Real-time PCR assay for a unique chromosomal sequence of Bacillus anthracis

Terbium Phenanthroline Complex as a Luminescent Probe for the Detection of Anthrax Biomarker: Dipicolinic acid

Dipicolinic acid (DPA) is a prominent biomarker for Anthrax disease. Bacillus anthracis bacterial endospores is composed of DPA as the significant component, which on over inhalation can cause severe health issues. Such contagious and life-threatening pathogens can be employed as bioweapons or biothreat agents for spreading bioterrorism which is a major risk for national security and public health concerns. Hence, effective detection or a surveillance system is essential for preventing the growth of bioterrorism events. Herein, we have developed a Terbium - 1,10 Phenanthroline (Tb-Phen) based lanthanide luminescence complex with bright green fluorescence. On addition of DPA, the green fluorescence is turn-off at a linear range from 0.6 to 4.762 mM. In this effect, 5D4- 7F5 transition caused by 1,10-phenanthroline to Tb3+ at 544 nm is restricted due to energy transfer quenching and Inner Filter Effect (IFE). The developed probe shows good sensitivity towards the detection of DPA with other coexisting biomolecules and ions with a low Limit of Detection (LOD) of 5.029 µM. The practical feasibility was evaluated in paper strip assay and extended in real samples such as human serum and tap water with satisfactory recovery percentage. Thereby, probe finds promising application in sensing of anthrax spore biomarker (DPA) and biothreat agents.

Tb3+-Based Off-On Fluorescent Platform for Multicolor and Dosage-Sensitive Visualization of Bacterial Spore Marker

Developing a novel strategy for the sensitive and rapid detection of pathogenic bacterial spores in field or on-site settings will be helpful in minimizing their potential threats to human health, environmental safety, and food safety. In this study, Tb³⁺ was combined with glutathione (GSH)-modified copper nanoclusters (CuNCs), and an aggregation-induced emission (AIE) fluorescent probe based on Tb-GSH-CuNCs was fabricated for dipicolinic acid (DPA, a pathogenic bacterial spore marker) sensing. Making use of the competitive binding of Tb³⁺ between GSH-CuNCs and DPA, a multicolor sensing of DPA was facilely realized without introducing fluorescent materials as the reference. Due to an "off-on" response mechanism of the AIE fluorescent probe, this multicolor response to DPA exhibited a feature of rich color gradients and highly discriminative color change, allowing a dosage-sensitive visual quantification of DPA. The DPA with a concentration even as low as 0.5 μM can still be identified by the naked eye. Moreover, together with a smartphone app, which can extract the R (red), G (green), and B (blue) values from the probe system, a portable platform can be established for sensitive DPA quantification in the range of 0.5-70 μM, showing great potential for the practical monitoring of DPA in field or on-site settings.

A luminescent terbium(iii) probe as an efficient ‘Turn-ON’ sensor for dipicolinic acid, a Bacillus Anthracis biomarker

This work drives the potential of lanthanide luminescence in the quantification and detection of the B. Anthracis bacterial spore by targeting dipicolinic acid (DPA), a principal component of anthrax spores.

A structure-dependent ratiometric fluorescence sensor based on metal-organic framework for detection of 2,6-pyridinedicarboxylic acid

In the present work, a structure-dependent ratiometric fluorescence (RF) sensor constructed with boric acid-modified carbon quantum dots (B-CQDs) and Tb-MOF(MOF-76) was developed for sensing 2,6-pyridinedicarboxylic acid (DPA). Based on the distinct fluorescent responses of B-CQDs and MOF-76 to DPA, MOF-76/B-CQDs can be developed as a RF sensor for DPA detection. In this RF sensor, the reticulated cross-linked structure of MOF-76/B-CQDs can be destroyed by DPA due to a strong coordination effect between DPA and the Tb of MOF-76, resulting in the quenching of the fluorescence of B-CQD and the restoration of the fluorescence of MOF-76 after the addition of DPA. Benefiting from the confinement effect of the special structure change, the presented sensor showed high sensitivity toward DPA with a detection limit of 3.05 μM and excellent selectivity over the monochromatic fluorescence sensor.

