RAPD markers for screening shoot gall maker (Betousa stylophora Swinhoe) tolerant genotypes of amla (Phyllanthus emblica L.)

Phyllanthus emblica Linn. is the most important medicinally useful tree crop in Asian Subcontinent and is severely infested by Betousa stylophora Swinhoe, known as shoot gall maker (SGM). This pest tunnels the shoots of seedlings and actively growing branches of trees and develops gall, leading to stunted growth, unusual branching and death of actively growing shoots. Our study revealed that trees possessing smooth bark were free from the attack of this pest than those with rough bark surface. Unfortunately, this character is not detectable either at seedling stage or during early growth of trees in the orchard. RAPD genetic fingerprinting of trees possessing smooth and rough bark revealed distinguishable and highly reproducible DNA banding pattern between the two genotypes. Of the 20 RAPD primers tested, five of them produced distinguishable RAPD bands between rough and smooth barked genotypes of P. emblica. Trees with smooth bark produced five unique RAPD bands with molecular weight ranging from 350 bp to 1500 bp and those with rough bark produced six RAPD bands (350 bp–650 bp) to utilize these DNA bands as potential DNA marker for screening tolerant genotypes of this crop against SGM. The utility of this finding in genetic improvement of this tree crop against SGM is discussed.

Development of genetic markers in Eucalyptus species by target enrichment and exome sequencing

The advent of next-generation sequencing has facilitated large-scale discovery, validation and assessment of genetic markers for high density genotyping. The present study was undertaken to identify markers in genes supposedly related to wood property traits in three Eucalyptus species. Ninety four genes involved in xylogenesis were selected for hybridization probe based nuclear genomic DNA target enrichment and exome sequencing. Genomic DNA was isolated from the leaf tissues and used for on-array probe hybridization followed by Illumina sequencing. The raw sequence reads were trimmed and high-quality reads were mapped to the E. grandis reference sequence and the presence of single nucleotide variants (SNVs) and insertions/ deletions (InDels) were identified across the three species. The average read coverage was 216X and a total of 2294 SNVs and 479 InDels were discovered in E. camaldulensis, 2383 SNVs and 518 InDels in E. tereticornis, and 1228 SNVs and 409 InDels in E. grandis. Additionally, SNV calling and InDel detection were conducted in pair-wise comparisons of E. tereticornis vs. E. grandis, E. camaldulensis vs. E. tereticornis and E. camaldulensis vs. E. grandis. This study presents an efficient and high throughput method on development of genetic markers for family– based QTL and association analysis in Eucalyptus.

The first genetic linkage map of Eucommia ulmoides

In accordance with pseudo-testcross strategy, the first genetic linkage map of Eucommia ulmoides Oliv. was constructed by an F1 population of 122 plants using amplified fragment length polymorphism (AFLP) markers. A total of 22 AFLP primer combinations generated 363 polymorphic markers. We selected 289 markers segregating as 1:1 and used them for constructing the parent-specific linkage maps. Among the candidate markers, 127 markers were placed on the maternal map LF and 108 markers on the paternal map Q1. The maternal map LF spanned 1116.1 cM in 14 linkage groups with a mean map distance of 8.78 cM; the paternal map Q1 spanned 929.6 cM in 12 linkage groups with an average spacing of 8.61 cM. The estimated coverage of the genome through two methods was 78.5 and 73.9% for LF, and 76.8 and 71.2% for Q1, respectively. This map is the first linkage map of E. ulmoides and provides a basis for mapping quantitative-trait loci and breeding applications.

Genomic characterization of DArT markers based on high-density linkage analysis and physical mapping to the Eucalyptus genome

