Calcitic-based stones protection by a low-fluorine modified methacrylic coating

Atmospheric pollutants, such as NOx, SO2, and particulate matter, together with water percolation inside the stone pores, represent the main causes of cultural heritage decay. In order to avoid these undesired phenomena, the application of protective coatings represents a reliable solution. In this context, the present study focused on the synthesis of low-fluorine content methacrylic-based (MMA) polymeric resins characterized by seven F atoms (namely F7 monomer) in the lateral chains. Four different percentages (1.0, 2.5, 5.0, and 10.0%) of the present monomer were adopted to obtain a final polymeric structure showing the desired hydrophobicity, processability, and structural and thermal stability (even after accelerated UV aging tests). MMA_F7(1.0) seemed to be the optimal one; therefore, it was further applied onto Candoglia marble. Specifically, the treated substrates showed good surface hydrophobicity, water repellency, and water vapor transpirability. No color variation was observed even after a 1.5-year exposure in a real polluted environment (Monza Cathedral). Interestingly, the application of this coating hindered the atmospheric nitrates penetration inside the stones and, at the same time, it limited the sulfates (gypsum) formation, thus revealing a very promising marbles protection resin.

Chemical grafting fluoropolymer on cellulose nanocrystals and its rheological modification to perfluoropolyether oil

Cellulose nanocrystal (CNC) is the sustainable nanoparticle derived from natural cellulose, widely used as the functional additive to tailor the properties and performances of diverse matters. This study attempted the application of CNC as the rheological modifier in fluorocarbon lubricating oil (perfluoropolyether, PFPE). To solve the incompatibility between cellulose and base oil, fluoropolymer was covalently grafted onto the surface of nanocrystals by living radical polymerization. The introduction of modified cellulose nanocrystals exhibited significant thickening effect to PFPE-based hybrid oils, with the increase on viscosity, improved thixotropy performance and enhanced storage modulus (G') and loss modulus (G″). In particular, when adding 10-15 wt% modified nanocrystals, a transition of G' > G″ from the flowable state to grease-like state appeared in hybrid oils, attributed to the formation of stable subnetwork based on the chain entanglement of the grafted fluoropolymer and PFPE oil.

Enhanced Historical Limestone Protection by New Organic/Inorganic Additive-Modified Resins

The Cultural Heritage deterioration is a spontaneous decay process due to water percolation and air pollutant deposition. In this context, novel acrylic (Twinswet, TW) and siloxane-based (Alpha®SI30) resins were exploited starting from commercial products and then modified by adding either a commercial polysiloxane-based additive (TegoPhobe 1500N) or a precursor of SiO2 nanoparticles (Tetraethyl ortosilicate, TEOS) to improve the Vicenza stone surface hydrophobicity. Properties of the coated materials were studied using different techniques such as water contact angle (WCA), capillary absorption, colorimetric and water vapor permeability measurements. Accelerated UV aging and eight-month outdoor exposure tests (at Milan University campus) were also performed to determine the coatings durability. Notably, the addition of both additives slightly enhanced the surface hydrophobicity resulting in WCAs of about 140°, and decreased the water absorption especially for Alpha-based resins. Conversely, a reduction of water vapor permeability was observed, even if within the threshold value of 50%. Concerning the color variation, Alpha®SI30 preserved the stone external aspect; instead, TW smoothly modified the surface color. All of the studied coatings were stable to both UV aging and outdoor exposure. Hence, the present modified commercial coatings revealed to be very promising for the protection of historical monuments.

Towards Novel Fluorinated Methacrylic Coatings for Cultural Heritage: A Combined Polymers and Surfaces Chemistry Study

In this work, new co- and ter-polymers of methyl methacrylate (MMA), ethyl methacrylate (EMA), and N-butyl methacrylate (nBuMA), containing just 1% mol × mol⁻¹ of a fluorinated co-monomer, 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluoro-octyl methacrylate (POMA), were synthesized. After an UV accelerated aging test, the photo-chemical stability of the polymers prepared was determined by ¹H NMR and FT-IR spectroscopy, size exclusion chromatography, differential scanning calorimetry and wettability measurements. The polymers were applied to Botticino tiles to achieve better performances in terms of water repellency and consequently deterioration resistance. One-year prolonged exposure to a real environment was conducted and the properties of the coated materials and their performances were studied using different surface techniques such as water contact angle (WCA) and colorimetric measurements (CIELaB), capillary absorption, permeability (RVP) tests and soluble salts determination. The effectiveness of the fluorinated methacrylic coatings was clearly demonstrated; among all the resins, the co-polymer MMA_POMA seems to be the most performing one. Furthermore, both the UV photo-chemical resistance and the easiness of removal was successfully studied.