Effects of Endic Anhydride Grafted PPC on the Properties of PHBV Blends

Poly(β-hydroxybutyrate-co-β-hydroxyvalerate) (PHBV) was modified with endic anhydride grafted poly(propylene carbonate) (EA-PPC), and then PHBV/EA-PPC composite polymers were prepared by melt blending under the catalysis of stannous octoate (Sn(Oct)₂). The blends were characterized by an electronic universal testing machine, cantilever impact testing machine, and differential scanning calorimeter (DSC), as well as dynamic mechanical analysis (DMA) and field emission scanning electron microscopy (FESEM). Effects of the amount of Sn(Oct)₂ on the mechanical properties, thermal properties, and morphology of the blends were discussed. The results showed that the addition of Sn(Oct)₂ promoted the transesterification reaction between PHBV and EA-PPC, and the compatibility between PHBV and PPC was greatly improved. When the amount of Sn(Oct)₂ was 3 wt%, the impact strength and elongation at break of the PHBV/EA-PPC blend increased from 3.7 kJ/m² and 4.1% to 5.9 kJ/m² and 387.5%, respectively, and there was no significant decrease in tensile strength. Additionally, four esterification reaction mechanisms for PHBV/EA-PPC blends were proposed.

Poly(lactic acid) (PLA) and polyhydroxyalkanoates (PHAs), green alternatives to petroleum-based plastics: a review

In spite of the fact that petroleum-based plastics are convenient in terms of fulfilling the performance requirements of many applications, they contribute significantly to a number of ecological and environmental problems. Recently, the public awareness of the negative effects of petroleum-based plastics on the environment has increased. The present utilization of natural resources cannot be sustained forever. Furthermore, oil is often subjected to price fluctuations and will eventually be depleted. The increase in the level of carbon dioxide due to the combustion of fossil fuel is causing global warming. Concerns about preservation of natural resources and climate change are considered worldwide motivations for academic and industrial researchers to reduce the consumption and dependence on fossil fuel. Therefore, bio-based polymers are moving towards becoming the favorable option to be utilized in polymer manufacturing, food packaging, and medical applications. This paper represents an overview of the feasibility of both Poly Lactic Acid (PLA) and polyhydroxyalkanoates (PHAs) as alternative materials that can replace petroleum-based polymers in a wide range of industrial applications. Physical, thermal, rheological, and mechanical properties of both polymers as well as their permeability and migration properties have been reviewed. Moreover, PLA's recyclability, sustainability, and environmental assessment have been also discussed. Finally, applications in which both polymers can replace petroleum-based plastics have been explored and provided.

Engineering Pseudomonas entomophila for synthesis of copolymers with defined fractions of 3-hydroxybutyrate and medium-chain-length 3-hydroxyalkanoates

Polyhydroxyalkanoates (PHA) composed of both short-chain-length (SCL) and medium-chain-length (MCL) monomers (SCL-co-MCL PHA) combine the advantages of high strength and elasticity provided by SCL PHA and MCL PHA, respectively. Synthesis of SCL-co-MCL PHA, namely, copolymers of 3-hydroxybutyrate (3HB) and MCL 3-hydroxyalkanoates (3HA) such as 3-hydroxydecanoate (3HD) and longer chain 3HA, has been a challenge for a long time. This study aims to engineer Pseudomonas entomophila for synthesizing P(3HB-co-MCL 3HA) via weakening its β-oxidation pathway combined with insertion of 3HB synthesis pathway consisting of β-ketothiolase (phaA) and acetoacetyl-CoA reductase (phaB). 3HB and MCL 3HA polymerization is catalyzed by a low specificity PHA synthase (phaC), namely, mutated PhaC61-3. The link between the fatty acid de novo synthesis and PHA synthesis was further blocked to increase the supply for SCL and MCL monomers in P. entomophila. The so-constructed P. entomophila was successfully used to synthesize novel PHA copolymers of P(3HB-co-3HD), P(3HB-co-3HDD) and P(3HB-co-3H9D) consisting of 3HB and 3-hydroxydecanoate (3HD), 3-hydroxydodecanoate (3HDD) and 3-hydroxy-9-decanent (3H9D), respectively. MCL 3HA compositions of P(3HB-co-3HD) and P(3HB-co-3HDD) can be adjusted from 0 to approximate 100 mol%. Results demonstrated that the engineered P. entomophila could be a platform for tailor-made P(3HB-co-MCL 3HA).

