Lab-on-Chip-Based Platform for Fast Molecular Diagnosis of Multidrug-Resistant Tuberculosis

Recent progress in the genotyping of bovine tuberculosis and its rapid diagnosis via nanoparticle-based electrochemical biosensors

Bovine tuberculosis (bTB) is considered a worldwide infectious zoonotic disease. Mycobacterium bovis causes bTB disease. It is one of the Mycobacterium tuberculosis complex (MTBC) members. MTBC is a clonal complex of close relatives with approximately 99.95% similarity. M. bovis is a spillover pathogen that can transmit from animals to humans and rarely from humans to animals with contact. Genotyping techniques are important to discriminate and differentiate between MTBC species. Spoligotyping and mycobacterial interspersed repetitive unit-variable number tandem repeat (MIRU-VNTR) are widely used but they have some limitations. As an alternative, whole genome sequencing approaches have been utilized due to their high-resolution power. They are employed in typing M. bovis and explain the evolutionary and phylogenetic relationships between isolates. The control of bTB disease has attracted a large amount of attention. Rapid and proper diagnosis is necessary for monitoring the disease as an initial step for its control and treatment. Nanotechnology has a potential impact on the rapid diagnosis and treatment of bTB through the use of nanocarrier and metal nanoparticles (NPs). Special attention has been paid to voltammetric and impedimetric electrochemical strategies as facile, sensitive, and selective methods for the efficient detection of tuberculosis. The efficacy of these sensors is enhanced in the presence of NPs, which act as recognition and/or redox probes. Gold, silver, copper, cobalt, graphene, and magnetic NPs, as well as polypyrrole nanowires and multiwalled carbon nanotubes have been employed for detecting tuberculosis. Overall, NP-based electrochemical sensors represent a promising tool for the diagnosis of bTB.

A Miniaturized Silicon Lab-on-Chip for Integrated PCR and Hybridization Microarray for High Multiplexing Nucleic Acids Analysis

A silicon lab-on-chip, for the detection of nucleic acids through the integrated PCR and hybridization microarray, was developed. The silicon lab-on-chip manufactured through bio-MEMS technology is composed of two PCR microreactors (each volume 11.2 µL) and a microarray-hybridization microchamber (volume 30 µL), fluidically connected by buried bypass. It contains heaters and temperature sensors for the management and control of the temperature cycles during the PCR amplification and hybridization processes. A post-silicon process based on (i) plasmo-O2 cleaning/activation, (ii) vapor phase epoxy silanization, (iii) microarray fabrication and (iv) a protein-based passivation step was developed and fully characterized. The ssDNA microarray (4 rows × 10 columns) composed of 400 spots (spot size—70 ± 12 µm; spot-to-spot distance—130 ± 13 µm) was manufactured by piezo-dispense technology. A DNA microarray probe density in the range of 1310 to 2070 probe µm⁻² was observed, together with a limit of detection of about 19 target µm⁻². The performances of the silicon lab-on-chip were validated by the detection of the beta-globin gene directly from human blood. Remarkable sensitivity, multiplexing analysis and specificity were demonstrated for the detection of beta-globin and mycobacterium tuberculosis sequences.

Point-of-care diagnostic tests for tuberculosis disease

Rapid diagnosis is one key pillar to end tuberculosis (TB). Point-of-care tests (POCTs) facilitate early detection, immediate treatment, and reduced transmission of TB disease. This Review evaluates current diagnostic assays endorsed by the World Health Organization and identifies the gaps between existing conventional tests and the ideal POCT. We discuss the commercial development of new rapid tests and research studies on nonsputum-based diagnostic biomarkers from both pathogen and host. Last, we highlight advances in integrated microfluidics technology that may aid the development of new POCTs.

