Green Deep Eutectic Solvents (DESs) for Sustainable Metal Recovery from Thermally Treated PCBs: A Greener Alternative to Conventional Methods

Waste PCBs the core of e-waste is rich in copper, tin, zinc, iron, and nickel. Leaching base metals from PCB used to be done in toxic, corrosive acidic/alkali mediums. In this work, an environmentally friendly method for leaching metals from thermally treated PCBs (TPCBs) of mobile phones was proposed using choline chloride based deep eutectic solvents (DES). DES selectivity and solubility of metals from metal oxides were the main screening criteria. FA-ChCl had the maximum solubility of Cu, Fe, and Ni, while Urea-ChCl had high Zn selectivity and solubility. Oxalic acid has high selectivity for Sn. FA-ChCl extracted Cu and Fe best at 16 h, 100 °C, and 1/30 g/mL. Urea-ChCl extracted Zn (90.4±2.9 %) from TPCBs at 100 °C, 21 h, 1/20 g/mL, and 400 rpm. Oxalic acid (1 M) removed 92.3±2.1 % Sn from TPCBs in 1 h at 80 °C and 1/20 g/mL. The shrinking core model-based kinetic investigation of FA-ChCl for Cu extraction showed a diffusion-controlled process. The proposed method is greener than mineral acids utilized for metal extraction.

Sm/Co Magnetic Materials: A Recycling Strategy Using Modifiable Hydrophobic Deep Eutectic Solvents Based on Trioctylphosphine Oxide

Hydrophobic deep eutectic solvents (HDES) are widely used as extractants. Usually, when preparing HDES, only the extraction ability of one component is taken into account, with the second serving as an "inert" component, whose effect on the extraction process is not taken into account. The present study demonstrates the possibility of controlling the selectivity of a hydrophobic deep eutectic solvent based on trioctylphosphine oxide (TOPO) by varying the substance that acts as a hydrogen bond donor, but which does not have an extractive ability. In the course of the work, the influence of the "inert" component on the physicochemical and extraction properties of HDES was confirmed by experimental, spectroscopic, and also calculation methods. A number of phenols with different structural features were chosen as the HDES' hydrogen bond donors to modify: phenol (Ph), para-tert-butylphenol (PTBP) and thymol (Th). Using the example of separation of the Sm/Co pair, the influence of the structure of a hydrogen bond donor on the extraction ability of a hydrophobic deep eutectic solvent was established, where the degree of extraction of Sm (III) increased in the series Th:TOPO < PTBP:TOPO < Ph:TOPO. HDES based on TOPO and phenols can potentially be used to separate Sm and Co from the process leach solutions generated during the hydrometallurgical processing of waste SmCo magnets.

Application of Hydrophobic Deep Eutectic Solvents in Extraction of Metals from Real Solutions Obtained by Leaching Cathodes from End-of-Life Li-Ion Batteries

This paper presents the results of applying hydrophobic deep eutectic solvents (HDESs) for the extraction of metal ions from a real hydrochloric acid solution after leaching the cathodes of three different types of Li-ion batteries. Aliquat 336-, D2EHPA- and menthol-based HDESs developed by us were used in this study. The optimal HCl leaching conditions chosen are 80 °C, 2 M HCl, 6 h, solid:liquid ratio = 1:25. The results of stepwise separation of the major elements using extraction with HDESs are presented. The HDESs used in the cross-current extraction made it possible to extract all elements with extraction ratios above 98%. It was shown that the suggested method could potentially be used in the process of recycling end-of-life Li-ion batteries.