Addressing the Issue of Microplastics in the Wake of the Microbead-Free Waters Act-A New Standard Can Facilitate Improved Policy

The United States Microbead-Free Waters Act was signed into law in December 2015. It is a bipartisan agreement that will eliminate one preventable source of microplastic pollution in the United States. Still, the bill is criticized for being too limited in scope, and also for discouraging the development of biodegradable alternatives that ultimately are needed to solve the bigger issue of plastics in the environment. Due to a lack of an acknowledged, appropriate standard for environmentally safe microplastics, the bill banned all plastic microbeads in selected cosmetic products. Here, we review the history of the legislation and how it relates to the issue of microplastic pollution in general, and we suggest a framework for a standard (which we call "Ecocyclable") that includes relative requirements related to toxicity, bioaccumulation, and degradation/assimilation into the natural carbon cycle. We suggest that such a standard will facilitate future regulation and legislation to reduce pollution while also encouraging innovation of sustainable technologies.

Improved productivity of poly (3-hydroxybutyrate) (PHB) in thermophilic Chelatococcus daeguensis TAD1 using glycerol as the growth substrate in a fed-batch culture

A particularly successful polyhydroxyalkanoate (PHA) in industrial applications is poly (3-hydroxybutyrate) (PHB). However, one of the major obstacles for wider application of PHB is the cost of its production and purification. Therefore, it is desirable to discover a method for producing PHB in large quantities at a competitive price. Glycerol is a cheap and widely used carbon source that can be applied in PHB production process. There are numerous advantages to operating fermentation at elevated temperatures; only several thermophilic bacteria are able to accumulate PHB when glycerol is the growth substrate. Here, we report on the possibility of increasing PHB production at low cost using thermophilic Chelatococcus daeguensis TAD1 when glycerol is the growth substrate in a fed-batch culture. We found that (1) excess glycerol inhibited PHB accumulation and (2) organic nitrogen sources, such as tryptone and yeast extract, promoted the growth of C. daeguensis TAD1. In the batch fermentation experiments, we found that using glycerol at low concentrations as the sole carbon source, along with the addition of mixed nitrate (NH4Cl, tryptone, and yeast extract), stimulated PHB accumulation in C. daeguensis TAD1. The results showed that the PHB productivity decreased in the following order: two-stage fed-batch fermentation > fed-batch fermentation > batch fermentation. In optimized culture conditions, a PHB amount of 17.4 g l(-1) was obtained using a two-stage feeding regimen, leading to a productivity rate of 0.434 g l(-1) h(-1), which is the highest productivity rate reported for PHB to date. This high PHB biosynthetic productivity could decrease the total production cost, allowing for further development of industrial applications of PHB.

Synthesis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) from unrelated carbon sources in engineered Rhodospirillum rubrum

Different genes encoding pyridine nucleotide transhydrogenases (pntAB, udhA) and acetoacetyl-CoA reductases (phaB) were heterologously overexpressed in Rhodospirillum rubrum S1. A recombinant strain, which harbored the gene encoding the membrane-bound transhydrogenase PntAB from Escherichia coli MG1655 and the phaB1 gene coding for an NADPH-dependent acetoacetyl-CoA reductase from Ralstonia eutropha H16, accumulated poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [Poly(3HB-co-3HV)] with a 3HV fraction of up to 13 mol% from fructose. This was a 13-fold increase of the 3HV content when compared to the wild-type strain. Higher contents of 3HV are known to reduce the brittleness of this polymer, which is advantageous for most applications. The engineered R. rubrum strain was also able to synthesize this industrially relevant copolymer from CO2 and CO from artificial synthesis gas (syngas) with a 3HV content of 56 mol%. The increased incorporation of 3HV was attributed to an excess of propionyl-CoA, which was generated from threonine and related amino acids to compensate for the intracellular redox imbalance resulting from the transhydrogenase reaction. Thereby, our study presents a novel, molecular approach to alter the composition of bacterial PHAs independently from external precursor supply. Moreover, this study also provides a promising production strain for syngas-derived second-generation biopolymers.

