Improved identification of yeast species directly from positive blood culture media by combining Sepsityper specimen processing and Microflex analysis with the matrix-assisted laser desorption ionization Biotyper system

Evaluation of the Limit of Detection of Bacteria by Tandem Mass Spectrometry Proteotyping and Phylopeptidomics

Shotgun proteomics has proven to be an attractive alternative for identifying a pathogen and characterizing the antimicrobial resistance genes it produces. Because of its performance, proteotyping of microorganisms by tandem mass spectrometry is expected to become an essential tool in modern healthcare. Proteotyping microorganisms that have been isolated from the environment by culturomics is also a cornerstone for the development of new biotechnological applications. Phylopeptidomics is a new strategy that estimates the phylogenetic distances between the organisms present in the sample and calculates the ratio of their shared peptides, thus improving the quantification of their contributions to the biomass. Here, we established the limit of detection of tandem mass spectrometry proteotyping based on MS/MS data recorded for several bacteria. The limit of detection for Salmonella bongori with our experimental set-up is 4 × 10⁴ colony-forming units from a sample volume of 1 mL. This limit of detection is directly related to the amount of protein per cell and therefore depends on the shape and size of the microorganism. We have demonstrated that identification of bacteria by phylopeptidomics is independent of their growth stage and that the limit of detection of the method is not degraded in presence of additional bacteria in the same proportion.

Candidiasis profile at the outpatient department of the university of cape coast hospital in the central region of Ghana: a retrospective study

INTRODUCTION

Vulvovaginal candidiasis (VVC) is a public health problem with an estimated 138 million women globally experiencing recurrent VVC annually. The microscopic diagnosis of VVC has low sensitivity, but it remains an essential tool for diagnosis as the microbiological culture methods are limited to advanced clinical microbiology laboratories in developing countries. The study retrospectively analyzed the presence of red blood cells (RBCs), epithelial cells (ECs), pus cells (PCs) and Candida albicans positive in wet mount preparation of urine or high vaginal swabs (HVS) samples to test for their sensitivity and specificity for the diagnosis of candidiasis.

METHODS

The study is a retrospective analysis at the Outpatient Department of the University of Cape Coast between 2013 and 2020. All urine and high vagina swabs (HVS) cultures samples using Sabourauds dextrose agar with wet mount data were analyzed. 2 × 2 contingency diagnostic test was used to ascertain the diagnostic accuracy of red blood cells (RBCs), epithelial cells (ECs), pus cells (PCs), and Candida albicans positive in wet mount preparation of urine or high vaginal swabs (HVS) samples for the diagnosis of candidiasis. The association of candidiasis among patients' demographics was analyzed using relative risk (RR) analysis.

RESULTS

The high prevalence of candida infection was among female subjects 97.1% (831/856) compared to males 2.9% (25/856). The microscopic profiles which characterized candida infection were pus cells 96.4% (825/856), epithelial cells 98.7% (845/856), red blood cells (RBCs) 7.6% (65/856) and Candida albicans positive 63.2% (541/856). There was a lower risk of Candida infections among male patients compared to female patients RR (95% CI) = 0.061 (0.041-0.088). The sensitivity (95%) for detecting Candida albicans positive and red blood cells (0.62 (0.59-0.65)), Candida albicans positive and pus cells (0.75 (0.72-0.78)) and Candida albicans positive and epithelial cells (0.95 (0.92-0.96)) with corresponding specificity (95% CI) of 0.63 (0.60-0.67), 0.69 (0.66-0.72) and 0.74 (0.71-0.76) were detected among the high vaginal swab samples.

CONCLUSION

In conclusion, the study has shown that the presence of PCs, ECs, RBCs or ratio of RBCs/ECs and RBCs/PCs in the wet mount preparation from urine or HVS can enhance microscopic diagnosis of VVC cases.

FcMBL magnetic bead-based MALDI-TOF MS rapidly identifies paediatric blood stream infections from positive blood cultures

Rapid identification of potentially life-threatening blood stream infections (BSI) improves clinical outcomes, yet conventional blood culture (BC) identification methods require ~24-72 hours of liquid culture, plus 24-48 hours to generate single colonies on solid media suitable for identification by mass spectrometry (MS). Newer rapid centrifugation techniques, such as the Bruker MBT-Sepsityper® IVD, replace culturing on solid media and expedite the diagnosis of BCs but frequently demonstrate reduced sensitivity for identifying clinically significant Gram-positive bacterial or fungal infections. This study introduces a protocol that utilises the broad-range binding properties of an engineered version of mannose-binding lectin linked to the Fc portion of immunoglobulin (FcMBL) to capture and enrich pathogens combined with matrix-assisted laser desorption-ionisation time-of-flight (MALDI-TOF) MS for enhanced infection identification in BCs. The FcMBL method identified 94.1% (64 of 68) of clinical BCs processed, with a high sensitivity for both Gram-negative and Gram-positive bacteria (94.7 and 93.2%, respectively). The FcMBL method identified more patient positive BCs than the Sepsityper® (25 of 25 vs 17 of 25), notably with 100% (3/3) sensitivity for clinical candidemia, compared to only 33% (1/3) for the Sepsityper®. Additionally, during inoculation experiments, the FcMBL method demonstrated a greater sensitivity, identifying 100% (24/24) of candida to genus level and 9/24 (37.5%) top species level compared to 70.8% (17/24) to genus and 6/24 to species (25%) using the Sepsityper®. This study demonstrates that capture and enrichment of samples using magnetic FcMBL-conjugated beads is superior to rapid centrifugation methods for identification of BCs by MALDI-TOF MS. Deploying the FcMBL method therefore offers potential clinical benefits in sensitivity and reduced turnaround times for BC diagnosis compared to the standard Sepsityper® kit, especially for fungal diagnosis.

Mass spectrometry in research laboratories and clinical diagnostic: a new era in medical mycology

Diagnosis by clinical mycology laboratory plays a critical role in patient care by providing definitive knowledge of the cause of infection and antimicrobial susceptibility data to physicians. Rapid diagnostic methods are likely to improve patient. Aggressive resuscitation bundles, adequate source control, and appropriate antibiotic therapy are cornerstones for success in the treatment of patients. Routine methods for identifying clinical specimen fungal pathogen are based on the cultivation on different media with the subsequent examination of its phenotypic characteristics comprising a combination of microscopic and colony morphologies. As some fungi cannot be readily identified using these methods, molecular diagnostic methods may be required. These methods are fast, but it can cost a lot. Matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) is suitable for high-throughput and rapid diagnostics at low costs. It can be considered an alternative for conventional biochemical and molecular identification systems in a microbiological laboratory. The reliability and accuracy of this method have been scrutinized in many surveys and have been compared with several methods including sequencing and molecular methods. According to these findings, the reliability and accuracy of this method are very high and can be trusted. With all the benefits of this technique, the libraries of MALDI-TOF MS need to be strengthened to enhance its performance. This review provides an overview of the most recent research literature that has investigated the applications and usage of MT-MS to the identification of microorganisms, mycotoxins, antifungal susceptibility examination, and mycobiome research.

