Altered Rous sarcoma virus Gag polyprotein processing and its effects on particle formation

A myristoyl switch at the plasma membrane triggers cleavage and oligomerization of Mason-Pfizer monkey virus matrix protein

For most retroviruses, including HIV, association with the plasma membrane (PM) promotes the assembly of immature particles, which occurs simultaneously with budding and maturation. In these viruses, maturation is initiated by oligomerization of polyprotein precursors. In contrast, several retroviruses, such as Mason-Pfizer monkey virus (M-PMV), assemble in the cytoplasm into immature particles that are transported across the PM. Therefore, protease activation and specific cleavage must not occur until the pre-assembled particle interacts with the PM. This interaction is triggered by a bipartite signal consisting of a cluster of basic residues in the matrix (MA) domain of Gag polyprotein and a myristoyl moiety N-terminally attached to MA. Here, we provide evidence that myristoyl exposure from the MA core and its insertion into the PM occurs in M-PMV. By a combination of experimental methods, we show that this results in a structural change at the C-terminus of MA allowing efficient cleavage of MA from the downstream region of Gag. This suggests that, in addition to the known effect of the myristoyl switch of HIV-1 MA on the multimerization state of Gag and particle assembly, the myristoyl switch may have a regulatory role in initiating sequential cleavage of M-PMV Gag in immature particles.

Development of Rous sarcoma Virus-like Particles Displaying hCC49 scFv for Specific Targeted Drug Delivery to Human Colon Carcinoma Cells

PURPOSE

Virus-like particles (VLPs) have been used as drug carriers for drug delivery systems. In this study, hCC49 single chain fragment variable (scFv)-displaying Rous sarcoma virus-like particles (RSV VLPs) were produced in silkworm larvae to be a specific carrier of an anti-cancer drug.

METHOD

RSV VLPs displaying hCC49 scFv were created by the fusion of the transmembrane and cytoplasmic domains of hemagglutinin from influenza A (H1N1) virus and produced in silkworm larvae. The display of hCC49 scFv on the surface of RSV VLPs was confirmed by enzyme-linked immunosorbent assay using tumor-associated glycoprotein-72 (TAG-72), fluorescent microscopy, and immunoelectron microscopy. Fluorescein isothiocyanate (FITC) or doxorubicin (DOX) was incorporated into hCC49 scFv-displaying RSV VLPs by electroporation and specific targeting of these VLPs was investigated by fluorescent microscopy and cytotoxicity assay using LS174T cells.

RESULTS

FITC was delivered to LS174T human colon adenocarcinoma cells by hCC49 scFv-displaying RSV VLPs, but not by RSV VLPs. This indicated that hCC49 scFv allowed FITC-loaded RSV VLPs to be delivered to LS174T cells. DOX, which is an anti-cancer drug with intrinsic red fluorescence, was also loaded into hCC49 scFv-displaying RSV VLPs by electroporation; the DOX-loaded hCC49 scFv-displaying RSV VLPs killed LS174T cells via the specific delivery of DOX that was mediated by hCC49 scFv. HEK293 cells were alive even though in the presence of DOX-loaded hCC49 scFv-displaying RSV VLPs.

CONCLUSION

These results showed that hCC49 scFv-displaying RSV VLPs from silkworm larvae offered specific drug delivery to colon carcinoma cells in vitro. This scFv-displaying enveloped VLP system could be applied to drug and gene delivery to other target cells.

Retroviral proteases and their roles in virion maturation

Proteolytic processing of viral polyproteins is essential for retrovirus infectivity. Retroviral proteases (PR) become activated during or after assembly of the immature, non-infectious virion. They cleave viral polyproteins at specific sites, inducing major structural rearrangements termed maturation. Maturation converts retroviral enzymes into their functional form, transforms the immature shell into a metastable state primed for early replication events, and enhances viral entry competence. Not only cleavage at all PR recognition sites, but also an ordered sequence of cleavages is crucial. Proteolysis is tightly regulated, but the triggering mechanisms and kinetics and pathway of morphological transitions remain enigmatic. Here, we outline PR structures and substrate specificities focusing on HIV PR as a therapeutic target. We discuss design and clinical success of HIV PR inhibitors, as well as resistance development towards these drugs. Finally, we summarize data elucidating the role of proteolysis in maturation and highlight unsolved questions regarding retroviral maturation.