Diversity Arrays Technology (DArT) provides a robust, high throughput, cost-effective method to query thousands of sequence polymorphisms in a single assay. Despite the extensive use of this genotyping platform for numerous plant species, little is known regarding the sequence attributes and genome-wide distribution of DArT markers. We investigated the genomic properties of the 7,680 DArT marker probes of a Eucalyptus array, by sequencing them, constructing a high density linkage map and carrying out detailed physical mapping analyses to the Eucalyptus grandis reference genome. A consensus linkage map with 2,274 DArT markers anchored to 210 microsatellites and a framework map, with improved support for ordering, displayed extensive collinearity with the genome sequence. Only 1.4 Mbp of the 75 Mbp of still unplaced scaffold sequence was captured by 45 linkage mapped but physically unaligned markers to the 11 main Eucalyptus pseudochromosomes, providing compelling evidence for the quality and completeness of the current Eucalyptus genome assembly. A highly significant correspondence was found between the locations of DArT markers and predicted gene models, while most of the 89 DArT probes unaligned to the genome correspond to sequences likely absent in E. grandis, consistent with the pan-genomic feature of this multi-Eucalyptus species DArT array. These comprehensive linkage-to-physical mapping analyses provide novel data regarding the genomic attributes of DArT markers in plant genomes in general and for Eucalyptus in particular. DArT markers preferentially target the gene space and display a largely homogeneous distribution across the genome, thereby providing superb coverage for mapping and genome-wide applications in breeding and diversity studies. Data reported on these ubiquitous properties of DArT markers will be particularly valuable to researchers working on less-studied crop species who already count on DArT genotyping arrays but for which no reference genome is yet available to allow such detailed characterization.

Comprehensive genetic dissection of wood properties in a widely-grown tropical tree: Eucalyptus

Background

Eucalyptus is an important genus in industrial plantations throughout the world and is grown for use as timber, pulp, paper and charcoal. Several breeding programmes have been launched worldwide to concomitantly improve growth performance and wood properties (WPs). In this study, an interspecific cross between Eucalyptus urophylla and E. grandis was used to identify major genomic regions (Quantitative Trait Loci, QTL) controlling the variability of WPs.

Results

Linkage maps were generated for both parent species. A total of 117 QTLs were detected for a series of wood and end-use related traits, including chemical, technological, physical, mechanical and anatomical properties. The QTLs were mainly clustered into five linkage groups. In terms of distribution of QTL effects, our result agrees with the typical L-shape reported in most QTL studies, i.e. most WP QTLs had limited effects and only a few (13) had major effects (phenotypic variance explained > 15%). The co-locations of QTLs for different WPs as well as QTLs and candidate genes are discussed in terms of phenotypic correlations between traits, and of the function of the candidate genes. The major wood property QTL harbours a gene encoding a Cinnamoyl CoA reductase (CCR), a structural enzyme of the monolignol-specific biosynthesis pathway.

Conclusions

Given the number of traits analysed, this study provides a comprehensive understanding of the genetic architecture of wood properties in this Eucalyptus full-sib pedigree. At the dawn of Eucalyptus genome sequence, it will provide a framework to identify the nature of genes underlying these important quantitative traits.

Overexpression of EgROP1, a Eucalyptus vascular-expressed Rac-like small GTPase, affects secondary xylem formation in Arabidopsis thaliana

To better understand the genetic control of secondary xylem formation in trees we analysed genes expressed during Eucalyptus xylem development. Using eucalyptus xylem cDNA libraries, we identified EgROP1, a member of the plant ROP family of Rho-like GTPases. These signalling proteins are central regulators of many important processes in plants, but information on their role in xylogenesis is scarce. Quantitative real-time reverse-transcriptase polymerase chain reaction (qRT-PCR) confirmed that EgROP1 was preferentially expressed in the cambial zone and differentiating xylem in eucalyptus. Genetic mapping performed in a eucalyptus breeding population established a link between EgROP1 sequence polymorphisms and quantitative trait loci (QTLs) related to lignin profiles and fibre morphology. Overexpression of various forms of EgROP1 in Arabidopsis thaliana altered anisotropic cell growth in transgenic leaves, but most importantly affected vessel element and fibre growth in secondary xylem. Patches of fibre-like cells in the secondary xylem of transgenic plants showed changes in secondary cell wall thickness, lignin and xylan composition. These results suggest a role for EgROP1 in fibre cell morphology and secondary cell wall formation making it a good candidate gene for marker-based selection of eucalyptus trees.

Eucalyptus applied genomics: from gene sequences to breeding tools

Eucalyptus is the most widely planted hardwood crop in the tropical and subtropical world because of its superior growth, broad adaptability and multipurpose wood properties. Plantation forestry of Eucalyptus supplies high-quality woody biomass for several industrial applications while reducing the pressure on tropical forests and associated biodiversity. This review links current eucalypt breeding practices with existing and emerging genomic tools. A brief discussion provides a background to modern eucalypt breeding together with some current applications of molecular markers in support of operational breeding. Quantitative trait locus (QTL) mapping and genetical genomics are reviewed and an in-depth perspective is provided on the power of association genetics to dissect quantitative variation in this highly diverse organism. Finally, some challenges and opportunities to integrate genomic information into directional selective breeding are discussed in light of the upcoming draft of the Eucalyptus grandis genome. Given the extraordinary genetic variation that exists in the genus Eucalyptus, the ingenuity of most breeders, and the powerful genomic tools that have become available, the prospects of applied genomics in Eucalyptus forest production are encouraging.

