Photocatalytic Protein Damage by Silver Nanoparticles Circumvents Bacterial Stress Response and Multidrug Resistance

Metallic nanoparticle actions on the outer layer structure and properties of Bacillus cereus and Staphylococcus epidermidis

Although the antimicrobial activity of nanoparticles (NPs) penetrating inside the cell is widely recognised, the toxicity of large NPs (>10 nm) that cannot be translocated across bacterial membranes remains unclear. Therefore, this study was performed to elucidate the direct effects of Ag-NPs, Cu-NPs, ZnO-NPs and TiO2-NPs on relative membrane potential, permeability, hydrophobicity, structural changes within chemical compounds at the molecular level and the distribution of NPs on the surfaces of the bacteria Bacillus cereus and Staphylococcus epidermidis. Overall analysis of the results indicated the different impacts of individual NPs on the measured parameters in both strains depending on their type and concentration. B. cereus proved to be more resistant to the action of NPs than S. epidermidis. Generally, Cu-NPs showed the most substantial toxic effect on both strains; however, Ag-NPs exhibited negligible toxicity. All NPs had a strong affinity for cell surfaces and showed strain-dependent characteristic dispersion. ATR-FTIR analysis explained the distinctive interactions of NPs with bacterial functional groups, leading to macromolecular structural modifications. The results presented provide new and solid evidence for the current understanding of the interactions of metallic NPs with bacterial membranes.

Nanoparticles in plant resistance against bacterial pathogens: current status and future prospects

Nanoparticles (NPs) serve immense roles in various fields of science. They have vastly upgraded conventional methods in the fields of agriculture and food sciences to eliminate growing threats of crop damage and disease, caused by various phytopathogens including bacteria, fungi, viruses, and some insects. Bacterial diseases resulted in mass damage of crops by adopting antibacterial resistance, which has proved to be a major threat leading to food scarcity. Therefore, numerous NPs with antibacterial potentials have been formulated to overcome the problem of antibiotic resistance alongside an increase in crop yield and boosting plant immunity. NPs synthesized through green synthesis techniques have proved to be more effective and environment-friendly than those synthesized via chemical methods. NPs exhibit great roles in plants ranging from enhanced crop yield to disease suppression, to targeted drug and pesticide deliveries inside the plants and acting as biosensors for pathogen detection. NPs serves major roles in disruption of cellular membranes, ROS production, altering of DNA and protein entities and changing energy transductions. This review focuses on the antibacterial effect of NPs on several plant bacterial pathogens, mostly, against Pseudomonas syringe, Ralstonia solanacearum, Xanthomonas axonopodis, Clavibacter michiganensisand Pantoea ananatis both in vivo and ex vivo, thereby minimizing their antibacterial resistance and enhancing the plants acquired immunity. Therefore, NPs present a safer and more reliable bactericidal activity against various disease-causing bacteria in plants.

Zwitterionic silver nanoparticle based antibacterial eye drops for efficient therapy of bacterial keratitis

Inefficient biofilm clearance and the risk of drug resistance pose significant challenges for antibiotic eye drops in the treatment of bacterial keratitis (BK). Recently, silver nanoparticles (AgNPs) have emerged as promising alternatives to antibiotics due to their potent antibacterial activity and minimal drug resistance. However, concerns regarding the potential biotoxicity of aggregated AgNPs in tissues have limited their practical application. In this study, polyzwitterion-functionalized AgNPs with excellent dispersion stability in the ocular physiological environment were chosen to prepare antibacterial eye drops. Zwitterionic AgNPs were synthesized using a copolymer, poly(sulfobetaine methacrylate-co-dopamine methacrylamide) (PSBDA), as a stabilizer and a reducing agent. The resulting antibacterial eye drops, named ZP@Ag-drops, demonstrated outstanding biocompatibility in in vitro cytotoxicity tests and in vivo rabbit eye instillation experiments, attributed to the zwitterionic PSBDA surface. Furthermore, the ZP@Ag-drops exhibited strong antibacterial activity against multiple pathogenic bacteria, particularly in penetrating and eradicating biofilms, due to the synergistic bactericidal effect of the released Ag+ and reactive oxygen species (ROS). Importantly, in vivo BK rabbit models showed that the ZP@Ag-drops effectively inhibited corneal infection and prevented ocular tissue damage, surpassing the therapeutic effect of commercial levofloxacin eye drops (LEV-drops). Overall, this study presents a promising alternative option for the effective treatment of BK using antibacterial eye drops.