A look inside HIV resistance through retroviral protease interaction maps

Retroviruses affect a large number of species, from fish and birds to mammals and humans, with global socioeconomic negative impacts. Here the authors report and experimentally validate a novel approach for the analysis of the molecular networks that are involved in the recognition of substrates by retroviral proteases. Using multivariate analysis of the sequence-based physiochemical descriptions of 61 retroviral proteases comprising wild-type proteases, natural mutants, and drug-resistant forms of proteases from nine different viral species in relation to their ability to cleave 299 substrates, the authors mapped the physicochemical properties and cross-dependencies of the amino acids of the proteases and their substrates, which revealed a complex molecular interaction network of substrate recognition and cleavage. The approach allowed a detailed analysis of the molecular-chemical mechanisms involved in substrate cleavage by retroviral proteases.

Effects of human immunodeficiency virus type 1 transframe protein p6* mutations on viral protease-mediated Gag processing

The proteolytic processing of human immunodeficiency virus (HIV) particles mediated by the viral pol-encoded protease (PR) is essential for viral infectivity. The pol coding sequence partially overlaps with the gag coding sequence and is translated as a Gag-Pol polyprotein precursor. Within Gag-Pol, the C-terminal p6(gag) domain is replaced by a transframe peptide referred to as p6*, which separates the Gag nucleocapsid domain from PR. Several previous in vitro studies have ascribed a PR-suppression regulatory function to p6*. Here, it was demonstrated that an HIV-1 Gag-Pol lacking p6* is efficiently incorporated into virions when coexpressed with HIV-1 Gag precursor. However, the released virions are not processed appropriately and show a greatly reduced viral infectivity. This suggests that the p6* is indispensable during the process of PR-mediated virus particle maturation.

Processing sites in the human immunodeficiency virus type 1 (HIV-1) Gag-Pro-Pol precursor are cleaved by the viral protease at different rates

We have examined the kinetics of processing of the HIV-1 Gag-Pro-Pol precursor in an in vitro assay with mature protease added in trans. The processing sites were cleaved at different rates to produce distinct intermediates. The initial cleavage occurred at the p2/NC site. Intermediate cleavages occurred at similar rates at the MA/CA and RT/IN sites, and to a lesser extent at sites upstream of RT. Late cleavages occurred at the sites flanking the protease (PR) domain, suggesting sequestering of these sites. We observed paired intermediates indicative of half- cleavage of RT/RH site, suggesting that the RT domain in Gag-Pro-Pol was in a dimeric form under these assay conditions. These results clarify our understanding of the processing kinetics of the Gag-Pro-Pol precursor and suggest regulated cleavage. Our results further suggest that early dimerization of the PR and RT domains may serve as a regulatory element to influence the kinetics of processing within the Pol domain.

Mutations affecting cleavage at the p10-capsid protease cleavage site block Rous sarcoma virus replication

A series of amino acid substitutions (M239F, M239G, P240F, V241G) were placed in the p10-CA protease cleavage site (VVAM*PVVI) to change the rate of cleavage of the junction. The effects of these substitutions on p10-CA cleavage by RSV PR were confirmed by measuring the kinetics of cleavage of model peptide substrates containing the wild type and mutant p10-CA sites. The effects of these substitutions on processing of the Gag polyprotein were determined by labeling Gag transfected COS-1 cells with ³⁵S-Met and -Cys, and immunoprecipitation of Gag and its cleavage products from the media and lysate fractions. All substitutions except M239F caused decreases in detectable Gag processing and subsequent release from cells. Several of the mutants also caused defects in production of the three CA proteins. The p10-CA mutations were subcloned into an RSV proviral vector (RCAN) and introduced into a chick embryo fibroblast cell line (DF-1). All of the mutations except M239F blocked RSV replication. In addition, the effects of the M239F and M239G substitutions on the morphology of released virus particles were examined by electron microscopy. While the M239F particles appeared similar to wild type particles, M239G particles contained cores that were large and misshapen. These results suggest that mutations affecting cleavage at the p10-CA protease cleavage site block RSV replication and can have a negative impact on virus particle morphology.