Genetic mapping of hop (Humulus lupulus L.) applied to the detection of QTLs for alpha-acid content

The map locations and effects of quantitative trait loci (QTLs) were estimated for alpha-acid content in hop (Humulus lupulus L.) using amplified fragment length polymorphism (AFLP) and microsatellite marker (simple sequence repeat (SSR)) genetic linkage maps constructed from a double pseudotestcross. The mapping population consisted of 111 progeny from a cross between the German hop cultivar 'Magnum', which exhibits high levels of alpha-acids, and a wild Slovene male hop, 2/1. The progeny segregated quantitatively for alpha-acid content determined in 2002, 2003, and 2004. The maternal map consisted of 96 markers mapped on 14 linkage groups defining 661.90 cM of total map distance. The paternal map included 70 markers assigned to 12 linkage groups covering 445.90 cM of hop genome. QTL analysis indicated 4 putative QTLs (alpha1, alpha2, alpha3, and alpha4) on linkage groups (LGs) 03, 01, 09, and 03 of the female map, respectively. QTLs explained 11.9%-24.8% of the phenotypic variance. The most promising QTL to be used in marker-assisted selection is alpha2, the peak of which colocated exactly with the AFLP marker. Three chalcone synthase-like genes (chs2, chs3, and chs4) involved in hop bitter acid synthesis mapped together on LG04 of the female map. Saturation of the maps, particularly the putative QTL regions, will be carried out using SSR markers, and the stability of the QTLs will be tested in the coming years.

A microsatellite-based consensus linkage map for species of Eucalyptus and a novel set of 230 microsatellite markers for the genus

BACKGROUND

Eucalypts are the most widely planted hardwood trees in the world occupying globally more than 18 million hectares as an important source of carbon neutral renewable energy and raw material for pulp, paper and solid wood. Quantitative Trait Loci (QTLs) in Eucalyptus have been localized on pedigree-specific RAPD or AFLP maps seriously limiting the value of such QTL mapping efforts for molecular breeding. The availability of a genus-wide genetic map with transferable microsatellite markers has become a must for the effective advancement of genomic undertakings. This report describes the development of a novel set of 230 EMBRA microsatellites, the construction of the first comprehensive microsatellite-based consensus linkage map for Eucalyptus and the consolidation of existing linkage information for other microsatellites and candidate genes mapped in other species of the genus.

RESULTS

The consensus map covers approximately 90% of the recombining genome of Eucalyptus, involves 234 mapped EMBRA loci on 11 linkage groups, an observed length of 1,568 cM and a mean distance between markers of 8.4 cM. A compilation of all microsatellite linkage information published in Eucalyptus allowed us to establish the homology among linkage groups between this consensus map and other maps published for E. globulus. Comparative mapping analyses also resulted in the linkage group assignment of other 41 microsatellites derived from other Eucalyptus species as well as candidate genes and QTLs for wood and flowering traits published in the literature. This report significantly increases the availability of microsatellite markers and mapping information for species of Eucalyptus and corroborates the high conservation of microsatellite flanking sequences and locus ordering between species of the genus.

CONCLUSION

This work represents an important step forward for Eucalyptus comparative genomics, opening stimulating perspectives for evolutionary studies and molecular breeding applications. The generalized use of an increasingly larger set of interspecific transferable markers and consensus mapping information, will allow faster and more detailed investigations of QTL synteny among species, validation of expression-QTL across variable genetic backgrounds and positioning of a growing number of candidate genes co-localized with QTLs, to be tested in association mapping experiments.

Genomic research in Eucalyptus

Eucalyptus L'Hérit. is a genus comprised of more than 700 species that is of vital importance ecologically to Australia and to the forestry industry world-wide, being grown in plantations for the production of solid wood products as well as pulp for paper. With the sequencing of the genomes of Arabidopsis thaliana and Oryza sativa and the recent completion of the first tree genome sequence, Populus trichocarpa, attention has turned to the current status of genomic research in Eucalyptus. For several eucalypt species, large segregating families have been established, high-resolution genetic maps constructed and large EST databases generated. Collaborative efforts have been initiated for the integration of diverse genomic projects and will provide the framework for future research including exploiting the sequence of the entire eucalypt genome which is currently being sequenced. This review summarises the current position of genomic research in Eucalyptus and discusses the direction of future research.