COVID-19 associated mucormycosis: evolving technologies for early and rapid diagnosis

The post-coronavirus disease (COVID-19) mucormycosis is a deadly addition to the pandemic spectrum. Although it’s a rare, aggressive, and opportunistic disease, the associated morbidity and mortality are significant. The complex interplay of factors aggravating CAM is uncontrolled diabetes, irrational and excessive use of antibiotics, steroids, and an impaired immune system. Recently, India has been witnessing a rapid surge in the cases of coronavirus disease-associated mucormycosis (CAM), since the second wave of COVID-19. The devastating and lethal implications of CAM had now become a matter of global attention. A delayed diagnosis is often associated with a poor prognosis. Therefore, the rapid and early diagnosis of infection would be life-saving. Prevention and effective management of mucormycosis depend upon its early and accurate diagnosis followed by a multimodal therapeutic approach. The current review summarizes an array of detection methods and highlights certain evolving technologies for early and rapid diagnosis of CAM. Furthermore, several potential management strategies have also been discussed, which would aid in tackling the neglected yet fatal crisis of mucormycosis associated with COVID-19.

Recognition of Diagnostic Gaps for Laboratory Diagnosis of Fungal Diseases: Expert Opinion from the Fungal Diagnostics Laboratories Consortium (FDLC)

Fungal infections are a rising threat to our immunocompromised patient population, as well as other nonimmunocompromised patients with various medical conditions. However, little progress has been made in the past decade to improve fungal diagnostics. To jointly address this diagnostic challenge, the Fungal Diagnostics Laboratory Consortium (FDLC) was recently created. The FDLC consists of 26 laboratories from the United States and Canada that routinely provide fungal diagnostic services for patient care. A survey of fungal diagnostic capacity among the 26 members of the FDLC was recently completed, identifying the following diagnostic gaps: lack of molecular detection of mucormycosis; lack of an optimal diagnostic algorithm incorporating fungal biomarkers and molecular tools for early and accurate diagnosis of Pneumocystis pneumonia, aspergillosis, candidemia, and endemic mycoses; lack of a standardized molecular approach to identify fungal pathogens directly in formalin-fixed paraffin-embedded tissues; lack of robust databases to enhance mold identification with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry; suboptimal diagnostic approaches for mold blood cultures, tissue culture processing for Mucorales, and fungal respiratory cultures for cystic fibrosis patients; inadequate capacity for fungal point-of-care testing to detect and identify new, emerging or underrecognized, rare, or uncommon fungal pathogens; and performance of antifungal susceptibility testing. In this commentary, the FDLC delineates the most pressing unmet diagnostic needs and provides expert opinion on how to fulfill them. Most importantly, the FDLC provides a robust laboratory network to tackle these diagnostic gaps and ultimately to improve and enhance the clinical laboratory's capability to rapidly and accurately diagnose fungal infections.

Application of single-cell real-time imaging flow cytometry in rapid detection of pathogenic fungi in clinical liquid specimens

Rapid and direct observation of fungal spores or hyphae in clinical liquid specimens poses a challenge for the diagnosis of invasive fungal infection. To allow rapid detection of fungal pathogens, we designed a new method of fungal cell detection involving double fluorescence staining with calcium fluorescent white (CFW) and SYTOX green combined with single-cell real-time imaging flow cytometry (IFC). IFC allowed quick detection and analysis of detailed morphology of the spores and pseudohyphae of Candida albicans, and small hyphae and typical truncated large mycelia of Aspergillus fumigatus. Further, cell sorting based on fluorescence, the width-to-height ratio and bright-field parameters preferentially identified spores or hyphae with a typical cell wall. The specificity and overall coincidence rate of IFC for fungi detection in common clinical samples were 100% and 98.18%, respectively. Moreover, the detection rate by IFC (102/105, 97.14%) was significantly higher (P = 0.002) than that by wet mount method (89/105, 84.5%). Therefore, IFC is a reliable diagnostic method with a high potential for application for rapid diagnosis of fungal infection in the clinic.

Identification of microorganisms directly from blood culture bottles with polymicrobial growth: comparison of FilmArray and direct MALDI-TOF MS

Bloodstream infections (BSIs) are related to high mortality and morbidity. Rapid administration of effective antimicrobial treatment is crucial for patient survival. Recently developed rapid methods to identify pathogens directly from blood culture bottles speed up diagnosis of BSIs. The present study compares the performance of two rapid identification methods, FilmArray and direct MALDI-TOF MS, on identifying microorganisms directly from positive blood culture bottles with polymicrobial growth. FilmArray and direct MALDI-TOF MS were performed directly on positive clinical and simulated polymicrobial blood culture bottles. Assay results were compared with standard culture methods. In total, 110 polymicrobial blood culture samples, of which 96 samples contained two microorganisms while 14 samples contained three microorganisms, were studied. FilmArray was able to identify 215/234 (92.0%) of isolates detected by the standard culture method and successfully identified all microorganisms in 88/110 (80.0%) of blood culture bottles. In contrast, direct MALDI-TOF MS was only able to identify 65/234 (27.8%) of isolates and managed to identify all microoganisms in 2/110 (2.1%) of blood culture bottles. FilmArray is a rapid method for direct identification of polymicrobial blood culture samples that can complement the conventional identification methods. Direct MALDI-TOF MS has low performance with polymicrobial samples.

Johnson E, Littlechild J, Winlove CP, Vollmer F, Gow NAR. Biosensors and Diagnostics for Fungal Detection

Early detection is critical to the successful treatment of life-threatening infections caused by fungal pathogens, as late diagnosis of systemic infection almost always equates with a poor prognosis. The field of fungal diagnostics has some tests that are relatively simple, rapid to perform and are potentially suitable at the point of care. However, there are also more complex high-technology methodologies that offer new opportunities regarding the scale and precision of fungal diagnosis, but may be more limited in their portability and affordability. Future developments in this field are increasingly incorporating new technologies provided by the use of new format biosensors. This overview provides a critical review of current fungal diagnostics and the development of new biophysical technologies that are being applied for selective new sensitive fungal biosensors to augment traditional diagnostic methodologies.