Advancements in antimicrobial nanoscale materials and self-assembling systems

Antimicrobial resistance is directly responsible for more deaths per year than either HIV/AIDS or malaria and is predicted to incur a cumulative societal financial burden of at least $100 trillion between 2014 and 2050. Already heralded as one of the greatest threats to human health, the onset of the coronavirus pandemic has accelerated the prevalence of antimicrobial resistant bacterial infections due to factors including increased global antibiotic/antimicrobial use. Thus an urgent need for novel therapeutics to combat what some have termed the 'silent pandemic' is evident. This review acts as a repository of research and an overview of the novel therapeutic strategies being developed to overcome antimicrobial resistance, with a focus on self-assembling systems and nanoscale materials. The fundamental mechanisms of action, as well as the key advantages and disadvantages of each system are discussed, and attention is drawn to key examples within each field. As a result, this review provides a guide to the further design and development of antimicrobial systems, and outlines the interdisciplinary techniques required to translate this fundamental research towards the clinic.

Progress and prospects of nanomaterials against resistant bacteria

Drug-resistant bacterial infections are increasingly heightening, which lead to more severe illness, higher cost of treatment and increased risk of death. Nanomaterials-based therapy, an "outrider", serving as a kind of innovative antimicrobial therapeutics, showing promise in replacing antimicrobial agents and enhancing the activity of antibiotics, generally bases on the various inorganic and/or organic materials. When the size of those materials is below to a certain nano-level and the content of nanomaterials is above a certain amount, they are lethal to the resistant bacteria, which bypass the traditional bacterial resistance mechanisms. This review highlights the effect of nanomaterials in combating extracellular/intracellular bacteria and eradicating biofilms. Based on the studies searched on the Web of Science through relevant keywords, this review article starts with analyzing the current situation, resistance mechanisms, and treatment difficulties of bacteria resistance. Then, the efficacy of nanomaterials against resistant bacteria and their mechanisms (e.g., physical impairment, biofilm lysis, regulating bacterial metabolism, protein and DNA replication as well as enhancing the antibiotics concentration in infected cells) are collected. Lastly, the factors affecting the antibacterial efficacy are argued from the side of nanomatrials and bacterium, which followed by the emerging challenges and recent perspectives of achieving higher targeting released nanomaterials as antibacterial therapeutics.

Silver Nanoparticle-Based Therapy: Can It Be Useful to Combat Multi-Drug Resistant Bacteria?

The present review focuses on the potential use of silver nanoparticles in the therapy of diseases caused by antibiotic-resistant bacteria. Such bacteria are known as “superbugs”, and the most concerning species are Acinetobacter baumannii, Pseudomonas aeruginosa, Staphylococcus aureus (methicillin and vancomycin-resistant), and some Enterobacteriaceae. According to the World Health Organization (WHO), there is an urgent need for new treatments against these “superbugs”. One of the possible approaches in the treatment of these species is the use of antibacterial nanoparticles. After a short overview of nanoparticle usage, mechanisms of action, and methods of synthesis of nanoparticles, emphasis has been placed on the use of silver nanoparticles (AgNPs) to combat the most relevant emerging resistant bacteria. The toxicological aspects of the AgNPs, both in vitro using cell cultures and in vivo have been reviewed. It was found that toxic activity of AgNPs is dependent on dose, size, shape, and electrical charge. The mechanism of action of AgNPs involves interactions at various levels such as plasma membrane, DNA replication, inactivation of protein/enzymes necessary, and formation of reactive oxygen species (ROS) leading to cell death. Researchers do not always agree in their conclusions on the topic and more work is needed in this field before AgNPs can be effectively applied in clinical therapy to combat multi-drug resistant bacteria.