EgMYB2, a new transcriptional activator from Eucalyptus xylem, regulates secondary cell wall formation and lignin biosynthesis

Summary EgMYB2, a member of a new subgroup of the R2R3 MYB family of transcription factors, was cloned from a library consisting of RNA from differentiating Eucalyptus xylem. EgMYB2 maps to a unique locus on the Eucalyptus grandis linkage map and co-localizes with a quantitative trait locus (QTL) for lignin content. Recombinant EgMYB2 protein was able to bind specifically the cis-regulatory regions of the promoters of two lignin biosynthetic genes, cinnamoyl-coenzyme A reductase (CCR) and cinnamyl alcohol dehydrogenase (CAD), which contain MYB consensus binding sites. EgMYB2 was also able to regulate their transcription in both transient and stable expression assays. Transgenic tobacco plants over-expressing EgMYB2 displayed phenotypic changes relative to wild-type plants, among which were a dramatic increase in secondary cell wall thickness, and an alteration of the lignin profiles. Transcript abundance of genes encoding enzymes specific to lignin biosynthesis was increased to varying extents according to the position of individual genes in the pathway, whereas core phenylpropanoid genes were not significantly affected. Together these results suggest a role for EgMYB2 in the co-ordinated control of genes belonging to the monolignol-specific pathway, and therefore in the biosynthesis of lignin and the regulation of secondary cell wall formation.

Transcript profiling of Eucalyptus xylem genes during tension wood formation

Tension wood formed in response to gravitational force is a striking example of the plasticity of angiosperm wood. In this study our goal was to characterize the early changes in gene expression during tension wood formation in Eucalyptus. Using cDNA array technology, transcript profiling of 231 genes preferentially expressed in differentiating Eucalyptus xylem was followed from 6 h to 1 wk of a tension time course of artificially bent Eucalyptus trees. 196 genes were differentially regulated between control and bent trees, some exhibiting distinctive expression patterns related to changes in secondary cell wall structure and composition. For instance, expression of a cellulose synthase gene was well correlated with the appearance of the G-layers. Cluster correlation analysis revealed differential regulation of lignin biosynthetic genes and may also be used to help infer the function of unknown gene products. Eucalyptus wood transcriptome analysis during tension wood formation not only provided new clues into the transcriptional regulatory network of genes preferentially expressed in xylem, but also highlighted candidate genes responsible for the genetic and environmentally induced variation of wood quality traits.

Genetics of postzygotic isolation in Eucalyptus: whole-genome analysis of barriers to introgression in a wide interspecific cross of Eucalyptus grandis and E. globulus

The genetic architecture of hybrid fitness characters can provide valuable insights into the nature and evolution of postzygotic reproductive barriers in diverged species. We determined the genome-wide distribution of barriers to introgression in an F(1) hybrid of two Eucalyptus tree species, Eucalyptus grandis (W. Hill ex Maiden.) and E. globulus (Labill.). Two interspecific backcross families (N = 186) were used to construct comparative, single-tree, genetic linkage maps of an F(1) hybrid individual and two backcross parents. A total of 1354 testcross AFLP marker loci were evaluated in the three parental maps and a substantial proportion (27.7% average) exhibited transmission ratio distortion (alpha = 0.05). The distorted markers were located in distinct regions of the parental maps and marker alleles within each region were all biased toward either of the two parental species. We used a Bayesian approach to estimate the position and effect of transmission ratio distorting loci (TRDLs) in the distorted regions of each parental linkage map. The relative viability of TRDL alleles ranged from 0.20 to 0.72. Contrary to expectation, heterospecific (donor) alleles of TRDLs were favored as often as recurrent alleles in both backcrosses, suggesting that positive and negative heterospecific interactions affect introgression rates in this wide interspecific pedigree.

