Rapid universal identification of bacterial pathogens from clinical cultures by using a novel sloppy molecular beacon melting temperature signature technique

Simulation-guided tunable DNA probe design for mismatch tolerant hybridization

The ability to both sensitively and specifically assess the sequence composition of a nucleic acid strand is an ever-growing field. Designing a detection scheme that can perform this function when the sequence of the target being detected deviates significantly from the canonical sequence however is difficult in part because probe/primer design is based on established Watson-Crick base-pairing rules. We present here a robust and tunable toehold-based exchange probe that can detect a sequence with a variable number of SNPs of unknown identity by inserting a series of controlled, sequential mismatches into the protector seal of the toehold probe, in an effort to make the protector seal "sloppy". We show that the mismatch-tolerant system follows predicted behavior closely even with targets containing up to four mismatches that thermodynamically deviate from the canonical sequence by up to 15 kcal/mole. The system also performs faithfully regardless of the global mismatch position on either the protector seal or target. Lastly, we demonstrate the generalizability of the approach by testing the increasingly mismatch-tolerant protectors on HIV clinical samples to show that the system is capable of resolving multiple, iteratively mutated sequences derived from numerous HIV sub-populations with remarkable precision.

DNA melting analysis

Melting is a fundamental property of DNA that can be monitored by absorbance or fluorescence. PCR conveniently produces enough DNA to be directly monitored on real-time instruments with fluorescently labeled probes or dyes. Dyes monitor the entire PCR product, while probes focus on a specific locus within the amplicon. Advances in amplicon melting include high resolution instruments, saturating DNA dyes that better reveal multiple products, prediction programs for domain melting, barcode taxonomic identification, high speed microfluidic melting, and highly parallel digital melting. Most single base variants and small insertions or deletions can be genotyped by high resolution amplicon melting. High resolution melting also enables heterozygote scanning for any variant within a PCR product. A web application (uMelt, http://www.dna-utah.org) predicts amplicon melting curves with multiple domains, a useful tool for verifying intended products. Additional applications include methylation assessment, copy number determination and verification of sequence identity. When amplicon melting does not provide sufficient detail, unlabeled probes or snapback primers can be used instead of covalently labeled probes. DNA melting is a simple, inexpensive, and powerful tool with many research applications that is beginning to make its mark in clinical diagnostics.

Melting temperature mapping method using imperfect-match linear long probes

Identifying pathogenic microorganisms as early as possible is critical for selecting the appropriate antimicrobial therapy in infected patients. We previously reported the development of the Tm mapping method for identifying a broad range of pathogenic bacteria within 3 h of blood collection. However, the Tm mapping identification requires an analytical instrument with a tube-to-tube variation of no more than 0.1 °C, so we can only use a few instruments that have such high thermal accuracy. To address the problem, we developed the improved Tm mapping method using imperfect-match linear long quenching probes (IMLL Q-probes). Using IMLL Q-probes, almost all commercially available analytical instruments can be used for the Tm mapping method. Some bacterial species cannot be narrowed down to one species, but they can at least be narrowed down to the genus level. The Tm mapping method using IMLL Q-probes is useful for deciding on antimicrobial therapy in infected patients.

An expanded RT-PCR melting temperature coding assay to rapidly identify all known SARS-CoV-2 variants and sub-variants of concern

The continued emergence of vaccine-resistant SARS-CoV-2 variants of concern (VOC) requires specific identification of each VOC as it arises. Here, we report an expanded version of our previously described sloppy molecular beacon (SMB) melting temperature (Tm) signature-based assay for VOCs, now modified to include detection of Delta (B.1.617.2) and Omicron (B.1.1.529) sub-variants. The SMB-VOC assay targets the signature codons 501, 484 and 452 in the SARS-CoV-2 spike protein which we show can specifically detect and differentiate all known VOCs including the Omicron subvariants (BA.1, BA.2, BA.2.12.1, BA.4/BA.5). The limit of detection (LOD) of the assay was 20, 22 and 36 genomic equivalents (GE) per reaction with the Delta, Omicron BA.1 and BA.2 respectively. Clinical validation of the 3-codon assay in the LC480 instrument showed the assay detected 94% (81/86) of the specimens as WT or VOCs and 6% (5/86) of the tests producing indeterminate results compared to sequencing. Sanger sequencing also failed for four samples. None of the specimens were incorrectly identified as WT or as a different VOC by our assay. Thus, excluding specimens with indeterminant results, the assay was 100% sensitive and 100% specific compared to Sanger sequencing for variant identification. This new assay concept can be easily expanded to add newer variants and can serve as a robust diagnostic tool for selecting appropriate monoclonal antibody therapy and rapid VOC surveillance.

SAMBA: A Multicolor Digital Melting PCR Platform for Rapid Microbiome Profiling

During the past decade, breakthroughs in sequencing technology have provided the basis for studies of the myriad ways in which microbial communities in and on the human body influence human health and disease. In almost every medical specialty, there is now a growing interest in accurate and quantitative profiling of the microbiota for use in diagnostic and therapeutic applications. However, the current next-generation sequencing approach for microbiome profiling is costly, requires laborious library preparation, and is challenging to scale up for routine diagnostics. Split, Amplify, and Melt analysis of BActeria-community (SAMBA), a novel multicolor digital melting polymerase chain reaction platform with unprecedented multiplexing capability is presented, and the capability to distinguish and quantify 16 bacteria species in mixtures is demonstrated. Subsequently, SAMBA is applied to measure the compositions of bacteria in the gut microbiome to identify microbial dysbiosis related to colorectal cancer. This rapid, low cost, and high-throughput approach will enable the implementation of microbiome diagnostics in clinical laboratories and routine medical practice.

PlexProbes enhance qPCR multiplexing by discriminating multiple targets in each fluorescent channel

The probe technology described in this paper facilitates detection and discrimination of multiple targets in a single fluorescent channel during PCR. This provides a strategy for doubling the number of targets that can be analysed simultaneously on existing PCR instruments. These probes are referred to as PlexProbes and produce fluorescence that can be switched ‘on’ or ‘off’ in the presence of target by manipulating the temperature. During PCR, fluorescence can be measured at multiple temperatures allowing discrimination of specific targets at defined temperatures. In a single fluorescent channel, a model duplex assay allowed either real-time or endpoint detection of Chlamydia trachomatis (CT) at 52°C and end-point detection of Neisseria gonorrhoeae (GC) at 74°C. Using this model system, as few as 40 copies of each specific target could be detected as single infection or co-infection, regardless of the presence or absence of the other target. A PlexProbe prototype assay for sexually transmitted infections (PP-STI) which simultaneously enables detection and differentiation of six targets using only three fluorescent channels was then constructed and evaluated. The PP-STI assay detects GC (2 gene targets), CT, Mycoplasma genitalium (MG), Trichomonas vaginalis (TV) and an internal control (IC). To evaluate assay performance, a panel of archived clinical samples (n = 337) were analysed using PP-STI and results compared to those obtained with a commercially available diagnostic assay. The overall agreement between results obtained with the PP-STI assay and the reference test was greater than 99.5%. PlexProbes offer a method of detecting more targets from a single diagnostic test, empowering physicians to make evidence-based treatment decisions while conserving time, labour, sample volume and reagent costs.

