Chitin-Glucan Complex Hydrogels: Optimization of Gel Formation and Demonstration of Drug Loading and Release Ability

Chitin-glucan complex (CGC) hydrogels were fabricated through a freeze-thaw procedure for biopolymer dissolution in NaOH 5 mol/L, followed by a dialysis step to promote gelation. Compared to a previously reported methodology that included four freeze-thaw cycles, reducing the number of cycles to one had no significant impact on the hydrogels' formation, as well as reducing the total freezing time from 48 to 18 h. The optimized CGC hydrogels exhibited a high and nearly spontaneous swelling ratio (2528 ± 68%) and a water retention capacity of 55 ± 3%, after 2 h incubation in water, at 37 °C. Upon loading with caffeine as a model drug, an enhancement of the mechanical and rheological properties of the hydrogels was achieved. In particular, the compressive modulus was improved from 23.0 ± 0.89 to 120.0 ± 61.64 kPa and the storage modulus increased from 149.9 ± 9.8 to 315.0 ± 76.7 kPa. Although the release profile of caffeine was similar in PBS and NaCl 0.9% solutions, the release rate was influenced by the solutions' pH and ionic strength, being faster in the NaCl solution. These results highlight the potential of CGC based hydrogels as promising structures to be used as drug delivery devices in biomedical applications.

Can Chitin and Chitosan Replace the Lichen Evernia prunastri for Environmental Biomonitoring of Cu and Zn Air Contamination?

This study compared the ability of the lichen Evernia prunastri, chitin and chitosan to take up Cu²⁺ and Zn²⁺. It was hypothesized that chitin and chitosan have an accumulation capacity comparable to the lichen, so that these biopolymers could replace the use of E. prunastri for effective biomonitoring of Cu and Zn air pollution. Samples of the lichen E. prunastri, as well as chitin (from shrimps) and chitosan (from crabs), were incubated with Cu and Zn solutions at concentrations of 0 (control), 10, 25, 50, 75, and 100 µM and analyzed by Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Metal concentrations accumulated by lichen, chitin and chitosan samples were strongly and linearly correlated with the concentrations in the treatment solutions. The lichen always showed significantly higher accumulation values compared to chitin and chitosan, which showed similar accumulation features. The outcomes of this study confirmed the great effectiveness of the lichen Evernia prunastri for environmental biomonitoring and showed that chitin and chitosan have a lower accumulation capacity, thus suggesting that although these biopolymers have the potential for replacing E. prunastri in polluted areas, their suitability may be limited in areas with intermediate or low pollution levels.

Low Temperature Dissolution of Yeast Chitin-Glucan Complex and Characterization of the Regenerated Polymer

Chitin-glucan complex (CGC) is a copolymer composed of chitin and glucan moieties extracted from the cell-walls of several yeasts and fungi. Despite its proven valuable properties, that include antibacterial, antioxidant and anticancer activity, the utilization of CGC in many applications is hindered by its insolubility in water and most solvents. In this study, NaOH/urea solvent systems were used for the first time for solubilization of CGC extracted from the yeast Komagataella pastoris. Different NaOH/urea ratios (6:8, 8:4 and 11:4 (w/w), respectively) were used to obtain aqueous solutions using a freeze/thaw procedure. There was an overall solubilization of 63-68%, with the highest solubilization rate obtained for the highest tested urea concentration (8 wt%). The regenerated polymer, obtained by dialysis of the alkali solutions followed by lyophilization, formed porous macrostructures characterized by a chemical composition similar to that of the starting co-polymer, although the acetylation degree decreased from 61.3% to 33.9-50.6%, indicating that chitin was converted into chitosan, yielding chitosan-glucan complex (ChGC). Consistent with this, there was a reduction of the crystallinity index and thermal degradation temperature. Given these results, this study reports a simple and green procedure to solubilize CGC and obtain aqueous ChGC solutions that can be processed as novel biomaterials.

3D biofilms: in search of the polysaccharides holding together lichen symbioses

Stable, long-term interactions between fungi and algae or cyanobacteria, collectively known as lichens, have repeatedly evolved complex architectures with little resemblance to their component parts. Lacking any central scaffold, the shapes they assume are casts of secreted polymers that cement cells into place, determine the angle of phototropic exposure and regulate water relations. A growing body of evidence suggests that many lichen extracellular polymer matrices harbor unicellular, non-photosynthesizing organisms (UNPOs) not traditionally recognized as lichen symbionts. Understanding organismal input and uptake in this layer is key to interpreting the role UNPOs play in lichen biology. Here, we review both polysaccharide composition determined from whole, pulverized lichens and UNPOs reported from lichens to date. Most reported polysaccharides are thought to be structural cell wall components. The composition of the extracellular matrix is not definitively known. Several lines of evidence suggest some acidic polysaccharides have evaded detection in routine analysis of neutral sugars and may be involved in the extracellular matrix. UNPOs reported from lichens include diverse bacteria and yeasts for which secreted polysaccharides play important biological roles. We conclude by proposing testable hypotheses on the role that symbiont give-and-take in this layer could play in determining or modifying lichen symbiotic outcomes.

Co-production of chitin-glucan complex and xylitol by Komagataella pastoris using glucose and xylose mixtures as carbon source

Komagataella pastoris was cultivated in glucose/xylose mixtures for production of chitin-glucan complex (CGC), a cell-wall polysaccharide. The culture preferred glucose as substrate for growth, resulting in high biomass yields (0.46-0.54g/g). After glucose depletion, xylose was consumed but no cell growth was observed, indicating K. pastoris was unable to use it for growth. Interestingly, concomitant with xylose consumption, xylitol synthesis was noticed, reaching a maximum concentration of 7.64g/L, with a yield on xylose of 0.52g/g. Lower CGC production was reached as the xylose content was increased in the substrate mixtures, due to the lower biomass production. Moreover, cultivation in the presence of xylitol resulted in CGC enriched in chitin with higher molecular weight. These results suggest the possibility of using K. pastoris for the co-production of CGC and xylitol using glucose/xylose-rich substrates. It may also be a strategy to tailor CGC composition and average molecular weight.