Transition-Metal Catalyzed Synthesis of Pyrimidines: Recent Advances, Mechanism, Scope and Future Perspectives

Pyrimidine is a pharmacologically important moiety that exhibits diverse biological activities. This review reflects the growing significance of transition metal-catalyzed reactions for the synthesis of pyrimidines (with no discussion being made on the transition metal-catalyzed functionalization of pyrimidines). The effect of different catalysts on the selectivity/yields of pyrimidines and catalyst recyclability (wherever applicable) are described, together with attempts to illustrate the role of the catalyst through mechanisms. Although several methods have been researched for synthesizing this privileged scaffold, there has been a considerable push to expand transition metal-catalyzed, sustainable, efficient and selective synthetic strategies leading to pyrimidines. The aim of the authors with this update (2017-2023) is to drive the designing of new transition metal-mediated protocols for pyrimidine synthesis.

Ion-Induced Polysaccharide Gelation: Peculiarities of Alginate Egg-Box Association with Different Divalent Cations

Structural aspects of polysaccharide hydrogels based on sodium alginate and divalent cations Ba²⁺, Ca²⁺, Sr²⁺, Cu²⁺, Zn²⁺, Ni²⁺ and Mn²⁺ was studied using data on hydrogel elemental composition and combinatorial analysis of the primary structure of alginate chains. It was shown that the elemental composition of hydrogels in the form of freezing dried microspheres gives information on the structure of junction zones in the polysaccharide hydrogel network, the degree of filling of egg-box cells by cations, the type and magnitude of the interaction of cations with alginate chains, the most preferred types of alginate egg-box cells for cation binding and the nature of alginate dimers binding in junction zones. It was ascertained that metal-alginate complexes have more complicated organization than was previously desired. It was revealed that in metal-alginate hydrogels, the number of cations of various metals per C12 block may be less than the limiting theoretical value equal to 1 for completely filled cells. In the case of alkaline earth metals and zinc, this number is equal to 0.3 for calcium, 0.6 for barium and zinc and 0.65-0.7 for strontium. We have determined that in the presence of transition metals copper, nickel and manganese, a structure similar to an egg-box is formed with completely filled cells. It was determined that in nickel-alginate and copper-alginate microspheres, the cross-linking of alginate chains and formation of ordered egg-box structures with completely filled cells are carried out by hydrated metal complexes with complicated composition. It was found that an additional characteristic of complex formation with manganese cations is the partial destruction of alginate chains. It has been established that the existence of unequal binding sites of metal ions with alginate chains can lead to the appearance of ordered secondary structures due to the physical sorption of metal ions and their compounds from the environment. It was shown that hydrogels based on calcium alginate are most promising for absorbent engineering in environmental and other modern technologies.

Homogeneous Manganese-Catalyzed Hydrofunctionalizations of Alkenes and Alkynes: Catalytic and Mechanistic Tendencies

In recent years, many manganese-based homogeneous catalytic precursors have been developed as powerful alternatives in organic synthesis. Among these, the hydrofunctionalizations of unsaturated C-C bonds correspond to outstanding ways to afford compounds with more versatile functional groups, which are commonly used as building blocks in the production of fine chemicals and feedstock for the industrial field. Herein, we present an account of the Mn-catalyzed homogeneous hydrofunctionalizations of alkenes and alkynes with the main objective of finding catalytic and mechanistic tendencies that could serve as a platform for the works to come.

Heavy Alkali Metal Manganate Complexes: Synthesis, Structures and Solvent-Induced Dissociation Effects

Rare examples of heavier alkali metal manganates [{(AM)Mn(CH₂ SiMe₃ )(N^'Ar )₂ }_∞ ] (AM=K, Rb, or Cs) [N^'Ar =N(SiMe₃ )(Dipp), where Dipp=2,6-iPr₂ -C₆ H₃ ] have been synthesised with the Rb and Cs examples crystallographically characterised. These heaviest manganates crystallise as polymeric zig-zag chains propagated by AM⋅⋅⋅π-arene interactions. Key to their preparation is to avoid Lewis base donor solvents. In contrast, using multidentate nitrogen donors encourages ligand scrambling leading to redistribution of these bimetallic manganate compounds into their corresponding homometallic species as witnessed for the complete Li - Cs series. Adding to the few known crystallographically characterised unsolvated and solvated rubidium and caesium s-block metal amides, six new derivatives ([{AM(N^'Ar )}_∞ ], [{AM(N^'Ar )⋅TMEDA}_∞ ], and [{AM(N^'Ar )⋅PMDETA}_∞ ] where AM=Rb or Cs) have been structurally authenticated. Utilising monodentate diethyl ether as a donor, it was also possible to isolate and crystallographically characterise sodium manganate [(Et₂ O)₂ Na(ⁿ Bu)Mn[(N^'Ar )₂ ], a monomeric, dinuclear structure prevented from aggregating by two blocking ether ligands bound to sodium.

