The Nul subunit of bacteriophage lambda terminase binds to specific sites in cos DNA

Viral Small Terminase: A Divergent Structural Framework for a Conserved Biological Function

The genome packaging motor of bacteriophages and herpesviruses is built by two terminase subunits, known as large (TerL) and small (TerS), both essential for viral genome packaging. TerL structure, composition, and assembly to an empty capsid, as well as the mechanisms of ATP-dependent DNA packaging, have been studied in depth, shedding light on the chemo-mechanical coupling between ATP hydrolysis and DNA translocation. Instead, significantly less is known about the small terminase subunit, TerS, which is dispensable or even inhibitory in vitro, but essential in vivo. By taking advantage of the recent revolution in cryo-electron microscopy (cryo-EM) and building upon a wealth of crystallographic structures of phage TerSs, in this review, we take an inventory of known TerSs studied to date. Our analysis suggests that TerS evolved and diversified into a flexible molecular framework that can conserve biological function with minimal sequence and quaternary structure conservation to fit different packaging strategies and environmental conditions.

Biophysical analysis of Pseudomonas-phage PaP3 small terminase suggests a mechanism for sequence-specific DNA-binding by lateral interdigitation

The genome packaging motor of tailed bacteriophages and herpesviruses is a powerful nanomachine built by several copies of a large (TerL) and a small (TerS) terminase subunit. The motor assembles transiently at the portal vertex of an empty precursor capsid (or procapsid) to power genome encapsidation. Terminase subunits have been studied in-depth, especially in classical bacteriophages that infect Escherichia coli or Salmonella, yet, less is known about the packaging motor of Pseudomonas-phages that have increasing biomedical relevance. Here, we investigated the small terminase subunit from three Podoviridae phages that infect Pseudomonas aeruginosa. We found TerS is polymorphic in solution but assembles into a nonamer in its high-affinity heparin-binding conformation. The atomic structure of Pseudomonas phage PaP3 TerS, the first complete structure for a TerS from a cos phage, reveals nine helix-turn-helix (HTH) motifs asymmetrically arranged around a β-stranded channel, too narrow to accommodate DNA. PaP3 TerS binds DNA in a sequence-specific manner in vitro. X-ray scattering and molecular modeling suggest TerS adopts an open conformation in solution, characterized by dynamic HTHs that move around an oligomerization core, generating discrete binding crevices for DNA. We propose a model for sequence-specific recognition of packaging initiation sites by lateral interdigitation of DNA.

The large terminase DNA packaging motor grips DNA with its ATPase domain for cleavage by the flexible nuclease domain

Many viruses use a powerful terminase motor to pump their genome inside an empty procapsid shell during virus maturation. The large terminase (TerL) protein contains both enzymatic activities necessary for packaging in such viruses: the adenosine triphosphatase (ATPase) that powers DNA translocation and an endonuclease that cleaves the concatemeric genome at both initiation and completion of genome packaging. However, how TerL binds DNA during translocation and cleavage remains mysterious. Here we investigate DNA binding and cleavage using TerL from the thermophilic phage P74-26. We report the structure of the P74-26 TerL nuclease domain, which allows us to model DNA binding in the nuclease active site. We screened a large panel of TerL variants for defects in binding and DNA cleavage, revealing that the ATPase domain is the primary site for DNA binding, and is required for nuclease activity. The nuclease domain is dispensable for DNA binding but residues lining the active site guide DNA for cleavage. Kinetic analysis of DNA cleavage suggests flexible tethering of the nuclease domains during DNA cleavage. We propose that interactions with the procapsid during DNA translocation conformationally restrict the nuclease domain, inhibiting cleavage; TerL release from the capsid upon completion of packaging unlocks the nuclease domains to cleave DNA.

DNA Topology and the Initiation of Virus DNA Packaging

During progeny assembly, viruses selectively package virion genomes from a nucleic acid pool that includes host nucleic acids. For large dsDNA viruses, including tailed bacteriophages and herpesviruses, immature viral DNA is recognized and translocated into a preformed icosahedral shell, the prohead. Recognition involves specific interactions between the viral packaging enzyme, terminase, and viral DNA recognition sites. Generally, viral DNA is recognized by terminase’s small subunit (TerS). The large terminase subunit (TerL) contains translocation ATPase and endonuclease domains. In phage lambda, TerS binds a sequence repeated three times in cosB, the recognition site. TerS binding to cosB positions TerL to cut the concatemeric DNA at the adjacent nicking site, cosN. TerL introduces staggered nicks in cosN, generating twelve bp cohesive ends. Terminase separates the cohesive ends and remains bound to the cosB-containing end, in a nucleoprotein structure called Complex I. Complex I docks on the prohead’s portal vertex and translocation ensues. DNA topology plays a role in the TerS^λ-cosB^λ interaction. Here we show that a site, I2, located between cosN and cosB, is critically important for an early DNA packaging step. I2 contains a complex static bend. I2 mutations block DNA packaging. I2 mutant DNA is cut by terminase at cosN in vitro, but in vivo, no cos cleavage is detected, nor is there evidence for Complex I. Models for what packaging step might be blocked by I2 mutations are presented.

Novel DNA packaging recognition in the unusual bacteriophage N15

Phage lambda's cosB packaging recognition site is tripartite, consisting of 3 TerS binding sites, called R sequences. TerS binding to the critical R3 site positions the TerL endonuclease for nicking cosN to generate cohesive ends. The N15 cos (cos(N15)) is closely related to cos(λ), but whereas the cosB(N15) subsite has R3, it lacks the R2 and R1 sites and the IHF binding site of cosB(λ). A bioinformatic study of N15-like phages indicates that cosB(N15) also has an accessory, remote rR2 site, which is proposed to increase packaging efficiency, like R2 and R1 of lambda. N15 plus five prophages all have the rR2 sequence, which is located in the TerS-encoding 1 gene, approximately 200 bp distal to R3. An additional set of four highly related prophages, exemplified by Monarch, has R3 sequence, but also has R2 and R1 sequences characteristic of cosB-λ. The DNA binding domain of TerS-N15 is a dimer.

Bacteriophage lambda: Early pioneer and still relevant

Molecular genetic research on bacteriophage lambda carried out during its golden age from the mid-1950s to mid-1980s was critically important in the attainment of our current understanding of the sophisticated and complex mechanisms by which the expression of genes is controlled, of DNA virus assembly and of the molecular nature of lysogeny. The development of molecular cloning techniques, ironically instigated largely by phage lambda researchers, allowed many phage workers to switch their efforts to other biological systems. Nonetheless, since that time the ongoing study of lambda and its relatives has continued to give important new insights. In this review we give some relevant early history and describe recent developments in understanding the molecular biology of lambda's life cycle.

Function and horizontal transfer of the small terminase subunit of the tailed bacteriophage Sf6 DNA packaging nanomotor

Bacteriophage Sf6 DNA packaging series initiate at many locations across a 2kbp region. Our in vivo studies show that Sf6 small terminase subunit (TerS) protein recognizes a specific packaging (pac) site near the center of this region, that this site lies within the portion of the Sf6 gene that encodes the DNA-binding domain of TerS protein, that this domain of the TerS protein is responsible for the imprecision in Sf6 packaging initiation, and that the DNA-binding domain of TerS must be covalently attached to the domain that interacts with the rest of the packaging motor. The TerS DNA-binding domain is self-contained in that it apparently does not interact closely with the rest of the motor and it binds to a recognition site that lies within the DNA that encodes the domain. This arrangement has allowed the horizontal exchange of terS genes among phages to be very successful.

The bacteriophage DNA packaging motor

An ATP-powered DNA translocation machine encapsidates the viral genome in the large dsDNA bacteriophages. The essential components include the empty shell, prohead, and the packaging enzyme, terminase. During translocation, terminase is docked on the prohead's portal protein. The translocation ATPase and the concatemer-cutting endonuclease reside in terminase. Remarkably, terminases, portal proteins, and shells of tailed bacteriophages and herpes viruses show conserved features. These DNA viruses may have descended from a common ancestor. Terminase's ATPase consists of a classic nucleotide binding fold, most closely resembling that of monomeric helicases. Intriguing models have been proposed for the mechanism of dsDNA translocation, invoking ATP hydrolysis-driven conformational changes of portal or terminase powering DNA motion. Single-molecule studies show that the packaging motor is fast and powerful. Recent advances permit experiments that can critically test the packaging models. The viral genome translocation mechanism is of general interest, given the parallels between terminases, helicases, and other motor proteins.