A weakly luminescent Tb-MOF-based “turn-on” sensor for the highly selective and sensitive sensing of an anthrax biomarker

A weakly luminescent Tb-MOF-based “turn-on” sensor for the highly selective and sensitive sensing of an anthrax biomarker was demonstrated.

Anti-infective nitazoxanide disrupts transcription of ribosome biogenesis-related genes in yeast

BACKGROUND

Nitazoxanide is a broad-spectrum, anti-parasitic, anti-protozoal, anti-viral drug, whose mechanisms of action have remained elusive.

OBJECTIVE

In this study, we aimed to provide insight into the mechanisms of action of nitazoxanide and the related eukaryotic host responses by characterizing transcriptome profiles of Saccharomyces cerevisiae exposed to nitazoxanide.

METHODS

RNA-Seq was used to investigate the transcriptome profiles of three strains of S. cerevisiae with dsRNA virus-like elements, including a strain that hosts M28 encoding the toxic protein K28. From the strain with M28, an additional sub-strain was prepared by excluding M28 using a nitazoxanide treatment.

RESULTS

Our transcriptome analysis revealed the effects of nitazoxanide on ribosome biogenesis. Many genes related to the UTP A, UTP B, Mpp10-Imp3-Imp4, and Box C/D snoRNP complexes were differentially regulated by nitazoxanide exposure in all of the four tested strains/sub-strains. Examples of the differentially regulated genes included UTP14, UTP4, NOP4, UTP21, UTP6, and IMP3. The comparison between the M28-laden and non-M28-laden sub-strains showed that the mitotic cell cycle was more significantly affected by nitazoxanide exposure in the non-M28-laden sub-strain.

CONCLUSIONS

Overall, our study reveals that nitazoxanide disrupts regulation of ribosome biogenesis-related genes in yeast.

Ratiometric fluorescence detection of dipicolinic acid based on Microporous Ln/melamine-terephthaladehyde schiff base networks complex

Lanthanide-based fluorescence sensor in the detection of major Anthrax biomarker dipicolinic acid (DPA) is attracting wide attention. In this work, we proposed a new strategy for ratiometric fluorescence detection of DPA based on microporous Ln/melamine-terephthaladehyde Schiff base networks (Ln/MTSNW) complex for the first time. The microporous MTSNW was prepared by amine-aldehyde condensation between melamine and terephthaladehyde and presented lamellar and octahedral structure. Lanthanide ions, Eu³⁺ or Tb³⁺ were coordinated with N atoms of MTSNW to form Ln/MTSNW complex. The microporous Ln/MTSNW complex not only provided large surface area to improve the sensitivity of DPA detection, but also constructed ratiometric fluorescence sensors to eliminate environmental effects and instrument fluctuation. DPA was a highly efficient antenna molecule for Eu³⁺ and Tb³⁺ and transferred the energy to Eu³⁺ or Tb³⁺ to sensitize their fluorescence. The Ln/MTSNW complex were uniformly and stably dispersed in aqueous solution for DPA detection with a linear range from 15 nM to 7 μM and low detection limit of 5.2 nM for Eu/MTSNW and a linear range from 4 nM to 2.5 μM and low detection limit of 1.4 nM for Tb/MTSNW. Due to the simple preparation of Ln/MTSNW complex and low technical requirement, the ratiometric fluorescence DPA sensor based on Ln/MTSNW complex might show great potential in practical applications.

Evaluation of Real-time PCR Based on SYBR Green I Fluorescent Dye for Detection of Bacillus Anthracis Strains in Biological Samples

Introduction

The aim of the study was the application and evaluation of real-time PCRs based on the fluorescence of SYBR Green I intercalating dye for the detection of three Bacillus anthracis genes in contaminated liver and blood samples. The goals for detection were rpoB gene as a chromosomal marker, pag gene located on plasmid pXO1, and capC gene located on plasmid pXO2.

Material and Methods

Five B. anthracis strains were used for the experiments. Additionally, single strains of other species of the genus Bacillus, i.e. B. cereus, B. brevis, B. subtilis, and B. megaterium, and strains of six other species were used for evaluation of the specificity of the tests. Three SYBR Green I real-time PCRs were conducted allowing confirmation of B. anthracis in the biological samples.

