AFM studies on Langmuir-Blodgett films of cholesterol

Insights in Cell Biomechanics through Atomic Force Microscopy

We review the advances obtained by using Atomic Force Microscopy (AFM)-based approaches in the field of cell/tissue mechanics and adhesion, comparing the solutions proposed and critically discussing them. AFM offers a wide range of detectable forces with a high force sensitivity, thus allowing a broad class of biological issues to be addressed. Furthermore, it allows for the accurate control of the probe position during the experiments, providing spatially resolved mechanical maps of the biological samples with subcellular resolution. Nowadays, mechanobiology is recognized as a subject of great relevance in biotechnological and biomedical fields. Focusing on the past decade, we discuss the intriguing issues of cellular mechanosensing, i.e., how cells sense and adapt to their mechanical environment. Next, we examine the relationship between cell mechanical properties and pathological states, focusing on cancer and neurodegenerative diseases. We show how AFM has contributed to the characterization of pathological mechanisms and discuss its role in the development of a new class of diagnostic tools that consider cell mechanics as new tumor biomarkers. Finally, we describe the unique ability of AFM to study cell adhesion, working quantitatively and at the single-cell level. Again, we relate cell adhesion experiments to the study of mechanisms directly or secondarily involved in pathologies.

Transition in nanoscale electrical conductivity in the Langmuir-Blodgett film of a novel liquid crystalline oligomer

We have studied the nanoscale electrical conductivity of a monolayer film of a novel star shaped liquid crystalline molecule, hexatriphenylene substituted anthraquinone (AQD6). The molecule has a central core of electron deficient anthraquinone moiety connected to six electron rich triphenylene moieties by flexible alkyl chains. The monolayer formed at air-water interface was transferred onto the solid substrates by Langmuir-Blodgett (LB) technique and its surface topography was imaged using an atomic force microscope (AFM). The limiting area obtained from the surface pressure-area per molecule isotherm and the topography of the AFM images suggest that the anthraquinone moiety of the AQD6 molecule is organized in face-on configuration on the substrate and the triphenylene moieties are in edge-on configuration extended away from the substrate. We have studied the electrical conductivity of the AQD6 monolayer deposited on gold coated silicon substrate using a current sensing AFM. Analysis of current (I) − voltage (V) characteristics of the metal-monolayer film-metal junction showed a transition from direct tunneling to an injection tunneling. Further, we have estimated the barrier height and the effective mass of electron in the metal-monolayer film-metal junction.

Condensation of Model Lipid Films by Cholesterol: Specific Ion Effects

The condensing effect and the ability of cholesterol (CHOL) to induce ordering in lipid films is a question of relevance in biological membranes such as the milk fat globule membrane (MFGM) in which the amount of CHOL influences the phase separation and mechanical resistance to rupture of coexisting phases relevant to emulsified food systems. Here, we study the effect of different salts (NaCl, CaCl2, MgCl2, LaCl3) on monolayers made of a model mixture of lipids (DPPC:DPPS 4:1) and CHOL. To this end, we apply Langmuir Film Balance to report a combined analysis of surface pressure-area (π-A) and surface potential-area (ΔV–A) isotherms along with Micro-Brewster Angle Microscopy (Micro-BAM) images of the monolayers in the presence of the different electrolytes. We show that the condensation of lipid by CHOL depends strongly on the nature of the ions by altering the shape and features of the π-A isotherms. ΔV–A isotherms provide further detail on the ion specific interactions with CHOL. Our results show that the condensation of lipids in the presence of CHOL depends on the combined action of ions and CHOL, which can alter the physical state of the monolayer.

Design of Therapeutic Self-Assembled Monolayers of Thiolated Abiraterone

The aim of our work was to synthetize of a new analogue of abiraterone-thiolated abiraterone (HS-AB) and design a gold surface monolayer, bearing in mind recent advances in tuning monolayer structures and using them as efficient drug delivery systems. Therapeutic self-assembled monolayers (TSAMs) were prepared by chemically attaching HS-AB to gold surfaces. Their properties were studied by voltammetry and atomic force microscopy (AFM). A gold electrode with immobilized thioglycolic acid (HS-GA) was used for comparison. The surface concentration of HS-AB on the gold surface was 0.572 nmol/cm², determined from the area of the voltammetric reduction peaks (desorption process). The area per one molecule estimated from the voltammetry experiments was 0.291 nmol/cm². The capacity of thus prepared electrode was also tested. The calculated capacity for the HS-AB modified electrode is 2.90 μF/cm². The obtained value indicates that the monolayer on the gold electrode is quite well ordered and well-packed. AFM images show the formation of gold nanoparticles as a result of immersing the HS-AB modified gold electrode in an aqueous solution containing 1 mM HAuCl₄·3H₂O. These structures arise as a result of the interaction between the HS-AB compound adsorbed on the electrode and the AuCl₄^- ions. The voltammetric experiments also confirm the formation of gold structures with specific catalytic properties in the process of oxygen reduction.

