Simultaneous force and fluorescence measurements of a protein that forms a bond between a living bacterium and a solid surface

Molecular determinants of surface colonisation in diarrhoeagenic Escherichia coli (DEC): from bacterial adhesion to biofilm formation

Escherichia coli is primarily known as a commensal colonising the gastrointestinal tract of infants very early in life but some strains being responsible for diarrhoea, which can be especially severe in young children. Intestinal pathogenic E. coli include six pathotypes of diarrhoeagenic E. coli (DEC), namely, the (i) enterotoxigenic E. coli, (ii) enteroaggregative E. coli, (iii) enteropathogenic E. coli, (iv) enterohemorragic E. coli, (v) enteroinvasive E. coli and (vi) diffusely adherent E. coli. Prior to human infection, DEC can be found in natural environments, animal reservoirs, food processing environments and contaminated food matrices. From an ecophysiological point of view, DEC thus deal with very different biotopes and biocoenoses all along the food chain. In this context, this review focuses on the wide range of surface molecular determinants acting as surface colonisation factors (SCFs) in DEC. In the first instance, SCFs can be broadly discriminated into (i) extracellular polysaccharides, (ii) extracellular DNA and (iii) surface proteins. Surface proteins constitute the most diverse group of SCFs broadly discriminated into (i) monomeric SCFs, such as autotransporter (AT) adhesins, inverted ATs, heat-resistant agglutinins or some moonlighting proteins, (ii) oligomeric SCFs, namely, the trimeric ATs and (iii) supramolecular SCFs, including flagella and numerous pili, e.g. the injectisome, type 4 pili, curli chaperone-usher pili or conjugative pili. This review also details the gene regulatory network of these numerous SCFs at the various stages as it occurs from pre-transcriptional to post-translocational levels, which remains to be fully elucidated in many cases.

Improving the reproducibility, accuracy, and stability of an electrochemical biosensor platform for point-of-care use

Electrochemical biosensors possess numerous desirable qualities for target detection, such as portability and ease of use, and are often considered for point-of-care (POC) development. Label-free affinity electrochemical biosensors constructed with semiconductor manufacturing technology (SMT)-produced electrodes and a streptavidin biomediator currently display the highest reproducibility, accuracy, and stability in modern biosensors. However, such biosensors still do not meet POC guidelines regarding these three characteristics. The purpose of this research was to resolve the limitations in reproducibility and accuracy caused by problems with production of the biosensors, with the aim of developing a platform capable of producing devices that exceed POC standards. SMT production settings were optimized and bioreceptor immobilization was improved through the use of a unique linker, producing a biosensor with exceptional reproducibility, impressive accuracy, and high stability. Importantly, the three characteristics of the sensors produced using the proposed platform all meet POC standards set by the Clinical and Laboratory Standards Institute (CLSI). This suggests possible approval of the biosensors for POC development. Furthermore, the detection range of the platform was demonstrated by constructing biosensors capable of detecting common POC targets, including circulating tumor cells (CTCs), DNA/RNA, and curcumin, and the devices were optimized for POC use. Overall, the platform developed in this study shows high potential for production of POC biosensors.

Solid state fluorescence of proteins in high throughput mode and its applications

Direct comparison between fluorescence spectra of a sample in solution and solid state form is valuable to monitor the changes in protein structure when it is “dried” or immobilized on a solid surface (for biocatalysis or sensor applications). We describe here a simple method for recording fluorescence emission spectra of protein powders without using any dedicated accessory for solid samples in a high-throughput format. The 96-well plate used in our studies, was coated black from all the sides and the excitation and emission paths are identical and are from the top of the well. These two features minimize scatter and provide fairly noise free spectra. Even then the fluorescence intensity may be dependent upon many factors such as the extent of protein aggregation, morphology and sizes of the protein particles. Hence, (changes in) λ _max emission may be a more reliable metric in the case of fluorescence spectra of proteins in the solid state. However, any large changes in the intensity could indicate changes in the microenvironment of the fluorophore. The fluorescence emission spectra were blue-shifted (4 to 9 nm), showed an increase in the intensity for different proteins studied upon lyophilization, and were similar to what has been reported by others using available commercial accessories for solid state samples. After validating that our method worked just as well as the dedicated accessories, we applied the method to compare the fluorescence emission spectra of α-chymotrypsin in solution, precipitated form, and the lyophilized powder form. We further examined the fluorescence emission spectra of green fluorescent protein (GFP) in solution and solid form. We also analyzed fluorescence resonance energy transfer (FRET) between tryptophan (Trp57) and the cyclic chromophore of GFP. These findings pointed towards the change in the microenvironment around the cyclic chromophore in GFP upon lyophilization.

Polymers and biopolymers at interfaces

This review updates recent progress in the understanding of the behaviour of polymers at surfaces and interfaces, highlighting examples in the areas of wetting, dewetting, crystallization, and 'smart' materials. Recent developments in analysis tools have yielded a large increase in the study of biological systems, and some of these will also be discussed, focussing on areas where surfaces are important. These areas include molecular binding events and protein adsorption as well as the mapping of the surfaces of cells. Important techniques commonly used for the analysis of surfaces and interfaces are discussed separately to aid the understanding of their application.