Identification and broth-microdilution antifungal susceptibility testing of yeast directly from automated blood cultures

Aim: To standardize MALDI-TOF-MS based identification and antifungal susceptibility (AFST) for yeasts directly from automated blood cultures to reduce turnaround time. Materials & methods: Direct-ID after lysis-centrifugation (0.5% SDS) standardized in 40 and validated in 250 yeast positive samples. Direct-AFST was standardized with fluconazole (28 samples) and evaluated (70 samples) for seven antifungals. Results: Direct-ID had a high sensitivity (97.2%) and specificity (94.3%). Correct species-level identification showed 100% in C. tropicalis, C. krusei, C. parapsilosis. Direct-AFST had a 100% categorical agreement with culture-AFST for posaconazole, anidulafungin and >90% categorical agreement for amphotericin B, voriconazole and fluconazole. Conclusion: Direct-ID and subsequent direct-AFST is a rapid and robust method to reduce the turnaround time for the diagnosis of invasive candidiasis.

Review of the impact of MALDI-TOF MS in public health and hospital hygiene, 2018

Introduction

MALDI-TOF MS represents a new technological era for microbiology laboratories. Improved sample processing and expanded databases have facilitated rapid and direct identification of microorganisms from some clinical samples. Automated analysis of protein spectra from different microbial populations is emerging as a potential tool for epidemiological studies and is expected to impact public health.

Aim

To demonstrate how implementation of MALDI-TOF MS has changed the way microorganisms are identified, how its applications keep increasing and its impact on public health and hospital hygiene.

Methods

A review of the available literature in PubMED, published between 2009 and 2018, was carried out.

Results

Of 9,709 articles retrieved, 108 were included in the review. They show that rapid identification of a growing number of microorganisms using MALDI-TOF MS has allowed for optimisation of patient management through prompt initiation of directed antimicrobial treatment. The diagnosis of Gram-negative bacteraemia directly from blood culture pellets has positively impacted antibiotic streamlining, length of hospital stay and costs per patient. The flexibility of MALDI-TOF MS has encouraged new forms of use, such as detecting antibiotic resistance mechanisms (e.g. carbapenemases), which provides valuable information in a reduced turnaround time. MALDI-TOF MS has also been successfully applied to bacterial typing.

Conclusions

MALDI-TOF MS is a powerful method for protein analysis. The increase in speed of pathogen detection enables improvement of antimicrobial therapy, infection prevention and control measures leading to positive impact on public health. For antibiotic susceptibility testing and bacterial typing, it represents a rapid alternative to time-consuming conventional techniques.

Rapid direct identification of positive paediatric blood cultures by MALDI-TOF MS technology and its clinical impact in the paediatric hospital setting

OBJECTIVE

Rapid diagnostic tools are imperative for timely clinical decision making, particularly in bacteraemic patients. This study evaluated the performance of a fast, inexpensive novel in house method for processing positive blood cultures for immediate identification of microorganisms by matrix-assisted laser desorption ionization-time of flight mass spectrometry (Vitek MS bioMérieux). We prospectively analyzed the clinical impact of such method on the management of pediatric patients.

RESULT

In total, 360 positive blood cultures were included. Among 318 mono-microbial cultures, in-house method achieved correct identification in 270 (85%) cultures to the species level, whilst 43 (13.5%) gave no identification, and 7 (2.2%) gave discordant identifications. Identification of Gram-negative organisms was accurate to both species and genus level in 99% of isolates, and for Gram positives accuracy was 84% to genus and 81% to species level overall, with accuracy of 100% for Staphylococcus aureus and Enterococcus to the species level. Assessment of the potential impact of direct identification in sixty sequential cases revealed a clear clinical benefit in 35.5% of cases. Benefits included timely antibiotic rationalization, change of medical intervention, and early confirmation of contamination. This study demonstrates a highly accurate in-house method with considerable potential clinical benefits for paediatric care.

Matrix-Assisted Laser Desorption/Ionization Time-of-Flight: The Revolution in Progress

This article summarizes recent advances in the application of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) to new areas of infectious diseases diagnostics. We discuss progress toward routine identification of mycobacteria and filamentous fungi and direct identification of pathogens from clinical specimens. Of greatest interest is the use of MALDI-TOF MS for identifying organisms from positive blood cultures and from clinical specimens such as urine. Last, We highlight some exciting new possibilities for MALDI-TOF MS phenotypic susceptibility testing for bacteria and yeast.

Matrix-Assisted Laser Desorption Time of Flight Mass Spectrometry

Matrix-assisted laser desorption time of flight mass spectrometry (MALDI-TOF MS), adapted for use in clinical microbiology laboratories, challenges current standards of microbial detection and identification. This article summarizes the capabilities of MALDI-TOF MS in diagnostic clinical microbiology laboratories and describes the underpinnings of the technology, highlighting topics such as sample preparation, spectral analysis, and accuracy. The use of MALDI-TOF MS in the clinical microbiology laboratory is growing, and, when properly deployed, can accelerate diagnosis and improve patient care.

Impacts and Challenges of Advanced Diagnostic Assays for Transplant Infectious Diseases

The advanced technologies described in this chapter should allow for full inventories to be made of bacterial genes, their time- and place-dependent expression, and the resulting proteins as well as their outcome metabolites. The evolution of these molecular technologies will continue, not only in the microbial pathogens but also in the context of host-pathogen interactions targeting human genomics and transcriptomics. Their performance characteristics and limitations must be clearly understood by both laboratory personnel and clinicians to ensure proper utilization and interpretation.

Matrix-Assisted Laser Desorption Ionization-Time of Flight Mass Spectrometry for the Rapid Detection of Antimicrobial Resistance Mechanisms and Beyond

Matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) has been successfully applied in recent years for first-line identification of pathogens in clinical microbiology because it is simple to use, rapid, and accurate and has economic benefits in hospital management. The range of clinical applications of MALDI-TOF MS for bacterial isolates is increasing constantly, from species identification to the two most promising applications in the near future: detection of antimicrobial resistance and strain typing for epidemiological studies. The aim of this review is to outline the contribution of previous MALDI-TOF MS studies in relation to detection of antimicrobial resistance and to discuss potential future challenges in this field. Three main approaches are ready (or almost ready) for clinical use, including the detection of antibiotic modifications due to the enzymatic activity of bacteria, the detection of antimicrobial resistance by analysis of the peak patterns of bacteria or mass peak profiles, and the detection of resistance by semiquantification of bacterial growth in the presence of a given antibiotic. This review provides an expert guide for MALDI-TOF MS users to new approaches in the field of antimicrobial resistance detection, especially possible applications as a routine diagnostic tool in microbiology laboratories.