Characterization of human immunodeficiency virus type 1 Pr160 gag-pol mutants with truncations downstream of the protease domain

We have constructed a series of HIV-1 Gag-pol mutants by progressive deletion of the pol sequence downstream of the viral protease (PR) domain. Effects of the truncation mutations on virus particle production and Gag particle processing were analyzed. Analysis indicated that removal of the integrase (IN) domain had no major effect on the efficiency of particle processing, but resulted in a marked reduction in virus particle budding. Deletion of both the IN and RNase H domains, however, restored the production of virus particles to wild-type level. The proteolytic processing of virus particle was significantly impaired when the p51RT domain was truncated. All of the truncated Gag-pol proteins could be incorporated into virus particles and demonstrated an immunofluorescence staining pattern similar to that of the wild type (wt). Our data are consistent with the proposal that signals for directing the Gag-pol transport and particle incorporation are determined by its N-terminal Gag domain. Truncated Gag-pol retaining an intact p51RT was able to complement a PR-defective mutant to produce infectious pseudotyped virions, with a virus titer 20-70% of that of wt. Pseudotyped virions produced by the Gag-pol lacking an intact p51RT were noninfectious or poorly infectious. This suggests that an intact p51RT domain is required for the Gag-pol to mediate production of mature infectious virus particles in trans.

Initial cleavage of the human immunodeficiency virus type 1 GagPol precursor by its activated protease occurs by an intramolecular mechanism

Processing of the GagPol polyprotein precursor of human immunodeficiency virus type 1 (HIV-1) is a critical step in viral assembly and replication. The HIV-1 protease (PR) is translated as part of GagPol and is both necessary and sufficient for precursor processing. The PR is active only as a dimer; enzyme activation is initiated when the PR domains in two GagPol precursors dimerize. The precise mechanism by which the PR becomes activated and the subsequent initial steps in precursor processing are not well understood. However, it is clear that processing is initiated by the PR domain that is embedded within the precursor itself. We have examined the earliest events in precursor processing using an in vitro assay in which full-length GagPol is cleaved by its embedded PR. We demonstrate that the embedded, immature PR is as much as 10,000-fold less sensitive to inhibition by an active-site PR inhibitor than is the mature, free enzyme. Further, we find that different concentrations of the active-site inhibitor are required to inhibit the processing of different cleavage sites within GagPol. Finally, our results indicate that the first cleavages carried out by the activated PR within GagPol are intramolecular. Overall, our data support a model of virus assembly in which the first cleavages occur in GagPol upstream of the PR. These intramolecular cleavages produce an extended form of PR that completes the final processing steps accompanying the final stages of particle assembly by an intermolecular mechanism.

The virus-associated human immunodeficiency virus type 1 Gag-Pol carrying an active protease domain in the matrix region is severely defective both in autoprocessing and in trans processing of gag particles

We have previously demonstrated that a human immunodeficiency virus (HIV) chimeric Gag protein containing a partial replacement of the matrix domain by the viral protease domain (PR) could undergo autoprocessing with no virus particle production [J. Virol. 74 (2000) 3418]. To further analyze the effects of repositioned PR on virus particle production and Gag-Pol incorporation, we introduced the chimeric PR construct into a PR-negative Gag-Pol expression plasmid and coexpressed the resultant construct with a Pr55(gag) expression plasmid (pGAG) in 293T cells. Analysis indicated that the chimeric PR was similar to native PR in that both could prevent virus particle production in cotransfections with an equivalent amount of pGAG plasmid DNA, suggesting an efficient trans processing of Pr55(gag) by the chimeric PR. In cotransfections with the pGAG at a DNA ratio of 1:10 to 1:20, which resembles the normal intracellular expression ratio of Gag-Pol to Gag, Gag-Pol carrying the PR in the Gag coding region could undergo autoprocessing in cells and was incorporated into virus particles at a level about 20-40% of that of wild-type Gag-Pol. However, the incorporated chimeric Gag-Pol was unable to autocleave and unable to process the Gag particles properly, as mature particle-associated reverse transcriptase (RT) and p24(gag) proteins were barely detected. Our data strongly suggest that positioning an active HIV PR in the matrix region significantly affects the PR-mediated virus particle maturation.