Designing novel construction for cell surface display of protein E on Escherichia coli using non-classical pathway based on Lpp-OmpA

Today, transference of recombinant protein on the outer surface of bacteria is deemed as a valuable process for various applications in biotechnology including preparation of vaccines. In this study, Lpp-OmpA structure was used to present outer membrane protein E of Haemophilus influenzae on E. coli outer membrane. Also, a structure was designed according to Lpp-OmpA based on non-classical secretion pathway using bioinformatics software such as MEMSAT-SVM, ScrotumP and SignalP where it lacked any signal peptide at its N-terminal. Potential of this structure in the presentation of protein E on the surface of E. coli through non-classical pathway was indicated by western blotting, SDS page and fluorescent microscopy techniques, similarly its effectiveness was compared with Lpp-OmpA system. The results of the current study showed that the new structure had higher efficiency than Lpp-OmpA, and it could transport protein E on outer membrane well. This study is the first report in the presentation of H. influenzae PE onto the surface of E. coli by Lpp-OmpA, and the structure originated from Lpp-OmpA, according to the non-classical secretion pathway. Our results suggest that non-classical secretion pathway may be exploited as a new secretory pathway on the outer surface of the cell for recombinant proteins.

The role of plasma, albumin, and fibronectin in Staphylococcus epidermidis adhesion to polystyrene surface

The influence of soluble and immobilized plasma, albumin, and fibronectin (Fn) on the adhesion of three Staphylococcus epidermidis strains to polystyrene was investigated. Both soluble and immobilized plasma and albumin cause to 7-fold reduction of the amounts of adhered cells, regardless of the strain used. The soluble Fn exhibited the adhesion for one strain and did not affect the bacterial sorption for remaining strains, whereas on Fn-coated polystyrene two of the three strains showed about 1.5-fold increase in the number of adsorbed bacteria. The plasma- and albumin-coated surfaces became much more hydrophilic as the contact angle changed from 78 ± 2° for control to 18 ± 2° for plasma and 21 ± 3° for albumin. The ligand-receptor specific interactions strains S. epidermidis with Fn-coated surfaces were proved by measuring the adhesion forces between cell surface and Fn-coated AFM tip. The surface roughness measured using AFM after the plasma and proteins immobilization was changed within 10 nm and not correlate with changes in bacterial adhesion.

Characterization of the surfaceome of the metal-reducing bacterium Desulfotomaculum reducens

Desulfotomaculum reducens strain MI-1 is a Gram-positive, sulfate-reducing bacterium also capable of reducing Fe(III). Metal reduction in Gram-positive bacteria is poorly understood. Here, we investigated Fe(III) reduction with lactate, a non-fermentable substrate, as the electron donor. Lactate consumption is concomitant to Fe(III) reduction, but does not support significant growth, suggesting that little energy can be conserved from this process and that it may occur fortuitously. D. reducens can reduce both soluble [Fe(III)-citrate] and insoluble (hydrous ferric oxide, HFO) Fe(III). Because physically inaccessible HFO was not reduced, we concluded that reduction requires direct contact under these experimental conditions. This implies the presence of a surface exposed reductase capable of transferring electrons from the cell to the extracellular electron acceptor. With the goal of characterizing the role of surface proteins in D. reducens and of identifying candidate Fe(III) reductases, we carried out an investigation of the surface proteome (surfaceome) of D. reducens. Cell surface exposed proteins were extracted by trypsin cell shaving or by lysozyme treatment, and analyzed by liquid chromatography-tandem mass spectrometry. This investigation revealed that the surfaceome fulfills many functions, including solute transport, protein export, maturation and hydrolysis, peptidoglycan synthesis and modification, and chemotaxis. Furthermore, a few redox-active proteins were identified. Among these, three are putatively involved in Fe(III) reduction, i.e., a membrane-bound hydrogenase 4Fe-4S cluster subunit (Dred_0462), a heterodisulfide reductase subunit A (Dred_0143) and a protein annotated as alkyl hydroperoxide reductase but likely functioning as a thiol-disulfide oxidoreductase (Dred_1533).

Investigation of microbial biofilm structure by laser scanning microscopy

Microbial bioaggregates and biofilms are hydrated three-dimensional structures of cells and extracellular polymeric substances (EPS). Microbial communities associated with interfaces and the samples thereof may come from natural, technical, and medical habitats. For imaging such complex microbial communities confocal laser scanning microscopy (CLSM) is the method of choice. CLSM allows flexible mounting and noninvasive three-dimensional sectioning of hydrated, living, as well as fixed samples. For this purpose a broad range of objective lenses is available having different working distance and resolution. By means of CLSM the signals detected may originate from reflection, autofluorescence, reporter genes/fluorescence proteins, fluorochromes binding to specific targets, or other probes conjugated with fluorochromes. Recorded datasets can be used not only for visualization but also for semiquantitative analysis. As a result CLSM represents a very useful tool for imaging of microbiological samples in combination with other analytical techniques.

Repetitive dissociation from crocidolite asbestos acts as persistent signal for epidermal growth factor receptor

Mesothelioma is an incurable form of cancer located most commonly in the pleural lining of the lungs and is associated almost exclusively with the inhalation of asbestos. The binding of asbestos to epidermal growth factor receptor (EGFR), a transmembrane signal protein, has been proposed as a trigger for downstream signaling of kinases and expression of genes involved in cell proliferation and inhibition of apoptosis. Here, we investigate the molecular binding of EGFR to crocidolite (blue asbestos; Na2(Fe(2+),Mg)3Fe2(3+)Si8O22(OH)2) in buffer solution. Atomic force microscopy measurements revealed an attractive force of interaction (i.e., bond) as EGFR was pulled from contact with long fibers of crocidolite. The rupture force of this bond increased with loading rate. According to the Bell model, the off-rate of bond dissociation (k(off)) for EGFR was 22 s(-1). Similar experiments with riebeckite crystals, the nonasbestiform variety of crocidolite, yielded a k(off) of 8 s(-1). These k(off) values on crocidolite and riebeckite are very rapid compared to published values for natural agonists of EGFR like transforming growth factor and epidermal growth factor. This suggests binding of EGFR to the surfaces of these minerals could elicit a response that is more potent than biological hormone or cytokine ligands. Signal transduction may cease for endogenous ligands due to endocytosis and subsequent degradation, and even riebeckite particles can be cleared from the lungs due to their short, equant habit. However, the fibrous habit of crocidolite leads to lifelong persistence in the lungs where aberrant, repetitious binding with EGFR may continually trigger the activation switch leading to chronic expression of genes involved in oncogenesis.