Properties of Artificial Phospholipid Membranes Containing Lauryl Gallate or Cholesterol

Lauryl gallate (LG) is an antioxidant agent. However, it exhibits poor solubility in water. Its interactions with the membrane result in structure evolution thus affecting the membrane functionality. In this paper the Brewster angle microscope coupled with the Langmuir trough was applied to determine the morphology, phase behaviour, thickness and miscibility of ternary Langmuir monolayers with equal mole fractions of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC); 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and an increasing mole fraction of LG. The results were discussed as regards analogous systems where cholesterol (Chol) was the third component. Moreover, the phosphatidylcholine–lauryl gallate (PC–LG) interactions were monitored by the attenuated total reflectance Fourier transform infrared spectroscopy and time-of-flight secondary ion mass spectrometry. Besides lipid composition, the addition of LG was found to be a significant factor to modulate the model membrane properties. The LG molecules adjust themselves to the PC monolayer structure. The hydrophobic fragment is dipped into the membrane interior while the hydroxyl groups of phenolic gallate moiety associate with the polar groups of PC mainly through hydrogen bonding inducing the compacting effect. LG is found to be deeply submerged within DOPC, closer to the double bonds, and its insertion practically does not affect the DPPC/DOPC membrane fluidity. This is crucial for getting more profound insight into the role of LG in stabilizing the non-raft domains, mostly exposed to oxidation in which LG can co-localize and serve its antioxidant function.

Self-assembly and molecular packing in cholesteryl esters at interfaces

To understand the self-assembly and molecular packing in cholesteryl esters relevant to biological processes, we have studied them at the air-water and air-solid interfaces. Our phase and thickness studies employing imaging ellipsometry and atomic force microscopy along with surface manometry show that the molecular packing of cholesteryl esters at interfaces can be related to Craven's model of packing, given for bulk. At the air-water interface, following Craven's model, cholesteryl nonanoate and cholesteryl laurate exhibit a fluidic bilayer phase. Interestingly, we find the fluidic bilayer phase of cholesteryl laurate to be unstable and it switches to a crystalline bilayer phase. However, according to Craven, only cholesteryl esters with longer chain lengths starting from cholesteryl tridecanoate should show the crystalline bilayer phase. The thickness behavior of different phases was also studied by transferring the films onto a silicon substrate by using the Langmuir-Blodgett technique. Texture studies show that cholesterol, cholesteryl acetate, cholesteryl nonanoate, cholesteryl laurate, and cholesteryl myristate exhibit homogeneous films with large size domains, whereas cholesteryl palmitate and cholesteryl stearate exhibit less homogeneous films with smaller size domains. We suggest that such an assembly of molecules can be related to their molecular structures. Simulation studies may confirm such a relation.

Atomic force microscopy and Langmuir-Blodgett monolayer technique to assess contact lens deposits and human meibum extracts

PURPOSE

The purpose of this exploratory study was to investigate the differences in meibomian gland secretions, contact lens (CL) lipid extracts, and CL surface topography between participants with and without meibomian gland dysfunction (MGD).

METHODS

Meibum study: Meibum was collected from all participants and studied via Langmuir-Blodgett (LB) deposition with subsequent Atomic Force Microscopy (AFM) visualization and surface roughness analysis. CL Study: Participants with and without MGD wore both etafilcon A and balafilcon A CLs in two different phases. CL lipid deposits were extracted and analyzed using pressure-area isotherms with the LB trough and CL surface topographies and roughness values were visualized using AFM.

RESULTS

Meibum study: Non-MGD participant meibum samples showed larger, circular aggregates with lower surface roughness, whereas meibum samples from participants with MGD showed more lipid aggregates, greater size variability and higher surface roughness. CL Study: Worn CLs from participants with MGD had a few large tear film deposits with lower surface roughness, whereas non-MGD participant-worn lenses had many small lens deposits with higher surface roughness. Balafilcon A pore depths were shallower in MGD participant worn lenses when compared to non-MGD participant lenses. Isotherms of CL lipid extracts from MGD and non-MGD participants showed a seamless rise in surface pressure as area decreased; however, extracts from the two different lens materials produced different isotherms.