Assembly architecture and DNA binding of the bacteriophage P22 terminase small subunit

Morphogenesis of bacteriophage P22 involves the packaging of double-stranded DNA into a preassembled procapsid. DNA is translocated by a powerful virally encoded molecular motor called terminase, which comprises large (gp2, 499 residues) and small (gp3, 162 residues) subunits. While gp2 contains the phosphohydrolase and endonuclease activities of terminase, the function of gp3 may be to regulate specific and nonspecific modes of DNA recognition as well as the enzymatic activities of gp2. Electron microscopy shows that wild-type gp3 self-assembles into a stable and monodisperse nonameric ring. A three-dimensional reconstruction at 18 A resolution provides the first glimpse of P22 terminase architecture and implies two distinct modes of interaction with DNA-involving a central channel of 20 A diameter and radial spikes separated by 34 A. Electromobility shift assays indicate that the gp3 ring binds double-stranded DNA nonspecifically in vitro via electrostatic interactions between the positively charged C-terminus of gp3 (residues 143-152) and phosphates of the DNA backbone. Raman spectra show that nonameric rings formed by subunits truncated at residue 142 retain the subunit fold despite the loss of DNA-binding activity. Difference density maps between gp3 rings containing full-length and C-terminally truncated subunits are consistent with localization of residues 143-152 along the central channel of the nonameric ring. The results suggest a plausible molecular mechanism for gp3 function in DNA recognition and translocation.

Subunit conformations and assembly states of a DNA-translocating motor: the terminase of bacteriophage P22

Bacteriophage P22, a podovirus infecting strains of Salmonella typhimurium, packages a 42-kbp genome using a headful mechanism. DNA translocation is accomplished by the phage terminase, a powerful molecular motor consisting of large and small subunits. Although many of the structural proteins of the P22 virion have been well characterized, little is known about the terminase subunits and their molecular mechanism of DNA translocation. We report here structural and assembly properties of ectopically expressed and highly purified terminase large and small subunits. The large subunit (gp2), which contains the nuclease and ATPase activities of terminase, exists as a stable monomer with an alpha/beta fold. The small subunit (gp3), which recognizes DNA for packaging and may regulate gp2 activity, exhibits a highly alpha-helical secondary structure and self-associates to form a stable oligomeric ring in solution. For wild-type gp3, the ring contains nine subunits, as demonstrated by hydrodynamic measurements, electron microscopy, and native mass spectrometry. We have also characterized a gp3 mutant (Ala 112-->Thr) that forms a 10-subunit ring, despite a subunit fold indistinguishable from wild type. Both the nonameric and decameric gp3 rings exhibit nonspecific DNA-binding activity, and gp2 is able to bind strongly to the DNA/gp3 complex but not to DNA alone. We propose a scheme for the roles of P22 terminase large and small subunits in the recruitment and packaging of viral DNA and discuss the model in relation to proposals for terminase-driven DNA translocation in other phages.

The DNA maturation domain of gpA, the DNA packaging motor protein of bacteriophage lambda, contains an ATPase site associated with endonuclease activity

Terminase enzymes are common to double-stranded DNA (dsDNA) viruses and are responsible for packaging viral DNA into the confines of an empty capsid shell. In bacteriophage lambda the catalytic terminase subunit is gpA, which is responsible for maturation of the genome end prior to packaging and subsequent translocation of the matured DNA into the capsid. DNA packaging requires an ATPase catalytic site situated in the N terminus of the protein. A second ATPase catalytic site associated with the DNA maturation activities of the protein has been proposed; however, direct demonstration of this putative second site is lacking. Here we describe biochemical studies that define protease-resistant peptides of gpA and expression of these putative domains in Escherichia coli. Biochemical characterization of gpA-DeltaN179, a construct in which the N-terminal 179 residues of gpA have been deleted, indicates that this protein encompasses the DNA maturation domain of gpA. The construct is folded, soluble and possesses an ATP-dependent nuclease activity. Moreover, the construct binds and hydrolyzes ATP despite the fact that the DNA packaging ATPase site in the N terminus of gpA has been deleted. Mutation of lysine 497, which alters the conserved lysine in a predicted Walker A "P-loop" sequence, does not affect ATP binding but severely impairs ATP hydrolysis. Further, this mutation abrogates the ATP-dependent nuclease activity of the protein. These studies provide direct evidence for the elusive nucleotide-binding site in gpA that is directly associated with the DNA maturation activity of the protein. The implications of these results with respect to the two roles of the terminase holoenzyme, DNA maturation and DNA packaging, are discussed.

Assembly of bacteriophage lambda terminase into a viral DNA maturation and packaging machine

Terminase enzymes are common to complex double-stranded DNA viruses and function to package viral DNA into the capsid. We recently demonstrated that the bacteriophage lambda terminase gpA and gpNu1 proteins assemble into a stable heterotrimer with a molar ratio gpA1/gpNu1(2). This terminase protomer possesses DNA maturation and packaging activities that are dependent on the E. coli integration host factor protein (IHF). Here, we show that the protomer further assembles into a homogeneous tetramer of protomers of composition (gpA1/gpNu1(2))4. Electron microscopy shows that the tetramer forms a ring structure large enough to encircle duplex DNA. In contrast to the heterotrimer, the ring tetramer can mature and package viral DNA in the absence of IHF. We propose that IHF induced bending of viral DNA facilitates the assembly of four terminase protomers into a ring tetramer that represents the catalytically competent DNA maturation and packaging complex in vivo. This work provides, for the first time, insight into the functional assembly state of a viral DNA packaging motor.

Bacteriophage lambda gpNu1 and Escherichia coli IHF proteins cooperatively bind and bend viral DNA: implications for the assembly of a genome-packaging motor

Terminase enzymes are common to both prokaryotic and eukaryotic double-stranded DNA viruses and are responsible for packaging viral DNA into the confines of an empty procapsid shell. In all known cases, the holoenzymes are heteroligomers composed of a large subunit that possesses the catalytic activities required for genome packaging and a small subunit that is responsible for specific recognition of viral DNA. In bacteriophage lambda, the DNA recognition protein is gpNu1. The gpNu1 subunit interacts with multiple recognition elements within cos, the packaging initiation site in viral DNA, to site-specifically assemble the packaging machinery. Motor assembly is modulated by the Escherichia coli integration host factor protein (IHF), which binds to a consensus sequence also located within cos. On the basis of a variety of biochemical data and the recently solved NMR structure of the DNA binding domain of gpNu1, we proposed a novel DNA binding mode that predicts significant bending of duplex DNA by gpNu1 (de Beer et al. (2002) Mol. Cell 9, 981-991). We further proposed that gpNu1 and IHF cooperatively bind and bend viral DNA to regulate the assembly of the packaging motor. Here, we characterize cooperative gpNu1 and IHF binding to the cos site in lambda DNA using a quantitative electrophoretic mobility shift (EMS) assay. These studies provide direct experimental support for the long presumed cooperative assembly of gpNu1 and IHF at the cos sequence of lambda DNA. Further, circular permutation experiments demonstrate that the viral and host proteins each introduce a strong bend in cos-containing DNA, but not nonspecific DNA substrates. Thus, specific recognition of viral DNA by the packaging apparatus is mediated by both DNA sequence information and by structural alteration of the duplex. The relevance of these results with respect to the assembly of a viral DNA-packaging motor is discussed.