Cellular and molecular investigations of the adhesion and mechanics of Listeria monocytogenes lineages' I and II environmental and epidemic strains

Atomic force microscopy (AFM) was used to probe the mechanical and adherence properties of eight Listeria monocytogenes' strains representative of the species' two phylogenetic lineages I and II. From a functional perspective, lineage' I strains were characterized by lower overall adhesion forces and higher specific and nonspecific forces compared to lineage' II strains. From a structural perspective, lineage' II strains were characterized by higher Young's moduli and longer and stiffer biopolymers compared to lineage' I strains. Both lineages' I and II strains were similar in their grafting densities. Finally, our results indicated that epidemic and environmental strains of L. monocytogenes and irrespective of their lineage group were characterized by similar Young's moduli of elasticities and adhesion forces at the cellular level. However, at the molecular level, epidemic strains were characterized by higher specific and nonspecific forces, shorter, denser, and more flexible biopolymers compared to environmental strains.

Characterizing pilus-mediated adhesion of biofilm-forming E. coli to chemically diverse surfaces using atomic force microscopy

Biofilms are complex communities of microorganisms living together at an interface. Because biofilms are often associated with contamination and infection, it is critical to understand how bacterial cells adhere to surfaces in the early stages of biofilm formation. Even harmless commensal Escherichia coli naturally forms biofilms in the human digestive tract by adhering to epithelial cells, a trait that presents major concerns in the case of pathogenic E. coli strains. The laboratory strain E. coli ZK1056 provides an intriguing model system for pathogenic E. coli strains because it forms biofilms robustly on a wide range of surfaces.E. coli ZK1056 cells spontaneously form living biofilms on polylysine-coated AFM cantilevers, allowing us to measure quantitatively by AFM the adhesion between native biofilm cells and substrates of our choice. We use these biofilm-covered cantilevers to probe E. coli ZK1056 adhesion to five substrates with distinct and well-characterized surface chemistries, including fluorinated, amine-terminated, and PEG-like monolayers, as well as unmodified silicon wafer and mica. Notably, after only 0-10 s of contact time, the biofilms adhere strongly to fluorinated and amine-terminated monolayers as well as to mica and weakly to "antifouling" PEG monolayers, despite the wide variation in hydrophobicity and charge of these substrates. In each case the AFM retraction curves display distinct adhesion profiles in terms of both force and distance, highlighting the cells' ability to adapt their adhesive properties to disparate surfaces. Specific inhibition of the pilus protein FimH by a nonhydrolyzable mannose analogue leads to diminished adhesion in all cases, demonstrating the critical role of type I pili in adhesion by this strain to surfaces bearing widely different functional groups. The strong and adaptable binding of FimH to diverse surfaces has unexpected implications for the design of antifouling surfaces and antiadhesion therapies.

Dissociation rate constants of human fibronectin binding to fibronectin-binding proteins on living Staphylococcus aureus isolated from clinical patients

Staphylococcus aureus is part of the indigenous microbiota of humans. Sometimes, S. aureus bacteria enter the bloodstream, where they form infections on implanted cardiovascular devices. A critical, first step in such infections is a bond that forms between fibronectin-binding protein (FnBP) on S. aureus and host proteins, such as fibronectin (Fn), that coat the surface of implants in vivo. In this study, native FnBPs on living S. aureus were shown to form a mechanically strong conformational structure with Fn by atomic force microscopy. The tensile acuity of this bond was probed for 46 bloodstream isolates, each from a patient with a cardiovascular implant. By analyzing the force spectra with the worm-like chain model, we determined that the binding events were consistent with a multivalent, cluster bond consisting of ~10 or ~80 proteins in parallel. The dissociation rate constant (k(off), s(-1)) of each multibond complex was determined by measuring strength as a function of the loading rate, normalized by the number of bonds. The bond lifetime (1/k(off)) was two times longer for bloodstream isolates from patients with an infected device (1.79 or 69.47 s for the 10- or 80-bond clusters, respectively; n = 26 isolates) relative to those from patients with an uninfected device (0.96 or 34.02 s; n = 20 isolates). This distinction could not be explained by different amounts of FnBP, as confirmed by Western blots. Rather, amino acid polymorphisms within the Fn-binding repeats of FnBPA explain, at least partially, the statistically (p < 0.05) longer bond lifetime for isolates associated with an infected cardiovascular device.

Growth of Acinetobacter baumannii in pellicle enhanced the expression of potential virulence factors

Background

Interestingly, Acinetobacter baumannii presents an enhanced capacity to form biofilms (also named pellicles) at the air-liquid interface as compared to the other Acinetobacter species. This characteristic questions the contribution of this phenotype to an increased risk of clinical infections by this pathogen.