Results

The observation of amplification curves in real-time PCRs enabled the detection of the chromosomally encoded rpoB gene, pag gene, and capC gene of B. anthracis. The specificity of the tests was confirmed by estimation of the melting temperature of the PCR products. The sensitivity and linearity of the reactions were determined using regression coefficients. Strains of other microbial species did not reveal real-time PCR products.

Conclusion

All real-time PCRs for the detection of B. anthracis in biological samples demonstrated a significant sensitivity and high specificity.

For the optical detection of anthrax biomarker using a luminescent rare earth-organic framework modified by rhodamine molecules: Synthesis, characterization and two sensing channels

This work was devoted to the synthesis and performance report of an optical sensing platform for dipicolinate (DPA), which was known as a biomarker for Bacillus anthracis spores. This DPA optical sensing platform (denoted as EuBTC@RB) was composed of luminescent rare earth MOF and rhodamine-derived sensing probe. Its structure was discussed and confirmed by means of XRD, IR, TGA, absorption, emission and excitation spectra. EuBTC@RB showed two sensing channels for DPA, including colorimetric sensing and ratiometric fluorescent sensing. Linear response was found for both sensing channels, with LOD value of 3.4 μM. Its sensing mechanism was discussed and confirmed as the combination of an emission turn off effect caused by energy transfer process (EuBTC → DPA pyridine) and an emission turn on effect of rhodamine molecules triggered by DPA-released protons. EuBTC@RB showed its advantage over traditional DPA optical sensing systems due to its dual sensing skills and the possibility of naked eye detection.

Naphthalimide-Based DNA-Coupled Hybrid Assembly for Sensing Dipicolinic Acid: A Biomarker for Bacillus anthracis Spores

We have designed and synthesized a novel, water-soluble naphthalimide-histidine receptor (1) with excellent fluorescent properties. Functioning of the synthesized receptor was performed through developing their DNA-receptor hybrid assembly (DRHA), which has shown significant changes in the emission profile upon interactions with dipicolinic acid (DPA), a biomarker for Bacillus anthracis spores. DRHA showed fluorescence enhancement upon binding with DPA with the characteristic of internal charge transfer. It is notable that this assembly exhibited a significant limit of detection (12 nM) toward DPA. The mechanism of sensing was fully defined using ethidium bromide (EtBr) interaction studies as well as Fourier transform infrared spectroscopic analysis, which describes the binding mode of DRHA with DPA. This assembly selectively interacts with DPA over other anions, common cellular cations, and aromatic acids in aqueous media.

In silico and in vitro evaluation of PCR-based assays for the detection of Bacillus anthracis chromosomal signature sequences

Bacillus anthracis, the causative agent of anthrax, is a zoonotic pathogen that is relatively common throughout the world and may cause life threatening diseases in animals and humans. There are many PCR-based assays in use for the detection of B. anthracis. While most of the developed assays rely on unique markers present on virulence plasmids pXO1 and pXO2, relatively few assays incorporate chromosomal DNA markers due to the close relatedness of B. anthracis to the B. cereus group strains. For the detection of chromosomal DNA, different genes have been used, such as BA813, rpoB, gyrA, plcR, S-layer, and prophage-lambda. Following a review of the literature, an in silico analysis of all signature sequences reported for identification of B. anthracis was conducted. Published primer and probe sequences were compared for specificity against 134 available Bacillus spp. genomes. Although many of the chromosomal targets evaluated are claimed to be specific to B. anthracis, cross-reactions with closely related B. cereus and B. thuringiensis strains were often observed. Of the 35 investigated PCR assays, only 4 were 100% specific for the B. anthracis chromosome. An interlaboratory ring trial among five European laboratories was then performed to evaluate six assays, including the WHO recommended procedures, using a collection of 90 Bacillus strains. Three assays performed adequately, yielding no false positive or negative results. All three assays target chromosomal markers located within the lambdaBa03 prophage region (PL3, BA5345, and BA5357). Detection limit was further assessed for one of these highly specific assays.