Antimicrobial Resistance in Common Respiratory Pathogens of Chronic Bronchiectasis Patients: A Literature Review

Non-cystic fibrosis bronchiectasis is a chronic disorder in which immune system dysregulation and impaired airway clearance cause mucus accumulation and consequent increased susceptibility to lung infections. The presence of pathogens in the lower respiratory tract causes a vicious circle resulting in impaired mucociliary function, bronchial inflammation, and progressive lung injury. In current guidelines, antibiotic therapy has a key role in bronchiectasis management to treat acute exacerbations and chronic infection and to eradicate bacterial colonization. Contrastingly, antimicrobial resistance, with the risk of multidrug-resistant pathogen development, causes nowadays great concern. The aim of this literature review was to assess the role of antibiotic therapy in bronchiectasis patient management and possible concerns regarding antimicrobial resistance based on current evidence. The authors of this review stress the need to expand research regarding bronchiectasis with the aim to assess measures to reduce the rate of antimicrobial resistance worldwide.

Application of Short Pre-enrichment, and Double Chemistry Real-Time PCR, Combining Fluorescent Probes and an Intercalating Dye, for Same-Day Detection and Confirmation of Salmonella spp. and Escherichia coli O157 in Ground Beef and Chicken Samples

Molecular methods, particularly those based on real-time PCR (qPCR), have become a popular approach to detect pathogens in food samples. This technique may take advantage of hydrolysis fluorescent probes for increased specificity. Even though suitable, this approach loses the capacity of performing result confirmation by melt curve analysis. In the current study, we developed an alternative approach, combining fluorescent probes along with an intercalating dye (SYBR Green) in order to simultaneously detect, and confirm the result, of two foodborne pathogens (Salmonella spp. and Escherichia coli O157). This new approach named double chemistry qPCR was combined with a short pre-enrichment in order to obtain a multiplex “same-day” detection method for the selected pathogens. The evaluation of the novel method in spiked food samples (ground beef and chicken breast) obtained values of relative sensitivity, specificity, and accuracy higher than 95%, and Cohen’s kappa of 0.92, with a Limit of Detection₉₅ below 5 cfu/25 g, demonstrating its reliability. In addition to this, the method was challenged by inoculating heat-stressed bacteria as well as dead ones. It was observed that it was also possible to detect stressed bacteria with an initial inoculation level below 10 cfu/25 g. Also, it was noticed that high initial concentration of either pathogen (higher than 10⁴ cfu/25 g) was needed in order to generate false positive results due to the presence of dead bacteria, thus the method presents potential for its application in the specific detection of live microorganisms.

Rapid Identification of Candida Species in Candidemia Directly from Blood Samples Using Imperfect Match Probes

Candidemia is associated with a high mortality rate, and initial adequate antifungal therapy results in a significant decrease in the crude mortality. We herein report a rapid method that can identify eight Candida species in candidemia using imperfect match quenching probes (IM Q-probes) within three and a half hours of whole blood sample collection. Furthermore, employing the D value, which reflects the difference between the Tm signature from a clinical isolate and that registered in the database, it is possible to quickly identify samples suitable for IM Q-probe identification. We first evaluated the method using 34 Candida colonies collected from different patients, and 100% (34/34) of the identification results matched the preidentified Candida species. We then performed blind tests using eight whole blood samples artificially mixed with eight different Candida species respectively, and all identification results correctly matched the preidentified Candida species. Finally, using 16 whole blood samples collected from candidemia patients, we compared the IM Q-probe method with the culture/sequencing method. Of a total of 16 patient samples, 100% (16/16) matched the culture and sequencing results. The IM Q-probe method is expected to contribute not only to the life expectancy of candidemia patients but also to antifungal stewardship.

Automatic Identification of Individual rpoB Gene Mutations Responsible for Rifampin Resistance in Mycobacterium tuberculosis by Use of Melting Temperature Signatures Generated by the Xpert MTB/RIF Ultra Assay

Molecular surveillance of rifampin-resistant Mycobacterium tuberculosis can help to monitor the transmission of the disease. The Xpert MTB/RIF Ultra assay detects mutations in the rifampin resistance-determining region (RRDR) of the rpoB gene by the use of melting temperature (T_m ) information from 4 rpoB probes which can fall in one of the 9 different assay-specified T_m windows. The large amount of T_m data generated by the assay offers the possibility of an RRDR genotyping approach more accessible than whole-genome sequencing. In this study, we developed an automated algorithm to specifically identify a wide range of mutations in the rpoB RRDR by utilizing the pattern of the T_m of the 4 probes within the 9 windows generated by the Ultra assay. The algorithm builds a RRDR mutation-specific "T_m signature" reference library from a set of known mutations and then identifies the RRDR genotype of an unknown sample by measuring the T_m distances between the test sample and the reference T_m values. Validated using a set of clinical isolates, the algorithm correctly identified RRDR genotypes of 93% samples with a wide range of rpoB single and double mutations. Our analytical approach showed a great potential for fast RRDR mutation identification and may also be used as a stand-alone method for ruling out relapse or transmission between patients. The algorithm can be further modified and optimized for higher accuracy as more Ultra data become available.

Direct antimicrobial susceptibility testing from positive blood culture bottles in laboratories lacking automated antimicrobial susceptibility testing systems

BACKGROUND

Timely initiation of appropriate antimicrobial can improve the outcome in terms of reduced morbidity and mortality in addition to reduced health-care costs. Availability of early preliminary Antimicrobial Susceptibility Test (AST) report will be useful in directing antimicrobial therapy. The aim of the study was to correlate AST by disc diffusion method, directly from positively flagged blood culture bottles, with the AST by automated method.

METHODS

A total of 144 aerobic blood culture bottles flagged positive by the automated blood culture system were processed. The bacteria were pelleted by two-step centrifugation of the broth from the bottle and used to make a smear for Gram stain as well as an inoculum for antimicrobial sensitivity testing by Kirby Bauer disc diffusion method. Automated identification and AST were also carried out.