Methodology/Principal Findings

By a proteomic approach using 2-D gel electrophoresis-LC-MS/MS mass spectrometry, we compared the membrane protein patterns of A. baumannii 77, a pellicle-forming clinical isolate, grown in planktonic and in sessile modes. We identified 52 proteins with a differential expression, including 32 up-regulated and 20 down-regulated in the pellicle state. Several proteins, differentially expressed during pellicle development, were of particular interest. We determined the over-expression of four siderophore iron uptake systems including the acinetobactin and enterobactin receptors and confirmed that the development of this type of biofilm is promoted by ferric ions. Two over-expressed proteins, CarO and an OprD-homologue, putative carbapenem-resistance associated porins, would be involved in the transport of specific compounds, like ornithine, a biosynthesis precursor of a siderophore from the hydroxamate family. We evidenced the overexpression of a lipase and a transporter of LCFA that may be involved in the recycling of lipids inside the pellicle matrix. Finally, we demonstrated both by proteomic and by AFM studies that this particular type of biofilm required multiple pili systems to maintain this cohesive structure at the air-liquid interface; two of these systems have never been described in A. baumannii.

Conclusions/Significance

Our study demonstrated that several proteins, overexpressed at a late state of pellicle development, could be potentially involved in virulence processes. Therefore, regarding the number of potential virulence factors that are over-expressed in this growth mode, the pellicle-forming clinical isolates should be kept under survey.

Atomic force microscopy to study intermolecular forces and bonds associated with bacteria

Atomic force microscopy (AFM) operates on a very different principle than other forms of microscopy, such as optical microscopy or electron microscopy. The key component of an AFM is a cantilever that bends in response to forces that it experiences as it touches another surface. Forces as small as a few picoNewtons can be detected and probed with AFM. AFM has become very useful in biological sciences because it can be used on living cells that are immersed in water. AFM is particularly useful when the cantilever is modified with chemical groups (e.g. amine or carboxylic groups), small beads (e.g. glass or latex), or even a bacterium. This chapter describes how AFM can be used to measure forces and bonds between a bacterium and another surface. This paper also provides an example of the use of AFM on Staphylococcus aureus, a Gram-positive bacterium that is often associated with biofilms in humans.

A tactile response in Staphylococcus aureus

It is well established that bacteria are able to respond to temporal gradients (e.g., by chemotaxis). However, it is widely held that prokaryotes are too small to sense spatial gradients. This contradicts the common observation that the vast majority of bacteria live on the surface of a solid substrate (e.g., as a biofilm). Herein we report direct experimental evidence that the nonmotile bacterium Staphylococcus aureus possesses a tactile response, or primitive sense of touch, that allows it to respond to spatial gradients. Attached cells recognize their substrate interface and localize adhesins toward that region. Braille-like avidity maps reflect a cell's biochemical sensory response and reveal ultrastructural regions defined by the actual binding activity of specific proteins.

Relating the physical properties of Pseudomonas aeruginosa lipopolysaccharides to virulence by atomic force microscopy

Lipopolysaccharides (LPS) are an important class of macromolecules that are components of the outer membrane of Gram-negative bacteria such as Pseudomonas aeruginosa. P. aeruginosa contains two different sugar chains, the homopolymer common antigen (A band) and the heteropolymer O antigen (B band), which impart serospecificity. The characteristics of LPS are generally assessed after isolation rather than in the context of whole bacteria. Here we used atomic force microscopy (AFM) to probe the physical properties of the LPS of P. aeruginosa strain PA103 (serogroup O11) in situ. This strain contains a mixture of long and very long polymers of O antigen, regulated by two different genes. For this analysis, we studied the wild-type strain and four mutants, ΔWzz1 (producing only very long LPS), ΔWzz2 (producing only long LPS), DΔM (with both the wzz1 and wzz2 genes deleted), and Wzy::GM (producing an LPS core oligosaccharide plus one unit of O antigen). Forces of adhesion between the LPS on these strains and the silicon nitride AFM tip were measured, and the Alexander and de Gennes model of steric repulsion between a flat surface and a polymer brush was used to calculate the LPS layer thickness (which we refer to as length), compressibility, and spacing between the individual molecules. LPS chains were longest for the wild-type strain and ΔWzz1, at 170.6 and 212.4 nm, respectively, and these values were not statistically significantly different from one another. Wzy::GM and DΔM have reduced LPS lengths, at 34.6 and 37.7 nm, respectively. Adhesion forces were not correlated with LPS length, but a relationship between adhesion force and bacterial pathogenicity was found in a mouse acute pneumonia model of infection. The adhesion forces with the AFM probe were lower for strains with LPS mutations, suggesting that the wild-type strain is optimized for maximal adhesion. Our research contributes to further understanding of the role of LPS in the adhesion and virulence of P. aeruginosa.

Bonds between fibronectin and fibronectin-binding proteins on Staphylococcus aureus and Lactococcus lactis