Nanotechnology-Based Strategies for Effective and Rapid Detection of SARS-CoV-2

The coronavirus disease 2019 (COVID-19) pandemic has gained worldwide attention and has prompted the development of innovative diagnostics, therapeutics, and vaccines to mitigate the pandemic. Diagnostic methods based on reverse transcriptase-polymerase chain reaction (RT-PCR) technology are the gold standard in the fight against COVID-19. However, this test might not be easily accessible in low-resource settings for the early detection and diagnosis of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The lack of access to well-equipped clinical laboratories, requirement for the high level of technical competence, and the cost of the RT-PCR test are the major limitations. Moreover, RT-PCR is unsuitable for application at the point-of-care testing (PoCT) as it is time-consuming and lab-based. Due to emerging mutations of the virus and the burden it has placed on the health care systems, there is a growing urgency to develop sensitive, selective, and rapid diagnostic devices for COVID-19. Nanotechnology has emerged as a versatile technology in the production of reliable diagnostic tools for various diseases and offers new opportunities for the development of COVID-19 diagnostic systems. This review summarizes some of the nano-enabled diagnostic systems that were explored for the detection of SARS-CoV-2. It highlights how the unique physicochemical properties of nanoparticles were exploited in the development of novel colorimetric assays and biosensors for COVID-19 at the PoCT. The potential to improve the efficiency of the current assays, as well as the challenges associated with the development of these innovative diagnostic tools, are also discussed.

Microfluidics as a Novel Technique for Tuberculosis: From Diagnostics to Drug Discovery

Tuberculosis (TB) remains a global healthcare crisis, with an estimated 5.8 million new cases and 1.5 million deaths in 2020. TB is caused by infection with the major human pathogen Mycobacterium tuberculosis, which is difficult to rapidly diagnose and treat. There is an urgent need for new methods of diagnosis, sufficient in vitro models that capably mimic all physiological conditions of the infection, and high-throughput drug screening platforms. Microfluidic-based techniques provide single-cell analysis which reduces experimental time and the cost of reagents, and have been extremely useful for gaining insight into monitoring microorganisms. This review outlines the field of microfluidics and discusses the use of this novel technique so far in M. tuberculosis diagnostics, research methods, and drug discovery platforms. The practices of microfluidics have promising future applications for diagnosing and treating TB.

Point-of-care diagnostics for infectious diseases: From methods to devices

The current widespread of COVID-19 all over the world, which is caused by SARS-CoV-2 virus, has again emphasized the importance of development of point-of-care (POC) diagnostics for timely prevention and control of the pandemic. Compared with labor- and time-consuming traditional diagnostic methods, POC diagnostics exhibit several advantages such as faster diagnostic speed, better sensitivity and specificity, lower cost, higher efficiency and ability of on-site detection. To achieve POC diagnostics, developing POC detection methods and correlated POC devices is the key and should be given top priority. The fast development of microfluidics, micro electro-mechanical systems (MEMS) technology, nanotechnology and materials science, have benefited the production of a series of portable, miniaturized, low cost and highly integrated POC devices for POC diagnostics of various infectious diseases. In this review, various POC detection methods for the diagnosis of infectious diseases, including electrochemical biosensors, fluorescence biosensors, surface-enhanced Raman scattering (SERS)-based biosensors, colorimetric biosensors, chemiluminiscence biosensors, surface plasmon resonance (SPR)-based biosensors, and magnetic biosensors, were first summarized. Then, recent progresses in the development of POC devices including lab-on-a-chip (LOC) devices, lab-on-a-disc (LOAD) devices, microfluidic paper-based analytical devices (μPADs), lateral flow devices, miniaturized PCR devices, and isothermal nucleic acid amplification (INAA) devices, were systematically discussed. Finally, the challenges and future perspectives for the design and development of POC detection methods and correlated devices were presented. The ultimate goal of this review is to provide new insights and directions for the future development of POC diagnostics for the management of infectious diseases and contribute to the prevention and control of infectious pandemics like COVID-19.

Mycobacterium bovis: From Genotyping to Genome Sequencing

Mycobacterium bovis is the main pathogen of bovine, zoonotic, and wildlife tuberculosis. Despite the existence of programs for bovine tuberculosis (bTB) control in many regions, the disease remains a challenge for the veterinary and public health sectors, especially in developing countries and in high-income nations with wildlife reservoirs. Current bTB control programs are mostly based on test-and-slaughter, movement restrictions, and post-mortem inspection measures. In certain settings, contact tracing and surveillance has benefited from M. bovis genotyping techniques. More recently, whole-genome sequencing (WGS) has become the preferential technique to inform outbreak response through contact tracing and source identification for many infectious diseases. As the cost per genome decreases, the application of WGS to bTB control programs is inevitable moving forward. However, there are technical challenges in data analyses and interpretation that hinder the implementation of M. bovis WGS as a molecular epidemiology tool. Therefore, the aim of this review is to describe M. bovis genotyping techniques and discuss current standards and challenges of the use of M. bovis WGS for transmission investigation, surveillance, and global lineages distribution. We compiled a series of associated research gaps to be explored with the ultimate goal of implementing M. bovis WGS in a standardized manner in bTB control programs.