Characterization and evaluation of curcumin loaded guar gum/polyhydroxyalkanoates blend films for wound healing applications

Schematic representation of the blockage of UV rays and controlled release of curcumin on a wound.

Improved productivity of poly (4-hydroxybutyrate) (P4HB) in recombinant Escherichia coli using glycerol as the growth substrate with fed-batch culture

Background

The most successful polyhydroxyalkanoate (PHA) in medical applications is poly(4-hydroxybutyrate) (P4HB), which is due to its biodegradability, biocompatibility and mechanical properties. One of the major obstacles for wider applications of P4HB is the cost of production and purification. It is highly desired to obtain P4HB in large scale at a competitive cost.

Results

In this work, we studied the possibility to increase P4HB productivity by using high cell density culture. To do so, we investigated for the first time some of the most relevant factors influencing P4HB biosynthesis in recombinant Escherichia coli. We observed that P4HB biosynthesis correlated more with limitations of amino acids and less with nitrogen depletion, contrary to the synthesis of many other types of PHAs. Furthermore, it was found that using glycerol as the primary carbon source, addition of acetic acid at the beginning of a batch culture stimulated P4HB accumulation in E. coli. Fed-batch high cell density cultures were performed to reach high P4HB productivity using glycerol as the sole carbon source for cell growth and 4HB as the precursor for P4HB synthesis. A P4HB yield of 15 g L⁻¹ was obtained using an exponential feeding mode, leading to a productivity of 0.207 g L⁻¹ h⁻¹, which is the highest productivity for P4HB reported so far.

Conclusions

We demonstrated that the NZ-amines (amino acids source) in excess abolished P4HB accumulation, suggesting that limitation in certain amino acid pools promotes P4HB synthesis. Furthermore, the enhanced P4HB yield could be achieved by both the effective growth of E. coli JM109 (pKSSE5.3) on glycerol and the stimulated P4HB synthesis via exogenous addition of acetic acid. We have developed fermentation strategies for P4HB production by using glycerol, leading to a productivity of 0.207 g L⁻¹ h⁻¹ P4HB. This high P4HB productivity will decrease the total production cost, allowing further development of P4HB applications.

Microbial degradation of linseed oil-based elastomer and subsequent accumulation of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolymer

The microbial synthesis of environment-friendly poly(3-hydroxybutyrate--co-3-hydroxyvalerate), PHBV, has been performed by using an alkaliphilic microorganism, Alkaliphilus oremlandii OhILAs strain (GenBank Accession number NR_043674.1), at pH 8 and at a temperature of 30-32 °C through the biodegradation of linseed oil-based elastomer. The yield of the copolymer on dry cell weight basis is 90 %. The elastomers used for the biodegradation have been synthesized by cationic polymerization technique. The yield of the PHBV copolymer also varies with the variation of linseed oil content (30-60 %) in the elastomer. Spectroscopic characterization ((1)H NMR and FTIR) of the accumulated product through biodegradation of linseed oil-based elastomers indicates that the accumulated product is a PHBV copolymer consisting of 13.85 mol% of 3-hydroxyvalerate unit. The differential scanning calorimetry (DSC) results indicate a decrease in the melting (T m) and glass transition temperature (T g) of PHBV copolymer with an increase in the content of linseed oil in the elastomer, which is used for the biodegradation. The gel permeation chromatography (GPC) results indicate that the weight average molecular weight (M w) of PHBV copolymer decreases with an increasing concentration of linseed oil in the elastomer. The surface morphology of the elastomer before and after biodegradation is observed under scanning electron microscope (SEM) and atomic force microscope (AFM); these results indicate about porous morphology of the biodegraded elastomer.

A multi-functional polyhydroxybutyrate nanoparticle for theranostic applications

One-step enzymatic synthesis of theranostic PHB nanoparticles using PHA synthase fused with A33scFv and GFP.