The PPPY motif of human T-cell leukemia virus type 1 Gag protein is required early in the budding process

Domains required late in the virus budding process (L domains) have been identified in the Gag proteins of a number of retroviruses. Here we show that the human T-cell leukemia virus type 1 candidate L domain motif PPPY is indeed required for virus production. Strikingly, however, mutation of this motif arrested virus particles at an earlier stage in the budding process than was seen for mutation of the L domain motifs thus far described for retroviruses. In view of the exchangeability of such domains, we propose that the retrovirus budding process may involve a continuum from bud formation to membrane fission.

Analysis of Rous sarcoma virus capsid protein variants assembled on lipid monolayers

During assembly and morphogenesis of Rous sarcoma virus (RSV), proteolytic processing of the structural precursor (Pr76Gag) protein generates three capsid (CA) protein variants, CA476, CA479, and CA488. The proteins share identical N-terminal domains (NTDs), but are truncated at residues corresponding to gag codons 476, 479, and 488 in their CA C-terminal domains (CTDs). To characterize oligomeric forms of the RSV CA variants, we examined 2D crystals of the capsid proteins, assembled on lipid monolayers. Using electron microscopy and image analysis approaches, the CA proteins were observed to organize in hexagonal (p6) arrangements, where rings of membrane-proximal NTD hexamers were spaced at 95 A intervals. Differences between the oligomeric structures of the CA variants were most evident in membrane-distal regions, where apparent CTDs interconnect hexamer rings. In this region, CA488 connections were observed readily, while CA476 and CA479 contacts were resolved poorly, suggesting that in vivo processing of CA488 to the shorter forms may permit virions to adopt a dissembly-competent conformation. In addition to crystalline arrays, the CA479 and CA488 proteins formed small spherical particles with diameters of 165-175 A. The spheres appear to be arranged from hexamer or hexamer plus pentamer ring subunits that are related to the 2D crystal forms. Our results implicate RSV CA hexamer rings as basic elements in the assembly of RSV virus cores.

Activation of the Mason-Pfizer monkey virus protease within immature capsids in vitro

For all retroviruses, the completion of the viral budding process correlates with the activation of the viral protease by an unknown mechanism, and, as the structural (Gag) polyproteins are cleaved by the viral protease, maturation of the immature virus-like particle into an infectious virion. Unlike most retroviruses, the Mason-Pfizer monkey virus Gag polyproteins assemble into immature capsids within the cytoplasm of the cell before the viral budding event. The results reported here describe a unique experimental system in which Mason-Pfizer monkey virus immature capsids are removed from the cell, and the protease is activated in vitro by the addition of a reducing agent. The cleavage of the protease from the precursor form is a primary event, which proceeds with a half time of 14 min, and is followed by authentic processing of the Gag polyproteins. Activity of the viral protease in vitro depends on pH, with an increase in catalytic rates at acidic and neutral pH. The initiation of protease activity within immature capsids in vitro demonstrates that viral protease activity is sensitive to oxidation-reduction conditions, and that the viral protease can be activated in the absence of viral budding.

