High pressure processing plus technologies: Enhancing the inactivation of vegetative microorganisms

High pressure processing (HPP) is a non-thermal technology that can ensure microbial safety without compromising food quality. However, the presence of pressure-resistant sub-populations, the revival of sub-lethally injured (SLI) cells, and the resuscitation of viable but non-culturable (VBNC) cells pose challenges for its further development. The combination of HPP with other methods such as moderate temperatures, low pH, and natural antimicrobials (e.g., bacteriocins, lactate, reuterin, endolysin, lactoferrin, lactoperoxidase system, chitosan, essential oils) or other non-thermal processes (e.g., CO2, UV-TiO2 photocatalysis, ultrasound, pulsed electric fields, ultrafiltration) offers feasible alternatives to enhance microbial inactivation, termed as "HPP plus" technologies. These combinations can effectively eliminate pressure-resistant sub-populations, reduce SLI or VBNC cell populations, and inhibit their revival or resuscitation. This review provides an updated overview of microbial inactivation by "HPP plus" technologies and elucidates possible inactivation mechanisms.

Extraction of flavonoids from black mulberry wine residues and their antioxidant and anticancer activity in vitro

Enhancing the valorization of fruit processing by-products is pivotal for advancing the industry. Black mulberry wine residues, a by-product, contains some bioactive compounds, yet its antioxidant and anticancer potentials remain unverified. In this study, ultrasound-assisted enzymatic extraction was optimized by response surface methodology to obtain the flavonoids extracts from black mulberry wine residues, whose antioxidant capacity and anti-cancer activity in vitro was investigated. The results showed that under the optimal extraction conditions (enzyme ratio at pectinase:cellulose = 2:1, mixed enzyme concentration 0.31 mg/mL, enzymatic hydrolysis temperature 55.35 °C, enzymatic hydrolysis time 79.03 min, and ultrasonic time 22.71 min), the extracts from black mulberry wine residues (BMWR-E) reached 5.672 mg/g. At a concentration of 1.2 mg/mL, BMWR-E exhibited strong DPPH and hydroxyl radical scavenging activities. At a concentration of 2.5 mg/mL, BMWR-E showed a strong superoxide anion radical scavenging capacity, with no significant distinction compared to the positive control group (Vitamin C) (p > 0.05). Cell viability assay results showed that BMWR-E was non-toxic to normal BRL-3A cells when applied at concentrations of 0.1-0.3 mg/mL for an incubation period of 24 h, but BMWR-E exhibited the ability to inhibit the proliferation of HepG2 cells. At concentrations of 0.2 mg/mL and above, BMWR-E could induce late apoptosis of HepG2 cells by increasing the protein expression levels of Bax, caspase-3, and caspase-12, reducing the protein expression levels of Bcl-2, inducing cell cycle arrest at G0/G1 phase, thereby inhibiting the proliferation of HepG2 cells. The bioactive properties make BMWR-E possess potential in developing new antioxidants and anti-cancer agents, which would significantly enhance the economic worth of agricultural by-products in product processing. This research can improve the utilization rate of agricultural product processing by-products and protect the environment.

High-Pressure Processing Effects on Microbiological Stability, Physicochemical Properties, and Volatile Profile of a Fruit Salad

Nowadays, consumers are more aware of the effects of their diet on their health, and thus demand natural or minimally processed food products. Therefore, research has focused on processes that assure safe products without jeopardizing their nutritional properties. In this context, this work aimed to evaluate the effects of high-pressure processing (550 MPa/3 min/15 °C, HPP) on a fruit salad (composed of melon juice and pieces of Golden apple and Rocha pear) throughout 35 days of storage at 4 °C. For the physicochemical properties analysed (browning degree, polyphenol oxidase activity, antioxidant activity (ABTS assay), and volatile profile), a freshly made fruit salad was used, while for the microbiological tests (total aerobic mesophiles, and yeast and moulds) spoiled melon juice was added to the fruit salad to increase the microbial load and mimic a challenge test with a high initial microbial load. It was determined that processed samples were more microbiologically stable than raw samples, as HPP enabled a reduction of almost 4-log units of both total aerobic mesophiles and yeasts and moulds, as well as an almost 1.5-fold increase in titratable acidity of the unprocessed samples compared to HPP samples. Regarding browning degree, a significant increase (p < 0.05) was observed in processed versus unprocessed samples (roughly/maximum 68%), while the addition of ascorbic acid decreased the browning of the samples by 29%. For antioxidant activity, there were no significant differences between raw and processed samples during the 35 days of storage. An increase in the activity of polyphenol oxidase immediately after processing (about 150%) was confirmed, which was generally similar or higher during storage compared with the raw samples. Regarding the volatile profile of the product, it was seen that the compounds associated with melon represented the biggest relative percentage and processed samples revealed a decrease in the relative quantity of these compounds compared to unprocessed. Broadly speaking, HPP was shown to be efficient in maintaining the stability and overall quality of the product while assuring microbial safety (by inactivating purposely inoculated microorganisms), which allows for longer shelf life (7 versus 28 days for unprocessed and processed fruit salad, respectively).

High-Pressure Processing of Different Tissue Homogenates from Pigs Challenged with the African Swine Fever Virus

African swine fever (ASF) is a disease that is a growing threat to the global swine industry. Regulations and restrictions are placed on swine movement to limit the spread of the virus. However, these are costly and time-consuming. Therefore, this study aimed to determine if high-pressure processing (HPP) sanitization techniques would be effective against the ASF virus. Here, it was hypothesized that HPP could inactivate or reduce ASF virus infectivity in tissue homogenates. To test this hypothesis, 30 aliquots of each homogenate (spleen, kidney, loin) were challenge-infected with the Turin/83 strain of ASF, at a 10 7.20 median hemadsorption dose (HAD)50/mL. Subsequently, eight aliquots of each homogenate were treated with 600 millipascal (600 MPa) HPP for 3, 5, and 7 min. Six untreated aliquots were used as the controls. Virological results showed a reduction in the viral titer of more than 7-log. These results support the validity of the study hypothesis since HPP treatment was effective in inactivating ASFV in artificially prepared samples. Overall, this study suggests the need for further investigation of other ASFV-contaminated meat products.