CONCLUSIONS

MGD and non-MGD participant-worn CL deposition were found to differ in type, amount, and pattern of lens deposits. Lipids from MGD participants deposited irregularly whereas lipids from non-MGD participants showed more uniformity.

Atomic force microscopy studies of a floating-bilayer lipid membrane on a Au(111) surface modified with a hydrophilic monolayer

The surface of a gold electrode was functionalized with a hydrophilic monolayer of 1-thio-β-D-glucose formed by spontaneous self-assembly. The Langmuir-Blodgett/Langmuir-Schaefer (LB/LS) method was then used to assemble a bilayer onto the modified Au(111) surface. The bilayer lipid membrane (BLM) was separated from the Au(111) electrode surface by incorporating the monosialoganglioside GM1 into the inner leaflet of a bilayer composed of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and cholesterol. To make the inner leaflet, monolayers of GM1/DMPC/cholesterol with mole ratios of 1:6:3, 2:5:3, and 3:4:3 were used. The outer leaflet was composed of a 7:3 mole ratio of DMPC/cholesterol. Because of the amphiphilic properties of GM1, the hydrophobic acyl chains were incorporated into the BLM, whereas the large hydrophilic carbohydrate headgroups were physically adsorbed to the Au(111) electrode surface, creating a "floating" BLM (fBLM). This model contained a water-rich reservoir between the BLM and the gold surface. In addition, because of the bilayer being physically adsorbed onto the support, the fluidity of the BLM was maintained. The compression isotherms were measured at the air/water interface to determine the phase behavior and optimal transfer conditions. The images acquired using atomic force microscopy (AFM) and the force-distance measurements showed that the structure of the fBLM evolved with increasing GM1 content from 10 to 30 mol %, undergoing a transition from a corrugated to a homogeneous phase. This change was associated with a significant increase in bilayer thickness (from ∼5.3 to 7.3 nm). The highest-quality fBLM was produced with 30 mol % GM1.

The effect of neutral helper lipids on the structure of cationic lipid monolayers

Successful drug delivery via lipid-based systems has often been aided by the incorporation of 'helper lipids'. While these neutral lipids enhance the effectiveness of cationic lipid-based delivery formulations, many questions remain about the nature of their beneficial effects. The structure of monolayers of the cationic lipid dimethyldioctadecylammonium bromide (DODAB) alone, and mixed with a neutral helper lipid, either diolelyphosphatidylethanolamine or cholesterol at a 1 : 1 molar ratio was investigated at the air-water interface using a combination of surface pressure-area isotherms, Brewster angle microscopy (BAM) and specular neutron reflectivity in combination with contrast variation. BAM studies showed that while pure DODAB and DODAB with cholesterol monolayers showed fairly homogeneous surfaces, except in the regions of phase transition, monolayers of DODAB with diolelyphosphatidylethanolamine were, in contrast, inhomogeneous exhibiting irregular bean-shaped domains throughout. Neutron reflectivity data showed that while the thickness of the DODAB monolayer increased from 17 to 24 Å as it was compressed from a surface pressure of 5-40 mN m(-1), the thickness of the helper lipid-containing monolayers, over the same range of surface pressures, was relatively invariant at between 25 and 27 Å. In addition, the monolayers containing diolelyphosphatidylethanolamine were found to be more heavily hydrated than the monolayers of cationic lipid, alone or in combination with cholesterol, with hydration levels of 18 molecules of water per molecule of lipid being recorded for the diolelyphosphatidylethanolamine-containing monolayers at a surface pressure of 30 mN m(-1) compared with only six and eight molecules of water per molecule of lipid for the pure DODAB monolayer and the cholesterol-containing DODAB monolayer, respectively.