Poly(4-hydroxybutyrate) (P4HB) production in recombinant Escherichia coli: P4HB synthesis is uncoupled with cell growth

BACKGROUND

Poly(4-hydroxybutyrate) (P4HB), belonging to the family of bacterial polyhydroxyalkanoates (PHAs), is a strong, flexible and absorbable material which has a large variety of medical applications like tissue engineering and drug delivery. For efficient production of P4HB recombinant Escherichia coli has been employed. It was previously found that the P4HB synthesis is co-related with the cell growth. In this study, we aimed to investigate the physiology of P4HB synthesis, and to reduce the total production cost by using cheap and widely available xylose as the growth substrate and sodium 4-hydroxybutyrate (Na-4HB) as the precursor for P4HB synthesis.

RESULTS

Six different E. coli strains which are able to utilize xylose as carbon source were compared for their ability to accumulate P4HB. E. coli JM109 was found to be the best strain regarding the specific growth rate and the P4HB content. The effect of growth conditions such as temperature and physiological stage of Na-4HB addition on P4HB synthesis was also studied in E. coli JM109 recombinant in batch culture. Under the tested conditions, a cellular P4HB content in the range of 58 to 70% (w w(-1)) and P4HB concentrations in the range of 2.76 to 4.33 g L(-1) were obtained with a conversion yield (Y(P4HB/Na-4HB)) of 92% w w(-1) in single stage batch cultures. Interestingly, three phases were identified during P4HB production: the "growth phase", in which the cells grew exponentially, the "accumulation phase", in which the exponential cell growth stopped while P4HB was accumulated exponentially, and the "stagnation phase", in which the P4HB accumulation stopped and the total biomass remained constant.

CONCLUSIONS

P4HB synthesis was found to be separated from the cell growth, i.e. P4HB synthesis mainly took place after the end of the exponential cell growth. High conversion rate and P4HB contents from xylose and precursor were achieved here by simple batch culture, which was only possible previously through fed-batch high cell density cultures with glucose.

Structural investigation and thermal stability of new extruded wheat flour based polymeric materials

In this study, we compare physical properties of wheat starch and wheat-flour based materials. The comparison has been done using thermogravimetric, calorimetric, X-ray diffraction, mechanic and morphologic experiments conducted on a series of wheat-flour extruded materials. The wheat flour used here can be understood as a by-product of the farm-produce wheat flour. All data obtained by means of these experimental methods allow us to conclude that, basically no significant difference exists between our wheat-flour based and wheat-starch based materials. Only one clear difference occurs for the strain to break value which decreases by about 30% for wheat-flour based materials.

Optimization of cultural and nutritional conditions for accumulation of poly-beta-hydroxybutyrate in Synechocystis sp. PCC 6803

Poly-beta-hydroxybutyrate (PHB) accumulation in the unicellular cyanobacterium, Synechocystis sp. PCC 6803, was studied under various cultural and nutritional conditions. Under controlled condition, cells harvested at the stationary phase of growth depicted maximum accumulation of PHB, i.e., 4.5% (w/w of dry cells) as compared to lag (1.8%) or logarithmic (2.9%) phases of cultures. A temperature range of 28-32 degrees C and pH between 7.5 and 8.5 were preferred for PHB accumulation. Cells cultivated under regular light-dark cycles accumulated more PHB (4.5%) than those grown under continuous illumination (2.4%). Nitrogen and phosphorus starvation stimulated PHB accumulation up to the tune of 9.5 and 11% (w/w of dry cells), respectively. Synechocystis cells pre-grown in glucose (0.1%)-supplemented BG-11 medium when subjected to P-deficiency in presence of acetate (0.4%), PHB accumulation was boosted up to 29% (w/w of dry cells), the value almost 6-fold higher with respect to photoautotrophic condition. Fishpond discharges were found as suitable media for PHB accumulation in the test cyanobacterium.

Graft copolymers of methyl methacrylate and poly([R]-3-hydroxybutyrate) macromonomers as candidates for inclusion in acrylic bone cement formulations: Compression testing