Disinfection and Photocatalytic Degradation of Organic Contaminants Using Visible Light-Activated GCN/Ag2CrO4 Nanocomposites

Visible-light-driven photocatalysts have gained increasing attention in the past few decades in treating emerging contaminants in water and wastewater. In this work, the photocatalytic activity of the coupled graphitic carbon nitride (GCN) and silver chromate (Ag2CrO4), herein denoted as GCN/Ag2CrO4, nanocomposites was evaluated for degrading organic pollutants and inactivating microorganisms under visible light irradiation using a royal blue light-emitting diode (LED). The organic pollutants studied were 2,4-dichlorophenoxyacetic acid (2,4-D) and methyl chlorophenoxy propionic acid (MCPP or Mecoprop-P) present in KillexR, a commercially available herbicide, bovine serum albumin (BSA) protein, and SARS-CoV-2 spike protein. The disinfection experiments were conducted on wastewater secondary effluent. The results showed that over 85% degradation was achieved for both 2,4-D and Mecoprop-P in 120 min while 100% of BSA protein and 77.5% of SARS-CoV-2 protein were degraded in 20 min and 30 min, respectively. Additionally, GCN/Ag2CrO4 nanocomposites led to over one log reduction of cellular ATP (cATP), total coliforms, and E. coli in wastewater treatment plant (WWTP) secondary effluent after 60 min of royal blue LED irradiation. It was observed that the degradation performance of a photocatalyst under light irradiation is contaminant-specific. The binding affinity of the released metal ions from GCN/Ag2CrO4 with protein and ATP functional groups was responsible for the degradation of proteins and the reduction of cATP, while the generated ROS was responsible for the disinfection of total coliforms and E. coli. Overall, the results indicate that GCN/Ag2CrO4 nanocomposite is a promising photocatalyst in degrading organic pollutants and disinfecting microorganisms under visible light irradiation within a reasonable time.

Influence of preparation of silver nanoparticles in carriers based on polymer/inorganic hybrids on the mineral composition of chicken eggs

The solution to the problem of reducing the use of antibiotics in the production of edible eggs is possible through the development and use of alternative bactericidal preparations, including those based on nanosilver. Obtaining biocompatible and biodegradable polymer/inorganic carriers of nanosilver provides for the study of its cumulative qualities which determine the safety of edible chicken eggs. The study investigated the mineral composition of edible eggs when feeding Hy-Line W36 laying hens solutions of the nanosilver preparation in carriers based on polymer/inorganic hybrids (AgNPs/SPH) given in the concentrations of 0, 1.0, and 2.0 mg/L of water (0, 0.2 and 0.4 mg/hen per day) three times at 10 day intervals. Oral administration to laying hens of an aqueous solution of silver nanoparticles in carriers based on polymer/inorganic hybrids at doses of 0.2 and 0.4 mg per hen per day in a dose-dependent manner increased the silver content and did not significantly affect the content of copper, zinc, iron, and lead in the eggshell. The preparation of silver nanoparticles did not affect the content of silver, copper, zinc, iron and lead in the albumen and yolk of chicken eggs after the first and second application, and after the third treatment of laying hens contributed to an increase in the silver content in the egg albumen and yolk but did not affect the content in them of copper, zinc, iron and lead. A single feeding of a solution of a preparation of nanosilver in carriers based on polymer/inorganic hybrids to hens at doses of 0.2 and 0.4 mg per hen per day after 10 days, contributed to a significant increase in the yolks of chicken eggs due to a decrease in the albumen and eggshell. The second and third application of nanosilver to poultry in the indicated doses contributed to a decrease in its proportion in the albumen and in the yolk due to a significant increase in its proportion in the shell. Selective accumulation of in-shell silver can be a promising means of improving the safety and security of chicken eggs when they are microbially contaminated. The results of using nanosilver based on polymer/inorganic hybrids in laying hens can be the basis for the development of methods for increasing the bactericidal properties of the shell and the safety of edible eggs.