Plant polysaccharides extracted by high pressure: A review on yields, physicochemical, structure properties, and bioactivities

Polysaccharides are biologically essential macromolecules, widely exist in plants, which are used in food, medicine, bioactives' encapsulation, targeted delivery and other fields. Suitable extraction technology can not only improve the yield, but also regulate the physicochemical, improve the functional property, and is the basis for the research and application of polysaccharide. High pressure (HP) extraction (HPE) induces the breakage of raw material cells and tissues through rapid changes in pressure, increases extraction yield, reduces extraction time, and modifies structure of polysaccharides. However, thus far, literature review on the mechanism of extraction, improved yield and modified structure of HPE polysaccharide is lacking. Therefore, the present work reviews the mechanism of HPE polysaccharide, increasing extraction yield, regulating physicochemical and functional properties, modifying structure and improving activity. This review contributes to a full understanding of the HPE or development of polysaccharide production and modification methods and promotes the application of HP technology in polysaccharide production.

Recent advances in edible insect processing technologies

Alternative foods have emerged as one of the hot research topics aiming at alleviating food shortage. Insects are one of the alternative foods due to their rich nutrients. Processing is a critical step to develop insect foods, while there is a lack of comprehensive reviews to summarize the main studies. This review aims to demonstrate different processing methods in terms of their impact on insect nutrition and their potential risks. Heat treatments such as boiling and blanching show a negative effect on insect nutrition, but essential to assure food safety. Insects treated by high-pressure hydrostatic technology (HPP) and cold atmospheric pressure plasma (CAPP) can achieve a similar sterilization effect but retain the nutritional and sensory properties. Drying is a practical processing method for industrial insect production, where oven drying serves as a cost-effective method yielding products comparable in quality to freeze-dried ones. In terms of extraction technology, supercritical carbon dioxide and ultrasound-assisted technology can improve the extraction efficiency of proteins and lipids from insects, enhance the production of composite insect-fortified foods, and thus facilitate the development of the insect food industry. To address the widespread negative perceptions and low acceptance towards insect foods among consumers, the primary development direction of the insect food industry may involve creating composite fortified foods and extracting insect-based food components.

Trends in extracting Agro-byproducts' phenolics using non-thermal technologies and their combinative effect: Mechanisms, potentials, drawbacks, and safety evaluation

The agro-food industries generate significant waste with adverse effects. However, these byproducts are rich in polyphenols with diverse bioactivities. Innovative non-thermal extraction (NTE) technologies (Naviglio extractor®, cold plasma (CP), high hydrostatic pressure (HHP), pulse-electric field (PEF), ultrasound-assisted extraction (UAE), etc.) and their combinative effect (integrated UAE + HPPE, integrated PEF + enzyme-assisted extraction, etc.) could improve polyphenolic extraction. Hence, this article comprehensively reviewed the mechanisms, applications, drawbacks, and safety assessment of emerging NTE technologies and their combinative effects in the last 5 years, emphasizing their efficacy in improving agro-byproduct polyphenols' extraction. According to the review, incorporating cutting-edge NTE might promote the extraction ofmore phenolic extractfrom agro-byproducts due to numerous benefits,such as increased extractability,preserved thermo-sensitive phenolics, and low energy consumption. The next five years should investigate combined novel NTE technologies as they increase extractability. Besides, more research must be done on extracting free and bound phenolics, phenolic acids, flavonoids, and lignans from agro by-products. Finally, the safety of the extraction technology on the polyphenolic extract needs a lot of studies (in vivo and in vitro), and their mechanisms need to be explored.

Effects of Pulsed Electric Field on Meat Tenderization and Microbial Decontamination: A Review

This review sought to categorize studies on meat tenderization and safety through pulsed electric field (PEF) treatment, with a particular focus on reconciling conflicting findings regarding the tenderization effect (i.e., the primary outcome of PEF treatment) and to discuss the underlying mechanisms of these effects. While the tenderization effect may vary depending on the homogeneity of PEF treatment and variations in the conditions of texture measurements, the protein associated with tenderization was degraded by PEF treatment in most studies. PEF technology enables the delivery of a high voltage for a brief duration, typically in the microsecond range, making it a non-thermal technology. One of the distinct advantages of PEF is its ability to preserve the freshness of meat due to its exceptionally short treatment time. While PEF studies have traditionally centered on pasteurizing liquid foods, research on its application to meat is steadily expanding. Therefore, this review aims to elucidate the mechanisms of PEF and provide current insights into the applications of this technology for meat tenderization and microbial inactivation.

Gut Microbiome and Metabolome Modulation by High-Hydrostatic-Pressure-Processed Tomato Juice

High hydrostatic pressure (HHP) is a non-thermal pasteurization technology for the enhancement of food products' safety and quality. The components of tomato juice can be affected by HHP processing. Little is known about the effects of HHP-processed tomato juice on the gut microbiome and metabolism. Here, we performed high-throughput sequencing and metabolomics profiling to determine the critical differences in gut microbiota structure and metabolic profiles in mice administered with HHP-processed tomato juice. Tomato juice administration significantly increased the gut bacterial alpha diversity and the relative abundance of Bacteroides. The mice administered with HHP-processed tomato juice were characterized by the enrichment of Bacteroidetes, Alistieps, and Faecalibaculum compared with those administered with HTST-processed tomato juice. Moreover, HHP-processed tomato juice promoted SCFA levels, which were positively correlated with the enriched Alistieps. Our results show that HHP-processed tomato juice may drive healthy gut microbes and metabolites.