Graft copolymers of methyl methacrylate and biodegradable, biocompatible bacterial poly([R]-3-hydroxybutyrate) (PHB) blocks were synthesized and evaluated as possible constituents in acrylic bone cements for use in orthopaedic applications. The copolymers were produced by conventional free radical copolymerization and incorporated in one commercially available acrylic bone cement brand, Antibiotic Simplex (AKZ). Cements with formulations containing 6.7 and 13.5 wt % of PMMA-graft-PHB were prepared. The morphology of the graft copolymer particles was suggested to influence the ability of the modified cement to be processed. Formulations containing more than about 20 wt % of the graft copolymer resulted in cement doughs that, both after first preparation and several hours later, were either sandy or soft spongy in texture and, thus, would be unacceptable for use in orthopaedic applications. The morphologies of the powders and the volumetric porosity (p) and ultimate compressive strength (UCS) of the cured cements were determined. Micro computed tomography showed that the cements presented average porosities of 13.5-16.9%. It was found that, while the powder particle shape and size for the experimental cements were markedly different from those of AKZ, there was no significant difference in either p or UCS for these cements. The latter was determined to be about 85 MPa for the modified cements and 84 MPa for Antibiotic Simplex. Furthermore, the UCS of all the cements exceeded the minimum level for acrylic bone cements, as stipulated by ASTM F-451.

Degradation of medium-chain-length polyhydroxyalkanoates in tropical forest and mangrove soils

Bacterial polyhydroxyalkanoates (PHAs) are perceived to be a suitable alternative to petrochemical plastics because they have similar material properties, are environmentally degradable, and are produced from renewable resources. In this study, the in situ degradation of medium-chain-length PHA (PHAMCL) films in tropical forest and mangrove soils was assessed. The PHAMCL was produced by Pseudomonas putida PGA1 using saponified palm kernel oil (SPKO) as the carbon source. After 112 d of burial, there was 16.7% reduction in gross weight of the films buried in acidic forest soil (FS), 3.0% in the ones buried in alkaline forest soil by the side of a stream (FSst) and 4.5% in those buried in mangrove soil (MS). There was a slight decrease in molecular weight for the films buried in FS but not for the films buried in FSst and in MS. However, no changes were observed for the melting temperature, glass transition temperature, monomer compositions, structure, and functional group analyses of the films from any of the burial sites during the test period. This means that the integral properties of the films were maintained during that period and degradation was by surface erosion. Scanning electron microscopy of the films from the three sites revealed holes on the film surfaces which could be attributed to attack by microorganisms and bigger organisms such as detritivores. For comparison purposes, films of polyhydroxybutyrate (PHB), a short-chain-length PHA, and polyethylene (PE) were buried together with the PHAMCL films in all three sites. The PHB films disintegrated completely in MS and lost 73.5% of their initial weight in FSst, but only 4.6% in FS suggesting that water movement played a major role in breaking up the brittle PHB films. The PE films did not register any weight loss in any of the test sites.

A mathematical model for regulating monomer composition of the microbially synthesized polyhydroxyalkanoate copolymers

A mathematical model is proposed for predicting the copolymer composition of the microbially synthesized polyhydroxyalkanoate (PHA) copolymers. Based on the biochemical reactions involved in the precursor formation and polymerization pathways, the model correlates the copolymer composition with the cultivation conditions, the enzyme levels and selectivity, and the metabolic pathways. It suggests the following points: (1) in the case of a sole carbon source, the copolymer composition depends mainly on the topology of the metabolic pathways and the selectivity of both the enzymes involved in the precursor formation and the polymerization route; (2) the copolymer composition can be varied in a wide range via alteration of the flux ratio of different types of monomers channeled from two or more independent and simultaneous pathways; (3) the enzymes which should be over-expressed or inhibited to obtain the desired copolymer composition can be predicted. For example, inhibition of the beta-oxidation pathway will increase the content of the monomer units with longer chain length. To test the model, various experiments were envisaged by varying cultivation time, concentration and chain length of the sole carbon source, and molar ratio of the cosubstrates. The predictions from the model agree well with the experimental results. Therefore, the proposed model will be useful in predicting the PHA copolymer composition under different biochemical reaction conditions. In other words, it can provide a guide for the synthesis of desired PHA copolymers.