Use of a bacteriophage lysin to identify a novel target for antimicrobial development

We identified an essential cell wall biosynthetic enzyme in Bacillus anthracis and an inhibitor thereof to which the organism did not spontaneously evolve measurable resistance. This work is based on the exquisite binding specificity of bacteriophage-encoded cell wall-hydrolytic lysins, which have evolved to recognize critical receptors within the bacterial cell wall. Focusing on the B. anthracis-specific PlyG lysin, we first identified its unique cell wall receptor and cognate biosynthetic pathway. Within this pathway, one biosynthetic enzyme, 2-epimerase, was required for both PlyG receptor expression and bacterial growth. The 2-epimerase was used to design a small-molecule inhibitor, epimerox. Epimerox prevented growth of several Gram-positive pathogens and rescued mice challenged with lethal doses of B. anthracis. Importantly, resistance to epimerox was not detected (<10(-11) frequency) in B. anthracis and S. aureus. These results describe the use of phage lysins to identify promising lead molecules with reduced resistance potential for antimicrobial development.

Rapid focused sequencing: a multiplexed assay for simultaneous detection and strain typing of Bacillus anthracis, Francisella tularensis, and Yersinia pestis

Background

The intentional release of Bacillus anthracis in the United States in 2001 has heightened concern about the use of pathogenic microorganisms in bioterrorism attacks. Many of the deadliest bacteria, including the Class A Select Agents Bacillus anthracis, Francisella tularensis, and Yersinia pestis, are highly infectious via the pulmonary route when released in aerosolized form. Hence, rapid, sensitive, and reliable methods for detection of these biothreats and characterization of their potential impact on the exposed population are of critical importance to initiate and support rapid military, public health, and clinical responses.

Methodology/Principal Findings

We have developed microfluidic multiplexed PCR and sequencing assays based on the simultaneous interrogation of three pathogens per assay and ten loci per pathogen. Microfluidic separation of amplified fluorescently labeled fragments generated characteristic electrophoretic signatures for identification of each agent. The three sets of primers allowed significant strain typing and discrimination from non-pathogenic closely-related species and environmental background strains based on amplicon sizes alone. Furthermore, sequencing of the 10 amplicons per pathogen, termed “Rapid Focused Sequencing,” allowed an even greater degree of strain discrimination and, in some cases, can be used to determine virulence. Both amplification and sequencing assays were performed in microfluidic biochips developed for fast thermal cycling and requiring 7 µL per reaction. The 30-plex sequencing assay resulted in genotypic resolution of 84 representative strains belonging to each of the three biothreat species.

Conclusions/Significance

The microfluidic multiplexed assays allowed identification and strain differentiation of the biothreat agents Bacillus anthracis, Francisella tularensis, and Yersinia pestis and clear discrimination from closely-related species and several environmental background strains. The assays may be extended to detect a large number of pathogens, are applicable to the evaluation of both environmental and clinical samples, and have the potential to be applied in military, public health, and clinical diagnostic settings.

Multi-platform comparison of ten commercial master mixes for probe-based real-time polymerase chain reaction detection of bioterrorism threat agents for surge preparedness

The Centers for Disease Control and Prevention and United States Army Research Institute for Infectious Diseases have developed real-time PCR assays for the detection of bioterrorism threat agents. These assays all rely on a limited number of approved real-time PCR master mixes. Because the availability of these reagents is a critical element of bioterrorism preparedness, we undertook a joint national preparedness exercise to address the potential surge needs resulting from a large-scale bio-emergency. We identified 9 commercially-available potential alternatives to an existing approved master mix (LightCycler FastStart DNA Master HybProbes): the TaqMan Fast Universal PCR master mix, OmniMix HS, FAST qPCR master mix, EXPRESS qPCR SuperMix kit, QuantiFast Probe PCR kit, LightCycler FastStart DNA Master(PLUS) HybProbe, Brilliant II FAST qPCR master mix, ABsolute Fast QPCR Mix and the HotStart IT Taq master mix. The performances of these kits were evaluated by the use of real-time PCR assays for four bioterrorism threat agents: Bacillus anthracis, Brucella melitensis, Burkholderia mallei and Francisella tularensis. The master mixes were compared for target-specific detection levels, as well as consistency of results among three different real-time PCR platforms (LightCycler, SmartCycler and 7500 Fast Dx). Real-time PCR analysis revealed that all ten kits performed well for agent detection on the 7500 Fast Dx instrument; however, the QuantiFast Probe PCR kit yielded the most consistently positive results across multiple real-time PCR platforms. We report that certain combinations of commonly used master mixes and instruments are not as reliable as others at detecting low concentrations of target DNA. Furthermore, our study provides laboratories the option to select from the commercial kits we evaluated to suit their preparedness needs.