A Benchtop Automated Sputum-to-Genotype System Using a Lab-on-a-Film Assembly for Detection of Multidrug-Resistant Mycobacterium tuberculosis

Automated genotyping of drug-resistant Mycobacterium tuberculosis (MTB) directly from sputum is challenging for three primary reasons. First, the sample matrix, sputum, is highly viscous and heterogeneous, posing a challenge for sample processing. Second, acid-fast MTB bacilli are difficult to lyse. And third, there are hundreds of MTB mutations that confer drug resistance. An additional constraint is that MTB is most prevalent where test affordability is paramount. We address the challenge of sample homogenization and cell lysis using magnetic rotation of an external magnet, at high (5000) rpm, to induce the rotation of a disposable stir disc that causes chaotic mixing of glass beads ("MagVor"). Nucleic acid is purified using a pipet tip with an embedded matrix that isolates nucleic acid ("TruTip"). We address the challenge of cost and genotyping multiple mutations using 203 porous three-dimensional gel elements printed on a film substrate and enclosed in a microfluidic laminate assembly ("Lab-on-a-Film"). This Lab-on-a-Film assembly (LFA) serves as a platform for amplification, hybridization, washing, and fluorescent imaging, while maintaining a closed format to prevent amplicon contamination of the workspace. We integrated and automated MagVor homogenization, TruTip purification, and LFA amplification in a multisample, sputum-to-genotype system. Using this system, we report detection down to 43 cfu/mL of MTB bacilli from raw sputum.

A pilot study: VereMTB detection kit for rapid detection of multidrug-resistant mycobcterium tuberculosis in clinical sputum samples

The performance of VereMTB^TM Detection Kit for detection of multidrug-resistant tuberculosis (MDR-TB) was validated by using 124 sputum samples. Comparing with MGIT culture, the sensitivity and specificity of VereMTB Detection Kit for MTBC detection were 97.0% and 98.3%, respectively. Compared with MGIT DST, the sensitivity and specificity of VereMTB Detection Kit for RIF resistance detection were 85.7% and 93.9%, respectively, and the sensitivity and specificity of VereMTB Detection Kit for INH resistance detection were 75.0% and 95.7%, respectively. 6 NTM samples were also detected and identified correctly. The VereMTB Detection Kit can detect MDR-TB rapidly and accurately in sputum samples from TB suspects.

Diagnostic tools for tackling febrile illness and enhancing patient management

Most patients with acute infectious diseases develop fever, which is frequently a reason to visit health facilities in resource-limited settings. The symptomatic overlap between febrile diseases impedes their diagnosis on clinical grounds. Therefore, the World Health Organization promotes an integrated management of febrile illness. Along this line, we present an overview of endemic and epidemic etiologies of fever and state-of-the-art diagnostic tools used in the field. It becomes evident that there is an urgent need for the development of novel technologies to fulfill end-users' requirements. This need can be met with point-of-care and near-patient diagnostic platforms, as well as e-Health clinical algorithms, which co-assess test results with key clinical elements and biosensors, assisting clinicians in patient triage and management, thus enhancing disease surveillance and outbreak alerts. This review gives an overview of diagnostic technologies featuring a platform based approach: (i) assay (nucleic acid amplification technologies are examined); (ii) cartridge (microfluidic technologies are presented); (iii) instrument (various detection technologies are discussed); and at the end proposes a way that such technologies can be interfaced with electronic clinical decision-making algorithms towards a broad and complete diagnostic ecosystem.

TB-EFI, a novel 18-Plex microbead-based method for prediction of second-line drugs and ethambutol resistance in Mycobacterium tuberculosis complex