Current approaches for the exploration of antimicrobial activities of nanoparticles

Infectious diseases of bacterial and viral origins contribute to substantial mortality worldwide. Collaborative efforts have been underway between academia and the industry to develop technologies for a more effective treatment for such diseases. Due to their utility in various industrial applications, nanoparticles (NPs) offer promising potential as antimicrobial agents against bacterial and viral infections. NPs have been established to possess potent antimicrobial activities against various types of pathogens due to their unique characteristics and cell-damaging ability through several mechanisms. The recently accepted antimicrobial mechanisms possessed by NPs include metal ion release, oxidative stress induction, and non-oxidative mechanisms. Another merit of NPs lies in the low likelihood of the development of microbial tolerance towards NPs, given the multiple simultaneous mechanisms of action against the pathogens targeting numerous gene mutations in these pathogens. Moreover, NPs provide a fascinating opportunity to curb microbial growth before infections: this outstanding feature has led to their utilization as active antimicrobial agents in different industrial applications, e.g. the coating of medical devices, incorporation in food packaging, promoting wound healing and encapsulation with other potential materials for wastewater treatment. This review discusses the progress and achievements in the antimicrobial applications of NPs, factors contributing to their actions, mechanisms underlying their efficiency, and risks of their applications, including the antimicrobial action of metal nanoclusters (NCs). The review concludes with a discussion of the restrictions on present studies and future prospects of nanotechnology-based NPs development.

Biostimulation and toxicity: The magnitude of the impact of nanomaterials in microorganisms and plants

Background

Biostimulation and toxicity constitute the continuous response spectrum of a biological organism against physicochemical or biological factors. Among the environmental agents capable of inducing biostimulation or toxicity are nanomaterials. On the < 100 nm scale, nanomaterials impose both physical effects resulting from the core’s and corona’s surface properties, and chemical effects related to the core’s composition and the corona’s functional groups.

Aim of Review

The purpose of this review is to describe the impact of nanomaterials on microorganisms and plants, considering two of the most studied physical and chemical properties: size and concentration.

Key Scientific Concepts of Review

Using a graphical analysis, the presence of a continuous biostimulation-toxicity spectrum is shown considering different biological responses. In microorganisms, the results showed high susceptibility to nanomaterials. Simultaneously, in plants, a hormetic response was found related to nanomaterials concentration and, in a few cases, a positive response in the smaller nanomaterials when these were applied at a higher level. With the above, it is concluded that: (1) microorganisms are more susceptible to nanomaterials than plants, (2) practically all nanomaterials seem to induce responses from biostimulation to toxicity in plants, and (3) the kind of response observed will depend in a complex way on the nanomateriaĺs physical and chemical characteristics, of the biological species with which they interact, and of the form and route of application and on the nature of the medium -soil, soil pore water, and biological surfaces- where the interaction occurs.

Insights on recent approaches in drug discovery strategies and untapped drug targets against drug resistance

BACKGROUND

Despite the various strategies undertaken in the clinical practice, the mortality rate due to antibiotic-resistant microbes has been markedly increasing worldwide. In addition to multidrug-resistant (MDR) microbes, the "ESKAPE" bacteria are also emerging. Of course, the infection caused by ESKAPE cannot be treated even with lethal doses of antibiotics. Now, the drug resistance is also more prevalent in antiviral, anticancer, antimalarial and antifungal chemotherapies.

MAIN BODY

To date, in the literature, the quantum of research reported on the discovery strategies for new antibiotics is remarkable but the milestone is still far away. Considering the need of the updated strategies and drug discovery approaches in the area of drug resistance among researchers, in this communication, we consolidated the insights pertaining to new drug development against drug-resistant microbes. It includes drug discovery void, gene paradox, transposon mutagenesis, vitamin biosynthesis inhibition, use of non-conventional media, host model, target through quorum sensing, genomic-chemical network, synthetic viability to targets, chemical versus biological space, combinational approach, photosensitization, antimicrobial peptides and transcriptome profiling. Furthermore, we optimally briefed about antievolution drugs, nanotheranostics and antimicrobial adjuvants and then followed by twelve selected new feasible drug targets for new drug design against drug resistance. Finally, we have also tabulated the chemical structures of potent molecules against antimicrobial resistance.

CONCLUSION

It is highly recommended to execute the anti-drug resistance research as integrated approach where both molecular and genetic research needs to be as integrative objective of drug discovery. This is time to accelerate new drug discovery research with advanced genetic approaches instead of conventional blind screening.