High-throughput screening of a diversity collection using biodefense category A and B priority pathogens

One of the objectives of the National Institutes of Allergy and Infectious Diseases (NIAID) Biodefense Program is to identify or develop broad-spectrum antimicrobials for use against bioterrorism pathogens and emerging infectious agents. As a part of that program, our institution has screened the 10 000-compound MyriaScreen Diversity Collection of high-purity druglike compounds against three NIAID category A and one category B priority pathogens in an effort to identify potential compound classes for further drug development. The effective use of a Clinical and Laboratory Standards Institute-based high-throughput screening (HTS) 96-well-based format allowed for the identification of 49 compounds that had in vitro activity against all four pathogens with minimum inhibitory concentration values of ≤16 µg/mL. Adaptation of the HTS process was necessary to conduct the work in higher-level containment, in this case, biosafety level 3. Examination of chemical scaffolds shared by some of the 49 compounds and assessment of available chemical databases indicates that several may represent broad-spectrum antimicrobials whose activity is based on novel mechanisms of action.

Development of aptamer beacons for rapid presumptive detection of Bacillus spores

A library of 92 DNA aptamer sequences was developed against Bacillus anthracis (nonpathogenic Sterne strain) spores and anthrose sugar immobilized on magnetic beads. The selected DNA sequences were studied for similarities and potential binding pockets between the B. anthracis spore and anthrose aptamers. Several recurring loop structures were identified and tested for their potential to act as aptamer beacons when labeled with TYE 665 dye on their 5' ends and Iowa Black quencher on their 3' ends. Of these candidate sequences, two beacons designated BAS-6F and BAS-6R emerged which gave strong fluorescence responses at high spore concentrations (greater than 30,000 spores/ml). These aptamer beacons also detect B. cereus and B. thuringiensis spores with greater fluorescence intensity, but do not strongly detect vegetative cells from an array of other bacterial species. BAS-6F and 6R are also not capable of detecting pure anthrose, thereby probably ruling that epitope out as a spore surface target for these particular beacons. While not extremely sensitive, the BAS-6F and 6R aptamer beacons are potentially valuable for rapid presumptive detection of anthrax or Bacillus spores in suspect powders or bioterrorist activity where spore concentrations are anticipated to be high. The sequence similarities of these beacons to other published Bacillus spore aptamers are also discussed.

Application of genetic marker and real-time polymerase chain reaction for discrimination between Forsythia viridissima and Forsythia suspensa

Forsythiae Fructus has been used as a herbal medicine for a fruit of Forsythia viridissima LINDLEY or Forsythia suspensa VAHL (Oleaceae). In Korea, the fruit of Forsythia viridissima is used and in China, the fruit of Forsythia suspensa is used generally. There are differences in the amount and distribution of constituents between Forsythia viridissima (FV) and Forsythia suspensa (FS). Accordingly, a discrimination of these two herbal drugs is needed. In this study, we designed FV genetic marker based on the internal transcribed spacer (ITS) sequence of nuclear ribosomal DNA that can discriminate Forsythia viridissima and Forsythia suspensa and species-specific amplification product 252 bp was confirmed. Using the real-time polymerase chain reaction (PCR) (allelic discrimination) analysis, an accurate discrimination between Forsythia viridissima and Forsythia suspensa was accomplished. Accordingly, with the use of PCR analysis based on ITS region sequence of ribosomal DNA and the real-time PCR analysis which can efficiently discriminate between Forsythia viridissima and Forsythia suspensa was developed.