Breast milk preservation: thermal and non-thermal processes and their effect on microorganism inactivation and the content of bioactive and nutritional compounds

Human Breast Milk (HBM) is widely acknowledged as the best nutritional source for neonates. Data indicates that, in 2019, 83.2% of infants in the United States received breast milk at birth, slightly reducing to 78.6% at 1 month. Despite these encouraging early figures, exclusive breastfeeding rates sharply declined, dropping to 24.9% by 6 months. This decline is particularly pronounced when direct breastfeeding is challenging, such as in Neonatal Intensive Care Units (NICU) and for working mothers. Given this, it is vital to explore alternative breast milk preservation methods. Technologies like Holder Pasteurization (HoP), High-Temperature Short-Time Pasteurization (HTST), High-Pressure Processing (HPP), UV radiation (UV), and Electric Pulses (PEF) have been introduced to conserve HBM. This review aims to enhance the understanding of preservation techniques for HBM, supporting the practice of extended exclusive breastfeeding. It explicitly addresses microbial concerns, focusing on critical pathogens like Staphylococcus aureus, Enterococcus, Escherichia coli, Listeria monocytogenes, and Cytomegalovirus, and explores how various preservation methods can mitigate these risks. Additionally, the review highlights the importance of retaining the functional elements of HBM, particularly its immunological components such as antibodies and enzymes like lysozyme and Bile Salt Stimulated Lipase (BSSL). The goal is to provide a comprehensive overview of the current state of HBM treatment, critically assess existing practices, identify areas needing improvement, and advocate for extended exclusive breastfeeding due to its vital role in ensuring optimal nutrition and overall health in infants.

Toxicity, metabolism, and mitigation strategies of acrylamide: a comprehensive review

Acrylamide, a food-borne chemical toxicant, has raised global concern in recent decades. It mainly originated from reducing sugar and free amino acid interactions in the carbohydrate-rich foodstuffs heated at high temperatures. Due to the neurotoxicity and carcinogenicity of AA, the mechanism of formation, toxic effects on health, and mitigation strategies, including conventional approaches and innovative technologies, have been of great interest since its discovery in food. Potato products (especially French fries and crisps), coffee, and cereals(bread and biscuit) are renowned contributors to AA's daily intake. The best preventive methods discussed in the literature include time/temperature optimization, blanching, enzymatic treatment, yeast treatment, additives, pulsed electric fields, ultrasound, vacuum roasting, air frying, and irradiation, exhibiting a high efficacy in AA elimination in food products.

The Application of High-Hydrostatic-Pressure Processing to Improve the Quality of Baked Products: A Review

The current trend in the food industry is towards "clean label" products with high sensory and nutritional quality. However, the inclusion of nutrient-rich ingredients in recipes often leads to sensory deficiencies in baked goods. To meet these requirements, physically modified flours are receiving more and more attention from bakery product developers. There are various findings in the literature on high hydrostatic pressure (HHP) technology, which can be used to modify various matrices so that they can be used as ingredients in the baking industry. HHP treatments can change the functionality of starches and proteins due to cold gelatinization and protein unfolding. As a result, the resulting ingredients are more suitable for nutrient-rich bakery formulations. This review describes the information available in the literature on HHP treatment conditions for ingredients used in the production of bakery products and analyses the changes in the techno-functional properties of these matrices, in particular their ability to act as structuring agents. The impact of HHP-treated ingredients on the quality of dough and bakery products and the effects on some nutritional properties of the treated matrices have been also analysed. The findings presented in this paper could be of particular interest to the bakery industry as they could be very useful in promoting the industrial application of HHP technology.

Plant Protein-Derived Active Peptides: A Comprehensive Review

Active peptides are a class of physiologically active protein fragments, which can be prepared from different sources. In the past few decades, the production of peptides with various effects from different plant proteins continues to receive academic attention. With advances in extraction, purification, and characterization techniques, plant protein-derived active peptides continue to be discovered. They have been proven to have various functional activities such as antioxidant, antihypertensive, immunomodulatory, antimicrobial, anti-inflammatory, antidiabetic, antithrombotic, and so on. In this review, we searched Web of Science and China National Knowledge Infrastructure for relevant articles published in recent years. There are 184 articles included in this manuscript. The current status of plant protein-derived active peptides is systematically introduced, including their sources, preparation, purification and identification methods, physiological activities, and applications in the food industry. Special emphasis has been placed on the problems of active peptide exploration and the future trend. Based on these, it is expected to provide theoretical reference for the further exploitation of plant protein-derived active peptides, and promote the healthy and rapid development of active peptide industry.

Shade of Innovative Food Processing Techniques: Potential Inducing Factors of Lipid Oxidation

With increasing environmental awareness and consumer demand for high-quality food products, industries are strongly required for technical innovations. The use of various emerging techniques in food processing indeed brings many economic and environmental benefits compared to conventional processes. However, lipid oxidation induced by some "innovative" processes is often "an inconvenient truth", which is scarcely mentioned in most studies but should not be ignored for the further improvement and optimization of existing processes. Lipid oxidation poses a risk to consumer health, as a result of the possible ingestion of secondary oxidation products. From this point of view, this review summarizes the advance of lipid oxidation mechanism studies and mainly discloses the shade of innovative food processing concerning lipid degradation. Sections involving a revisit of classic three-stage chain reaction, the advances of polar paradox and cut-off theories, and potential lipid oxidation factors from emerging techniques are described, which might help in developing more robust guidelines to ensure a good practice of these innovative food processing techniques in future.