A critical coiled coil motif in the small terminase, gp16, from bacteriophage T4: insights into DNA packaging initiation and assembly of packaging motor

Double-stranded DNA packaging in bacteriophages is driven by one of the most powerful force-generating molecular motors reported to date. The phage T4 motor is composed of the small terminase protein, gpl6 (18kDa), the large terminase protein, gp17 (70kDa), and the dodecameric portal protein gp20 (61kDa). gp16, which exists as an oligomer in solution, is involved in the recognition of the viral DNA substrate, the very first step in the DNA packaging pathway, and stimulates the ATPase and packaging activities associated with gp17. Sequence analyses using COILS2 revealed the presence of coiled coil motifs (CCMs) in gp16. Sixteen T4-family and numerous phage small terminases show CCMs in the corresponding region of the protein, suggesting a common structural and functional theme. Biochemical properties such as reversible thermal denaturation and analytical gel filtration data suggest that the central CCM-1 is critical for oligomerization of gp16. Mutations in CCM-1 that change the hydrophobicity of key residues, or pH 6.0, destabilized coiled coil interactions, resulting in a loss of gp16 oligomerization. The gp16 oligomers are in a dynamic equilibrium with lower M(r) intermediate species and monomer. Monomeric gp16 is unable to stimulate gp17-ATPase, an activity essential for DNA packaging, while conversion back into oligomeric form restored the activity. These data for the first time defined a CCM that is critical for structure and function of the small terminase. We postulate a packaging model in which the gp16 CCM is implicated in the regulation of packaging initiation and assembly of a supramolecular DNA packaging machine on the viral concatemer.

Self-association properties of the bacteriophage lambda terminase holoenzyme: implications for the DNA packaging motor

Terminases are enzymes common to complex double-stranded DNA viruses and are required for packaging of viral DNA into a protective capsid. Bacteriophage lambda terminase holoenzyme is a hetero-oligomer composed of the A and Nu1 lambda gene products; however, the self-association properties of the holoenzyme have not been investigated systematically. Here, we report the results of sedimentation velocity, sedimentation equilibrium, and gel-filtration experiments studying the self-association properties of the holoenzyme. We find that purified, recombinant lambda terminase forms a homogeneous, heterotrimeric structure, consisting of one gpA molecule associated with two gpNu1 molecules (114.2 kDa). We further show that lambda terminase adopts a heterogeneous mixture of higher-order structures, with an average molecular mass of 528(+/-34) kDa. Both the heterotrimer and the higher-order species possess site-specific cos cleavage activity, as well as DNA packaging activity; however, the heterotrimer is dependent upon Escherichia coli integration host factor (IHF) for these activities. Furthermore, the ATPase activity of the higher-order species is approximately 1000-fold greater than that of the heterotrimer. These data suggest that IHF bending of the duplex at the cos site in viral DNA promotes the assembly of the heterotrimer into a biologically active, higher-order packaging motor. We propose that a single, higher-order hetero-oligomer of gpA and gpNu1 functions throughout lambda development.

Initial cos cleavage of bacteriophage lambda concatemers requires proheads and gpFI in vivo

The development of bacteriophage lambda and double-stranded DNA viruses in general involves the convergence of two separate pathways: DNA replication and head assembly. Clearly, packaging will proceed only if an empty capsid shell, the prohead, is present to receive the DNA, but genetic evidence suggests that proheads play another role in the packaging process. For example, lambda phages with an amber mutation in any head gene or in FI, the gene encoding the accessory packaging protein gpFI, are able to produce normal amounts of DNA concatemers but they are not cut, or matured, into unit length chromosomes for packaging. Similar observations have been made for herpes simplex 1 virus. In the case of lambda, a negative model proposes that in the amber phages, unassembled capsid components are inhibitory to maturation, and a positive model suggests that assembled proheads are required for cutting. We tested the negative model by using a deletion mutant devoid of all prohead genes and FI in an in vivo cos cleavage assay; in this deleted phage, the cohesive ends were not cut. When lambda proheads and gpFI were provided in vivo via a second prophage, cutting was restored, and gpFI was required, results that support the positive model. Phage 21 is a sister phage of lambda, and although its capsid proteins share approximately 60% residue identity with lambda's, phage 21 proheads did not restore cutting, even when provided with the accessory protein gpFI. Models for the role of proheads and gpFI in cos cutting are discussed.

Insights into specific DNA recognition during the assembly of a viral genome packaging machine

Terminase enzymes mediate genome "packaging" during the reproduction of DNA viruses. In lambda, the gpNu1 subunit guides site-specific assembly of terminase onto DNA. The structure of the dimeric DNA binding domain of gpNu1 was solved using nuclear magnetic resonance spectroscopy. Its fold contains a unique winged helix-turn-helix (wHTH) motif within a novel scaffold. Surprisingly, a predicted P loop ATP binding motif is in fact the wing of the DNA binding motif. Structural and genetic analysis has identified determinants of DNA recognition specificity within the wHTH motif and the DNA recognition sequence. The structure reveals an unexpected DNA binding mode and provides a mechanistic basis for the concerted action of gpNu1 and Escherichia coli integration host factor during assembly of the packaging machinery.

Alterations of the portal protein, gpB, of bacteriophage lambda suppress mutations in cosQ, the site required for termination of DNA packaging

The cosQ site of bacteriophage lambda is required for DNA packaging termination. Previous studies have shown that cosQ mutations can be suppressed in three ways: by a local suppressor within cosQ, an increase in the length of the lambda chromosome, and missense mutations affecting the prohead's portal protein, gpB. In the present work, revertants of a set of lethal cosQ mutants were screened for suppressors. Seven new cosQ suppressors affected gene B, which encodes the portal protein of the prohead. All seven were allele-nonspecific suppressors of cosQ mutations. Experiments with several phages having two cosQ suppressors showed that the suppression effects were additive. Furthermore, these double suppressors had minimal effects on the growth of cosQ(+) phages. These trans-acting suppressors affecting the portal protein are proposed to allow the mutant cosQ site to be more efficiently recognized, due to the slowing of the rate of translocation.

The functional asymmetry of cosN, the nicking site for bacteriophage lambda DNA packaging, is dependent on the terminase binding site, cosB

cosN is the site at which terminase, the DNA packaging enzyme of phage lambda, introduces staggered nicks into viral concatemeric DNA to initiate genome packaging. Although the nick positions and many of the base pairs of cosN show 2-fold rotational symmetry, cosN is functionally asymmetric. That is, the cosN G2C mutation in the left half-site (cosNL) causes a strong virus growth defect whereas the symmetrically disposed cosN C11G mutation in the right half-site (cosNR) does not affect virus growth. The experiments reported here test the proposal that the genetic asymmetry of cosN results from terminase interactions with cosB, a binding site to the right of cosN. In the presence of cosB, the left half-site mutation, cosN G2C, strongly affected the cos cleavage reaction, while the symmetric right half-site mutation, cosN C11G, had little effect. In the absence of cosB, the two mutations moderately reduced the rate of cos cleavage by the same amount. The results indicated that the functional asymmetry of cosNdepends on the presence of cosB. A model is discussed in which terminase-cosN interactions in the nicking complex are assisted by anchoring of terminase to cosB.

Defining cosQ, the site required for termination of bacteriophage lambda DNA packaging

Bacteriophage lambda is a double-stranded DNA virus that processes concatemeric DNA into virion chromosomes by cutting at specific recognition sites termed cos. A cos is composed of three subsites: cosN, the nicking site; cosB, required for packaging initiation; and cosQ, required for termination of chromosome packaging. During packaging termination, nicking of the bottom strand of cosN depends on cosQ, suggesting that cosQ is needed to deliver terminase to the bottom strand of cosN to carry out nicking. In the present work, saturation mutagenesis showed that a 7-bp segment comprises cosQ. A proposal that cosQ function requires an optimal sequence match between cosQ and cosNR, the right cosN half-site, was tested by constructing double cosQ mutants; the behavior of the double mutants was inconsistent with the proposal. Substitutions in the 17-bp region between cosQ and cosN resulted in no major defects in chromosome packaging. Insertional mutagenesis indicated that proper spacing between cosQ and cosN is required. The lethality of integral helical insertions eliminated a model in which DNA looping enables cosQ to deliver a gpA protomer for nicking at cosN. The 7 bp of cosQ coincide exactly with the recognition sequence for the Escherichia coli restriction endonuclease, EcoO109I.

