Ultra-small CeO2 nanoparticles supported on SiO2 for indoor formaldehyde oxidation at low temperature

Ultra-small CeO₂ nanocrystals with a size of 2.5 nm were synthesized for high efficiency HCHO oxidation at low temperature.

Processing Iron Oxide Nanoparticle-Loaded Composite Carbon Fiber and the Photosensitivity Characterization

In this work, iron oxide nanoparticle loaded carbon fibers were prepared by electrohydrodynamic co-casting a polymer and particle mixture followed by carbonization. The precursor used to generate carbon fibers was a linear molecular chain polymer: polyacrylonitrile (PAN). A solution containing iron (II, III) oxide (Fe3O4) particles and the PAN polymer dissolved in dimethylformamide (DMF) was electrohydrodynamically co-cast into fibers. The fibers were stabilized in air and carbonized in hydrogen at elevated temperatures. The microstructure and composition of the fibers were analyzed using scanning electron microscopy (SEM). A quantitative metallographic analysis method was used to determine the fiber size. It was found that the iron (II, III) oxide particles distributed uniformly within the carbonized fibers. Photosensitivity of the particle containing fibers was characterized through measuring the open circuit potential of the fiber samples under the visible light illumination. Potential applications of the fibers for photovoltaics and photonic sensing were discussed.

Enhancement of H2O2 Decomposition by the Co-catalytic Effect of WS2 on the Fenton Reaction for the Synchronous Reduction of Cr(VI) and Remediation of Phenol

The greatest problem in the Fe(II)/H₂O₂ Fenton reaction is the low production of ·OH owing to the inefficient Fe(III)/Fe(II) cycle and the low decomposition efficiency of H₂O₂ (<30%). Herein, we report a new discovery regarding the significant co-catalytic effect of WS₂ on the decomposition of H₂O₂ in a photoassisted Fe(II)/H₂O₂ Fenton system. With the help of WS₂ co-catalytic effect, the H₂O₂ decomposition efficiency can be increased from 22.9% to 60.1%, such that minimal concentrations of H₂O₂ (0.4 mmol/L) and Fe²⁺ (0.14 mmol/L) are necessary for the standard Fenton reaction. Interestingly, the co-catalytic Fenton strategy can be applied to the simultaneous oxidation of phenol (10 mg/L) and reduction of Cr(VI) (40 mg/L), and the corresponding degradation and reduction rates can reach up to 80.9% and 90.9%, respectively, which are much higher than the conventional Fenton reaction (52.0% and 31.0%). We found that the expose reductive W⁴⁺ active sites on the surface of WS₂ can greatly accelerate the rate-limiting step of Fe³⁺/Fe²⁺ conversion, which plays the key role in the decomposition of H₂O₂ and the reduction of Cr(VI). Our discovery represents a breakthrough in the field of inorganic catalyzing AOPs and greatly advances the practical utility of this method for environmental applications.