Langmuir and Langmuir-Blodgett films of multifunctional, amphiphilic polyethers with cholesterol moieties

Langmuir films of multifunctional, hydrophilic polyethers containing a hydrophobic cholesterol group (Ch) were studied by surface pressure-mean molecular area (π-mmA) measurements and Brewster angle microscopy (BAM). The polyethers were either homopolymers or diblock copolymers of linear poly(glycerol) (lPG), linear poly(glyceryl glycidyl ether) (lPGG), linear poly(ethylene glycol) (lPEG), or hyperbranched poly(glycerol) (hbPG). Surface pressure measurements revealed that the homopolymers lPG and hbPG did not stay at the water surface after spreading and solvent evaporation, in contrast to lPEG. Because of the incorporation of the Ch group in the polymer structure, stable Langmuir films were formed by Ch-lPG(n), Ch-lPGG(n), and Ch-hbPG(n). The Ch-hbPG(n), Ch-lPEG(n), Ch-lPEG(n)-b-lPG(m), Ch-lPEG(n)-b-lPGG(m), and Ch-lPEG(n)-b-hbPG(m) systems showed an extended plateau region assigned to a phase transition involving the Ch groups. Typical hierarchically ordered morphologies of the LB films on hydrophilic substrates were observed for all Ch-initiated polymers. All LB films showed that Ch of the Ch-initiated homopolymers is able to crystallize. This strong tendency of self-aggregation then triggers further dewetting effects of the respective polyether entities. Fingerlike morphologies are observed for Ch-lPEG(69), since the lPEG(69) entity is able to undergo crystallization after transfer onto the silicon substrate.

Chain end distribution of block copolymer in two-dimensional microphase-separated structure studied by scanning near-field optical microscopy

The chain end distribution of a block copolymer in a two-dimensional microphase-separated structure was studied by scanning near-field optical microscopy (SNOM). In the monolayer of poly(octadecyl methacrylate)-block-poly(isobutyl methacrylate) (PODMA-b-PiBMA), the free end of the PiBMA subchain was directly observed by SNOM, and the spatial distributions of the whole block and the chain end are examined and compared with the convolution of the point spread function of the microscope and distribution function of the model structures. It was found that the chain end distribution of the block copolymer confined in two dimensions has a peak near the domain center, being concentrated in the narrower region, as compared with three-dimensional systems.

Monolayer of amphiphilic functionalized gold nanoparticles at an air-water interface

Langmuir films at the air-water interface exhibit a variety of surface phases which arise primarily due to the molecular interaction governed by intermolecular separation. We have studied the thermodynamical aspects of Langmuir monolayers of amphiphilic functionalized gold nanoparticles (AGNs) at the air-water (A-W) interface. Interestingly, the AGN monolayer exhibits phases like gas, a low-ordered liquid (L1) , a high-ordered liquid (L2) , and a collapsed state. We find that the first-order phase transition between L1 and L2 vanishes above a critical temperature of 28.4 degrees C . Surprisingly, for a range of higher temperatures ( > or = 29.4 degrees C and < or = 36.3 degrees C ), the L1 phase undergoes a transition to a bilayer of the L2 phase before entering into the collapsed state.

The Conventional Langmuir Trough Technique as a Convenient Means to Determine the Solubility of Sparingly Soluble Surface Active Molecules: Case Study Cholesterol

The feasibility of a method based on mass preservation [G. Schwarz, J. Zhang, Chem. Phys. Lipids, 110 (2001) 35-45] to determine the solubility of Cholesterol in water from monomolecular films on air/water interface was investigated. Using a mass balance equation, it was found that Cholesterol undergoes an exponential desorption at very low surface pressures followed by an almost linear desorption into the subphase at higher surface pressures until monolayer collapse. Processing of the surface pressure measurements as a function of trough area in accord with the theory, enabled the accurate determination of the molecular dimensions of Cholesterol as a function of surface pressure. Slight modification of the theory enabled accurate quantification of the surface pressure-independent apparent solubility of Cholesterol and the amount of Cholesterol desorbed into the subphase as a function of surface pressure, in the nanomolar range.

Electron transfer studies on cholesterol LB films assembled on thiophenol and 2-naphthalenethiol self-assembled monolayers

We have formed the cholesterol monolayer and multilayer LB films on the self-assembled monolayers of 2-naphthalenethiol (2-NT) and thiophenol (TP) and studied the electrochemical barrier properties of these composite films using cyclic voltammetry and electrochemical impedance spectroscopy. We have also characterized the cholesterol monolayer film using grazing angle FTIR, scanning tunneling microscopy (STM) and atomic force microscopy (AFM). Cholesterol has a long hydrophobic steroid chain, which makes it a suitable candidate to assemble on the hydrophobic surfaces. We find that the highly hydrophobic surface formed by the self-assembled monolayers (SAM) of 2-NT and TP act as effective platforms for the fabrication of cholesterol monolayer and multilayer films. The STM studies show that the cholesterol monolayer films on 2-NT form striped patterns with a separation of 1.0 nm between them. The area per cholesterol molecule is observed to be 0.64 nm2 with a tilt angle of about 28.96 degrees from the surface normal. The electrochemical studies show a large increase in charge transfer resistance and lowering of interfacial capacitance due to the formation of the LB film of cholesterol. We have compared the behavior of this system with that of cholesterol monolayer and multilayers formed on the self-assembled monolayer of thiophenol.