Endonuclease and helicase activities of bacteriophage lambda terminase: changing nearby residue 515 restores activity to the gpA K497D mutant enzyme

Terminase, the DNA packaging enzyme of bacteriophage lambda, is a heteromultimer of gpNu1 and gpA subunits. In an earlier investigation, a lethal mutation changing gpA residue 497 from lysine to aspartic acid (K497D) was found to cause a mild change in the high-affinity ATPase that resides in gpA and a severe defect in the endonuclease activity of terminase. The K497D terminase efficiently sponsored packaging of mature lambda DNA into proheads. In the present work, K497D terminase was found to have a severe defect in the cohesive end separation, or helicase, activity. Plaque-forming pseudorevertants of lambda A K497D were found to carry mutations in A that suppressed the lethality of the A K497D mutation. The two suppressor mutations identified, A E515G and A E515K, affected residue 515, which is located near the putative P-loop of gpA. A codon substitution study of codon 515 showed that hydrophobic and basic residues suppress the K497D defect, but hydrophilic and acidic residues do not. The E515G change was demonstrated to reverse the endonuclease and helicase defects caused by the K497D change. Moreover, the gpA K497D E515G enzyme was found to have kinetic constants for the high-affinity ATPase center similar to those of the wild type enzyme, and the endonuclease activity of the K497D E515G enzyme was stimulated by ATP to an extent similar to the ATP stimulation of the endonuclease activity of the wild type enzyme.

A mutation correcting the DNA interaction defects of a mutant phage lambda terminase, gpNu1 K35A terminase

Terminase, the DNA packaging enzyme of bacteriophage lambda, is a heteromultimer composed of gpNu1 (181 aa) and gpA (641 aa) subunits, encoded by the lambda Nu1 and A genes, respectively. Similarity between the deduced amino acid sequences of gpNu1 and gpA and the nucleotide binding site consensus sequence suggests that each terminase subunit has an ATP reactive center. Terminase has been shown to have two distinct ATPase activities. The gpNu1 subunit has a low-affinity ATPase stimulated by nonspecific DNA and gpA has a high-affinity ATPase. In previous work, a mutant terminase, gpNu1 K35A holoterminase, had a mild defect in interactions with DNA, such that twofold increased DNA concentrations were required both for full stimulation of the low-affinity ATPase and for saturation of the cos cleavage reaction. In addition, the gpNu1 K35A terminase exhibited a post-cleavage defect in DNA packaging that accounted for the lethality of the Nu1 K35A mutation [Y. Hwang and M. Feiss (1997) Virology 231, 218-230]. In the work reported here, a mutation in the turn of the putative helix-turn-helix DNA binding domain has been isolated as a suppressor of the gpNu1 K35A change. This suppressor mutation causes the change A14V in gpNu1. A14V reverses the DNA-binding defects of gpNu1 K35A terminase, both for stimulation of the low-affinity ATPase and for saturation of the cos cleavage defect. A14V suppresses the post-cleavage DNA packaging defect caused by the gpNu1 K35A change.

Kinetic characterization of the GTPase activity of phage lambda terminase: evidence for communication between the two "NTPase" catalytic sites of the enzyme

The terminase enzyme from bacteriophage lambda is responsible for the insertion of viral DNA into the confined space within the capsid. The enzyme is composed of the virally encoded proteins gpA (73.3 kDa) and gpNu1 (20.4 kDa) isolated as a gpA(1).gpNu1(2) holoenzyme complex. Lambda terminase possesses a site-specific nuclease activity, an ATP-dependent DNA strand-separation activity, and an ATPase activity that must work in concert to effect genome packaging. We have previously characterized the ATPase activity of the holoenzyme and have identified catalytic active sites in each enzyme subunit [Tomka and Catalano (1993) Biochemistry 32, 11992-11997; Hwang et al. (1996) Biochemistry 35, 2796-2803]. We have noted that GTP stimulates the ATPase activity of the enzyme, and terminase-mediated GTP hydrolysis has been observed. The studies presented here describe a kinetic analysis of the GTPase activity of lambda terminase. GTP hydrolysis by the enzyme requires divalent metal, is optimal at alkaline pH, and is strongly inhibited by salt. Interestingly, while GTP can bind to the enzyme in the absence of DNA, GTP hydrolysis is strictly dependent on the presence of polynucleotide. Unlike ATP hydrolysis that occurs at both subunits of the holoenzyme, a single catalytic site is observed in the steady-state kinetic analysis of GTPase activity (k(cat) approximately 37 min(-)(1); K(m) approximately 500 microM). Moreover, while GTP stimulates ATP hydrolysis (apparent K(D) approximately 135 microM for GTP binding), all of the adenosine nucleotides examined strongly inhibit the GTPase activity of the enzyme. The data presented here suggest that the two "NTPase" catalytic sites in terminase holoenzyme communicate, and we propose a model describing allosteric interactions between the two sites. The biological significance of this interaction with respect to the assembly and disassembly of the multiple nucleoprotein packaging complexes required for virus assembly is discussed.

Cloning, expression, and characterization of a DNA binding domain of gpNu1, a phage lambda DNA packaging protein

Terminase is an enzyme from bacteriophage lambda that is required for insertion of the viral genome into an empty pro-capsid. This enzyme is composed of the viral proteins gpNu1 (20.4 kDa) and gpA (73.3 kDa) in a holoenzyme complex. Current models for terminase assembly onto DNA suggest that gpNu1 binds to three repeating elements within a region of the lambda genome known as cosB which, in turn, stimulates the assembly of a gpA dimer at the cosN subsite. This prenicking complex is the first of several stable nucleoprotein intermediates required for DNA packaging. We have noted a hydrophobic region within the primary amino acid sequence of the terminase gpNu1 subunit and hypothesized that this region constitutes a protein-protein interaction domain required for cooperative assembly at cosB and that is also responsible for the observed aggregation behavior of the isolated protein. We therefore constructed a mutant of gpNu1 in which this hydrophobic "domain" has been deleted in order to test these hypotheses. The deletion mutant protein, gpNu1DeltaK, is fully soluble and, unlike full-length protein, shows no tendency toward aggregation; However, the protein is a dimer under all experimental conditions examined as determined by gel permeation and sedimentation equilibrium analysis. The truncated protein is folded with evidence of secondary and tertiary structural elements by circular dichroism and NMR spectroscopy. While physical and biological assays demonstrate that gpNu1DeltaK does not interact with the terminase gpA subunit, the deletion mutant binds with specificity to cos-containing DNA. We have thus constructed a deletion mutant of the phage lambda terminase gpNu1 subunit which constitutes a highly soluble DNA binding domain of the protein. We further propose that the hydrophobic amino acids found between Lys100 and Pro141 define a self-association domain that is required for the assembly of stable nucleoprotein packaging complexes and that the C-terminal tail of the protein defines a distinct gpA-binding site that is responsible for terminase holoenzyme formation.

Mutations that extend the specificity of the endonuclease activity of lambda terminase

Terminase, an enzyme encoded by the Nu1 and A genes of bacteriophage lambda, is crucial for packaging concatemeric DNA into virions. cosN, a 22-bp segment, is the site on the virus chromosome where terminase introduces staggered nicks to cut the concatemer to generate unit-length virion chromosomes. Although cosN is rotationally symmetric, mutations in cosN have asymmetric effects. The cosN G2C mutation (a G-to-C change at position 2) in the left half of cosN reduces the phage yield 10-fold, whereas the symmetric mutation cosN C11G, in the right half of cosN, does not affect the burst size. The reduction in phage yield caused by cosN G2C is correlated with a defect in cos cleavage. Three suppressors of the cosN G2C mutation, A-E515G, A-N509K, and A-R504C, have been isolated that restore the yield of lambda cosN G2C to the wild-type level. The suppressors are missense mutations that alter amino acids located near an ATPase domain of gpA. lambda A-E515G, A-N509K, and A-R504C phages, which are cosN+, also had wild-type burst sizes. In vitro cos cleavage experiments on cosN G2C C11G DNA showed that the rate of cleavage for A-E515G terminase is three- to fourfold higher than for wild-type terminase. The A-E515G mutation changes residue 515 of gpA from glutamic acid to glycine. Uncharged polar and hydrophobic residues at position 515 suppressed the growth defect of lambda cosN G2C C11G. In contrast, basic (K, R) and acidic (E, D) residues at position 515 failed to suppress the growth defect of lambda cosN G2C C11G. In a lambda cosN+ background, all amino acids tested at position 515 were functional. These results suggest that A-E515G plays an indirect role in extending the specificity of the endonuclease activity of lambda terminase.