Pilot Scale Assessment of High-Pressure Processing (HPP) to Enhance Microbiological Quality and Shelf Life of Fresh Ready-to-Eat (RTE) Blue Crab Meat

Blue crab (Callinectes sapidus) is a highly valuable wild fishery species of crab native to the waters of the western Atlantic Ocean and the Gulf of Mexico. The annual commercial production of live blue crabs is approximately 50,000 metric tons with a dockside value of USD 200 million. Presently the US blue crab processing industry sells crab meat in three basic forms: fresh crab meat, pasteurized crab meat, and frozen crab meat. By far "Fresh" is the most desirable form of crab meat. However, fresh crab meat has a limited shelf life. This study evaluated the effects of high-pressure processing (HPP) on enhancing the microbiological quality and shelf life of blue crab meat. Live blue crabs were pressure-cooked in a retort (≥115 °C for 4-6 min). The crab meat was handpicked, packed in plastic containers with seals, subjected to HPP treatment, and stored at 4 °C. Container integrity and water leakage issues were examined by observation in addition to weight comparison before and after HPP treatment; the shelf life of crab meat with and without HPP treatments was examined via microbiological tests and sensory evaluations. Results show that polypropylene containers sealed with 10K OTR (oxygen transmission rate) film could withstand high pressure without water leakage issues; HPP treatment at 600 MPa for 3 min could extend the shelf life of fresh, cooked, and handpicked crab meat from 6 days to 18 days based on the strictest APC (aerobic plate account) limit (APC ≤ 100,000 CFU/g). The sensory quality of the HPP-treated crab meat was well accepted throughout the 3-week storage period. The results support the use of HPP as an effective non-thermal processing technology to enhance the microbiological quality and extend the shelf life of fresh RTE blue crab meat.

Non-thermal technologies for the conservation of açai pulp and derived products: A comprehensive review

Açai (Euterpe oleracea) is one of the main sustainable extractive crops in the Amazon region, widely consumed by the local population and a significant export product. This review presents the current knowledge regarding nonthermal technologies employed in açai processing. This review aims to discuss and compare the main results attained by the application of HPP, ultrasound, ozone, UV light, cold plasma, and pulsed electric field on microbial inactivation, enzymatic inhibition, and the content of anthocyanin and other bioactive compounds after açai pulp processing. The discussion compares these technologies with pasteurization, the current main technology applied to açai sanitization. This review shows that there are still many gaps to be filled concerning açai processing in thermal and non-thermal technologies. Data analysis allowed the conclusion that pasteurization and HPP are, up to now, the only technologies that enable a 5-log CFU reduction of yeasts, molds, and some bacteria in açai. However, no study has reported the inactivation of Trypanosoma cruzi, which is the major gap found in current knowledge. Other technologies, such as pulsed electric field, cold plasma, and ultrasound, require further development and process intensification studies to be as successful as HPP and pasteurization.

-

Thermal processing remains the key processing technology for food products. However, there are some limitations for thermal processing such as loss of sensory and nutritional quality. Furthermore, nowadays consumers are looking forward for fresh like products which are free from chemical preservatives, yet having longer shelf life. Thus, alternative processing techniques are gaining popularity among food processors to replace conventional thermal processing keeping nutritional quality, sensory attributes and food safety in mind. The alternative processing techniques such as ultrasound, gamma irradiation, high pressure processing and microwave treatment causes several modifications (structural changes, effects on swelling and solubility index, gelatinization behaviour, pasting or rheological properties, retrogradation and cooking time) in physicochemical and functional properties of pulse starches which offers several advantages from commercial point of view. This review aims to summarize the effect of different alternative processing techniques on the structure, solubility, gelatinization, retrogradation and pasting properties of various pulse starches.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-022-05557-3.

A review of green methods used in starch-polyphenol interactions: physicochemical and digestion aspects

The interactions of starch with lipids, proteins, and other major food components during food processing are inevitable. These interactions could result in the formation of V-type or non-V-type complexes of starch. The starch-lipid complexes have been intensively studied for over five decades, however, the complexes of starch and polyphenols are relatively less studied and are the subject of recent interest. The interactions of starch with polyphenols can affect the physicochemical properties and its digestibility. The literature has highlighted several green methods such as ultrasound, microwave, high pressure, extrusion, ball-milling, cold plasma etc., to assist interactions of starch with polyphenols. However, comprehensive information on green methods to induce starch-polyphenol interactions is still scarce. Therefore, in light of the importance and potential of starch-polyphenol complexes in developing functional foods with low digestion, this review has summarized the novel green methods employed in interactions of starch with flavonoids, phenolic acids and tannins. It has been speculated that flavonoids, phenolic acids, and tannins, among other types of polyphenols, may have anti-digestive activities and are also revealed for their interaction with starch to form either an inclusion or non-inclusion complex. Further information on the effects of these interactions on physicochemical parameters to understand the chemistry and structure of the complexes is also provided.

Recent developments in applications of physical fields for microbial decontamination and enhancing nutritional properties of germinated edible seeds and sprouts: a review

Germinated edible seeds and sprouts have attracted consumers because of their nutritional values and health benefits. To ensure the microbial safety of the seed and sprout, emerging processing methods involving physical fields (PFs), having the characteristics of high efficiency and environmental safety, are increasingly proposed as effective decontamination processing technologies. This review summarizes recent progress on the application of PFs to germinating edible seeds, including their impact on microbial decontamination and nutritional quality and the associated influencing mechanisms in germination. The effectiveness, application scope, and limitation of the various physical techniques, including ultrasound, microwave, radio frequency, infrared heating, irradiation, pulsed light, plasma, and high-pressure processing, are symmetrically reviewed. Good application potential for improving seed germination and sprout growth is also described for promoting the accumulation of bioactive compounds in sprouts, and subsequently enhancing the antioxidant capacity under favorable PFs processing conditions. Moreover, the challenges and future directions of PFs in the application to germinated edible seeds are finally proposed. This review also attempts to provide an in-depth understanding of the effects of PFs on microbial safety and changes in nutritional properties of germinating edible seeds and a theoretical reference for the future development of PFs in processing safe sprouted seeds.