MALDI-TOF MS Applications to the Detection of Antifungal Resistance: State of the Art and Future Perspectives

MALDI-TOF MS technology has made possible revolutionary advances in the diagnosis of infectious diseases. Besides allowing rapid and reliable identification of bacteria and fungi, this technology has been recently applied to the detection of antimicrobial resistance. Several approaches have been proposed and evaluated for application of MALDI-TOF MS to antimicrobial susceptibility testing of bacteria, and some of these have been or might be applied also to yeasts. In this context, the comparison of proteomic profiles of bacteria/yeasts incubated with or without antimicrobial drugs is a very promising method. Another recently proposed MALDI-TOF MS-based approach for antifungal susceptibility testing is the application of the semi-quantitative MALDI Biotyper antibiotic susceptibility test rapid assay, which was originally designed for antimicrobial susceptibility testing of bacteria, to yeast isolates. Increasingly effective and accurate MS tools and instruments as well as the possibility to optimize analytical parameter settings for targeted applications have generated an expanding area in the field of clinical microbiology diagnostics, paving the way for the development and/or optimization of rapid methods for antifungal susceptibility testing in the near future. In the present study, the state of the art of MALDI-TOF MS applications to antifungal susceptibility testing is reviewed, and cutting-edge developments are discussed, with a particular focus on methods allowing rapid detection of drug resistance in pathogenic fungi causing systemic mycoses.

A Rapid Procedure for Identification and Antifungal Susceptibility Testing of Yeasts From Positive Blood Cultures

The development of rapid diagnostic assays for the identification and analysis of antimicrobial resistance of fungal pathogens causing invasive mycoses is of utmost importance to reduce morbidity and mortality. We evaluated the performance of a novel rapid procedure directly applied to monomicrobial blood cultures from patients with bloodstream infection caused by yeast species, including nine Candida and three non-Candida species. For the rapid procedure herein developed, samples of positive blood cultures were transferred into serum separator tubes and treated with sodium dodecyl sulfate; the yeast layer was recovered and directly used for microbial identification by MALDI-TOF mass spectrometry and antifungal susceptibility testing (AFST) by the Sensititre YeastOne Y010 panel. The results were compared with those obtained by the same methods applied to colonies isolated on solid media. Using a score value of 1.700 as cut-off for valid identification, the rapid procedure identified 66 of 124 (53.2%) isolates, all of which concordantly with the reference method. However, adopting a cut-off ≥1.300 and ≥4 consecutive repetitions of the same species in the list of matches would extend concordant identification to 107/124 (86.3%) samples. Importantly, AFST revealed essential agreement between the two methods for all the isolate/antifungal drug combinations tested, including misidentified and not identified isolates. Therefore, the procedure herein developed represents a valid alternative for AFST of yeasts from positive blood cultures, yielding accurate and reliable results at least 24 h earlier than with the routine procedure, thus allowing clinicians to promptly streamline antifungal therapy.

Recent Advances and Ongoing Challenges in the Diagnosis of Microbial Infections by MALDI-TOF Mass Spectrometry

Timeliness and accuracy in the diagnosis of microbial infections are associated with decreased mortality and reduced length of hospitalization, especially for severe, life-threatening infections. A rapid diagnosis also allows for early streamlining of empirical antimicrobial therapies, thus contributing to limit the emergence and spread of antimicrobial resistance. The introduction of matrix-assisted laser desorption/ionization-time of flight (MALDI-TOF) mass spectrometry (MS) for routine identification of microbial pathogens has profoundly influenced microbiological diagnostics, and is progressively replacing biochemical identification methods. Compared to currently used identification methods, MALDI-TOF MS has the advantage of identifying bacteria and yeasts directly from colonies grown on culture plates for primary isolation in a few minutes and with considerable material and labor savings. The reliability and accuracy of MALDI-TOF MS in identification of clinically relevant bacteria and yeasts has been demonstrated by several studies showing that the performance of MALDI-TOF MS is comparable or superior to phenotypic methods currently in use in clinical microbiology laboratories, and can be further improved by database updates and analysis software upgrades. Besides microbial identification from isolated colonies, new perspectives are being explored for MALDI-TOF MS, such as identification of pathogens directly from positive blood cultures, sub-species typing, and detection of drug resistance determinants. In this review, we summarize the state of the art in routine identification of microbial pathogens by MALDI-TOF MS, and highlight recent advancements of this technology in special applications, such as strain typing, assessment of drug susceptibility, and detection of virulence factors.

An Automated Sample Preparation Instrument to Accelerate Positive Blood Cultures Microbial Identification by MALDI-TOF Mass Spectrometry (Vitek®MS)

Sepsis is the leading cause of death among patients in intensive care units (ICUs) requiring an early diagnosis to introduce efficient therapeutic intervention. Rapid identification (ID) of a causative pathogen is key to guide directed antimicrobial selection and was recently shown to reduce hospitalization length in ICUs. Direct processing of positive blood cultures by MALDI-TOF MS technology is one of the several currently available tools used to generate rapid microbial ID. However, all recently published protocols are still manual and time consuming, requiring dedicated technician availability and specific strategies for batch processing. We present here a new prototype instrument for automated preparation of Vitek^®MS slides directly from positive blood culture broth based on an “all-in-one” extraction strip. This bench top instrument was evaluated on 111 and 22 organisms processed using artificially inoculated blood culture bottles in the BacT/ALERT^® 3D (SA/SN blood culture bottles) or the BacT/ALERT Virtuo^TM system (FA/FN Plus bottles), respectively. Overall, this new preparation station provided reliable and accurate Vitek MS species-level identification of 87% (Gram-negative bacteria = 85%, Gram-positive bacteria = 88%, and yeast = 100%) when used with BacT/ALERT^® 3D and of 84% (Gram-negative bacteria = 86%, Gram-positive bacteria = 86%, and yeast = 75%) with Virtuo^® instruments, respectively. The prototype was then evaluated in a clinical microbiology laboratory on 102 clinical blood culture bottles and compared to routine laboratory ID procedures. Overall, the correlation of ID on monomicrobial bottles was 83% (Gram-negative bacteria = 89%, Gram-positive bacteria = 79%, and yeast = 78%), demonstrating roughly equivalent performance between manual and automatized extraction methods. This prototype instrument exhibited a high level of performance regardless of bottle type or BacT/ALERT system. Furthermore, blood culture workflow could potentially be improved by converting direct ID of positive blood cultures from a batch-based to real-time and “on-demand” process.