RESULTS

On direct staining, 94 samples showed gram-negative bacilli, 39 showed gram-positive cocci, and 11 showed yeasts or polymicrobial growth. In the case of gram-negative bacteria, there was 99% categorical agreement between direct sensitivity testing and automated sensitivity testing with 1% disagreement. Among the gram-positive cocci, there was 96% categorical agreement with 4% disagreement between the two methods.

CONCLUSION

High degree of agreement between the two methods is promising and applicable to situations where automated sensitivity testing is not available. Even if the systems are available, this method would prove useful as an adjunct to standard AST reporting. This sensitivity report can be generated earlier than the conventional AST, enabling choice of appropriate antimicrobial.

Color-coded molecular beacons for multiplex PCR screening assays

The number of different fluorescent colors that can be distinguished in a PCR screening assay restricts the number of different targets that can be detected. If only six colors can be distinguished, and the probe for each target is labeled with a unique color, then only six different targets can be identified. Yet, it is often desirable to identify more targets. For instance, the rapid identification of which bacterial species (if any) is present in a patient's normally sterile blood sample, out of a long list of species, would enable appropriate actions to be taken to prevent sepsis. We realized that the number of different targets that can be identified in a screening assay can be increased significantly by utilizing a unique combination of two colors for the identification of each target species. We prepared a demonstration assay in which 15 different molecular beacon probe pairs were present, each pair specific for the same identifying sequence in the 16S ribosomal RNA gene of a different bacterial species, and each pair labeled with a unique combination of two fluorophores out of the six differently colored fluorophores that our PCR instrument could distinguish. In a set of PCR assays, each containing all 30 color-coded molecular beacons, and each containing DNA from a different bacterial species, the only two colors that arose in each real-time assay identified the species-specific target sequence that was present. Due to the intrinsic low background of molecular beacon probes, these reactions were specific and extremely sensitive, and the threshold cycle reflected the abundance of the target sequence present in each sample.

Speciation of fungi using real time PCR with molecular beacons: Can we solve the enigma of diagnosis of invasive fungal disease?

BACKGROUND

Invasive fungal diseases (IFDs) are difficult to diagnose and associated with high mortality rates, especially in the immunosuppressed. Species of Aspergillus and Candida are the cause of majority of invasive fungal disease however IFDs are also caused by Fusarium, Zygomycetes, Trichosporon, etc. Early detection is crucial for appropriate antifungal therapy. Blood cultures usually fail to isolate filamentous fungi, while detection of circulating beta-d-glucan or galactomannan antigens show variable sensitivity and specificity. There is a need of reliable, sensitive and specific diagnostic tests for IFDs.

METHODS

A real-time Polymerase Chain Reaction (PCR) assay with a universal primer/molecular beacon system was developed for detecting and speciating most of the pathogenic fungi implicated in IFD. A single-reaction assay was designed targeting a carefully selected region of the ITS2 and ITS5 subunits of the fungal rDNA gene along with four molecular beacons capable of differential hybridization to the amplicons of different species. This generated a signature set of melting temperatures using the standard strains. The assay was tested on clinical specimens from patients with suspected invasive fungal disease.

RESULTS

The assay was tested on 72 clinical samples and 72 healthy controls. Of these, 22 clinical samples (6/8 proven; 13/29 probable; 3/35 possible IFD, classified by the EORTC/MSG criteria) were positive by PCR and generated a set of melting temperatures enabling identification of the causative fungus. The assay was negative in all healthy controls.

CONCLUSION

The molecular beacon assay is a promising tool providing a rapid method for detection and monitoring of invasive fungal disease in immunosuppressed patients.

Development and validation of a method for human papillomavirus genotyping based on molecular beacon probes

We describe a new assaying system for the detection and genotyping of human papillomavirus (HPV) based on linear-after-the-exponential-PCR(LATE-PCR) and melting curve analysis. The 23 most prevalent HPV strains (types 6, 11, 16, 18, 31, 33, 35, 39, 42, 45, 51, 52, 53, 56, 58, 59, 66, 68, 70, 73, 81, 82, and 83) are assayed in two sealed reaction tubes within 2 h. Good sensitivity and specificity was evaluated by testing cloned HPV DNA and clinical samples. The detection limit was 5–500 copies/reaction depending on the genotype. No cross-reactivity was observed with the other HPV types that are not covered by our method or pathogens tested which were commonly found in female genital tract. When compared with the HPV GenoArray Diagnostic kit, the results from 1104 clinical samples suggest good overall agreement between the two methods,(98.37%, 95% CI: 97.44%–98.97%) and the kappa value was 0.954. Overall, this new HPV genotyping assay system presents a simple, rapid, universally applicable, sensitive, and highly specific detection methodology that should be useful for HPV detection and genotyping, therefore, is potentially of great value in clinical application.

Rapid Microarray-Based Detection of Rifampin, Isoniazid, and Fluoroquinolone Resistance in Mycobacterium tuberculosis by Use of a Single Cartridge

The rapid and robust identification of mutations in Mycobacterium tuberculosis complex (MTBC) strains mediating multidrug-resistant (MDR) and extensively drug-resistant (XDR) phenotypes is crucial to combating the MDR tuberculosis (TB) epidemic. Currently available molecular anti-TB drug susceptibility tests either are restricted to a single target or drug (i.e., the Xpert MTB/RIF test) or present a risk of cross-contamination due to the design limitations of the open platform (i.e., line probe assays). With a good understanding of the technical and commercial boundaries, we designed a test cartridge based on an oligonucleotide array into which dried reagents are introduced and which has the ability to identify MTBC strains resistant to isoniazid, rifampin, and the fluoroquinolones. The melting curve assay interrogates 43 different mutations in the rifampin resistance-determining region (RRDR) of rpoB, rpoB codon 572, katG codon 315, the inhA promoter region, and the quinolone resistance-determining region (QRDR) of gyrA in a closed cartridge system within 90 min. Assay performance was evaluated with 265 clinical MTBC isolates, including MDR/XDR, non-MDR, and fully susceptible isolates, from a drug resistance survey performed in Swaziland in 2009 and 2010. In 99.5% of the cases, the results were consistent with data previously acquired utilizing Sanger sequencing. The assay, which uses a closed cartridge system in combination with a battery-powered Alere q analyzer and which has the potential to extend the current gene target panel, could serve as a rapid and robust point-of-care test in settings lacking a comprehensive molecular laboratory infrastructure to differentiate TB patients infected with MDR and non-MDR strains and to assist clinicians with their early treatment decisions.