Direct immobilization of cholesteryl-TEG-modified oligonucleotides onto hydrophobic SU-8 surfaces

We introduce a rapid, simple one-step procedure for the high-yield immobilization of cholesteryl-tetraethyleneglycol-modified oligonucleotides (chol-DNA) at hydrophobic sites made of SU-8 photoresist. Topographic structures of SU-8 were microfabricated on microscope glass coverslips sputtered with a Ti/Au layer. Upon application, chol-DNA adsorbed to the SU-8 structures from solution, leaving the surrounding gold surface free of chol-DNA. chol-DNA immobilization is complete within 15 min and yields a surface coverage in the range of 20-95 pmol/cm(2), which corresponds to a film density of 10(12)-10(13) molecules/cm(2). chol-DNA immobilization is stable and can be sustained despite rinsing, drying, dry storage for several hours, and rehydration of chips. Furthermore, complementary DNA in solution hybridizes efficiently to immobilized chol-DNA.

Dynamic and 2D NMR Studies on Hydrogen-Bonding Aggregates of Cholesterol in Low-Polarity Organic Solvents

Self-diffusion coefficients (D) are measured for normal (nondeuterated) and deuterated cholesterol-d(6) (C26 and C27 methyl groups deuterated) in 1-octanol, chloroform, and cyclohexane at concentrations of 1-700 mM by varying the impurity water concentration (>2 mM) and temperature (30-50 degrees C). The pulsed field gradient spin-echo (PGSE) (1)H and (2)H NMR were used, respectively, at 600 and 92 MHz. At 30 degrees C, the hydrodynamic radius (R) obtained at 20 mM from the D value and solvent viscosity is 5.09, 7.07, and 6.17 A, respectively, in 1-octanol, chloroform, and cyclohexane when the impurity water is negligible. The R value in 1-octanol is the smallest and comparable with the average length of the molecular axes for the cholesterol molecule. In 1-octanol, R is invariant against the concentration variation, whereas in chloroform, R is larger and increases almost linearly with cholesterol concentration. At the highest concentration, 700 mM, the R in chloroform is 13.5 and 16.7 A, respectively, when the impurity water is at negligible and saturated concentrations. The R value larger than that in hydrogen-bonding 1-octanol indicates that cholesterol forms an aggregate through hydrogen bonding. The aggregate structure is confirmed by comparing NOESY spectra in chloroform and 1-octanol. The NOESY analysis reveals the presence of one extra cross peak (C4-C19) in chloroform compared to 1-octanol. Because the carbon atoms related to the cross peak are close to the hydroxyl group (C3-OH), cholesterol molecules are considered to be not piled but are found to be OH-centered in the aggregate. This is supported also by larger rotational hydrodynamic radii measured on cholesterol deuterated at positions C2, C3, C4, and C6. This shows that the aggregate formation is driven by the hydrogen-bonding between cholesterol molecules.

Langmuir–Blodgett films of octadecanethiol – properties and potential applications

Octadecanethiol (ODT) is known to form self-assembled monolayer on noble metal surfaces which has potential technological applications. Langmuir-Blodgett (LB) technique is another useful method of obtaining highly ordered assembly of molecules. It is of interest to find whether ODT molecules can also form a stable Langmuir monolayer which facilitates the preparation of LB films. In literature, it has been reported that ODT molecules form an unstable Langmuir monolayer. We have studied the stability of the monolayer of the ODT molecules at air-water interface using surface manometry and microscopy techniques. We find the monolayer to be stable on ultrapure water of resistivity greater than 18MOmega cm. However, the behavior changes in the presence of even small amount of additives like NaOH or CdCl2 in the subphase. Our AFM studies on the LB films of ODT deposited from ion-free ultrapure water showed streak-like bilayer domains. The LB films of ODT deposited from CdCl2 containing aqueous subphase yield dendritic domains of the complexed unit grown over ODT monolayer. These nanostructures on surfaces may have potential applications in molecular electronics.