Profile of GenMark's ePlex® blood culture identification fungal pathogen panel

INTRODUCTION

Fungemia presents high morbi-mortality and thus rapid microbiological diagnosis may contribute to appropriate patient management. In the last decade, kits based on molecular technologies have become available and health care institutes are increasingly facing critical investment choices. Although all these tools aim to achieve rapid fungal detection and species identification, they display different inherent characteristics. Areas covered: Considering technologies allowing detection and identification of fungal species in a sepsis context, the market proposes either tests on positive blood culture or tests on patient's whole blood. In this review, the authors describe and compare the ePlex® Blood Culture Identification Fungal Pathogen (BCID-FP) test, a fully automated one-step single-use cartridge assay that has been designed to detect identify frequent or rare but emerging, fungal species, from positive blood culture. A comparison with the competing kits is provided. Expert commentaries: The ePlex BCID-FP test provides a diversified and rather relevant panel. Its easy-to-use cartridges allow flexible use around the clock. Nevertheless, prospective clinical studies assessing the time-to-result benefit on antifungal stewardship and on hospital length of stay are not available yet. New tools aim to benefit clinicians and patients, but they should be accompanied by supervision of result interpretation and adaptation of antifungal stewardship.

Direct identification of clinical pathogens from liquid culture media by MALDI-TOF MS analysis

OBJECTIVES

We propose using MALDI-TOF MS as a tool for identifying microorganisms directly from liquid cultures after enrichment of the clinical sample in the media, to obtain a rapid microbiological diagnosis and an adequate administration of the antibiotic therapy in a clinical setting.

METHODS

To evaluate this approach, a series of quality control isolates were grown in thioglycollate (TG) broth and brain heart infusion (BHI) broth and extracted under four different protocols before finally being identified by MALDI-TOF MS. After establishing the best extraction protocol, we validated the method in a total of 300 liquid cultures (150 in TG broth and 150 in BHI broth) of different types of clinical samples obtained from two tertiary Spanish hospitals.

RESULTS

The initial evaluation showed that the extraction protocol including a 5 minute sonication step yielded 100% valid identifications, with an average score value of 2.305. In the clinical validation of the procedure, 98% of the microorganisms identified from the TG broth were correctly identified relative to 97% of those identified from the BHI broth. In 24% of the samples analysed, growth by direct sowing was only successful in the liquid medium, and no growth was observed in the direct solid agar cultures.

CONCLUSIONS

Use of MALDI-TOF MS plus the sonication-based extraction method enabled direct and accurate identification of microorganisms in liquid culture media in 15 minutes, in contrast to the 24 hours of subculture required for conventional identification, allowing the administration of a targeted antimicrobial therapy.

Matrix-Assisted Laser Desorption Ionization-Time of Flight Mass Spectrometry for Use with Positive Blood Cultures: Methodology, Performance, and Optimization

Early initiation of effective antibiotics for septic patients is essential for patient survival. Matrix-assisted desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) has revolutionized clinical microbiology for isolate identification and has the possibility to impact how blood culture testing is performed. This review discusses the various uses of MALDI-TOF MS for the identification and susceptibility testing of positive blood cultures, the performance of these methods, and the outcomes involved with its implementation.

MALDI-TOF MS typing enables the classification of brewing yeasts of the genus Saccharomyces to major beer styles

Brewing yeasts of the genus Saccharomyces are either available from yeast distributor centers or from breweries employing their own “in-house strains”. During the last years, the classification and characterization of yeasts of the genus Saccharomyces was achieved by using biochemical and DNA-based methods. The current lack of fast, cost-effective and simple methods to classify brewing yeasts to a beer type, may be closed by Matrix Assisted Laser Desorption/Ionization–Time-Of-Flight Mass Spectrometry (MALDI-TOF MS) upon establishment of a database based on sub-proteome spectra from reference strains of brewing yeasts. In this study an extendable “brewing yeast” spectra database was established including 52 brewing yeast strains of the most important types of bottom- and top-fermenting strains as well as beer-spoiling S. cerevisiae var. diastaticus strains. 1560 single spectra, prepared with a standardized sample preparation method, were finally compared against the established database and investigated by bioinformatic analyses for similarities and distinctions. A 100% separation between bottom-, top-fermenting and S. cerevisiae var. diastaticus strains was achieved. Differentiation between Alt and Kölsch strains was not achieved because of the high similarity of their protein patterns. Whereas the Ale strains show a high degree of dissimilarity with regard to their sub-proteome. These results were supported by MDS and DAPC analysis of all recorded spectra. Within five clusters of beer types that were distinguished, and the wheat beer (WB) cluster has a clear separation from other groups. With the establishment of this MALDI-TOF MS spectra database proof of concept is provided of the discriminatory power of this technique to classify brewing yeasts into different major beer types in a rapid, easy way, and focus brewing trails accordingly. It can be extended to yeasts for specialty beer types and other applications including wine making or baking.

Yeasts

Yeasts are unicellular organisms that reproduce mostly by budding and less often by fission. Most medically important yeasts originate from Ascomycota or Basidiomycota. Here, we review taxonomy, epidemiology, disease spectrum, antifungal drug susceptibility patterns of medically important yeast, laboratory diagnosis, and diagnostic strategies.

The combined rapid detection and species-level identification of yeasts in simulated blood culture using a colorimetric sensor array

Background

A colorimetric sensor array (CSA) has been demonstrated to rapidly detect and identify bacteria growing in blood cultures by obtaining a species-specific “fingerprint” of the volatile organic compounds (VOCs) produced during growth. This capability has been demonstrated in prokaryotes, but has not been reported for eukaryotic cells growing in culture. The purpose of this study was to explore if a disposable CSA could differentially identify 7 species of pathogenic yeasts growing in blood culture.

Methods

Culture trials of whole blood inoculated with a panel of clinically important pathogenic yeasts at four different microorganism loads were performed. Cultures were done in both standard BacT/Alert and CSA-embedded bottles, after adding 10 mL of spiked blood to each bottle. Color changes in the CSA were captured as images by an optical scanner at defined time intervals. The captured images were analyzed to identify the yeast species. Time to detection by the CSA was compared to that in the BacT/Alert system.

Results

One hundred sixty-two yeast culture trials were performed, including strains of several species of Candida (Ca. albicans, Ca. glabrata, Ca. parapsilosis, and Ca. tropicalis), Clavispora (synonym Candida) lusitaniae, Pichia kudriavzevii (synonym Candida krusei) and Cryptococcus neoformans, at loads of 8.2 × 10⁵, 8.3 × 10³, 8.5 × 10¹, and 1.7 CFU/mL. In addition, 8 negative trials (no yeast) were conducted. All negative trials were correctly identified as negative, and all positive trials were detected. Colorimetric responses were species-specific and did not vary by inoculum load over the 500000-fold range of loads tested, allowing for accurate species-level identification. The mean sensitivity for species-level identification by CSA was 74% at detection, and increased with time, reaching almost 95% at 4 hours after detection. At an inoculum load of 1.7 CFU/mL, mean time to detection with the CSA was 6.8 hours (17%) less than with the BacT/Alert platform.

Conclusion

The CSA combined rapid detection of pathogenic yeasts in blood culture with accurate species-level identification.