Heat-Killed Lactobacillus rhamnosus ATCC 7469 Improved UVB-Induced Photoaging Via Antiwrinkle and Antimelanogenesis Impacts

Exposure of ultraviolet B (UVB) radiation is the main factor from the environment to cause skin photoaging. Lactobacillus rhamnosus ATCC 7469, is a probiotic strain with a good track record for enhancing human health. The present study conducted the impacts of heat-killed L. rhamnosus ATCC 7469 (RL) on photoaging in vitro using mouse skin fibroblast (MSF) cells and human epidermal melanocytes (HEM) exposed to UVB. The results showed that (1) RL-protected UVB-induced cytotoxicity relating to absorb UVB and reduce DNA damage. (2) RL exerted the antiwrinkle impact involved in two aspects. Firstly, RL downregulated MMP-1, 2, 3 expressions associating with MAPK signaling, resulting in the increased the protein expression of COL1A1, further booting type I collagen abundant thereby promoting the antiwrinkle impact in MSF cells. Secondly, RL reduced ROS content, further decreasing oxidative damage relating to Nrf2/Sirt3/SOD2 signaling, thereby promoting the antiwrinkle impact in MSF cells. (3) RL suppressed tyrosinase and TYRP-2 activity and/or levels associating with PKA/CREB/MITF signaling, thereby promoting antimelanogenesis impact in HEM cells. In conclusion, our findings suggest that RL could reduce photoaging caused by UVB via antiwrinkle and antimelanogenesis properties and may be a potential antiphotoaging beneficial component, which is applied in the cosmetic industry.

Preparation of Bovine Hides Gelatin by Ultra-High Pressure Technique and the Effect of Its Replacement Fat on the Quality and In Vitro Digestion of Beef Patties

Beef skin gelatin can be used as a good substitute for animal fat in meat patties. In this paper, the effect of different parameters on low-fat beef patties with cowhide gelatin substituted for beef fat (0, 25%, 50%, 75%, 100%) prepared by ultra-high pressure assisted technology was investigated by texture, cooking loss, and sensory scores. The beef patties were also stored at 0-4 °C for 0, 7, 14, 21, and 28 d. The differences and changing rules of fatty acid and amino acid compositions and contents of beef patties with different fat contents were investigated by simulating gastrointestinal digestion in vitro. The optimal process formulation of low-fat beef patties with cowhide gelatin was determined by experimental optimization as follows: ultra-high pressure 360 MPa, ultra-high of pressure time of 21 min, NaCl addition of 1.5%, compound phosphate addition of 0.3%. The addition of cowhide gelatin significantly increased monounsaturated fatty acids, polyunsaturated fatty acids, amino acid content, and protein digestibility of beef patties (p < 0.05). Moreover, with the extension of storage time, the content of saturated fatty acids was significantly higher (p < 0.05), the content of monounsaturated and polyunsaturated fatty acids was significantly lower (p < 0.05), the content of amino acids was significantly lower (p < 0.05), and protein digestibility was significantly lower (p < 0.05) under all substitution ratios. Overall, beef patties with 75% and 100% substitution ratios had better digestibility characteristics. The results of this study provide a theoretical basis for gelatin's potential as a fat substitute for beef patties and for improving the quality of low-fat meat products.

Post-high-pressure temperature and time - Overlooked parameters in high pressure treatment of bacterial spores

High pressure (HP) processing has high potential for bacterial spore inactivation with minimal thermal input. To advance HP germination and subsequent inactivation of spores, this study explored the physiological state of HP-treated spores using flow cytometry (FCM). Bacillus subtilis spores were treated at 550 MPa and 60 °C (very HP (vHP)) in buffer, incubated after the HP treatment, and stained for FCM analysis with SYTO16 indicating germination and propidium iodide (PI) indicating membrane damage. FCM subpopulations were analyzed depending on the HP dwell time (≤20 min), post-HP temperature (ice, 37 °C, 60 °C) and time (≤4 h), germination-relevant cortex-lytic enzymes (CLEs) and small-acid-soluble-proteins-(SASP)-degrading enzymes by using deletion strains. The effect of post-HP temperatures (ice, 37 °C) was additionally studied for moderate HP (150 MPa, 38 °C, 10 min). Post-HP incubation conditions strongly influenced the prevalence of five observed FCM subpopulations. Post-HP incubation on ice did not or only slowly shifted SYTO16-positive spores to higher SYTO16 levels. At 37 °C post-HP, this shift accelerated, and a shift to high PI intensities occurred depending on the HP dwell time. At 60 °C post-HP, the main shift was from SYTO16-positive to PI-positive subpopulations. The enzymes CwlJ and SleB, which are CLEs, seemed both necessary for PI or SYTO16 uptake, and to have different sensitivities to 550 MPa and 60 °C. Different extents of SASP degradation might explain the existence of two SYTO16-positive subpopulations. Shifts to higher SYTO16 intensities during post-HP incubation on ice or at 37 °C might rely on the activity and recovery of CLEs, SASP-degrading enzymes or their associated proteins from reversible HP-induced structural changes. These enzymes seemingly become active only during decompression or after vHP treatments (550 MPa, 60 °C). Based on our results, we provide a refined model of HP germination-inactivation of B. subtilis spores and an optimized FCM method for quantification of the safety-relevant subpopulation, i.e., vHP (550 MPa, 60 °C) superdormant spores. This study contributes to the development of mild spore inactivation processes by shedding light on overlooked parameters: post-HP incubation conditions. Post-HP conditions significantly influenced the physiological state of spores, likely due to varying enzymatic activity. This finding may explain inconsistencies in previous research and shows the importance of reporting post-HP conditions in future research. Furthermore, the addition of post-HP conditions as HP process parameter may open up new possibilities to optimize HP-based inactivation of spores for potential industrial applications in the food industry.

