Selenium (Se) recovery for technological applications from environmental matrices based on biotic and abiotic mechanisms

Selenium (Se) is an essential element with application in manufacturing from food to medical industries. Water contamination by Se is of concern due to anthropogenic activities. Recently, Se remediation has received increasing attention. Hence, different types of remediation techniques are listed in this work, and their potential for Se recovery is evaluated. Sorption, co-precipitation, coagulation and precipitation are effective for low-cost Se removal. In photocatalytic, zero-valent iron and electrochemical systems, the above mechanisms occur with reduction as an immobilization and detoxification process. In combination with magnetic separation, the above techniques are promising for Se recovery. Biological Se oxyanions reduction has been widely recognized as a cost-effective method for Se remediation, simultaneously generating biosynthetic Se nanoparticles (BioSeNPs). Increasing the extracellular production of BioSeNPs and controlling their morphology will benefit its recovery. However, the mechanism of the microbial production of BioSeNPs is not well understood. Se containing products from both microbial reduction and abiotic methods need to be refined to obtain pure Se. Eco-friendly and cost-effective Se refinery methods need to be developed. Overall, this review offers insight into the necessity of shifting attention from Se remediation to Se recovery.

Selenite reduction by the rhizobacterium Azospirillum brasilense, synthesis of extracellular selenium nanoparticles and their characterisation

Microbial reduction of selenium oxyanions has attracted attention in recent years. In this study, an original and simple method for the synthesis of extracellular selenium nanoparticles (Se NPs) of relatively uniform size has been developed using strains Sp7 and Sp245 of the ubiquitous plant-growth promoting rhizobacterium Azospirillum brasilense, both capable of selenite (SeO₃^2-) reduction. In addition, a reliable purification protocol for the recovery of the Se NPs has been perfected, which could be applied with minor modifications to cultures of other microbial species. Importantly, it was found that, by changing the conditions of bacterial reduction of selenite, extracellularly localised Se NPs can be obtained using bacteria which would otherwise produce intracellular Se NPs. In particular, bacterial cultures grown up to the end of the logarithmic growth phase, washed free of culture medium and then incubated with selenite, were used to obtain extracellular Se NPs. Their sizes depended on the initial selenite concentration (∼25-80 nm in diameter at 50-10 mM selenite, respectively). The Se NPs obtained were characterised by transmission electron microscopy (TEM), dynamic light scattering, as well as Raman and UV-vis spectroscopies. Their zeta potential was found to be negative (ca. minus 21-24 mV). Bacterial selenite reduction was also studied in the presence of the efflux pump inhibitor carbonyl cyanide m-chlorophenylhydrazone (CCCP). In this case, TEM indicated the formation only of intracellular selenium crystallites. The data show that the formation of extracellular Se NPs requires normal bacterial metabolic activity, while CCCP evidently blocks the membrane export of Se⁰ nuclei.

FTIR and Raman spectroscopic studies of selenium nanoparticles synthesised by the bacterium Azospirillum thiophilum

Vibrational (Fourier transform infrared (FTIR) and Raman) spectroscopic techniques can provide unique molecular-level information on the structural and compositional characteristics of complicated biological objects. Thus, their applications in microbiology and related fields are steadily increasing. In this communication, biogenic selenium nanoparticles (Se NPs) were obtained via selenite (SeO₃^2-) reduction by the bacterium Azospirillum thiophilum (strain VKM B-2513) for the first time, using an original methodology for obtaining extracellular NPs. Dynamic light scattering (DLS) and transmission electron microscopy (TEM) showed the Se NPs to have average diameters within 160-250nm; their zeta potential was measured to be minus 18.5mV. Transmission FTIR spectra of the Se NPs separated from bacterial cells showed typical proteinacious, polysaccharide and lipid-related bands, in line with TEM data showing a thin layer covering the Se NPs surface. Raman spectra of dried Se NPs layer in the low-frequency region (under 500cm^-1 down to 150cm^-1) showed a single very strong band with a maximum at 250cm^-1 which, in line with its increased width (ca. 30cm^-1 at half intensity), can be attributed to amorphous elementary Se. Thus, a combination of FTIR and Raman spectroscopic approaches is highly informative in non-destructive analysis of structural and compositional properties of biogenic Se NPs.