Bacterial cell-wall-associated fibronectin binding proteins A and B (FnBPA and FnBPB) form bonds with host fibronectin. This binding reaction is often the initial step in prosthetic device infections. Atomic force microscopy was used to evaluate binding interactions between a fibronectin-coated probe and laboratory-derived Staphylococcus aureus that are (i) defective in both FnBPA and FnBPB (fnbA fnbB double mutant, DU5883), (ii) capable of expressing only FnBPA (fnbA fnbB double mutant complemented with pFNBA4), or (iii) capable of expressing only FnBPB (fnbA fnbB double mutant complemented with pFNBB4). These experiments were repeated using Lactococcus lactis constructs expressing fnbA and fnbB genes from S. aureus. A distinct force signature was observed for those bacteria that expressed FnBPA or FnBPB. Analysis of this force signature with the biomechanical wormlike chain model suggests that parallel bonds form between fibronectin and FnBPs on a bacterium. The strength and covalence of bonds were evaluated via nonlinear regression of force profiles. Binding events were more frequent (p < 0.01) for S. aureus expressing FnBPA or FnBPB than for the S. aureus double mutant. The binding force, frequency, and profile were similar between the FnBPA and FnBPB expressing strains of S. aureus. The absence of both FnBPs from the surface of S. aureus removed its ability to form a detectable bond with fibronectin. By contrast, ectopic expression of FnBPA or FnBPB on the surface of L. lactis conferred fibronectin binding characteristics similar to those of S. aureus. These measurements demonstrate that fibronectin-binding adhesins FnBPA and FnBPB are necessary and sufficient for the binding of S. aureus to prosthetic devices that are coated with host fibronectin.

Variations in the Nanomechanical Properties of Virulent and Avirulent Listeria monocytogenes

Atomic force microscopy (AFM) was used to quantify both the nanomechanical properties of pathogenic (ATCC 51776 & EGDe) and non-pathogenic (ATCC 15313 & HCC25) Listeria monocytogenes strains and the conformational properties of their surface biopolymers. The nanomechanical properties of the various L. monocytogenes strains were quantified in terms of Young's moduli of cells. To estimate Young's moduli, the classic Hertz model of contact mechanics and a modified version of it that takes into account substrate effects were used to fit the AFM nanoindentation-force measurements collected while pushing onto the bacterial surface biopolymer brush. When compared, the classic Hertz model always predicted higher Young's moduli values of bacterial cell elasticity compared to the modified Hertz model. On average, the modified Hertz model showed that virulent strains are approximately twice as rigid (88.1 ± 14.5 KPa) as the avirulent strains (47.3 ± 7.6 kPa). To quantify the conformational properties of L. monocytogenes' strains surface biopolymers, two models were used. First, the entropic-based, statistical mechanical, random walk formulation, the wormlike chain (WLC) model was used to estimate the elastic properties of the bacterial surface molecules. The WLC model results indicated that the virulent strains are characterized by a more flexible surface biopolymers as indicated by shorter persistence lengths (L(p) = 0.21 ± 0.08 nm) compared to the avirulent strains (L(p) = 0.24 ± 0.14 nm). Second, a steric model developed to describe the repulsive forces measured between the AFM tip and bacterial surface biopolymers indicated that the virulent strains are characterized by crowded and longer biopolymer brushes compared to those of the avirulent strains. Finally, scaling relationships developed for grafted polyelectrolyte brushes indicated L. monocytogenes strains' biopolymer brushes are charged. Collectively, our data indicate that the conformational properties of the bacterial surface biopolymers and their surface densities play an important role in controlling the overall bacterial cell elasticity.

OmpA influences Escherichia coli biofilm formation by repressing cellulose production through the CpxRA two-component system

Previously we discovered that OmpA of Escherichia coli increases biofilm formation on polystyrene surfaces (González Barrios et al., Biotechnol Bioeng, 93:188-200, 2006a). Here we show OmpA influences biofilm formation differently on hydrophobic and hydrophilic surfaces since it represses cellulose production which is hydrophilic. OmpA increased biofilm formation on polystyrene, polypropylene, and polyvinyl surfaces while it decreased biofilm formation on glass surfaces. Sand column assays corroborated that OmpA decreases attachment to hydrophilic surfaces. The ompA mutant formed sticky colonies, and the extracellular polysaccharide that caused stickiness was identified as cellulose. A whole-transcriptome study revealed that OmpA induces the CpxRA two-component signal transduction pathway that responds to membrane stress. CpxA phosphorylates CpxR and results in reduced csgD expression. Reduced CsgD production represses adrA expression and results in reduced cellulose production since CsgD and AdrA are responsible for 3,5-cyclic diguanylic acid and cellulose synthesis. Real-time polymerase chain reaction confirmed csgD and adrA are repressed by OmpA. Biofilm and cellulose assays with double deletion mutants adrA ompA, csgB ompA, and cpxR ompA confirmed OmpA decreased cellulose production and increased biofilm formation on polystyrene surfaces through CpxR and AdrA. Further evidence of the link between OmpA and the CpxRA system was that overproduction of OmpA disrupted the membrane and led to cell lysis. Therefore, OmpA inhibits cellulose production through the CpxRA stress response system, and this reduction in cellulose increases biofilm formation on hydrophobic surfaces.

The Acinetobacter baumannii 19606 OmpA protein plays a role in biofilm formation on abiotic surfaces and in the interaction of this pathogen with eukaryotic cells

The ability of Acinetobacter baumannii to adhere to and persist on surfaces as biofilms could be central to its pathogenicity. The production of pili and a biofilm-associated protein and the expression of antibiotic resistance are needed for robust biofilm formation on abiotic and biotic surfaces. This multistep process also depends on the expression of transcriptional regulatory functions, some of which could sense nutrients available to cells. This report extends previous observations by showing that although outer membrane protein A (OmpA) of A. baumannii 19606 plays a partial role in the development of robust biofilms on plastic, it is essential for bacterial attachment to Candida albicans filaments and A549 human alveolar epithelial cells. In contrast to abiotic surfaces, the interaction with biotic surfaces is independent of the CsuA/BABCDE-mediated pili. The interaction of A. baumannii 19606 with fungal and epithelial cells also results in their apoptotic death, a response that depends on the direct contact of bacteria with these two types of eukaryotic cells. Furthermore, the bacterial adhesion phenotype correlates with the ability of bacteria to invade A549 epithelial cells. Interestingly, the killing activity of cell-free culture supernatants proved to be protease and temperature sensitive, suggesting that its cytotoxic activity is due to secreted proteins, some of which are different from OmpA.

