 9 cellulase genes engH, engK, engL, engM, and engY of Clostridium cellulovorans have been cloned and sequenced. We compared the enzyme activity of family 9 cellulosomal cellulases from C. cellulovorans and their derivatives. EngH has the highest activity toward soluble cellulose derivatives such as carboxymethylcellulose (CMC) as well as insoluble cellulose such as acid-swollen cellulose (ASC). EngK has high activity toward insoluble cellulose such as ASC and Avicel. The results of thin-layer chromatography showed that the cleavage products of family 9 cellulases were varied. These results indicated that family 9 endoglucanases possess different modes of attacking substrates and produce varied products. To investigate the functions of the carbohydrate-binding module (CBM) and the catalytic module, truncated derivatives of EngK, EngH, and EngY were constructed and characterized. EngHDeltaCBM and EngYDeltaCBM devoid of the CBM lost activity toward all substrates including CMC. EngKDeltaCBM and EngMDeltaCBM did not lose activity toward CMC but lost activity toward Avicel. These observations suggest that the CBM is extremely important not only because it mediates the binding of the enzyme to the substrates but also because it participates in the catalytic function of the enzyme or contributes to maintaining the correct tertiary structure of the family 9 catalytic module for expressing enzyme activity.

Novel architecture of family-9 glycoside hydrolases identified in cellulosomal enzymes ofAcetivibrio cellulolyticusandClostridium thermocellum

We have sequenced a new gene, cel9B, encoding a family-9 cellulase from a cellulosome-producing bacterium, Acetivibrio cellulolyticus. The gene includes a signal peptide, a family-9 glycoside hydrolases (GH9) catalytic module, two family-3 carbohydrate-binding modules (CBM3c-CBM3b tandem dyad) and a C-terminal dockerin module. An identical modular arrangement exists in two putative GH9 genes from the draft sequence of the Clostridium thermocellum genome. The three homologous CBM3b modules from A. cellulolyticus and C. thermocellum were overexpressed, but, surprisingly, none bound cellulosic substrates. The results raise fundamental questions concerning the possible role(s) of the newly described CBMs. Phylogenetic analysis and preliminary site-directed mutagenesis studies suggest that the catalytic module and the CBM3 dyad are distinctive in their sequences and are proposed to constitute a new GH9 architectural theme.

Structural Basis of Cellulosome Efficiency Explored by Small Angle X-ray Scattering

Cellulose, the main structural component of plant cell walls, is the most abundant carbohydrate polymer in nature. To break down plant cell walls, anaerobic microorganisms have evolved a large extracellular enzyme complex termed cellulosome. This megadalton catalytic machinery organizes an enzymatic assembly, tenaciously bound to a scaffolding protein via specialized intermodular "cohesin-dockerin" interactions that serve to enhance synergistic activity among the different catalytic subunits. Here, we report the solution structure properties of cellulosome-like assemblies analyzed by small angle x-ray scattering and molecular dynamics. The atomic models, generated by our strategy for the free chimeric scaffoldin and for binary and ternary complexes, reveal the existence of various conformations due to intrinsic structural flexibility with no, or only coincidental, inter-cohesin interactions. These results provide primary evidence concerning the mechanisms by which these protein assemblies attain their remarkable synergy. The data suggest that the motional freedom of the scaffoldin allows precise positioning of the complexed enzymes according to the topography of the substrate, whereas short-scale motions permitted by residual flexibility of the enzyme linkers allow "fine-tuning" of individual catalytic domains.