ATP-reactive sites in the bacteriophage lambda packaging protein terminase lie in the N-termini of its subunits, gpA and gpNu1

ATP-reactive sites in terminase and its subunits have been successfully identified using three different affinity analogs of ATP (2-and 8-azidoATP and FITC) GpA, the larger subunit of terminase, was shown to have a higher affinity for these analogs than gpNu1, the smaller subunit. The suitability of these reagents as affinity analogs of ATP was demonstrated by ATP protection experiments and in vitro assays done with the modified proteins. These analogs were thus shown to modify the ATP-reactive sites. The results obtained from these experiments also indicate the importance of subunit-subunit interactions in the holoenzyme. Terminase, gpA, and gpNu1 were modified with these analogs and the ATP-reactive sites were identified by isolating the modified peptide by reverse-phase chromatography. The sequence analysis of the modified peptides indicates a region including amino acids 18-35 in the N-terminus of gpNu1 and a region including amino acids 59-85 in the N-terminus of gpA as being the ATP-reactive sites.

Termination of packaging of the bacteriophage lambda chromosome: cosQ is required for nicking the bottom strand of cosN

Termination of packaging of the lambda chromosome involves completion of translocation of the DNA into the head shell, and conversion of the translocation complex into a cleavage complex. The cleavage reaction introduces staggered nicks into the downstream cosN to generate the right cohesive end of the chromosome. cosQ, a site adjacent to cosN, was found to be required for nicking the bottom strand of cosN; bottom strand nicking was also sequence-specific for bps at the nick site. Nicking of the top strand of cosN (cosNL) was stimulated by cosQ, but fidelity and efficiency of cosNL nicking were largely dictated by other cos subsites (i.e. cosB and I2). Aberrant top-strand cleavage within cosQ was observed in the absence of I2, and nicking at a site 8 nt 5' to the normal cosNL nick site occurred in the absence of cosB. The presence of cosQ was found to be insufficient to arrest DNA translocation in vivo, indicating that cosQ, per se, is not a packaging stop signal. A model is presented in which the role of cosQ is to depolarize the asymmetric arrangement of terminase protomers in the translocation complex so that protomers are configured to match the 2-fold rotational symmetry of cosN.

Comparative analysis of the genomic DNA terminal regions of the lactococcal bacteriophages from species c2

In an attempt to compare the cos intergenic region and bordering ORFs from Lactococcus lactis bacteriophages of the species c2, the nucleotide sequence of a 2479-bp fragment containing the cos site of phage P001 DNA was determined and compared with the corresponding regions of phages c2, bIL67 and P6 (partial sequence), which belong to species c2. This comparative analysis revealed that some characteristic features of the cos intergenic region are conserved in all members of species c2. Some of them are specific to species c2, as is the case for a GC-rich repeat in phase with the double helix that is located close to cos. One conserved motif seems to be more general, as it is found in all the cos regions of L. lactis bacteriophages that have been sequenced. It consists in a 4-nt indirect repeat TCAN/NACT located in a 15-bp fragment containing cos. This motif may be related to terminase specificity, as most of the cos asymmetric cleavages identified up to now are located within, or at the border of, these indirectly repeated sequences. Finally, some of the conserved DNA motifs of the species c2 cos-intergenic region seem to be even more general, as they are homologous to the lambda-R sites known to be involved in the maturation and the encapsidation of phage lambda DNA. Our comparative analysis also showed that within c2 phage DNAs, large blocks of sequences, i.e. the intergenic cos region and ORF/17 on the one hand, and ORF/16 on the other hand, evolved as distinct entities, probably by block recombination between phage DNAs of the same species.

Kinetic analysis of the endonuclease activity of phage lambda terminase: assembly of a catalytically competent nicking complex is rate-limiting

The terminase enzyme from bacteriophage lambda is responsible for excision of a single genome from a concatameric DNA precursor and its insertion into an empty viral procapsid. The enzyme possesses a site-specific endonuclease activity which is responsible for excision of the viral genome and the formation of the 12 base-pair single-stranded "sticky" ends of mature lambda DNA. We have previously reported a kinetic analysis of the endonuclease activity of lambda terminase which showed an enzyme concentration-dependent change in the kinetic time course of the reaction [Tomka, M. A., & Catalano, C. E. (1993b) J. Biol. Chem. 268, 3056-3065]. We presented a model which suggested that the rate-limiting step in the nuclease reaction was the assembly of a catalytically competent prenicking complex. Here, we provide additional evidence for a slow assembly step in the nuclease reaction and demonstrate that the observed rate is affected by protein concentration, but not by the length of the DNA substrate. Consistent with our model, preincubation of terminase with DNA also yields an observable fast phase of the reaction, but only when large (> or = 3 kb) DNA substrates are used. Finally, we present data which demonstrate that phage lambda terminase can efficiently utilize DNA from the closely related phage phi21 as an endonuclease substrate and that the enzyme binds efficiently to the cosB region of both phage genomes. The implications of these results with respect to the assembly of a catalytically competent nucleoprotein complex required to initiate genome packaging are discussed.

Mutations affecting lysine-35 of gpNu1, the small subunit of bacteriophage lambda terminase, alter the strength and specificity of holoterminase interactions with DNA

The small subunit of lambda terminase, gpNu1, contains a low-affinity ATPase activity that is stimulated by nonspecific dsDNA. The location of the gpNu1 ATPase center is suggested by a sequence match between gpNu1 (29-VLRGGGKG-36) and the phosphate-binding loop, or P-loop (GXXXXGKT/S), of known ATPase. The proposed P-loop of gpNu1 is just downstream of a putative helix-turn-helix DNA-binding motif, located between residues 5 and 24. Published work has shown that changing lysine-35 of the proposed P-loop of gpNu1 alters the response of the ATPase activity to DNA, as follows. The changes gpNu1 k35A and gpNu1 K35D increase the level of DNA required for maximal stimulation of the gpNu1 ATPase by factors of 2- and 10-fold, respectively. The maximally stimulated ATPase activities of the mutant enzymes are indistinguishable from that of the wild-type enzyme. In the present work, the effects of changing lysine-35 on the cos-cleavage and DNA-packaging activities of terminase were examined. In vitro, the gpNu1 K35A enzyme cleaved cos as efficiently as the wild-type enzyme, but required a 2-fold increased level of substrate DNA for saturation, suggesting a slight reduction in DNA affinity. In a crude DNA-packaging system using cleaved lambda DNA as substrate, the gpNu1 K35A enzyme had a 10-fold defect. In vivo, lambda Nu1 K35A showed a 2-fold reduction in cos cleavage, but no packaged DNA was detected. The primary defect of the gpNu1 K35A enzyme was concluded to be in a post-cos-cleavage step of DNA packaging. In in vitro cos-cleavage experiments, the gpNu1 K35D enzyme had a 10-fold increased requirement for saturation by substrate DNA. Furthermore, the cos-cleavage activity of gpNu1 K35D enzyme was strongly inhibited by the presence of nonspecific DNA, indicating that the gpNu1 K35D enzyme is unable to discriminate effectively between cos and nonspecific DNA. No cos cleavage was observed in vivo for lambda Nu1 K35D, a result consistent with the discrimination defect found in vitro for the gpNu1 K35D enzyme. In a crude packaging system the gpNu1 K35D enzyme had a 200-fold defect; in a purified packaging system, the gpNu1 K35D enzyme was found to be unable to discriminate between lambda DNA and nonspecific phage T7 DNA, a result indicating that the gpNu1 K35D enzyme is also defective in discriminating between lambda DNA and nonspecific DNA during DNA packaging.