The genome and variation of Bacillus anthracis

The Bacillus anthracis genome reflects its close genetic ties to Bacillus cereus and Bacillus thuringiensis but has been shaped by its own unique biology and evolutionary forces. The genome is comprised of a chromosome and two large virulence plasmids, pXO1 and pXO2. The chromosome is mostly co-linear among B. anthracis strains and even with the closest near neighbor strains. An exception to this pattern has been observed in a large inversion in an attenuated strain suggesting that chromosome co-linearity is important to the natural biology of this pathogen. In general, there are few polymorphic nucleotides among B. anthracis strains reflecting the short evolutionary time since its derivation from a B. cereus-like ancestor. The exceptions to this lack of diversity are the variable number tandem repeat (VNTR) loci that exist in genic and non genic regions of the chromosome and both plasmids. Their variation is associated with high mutability that is driven by rapid insertion and deletion of the repeats within an array. A notable example is found in the vrrC locus which is homologous to known DNA translocase genes from other bacteria.

Implications of limits of detection of various methods for Bacillus anthracis in computing risks to human health

Used for decades for biological warfare, Bacillus anthracis (category A agent) has proven to be highly stable and lethal. Quantitative risk assessment modeling requires descriptive statistics of the limit of detection to assist in defining the exposure. Furthermore, the sensitivities of various detection methods in environmental matrices are vital information for first responders. A literature review of peer-reviewed journal articles related to methods for detection of B. anthracis was undertaken. Articles focused on the development or evaluation of various detection approaches, such as PCR, real-time PCR, immunoassay, etc. Real-time PCR and PCR were the most sensitive methods for the detection of B. anthracis, with median instrument limits of detection of 430 and 440 cells/ml, respectively. There were very few peer-reviewed articles on the detection methods for B. anthracis in the environment. The most sensitive limits of detection for the environmental samples were 0.1 CFU/g for soil using PCR-enzyme-linked immunosorbent assay (ELISA), 17 CFU/liter for air using an ELISA-biochip system, 1 CFU/liter for water using cultivation, and 1 CFU/cm(2) for stainless steel fomites using cultivation. An exponential dose-response model for the inhalation of B. anthracis estimates of risk at concentrations equal to the environmental limit of detection determined the probability of death if untreated to be as high as 0.520. Though more data on the environmental limit of detection would improve the assumptions made for the risk assessment, this study's quantification of the risk posed by current limitations in the knowledge of detection methods should be considered when employing those methods in environmental monitoring and cleanup strategies.

A DNA microarray facilitates the diagnosis of Bacillus anthracis in environmental samples

AIMS

In order to improve the diagnosis of Bacillus anthracis in environmental samples, we established a DNA microarray based on the ArrayTube technology of Clondiag.

METHODS AND RESULTS

Total DNA of a bacterial colony is randomly biotinylated and hybridized to the array. The probes on the array target the virulence genes, the genomic marker gene rpoB, as well as the selective 16S rDNA sequence regions of B. anthracis, of the Bacillus cereus group and of Bacillus subtilis. Eight B. anthracis reference strains were tested and correctly identified. Among the analysed environmental Bacillus isolates, no virulent B. anthracis strain was detected.

CONCLUSIONS

This array clearly differentiates B. anthracis from members of the B. cereus group and other Bacillus species in environmental samples by chromosomal (rpoB) and plasmid markers. Additionally, recognition of B. cereus strains harbouring the toxin genes or atypical B. anthracis strains that have lost the virulence plasmids is feasible.

SIGNIFICANCE AND IMPACT OF THE STUDY

The array is applicable to the complex diagnostics for B. anthracis detection in environmental samples. Because of low costs, high security and easy handling, the microarray is applicable to routine diagnostics.

Discrimination between biothreat agents and 'near neighbor' species using a resequencing array

Timely identification of biothreat organisms from large numbers of clinical or environmental samples in potential outbreak or attack scenario is critical for effective diagnosis and treatment. This study aims to evaluate the potential of resequencing arrays for this purpose. Albeit suboptimal, this report demonstrated that respiratory pathogen microarray version 1 can identify Bacillus anthracis, Francisella tularensis, Yersinia pestis and distinguish them from benign 'near neighbor' species in a single assay. Additionally, the sequence information can discriminate strains and possibly the sources of the strains. With further development, it is possible to use resequencing microarrays for biothreat surveillance.