Several diagnostic tests are being developed to detect drug resistance in tuberculosis. In line with previous developments detecting rifampicin and isoniazid resistance using microbead-based systems (spoligoriftyping and TB-SPRINT), we present here an assay called TB-EFI detecting mutations involved in resistance to ethambutol, fluoroquinolones and the three classical injectable drugs (kanamycin, amikacin and capreomycin) in Mycobacterium tuberculosis. The proposed test includes both wild-type and mutant probes for each targeted locus. Basic analysis can be performed manually. An upgraded interpretation is made available in Excel 2016®. Using a reference set of 61 DNA extracts, we show that TB-EFI provides perfect concordance with pyrosequencing. Concordance between genotypic resistance and phenotypic DST was relatively good (72 to 98% concordance), with lower efficiency for fluoroquinolones and ethambutol due to some untargeted mutations. When compared to phenotypical resistance, performances were similar to those obtained with Hain MTBDRsl assay, possibly thanks to the use of automatized processing of data although some mutations involved in fluoroquinolone resistance could not be included. When applied on three uncharacterized sets, phenotype could be predicted for 51% to 98% depending on the setting and the drug investigated, detecting one extensively drug-resistant isolate in each of a Pakistan and a Brazilian set of 91 samples, and 9 XDR among 43 multi-resistant Kazakhstan samples. By allowing high-throughput detection of second-line drugs resistance and of resistance to ethambutol that is often combined to second-line treatments, TB-EFI is a cost-effective assay for large-scale worldwide surveillance of resistant tuberculosis and XDR-TB control.

Recent technological advancements in tuberculosis diagnostics - A review

Early diagnosis and on-time effective treatment are indispensable for Tuberculosis (TB) control - a life threatening infectious communicable disease. The conventional techniques for diagnosing TB normally take two to three weeks. This delay in diagnosis and further increase in detection complexity due to the emerging risks of XDR-TB (Extensively drug Resistant-TB) and MDR-TB (Multidrug Resistant-TB) are evoking interest of researchers in the field of developing rapid TB detection techniques such as biosensing and other point-of-care (POC) techniques. Biosensing technologies along with the collaboration with nanotechnology have enormous potential to boost the MTB detection and for overall management in clinical diagnosis. A diverse range of portable, sensitive and rapid biosensors based on different signal transducer principles and with different biomarkers detection capabilities have been developed for TB detection in the early stages. Further, a lot of progress has been achieved over the years in developing various point-of-care diagnostic tools including non-molecular methods and molecular techniques. The objective of this study is to present a succinct review of the available TB detection techniques that are either in use or under development. The focus of this review is on the current developments occurred in nano-biosensing technologies. A synopsis of ameliorations in different non-molecular diagnostic tools and progress in the field of molecular techniques along with the role of emerging Lab-on-Chip technology for diagnosing and mitigating the TB consequences have also been presented.

Experimental platform utilising melting curve technology for detection of mutations in Mycobacterium tuberculosis isolates

Tuberculosis (TB) remains one of the most deadly infections with approximately a quarter of cases not being identified and/or treated mainly due to a lack of resources. Rapid detection of TB or drug-resistant TB enables timely adequate treatment and is a cornerstone of effective TB management. We evaluated the analytical performance of a single-tube assay for multidrug-resistant TB (MDR-TB) on an experimental platform utilising RT-PCR and melting curve analysis that could potentially be operated as a point-of-care (PoC) test in resource-constrained settings with a high burden of TB. Firstly, we developed and evaluated the prototype MDR-TB assay using specimens extracted from well-characterised TB isolates with a variety of distinct rifampicin and isoniazid resistance conferring mutations and nontuberculous Mycobacteria (NTM) strains. Secondly, we validated the experimental platform using 98 clinical sputum samples from pulmonary TB patients collected in high MDR-TB settings. The sensitivity of the platform for TB detection in clinical specimens was 75% for smear-negative and 92.6% for smear-positive sputum samples. The sensitivity of detection for rifampicin and isoniazid resistance was 88.9 and 96.0% and specificity was 87.5 and 100%, respectively. Observed limitations in sensitivity and specificity could be resolved by adjusting the sample preparation methodology and melting curve recognition algorithm. Overall technology could be considered a promising PoC methodology especially in resource-constrained settings based on its combined accuracy, convenience, simplicity, speed, and cost characteristics.

Microbiological Sensing Technologies: A Review

Microorganisms have a significant influence on human activities and health, and consequently, there is high demand to develop automated, sensitive, and rapid methods for their detection. These methods might be applicable for clinical, industrial, and environmental applications. Although different techniques have been suggested and employed for the detection of microorganisms, and the majority of these methods are not cost effective and suffer from low sensitivity and low specificity, especially in mixed samples. This paper presents a comprehensive review of microbiological techniques and associated challenges for bioengineering researchers with an engineering background. Also, this paper reports on recent technological advances and their future prospects for a variety of microbiological applications.