Mutations in Nu1, the gene encoding the small subunit of bacteriophage lambda terminase, suppress the postcleavage DNA packaging defect of cosB mutations

The linear double-stranded DNA molecules in lambda virions are generated by nicking of concatemeric intracellular DNA by terminase, the lambda DNA packaging enzyme. Staggered nicks are introduced at cosN to generate the cohesive ends of virion DNA. After nicking, the cohesive ends are separated by terminase; terminase bound to the left end of the DNA to be packaged then binds the empty protein shell, i.e., the prohead, and translocation of DNA into the prohead occurs. cosB, a site adjacent to cosN, is a terminase binding site. cosB facilitates the rate and fidelity of the cosN cleavage reaction by serving as an anchoring point for gpNu1, the small subunit of terminase. cosB is also crucial for the formation of a stable terminase-DNA complex, called complex I, formed after cosN cleavage. The role of complex I is to bind the prohead. Mutations in cosB affect both cosB functions, causing mild defects in cosN cleavage and severe packaging defects. The lethal cosB R3- R2- R1- mutation contains a transition mutation in each of the three gpNu1 binding sites of cosB. Pseudorevertants of lambda cosB R3- R2- R1- DNA contain suppressor mutations affecting gpNu1. Results of experiments that show that two such suppressors, Nu1ms1 and Nu1ms3, do not suppress the mild cosN cleavage defect caused by the cosB R3- R2- R1- mutation but strongly suppress the DNA packaging defect are presented. It is proposed that the suppressing terminases, unlike the wild-type enzyme, are able to assemble a stable complex I with cosB R3- R2- R1- DNA. Observations on the adenosine triphosphatase activities and protease susceptibilities of gpNu1 of the Nu1ms1 and Nu1ms3 terminases indicate that the conformation of gpNu1 is altered in the suppressing terminases.

Assembly of a nucleoprotein complex required for DNA packaging by bacteriophage lambda

A critical step in the assembly of bacteriophage lambda is the excision of a single genome from a concatemeric DNA precursor and insertion of genomic DNA into an empty viral capsid. DNA packaging is mediated by the lambda proteins gpNu1 and gpA, which form an enzyme complex known as terminase. Initiation of the packaging process requires assembly of the terminase subunits onto cos, the lambda DNA packaging sequence, and nicking of the duplex, thus forming the 12-base-pair "sticky" ends of the mature genome. We have utilized gel-retardation techniques to examine the interaction of gpNu1, gpA, and terminase holoenzyme with DNA. Our data demonstrate that gpNu1 interacts specifically with cos-containing DNA, forming three gel-retarded complexes. Similarly, the larger gpA subunit binds to DNA, forming two complexes; however, this subunit forms similar complexes with DNA substrates of random sequence. All of the nucleoprotein complexes examined are disrupted by elevated concentrations of NaCl and we suggest that altered DNA binding is responsible for the extreme salt sensitivity of the endonuclease activity of the enzyme [Tomka, M. A., & Catalano, C. E. (1993) J. Biol. Chem. 268, 3056-3065]. DNA binding by each subunit is strongly affected by the presence of the other, with 10- and 3-fold increases in the affinity of gpNu1 and gpA, respectively, for DNA. Moreover, our data suggest that the terminase subunits interact in solution prior to DNA binding. Finally, we provide evidence that complex I, the first stable intermediate in the packaging pathway, is composed of the mature left genome end bound to the terminase subunits and demonstrate that dissociation of the complex is quite slow (t1/2 > 8 h). The significance of these data with respect to terminase-mediated genome packaging is discussed.

Purification and characterization of the small subunit of phage T4 terminase, gp16, required for DNA packaging

Phage T4 terminase is an enzyme that binds to the portal protein of proheads and cuts and packages concatemeric DNA. The T4 terminase is composed of two subunits, gene products (gp) 16 and 17. The role of the small subunit, gp16, in T4 DNA packaging is not well characterized. We developed a new purification procedure to obtain large quantities of purified gp16 from an overexpression vector. The pure protein is found in two molecular weight forms, due to specific C-terminal truncation, displays in vitro packaging activity, and binds but does not hydrolyze ATP. gp16 forms specific oligomers, rings, and side-by-side double rings, as judged by native polyacrylamide gel electrophoresis and scanning transmission electron microscopy measurements. The single ring contains about eight monomers, and the rings have a diameter of about 8 nm with a central hole of about 2 nm. A DNA-binding helix-turn-helix motif close to the N terminus of gp16 is predicted. The oligomers do not bind to DNA, but following denaturation and renaturation in the presence of DNA, binding can be demonstrated by gel shift and filter binding assays. gp16 binds to double-stranded DNA but not single-stranded DNA, and appears to bind preferentially to a gene 16-containing DNA sequence.

Plasmids containing cos ends inhibit the replication of phage phi CTX in Pseudomonas aeruginosa

In bacteriophage phi CTX, the cohesive end sequences cos, the integrase gene int, the attachment site attP (the target site for int) and the gene ctx encoding a pore-forming cytotoxin CTX, are clustered. Phi CTX can infect some Pseudomonas aeruginosa strains with a subsequent induction of CTX expression. The 41 and 477 bp fragments containing cos ends of phi CTX DNA were cloned into the high copy number plasmid pHA10. After pretransformation with the cos ends containing plasmids, plaque formation of phi CTX and cytotoxin production in phi CTX-infected Pseudomonas aeruginosa cells decreased by 100- and 10-fold respectively. Twelve hours after phi CTX infection proteins binding with cooperativity to cos sequence containing cleavable ends and the 10 bp flanking sequences were detected by gel electrophoretic mobility retardation of [32P]cos DNA. The results suggest that the cos binding proteins of phi CTX are involved in phi CTX replication.

Kinetic and mutational dissection of the two ATPase activities of terminase, the DNA packaging enzyme of bacteriophage Chi

Terminase the DNA packaging enzyme of bacteriophage chi, is a heteromultimer of gpNul (21 kDa) and gpA (74 kDa) subunits, encoded by the chi Nul and A genes, respectively. Sequence comparisons indicate that both gpNu1 and gpA have a match to the P-loop motif of ATPase centers, which is a glycine-rich segment followed by a lysine. By site-specific mutagenesis, we changed the lysines of the putative P-loops of gpNul (k35) and gpA (K497) to arginine, alanine, or aspartic acid, and studied the mutant enzymes by kinetic analysis and photochemical cross-linking with 8-azido-ATP. Both the gpNul and gpA subunits of wild-type terminase were covalently modified with 8-N3[32P] ATP in the presence of UV light. Saturation occurred with apparent dissociation constants of 508 and 3.5 microM for gpNul and gpA, resepctively. ATPase assays showed two activities: a low-affinity activity (Km=469 microM), and a high-affinity activity (Km=4.6 microM). The gpNul K35A and gpNul K35D mutant terminases showed decreased activity in the low-affinity ATPase activity. The reduced activities of these enzymes were recovered when 10 times more DNA was added, suggesting that the primary defect of the enzymes is alteration of the nonspecific, double-stranded DNA binding activity of terminase. ATPase assays and photolabeling of the gpA K497A and gpA K497D mutant terminases showed reduced affinity for ATP at the high-affinity site which was not restored by increased DNA. In summary, the results indicate the presence of a low-affinity, DNA-stimulated ATPase center in gpNul, and a high-affinity site in gpA.