Nanoparticle-mediated nonfluorescent bonding of microspheres to atomic force microscope cantilevers and imaging fluorescence from bonded cantilevers with single molecule sensitivity

A technique to attach silica and glass microspheres onto silicon or silicon nitride cantilevers using silica nanoparticle sol-gel chemistry is presented and a method to image the fluorescence background from the bonded cantilevers with single molecule sensitivity is described. The silica nanoparticles polymerize to form a highly branched network that covalently link the microsphere and cantilever together. The bonding is carried out at room temperature which preserves the integrity of the cantilevers and their reflective coating. Comparison of cantilever and single dye molecule fluorescence demonstrates that the cantilevers are nonfluorescent at the single molecule level.

Towards nanomicrobiology using atomic force microscopy

At the cross-roads of nanoscience and microbiology, the nanoscale analysis of microbial cells using atomic force microscopy (AFM) is an exciting, rapidly evolving research field. Over the past decade, there has been tremendous progress in our use of AFM to observe membrane proteins and live cells at high resolution. Remarkable advances have also been made in applying force spectroscopy to manipulate single membrane proteins, to map surface properties and receptor sites on cells and to measure cellular interactions at the single-cell and single-molecule levels. In addition, recent developments in cantilever nanosensors have opened up new avenues for the label-free detection of microorganisms and bioanalytes.

Force spectroscopy of hepatocytic extracellular matrix components

We present atomic force microscopy and force spectroscopy data of live hepatocytes (HEPG2/C3A liver cell line) grown in Eagle's Minimum Essential Medium, a complex solution of salts and amino acids commonly used for cell culture. Contact-mode imaging and force spectroscopy of this system allowed correlation of cell morphology and extracellular matrix (ECM) properties with substrate properties. Force spectroscopy analysis of cellular "footprints" indicated that the cells secrete large polymers (e.g., 3.5mum contour length and estimated MW 1000kDa) onto their substrate surface. Although definitive identification of the polymers has not yet been achieved, fluorescent-labeled antibody staining has specified the presence of ECM proteins such as collagen and laminin in the cellular footprints. The stretched polymers appear to be much larger than single molecules of known ECM components, such as collagen and heparan sulfate proteoglycan, thus suggesting that the cells create larger entangled, macromolecular structures from smaller components. There is strong evidence which suggests that the composition of the ECM is greatly influenced by the hydrophobicity of the substrate surface, with preferential production and/or adsorption of larger macromolecules on hydrophobic surfaces.

Antibody recognition force microscopy shows that outer membrane cytochromes OmcA and MtrC are expressed on the exterior surface of Shewanella oneidensis MR-1

Antibody recognition force microscopy showed that OmcA and MtrC are expressed on the exterior surface of living Shewanella oneidensis MR-1 cells when Fe(III), including solid-phase hematite (Fe(2)O(3)), was the terminal electron acceptor. OmcA was localized to the interface between the cell and mineral. MtrC displayed a more uniform distribution across the cell surface. Both cytochromes were associated with an extracellular polymeric substance.

Microorganisms, mineral surfaces, and aquatic environments: learning from the past for future progress

The interactions between the geosphere and the biosphere are central questions in environmental and geological research. The relationship between bacteria and their environment is an important example of these interactions. By studying microbial communities in modern environments, it is possible to understand the underlying mechanisms that shape these environments and apply this knowledge to the rock record. Recently, new experimental and theoretical methods, ranging from nano- and biotechnology to mathematical and conceptual modelling, have come into play. Thus, new opportunities for interdisciplinary research in the field of geobiology have emerged. In this paper, we review aspects of state-of-the-art imaging and modelling techniques and propose a research concept linking the experimental and the theoretical approaches.

Thickness and surface density of extracellular polymers on Acidithiobacillus ferrooxidans

In vivo force microscopy measurements of Acidithiobacillus ferrooxidans revealed a repulsive force that was due to the presence of extracellular polymers on the bacterium's surface. Measured force-distance profiles were fit to steric force theory to estimate the density and thickness values of these exopolymers. The polymer densities were 3.4 x 10(16) to 7.1 x 10(16) molecules m(-2), and the equilibrium thickness was 29 nm.

Influence of culture conditions on Escherichia coli O157:H7 biofilm formation by atomic force microscopy

Biofilms are complex microbial communities that are resistant against attacks by bacteriophages and removal by drugs and chemicals. In this study, biofilms of Escherichia coli O157:H7, a bacterial pathogen, were investigated using atomic force microscopy (AFM) in terms of the dynamic transition of morphology and surface properties of bacterial cells over the development of biofilms. The physical and topographical properties of biofilms are different, depending on nutrient availability. Compared to biofilms formed in a high nutrient medium, biofilms form faster and a higher number of bacterial cells were recovered on glass surface in a low nutrient medium. We demonstrate that AFM can obtain high-resolution images and the elastic information about biofilms. As E. coli biofilm becomes mature, the magnitude of the force between a tip and the surface of the biofilm gets stronger, suggesting that extracellular polymeric substances (EPSs), sticky components of biofilms, accumulate over the surface of cells upon the initial attachment of bacterial cells to surfaces.