Detection of Isoniazid-, Fluoroquinolone-, Amikacin-, and Kanamycin-Resistant Tuberculosis in an Automated, Multiplexed 10-Color Assay Suitable for Point-of-Care Use

Extensively drug-resistant (XDR) tuberculosis (TB) cannot be easily or quickly diagnosed. We developed a rapid, automated assay for the detection of XDR-TB plus resistance to the drug isoniazid (INH) for point-of-care use. Using a simple filter-based cartridge with an integrated sample processing function, the assay identified a wide selection of wild-type and mutant sequences associated with XDR-TB directly from sputum. Four new large-Stokes-shift fluorophores were developed. When these four Stokes-shift fluorophores were combined with six conventional fluorophores, 10-color probe detection in a single PCR tube was enabled. A new three-phase, double-nested PCR approach allowed robust melting temperature analysis with enhanced limits of detection (LODs). Finally, newly designed sloppy molecular beacons identified many different mutations using a small number of probes. The assay correctly distinguished wild-type sequences from 32 commonly occurring mutant sequences tested in gyrA, gyrB, katG, and rrs genes and the promoters of inhA and eis genes responsible for resistance to INH, the fluoroquinolone (FQ) drugs, amikacin (AMK), and kanamycin (KAN). The LOD was 300 CFU of Mycobacterium tuberculosis in 1 ml sputum. The rate of detection of heteroresistance by the assay was equivalent to that by Sanger sequencing. In a blind study of 24 clinical sputum samples, resistance mutations were detected in all targets with 100% sensitivity, with the specificity being 93.7 to 100%. Compared to the results of phenotypic susceptibility testing, the sensitivity of the assay was 75% for FQs and 100% each for INH, AMK, and KAN and the specificity was 100% for INH and FQ and 94% for AMK and KAN. Our approach could enable testing for XDR-TB in point-of-care settings, potentially identifying highly drug-resistant TB more quickly and simply than currently available methods.

Universal microbial diagnostics using random DNA probes

Early identification of pathogens is essential for limiting development of therapy-resistant pathogens and mitigating infectious disease outbreaks. Most bacterial detection schemes use target-specific probes to differentiate pathogen species, creating time and cost inefficiencies in identifying newly discovered organisms. We present a novel universal microbial diagnostics (UMD) platform to screen for microbial organisms in an infectious sample, using a small number of random DNA probes that are agnostic to the target DNA sequences. Our platform leverages the theory of sparse signal recovery (compressive sensing) to identify the composition of a microbial sample that potentially contains novel or mutant species. We validated the UMD platform in vitro using five random probes to recover 11 pathogenic bacteria. We further demonstrated in silico that UMD can be generalized to screen for common human pathogens in different taxonomy levels. UMD's unorthodox sensing approach opens the door to more efficient and universal molecular diagnostics.

Melting Temperature Mapping Method: A Novel Method for Rapid Identification of Unknown Pathogenic Microorganisms within Three Hours of Sample Collection

Acquiring the earliest possible identification of pathogenic microorganisms is critical for selecting the appropriate antimicrobial therapy in infected patients. We herein report the novel “melting temperature (Tm) mapping method” for rapidly identifying the dominant bacteria in a clinical sample from sterile sites. Employing only seven primer sets, more than 100 bacterial species can be identified. In particular, using the Difference Value, it is possible to identify samples suitable for Tm mapping identification. Moreover, this method can be used to rapidly diagnose the absence of bacteria in clinical samples. We tested the Tm mapping method using 200 whole blood samples obtained from patients with suspected sepsis, 85% (171/200) of which matched the culture results based on the detection level. A total of 130 samples were negative according to the Tm mapping method, 98% (128/130) of which were also negative based on the culture method. Meanwhile, 70 samples were positive according to the Tm mapping method, and of the 59 suitable for identification, 100% (59/59) exhibited a “match” or “broad match” with the culture or sequencing results. These findings were obtained within three hours of whole blood collection. The Tm mapping method is therefore useful for identifying infectious diseases requiring prompt treatment.

Comparative Evaluation of Sloppy Molecular Beacon and Dual-Labeled Probe Melting Temperature Assays to Identify Mutations in Mycobacterium tuberculosis Resulting in Rifampin, Fluoroquinolone and Aminoglycoside Resistance

Several molecular assays to detect resistance to Rifampin, the Fluoroquinolones, and Aminoglycosides in Mycobacterium tuberculosis (M. tuberculosis) have been recently described. A systematic approach for comparing these assays in the laboratory is needed in order to determine the relative advantage of each assay and to decide which ones should be advanced to evaluation. We performed an analytic comparison of a Sloppy Molecular Beacon (SMB) melting temperature (Tm) assay and a Dual labeled probe (DLP) Tm assay. Both assays targeted the M. tuberculosis rpoB, gyrA, rrs genes and the eis promoter region. The sensitivity and specificity to detect mutations, analytic limit of detection (LOD) and the detection of heteroresistance were tested using a panel of 56 clinical DNA samples from drug resistant M. tuberculosis strains. Both SMB and DLP assays detected 29/29 (100%) samples with rpoB RRDR mutations and 3/3 (100%) samples with eis promoter mutations correctly. The SMB assay detected all 17/17 gyrA mutants and 22/22 rrs mutants, while the DLP assay detected 16/17 (94%) gyrA mutants and 12/22 (55%) rrs mutants. Both assays showed comparable LODs for detecting rpoB and eis mutations; however, the SMB assay LODs were at least two logs better for detecting wild type and mutants in gyrA and rrs targets. The SMB assay was also moderately better at detecting heteroresistance. In summary, both assays appeared to be promising methods to detect drug resistance associated mutations in M. tuberculosis; however, the relative advantage of each assay varied under each test condition.

Label-free molecular beacons for biomolecular detection

Biomolecular detection and imaging methods provide quantitative measurements essential for biological research. In this context, molecular beacon based sensors have emerged as powerful, no-wash imaging agents, providing target-specific fluorescent activation for nucleic acids, proteins, and small molecules. Conventional molecular beacons require double-labeled DNA sequences, which are costly and time-consuming to prepare. To address this issue, we developed DNA based label-free molecular beacons consisting of two regions: a signal-generating region based on human telomeric G-quadruplex sequence that activates Thioflavin T fluorescence and a target recognition sequence designed to interact in a molecular beacon format. We demonstrated the utility of these probes for the selective detection of DNA, RNA, and protein. Multiple probes were applied against a single target to achieve improved brightness in fluorescence detection of nucleic acid targets. This label-free strategy provides a straightforward, cost-effective alternative to fluorescently labeled oligonucleotides in biomolecular detection and imaging.