The in vitro translocase activity of lambda terminase and its subunits. Kinetic and biochemical analysis

The terminase holoenzyme of bacteriophage lambda is a multifunctional protein composed of two subunits, gpNu1 and gpA. In vitro, under certain conditions, terminase can render DNAs from various sources, of varying lengths and termini, resistant to degradation by high concentrations of DNase I. This reaction is completely dependent on the presence of terminase, proheads, a hydrolyzable triphosphate, and a divalent metal ion, and we propose that it is the result of translocation of DNA into proheads by terminase. This reaction is stoichiometric with respect to terminase, DNA, and proheads and can be supported by all deoxyribo- and ribonucleoside triphosphates, but not by the corresponding diphosphates or nonhydrolyzable ATP analogs. Mg2+ and Ca2+ promote the reaction, but Mn2+ and Zn2+ do not. In the absence of spermidine, translocase activity is low, but addition of the Escherichia coli protein integration host factor (IHF) promotes specific translocation of only those DNA fragments containing the terminase-binding site, cosB. When spermidine is present, nonspecific translocation of DNA from any source is stimulated. Under these conditions IHF no longer promotes specificity, but translocation of only cosB-containing DNA fragments can be restored by addition of small amounts of a dialyzed and RNase-treated E. coli extract, suggesting that additional host factor(s) may be involved in determination of packaging specificity. To a limited extent, gpA alone can promote translocation, but gpNu1, which has no translocase activity on its own, must be added to approach the holoenzyme-like activity levels. Formation of viable phage cannot be accomplished by gpA in the absence of gpNu1.

Rate of translocation of bacteriophage T7 DNA across the membranes of Escherichia coli

Translocation of bacteriophage T7 DNA from the capsid into the cell has been assayed by measuring the time after infection that each GATC site on the phage genome is methylated by cells containing high levels of DNA adenine methylase. Methylation at GATC sites on T7 DNA renders both the infecting genome and any newly synthesized molecules sensitive to the restriction enzyme DpnI. In a normal infection at 30 degrees C, translocation of the T7 genome into the cell takes between 9 and 12 min. In contrast, translocation of the entire phage lambda genome or of a T7 genome ejected from a lambda capsid can be detected within the first minute of infection. Entry of the leading end of the T7 genome occurs by a transcription-independent mechanism that brings both Escherichia coli and T7 promoters into the cell. Further translocation of the genome normally involves transcription by the RNA polymerases of both E. coli and T7; the rates of DNA translocation into the cell when catalyzed by each enzyme are comparable to the estimated rates of transcription of the respective enzymes. A GATC site located between the early E. coli promoters and the coding sequences of the first T7 protein made after infection is not methylated before the protein is synthesized, a result supporting the idea (B. A. Moffatt and F. W. Studier, J. Bacteriol. 170:2095-2105, 1988) that only certain proteins are permitted access to the entering T7 DNA. In the absence of transcription, the genomes of most T7 strains do not completely enter the cell. However, the entire genome of a mutant that lacks bp 3936 to 808 of T7 DNA enters the cell in a transcription-independent process at an average overall rate of 50 bp per s.

Virus DNA packaging: the strategy used by phage lambda

Phage lambda, like a number of other large DNA bacteriophages and the herpesviruses, produces concatemeric DNA during DNA replication. The concatemeric DNA is processed to produce unit-length, virion DNA by cutting at specific sites along the concatemer. DNA cutting is co-ordinated with DNA packaging, the process of translocation of the cut DNA into the preformed capsid precursor, the prohead. A key player in the lambda DNA packaging process is the phage-encoded enzyme terminase, which is involved in (i) recognition of the concatemeric lambda DNA; (ii) initiation of packaging, which includes the introduction of staggered nicks at cosN to generate the cohesive ends of virion DNA and the binding of the prohead; (iii) DNA packaging, possibly including the ATP-driven DNA translocation; and (iv) following translocation, the cutting of the terminal cosN to complete DNA packaging. To one side of cosN is the site cosB, which plays a role in the initiation of packaging; along with ATP, cosB stimulates the efficiency and adds fidelity to the endonuclease activity of terminase in cutting cosN. cosB is essential for the formation of a post-cleavage complex with terminase, complex I, that binds the prohead, forming a ternary assembly, complex II. Terminase interacts with cosN through its large subunit, gpA, and the small terminase subunit, gpNu1, interacts with cosB. Packaging follows complex II formation. cosN is flanked on the other side by the site cosQ, which is needed for termination, but not initiation, of DNA packaging. cosQ is required for cutting of the second cosN, i.e. the cosN at which termination occurs. DNA packaging in lambda has aspects that differ from other lambda DNA transactions. Unlike the site-specific recombination system of lambda, for DNA packaging the initial site-specific protein assemblage gives way to a mobile, translocating complex, and unlike the DNA replication system of lambda, the same protein machinery is used for both initiation and translocation during lambda DNA packaging.

Structure of viral connectors and their function in bacteriophage assembly and DNA packaging

The viruses have been an attractive model for the study of basic mechanisms of protein/protein and protein/nucleic acid interactions involved in the assembly of macromolecular aggregates. This has been due primarily to their relative genetic simplicity as compared to their structural and functional complexity. Although most of the initial studies were carried out on bacterial and plant viruses, increasing data has also been accumulated from animal viruses, which has led to an understanding of some basic principles, as well as to many specific strategies in every system. The study of virus assembly has been a source of ideas that underlie our present knowledge of the organization of biological systems. It has also provided, since the production of bacteriophage mutants which have allowed the study of assembly intermediates, the first system in which the genetic studies played a dominant role. The increasing volume of data over the last years has revealed how the structural components can interact sequentially through an ordered pathway to yield macromolecular assemblies that satisfy the demands of stability required for a successful transfer of genetic information from host to host.

Analysis of the cos region of the Lactococcus lactis bacteriophage sk1

The location, structure and nature of the cos site of the Lactococcus lactis bacteriophage sk1 was determined using a Taq DNA polymerase runoff sequencing technique. The cos site contains a single-stranded 3' overhang of 11 nucleotides. The region surrounding cos contains several features which may be involved in the binding and catalytic action of a phage terminase. These include four putative terminase-binding sites which show some homology to lambda R-sites, an 11-bp direct repeat, a 10-bp inverted repeat, a string of eight consecutive C residues and six copies of the pentanucleotide, AATCT. The spacing between adjacent copies of the pentanucleotides would place them on the same side of the DNA helix.

Multiple molecules of integration host factor (IHF) at a single DNA binding site, the bacteriophage lambda cos I1 site

Integration host factor (IHF) is an E coli protein that binds DNA sequence-specifically and serves as a cofactor in many intracellular processes including lambda DNA packaging. In gel shift experiments, cos DNA, a DNA fragment containing the recognition signal for lambda DNA packaging, forms multiple protein-DNA complexes when combined with pure IHF. Copper(II)-1,10 orthophenanthroline footprinting of individual IHF-cos DNA complexes shows that multiple complex formation does not result from IHF binding to successive sites on the cos DNA fragment. Instead, the footprinting of DNA from two IHF-cos complexes shows protection at one site alone. DNA in the first complex is only partially protected from nucleolytic cleavage, while DNA in the second, slower-moving, complex is completely protected at the same binding site. Quantitative Western blotting experiments determined the relative stoichiometry of IHF to DNA in the two complexes. The results confirm that two molecules of IHF bind at a single site in the cos fragment. This site, cos I1, has two matches to the IHF consensus sequence, but the two matches overlap by eight of thirteen nucleotides. A search of the DNA sequence around cos, using an expanded IHF consensus sequence, has revealed additional, low-affinity consensus matches, contiguous to these. The extent of the copper(II)-1,10 orthophenanthroline footprint and the stoichiometry of the IHF-cos I1 complexes suggest that either two molecules of IHF bind to overlapping sites, or IHF binds to a site of low affinity contiguous to a strong site. Application of a thermodynamic model to the results of gel shift experiments with IHF and cos DNA suggests that multiple complex formation requires cooperative interaction between the two IHF binding sites.