Nanoparticle-hydrogel superstructures for biomedical applications

The incorporation of nanoparticles into hydrogels yields novel superstructures that have become increasingly popular in biomedical research. Each component of these nanoparticle-hydrogel superstructures can be easily modified, resulting in platforms that are highly tunable and inherently multifunctional. The advantages of the nanoparticle and hydrogel constituents can be synergistically combined, enabling these superstructures to excel in scenarios where employing each component separately may have suboptimal outcomes. In this review, the synthesis and fabrication of different nanoparticle-hydrogel superstructures are discussed, followed by an overview of their use in a range of applications, including drug delivery, detoxification, immune modulation, and tissue engineering. Overall, these platforms hold significant clinical potential, and it is envisioned that future development along these lines will lead to unique solutions for addressing areas of pressing medical need.

Green Synthesized Ag Nanoparticles for Bio-Sensing and Photocatalytic Applications

In this work, sensing and photocatalytic activities of green synthesized silver nanoparticles (Ag NPs) are investigated. Ag NPs have been synthesized by the reduction of silver nitrate (AgNO₃) using different leaf extracts. An optimum surface plasmon resonance (SPR) behavior is obtained for neem leaf extracts because of the presence of a high concentration of diterpenoids, as evidenced from gas chromatography mass spectroscopy results. The underlying mechanism for the formation of Ag NPs is highlighted. The Ag NPs are in spherical shape and exhibit the hexagonal crystal phase and also show a good stability. The biosensing property of the Ag NPs is evaluated using mancozeb (MCZ) agro-fungicide, and the SPR peak position exhibited a linear response with MCZ concentration. The sensitivity is found to be 39.1 nm/mM. Further, the photocatalytic activity of Ag NPs is tested using 0.5 mM MCZ solution as a model under UV-visible illumination. It is observed that photocatalytic activity is caused by the formation of reactive oxygen species. Therefore, the green synthesized Ag NPs are potential candidates for biosensing and photocatalytic applications.

Molecular weight of polyethylenimine-dependent transfusion and selective antimicrobial activity of functional silver nanoparticles

Synthetic cationic polymer-mediated synthesis of silver nanoparticles and selective antimicrobial activity of the same were demonstrated. Polyethyleneimine (PEI)-coated silver nanoparticles showed antimicrobial activity against Acinetobacter baumannii as a function of the polymeric molecular weight (MW) of PEI. Silver nanoparticles were coated with PEI of three different MWs: Ag-NP-1 with PEI exhibiting a MW of 750,000, Ag-NP-2 with PEI exhibiting a MW of 1300, and Ag-NP-3 with PEI exhibiting a MW of 60,000. These nanoparticles showed a particle size distribution of 4-20 nm. The nanoparticles exhibited potent antimicrobial activity against A. baumannii, with the minimum inhibitory concentration of Ag-NP-1, Ag-NP-2, and Ag-NP-3 on the order of 5, 10, and 5 μg/mL, respectively, and minimum bactericidal concentration of Ag-NP-1, Ag-NP-2, and Ag-NP-3 on the order of 10, 20, and 10 μg/mL, respectively. Fluorescence imaging of Ag-NPs revealed selective transfusion of Ag-NPs across the cell membrane as a function of the polymeric MW; differential interaction of the cytoplasmic proteins during antimicrobial activity was observed.

Proteomics approach to understand bacterial antibiotic resistance strategies

Introduction: The understanding of novel antibiotic resistance mechanisms is essential to develop strategies against antibiotic-resistant pathogens, which has become an urgent task due to the worldwide emergence of antibiotic resistance. Areas covered: In this review, the authors summarize the recent progress on antibiotic resistance caused by lab-evolved bacteria and clinical multidrug-resistant bacterial pathogens from the proteomics perspective. Expert opinion: Proteomics provides a new platform for a comprehensive understanding of change in protein pathways that are engaged in antibiotics resistance, which is different from a genetic view that focuses on the role of an individual gene or protein. Further work is required to understand why and how the involved pathways are integrated for surviving antibiotic-mediated killing, to use other OMICs for better comprehension of antibiotic resistance mechanisms, and to develop reprogramming proteomics, which reverts an 'antibiotic resistance proteome' to an 'antibiotic sensitive or antibiotic sensitive-like' proteome, for the control of antibiotic-resistant pathogens.