Biodegradation of microbial and synthetic polyesters by fungi

A variety of biodegradable polyesters have been developed in order to obtain useful biomaterials and to reduce the impact of environmental pollution caused by the large-scale accumulation of non-degradable waste plastics. Polyhydroxyalkanoates, poly(epsilon-caprolactone), poly( l-lactide), and both aliphatic and aromatic polyalkylene dicarboxylic acids are examples of biodegradable polyesters. In general, most aliphatic polyesters are readily mineralized by a number of aerobic and anaerobic microorganisms that are widely distributed in nature. However, aromatic polyesters are more resistant to microbial attack than aliphatic polyesters. The fungal biomass in soils generally exceeds the bacterial biomass and thus it is likely that fungi may play a considerable role in degrading polyesters, just as they predominantly perform the decomposition of organic matter in the soil ecosystem. However, in contrast to bacterial polyester degradation, which has been extensively investigated, the microbiological and environmental aspects of fungal degradation of polyesters are unclear. This review reports recent advances in our knowledge of the fungal degradation of microbial and synthetic polyesters and discusses the ecological importance and contribution of fungi in the biological recycling of waste polymeric materials in the biosphere.

Occurrence, synthesis and medical application of bacterial polyhydroxyalkanoate

Polyhydroxyalkanoates (PHAs) comprise a large class of polyesters that are synthesized by many bacteria as an intracellular carbon and energy compound. Analysis of isolated PHAs reveal interesting properties such as biodegradability and biocompatibility. Research was focused only recently on the application of PHA in implants, scaffolds in tissue engineering, or as drug carriers. Such applications require that PHA be produced at a constant and reproducible quality. To date this can be achieved best through bacterial production in continuous culture where growth conditions are kept constant (chemostat). Recently, it was found that PHA producing bacteria are able to grow simultaneously limited by carbon and nitrogen substrates. Thus, it became possible to produce PHA at high yields on toxic substrate and also control its composition accurately (tailor-made synthesis). Finally, applications of PHA in medicine are discussed.

Microbial degradation of polyesters

Polyesters, such as microbially produced poly[(R)-3-hydroxybutyric acid] [poly(3HB)], other poly[(R)-hydroxyalkanoic acids] [poly(HA)] and related biosynthetic or chemosynthetic polyesters are a class of polymers that have potential applications as thermoplastic elastomers. In contrast to poly(ethylene) and similar polymers with saturated, non-functionalized carbon backbones, poly(HA) can be biodegraded to water, methane, and/or carbon dioxide. This review provides an overview of the microbiology, biochemistry and molecular biology of poly(HA) biodegradation. In particular, the properties of extracellular and intracellular poly(HA) hydrolyzing enzymes [poly(HA) depolymerases] are described.

Mechanism and rate of degradation of polyhydroxyoctanoate films in aqueous media: A long-term in vitro study

The present study investigated the in vitro mechanism and degradation rate of polyhydroxyoctanoate (PHO). Solution-cast PHO films were incubated in either water or isoosmotic phosphate-buffered saline (PBS) for periods ranging from 1 to 24 months. Physical characterization included weight loss, water absorption, pH change, tensile strength, and scanning electron microscopy (SEM) studies. Analytical investigations including electron spectroscopy for chemical analysis, Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), wide-angle X-ray diffraction, and size exclusion chromatography were also performed to assess chemical and morphological changes to the structure of the PHO. The results show that the PHO-cast films incubated in either water or isoosmotic PBS underwent a simple hydrolytic degradation process characterized by water absorption, gradual molecular weight decrease, and negligible mass loss after 24 months of incubation. DSC results suggest that degradation occurred in the amorphous zone, followed by an attack in the crystalline domain. An increase in the vibration stretching of OH after 24 months of incubation, as revealed by FTIR, may indicate that the degradation process began internally, moving outwardly toward the surface of the PHO films. This process was more rapid in the films incubated in PBS than in those incubated in water. However, no significant changes in the morphology of the films were detected by SEM. This study demonstrated that the in vitro degradation of PHO in water or in PBS is a very slow hydrolytic process, exceeding 2 years. Our findings also suggest that the internal degradation mechanism is faster in PBS because of the ionic strength of the medium and that this internal process surface moves gradually toward the surface.