Homogeneous Carbon Capture and Catalytic Hydrogenation: Toward a Chemical Hydrogen Battery System

Recent developments of CO₂ capture and subsequent catalytic hydrogenation to C1 products are discussed and evaluated in this Perspective. Such processes can become a crucial part of a more sustainable energy economy in the future. The individual steps of this catalytic carbon capture and usage (CCU) approach also provide the basis for chemical hydrogen batteries. Here, specifically the reversible CO₂/formic acid (or bicarbonate/formate salts) system is presented, and the utilized catalysts are discussed.

Manganese-catalyzed hydrogenation, dehydrogenation, and hydroelementation reactions

The emerging field of organometallic catalysis has shifted towards research on Earth-abundant transition metals due to their ready availability, economic advantage, and novel properties. In this case, manganese, the third most abundant transition-metal in the Earth's crust, has emerged as one of the leading competitors. Accordingly, a large number of molecularly-defined Mn-complexes has been synthesized and employed for hydrogenation, dehydrogenation, and hydroelementation reactions. In this regard, catalyst design is based on three pillars, namely, metal-ligand bifunctionality, ligand hemilability, and redox activity. Indeed, the developed catalysts not only differ in the number of chelating atoms they possess but also their working principles, thereby leading to different turnover numbers for product molecules. Hence, the critical assessment of molecularly defined manganese catalysts in terms of chelating atoms, reaction conditions, mechanistic pathway, and product turnover number is significant. Herein, we analyze manganese complexes for their catalytic activity, versatility to allow multiple transformations and their routes to convert substrates to target molecules. This article will also be helpful to get significant insight into ligand design, thereby aiding catalysis design.

Cu/Mn catalyzed C-N cross coupling reaction of aryl chlorides and amines promoted by PAMAM dendrimer

A bimetallic catalytic combinations of Mn(OAc)2 and Cu(OAc)2 was found to be significantly effective for the Buchwald type C-N cross coupling of arylchlorides and amines. Reaction is highly influenced in the presence of a promoter Poly(amidoamine) (PAMAM) dendrimer which also possesses the advantages of being stabile, non-toxic, biocompatible, non-immunogenic and acts as soluble support for transition metal complex. Although, Mn is low cost and environmentally benign, but it is not fully exploited due to its low intrinsic catalytic activity. Here, the catalytic potential of Mn was drastically increased in the presence of another metal salt (Cu(OAc)2). In bimetallic composition, Mn significantly influences the activity, selectivity and plays a vital role in catalysis. Herein, we have developed a novel, green and economical procedure for the Buchwald type C-N cross coupling of arylchlorides and amines. Presented coupling method works under aerobic and solvent-free conditions and produces an excellent yield of value-added N-arylated or alkylated products.

Manganese-catalyzed transfer semihydrogenation of internal alkynes to E-alkenes with iPrOH as hydrogen source

The Mn-catalyzed transfer semihydrogenation of internal alkynes to E-alkenes is reported herein, along with Mn-catalyzed hydration of α-keto alkynes. Mechanistic studies displayed an asymmetrical Mn-hydride species performing the catalytic turnover.

Hydroboration of Nitriles, Esters, and Carbonates Catalyzed by Simple Earth-Abundant Metal Triflate Salts

During the past decade earth-abundant metals have become increasingly important in homogeneous catalysis. One of the reactions in which earth-abundant metals have found important applications is the hydroboration of unsaturated C-C and C-X bonds (X=O or N). Within these set of transformations, the hydroboration of challenging substrates such as nitriles, carbonates and esters still remain difficult and often relies on elaborate ligand designs and highly reactive catalysts (e. g., metal alkyls/hydrides). Here we report an effective methodology for the hydroboration of challenging C≡N and C=O bonds that is simple and applicable to a wide set of substrates. The methodology is based on using a manganese(II) triflate salt that, in combination with commercially available potassium tert-butoxide and pinacolborane, catalyzes the hydroboration of nitriles, carbonates, and esters at room temperature and with near quantitative yields in less than three hours. Additional studies demonstrated that other earth-abundant metal triflate salts can facilitate this reaction as well, which is further discussed in this report.