Enhanced nucleic acid amplification with blood in situ by wire-guided droplet manipulation (WDM)

There are many challenges facing the use of molecular biology to provide pertinent information in a timely, cost effective manner. Wire-guided droplet manipulation (WDM) is an emerging format for conducting molecular biology with unique characteristics to address these challenges. To demonstrate the use of WDM, an apparatus was designed and assembled to automate polymerase chain reaction (PCR) on a reprogrammable platform. WDM minimizes thermal resistance by convective heat transfer to a constantly moving droplet in direct contact with heated silicone oil. PCR amplification of the GAPDH gene was demonstrated at a speed of 8.67 s/cycle. Conventional PCR was shown to be inhibited by the presence of blood. WDM PCR utilizes molecular partitioning of nucleic acids and other PCR reagents from blood components, within the water-in-oil droplet, to increase PCR reaction efficiency with blood in situ. The ability to amplify nucleic acids in the presence of blood simplifies pre-treatment protocols towards true point-of-care diagnostic use. The 16s rRNA hypervariable regions V3 and V6 were amplified from Klebsiella pneumoniae genomic DNA with blood in situ. The detection limit of WDM PCR was 1 ng/μL or 10(5)genomes/μL with blood in situ. The application of WDM for rapid, automated detection of bacterial DNA from whole blood may have an enormous impact on the clinical diagnosis of infections in bloodstream or chronic wound/ulcer, and patient safety and morbidity.

Universal digital high-resolution melt: a novel approach to broad-based profiling of heterogeneous biological samples

Comprehensive profiling of nucleic acids in genetically heterogeneous samples is important for clinical and basic research applications. Universal digital high-resolution melt (U-dHRM) is a new approach to broad-based PCR diagnostics and profiling technologies that can overcome issues of poor sensitivity due to contaminating nucleic acids and poor specificity due to primer or probe hybridization inaccuracies for single nucleotide variations. The U-dHRM approach uses broad-based primers or ligated adapter sequences to universally amplify all nucleic acid molecules in a heterogeneous sample, which have been partitioned, as in digital PCR. Extensive assay optimization enables direct sequence identification by algorithm-based matching of melt curve shape and Tm to a database of known sequence-specific melt curves. We show that single-molecule detection and single nucleotide sensitivity is possible. The feasibility and utility of U-dHRM is demonstrated through detection of bacteria associated with polymicrobial blood infection and microRNAs (miRNAs) associated with host response to infection. U-dHRM using broad-based 16S rRNA gene primers demonstrates universal single cell detection of bacterial pathogens, even in the presence of larger amounts of contaminating bacteria; U-dHRM using universally adapted Lethal-7 miRNAs in a heterogeneous mixture showcases the single copy sensitivity and single nucleotide specificity of this approach.

Design and Construction of a Single-Tube, LATE-PCR, Multiplex Endpoint Assay with Lights-On/Lights-Off Probes for the Detection of Pathogens Associated with Sepsis

Aims. The goal of this study was to construct a single tube molecular diagnostic multiplex assay for the detection of microbial pathogens commonly associated with septicemia, using LATE-PCR and Lights-On/Lights-Off probe technology. Methods and Results. The assay described here identified pathogens associated with sepsis by amplification and analysis of the 16S ribosomal DNA gene sequence for bacteria and specific gene sequences for fungi. A sequence from an unidentified gene in Lactococcus lactis subsp. cremoris served as a positive control for assay function. LATE-PCR was used to generate single-stranded amplicons that were then analyzed at endpoint over a wide temperature range in a specific fluorescent color. Each bacterial target was identified by its pattern of hybridization to Lights-On/Lights-Off probes derived from molecular beacons. Complex mixtures of targets were also detected. Conclusions. All microbial targets were identified in samples containing low starting copy numbers of pathogen genomic DNA, both as individual targets and in complex mixtures. Significance and Impact of the Study. This assay uses new technology to achieve an advance in the field of molecular diagnostics: a single-tube multiplex assay for identification of pathogens commonly associated with sepsis.

Pollution impacts on bacterioplankton diversity in a tropical urban coastal lagoon system

Despite a great number of published studies addressing estuarine, freshwater and marine bacterial diversity, few have examined urban coastal lagoons in tropical habitats. There is an increasing interest in monitoring opportunistic pathogens as well as indigenous microbial community members in these water bodies by current molecular and microbiological approaches. In this work, bacterial isolates were obtained through selective plate dilution methods to evaluate antibiotic resistances. In addition, 16S rRNA gene libraries were prepared from environmental waters and mixed cultures grown in BHI medium inoculated with Jacarepaguá lagoon waters. Denaturing gradient gel electrophoresis (DGGE) analyses showed distinct community profiles between environmental communities from each studied site and their cultured counterparts. A total of 497 bacterial sequences were analyzed by MOTHUR, yielding 245 operational taxonomic units (OTUs) grouped at 97% similarity. CCA diagrams showcased how several environmental variables affect the distribution of 18 bacterial orders throughout the three distinct habitats. UniFrac metrics and Venn diagrams revealed that bacterial communities retrieved through each experimental approach were significantly different and that only one OTU, closely related to Vibrio cholerae, was shared between them. Potentially pathogenic bacteria were isolated from most sampled environments, fifty percent of which showed antibiotic resistance.

Molecular logic gates for DNA analysis: detection of rifampin resistance in M. tuberculosis DNA

Elementary, Dr. Watson! A combination of YES and OR logic gates was applied to differentiate between DNA sequences of wild-type and rifampin-resistant (Rif(r)) Mycobacterium tuberculosis (Mtb) in a multiplex real-time fluorescent assay.

Fluorescent signatures for variable DNA sequences

Life abounds with genetic variations writ in sequences that are often only a few hundred nucleotides long. Rapid detection of these variations for identification of genetic diseases, pathogens and organisms has become the mainstay of molecular science and medicine. This report describes a new, highly informative closed-tube polymerase chain reaction (PCR) strategy for analysis of both known and unknown sequence variations. It combines efficient quantitative amplification of single-stranded DNA targets through LATE-PCR with sets of Lights-On/Lights-Off probes that hybridize to their target sequences over a broad temperature range. Contiguous pairs of Lights-On/Lights-Off probes of the same fluorescent color are used to scan hundreds of nucleotides for the presence of mutations. Sets of probes in different colors can be combined in the same tube to analyze even longer single-stranded targets. Each set of hybridized Lights-On/Lights-Off probes generates a composite fluorescent contour, which is mathematically converted to a sequence-specific fluorescent signature. The versatility and broad utility of this new technology is illustrated in this report by characterization of variant sequences in three different DNA targets: the rpoB gene of Mycobacterium tuberculosis, a sequence in the mitochondrial cytochrome C oxidase subunit 1 gene of nematodes and the V3 hypervariable region of the bacterial 16 s ribosomal RNA gene. We anticipate widespread use of these technologies for diagnostics, species identification and basic research.