A molecular Swiss army knife: OmpA structure, function and expression

The OmpA outer membrane protein of Escherichia coli and other enterobacteria is a multifaceted protein. This protein is expressed to very high levels and ompA is tightly regulated at the posttranscriptional level. It can function as an adhesin and invasin, participate in biofilm formation, act as both an immune target and evasin, and serves as a receptor for several bacteriophages. Many of these properties are due to four short protein loops that emanate from the protein to the outside of the cell. Herein it is described how the structure of this protein relates to its many functions.

Specific bonds between an iron oxide surface and outer membrane cytochromes MtrC and OmcA from Shewanella oneidensis MR-1

Shewanella oneidensis MR-1 is purported to express outer membrane cytochromes (e.g., MtrC and OmcA) that transfer electrons directly to Fe(III) in a mineral during anaerobic respiration. A prerequisite for this type of reaction would be the formation of a stable bond between a cytochrome and an iron oxide surface. Atomic force microscopy (AFM) was used to detect whether a specific bond forms between a hematite (Fe(2)O(3)) thin film, created with oxygen plasma-assisted molecular beam epitaxy, and recombinant MtrC or OmcA molecules coupled to gold substrates. Force spectra displayed a unique force signature indicative of a specific bond between each cytochrome and the hematite surface. The strength of the OmcA-hematite bond was approximately twice that of the MtrC-hematite bond, but direct binding to hematite was twice as favorable for MtrC. Reversible folding/unfolding reactions were observed for mechanically denatured MtrC molecules bound to hematite. The force measurements for the hematite-cytochrome pairs were compared to spectra collected for an iron oxide and S. oneidensis under anaerobic conditions. There is a strong correlation between the whole-cell and pure-protein force spectra, suggesting that the unique binding attributes of each cytochrome complement one another and allow both MtrC and OmcA to play a prominent role in the transfer of electrons to Fe(III) in minerals. Finally, by comparing the magnitudes of binding force for the whole-cell versus pure-protein data, we were able to estimate that a single bacterium of S. oneidensis (2 by 0.5 microm) expresses approximately 10(4) cytochromes on its outer surface.

Correlation between fundamental binding forces and clinical prognosis of Staphylococcus aureus infections of medical implants

Atomic force microscopy was used to "fish" for binding reactions between a fibronectin-coated probe (i.e., substrate simulating an implant device) and each of 15 different isolates of Staphylococcus aureus obtained from either patients with an infected cardiac prosthesis (invasive group) or healthy human subjects (control group). There is a strong distinction (p = 0.01) in the binding-force signature observed for the invasive versus control populations. This observation suggests that a microorganism's "force taxonomy" may provide a fundamental and practical indicator of the pathogen-related risk that infections pose to patients with implanted medical devices.

Molecular recognition forces between immunoglobulin G and a surface protein adhesin on living Staphylococcus aureus

We report AFM measurements of binding events between immunoglobulin G (IgG) and protein A (PA) on the surface of live Staphylococcus aureus bacteria. The experiments were carried out with IgG molecules tethered via CM-amylose linkers to thiol SAMs on gold-coated AFM tips. For comparison, a model system consisting of protein A molecules tethered to thiol SAMs on gold-coated silicon substrates was also investigated. Histograms of binding forces for the PA-IgG bond showed comparable rupture forces of 59 and 64 pN for the model system and live bacteria, respectively. We suggest that linker molecules with a length comparable to the AFM tip radius should make it possible to detect specific binding events on the surface of live bacteria with a lateral resolution of a few tens of nanometers. Furthermore, because S. aureus is an important human pathogen, especially methicillin-resistant strains (MRSA), it is possible that additional virulence factors beyond PA can be probed using this technique.

Specific and nonspecific interaction forces between Escherichia coli and silicon nitride, determined by poisson statistical analysis

The nature of the physical interactions between Escherichia coli JM109 and a model surface (silicon nitride) was investigated in water via atomic force microscopy (AFM). AFM force measurements on bacteria can represent the combined effects of van der Waals and electrostatic forces, hydrogen bonding, steric interactions, and perhaps ligand-receptor type bonds. It can be difficult to decouple these forces into their individual components since both specific (chemical or short-range forces such as hydrogen bonding) and nonspecific (long-range colloidal) forces may be present in the overall profiles. An analysis is presented based on the application of Poisson statistics to AFM adhesion data, to decouple the specific and nonspecific interactions. Comparisons with classical DLVO theory and a modified form of a van der Waals expression for rough surfaces were made in order to help explain the nature of the interactions. The only specific forces in the system were due to hydrogen bonding, which from the Poisson analysis were found to be -0.125 nN. The nonspecific forces of 0.155 nN represent an overall repulsive interaction. These nonspecific forces are comparable to the forces calculated from DLVO theory, in which electrostatic-double layer interactions are added to van der Waals attractions calculated at the distance of closest approach, as long as the van der Waals model for "rough" spherical surfaces is used. Calculated electrostatic-double layer and van der Waals interactions summed to 0.116 nN. In contrast, if the classic (i.e., smooth) sphere-sphere model was used to predict the van der Waals forces, the sum of electrostatic and van der Waals forces was -7.11 nN, which appears to be a large overprediction. The Poisson statistical analysis of adhesion forces may be very useful in applications of bacterial adhesion, because it represents an easy way to determine the magnitude of hydrogen bonding in a given system and it allows the fundamental forces to be easily broken into their components.