Fungal Species Identification by MALDI-ToF Mass Spectrometry

MALDI-TOF MS has become the standard method for routine identification of most microbial organisms in clinical laboratories and has largely replaced biochemical assays. Classification relies on extensive well curated databases, ideally covering the full spectrum of microorganisms encountered in the specimens at hands. The protocols for harvesting cells and procuring material suitable for downstream MALDI-TOF MS analyses vary in specific details between the different groups of organisms, e.g., gram-positive or -negative bacteria, mycobacteria, or fungi. With respect to fungi, methods further vary between yeasts and moulds; and even among different mould genera if they do not lyse in a similar fashion. Purification of microbial materials from clinical specimen allows the direct identification of bacteria; however this is not yet fully adapted to fungi. In this chapter, I look into the differences between the underlying methods for yeast and moulds, and for production of samples suitable for MALDI-TOF MS species identification from cultures and different clinical materials.

Optimized Use of the MALDI BioTyper System and the FilmArray BCID Panel for Direct Identification of Microbial Pathogens from Positive Blood Cultures

Despite the current reliance on blood cultures (BCs), the diagnosis of bloodstream infections (BSIs) can be sped up using new technologies performed directly on positive BC bottles. Two methods (the MALDI BioTyper system and FilmArray blood culture identification [BCID] panel) are potentially applicable. In this study, we performed a large-scale clinical evaluation (1,585 microorganisms from 1,394 BSI episodes) on the combined use of the MALDI BioTyper and FilmArray BCID panel compared to a reference (culture-based) method. As a result, the causative organisms of 97.7% (1,362/1,394) of the BSIs were correctly identified by our MALDI BioTyper and FilmArray BCID-based algorithm. Specifically, 65 (5.3%) out of 1,223 monomicrobial BCs that provided incorrect or invalid identifications with the MALDI BioTyper were accurately detected by the FilmArray BCID panel; additionally, 153 (89.5%) out of 171 polymicrobial BCs achieved complete identification with the FilmArray BCID panel. Conversely, full use of the MALDI BioTyper would have resulted in the identification of only 1 causative organism in 97/171 (56.7%) of the polymicrobial cultures. By applying our diagnostic algorithm, the median time to identification was shortened (19.5 h versus 41.7 h with the reference method; P < 0.001), and the minimized use of the FilmArray BCID panel led to a significant cost savings. Twenty-six out of 31 microorganisms that could not be identified were species/genera not designed to be detected with the FilmArray BCID panel, indicating that subculture was not dispensable for a few of our BSI episodes. In summary, the fast and effective testing of BC bottles is realistically adoptable in the clinical microbiology laboratory workflow, although the usefulness of this testing for the management of BSIs remains to be established.

Pushing the Limits of MALDI-TOF Mass Spectrometry: Beyond Fungal Species Identification

Matrix assisted laser desorption ionization time of flight (MALDI-TOF) is a powerful analytical tool that has revolutionized microbial identification. Routinely used for bacterial identification, MALDI-TOF has recently been applied to both yeast and filamentous fungi, confirming its pivotal role in the rapid and reliable diagnosis of infections. Subspecies-level identification holds an important role in epidemiological investigations aimed at tracing virulent or drug resistant clones. This review focuses on present and future applications of this versatile tool in the clinical mycology laboratory.

MALDI-TOF mass spectrometry following short incubation on a solid medium is a valuable tool for rapid pathogen identification from positive blood cultures

INTRODUCTION

Rapid identification of the causative microorganism is a key element in appropriate antimicrobial therapy of bloodstream infections. Whereas traditional analysis of positive blood cultures requires subculture over at least 16-24h prior to pathogen identification by, e.g. matrix-assisted laser-desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS), sample preparation procedures enabling direct MALDI-TOF MS, i.e. without preceding subculture, are associated with additional effort and costs. Hence, we integrated an alternative MALDI-TOF MS approach in diagnostic routine using a short incubation on a solid medium.

MATERIALS AND METHODS

Positive blood cultures were routinely plated on chocolate agar plates and incubated for 4h (37 °C, 5% CO2). Subsequently, MALDI-TOF MS using a Microflex LT instrument (Bruker Daltonics) and direct smear method was performed once per sample. For successful identification of bacteria at species level, score cut-off values were used as proposed by the manufacturer (≥ 2.0) and in a modified form (≥ 1.5 for MALDI-TOF MS results referring to Gram-positive cocci and ≥ 1.7 for MALDI-TOF MS results referring to bacteria other than Gram-positive cocci). Further data analysis also included an assessment of the clinical impact of the MALDI-TOF MS result.

RESULTS

Applying the modified score cut-off values, our approach led to an overall correct species identification in 69.5% with misidentification in 3.4% (original cut-offs: 49.2% and 1.8%, respectively); for Gram-positive cocci, correct identification in 68.4% (100% for Staphylococcus aureus and enterococci, 80% for beta-hemolytic streptococci), for Gram-negative bacteria, correct identification in 97.6%. In polymicrobial blood cultures, in 72.7% one of the pathogens was correctly identified. Results were not reliable for Gram-positive rods and yeasts. The approach was easy to implement in diagnostic routine. In cases with available clinical data and successful pathogen identification, in 51.1% our approach allowed an optimized treatment recommendation.

CONCLUSION

MALDI-TOF MS following 4h pre-culture is a valuable tool for rapid pathogen identification from positive blood cultures, allowing easy integration in diagnostic routine and the opportunity of considerably earlier treatment adaptation.

Rapid identification of pathogens in positive blood culture of patients with sepsis: review and meta-analysis of the performance of the sepsityper kit

Sepsis is one of the leading causes of deaths, and rapid identification (ID) of blood stream infection is mandatory to perform adequate antibiotic therapy. The advent of MALDI-TOF Mass Spectrometry for the rapid ID of pathogens was a major breakthrough in microbiology. Recently, this method was combined with extraction methods for pathogens directly from positive blood cultures. This review summarizes the results obtained so far with the commercial Sepsityper sample preparation kit, which is now approved for in vitro diagnostic use. Summarizing data from 21 reports, the Sepsityper kit allowed a reliable ID on the species level of 80% of 3320 positive blood culture bottles. Gram negative bacteria resulted consistently in higher ID rates (90%) compared to Gram positive bacteria (76%) or yeast (66%). No relevant misidentifications on the genus level were reported at a log(score)cut-off of 1.6. The Sepsityper kit is a simple and reproducible method which extends the MALDI-TOF technology to positive blood culture specimens and shortens the time to result by several hours or even days. In combination with antibiotic stewardship programs, this rapid ID allows a much faster optimization of antibiotic therapy in patients with sepsis compared to conventional workflows.