Legume protein/polysaccharide food hydrogels: Preparation methods, improvement strategies and applications

For the development of innovative foods and nutritional fortification, research into food gel is essential. As two types of rich natural gel material, both legume proteins and polysaccharides have high nutritional value and excellent application potential, attracting wide attention worldwide. Research has focused on combining legume proteins with polysaccharides to form hybrid hydrogels as their combinations show improved texture and water retention compared to single legume protein or single polysaccharide gels, and these properties can be tailored for specific applications. This article reviews hydrogels of common legume proteins and discusses heat induction, pH induction, salt ion induction, and enzyme-induced assembly of legume protein/polysaccharide mixtures. The applications of these hydrogels in fat replacement, satiety enhancement, and delivery of bioactive ingredients are discussed. Challenges for future work are also highlighted.

Behavior of enzymes under high pressure in food processing: mechanisms, applications, and developments

High pressure processing (HPP) offers the benefits of safety, uniformity, energy-efficient, and low waste, which is widely applied for microbial inactivation and shelf-life extension for foods. Over the past forty years, HPP has been extensively researched in the food industry, enabling the inactivation or activation of different enzymes in future food by altering their molecular structure and active site conformation. Such activation or inactivation of enzymes effectively hinders the spoilage of food and the production of beneficial substances, which is crucial for improving food quality. This paper reviews the mechanism in which high pressure affects the stability and activity of enzymes, concludes the roles of key enzymes in the future food processed using high pressure technologies. Moreover, we discuss the application of modified enzymes based on high pressure, providing insights into the future direction of enzyme evolution under complex food processing conditions (e.g. high temperature, high pressure, high shear, and multiple elements). Finally, we conclude with prospects of high pressure technology and research directions in the future. Although HPP has shown positive effects in improving the future food quality, there is still a pressing need to develop new and effective combined processing methods, upgrade processing modes, and promote sustainable lifestyles.

Comparison of high pressure and thermal pasteurization on the quality parameters of strawberry products: a review

Strawberry (Fragaria ananassa) is rich in bioactive compounds with high antioxidant activity. High pressure processing (HPP) is an efficient alternative to preserve these bioactive compounds in terms of microbial inactivation and shelf-life stability. This review compares the effects of pasteurization methods using high pressure or thermal pasteurization (TP) on the quality parameters of various strawberry-based products. To summarize, most of the high pressure-treated products are microbiologically stable and showed minimum degradation of thermolabile compounds than TP-treated ones. However, some studies reported that high pressure did not have an advantage over TP especially in the preservation of phenolic phytochemicals during storage. The insufficient enzyme inactivation and high residual activity of enzymes after high pressure treatment could cause anthocyanins degradation thus affecting the product quality. Overall, this review could be valuable to potential processors in evaluating the effective commercialization of high pressure-treated strawberry products.

Equivalent processing for pasteurization of a pineapple juice-coconut milk blend by selected nonthermal technologies

Identifying equivalent processing conditions is critical for the relevant comparison of food quality attributes. This study investigates equivalent processes for at least 5-log reduction of Escherichia coli and Listeria innocua in pineapple juice-coconut milk (PC) blends by high-pressure processing (HPP), pulsed electric fields (PEF), and ultrasound (US) either alone or combined with other preservation factors (pH, nisin, and/or heat). The two blends (pH 4 and 5) and coconut milk (pH 7) as a reference were subjected to HPP at 300-600 MPa, 20°C for 0.5-30 min; PEF at an electric field strength of 10-21 kV/cm, 40°C for 24 µs; and US at 120 µm amplitude, 25 or 45°C for 6 or 10 min. At least a 5-log reduction of E. coli was achieved at pH 4 by HPP at 400 MPa, 20°C for 1 min; PEF at 21 kV/cm, 235 Hz, 40°C for 24 µs; and US at 120 µm, 45°C for 6 min. As L. innocua showed greater resistance, a synergistic lethal effect was provided at pH 4 by HPP with 75 ppm nisin at 600 MPa, 20°C for 5 min; PEF with 50 ppm nisin at 18 kV/cm, 588 Hz, 40°C for 24 µs; and US at 45°C, 120 µm for 10 min. The total soluble solids (11.2-12.4°Bx), acidity (0.47%-0.51% citric acid), pH (3.91-4.16), and viscosity (3.55 × 10^-3 -4.0 × 10^-3  Pa s) were not significantly affected under the identified equivalent conditions. HPP was superior to PEF and US, achieving higher ascorbic acid retention and lower color difference in PC blend compared to the untreated sample.

Ultrasonic treatment maintains the flavor of the melon juice

Thermal treatment usually leads to the flavor deterioration of melon juice. This study was initiated to evaluate the retention effect of ultrasonic (US) and ultra-high pressure (UHP) on volatile components of melon juice by gas chromatography-mass spectrometer (GC-MS) and gas chromatography-ion mobility spectrometry (GC-IMS). The electronic nose, electronic tongue, and GC-IMS analysis showed that US was much better way to contain the flavor of melon juice than UHP was does. The correlation coefficient between the US and the control was as high as 0.99. The concentration of characteristic aroma components in melon juice after ultrasonic treatment was 2.77 times and 3.02 times higher than that in the control and UHP, respectively. Moreover, the US treatment gave no significant difference in the total soluble solids, pH, and color of the juice. And it dramatically enhanced the flavor profile of melon juice.