A molecular linkage map of olive (Olea europaea L) based on RAPD, microsatellite, and SCAR markers

An integrated molecular linkage map of olive (Olea europaea L.) was constructed based on randomly amplified polymorphic DNA (RAPD), sequence characterized amplified region (SCAR), and microsatellite markers using the pseudo-testcross strategy. A mapping population of 104 individuals was generated from an F1 full-sib family of a cross between 'Frantoio' and 'Kalamata'. The hybridity of the mapping population was confirmed by genetic similarity and nonmetric multidimensional scaling. Twenty-three linkage groups were mapped for 'Kalamata', covering 759 cM of the genome with 89 loci and an average distance between loci of 11.5 cM. Twenty-seven linkage groups were mapped for 'Frantoio', covering 798 cM of the genome with 92 loci and an average distance between loci of 12.3 cM. For the integrated map, 15 linkage groups covered 879 cM of the genome with 101 loci and an average distance between loci of 10.2 cM. The size of the genomic DNA was estimated to be around 3000 cM. A sequence characterized amplified region marker linked to olive peacock disease resistance was mapped to linkage group 2 of the integrated map. These maps will be the starting point for studies on the structure, evolution, and function of the olive genome. When the mapping progeny pass through their juvenile phase and assume their adult characters, mapping morphological markers and identification of quantitative trait loci for adaptive traits will be the primary targets.

Identification of QTLs influencing combustion quality in Miscanthus sinensis Anderss. II. Chlorine and potassium content

Chlorine and potassium content are important traits related to combustion quality of Miscanthus species. These traits were analysed in a cross between F(1.1) and F(1.7) entries of Miscanthus sinensis Anderss, both lines offspring of the cross between MS-90-2 and MS-88-110. Quantitative trait locus (QTL) analyses were performed on a previous linkage map constructed with the offspring cross mapping strategy. The mapqtl 4.0 package was used to perform QTL analyses. Six potential QTLs were detected with data collected over a 2-year period. Of these, four were associated with chlorine and two with potassium. These results could be used as an initial step to develop a marker-aided selection programme for biomass with low mineral content.

Nearly complete genetic maps of Pinus sylvestris L. (Scots pine) constructed by AFLP marker analysis in a full-sib family

We have constructed nearly complete linkage maps of Pinus sylvestris (L.) using AFLP markers based on a two-way pseudo-testcross strategy in a full-sib family founded in an advanced breeding program. With 39 primer combinations, a total of 737 markers (320 from the mother and 417 from the father) segregated in a 1:1 ratio, corresponding to DNA polymorphism: heterozygous in one parent and null in the other. In the maternal parent, 188 framework markers were mapped in 12 linkage groups, equivalent to the Pinus haploid chromosome number, with a total coverage of 1,695.5 cM. In the paternal parent, 245 framework markers established a map with 15 linkage groups, spanning a genome length of 1,718.5 cM. The estimated total map length was L(F) = 1,681 cM for the female and L(M) = 1,645 cM for the male using a modified method-of-moment estimator. Combining these values with those estimated from the observed map lengths in both parents, we estimated the genome length in Scots pine to be between 1,600 and 2,100 cM. Our genome coverage was estimated to be more than 98% with a framework marker interval of 20 cM for both parents. Most of the female and male linkage groups were associated through the analysis of the intercross markers.

RAPD-based genetic linkage maps of yellow passion fruit (Passiflora edulis Sims. f. flavicarpa Deg.)

A single cross between two clones of passion fruit (Passiflora edulis Sims. f. flavicarpa Deg., 2n = 18) was selected for genetic mapping. The mapping population was composed of 90 F1 plants derived from a cross between 'IAPAR 123' (female parent) and 'IAPAR 06' (male parent). A total of 380 RAPD primers were analyzed according to two-way pseudo-testcross mapping design. The linkage analysis was performed using Mapmaker version 3.0 with LOD 4.0 and a maximum recombination fraction (theta) of 0.30. Map distances were estimated using the Kosambi mapping function. Linkage maps were constructed with 269 loci (2.38 markers/primer), of which 255 segregated 1:1, corresponding to a heterozygous state in one parent and null in the other. The linkage map for 'IAPAR123' consisted of 135 markers. A total of nine linkage groups were assembled covering 727.7 cM, with an average distance of 11.20 cM between framework loci. The sizes of the linkage groups ranged from 56 to 144.6 cM. The linkage map for 'IAPAR 06' consisted of 96 markers, covering 783.5 cM. The average distance between framework loci was 12.2 cM. The length of the nine linkage groups ranged from 20.6 to 144.2 cM. On average, both maps provided 61% genome coverage. Twenty-four loci (8.9%) remained unlinked. Among their many applications, these maps are a starting point for the identification of quantitative trait loci for resistance to the main bacterial disease affecting passion fruit orchards in Brazil, caused by Xanthomonas campestris pv. passiflorae, because parental genotypes exhibit diverse responses to bacterial inoculation.