Manganese-Catalyzed Hydroboration of Terminal Olefins and Metal-Dependent Selectivity in Internal Olefin Isomerization-Hydroboration

In the past decade, the use of earth-abundant metals in homogeneous catalysis has flourished. In particular, metals such as cobalt and iron have been used extensively in reductive transformations including hydrogenation, hydroboration, and hydrosilylation. Manganese, on the other hand, has been considerably less explored in these reductive transformations. Here, we report a well-defined manganese complex, [Mn(^iPrBDI)(OTf)₂] (2a; BDI = bipyridinediimine), that is an active precatalyst in the hydroboration of a variety of electronically differentiated alkenes (>20 examples). The hydroboration is specifically selective for terminal alkenes and occurs with exclusive anti-Markovnikov selectivity. In contrast, when using the analogous cobalt complex [Co(^iPrBDI)(OTf)₂] (3a), internal alkenes are hydroborated efficiently, where a sequence of isomerization steps ultimately leads to their hydroboration. The contrasting terminal versus internal alkene selectivity for manganese and cobalt was investigated computationally and is further discussed in the herein-reported study.

Manganese-Catalyzed β-Methylation of Alcohols by Methanol

We report an earth-abundant-metal-catalyzed double and single methylation of alcohols. A manganese catalyst, which operates at low catalyst loadings and short reaction times, mediates these reactions efficiently. A broad scope of primary and secondary alcohols, including purely aliphatic examples, and 1,2-aminoalcohols can be methylated. Furthermore, alcohol methylation for the synthesis of pharmaceuticals has been demonstrated. The catalyst system tolerates many functional groups among them hydrogenation-sensitive examples and upscaling is easily achieved. Mechanistic investigations are indicative of a borrowing hydrogen or hydrogen autotransfer mechanism involving a bimetallic K-Mn catalyst. The catalyst accepts hydrogen as a proton and a hydride from alcohols efficiently and reacts with a chalcone via hydride transfer.

Regiodivergent hydrosilylation, hydrogenation, [2π + 2π]-cycloaddition and C-H borylation using counterion activated earth-abundant metal catalysis

The widespread adoption of earth-abundant metal catalysis lags behind that of the second- and third-row transition metals due to the often challenging practical requirements needed to generate the active low oxidation-state catalysts. Here we report the development of a single endogenous activation protocol across five reaction classes using both iron- and cobalt pre-catalysts. This simple catalytic manifold uses commercially available, bench-stable iron- or cobalt tetrafluoroborate salts to perform regiodivergent alkene and alkyne hydrosilylation, 1,3-diene hydrosilylation, hydrogenation, [2π + 2π]-cycloaddition and C-H borylation. The activation protocol proceeds by fluoride dissociation from the counterion, in situ formation of a hydridic activator and generation of a low oxidation-state catalyst.

Earth-Abundant Metal Catalysis Enabled by Counterion Activation

A precatalyst activation strategy has been developed for earth-abundant metal catalysis enabled by counterion dissociation and demonstrated through alkene hydroboration. Commercially available iron and cobalt tetrafluoroborate salts were found to catalyze the hydroboration of aryl and alkyl alkenes with good functional group tolerance (Fe, 12 substrates; Co, 13 substrates) with three structurally distinct ligands. Key to this endogenous activation was counterion dissociation to generate fluoride which indirectly activates the precatalyst by reaction with pinacol borane.

Development and mechanistic investigation of the manganese(iii) salen-catalyzed dehydrogenation of alcohols

Manganese(iii) salen has been developed as a new catalytic motif for alcohol dehydrogenation and the mechanism has been elucidated.

The first example of a manganese(iii) catalyst for the acceptorless dehydrogenation of alcohols is presented. N,N′-Bis(salicylidene)-1,2-cyclohexanediaminomanganese(iii) chloride (2) has been shown to catalyze the direct synthesis of imines from a variety of alcohols and amines with the liberation of hydrogen gas. The mechanism has been investigated experimentally with labelled substrates and theoretically with DFT calculations. The results indicate a metal–ligand bifunctional pathway in which both imine groups in the salen ligand are first reduced to form a manganese(iii) amido complex as the catalytically active species. Dehydrogenation of the alcohol then takes place by a stepwise outer-sphere hydrogen transfer generating a manganese(iii) salan hydride from which hydrogen gas is released.