Microbial inactivation and quality impact assessment of red pepper paste treated by high pressure processing

The study aimed to investigate inactivation of naturally occurring microorganisms and quality of red pepper paste treated by high pressure processing (HPP). Central composite rotatable design was employed to determine the impacts of pressure (100-600 MPa) and holding time (30-600 s). HPP at 527 MPa for 517 s reduced aerobic mesophilic bacteria count by 4.5 log CFU/g. Yeasts and molds counts were reduced to 1 log CFU/g at 600 MPa for 315 s. Total phenols, carotenoids and antioxidants activity ranged from 0.28 to 0.33 g GAE/100 g, 96.0-98.4 mg βc/100 g and 8.70-8.95 μmol TE/g, respectively. Increase (2.5-6.7%) in these variables was observed with increasing pressure and holding time. Total color difference (ΔE∗) values (0.2-2.8) were within the ranges of 'imperceptible' to 'noticeable'. Experimental results were fitted satisfactorily into quadratic model with higher R² values (0.8619-0.9863). Optimization process suggested treatment of red pepper paste at 536 MPa for 125 s for maximum desirability (0.622). Validation experiments confirmed comparable percentage of relative errors. Overall, this technique could be considered as an efficient treatment for the inactivation of microorganisms that naturally occur in red pepper paste with minimal changes in its characteristics.

Effect of High-Pressure Treatments on the Properties of Food Packaging Materials with or without Antimicrobials

The aim of this research work was the comparative study of the different properties of interest in the case of plastic materials for food use before and after being subjected to treatment by high hydrostatic pressure (HHP) as well as the impact of additivation with antimicrobials. This method of food preservation is currently on the rise and is of great interest because it is possible to extend the shelf life of many foods without the need for the use of additives or thermal processing, as is the case with other preservation methods currently used. The effects of HHP treatment (680 MPa for 8 min) on plastic materials commonly used in the food industry were studied. These materials, in sheet or film form, were polyethylene (PE), polyethylene terephthalate (PET), polystyrene (PS), multilayer polyethylene terephthalate-ethylene-vinyl alcohol copolymer-polyethylene (PET-EVOH-PE), multilayer polyethylene-polyethylene terephthalate (PE-PET), polyvinyl chloride aluminum (PVC-AL), and polylactic acid (PLA), which were provided by manufacturing companies in the sector. PE, PP, and PLA activated with tyrosol, zinc oxide, or zinc acetate were also tested. The phenomena and properties, such as overall migration, thermal behavior, oxygen barrier, and physical properties were analyzed before and after the process. The results show that the HHP process only slightly affected the properties of the materials. After pressurization, oxygen permeability increased greatly in PVC-AL (from 7.69 to 51.90) and decreased in PLA (from 8.77 to 3.60). The additivation of the materials caused a change in color and an increase in oxygen permeability. The additivated PE and PP showed migration values above the legal limit for certain simulants. The HHP treatment did not greatly affect the mechanical properties of the additivated materials. The main increases in the migration after HHP treatment were observed for PE activated with tyrosol or zinc oxide and for PS activated with zinc oxide. Activated PLA performed the best in the migration studies, irrespective of the HHP treatment. The results suggest that activated PLA could be used in HHP food processing as an inner antimicrobial layer in contact with the food packed in a container with the desired oxygen permeability barrier.

High-pressure treatment enhanced aromatic compound concentrations of melon juice and its mechanism

Introduction

The flavor deterioration blocks the development of melon juice.

Methods

The effects of ultra-high temperature (UHT) and high pressure (HP) treatments on the aromatic compound concentrations of melon juice and their mechanisms were explored with fresh juice as the control.

Results

A total of 57 volatile compounds were identified by gas chromatography-tandem mass spectrometry analysis. β-ionone was shown to be the major aromatic component of melon juice for the first time. The HP at 200 MPa for 20 min increased the total volatile concentration of melon juice by 1.54 and 3.77 times the control and UHT, respectively. Moreover, the sum concentration of a major aromatic component in the HP treatment was 1.49 and 5.94 times higher than that of the control and UHT, respectively.

Discussion

The HP treatment raised the concentration of volatile and aromatic components of melon juice by reducing their surface tension.

Recent advances in sterilization and disinfection technology: A review

Sterilization and disinfection of pollutants and microorganisms have been extensively studied in order to address the problem of environmental contamination, which is a crucial issue for public health and economics. Various form of hazardous materials/pollutants including microorganisms and harmful gases are released into the environment that enter into the human body either through inhalation, adsorption or ingestion. The human death rate rises due to various respiratory ailments, strokes, lung cancer, and heart disorders related with these pollutants. Hence, it is essential to control the environmental pollution by applying economical and effective sterilization and disinfections techniques to save life. In general, numerous forms of traditional physical and chemical sterilization and disinfection treatments, such as dry and moist heat, radiation, filtration, ethylene oxide, ozone, hydrogen peroxide, etc. are known along with advanced techniques. In this review we summarized both advanced and conventional techniques of sterilization and disinfection along with their uses and mode of action. This review gives the knowledge about the advantages, disadvantages of both the methods comparatively. Despite, the effective solution given by the advanced sterilization and disinfection technology, joint technologies of sterilization and disinfection has proven to be more effective innovation to protect the indoor and outdoor environments.