The potential of high resolution melting analysis (hrma) to streamline, facilitate and enrich routine diagnostics in medical microbiology

BACKGROUND

Routine medical microbiology diagnostics relies on conventional cultivation followed by phenotypic techniques for identification of pathogenic bacteria and fungi. This is not only due to tradition and economy but also because it provides pure culture needed for antibiotic susceptibility testing. This review focuses on the potential of High Resolution Melting Analysis (HRMA) of double-stranded DNA for future routine medical microbiology.

METHODS AND RESULTS

Search of MEDLINE database for publications showing the advantages of HRMA in routine medical microbiology for identification, strain typing and further characterization of pathogenic bacteria and fungi in particular. The results show increasing numbers of newly-developed and more tailor-made assays in this field. For microbiologists unfamiliar with technical aspects of HRMA, we also provide insight into the technique from the perspective of microbial characterization.

CONCLUSIONS

We can anticipate that the routine availability of HRMA in medical microbiology laboratories will provide a strong stimulus to this field. This is already envisioned by the growing number of medical microbiology applications published recently. The speed, power, convenience and cost effectiveness of this technology virtually predestine that it will advance genetic characterization of microbes and streamline, facilitate and enrich diagnostics in routine medical microbiology without interfering with the proven advantages of conventional cultivation.

Molecular beacons in diagnostics

Recent technical advances have begun to realize the potential of molecular beacons to test for diverse infections in clinical diagnostic laboratories. These include the ability to test for, and quantify, multiple pathogens in the same clinical sample, and to detect antibiotic resistant strains within hours. The design principles of molecular beacons have also spawned a variety of allied technologies.

Rapid, high-throughput detection of rifampin resistance and heteroresistance in Mycobacterium tuberculosis by use of sloppy molecular beacon melting temperature coding

Rifampin resistance in Mycobacterium tuberculosis is largely determined by mutations in an 80-bp rifampin resistance determining region (RRDR) of the rpoB gene. We developed a rapid single-well PCR assay to identify RRDR mutations. The assay uses sloppy molecular beacons to probe an asymmetric PCR of the M. tuberculosis RRDR by melting temperature (T(m)) analysis. A three-point T(m) code is generated which distinguishes wild-type from mutant RRDR DNA sequences in approximately 2 h. The assay was validated on synthetic oligonucleotide targets containing the 44 most common RRDR mutations. It was then tested on a panel of DNA extracted from 589 geographically diverse clinical M. tuberculosis cultures, including isolates with wild-type RRDR sequences and 25 different RRDR mutations. The assay detected 236/236 RRDR mutant sequences as mutant (sensitivity, 100%; 95% confidence interval [CI], 98 to 100%) and 353/353 RRDR wild-type sequences as wild type (specificity, 100%; 95% CI, 98.7 to 100%). The assay identified 222/225 rifampin-resistant isolates as rifampin resistant (sensitivity, 98.7%; 95% CI, 95.8 to 99.6%) and 335/336 rifampin-susceptible isolates as rifampin susceptible (specificity, 99.7%; 95% CI, 95.8 to 99.6%). All mutations were either individually identified or clustered into small mutation groups using the triple T(m) code. The assay accurately identified mixed (heteroresistant) samples and was shown analytically to detect RRDR mutations when present in at least 40% of the total M. tuberculosis DNA. This was at least as accurate as Sanger DNA sequencing. The assay was easy to use and well suited for high-throughput applications. This new sloppy molecular beacon assay should greatly simplify rifampin resistance testing in clinical laboratories.

Highly sensitive detection of Staphylococcus aureus directly from patient blood

Background

Rapid detection of bloodstream infections (BSIs) can be lifesaving. We investigated the sample processing and assay parameters necessary for highly-sensitive detection of bloodstream bacteria, using Staphylococcus aureus as a model pathogen and an automated fluidic sample processing – polymerase chain reaction (PCR) platform as a model diagnostic system.

Methodology/Principal Findings

We compared a short 128 bp amplicon hemi-nested PCR and a relatively shorter 79 bp amplicon nested PCR targeting the S. aureus nuc and sodA genes, respectively. The sodA nested assay showed an enhanced limit of detection (LOD) of 5 genomic copies per reaction or 10 colony forming units (CFU) per ml blood over 50 copies per reaction or 50 CFU/ml for the nuc assay. To establish optimal extraction protocols, we investigated the relative abundance of the bacteria in different components of the blood (white blood cells (WBCs), plasma or whole blood), using the above assays. The blood samples were obtained from the patients who were culture positive for S. aureus. Whole blood resulted in maximum PCR positives with sodA assay (90% positive) as opposed to cell-associated bacteria (in WBCs) (71% samples positive) or free bacterial DNA in plasma (62.5% samples positive). Both the assays were further tested for direct detection of S. aureus in patient whole blood samples that were contemporaneous culture positive. S. aureus was detected in 40/45 of culture-positive patients (sensitivity 89%, 95% CI 0.75–0.96) and 0/59 negative controls with the sodA assay (specificity 100%, 95% CI 0.92–1).

Conclusions

We have demonstrated a highly sensitive two-hour assay for detection of sepsis causing bacteria like S. aureus directly in 1 ml of whole blood, without the need for blood culture.