Molecular Diagnosis of Tuberculosis

Tuberculosis (TB) is one of the leading causes of adult death in the Asia-Pacific Region, including Indonesia. As an infectious disease caused by Mycobacterium tuberculosis (MTB), TB remains a major public health issue especially in developing nations due to the lack of adequate diagnostic testing facilities. Diagnosis of TB has entered an era of molecular detection that provides faster and more cost-effective methods to diagnose and confirm drug resistance in TB cases, meanwhile, diagnosis by conventional culture systems requires several weeks. New advances in the molecular detection of TB, including the faster and simpler nucleic acid amplification test (NAAT) and whole-genome sequencing (WGS), have resulted in a shorter time for diagnosis and, therefore, faster TB treatments. In this review, we explored the current findings on molecular diagnosis of TB and drug-resistant TB to see how this advancement could be integrated into public health systems in order to control TB.

Xpert® MTB/RIF: Usefulness for the diagnosis of tuberculosis and resistance to rifampicin

The advent of the Xpert® MTB/RIF technique was a revolution in the diagnosis of tuberculosis, especially in areas with high incidence and low resources. It allows the detection of Mycobacterium tuberculosis complex and simultaneously the most common resistance mutations to rifampicin in less than 2h. For respiratory samples the sensitivity is very high, but it decreases for extrapulmonary samples and children. Although it is faster and simpler than conventional methods, it presents some limitations and new and better techniques are needed to reduce the number of cases and deaths caused by tuberculosis. This review aims to assess the scientific evidence around the diagnostic performance of Xpert® MTB/RIF in different types of samples and populations, as well as analyse its strengths and limitations for TB diagnosis.

Application of nanodiagnostics in point-of-care tests for infectious diseases

Although tremendous efforts have been put into the treatment of infectious diseases to prevent epidemics and mortality, it is still one of the major health care issues that have a profound impact on humankind. Therefore, the development of specific, sensitive, accurate, rapid, low-cost, and easy-to-use diagnostic tools is still in urgent demand. Nanodiagnostics, defined as the application of nanotechnology to medical diagnostics, can offer many unique opportunities for more successful and efficient diagnosis and treatment for infectious diseases. In this review, we provide an overview of the nanodiagnostics for infectious diseases from nanoparticle-based, nanodevice-based, and point-of-care test (POCT) platforms. Most importantly, emphasis focused on the recent trends in the nanotechnology-based POCT system. The current state-of-the-art and most promising point-of-care nanodiagnostic technologies, including miniaturized diagnostic magnetic resonance platform, magnetic barcode assay system, cell phone-based polarized light microscopy platform, cell phone-based dongle platform, and paper-based POCT platform, for infectious diseases were fully examined. The limitations, challenges, and future trends of the nanodiagnostics in POCTs for infectious diseases are also discussed.

Strategies for halting the rise of multidrug resistant TB epidemics: assessing the effect of early case detection and isolation

Background

The increasing rates of multidrug resistant TB (MDR-TB) have posed the question of whether control programs under enhanced directly observed treatment, short-course (DOTS-Plus) are sufficient or implemented optimally. Despite enhanced efforts on early case detection and improved treatment regimens, direct transmission of MDR-TB remains a major hurdle for global TB control.

Methods

We developed an agent-based simulation model of TB dynamics to evaluate the effect of transmission reduction measures on the incidence of MDR-TB. We implemented a 15-day isolation period following the start of treatment in active TB cases. The model was parameterized with the latest estimates derived from the published literature.

Results

We found that if high rates (over 90%) of TB case identification are achieved within 4 weeks of developing active TB, then a 15-day patient isolation strategy with 50% effectiveness in interrupting disease transmission leads to 10% reduction in the incidence of MDR-TB over 10 years. If transmission is fully prevented, the rise of MDR-TB can be halted within 10 years, but the temporal reduction of MDR-TB incidence remains below 20% in this period.

Conclusions

The impact of transmission reduction measures on the TB incidence depends critically on the rates and timelines of case identification. The high costs and adverse effects associated with MDR-TB treatment warrant increased efforts and investments on measures that can interrupt direct transmission through early case detection.