The Emergence of Manganese-Based Carbonyl Hydrosilylation Catalysts

In recent years, interest in homogeneous manganese catalyst development has intensified because of the earth-abundant and nontoxic nature of this metal. Although compounds of Mn have largely been utilized for epoxidation reactions, recent efforts have revealed that Mn catalysts can mediate a broad range of reductive transformations. Low-valent Mn compounds have proven to be particularly effective for the hydrosilylation of carbonyl- and carboxylate-containing substrates, and this Account aims to highlight my research group's contributions to this field. In our initial 2014 communication, we reported that the bis(imino)pyridine-supported compound (^Ph2PPrPDI)Mn mediates ketone hydrosilylation with exceptional activity under solvent-free conditions. Silanes including Ph₂SiH₂, (EtO)₃SiH, (EtO)₂MeSiH, and (EtO)Me₂SiH were found to partially reduce cyclohexanone in the presence of (^Ph2PPrPDI)Mn, while turnover frequencies of up to 1280 min^-1 were observed using PhSiH₃. This led us to evaluate the hydrosilylation of 11 additional ketones and allowed for the atom-efficient preparation of tertiary and quaternary silanes. At that time, it was also discovered that (^Ph2PPrPDI)Mn catalyzes the dihydrosilylation of esters (by way of acyl C-O bond hydrosilylation) to yield a mixture of silyl ethers with modest activity. Earlier this year, the scope of these transformations was extended to aldehydes and formates, and the observed hydrosilylation activities are among the highest obtained for any transition-metal catalyst. The effectiveness of three related catalysts has also been evaluated: (^Ph2PPrPDI)MnH, (^PyEtPDEA)Mn, and [(^Ph2PEtPDI)Mn]₂. To our surprise, (^Ph2PPrPDI)MnH was found to exhibit higher carboxylate dihydrosilylation activity than (^Ph2PPrPDI)Mn, while (^PyEtPDEA)Mn demonstrated remarkable carbonyl hydrosilylation activity considering that it lacks a redox-active supporting ligand. The evaluation of [(^Ph2PEtPDI)Mn]₂ revealed competitive aldehyde hydrosilylation and formate dihydrosilylation turnover frequencies; however, this catalyst is significantly inhibited by pyridine and alkene donor groups. In our efforts to fully understand how (^Ph2PPrPDI)Mn operates, a thorough electronic structure evaluation was conducted, and the ground-state doublet calculated for this compound was found to exhibit nonclassical features consistent with a low-spin Mn(II) center supported by a singlet PDI dianion and an intermediate-spin Mn(II) configuration featuring antiferromagnetic coupling to PDI diradical dianion. A comprehensive mechanistic investigation of (^Ph2PPrPDI)Mn- and (^Ph2PPrPDI)MnH-mediated hydrosilylation has revealed two operable pathways, a modified Ojima pathway that is more active for carbonyl hydrosilylation and an insertion pathway that is more effective for carboxylate reduction. Although these efforts represent a small fraction of the recent advances made in Mn catalysis, this work has proven to be influential for the development of Mn-based reduction catalysts and is likely to inform future efforts to develop Mn catalysts that can be used to prepare silicones.

Manganese-mediated/-catalyzed oxidative carboazidation of acrylamides

Manganese-mediated/-catalyzed oxidative carboazidation of acrylamides was developed for the synthesis of various azido oxindoles.

Oxidation of Alkanes by Periodate Using a MnV Nitrido Complex as Catalyst

The design of catalytic systems that can selectively oxidize unactivated C-H bonds under mild conditions is a challenge to chemists. We report here that the manganese(V) nitrido complex [Mn^V (N)(CN)₄ ]^2- is a highly efficient catalyst for the oxidation of alkanes by periodate (IO₄^- ) at ambient conditions. Excellent yields of alcohols and ketones (>95 %) are obtained with a maximum turnover number (TON) of 3000.

Catalytic C-H bond functionalisation chemistry: the case for quasi-heterogeneous catalysis

This feature article examines the potential of heterogeneous Pd species to mediate catalytic C-H bond functionalisation processes employing suitable substrates (e.g. aromatic/heteroaromatic compounds). A focus is placed on the reactivity of supported and non-supported Pd nanoparticle (PdNPs) catalysts, in addition to the re-appropriation of well-established heterogeneous Pd catalysts such as Pd/C. Where possible, reasonable comparisons are made between PdNPs and traditional 'homogeneous' Pd precatalyst sources (which form PdNPs). The involvement of higher order Pd species in traditional cross-coupling processes, such as Mizoroki-Heck, Sonogashira and Suzuki-Miyaura reactions, allows the exemplification of potential future topics for study in the area of catalytic C-H bond functionalisation processes.

Selective reduction of carboxylic acids to aldehydes through manganese catalysed hydrosilylation

The direct reduction of carboxylic acids to disilylacetals was achieved through a manganese catalyzed hydrosilylation reaction in the presence of triethylsilane under mild conditions, at r.t. and under UV irradiation (350 nm). The aldehydes were obtained in good to excellent yields after acidic hydrolysis.

Mn(ii) acetate: an efficient and versatile oxidation catalyst for alcohols

A homogeneous catalytic system consisting of Mn(ii) acetate, tert-butylhydroperoxide, acetonitrile and trifluoroacetic acid oxidises various alcohols efficiently and selectively.