Elderly patients with community-acquired pneumonia: optimal treatment strategies

Community-acquired pneumonia (CAP) is a common infectious disease that still causes substantial morbidity and mortality. Elderly people are frequently affected, and several issues related to care of this condition in the elderly have to be considered. This article reviews current recommendations of guidelines with a special focus on aspects of the care of elderly patients with CAP. The most common pathogen in CAP is still Streptococcus pneumoniae, followed by other pathogens such as Haemophilus influenzae, Mycoplasma pneumoniae, Chlamydophila pneumoniae and Legionella species. Antimicrobial resistance is an increasing problem, especially with regard to macrolide-resistant S. pneumoniae and fluoroquinolone-resistant strains. With regard to β-lactam antibacterials, resistance by H. influenzae and Moraxella catarrhalis is important, as is the emergence of multidrug-resistant Staphylococcus aureus. The main management decisions should be guided by the severity of disease, which can be assessed by validated clinical risk scores such as CURB-65, a tool for measuring the severity of pneumonia based on assessment of confusion, serum urea, respiratory rate and blood pressure in patients aged ≥65 years. For the treatment of low-risk pneumonia, an aminopenicillin such as amoxicillin with or without a β-lactamase inhibitor is frequently recommended. Monotherapy with macrolides is also possible, although macrolide resistance is of concern. When predisposing factors for special pathogens are present, a β-lactam antibacterial combined with a β-lactamase inhibitor, or the combination of a β-lactam antibacterial, a β-lactamase inhibitor and a macrolide, may be warranted. If possible, patients who have undergone previous antibacterial therapy should receive drug classes not previously used. For hospitalized patients with non-severe pneumonia, a common recommendation is empirical antibacterial therapy with an aminopenicillin in combination with a β-lactamase inhibitor, or with fluoroquinolone monotherapy. With proven Legionella pneumonia, a combination of β-lactams with a fluoroquinolone or a macrolide is beneficial. In severe pneumonia, ureidopenicillins with β-lactamase inhibitors, broad-spectrum cephalosporins, macrolides and fluoroquinolones are used. A combination of a broad-spectrum β-lactam antibacterial (e.g. cefotaxime or ceftriaxone), piperacillin/tazobactam and a macrolide is mostly recommended. In patients with a predisposition for Pseudomonas aeruginosa, a combination of piperacillin/tazobactam, cefepime, imipenem or meropenem and levofloxacin or ciprofloxacin is frequently used. Treatment duration of more than 7 days is not generally recommended, except for proven infections with P. aeruginosa, for which 15 days of treatment appears to be appropriate. Further care issues in all hospitalized patients are timely administration of antibacterials, oxygen supply in case of hypoxaemia, and fluid management and dose adjustments according to kidney function. The management of elderly patients with CAP is a challenge. Shifts in antimicrobial resistance and the availability of new antibacterials will change future clinical practice. Studies investigating new methods to detect pathogens, determine the optimal antimicrobial regimen and clarify the duration of treatment may assist in further optimizing the management of elderly patients with CAP.

Multiplex real-time PCR melting curve assay to detect drug-resistant mutations of Mycobacterium tuberculosis

Early diagnosis of drug-resistant Mycobacterium tuberculosis is urgently needed to optimize treatment regimens and to prevent the transmission of resistant strains. Real-time PCR assays have been developed to detect drug resistance rapidly, but none of them have been widely applied due to their complexity, high cost, or requirement for advanced instruments. In this study, we developed a real-time PCR method based on melting curve analysis of dually labeled probes. Six probes targeting the rpoB 81-bp core region, katG315, the inhA promoter, the ahpC promoter, and embB306 were designed and validated with clinical isolates. First, 10 multidrug-resistant (MDR) strains with a wide mutation spectrum were used to analyze the melting temperature (T(m)) deviations of different mutations by single real-time PCR. All mutations can be detected by significant T(m) reductions compared to the wild type. Then, three duplex real-time PCRs, with two probes in each, were developed to detect mutations in 158 MDR isolates. Comparison of the results with the sequencing data showed that all mutations covered by the six probes were detected with 100% sensitivity and 100% specificity. Our method provided a new way to rapidly detect drug-resistant mutations in M. tuberculosis. Compared to other real-time PCR methods, we use fewer probes, which are labeled with the same fluorophore, guaranteeing that this assay can be used for detection in a single fluorescent channel or can be run on single-channel instruments. In conclusion, we have developed a widely applicable real-time PCR assay to detect drug-resistant mutations in M. tuberculosis.

Multiplex digital PCR: breaking the one target per color barrier of quantitative PCR

Quantitative polymerase chain reactions (qPCR) based on real-time PCR constitute a powerful and sensitive method for the analysis of nucleic acids. However, in qPCR, the ability to multiplex targets using differently colored fluorescent probes is typically limited to 4-fold by the spectral overlap of the fluorophores. Furthermore, multiplexing qPCR assays requires expensive instrumentation and most often lengthy assay development cycles. Digital PCR (dPCR), which is based on the amplification of single target DNA molecules in many separate reactions, is an attractive alternative to qPCR. Here we report a novel and easy method for multiplexing dPCR in picolitre droplets within emulsions-generated and read out in microfluidic devices-that takes advantage of both the very high numbers of reactions possible within emulsions (>10(6)) as well as the high likelihood that the amplification of only a single target DNA molecule will initiate within each droplet. By varying the concentration of different fluorogenic probes of the same color, it is possible to identify the different probes on the basis of fluorescence intensity. Adding multiple colors increases the number of possible reactions geometrically, rather than linearly as with qPCR. Accurate and precise copy numbers of up to sixteen per cell were measured using a model system. A 5-plex assay for spinal muscular atrophy was demonstrated with just two fluorophores to simultaneously measure the copy number of two genes (SMN1 and SMN2) and to genotype a single nucleotide polymorphism (c.815A>G, SMN1). Results of a pilot study with SMA patients are presented.

Are we ready for novel detection methods to treat respiratory pathogens in hospital-acquired pneumonia?

Hospital-acquired pneumonia represents one of the most difficult treatment challenges in infectious diseases. Many studies suggest that the timely administration of appropriate, pathogen-directed therapy can be lifesaving. Because results of culture and antimicrobial susceptibility testing can take 48 h or longer, physicians currently rely on clinical, epidemiological, and demographic factors to assist with the choice of empiric therapy for antibiotic-resistant pathogens. At present, a number of rapid molecular tests are being developed that identify pathogens and the presence of genetic determinants of antimicrobial resistance (eg, GeneXpert [Cepheid], ResPlex [Qiagen], FilmArray [Idaho Technologies], and Microarray [Check-Points]). In this review, the potential impact that molecular diagnostics has to identify and characterize pathogens that cause hospital-acquired bacterial pneumonia at an early stage is examined. In addition, a perspective on a novel technology, polymerase chain reaction followed by electrospray ionization mass spectrometry, is presented, and its prospective use in the diagnosis of pneumonia is also discussed. The complexities of the pulmonary microbiome represent a novel challenge to clinicians, but many questions still remain even as these technologies improve.