Interaction forces measured using AFM between colloids and surfaces coated with both dextran and protein

Both proteins and polysaccharides are biopolymers present on a bacterial surface that can simultaneously affect bacterial adhesion. To better understand how the combined presence of proteins and polysaccharides might influence bacterial attachment, adhesion forces were examined using atomic force microscopy (AFM) between colloids (COOH- or protein-coated) and polymer-coated surfaces (BSA, lysozyme, dextran, BSA+dextran and lysozyme+dextran) as a function of residence time and ionic strength. Protein and dextran were competitively covalently bonded onto glass surfaces, forming a coating that was 22-33% protein and 68-77% dextran. Topographic and phase images of polymer-coated surfaces obtained with tapping mode AFM indicated that proteins at short residence times (<1 s) were shielded by dextran. Adhesion forces measured between colloid and polymer-coated surfaces at short residence times increased in the order protein+dextran < or = protein < dextran. However, the adhesion forces for protein+dextran-coated surface substantially increased with longer residence times, producing the largest adhesion forces between polymer coated surfaces and the colloid over the longest residence times (50-100 s). It was speculated that with longer interaction times the proteins extended out from beneath the dextran and interacted with the colloid, leading to a molecular rearrangement that increased the overall adhesion force. These results show the importance of examining the effect of the combined adhesion force with two different types of biopolymers present and how the time of interaction affects the magnitude of the force obtained with two-polymer-coated surfaces.

Adhesion forces between functionalized latex microspheres and protein-coated surfaces evaluated using colloid probe atomic force microscopy

Proteins are important in bacterial adhesion, but interactions at molecular-scales between proteins and specific functional groups are not well understood. The adhesion forces between four proteins [bovine serum albumin (BSA), protein A, lysozyme, and poly-d-lysine] and COOH, NH2 and OH-functionalized (latex) colloids were examined using colloid probe atomic force microscopy (AFM) as the function of colloid residence time (T) and solution ionic strength (IS). For three of the proteins, OH-functionalized colloids produced higher adhesion forces to proteins (2.6-30.5 nN; IS=1 mM, T=10s) than COOH- and NH2-functionalized colloids (1.6-6.8 nN). However, protein A produced the largest adhesion force (8.1+/-1.0 nN, T=10 s) with the COOH-functionalized colloid, demonstrating the importance of specific and unanticipated protein-functional group interactions. The NH2-functionalized colloid typically produced the lowest adhesion forces with all proteins, likely due to repulsive electrostatic forces and weak bonds for NH2-NH2 interactions. The adhesion force (F) between functionalized colloids and proteins consistently increased with residence time (T), and data was well fitted by F=ATn. The constant value of n=0.21+/-0.07 for all combinations of proteins and functionalized colloids indicated that water exclusion and protein rearrangement were the primary factors affecting adhesion over time. Adhesion forces decreased inversely with IS for all functional groups interacting with surface proteins, consistent with previous findings. These results demonstrate the importance of specific molecular-scale interactions between functional groups and proteins that will help us to better understand factors colloidal adhesion to surfaces.

Nanoscale characterization and determination of adhesion forces of Pseudomonas aeruginosa pili by using atomic force microscopy

Type IV pili play an important role in bacterial adhesion, motility, and biofilm formation. Here we present high-resolution atomic force microscopy (AFM) images of type IV pili from Pseudomonas aeruginosa bacteria. An individual pilus ranges in length from 0.5 to 7 microm and has a diameter from 4 to 6 nm, although often, pili bundles in which the individual filaments differed in both length and diameter were seen. By attaching bacteria to AFM tips, it was possible to fasten the bacteria to mica surfaces by pili tethers. Force spectra of tethered pili gave rupture forces of 95 pN. The slopes of force curves close to the rupture force were nearly linear but showed little variation with pilus length. Furthermore, force curves could not be fitted with wormlike-chain polymer stretch models when using realistic persistence lengths for pili. The observation that the slopes near rupture did not depend on the pili length suggests that they do not represent elastic properties of the pili. It is possible that this region of the force curves is determined by an elastic element that is part of the bacterial wall, although further experiments are needed to confirm this.

Hha, YbaJ, and OmpA regulate Escherichia coli K12 biofilm formation and conjugation plasmids abolish motility

Escherichia coli Hha is an environmental-response regulator of the pathogenic hemolysin operon, and Hha and the contiguous YbaJ are both induced 30-fold in E. coli biofilms (Appl. Microbiol. Biotechnol. 64:515, 2004). Here it is shown that Hha and YbaJ regulate biofilm formation since the hha/ybaJ deletion reduces biofilm mass in microtitre plates (81% in minimal medium, 50% in complex medium) and in flow cells (1,000-fold less surface coverage in minimal medium). The addition of the derepressed conjugative plasmid R1drd19, which increases significantly biofilm formation, eliminated motility completely in wild-type E. coli K12, promoted cell aggregation 27.18 +/- 0.05-fold, and produced a flatter biofilm. Deletion of hha/ybaJ or ybaJ restored motility (this motility phenotype may be complemented by providing hha(+)/ybaJ(+) or ybaJ(+) in trans) and reduced cell aggregation to that of the wild-type strain that lacks the conjugation plasmid. This increase in motility due to deleting hha/ybaJ was found to be due to 8-fold induction of fliA transcription. In addition, deletion of ompA reduced biofilm mass by 80% in both LB medium and LB medium with glucose. Also, Hha/YbaJ promotes conjugation since there was five-fold less conjugation in the hha/ybaJ mutant. It appears that conjugation plasmids promote biofilm formation by promoting cell aggregation, and that Hha and YbaJ increase biofilm formation by increasing conjugation and by decreasing motility when a conjugative plasmid (R1drd19) is present (YbaJ plays the most important role in this regulation of motility). When hha/ybaJ are deleted, there is less conjugation, less aggregation, more motility, and less biofilm.