Insertion of capsid proteins from nonenveloped viruses into the retroviral budding pathway

Retroviral Gag proteins direct the assembly and release of virus particles from the plasma membrane. The budding machinery consists of three small domains, the M (membrane-binding), I (interaction), and L (late or "pinching-off") domains. In addition, Gag proteins contain sequences that control particle size. For Rous sarcoma virus (RSV), the size determinant maps to the capsid (CA)-spacer peptide (SP) sequence, but it functions only when I domains are present to enable particles of normal density to be produced. Small deletions throughout the CA-SP sequence result in the release of particles that are very large and heterogeneous, even when I domains are present. In this report, we show that particles of relatively uniform size and normal density are released by budding when the size determinant and I domains in RSV Gag are replaced with capsid proteins from two unrelated, nonenveloped viruses: simian virus 40 and satellite tobacco mosaic virus. These results indicate that capsid proteins of nonenveloped viruses can interact among themselves within the context of Gag and be inserted into the retroviral budding pathway merely by attaching the M and L domains to their amino termini. Thus, the differences in the assembly pathways of enveloped and nonenveloped viruses may be far simpler than previously thought.

Membrane targeting properties of a herpesvirus tegument protein-retrovirus Gag chimera

The retroviral Gag protein is capable of directing the production and release of virus-like particles in the absence of all other viral components. Budding normally occurs after Gag is transported to the plasma membrane by its membrane-targeting and -binding (M) domain. In the Rous sarcoma virus (RSV) Gag protein, the M domain is contained within the first 86 amino acids. When M is deleted, membrane association and budding fail to occur. Budding is restored when M is replaced with foreign membrane-binding sequences, such as that of the Src oncoprotein. Moreover, the RSV M domain is capable of targeting heterologous proteins to the plasma membrane. Although the solution structure of the RSV M domain has been determined, the mechanism by which M specifically targets Gag to the plasma membrane rather than to one or more of the large number of internal membrane surfaces (e.g., the Golgi apparatus, endoplasmic reticulum, and nuclear, mitochondrial, or lysosomal membranes) is unknown. To further investigate the requirements for targeting proteins to discrete cellular locations, we have replaced the M domain of RSV with the product of the unique long region 11 (U(L)11) gene of herpes simplex virus type 1. This 96-amino-acid myristylated protein is thought to be involved in virion transport and envelopment at internal membrane sites. When the first 100 amino acids of RSV Gag (including the M domain) were replaced by the entire UL11 sequence, the chimeric protein localized at and budded into the Golgi apparatus rather than being targeted to the plasma membrane. Myristate was found to be required for this specific targeting, as were the first 49 amino acids of UL11, which contain an acidic cluster motif. In addition to shedding new light on UL11, these experiments demonstrate that RSV Gag can be directed to internal cellular membranes and suggest that regions outside of the M domain do not contain a dominant plasma membrane-targeting motif.

Assembly and processing of human immunodeficiency virus Gag mutants containing a partial replacement of the matrix domain by the viral protease domain

We constructed human immunodeficiency virus (HIV) mutants by replacing the matrix domain with sequences encoding the viral protease or p6* and protease. The chimeras retaining matrix myristylation and processing signals underwent efficient autoprocessing with severely defective particle budding. The budding defects of the chimeras were rescued by suppressing the chimera protease activity either through addition of an HIV protease inhibitor or through inactivating the chimera protease via a substitution mutation of the catalytic aspartic acid residue. This resulted in the release of chimeric virus-like particles with the density of a wild-type retrovirus particle. In addition, the assembly-competent but processing-defective chimeras produced proteolytically processed particles with significant reverse transcriptase activity when a downstream native pol gene was present. These results suggest that HIV has the potential to adapt heterologous sequences in place of the matrix sequence without major effects on virus-like particle budding. In addition, the positions of the protease and substrate accessibility may contribute significantly toward avoiding a premature Gag or Gag-Pol process, which leads to severe defects in both particle budding and incorporation.

Structural and biochemical studies of retroviral proteases

Retroviral proteases form a unique subclass of the family of aspartic proteases. These homodimeric enzymes from a number of viral sources have by now been extensively characterized, both structurally and biochemically. The importance of such knowledge to the development of new drugs against AIDS has been, to a large extent, the driving force behind this progress. High-resolution structures are now available for enzymes from human immunodeficiency virus types 1 and 2, simian immunodeficiency virus, feline immunodeficiency virus, Rous sarcoma virus, and equine infectious anemia virus. In this review, structural and biochemical data for retroviral proteases are compared in order to analyze the similarities and differences between the enzymes from different sources and to enhance our understanding of their properties.