Accuracy of line probe assays for the diagnosis of pulmonary and multidrug-resistant tuberculosis: a systematic review and meta-analysis

Only 25% of multidrug-resistant tuberculosis (MDR-TB) cases are currently diagnosed. Line probe assays (LPAs) enable rapid drug-susceptibility testing for rifampicin (RIF) and isoniazid (INH) resistance and Mycobacterium tuberculosis detection. Genotype MTBDRplusV1 was WHO-endorsed in 2008 but newer LPAs have since been developed.

This systematic review evaluated three LPAs: Hain Genotype MTBDRplusV1, MTBDRplusV2 and Nipro NTM+MDRTB. Study quality was assessed with QUADAS-2. Bivariate random-effects meta-analyses were performed for direct and indirect testing. Results for RIF and INH resistance were compared to phenotypic and composite (incorporating sequencing) reference standards. M. tuberculosis detection results were compared to culture.

74 unique studies were included. For RIF resistance (21 225 samples), pooled sensitivity and specificity (with 95% confidence intervals) were 96.7% (95.6–97.5%) and 98.8% (98.2–99.2%). For INH resistance (20 954 samples), pooled sensitivity and specificity were 90.2% (88.2–91.9%) and 99.2% (98.7–99.5%). Results were similar for direct and indirect testing and across LPAs. Using a composite reference standard, specificity increased marginally. For M. tuberculosis detection (3451 samples), pooled sensitivity was 94% (89.4–99.4%) for smear-positive specimens and 44% (20.2–71.7%) for smear-negative specimens.

In patients with pulmonary TB, LPAs have high sensitivity and specificity for RIF resistance and high specificity and good sensitivity for INH resistance. This meta-analysis provides evidence for policy and practice.

Line probe assays have high accuracy for detection of RIF resistance and INH resistancehttp://ow.ly/USX5305tqFV

Spoligotyping of Mycobacterium tuberculosis Complex Isolates by Use of Ligation-Based Amplification and Melting Curve Analysis

We report here a ligation-based spoligotyping that can identify unamplified spacers in membrane-based spoligotyping due to asymmetric insertion of IS6110 in the direct repeat locus. Our typing yielded 84.4% (411/487) concordance with traditional typing and 100% (487/487) accuracy when confirmed by DNA sequencing.

The development, evaluation and performance of molecular diagnostics for detection of Mycobacterium tuberculosis

The unique pathogenesis of tuberculosis (TB) poses several barriers to the development of accurate diagnostics: a) the establishment of life-long latency by Mycobacterium tuberculosis (M.tb) after primary infection confounds the development of classical antibody or antigen based assays; b) our poor understanding of the molecular pathways that influence progression from latent to active disease; c) the intracellular nature of M.tb infection in tissues means that M.tb and/or its components, are not readily detectable in peripheral specimens; and d) the variable presence of M.tb bacilli in specimens from patients with extrapulmonary TB or children. The literature on the current portfolio of molecular diagnostics tests for TB is reviewed here and the developmental pipeline is summarized. Also reviewed are data from recently published operational research on the GeneXpert MTB/RIF assay and discussed are the lessons that can be taken forward for the design of studies to evaluate the impact of TB diagnostics.

[Tuberculosis and immigration]

The incidence of tuberculosis worldwide is declining. However, in Western countries this decline is slower due to the impact of immigration. Tuberculosis in the immigrant population is related to health status in the country of origin and with overcrowding and poverty conditions in the host country. Immigrants with tuberculosis are younger, have a higher prevalence of extrapulmonary forms, greater proportion of drug resistance and higher treatment default rates than those of natives. New molecular techniques not only reduce diagnostic delay time but also allow the rapid identification of resistances and improve knowledge of transmission patterns. It is necessary to implement measures to improve treatment compliance in this population group like facilitating access to health card, the use of fixed-dose combination drugs, the participation of cultural mediators and community health workers and gratuity of drugs.

The Race Is On To Shorten the Turnaround Time for Diagnosis of Multidrug-Resistant Tuberculosis

To realize the most benefit from multidrug-resistant tuberculosis (MDR-TB) screening, all nucleic acid amplification test (NAAT)-positive respiratory specimens should be universally tested. Once an MDR-TB diagnosis is established, additional testing is warranted to provide details about the detected mutations. The lab-on-chip technology described by A. M. Cabibbe et al. (J Clin Microbiol 53:3876-3880, 2015, http://dx.doi.org/10.1128/JCM.01824-15) potentially provides this much needed information.