Multicenter evaluation of Candida QuickFISH BC for identification of Candida species directly from blood culture bottles

Candida species are common causes of bloodstream infections (BSI), with high mortality. Four species cause >90% of Candida BSI: C. albicans, C. glabrata, C. parapsilosis, and C. tropicalis. Differentiation of Candida spp. is important because of differences in virulence and antimicrobial susceptibility. Candida QuickFISH BC, a multicolor, qualitative nucleic acid hybridization assay for the identification of C. albicans (green fluorescence), C. glabrata (red fluorescence), and C. parapsilosis (yellow fluorescence), was tested on Bactec and BacT/Alert blood culture bottles which signaled positive on automated blood culture devices and were positive for yeast by Gram stain at seven study sites. The results were compared to conventional identification. A total of 419 yeast-positive blood culture bottles were studied, consisting of 258 clinical samples (89 C. glabrata, 79 C. albicans, 23 C. parapsilosis, 18 C. tropicalis, and 49 other species) and 161 contrived samples inoculated with clinical isolates (40 C. glabrata, 46 C. albicans, 36 C. parapsilosis, 19 C. tropicalis, and 20 other species). A total of 415 samples contained a single fungal species, with C. glabrata (n = 129; 30.8%) being the most common isolate, followed by C. albicans (n = 125; 29.8%), C. parapsilosis (n = 59; 14.1%), C. tropicalis (n = 37; 8.8%), and C. krusei (n = 17; 4.1%). The overall agreement (with range for the three major Candida species) between the two methods was 99.3% (98.3 to 100%), with a sensitivity of 99.7% (98.3 to 100%) and a specificity of 98.0% (99.4 to 100%). This study showed that Candida QuickFISH BC is a rapid and accurate method for identifying C. albicans, C. glabrata, and C. parapsilosis, the three most common Candida species causing BSI, directly from blood culture bottles.

An in-house assay is superior to Sepsityper for direct matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) mass spectrometry identification of yeast species in blood cultures

We developed an in-house assay for the direct identification, by matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) mass spectrometry, of yeasts in blood culture. Sixty-one representative strains from 12 species were analyzed in spiked blood cultures. Our assay accurately identified 95 of 107 (88.8%) positive blood cultures and outperformed the commercial Sepsityper kit (81.7% identification).

Rapid identification and susceptibility testing of Candida spp. from positive blood cultures by combination of direct MALDI-TOF mass spectrometry and direct inoculation of Vitek 2

Fungaemia is associated with high mortality rates and early appropriate antifungal therapy is essential for patient management. However, classical diagnostic workflow takes up to several days due to the slow growth of yeasts. Therefore, an approach for direct species identification and direct antifungal susceptibility testing (AFST) without prior time-consuming sub-culturing of yeasts from positive blood cultures (BCs) is urgently needed. Yeast cell pellets prepared using Sepsityper kit were used for direct identification by MALDI-TOF mass spectrometry (MS) and for direct inoculation of Vitek 2 AST-YS07 card for AFST. For comparison, MALDI-TOF MS and Vitek 2 testing were performed from yeast subculture. A total of twenty four positive BCs including twelve C. glabrata, nine C. albicans, two C. dubliniensis and one C. krusei isolate were processed. Applying modified thresholds for species identification (score ≥1.5 with two identical consecutive propositions), 62.5% of BCs were identified by direct MALDI-TOF MS. AFST results were generated for 72.7% of BCs directly tested by Vitek 2 and for 100% of standardized suspensions from 24 h cultures. Thus, AFST comparison was possible for 70 isolate-antifungal combinations. Essential agreement (minimum inhibitory concentration difference ≤1 double dilution step) was 88.6%. Very major errors (VMEs) (false-susceptibility), major errors (false-resistance) and minor errors (false categorization involving intermediate result) amounted to 33.3% (of resistant isolates), 1.9% (of susceptible isolates) and 1.4% providing 90.0% categorical agreement. All VMEs were due to fluconazole or voriconazole. This direct method saved on average 23.5 h for identification and 15.1 h for AFST, compared to routine procedures. However, performance for azole susceptibility testing was suboptimal and testing from subculture remains indispensable to validate the direct finding.

Rapid and accurate direct antibiotic susceptibility testing of blood culture broths using MALDI Sepsityper combined with the BD Phoenix automated system

Antibiotic susceptibility testing with the BD Phoenix system on bacterial cell pellets generated from blood culture broths using the Bruker MALDI Sepsityper kit was evaluated. Seventy-six Gram-negative isolates, including 12 with defined multi-resistant phenotypes, had antibiotic susceptibility testing (AST) performed by Phoenix on the cell pellet in parallel with conventional methods. In total, 1414/1444 (97.9 %) of susceptibility tests were concordant, with only 1 (0.07 %) very major error. This novel method has the potential to reduce the turnaround time for AST results by up to a day for Gram-negative bacteraemias.

Accuracy of matrix-assisted laser desorption ionization-time of flight mass spectrometry for identification of clinical pathogenic fungi: a meta-analysis

Fungal infections in the clinic have become increasingly serious. In many cases, the identification of clinically relevant fungi remains time-consuming and may also be unreliable. Matrix-assisted laser desorption ionization-time of flight mass spectroscopy (MALDI-TOF MS) is a newly developed diagnostic tool that is increasingly being employed to rapidly and accurately identify clinical pathogenic microorganisms. The present meta-analysis aimed to systematically evaluate the accuracy of MALDI-TOF MS for the identification of clinical pathogenic fungi. After a rigorous selection process, 33 articles, involving 38 trials and a total of 9,977 fungal isolates, were included in the meta-analysis. The random-effects pooled identification accuracy of MALDI-TOF MS increased from 0.955 (95% confidence interval [CI], 0.939 to 0.969) at the species level to 0.977 (95% CI, 0.955 to 0.993) at the genus level (P < 0.001; χ(2) = 15.452). Subgroup analyses were performed at the species level for several categories, including strain, source of strain, system, system database, and modified outcomes, to calculate the accuracy and to investigate heterogeneity. These analyses revealed significant differences between the overall meta-analysis and some of the subanalyses. In parallel, significant differences in heterogeneity among different systems and among different methods for calculating the identification ratios were found by multivariate metaregression, but none of the factors, except for the moderator of outcome, was significantly associated with heterogeneity by univariate metaregression. In summary, the MALDI-TOF MS method is highly accurate for the identification of clinically pathogenic fungi; future studies should analyze the comprehensive capability of this technology for clinical diagnostic microbiology.