Particle size determinants in the human immunodeficiency virus type 1 Gag protein

The retroviral Gag protein plays the central role in the assembly process and can form membrane-enclosed, virus-like particles in the absence of any other viral products. These particles are similar to authentic virions in density and size. Three small domains of the human immunodeficiency virus type 1 (HIV-1) Gag protein have been previously identified as being important for budding. Regions that lie outside these domains can be deleted without any effect on particle release or density. However, the regions of Gag that control the size of HIV-1 particles are less well understood. In the case of Rous sarcoma virus (RSV), the size determinant maps to the CA (capsid) and adjacent spacer sequences within Gag, but systematic mapping of the HIV Gag protein has not been reported. To locate the size determinants of HIV-1, we analyzed a large collection of Gag mutants. To our surprise, all mutants with defects in the MA (matrix), CA, and the N-terminal part of NC (nucleocapsid) sequences produced dense particles of normal size, suggesting that oncoviruses (RSV) and lentiviruses (HIV-1) have different size-controlling elements. The most important region found to be critical for determining HIV-1 particle size is the p6 sequence. Particles lacking all or small parts of p6 were uniform in size distribution but very large as measured by rate zonal gradients. Further evidence for this novel function of p6 was obtained by placing this sequence at the C terminus of RSV CA mutants that produce heterogeneously sized particles. We found that the RSV-p6 chimeras produced normally sized particles. Thus, we present evidence that the entire p6 sequence plays a role in determining the size of a retroviral particle.

Genetic determinants of Rous sarcoma virus particle size

The Gag proteins of retroviruses are the only viral products required for the release of membrane-enclosed particles by budding from the host cell. Particles released when these proteins are expressed alone are identical to authentic virions in their rates of budding, proteolytic processing, and core morphology, as well as density and size. We have previously mapped three very small, modular regions of the Rous sarcoma virus (RSV) Gag protein that are necessary for budding. These assembly domains constitute only 20% of RSV Gag, and alterations within them block or severely impair particle formation. Regions outside of these domains can be deleted without any effect on the density of the particles that are released. However, since density and size are independent parameters for retroviral particles, we employed rate-zonal gradients and electron microscopy in an exhaustive study of mutants lacking the various dispensable segments of Gag to determine which regions would be required to constrain or define the particle dimensions. The only sequence found to be absolutely critical for determining particle size was that of the initial capsid cleavage product, CA-SP, which contains all of the CA sequence plus the spacer peptides located between CA and NC. Some regions of CA-SP appear to be more important than others. In particular, the major homology region does not contribute to defining particle size. Further evidence for interactions among CA-SP domains was obtained from genetic complementation experiments using mutant deltaNC, which lacks the RNA interaction domains in the NC sequence but retains a complete CA-SP sequence. This mutant produces low-density particles heterogeneous in size. It was rescued into particles of normal size and density, but only when the complementing Gag molecules contained the complete CA-SP sequence. We conclude that CA-SP functions during budding in a manner that is independent of the other assembly domains.

Noninfectious virus-like particles produced by Moloney murine leukemia virus-based retrovirus packaging cells deficient in viral envelope become infectious in the presence of lipofection reagents

Retrovirus packaging cell lines expressing the Moloney murine leukemia virus gag and pol genes but lacking virus envelope genes produce virus-like particles constitutively, whether or not they express a transcript from an integrated retroviral provirus. In the absence of a proviral transcript, the assembled particles contain processed gag and reverse transcriptase, and particles made by cells expressing an integrated lacZ provirus also contain viral RNA. The virus-like particles from both cell types are enveloped and are secreted/budded into the extracellular space but are noninfectious. Their physicochemical properties are similar to those of mature retroviral particles. The noninfectious gag pol RNA particles can readily be made infectious by the addition of lipofection reagents to produce preparations with titers of up to 10(5) colony-forming units per ml.