Biotransformation and detoxification of selenite by microbial biogenesis of selenium-sulfur nanoparticles

This study combines the interaction between the toxic oxyanions selenite and selenate and the plant growth promoting bacterium Azospirillum brasilense with a comprehensive characterization of the formed selenium particles. As selenium is an essential trace element, but also toxic in high concentrations, its state of occurrence in nature is of major concern. Growth of the bacterium was affected by selenite (1-5mM) only, observable as a prolonged growth lag-phase of 3days. Subsequently, selenite reduction occurred under aerobic conditions resulting in extracellularly formed insoluble Se⁰ particles. Complementary studies by microscopic and spectroscopic techniques revealed the particles to be homogeneous and stable Se_8-nS_n structured spheres with an average size of 400nm and highly negative surface charge of -18mV in the neutral pH range. As this is the first study showing Azospirillum brasilense being able to biotransform selenite to selenium particles containing a certain amount of sulfur, even if environmental waters supplemented with selenite were used, they may significantly contribute to the biogeochemical cycling of both elements in soil as well as to their soil-plant transfer. Therefore, microbial biotransformation of selenite under certain circumstances may be used for various bio-remediation and bio-technological applications.

Proteins in microbial synthesis of selenium nanoparticles

Biogenic formation of nano-sized particles composed of various materials (in particular, selenium) by live microorganisms is widespread in nature. This phenomenon has been increasingly attracting the attention of researchers over the last decade not only owing to a range of diverse applications of such nanoparticles (NPs) in nanobiotechnology, but also because of the specificity of methodologies and mechanisms of NPs formation related to "green synthesis". In this mini-review, recent data are discussed on the multifaceted role of proteins in the processes of microbial reduction of selenium oxyanions and the formation of Se NPs. Besides the involvement of proteins in reducing selenites and selenates, their participation in the microbially driven growth and stabilisation of Se NPs is analysed, which results in the formation of unique nanostructured materials differing from those obtained chemically. This mini-review is thus focussed on proteins involved in microbial synthesis of Se NPs and on instrumental analysis of these processes and their products (biogenic nanostructured selenium particles functionalised by a surface-capping layer of various biomacromolecules).

Gold(III) reduction by the rhizobacterium Azospirillum brasilense with the formation of gold nanoparticles

For the soil nitrogen-fixing bacterium Azospirillum brasilense, the ability to reduce [AuCl4](-) and to form gold nanoparticles (GNPs) has been demonstrated, with the appearance of a mauve tint of the culture. To validate the shapes and chemical nature of nanoparticles, transmission electron microscopy (TEM) and X-ray fluorescence analysis were used. For the widely studied agriculturally important wild-type strains A. brasilense Sp7 and Sp245, GNPs formed after 10 days of incubation of cell biomass with 0.25 mM [AuCl4](-) were shown (using TEM) to be mainly of spherical form (5 to 20 nm in diameter), with rare occasional triangles. In the course of cultivation with [AuCl4](-), after 5 days, a mauve tint was already visible for cells of strain Sp245.5, after 6 days for Sp245 and after 10 days for Sp7. Thus, for the mutant strain Sp245.5 (which has significant differences in the structure and composition of cell-surface polysaccharides as compared with Sp245), a more rapid formation of GNPs was observed. Moreover, their TEM images (also obtained after 10 days) showed different shapes: nano-sized spheres, triangles, hexagons and rods, as well as larger round-shaped flower-like nanoparticles about 100 nm in size. Since by the time of GNP formation in our experiments the cells were found to be already not viable, this confirms the dominating role of cell surface structure and chemical composition in shaping the GNPs formed in the course of [AuCl4](-) reduction to Au(0). This finding may be useful for understanding the natural biogeochemical mechanisms of gold reduction and formation of GNPs involving microorganisms. The data obtained may also help in developing protocols for environmentally friendly synthesis of nanoparticles and possible use of bacterial cells with modified surface structure and composition for their fabrication.