Gamma irradiation can be used to inactivate Bacillus anthracis spores without compromising the sensitivity of diagnostic assays

The use of Bacillus anthracis as a biological weapon in 2001 heightened awareness of the need for validated methods for the inactivation of B. anthracis spores. This study determined the gamma irradiation dose for inactivating virulent B. anthracis spores in suspension and its effects on real-time PCR and antigen detection assays. Strains representing eight genetic groups of B. anthracis were exposed to gamma radiation, and it was found that subjecting spores at a concentration of 10(7) CFU/ml to a dose of 2.5 x 10(6) rads resulted in a 6-log-unit reduction of spore viability. TaqMan real-time PCR analysis of untreated versus irradiated Ames strain (K1694) spores showed that treatment significantly enhanced the detection of B. anthracis chromosomal DNA targets but had no significant effect on the ability to detect targets on the pXO1 and pXO2 plasmids of B. anthracis. When analyzed by an enzyme-linked immunosorbent assay (ELISA), irradiation affected the detection of B. anthracis spores in a direct ELISA but had no effect on the limit of detection in a sandwich ELISA. The results of this study showed that gamma irradiation-inactivated spores can be tested by real-time PCR or sandwich ELISA without decreasing the sensitivity of either type of assay. Furthermore, the results suggest that clinical and public health laboratories which test specimens for B. anthracis could potentially incorporate gamma irradiation into sample processing protocols without compromising the sensitivity of the B. anthracis assays.

Genetic distribution of 295 Bacillus cereus group members based on adk-screening in combination with MLST (Multilocus Sequence Typing) used for validating a primer targeting a chromosomal locus in B. anthracis

The genetic distribution of 295 Bacillus cereus group members has been investigated by using a modified Multilocus Sequence Typing method (MLST). By comparing the nucleic acid sequence of the adk gene fragment, isolates of B. cereus group members most related to B. anthracis may be easily identified. The genetic distribution, with focus on the B. anthracis close neighbours, was used to evaluate a new primer set for specific identification of B. anthracis. This primer set, BA5510-1/2, targeted the putative B. anthracis specific gene BA5510. Real-time PCR using BA5510-1/2 amplified the target fragment from all B. anthracis strains tested and only two (of 289) non-B. anthracis strains analysed. This is one of the most thoroughly validated chromosomal B. anthracis markers for real-time PCR identification, in which the screened collection contained several very closely related B. anthracis strains.

High throughput screening for spores and vegetative forms of pathogenic B. anthracis by an internally controlled real-time PCR assay with automated DNA preparation

Human infections with Bacillus anthracis have become rare but in cases of intentional release, masses of samples would have to be expected. Current PCR assays for anthrax are appropriate for use in single cases, but they have not been formulated for high throughput screening. This article describes a high throughput real-time PCR for anthrax, including automated sample preparation without the need for pre-culturing of samples. The assay detects single copies of target gene. An internal control monitors the whole assay including sample preparation. The limit of detection in blood was 1,066 (95%CI, 741-1,739) copies/ml, corresponding to 4.4-32.3 organisms/ml. Using spore preparations, 20 colony-forming units (CFU) per sample could be detected reliably (0.8 CFU per PCR). The extraction procedures depleted viable spores from solution by factors of 10,000 (automated procedure) and >100,000 (conventional column procedure). One hundred and ten clinical and environmental specimens were retested, 50 of them sampled during a period of heightened anthrax awareness in 2001. A widely used assay yielded two false positive results (cross-reaction with B. cereus), while the new assay tested all samples negative. The internal control operated stable in all clinical samples. The assay is capable of testing for anthrax in the high throughput mode.

Comparison of PCR, culture and microscopy of blood smears for the diagnosis of anthrax in sheep and cattle

AIMS

To compare microscopy, culture and PCR for the diagnosis of anthrax in blood samples from sheep and cattle.

METHODS AND RESULTS

Blood samples were stored at room temperature and at 37 degrees C after receipt, over a period of 15-17 days. Aliquots were plated onto blood agar and blood smears were prepared. Following microscopic examination, DNA was extracted from blood smears and subjected to a multiplex PCR assay targeting the Ba813, cap and lef markers.