Polyhydroxybutyrate: plastic made and degraded by microorganisms

Polyhydroxybutyrate (PHB) offers many advantages over traditional petrochemically derived plastics. In addition to its complete biodegradability, PHB is formed from renewable resources. It possesses better physical properties than polypropylene for food packaging applications and is completely nontoxic. The poor low-impact strength of PHB is solved by incorporation of hydroxyvalerate monomers into the polymer to produce polyhydroxybutyrate-co-valerate (PHBV), which is commercially marketed under the trade name Biopol. Like PHB, PHBV completely degrades into carbon dioxide and water under aerobic conditions. Microbial synthesis of PHB is the best method for industrial production because it ensures the proper stereochemistry for biodegradation. Microorganisms synthesize and store PHB under nutrient-limited conditions and degrade and metabolize it when the limitation is removed. Current production employs Alcaligenes eutrophus because it grows efficiently on glucose as a carbon source, accumulates PHB up to 80% of its dry weight, and is able to synthesize PHBV when propionic acid is added to the feedstock. PHBV is currently 16 times the price of polypropylene. However, the development of transgenic PHA-producing organisms is expected to greatly reduce its cost. Benefits of using transgenic systems include lack of a depolymerase system, ability to use faster-growing organisms, production of highly purified polymers, and ability to utilize inexpensive carbon sources. Because transgenic plants may someday result in the evolution of plastic crops that could lower the price of PHA to a competitive level, future research will surely focus on such recombinant DNA techniques.

Interaction between poly-3-hydroxybutyrate-co-3-hydroxyvalerate and a denitrifying Pseudomonas strain

In a laboratory-scale system, dentrification activity of a heterotrophic microbial starter culture changed when different lots of poly-3-hydroxybutyrate-co-3-hydroxyvalerate (P(HB-co-HV)) were used as the solid carbon source in the heterotrophic denitrification reactor. In this study, possible influences of physical and chemical properties of commercially produced P(HB-co-HV) (Biopol) on biofilm formation and metabolic activity of a denitrifying starter culture were investigated. These parameters indicate the polymers' suitability for the application as the matrix substance in the bioreactor. No differences in microstructure were detected between the different lots of polymers. Growth inhibitory effects by chemical additives were found in the case of triacetine, which was included as a plasticizer in seven of eight tested lots. The amount of hydroxyvaleric acid in the polymer was not assumed to affect denitrification activity. Relevant differences could be detected regarding primary adhesion of the starter culture Pseudomonas sp. strain 2nIII. It showed good adsorption properties to hydrophobic substances with a dependence on precultivation conditions. Pseudomonas sp. strain 2nIII degraded poly-3-hydroxybutyrate acid homopolymer and P(HB-co-HV) copolymers but was unable to break up poly-3-hydroxyvaleric acid. A possible reason for these findings is the substrate specifity of the polyhydroxyalkanoate depolymerase.

Cloning of poly(3-hydroxybutyrate) depolymerase from a marine bacterium, Alcaligenes faecalis AE122, and characterization of its gene product

A DNA fragment that carries the gene coding for poly(3-hydroxybutyrate) (PHB) depolymerase was cloned from the chromosomal DNA of Alcaligenes faecalis AE122 isolated from seawater. The open reading frame encoding the precursor of the PHB depolymerase was 1905 base pairs (bp) long, corresponding to a protein of 635 amino acid residues (M(r) = 65,208). The promoter site, which could be recognized by Escherichia coli RNA polymerase, was upstream from the gene, and the sequence adhering to the ribosome-binding sequence was found in front of the gene. The deduced amino acid sequence agreed with the N-terminal amino acid sequence of the purified PHB depolymerase from amino acid 28 onwards. Analysis of the deduced amino acid sequence revealed the domain structure of the protein; a signal peptide of 27 amino acids long was followed by a catalytic domain of about 400 amino acids, a fibronectin type III module sequence, and a putative substrate binding domain. The molecular mass (62,526) of the mature protein deduced from the nucleotide sequence was significantly lower than the value (95 kDa) estimated on sodium dodecyl sulfate-polyacrylamide gel electrophoresis, but coincided well with the value (62,426) estimated from matrix-assisted laser desorption ionization mass spectra. By comparison of the primary structure with those of other PHB depolymerases, the substrate binding domain was found to consist of two domains, PHB-specific and poly(3-hydroxyvalerate)-specific ones, connected by a linker region. The PHB depolymerase gene was expressed in Escherichia coli under the control of the tac promoter. The enzyme expressed in E. coli was purified from culture broth and showed the same catalytic properties as the enzyme from A. faecalis.