Evaluation of three rapid diagnostic methods for direct identification of microorganisms in positive blood cultures

The identification of organisms from positive blood cultures generally takes several days. However, recently developed rapid diagnostic methods offer the potential for organism identification within only a few hours of blood culture positivity. In this study, we evaluated the performance of three commercial methods to rapidly identify organisms directly from positive blood cultures: QuickFISH (AdvanDx, Wolburn, MA), Verigene Gram-Positive Blood Culture (BC-GP; Nanosphere, Northbrook, IL), and matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) with Sepsityper processing (Bruker Daltonics, Billerica, MA). A total of 159 blood cultures (VersaTREK Trek Diagnostic Systems, Cleveland, OH) positive for Gram-positive and Gram-negative bacteria as well as yeast were analyzed with QuickFISH and MALDI-TOF MS. In all, 102 blood cultures were analyzed using the BC-GP assay. For monomicrobial cultures, we observed 98.0% concordance with routine methods for both QuickFISH (143/146) and the BC-GP assay (93/95). MALDI-TOF MS demonstrated 80.1% (117/146) and 87.7% (128/146) concordance with routine methods to the genus and species levels, respectively. None of the methods tested were capable of consistently identifying polymicrobial cultures in their entirety or reliably differentiating Streptococcus pneumoniae from viridans streptococci. Nevertheless, the methods evaluated in this study are convenient and accurate for the most commonly encountered pathogens and have the potential to dramatically reduce turnaround time for the provision of results to the treating physician.

Maldi-tof mass spectrometry for microorganism identification

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) is a rapid, reliable, and high-throughput diagnostic tool for the identification of microorganisms. The technology is unique in clinical microbiology, allowing laboratories to definitively identify bacterial and fungal isolates within minutes. The rapid turnaround time and minimal cost for consumables per specimen compared with conventional identification methods have resulted in MALDI-TOF MS being increasingly used in clinical laboratories worldwide. This article summarizes the current literature on MALDI-TOF MS for microbial identification and provides a preview of the method's potential future applications in clinical microbiology.

Matrix-assisted laser desorption ionization-time of flight mass spectrometry: a fundamental shift in the routine practice of clinical microbiology

Within the past decade, clinical microbiology laboratories experienced revolutionary changes in the way in which microorganisms are identified, moving away from slow, traditional microbial identification algorithms toward rapid molecular methods and mass spectrometry (MS). Historically, MS was clinically utilized as a high-complexity method adapted for protein-centered analysis of samples in chemistry and hematology laboratories. Today, matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) MS is adapted for use in microbiology laboratories, where it serves as a paradigm-shifting, rapid, and robust method for accurate microbial identification. Multiple instrument platforms, marketed by well-established manufacturers, are beginning to displace automated phenotypic identification instruments and in some cases genetic sequence-based identification practices. This review summarizes the current position of MALDI-TOF MS in clinical research and in diagnostic clinical microbiology laboratories and serves as a primer to examine the "nuts and bolts" of MALDI-TOF MS, highlighting research associated with sample preparation, spectral analysis, and accuracy. Currently available MALDI-TOF MS hardware and software platforms that support the use of MALDI-TOF with direct and precultured specimens and integration of the technology into the laboratory workflow are also discussed. Finally, this review closes with a prospective view of the future of MALDI-TOF MS in the clinical microbiology laboratory to accelerate diagnosis and microbial identification to improve patient care.

Identification of fungal microorganisms by MALDI-TOF mass spectrometry

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) has emerged as a reliable tool for fast identification and classification of microorganisms. In this regard, it represents a strong challenge to microscopic and molecular biology methods. Nowadays, commercial MALDI systems are accessible for biological research work as well as for diagnostic applications in clinical medicine, biotechnology and industry. They are employed namely in bacterial biotyping but numerous experimental strategies have also been developed for the analysis of fungi, which is the topic of the present review. Members of many fungal genera such as Aspergillus, Fusarium, Penicillium or Trichoderma and also various yeasts from clinical samples (e.g. Candida albicans) have been successfully identified by MALDI-TOF MS. However, there is no versatile method for fungi currently available even though the use of only a limited number of matrix compounds has been reported. Either intact cell/spore MALDI-TOF MS is chosen or an extraction of surface proteins is performed and then the resulting extract is measured. Biotrophic fungal phytopathogens can be identified via a direct acquisition of MALDI-TOF mass spectra e.g. from infected plant organs contaminated by fungal spores. Mass spectrometric peptide/protein profiles of fungi display peaks in the m/z region of 1000-20000, where a unique set of biomarker ions may appear facilitating a differentiation of samples at the level of genus, species or strain. This is done with the help of a processing software and spectral database of reference strains, which should preferably be constructed under the same standardized experimental conditions.

Enhanced diagnostic yields of bacteremia and candidemia in blood specimens by PCR-electrospray ionization mass spectrometry

A prospective study was performed to determine the value of direct molecular testing of whole blood for detecting the presence of culturable and unculturable bacteria and yeasts in patients with suspected bloodstream infections. A total of 464 adult and pediatric patients with positive blood cultures matched with 442 patients with negative blood cultures collected during the same period were recruited during a 10-month study. PCR amplification coupled with electrospray ionization mass spectrometry (PCR-ESI-MS) plus blood culture reached an overall agreement of 78.6% in the detection and species-level identification of bacterial and candidal pathogens. Of 33 culture-negative/PCR-ESI-MS-positive specimens, 31 (93.9%) were judged to be truly bacteremic and/or candidemic based on a medical chart review and analytical metrics. Among the 15 culture-positive specimens in which PCR-ESI-MS detected additional bacterial or yeast species, 66.7% and 20.0% of the additional positive specimens by PCR-ESI-MS were judged to be truly or possibly bacteremic and/or candidemic, respectively. Direct analysis of blood samples by PCR-ESI-MS rapidly detects bacterial and yeast pathogens in patients with bloodstream infections. When used in conjunction with blood culture, PCR-ESI-MS enhances the diagnostics of septicemia by shortening test turnaround time and improving yields.

MALDI-TOF mass spectrometry in the clinical mycology laboratory: identification of fungi and beyond

MALDI-TOF mass spectrometry (MS) is becoming essential in most clinical microbiology laboratories throughout the world. Its successful use is mainly attributable to the low operational costs, the universality and flexibility of detection, as well as the specificity and speed of analysis. Based on characteristic protein spectra obtained from intact cells - by means of simple, rapid and reproducible preanalytical and analytical protocols - MALDI-TOF MS allows a highly discriminatory identification of yeasts and filamentous fungi starting from colonies. Whenever used early, direct identification of yeasts from positive blood cultures has the potential to greatly shorten turnaround times and to improve laboratory diagnosis of fungemia. More recently, but still at an infancy stage, MALDI-TOF MS is used to perform strain typing and to determine antifungal drug susceptibility. In this article, the authors discuss how the MALDI-TOF MS technology is destined to become a powerful tool for routine mycological diagnostics.