CONCLUSIONS

PCR provided the most reliable means for the detection of Bacillus anthracis in deteriorating blood samples (15-17 days) and was also successful in diagnosing anthrax in blood smears that had been stored for 6 years and a blood sample which had been stored for 18 months at -20 degrees C. While less successful than PCR, culture for B. anthracis on 7% sheep blood agar was typically more reliable (2-17 days) than the examination of blood smears (2-6 days) for encapsulated bacilli.

SIGNIFICANCE AND IMPACT OF THE STUDY

This work demonstrated the superiority of PCR for the diagnosis of anthrax from blood smear scrapings, particularly when microscopy is unreliable.

Requirements for the Development of Bacillus Anthracis Spore Reference Materials Used to Test Detection Systems

Bacillus anthracis spores have been used as biological weapons and the possibility of their further use requires surveillance systems that can accurately and reliably detect their presence in the environment. These systems must collect samples from a variety of matrices, process the samples, and detect the spores. The processing of the sample may include removal of inhibitors, concentration of the target, and extraction of the target in a form suitable for detection. Suitable reference materials will allow the testing of each of these steps to determine the sensitivity and specificity of the detection systems. The development of uniform and well-characterized reference materials will allow the comparison of different devices and technologies as well as assure the continued performance of detection systems. This paper discusses the special requirements of reference materials for Bacillus anthracis spores that could be used for testing detection systems. The detection of Bacillus anthracis spores is based on recognition of specific characteristics (markers) on either the spore surface or in the nucleic acids (DNA). We have reviewed the specific markers and their relevance to characterization of reference materials. We have also included the approach for the characterization of candidate reference materials that we are developing at the NIST laboratories. Additional applications of spore reference materials would include testing sporicidal treatments, techniques for sampling the environment, and remediation of spore-contaminated environments.

The Bacillus anthracis chromosome contains four conserved, excision-proficient, putative prophages

Background

Bacillus anthracis is considered to be a recently emerged clone within the Bacillus cereus sensu lato group. The B. anthracis genome sequence contains four putative lambdoid prophages. We undertook this study in order to understand whether the four prophages are unique to B. anthracis and whether they produce active phages.

Results

More than 300 geographically and temporally divergent isolates of B. anthracis and its near neighbors were screened by PCR for the presence of specific DNA sequences from each prophage region. Every isolate of B. anthracis screened by PCR was found to produce all four phage-specific amplicons whereas none of the non-B. anthracis isolates, produced more than one phage-specific amplicon. Excision of prophages could be detected by a PCR based assay for attP sites on extra-chromosomal phage circles and for attB sites on phage-excised chromosomes. SYBR-green real-time PCR assays indicated that prophage excision occurs at very low frequencies (2 × 10^-5 - 8 × 10^-8/cell). Induction with mitomycin C increased the frequency of excision of one of the prophages by approximately 250 fold. All four prophages appear to be defective since, mitomycin C induced culture did not release any viable phage particle or lyse the cells or reveal any phage particle under electron microscopic examination.

Conclusion

The retention of all four putative prophage regions across all tested strains of B. anthracis is further evidence of the very recent emergence of this lineage and the prophage regions may be useful for differentiating the B. anthracis chromosome from that of its neighbors. All four prophages can excise at low frequencies, but are apparently defective in phage production.

Bacillus anthracis: toxicology, epidemiology and current rapid-detection methods

B. anthracis, the causative agent for anthrax, has been well studied for over 150 years. Due to the genetic similarities among various Bacillus species, as well as its existence in both a spore form and a vegetative state, the detection and specific identification of B. anthracis have been proven to require complex techniques and/or laborious methods. With the heightened interest in the organism as a potential biological threat agent, a large number of interesting detection technologies have recently been developed, including methods involving immunological and nucleic acid-based assay formats. The technologies range from culture-based methods to portable Total Analysis Systems based on real-time PCR. This review with 170 references provides a brief background on the toxicology and epidemiology of B. anthracis, discusses challenges associated with its detection related to genetic similarities to other species, and reviews immunological and, with greater emphasis, nucleic acid-based detection systems.