A site required for termination of packaging of the phage lambda chromosome

Lambda chromosomes are cut and packaged from concatemeric DNA by phage enzyme terminase. Terminase initiates DNA packaging by binding at a site called cosB and introducing staggered nicks at an adjacent site, cosN, to generate the left cohesive end of the DNA molecule to be packaged. After DNA packaging terminase recognizes and cuts the terminal cosN, an event that does not require a wild-type cosB. In this work a site, called cosQ, has been identified that is required for termination of DNA packaging. cosQ, defined by mutations in a sequence called R4, is located approximately 30 bp upstream from cosN. The order of sites is cosQ-cosN-cosB. Helper packaging of repressed, tandem prophage chromosomes demonstrated that a cosQ point mutation affects DNA packaging only when placed at the terminal cos site, whereas cosB mutations only affect packaging initiation. In vitro packaging studies confirmed that cosQ mutations do not affect packaging initiation. In vivo studies indicated that cosQ mutations do not affect cutting of initial cos sites but do cause a defect in packaging termination. cosQ mutants accumulated expanded phage heads, indicating that cosQ mutations affect a step that occurs after packaging of a substantial length of phage DNA. These results show that cosQ mutations define a site required for use of cos sites present at the ends of lambda chromosomes undergoing packaging. Available evidence suggests that other viruses, including phages T3 and T7 and the herpesviruses, may ultimately prove to use cosQ-like sites for packaging termination.

Sites and gene products involved in lambdoid phage DNA packaging

21 is a temperate lambdoid coliphage, and the genes that encode the head proteins of lambda and 21 are descended from a common ancestral bacteriophage. The sequencing of terminase genes 1 and 2 of 21 was completed, along with that of a segment at the right end of 21 DNA that includes the R4 sequence. The R4 sequence, a site that is likely involved in termination of DNA packaging, was found to be very similar to the R4 sequences of lambda and phi 80, suggesting that R4 is a recognition site that is not phage specific. DNA packaging by 21 is dependent on a host protein, integration host factor. A series of mutations in gene 1 (her mutations), which allow integration host factor-independent DNA packaging by 21, were found to be missense changes that affect predicted alpha-helixes in gp1. gp2, the large terminase subunit, is predicted to contain an ATP-binding domain and, perhaps, a second domain important for the cos-cutting activity of terminase. orf1, an open reading frame analogous in position to FI, a lambda gene involved in DNA packaging, shares some sequence identity with FI. orf1 was inactivated with nonsense and insertion mutations; these mutations were found not to affect phage growth. 21 was also not able to complement a lambda FI mutant.

Genetic analysis of mutations affecting terminase, the bacteriophage lambda DNA packaging enzyme, that suppress mutations in cosB, the terminase binding site

Terminase, the DNA packaging enzyme of phage lambda, binds to lambda DNA at a site called cosB, and introduces staggered nicks at an adjacent site, cosN, to generate the cohesive ends of virion lambda DNA molecules. Terminase also is involved in separation of the cohesive ends and in binding the prohead, the empty protein shell into which lambda DNA is packaged. Terminase is a DNA-dependent ATPase, and both subunits, gpNu1 and gpA, have ATPase activity. cosB contains a series of gpNu1 binding sites, R3, R2 and R1; between R3 and R2 is a binding site, I1, for integration host factor (IHF), the Escherichia coli DNA bending protein. In this work, a series of mutations in Nu1 have been isolated as suppressors of cosB mutations. One of the Nu1 mutations is identical to the previously described Nu1ms1/ohm1 mutation predicted to cause the change L40F in the 181 amino acid-long gpNu1. Three other Nu1 missense mutations, the Nu1ms2 (L40I), ms3 (Q97K) and ms4 (A92G) mutations, have been isolated; the relative strengths of suppression of cosB mutations by the Nu1ms mutations are: ms1 > ms2 > ms3 > ms4. The Nu1 missense mutations all affect amino acid residues that lie outside of the putative helix-turn-helix DNA binding motif of gpNu1. The Nu1ms1 and Nu1ms2 mutations alter an amino acid residue (L40) that lies directly between two segments of gpNu1 proposed to be involved in ATP binding and hydrolysis; thus these mutations are likely to alter the gpNu1 ATP-binding site. The Nu1ms3 and Nu1ms4 mutations both affect amino acid residues in the central region of gpNu1 that is predicted to form a hydrophilic alpha-helix. To explain how the Nu1ms mutations suppress cosB defects, models involving alterations of the DNA binding and/or catalytic properties of terminase are considered. The results also indicate that terminase occupancy of a single gpNu1 binding site (R3) is necessary and sufficient for the efficient initiation of DNA packaging; the Nu1ms1, ms2 and ms3 mutations permit IHF-independent plaque formation by a phage lacking R2 and R1.

Genetic analysis of cosB, the binding site for terminase, the DNA packaging enzyme of bacteriophage lambda

cosB, the binding site for terminase, the DNA packaging enzyme of bacteriophage lambda, consists of three binding sites (called R3, R2 and R1) for gpNu1, the small subunit of terminase; and I1, a binding site for integration host factor (IHF), the DNA bending protein of Escherichia coli. cosB is located between cosN, the site where terminase introduces staggered nicks to generate cohesive ends, and the Nu1 gene; the order of sites is: cosN-R3-I1-R2-R1-Nu1. A series of lambda mutants have been constructed that have single base-pair C-to-T transition mutations in R3, R2 and R1. A single base-pair transition mutation within any one of the gpNul binding sites renders lambda dependent upon IHF for plaque formation. lambda phage with mutations in both R2 and R3 are incapable of plaque formation even in the presence of IHF. Phages that carry DNA insertions between R1 and R2, from 7 to 20 base-pairs long, are also IHF-dependent, demonstrating the requirement for a precise spacing of gpNu1 binding sites within cosB. The IHF-dependent phenotype of a lambda mutant carrying a deletion of the R1 sequence indicates that IHF obviates the need for terminase binding to the R1 site. In contrast, a lambda mutant deleted for R2 and R1 fails to form plaques on either IHF+ or IHF- cells, indicating terminase binding of R2 is involved in suppression of R mutants by IHF. A fourth R sequence, R4, is situated on the left side of cosN; a phage with a mutant R4 sequence shows a reduced burst size on both an IHF+ and an IHF- host. The inability of the R4- mutant to be suppressed by IHF, plus the fact that R4 does not bind gpNu1, suggests R4 is not part of cosB and may play a role in DNA packaging that is distinct from that of cosB.

Mutations abolishing the endonuclease activity of bacteriophage lambda terminase lie in two distinct regions of the A gene, one of which may encode a "leucine zipper" DNA-binding domain

Bacteriophage lambda terminase is a multifunctional enzyme composed of two subunits which are the products of the phage-encoded Nu1 and A genes. The enzyme catalyzes the endonucleolytic cleavage of lambda DNA at a site known as cosN and mediates packaging of the phage DNA into empty heads. This work describes the characterization of mutations within the A gene which lead to the loss of terminase endonuclease activity without affecting the ability of the enzyme to package monomeric mature (cut) lambda DNA. The residues changed by these mutations lie in two distinct regions within the carboxy half of the A protein. One of these regions has sequence homology with a conserved region of DNA polymerases. The other region resembles the "leucine zipper" DNA binding domain (bZIP) found in eukaryotic transcription factors in that both a basic region and leucine heptad-repeat are present. This terminase domain may be involved in the recognition and/or cleavage of cosN.

Nucleotide sequence of the bacteriophage P22 genes required for DNA packaging

The mechanism of DNA packaging by dsDNA viruses is not well understood in any system. In bacteriophage P22 only five genes are required for successful condensation of DNA within the capsid. The products of three of these genes, the portal, scaffolding, and coat proteins, are structural components of the precursor particle, and two, the products of genes 2 and 3, are not. The scaffolding protein is lost from the structure during packaging, and only the portal and coat proteins are present in the mature virus particle. These five genes map in a contiguous cluster at the left end of the P22 genetic map. Three additional genes, 4, 10, and 26, are required for stabilizing of the condensed DNA within the capsid. In this report we present the nucleotide sequence of 7461 bp of P22 DNA that contains the five genes required for DNA condensation, as well as a nonessential open reading frame (ORF109), gene 4, and a portion of gene 10. N-terminal amino acid sequencing of the encoded proteins accurately located the translation starts of six genes in the sequence. Despite the fact that most of these proteins have striking analogs in the other dsDNA bacteriophage groups, which perform highly analogous functions, no amino acid sequence similarity between these analogous proteins has been found, indicating either that they diverged a very long time ago or that they are the products of spectacular convergent evolution.