Molecular linkage maps of the Populus genome

We report molecular genetic linkage maps for an interspecific hybrid population of Populus, a model system in forest-tree biology. The hybrids were produced by crosses between P. deltoides (mother) and P. euramericana (father), which is a natural hybrid of P. deltoides (grandmother) and P. nigra (grandfather). Linkage analysis from 93 of the 450 backcross progeny grown in the field for 15 years was performed using random amplified polymorphic DNAs (RAPDs), amplified fragment length polymorphisms (AFLPs), and inter-simple sequence repeats (ISSRs). Of a total of 839 polymorphic markers identified, 560 (67%) were testcross markers heterozygous in one parent but null in the other (segregating 1:1), 206 (25%) were intercross dominant markers heterozygous in both parents (segregating 3:1), and the remaining 73 (9%) were 19 non-parental RAPD markers (segregating 1:1) and 54 codominant AFLP markers (segregating 1:1:1:1). A mixed set of the testcross markers, non-parental RAPD markers, and codominant AFLP markers was used to construct two linkage maps, one based on the P. deltoides (D) genome and the other based on P. euramericana (E). The two maps showed nearly complete coverage of the genome, spanning 3801 and 3452 cM, respectively. The availability of non-parental RAPD and codominant AFLP markers as orthologous genes allowed for a direct comparison of the rate of meiotic recombination between the two different parental species. Generally, the rate of meiotic recombination was greater for males than females in our interspecific poplar hybrids. The confounded effect of sexes and species causes the mean recombination distance of orthologous markers to be 11% longer for the father (P. euramericana; interspecific hybrid) than for the mother (P. deltoides; pure species). The linkage maps constructed and the interspecific poplar hybrid population in which clonal replicates for individual genotypes are available present a comprehensive foundation for future genomic studies and quantitative trait locus (QTL) identification.

Preliminary interspecific genetic maps of the Populus genome constructed from RAPD markers

We have constructed RAPD-based linkage maps for an interspecific cross between two species of the genus Populus (P. adenopoda and P. alba), based on a double pseudo-test-cross strategy. Of a total of 360 polymorphic fragments scored, 290 showed a test-cross configuration, corresponding to DNA polymorphisms heterozygous in one parent and null in the other. In the female parent, P. adenopoda, 82 markers were grouped in 19 different linkage groups (553 cM), whereas in the male parent P. alba, 197 markers established a much more complete framework map with an observed genome length of 2300 cM covering 87% of the total P. alba genome. The larger number of test-cross markers detected for the P. alba parent than for the P. adenopoda parent might be due to a higher level of heterozygosity in the former than in the latter. In this study, we detected only a small percentage (2%) of the intercross dominant markers heterozygous in both parents and segregating 3:1 in the progeny. The further focus in this mapping study should be on the identification of more intercross markers, to align the two parent-specific maps into a consensus map for mapping important genes causing species differentiation during long evolutionary divergences.Key words: interspecific hybrids, linkage map, poplar, pseudo-testcross mapping strategy.

Dense genetic linkage maps of three Populus species (Populus deltoides, P. nigra and P. trichocarpa) based on AFLP and microsatellite markers

Populus deltoides, P. nigra, and P. trichocarpa are the most important species for poplar breeding programs worldwide. In addition, Populus has become a model for fundamental research on trees. Linkage maps were constructed for these three species by analyzing progeny of two controlled crosses sharing the same female parent, Populus deltoides cv. S9-2 x P. nigra cv. Ghoy and P. deltoides cv. S9-2 x P. trichocarpa cv. V24. The two-way pseudotestcross mapping strategy was used to construct the maps. Amplified fragment length polymorphism (AFLP) markers that segregated 1:1 were used to form the four parental maps. Microsatellites and sequence-tagged sites were used to align homoeologous groups between the maps and to merge linkage groups within the individual maps. Linkage analysis and alignment of the homoeologous groups resulted in 566 markers distributed over 19 groups for P. deltoides covering 86% of the genome, 339 markers distributed over 19 groups for P. trichocarpa covering 73%, and 369 markers distributed over 28 groups for P. nigra covering 61%. Several tests for randomness showed that the AFLP markers were randomly distributed over the genome.