Multiplex fluorescence melting curve analysis for mutation detection with dual-labeled, self-quenched probes

Probe-based fluorescence melting curve analysis (FMCA) is a powerful tool for mutation detection based on melting temperature generated by thermal denaturation of the probe-target hybrid. Nevertheless, the color multiplexing, probe design, and cross-platform compatibility remain to be limited by using existing probe chemistries. We hereby explored two dual-labeled, self-quenched probes, TaqMan and shared-stem molecular beacons, in their ability to conduct FMCA. Both probes could be directly used for FMCA and readily integrated with closed-tube amplicon hybridization under asymmetric PCR conditions. Improved flexibility of FMCA by using these probes was illustrated in three representative applications of FMCA: mutation scanning, mutation identification and mutation genotyping, all of which achieved improved color-multiplexing with easy probe design and versatile probe combination and all were validated with a large number of real clinical samples. The universal cross-platform compatibility of these probes-based FMCA was also demonstrated by a 4-color mutation genotyping assay performed on five different real-time PCR instruments. The dual-labeled, self-quenched probes offered unprecedented combined advantage of enhanced multiplexing, improved flexibility in probe design, and expanded cross-platform compatibility, which would substantially improve FMCA in mutation detection of various applications.

Molecular microbiological methods in the diagnosis of neonatal sepsis

Neonatal sepsis is a major cause of neonatal mortality and morbidity. The current gold standard for diagnosis of sepsis, namely blood culture, suffers from low sensitivity and a reporting delay of approximately 48-72 h. Rapid detection of sepsis and institution of antimicrobial therapy may improve patient outcomes. Rapid and sensitive tests that can inform clinicians regarding the institution or optimization of antimicrobial therapy are urgently needed. The ideal diagnostic test should have adequate specificity and negative predictive value to reliably exclude sepsis and avoid unnecessary antibiotic therapy. We comprehensively searched for neonatal studies that evaluated molecular methods for diagnosis of sepsis. We identified 19 studies that were assessed with respect to assay methodology and diagnostic characteristics. In addition, we also reviewed newer molecular microbiological assays of relevance that have not been fully evaluated in neonates. Molecular methods offer distinct advantages over blood cultures, including increased sensitivity and rapid diagnosis. However, diagnostic accuracy and cost-effectiveness should be established before implementation in clinical practice.

Rapid detection of fluoroquinolone-resistant and heteroresistant Mycobacterium tuberculosis by use of sloppy molecular beacons and dual melting-temperature codes in a real-time PCR assay

Fluoroquinolones (FQ) are important second-line drugs to treat tuberculosis; however, FQ resistance is an emerging problem. Resistance has been mainly attributed to mutations in a 21-bp region of the Mycobacterium tuberculosis gyrA gene, often called the quinolone resistance-determining region (QRDR). We have developed a simple, rapid, and specific assay to detect FQ resistance-determining QRDR mutations. The assay amplifies the M. tuberculosis gyrA QRDR in an asymmetrical PCR followed by probing with two sloppy molecular beacons (SMBs) spanning the entire QRDR. Mutations are detected by melting temperature (T(m)) shifts that occur when the SMBs bind to mismatched sequences. By testing DNA targets corresponding to all known QRDR mutations, we found that one or both of the SMBs produced a T(m) shift of at least 3.6°C for each mutation, making mutation detection very robust. The assay was also able to identify mixtures of wild-type and mutant DNA, with QRDR mutants identified in samples containing as little as 5 to 10% mutant DNA. The assay was blindly validated for its ability to identify the QRDR mutations on DNA extracted from clinical M. tuberculosis strains. Fifty QRDR wild-type samples, 34 QRDR mutant samples, and 8 heteroresistant samples containing mixtures of wild-type and mutant DNA were analyzed. The results showed 100% concordance to conventional DNA sequencing, including a complete identification of all of the mixtures. This SMB T(m) shift assay will be a valuable molecular tool to rapidly detect FQ resistance and to detect the emergence of FQ heteroresistance in clinical samples from tuberculosis patients.

Differentiation of Staphylococcus spp. by high-resolution melting analysis

High-resolution melting analysis (HRMA) is a fast (post-PCR) high-throughput method to scan for sequence variations in a target gene. The aim of this study was to test the potential of HRMA to distinguish particular bacterial species of the Staphylococcus genus even when using a broad-range PCR within the 16S rRNA gene where sequence differences are minimal. Genomic DNA samples isolated from 12 reference staphylococcal strains ( Staphylococcus aureus , Staphylococcus capitis , Staphylococcus caprae , Staphylococcus epidermidis , Staphylococcus haemolyticus , Staphylococcus hominis , Staphylococcus intermedius , Staphylococcus saprophyticus , Staphylococcus sciuri , Staphylococcus simulans , Staphylococcus warneri , and Staphylococcus xylosus ) were subjected to a real-time PCR amplification of the 16S rRNA gene in the presence of fluorescent dye EvaGreen™, followed by HRMA. Melting profiles were used as molecular fingerprints for bacterial species differentiation. HRMA of S. saprophyticus and S. xylosus resulted in undistinguishable profiles because of their identical sequences in the analyzed 16S rRNA region. The remaining reference strains were fully differentiated either directly or via high-resolution plots obtained by heteroduplex formation between coamplified PCR products of the tested staphylococcal strain and phylogenetically unrelated strain.

Evaluation of the analytical performance of the Xpert MTB/RIF assay

We performed the first studies of analytic sensitivity, analytic specificity, and dynamic range for the new Xpert MTB/RIF assay, a nucleic acid amplification-based diagnostic system that detects Mycobacterium tuberculosis and rifampin (RIF) resistance in under 2 h. The sensitivity of the assay was tested with 79 phylogenetically and geographically diverse M. tuberculosis isolates, including 42 drug-susceptible isolates and 37 RIF-resistant isolates containing 13 different rpoB mutations or mutation combinations. The specificity of the assay was tested with 89 nontuberculosis bacteria, fungi, and viruses. The Xpert MTB/RIF assay correctly identified all 79 M. tuberculosis isolates and correctly excluded all 89 nontuberculosis isolates. RIF resistance was correctly identified in all 37 resistant isolates and in none of the 42 susceptible isolates. Dynamic range was assessed by adding 10(2) to 10(7) CFU of M. tuberculosis into M. tuberculosis-negative sputum samples. The assay showed a log-linear relationship between cycle threshold and input CFU over the entire concentration range. Resistance detection in the presence of different mixtures of RIF-resistant and RIF-susceptible DNA was assessed. Resistance detection was dependent on the particular mutation and required between 65% and 100% mutant DNA to be present in the sample for 95% certainty of resistance detection. Finally, we studied whether assay specificity could be affected by cross-contaminating amplicons generated by the GenoType MTBDRplus assay. M. tuberculosis was not detected until at least 10(8) copies of an MTBDRplus amplicon were spiked into 1 ml of sputum, suggesting that false-positive results would be unlikely to occur.