Construction of a framework map inPinus contortasubsp.latifoliausing random amplified polymorphic DNA markers

We report on the construction of the first random amplified polymorphic DNA (RAPD) framework map in Pinus contorta subsp. latifolia. Genomic DNA of haploid megagametophytes from 90 open-pollinated seeds originating from a single tree were amplified with 840 random decamer oligonucleotide primers by the polymerase chain reaction. Three-hundred twenty-eight RAPD markers with fragment sizes that ranged between 260 and 3080 base pairs were found segregating at 110 random decamer oligonucleotide primers. Of these 328 RAPD markers, 148 were mapped to 16 framework linkage groups and 77 were mapped as accessory markers onto the framework linkage groups, on a support interval of minimal LOD score of 3. The 16 framework maps cover a distance of 2287 cM. The estimate of genome size was 2407 cM with a 95% confidence interval of 2304–2459 cM.Key words: framework genomic map, RAPD, Pinus contorta subsp. latifolia.

Compression wood-responsive proteins in developing xylem of maritime pine (Pinus pinaster ait.)

When a conifer shoot is displaced from its vertical position, compression wood (CW) is formed on the under side and can eventually return the shoot to its original position. Changes in cell wall structure and chemistry associated with CW are likely to result from differential gene/protein expression. Two-dimensional polyacrylamide gel electrophoresis of differentiating xylem proteins was combined with the physical characterization of wooden samples to identify and characterize CW-responsive proteins. Differentiating xylem was harvested from a 22-year-old crooked maritime pine (Pinus pinaster Ait.) tree. Protein extracted from different samples were revealed by high-resolution silver stained two-dimensional polyacrylamide gel electrophoresis and analyzed with a computer-assisted system for single spot quantification. Growth strain (GS) measurements allowed xylem samples to be classified quantitatively from normal wood to CW. Regression of lignin and cellulose content on GS showed that an increase in the percentage of lignin and a decrease of the percentage of cellulose corresponded to increasing GS values, i.e. CW. Of the 137 studied spots, 19% were significantly associated with GS effect. Up-regulated proteins included 1-aminocyclopropane-1-carboxylate oxidase (an ethylene forming enzyme), a putative transcription factor, two lignification genes (caffeic O-methyltransferase and caffeoyl CoA-O-methyltransferase), members of the S-adenosyl-L-methionine-synthase gene family, and enzymes involved in nitrogen and carbon assimilation (glutamine synthetase and fructokinase). A clustered correlation analysis was performed to study simultaneously protein expression along a gradient of gravistimulated stressed xylem tissue. Proteins were found to form "expression clusters" that could identify: (a) Gene product under similar control mechanisms, (b) partner proteins, or (c) functional groups corresponding to specialized pathways. The possibility of obtaining regulatory correlations and anticorrelations between proteins provide us with a new category of homology (regulatory homology) in tracing functional relationships.

Properties of AFLP markers in inheritance and genetic diversity studies of pinus sylvestris L

We analysed the properties of AFLP markers in Pinus sylvestris. Using primers with three selective nucleotides, the AFLP protocol produced large numbers of amplified bands and could only be used with a restricted number of primer combinations. Replacement of the EcoRI +3 primer by an EcoRI +4 primer halved the number of bands, facilitating analysis. The inheritance of all but about 8.4% of the amplified bands has been confirmed to be Mendelian. We compared band patterns among selected P. sylvestris trees from northern Sweden, two Asian species of Pinus and one species from the genus Picea. The dendrogram obtained was generally concordant with the taxonomic data, although the genetic similarity values between trees from different genera did not entirely follow accepted inter- and intraspecific relationships. This deviation was less pronounced using primer combinations that generated fewer bands. More than 69.1% of the bands that were polymorphic in two P. sylvestris trees or 29 of their F1 progeny were in a pseudo-testcross configuration and thus were useful for the development of a linkage map for each parent. These markers have been analysed in four other crosses, and 83% of the bands could be mapped in at least one cross. Depending on the level of heterozygosity of the parents, the efficiency of such mapping will vary, but the AFLP technique appears to be a powerful way to generate, very quickly, large numbers of markers that are useful for constructing and comparing linkage maps.