Effects of high-pressure processing on the physicochemical properties and glycemic index of fruit puree in a hyperglycemia mouse model

BACKGROUND

In this study, the duration of high-pressure processing (HPP) required to achieve a 5 log reduction of Escherichia coli O157:H7 in fruit purees was evaluated. Banana, cantaloupe, and dragon fruit purees were subjected to HPP at 600 MPa for 300, 270, and 270 s, respectively, and their physicochemical properties and enzyme activities were then analysed. Diabetic mice were fed fresh and HPP-treated purees to observe their effects on the glycemic index (GI) and postprandial blood glucose response.

RESULTS

Compared with their fresh counterparts, the HPP-treated banana and dragon fruit purees exhibited significantly higher viscosities, lower glucose concentrations, and higher glucose dialysis retardation indices and showed disrupted sucrose invertase and polygalacturonase activities. The GI and postprandial blood glucose response were not significantly different between the fresh and HPP-treated cantaloupe purees. By contrast, the peak time of glucose response (T_max ) was delayed from 30 min to 60 min, and the area under the receiver operating characteristic curve was reduced by 40% in the mice fed HPP-treated banana and dragon fruit purees. The GIs of the HPP-treated banana and dragon fruit purees (were 50.3 and 44.8, respectively) were significantly lower than those of their fresh counterparts (85.1 and 75.2, respectively).

CONCLUSION

HPP can change the physicochemical properties of fruit purees, resulting in stabilized blood glucose levels and lower GIs after consumption. Therefore, purees processed in this manner would benefit consumers and patients with diabetes/pre-diabetes who need to maintain stable blood glucose levels (Fig. S1). © 2022 Society of Chemical Industry.

Dispersion assisted pretreatment for enhanced anaerobic biodegradability and biogas recovery -strategies and applications

Disperser assisted homogenization is a promising mechanical based disintegration process to improve the substrate biodegradability and biogas recovery from biomass. During dispersion, the extent of liquefaction relies on the dispersion parameters and biomass properties. Hence, assessment of the optimal parameters varies with type of disperser and biomass. Dispersion assisted homogenization of some biomass such as sludge is not only studied in lab scale but also investigated in full scale plants providing positive outcome. For instance, the large-scale investigation of disperser homogenization has attained nearly 40-50 percent increment in bioenergy recovery. However, research gaps in terms of energy and cost efficiency still exists. This review paper outlines the impact of disperser parameters, its efficiency in biomass disintegration and biogas recovery. It has been proposed to combine homogenization process in the bioenergy generation to investigate the energy and cost efficiency of the entire process.

Meat texture modification for dysphagia management and application of hydrocolloids: A review

Dysphagia is a medical condition that describes the difficulty of swallowing food, and texture modified food (TMF) is the best intervention for dysphagia. The relevant guidelines to identify dysphagia food are provided by the International Dysphagia Diet Standardization Initiative (IDDSI). Developing texture modified meat is a challenging task due to its fibrous microstructure and harder texture. Various meat tenderization attempts are therefore evaluated in the literature. Meat texture modification for dysphagia is not just limited to tenderization but should be focused on safe swallowing attributes as well. The application of hydrocolloids for designing TMF has a major research focus as it is a cost-effective method and offers an opportunity for careful control. The present review focuses on the meat texture modification attempts that have been used in the past and present, with special attention to the use of hydrocolloids. Several studies have shown improvements in texture upon the addition of various hydrocolloids; however, few studies have attempted to develop texture modified meat for people with dysphagia. This area has to be further developed along with the sensory evaluations conducted with the dysphagia population, to validate the industrial application of hydrocolloids to TMF.

Antimicrobial Resistance, Biocide Tolerance, and Bacterial Diversity of a Dressing Made from Coriander and Parsley after Application of Treatments Using High Hydrostatic Pressure Alone or in Combination with Moderate Heat

The effects of high-hydrostatic pressure (HP) treatments (450 and 600 megapascals, MPa, for 5 min at temperatures of 22 °C and 50 °C) on the microbiota of a coriander and parsley dressing was studied via culture-dependent and culture-independent approaches. Samples were refrigerated for 20 days, with periodic counts of the culture media supplemented with, or without, antimicrobials. HP-treated samples showed significantly lower viable cell counts compared to untreated controls. Only the control samples yielded bacterial growth on media with antimicrobials (imipenem, cefotaxime, benzalkonium chloride), including mostly Pseudomonas and Lactobacillus. Bacillus and Paenibacillus were identified from pressurized samples. Few isolates showed higher tolerance to some of the biocides tested. Pseudomonads showed outstanding resistance to meropenem and ceftazidime. According to high-throughput sequencing analysis, the microbiota of the dressing control samples changes during storage, with a reduction in the relative abundance of Proteobacteria and an increase in Firmicutes. The composition of the residual microbiota detected during storage was highly dependent on the pressure applied, and not on the treatment temperature.

Recent advancements, trends, fundamental challenges and opportunities in spray deposited cellulose nanofibril films for packaging applications

Plastic packaging is causing a serious environmental concern owing to its difficulty in degrading and micro-particulates' emissions. Developing biodegradable films has gained research attention to overcome ecological and health issues associated with plastic based packaging. One alternative substitute for petroleum-based plastic is nanocellulose based films, having distinguishing characteristics such as biodegradability, renewability, and non-toxicity. Nanocellulose is classified into three major types, i.e., cellulose nanofibril, cellulose nanocrystals, and bacterial nanocellulose. However, the scope of this review is limited to cellulose nanofibril (CNF) because this is the only one of major types that could be turned into film at a competitive cost with petroleum derived polymers. This paper provides a concise insight on the current trends and production methods of CNF. Additionally, the methods for transforming CNF into films are also discussed in this review. However, the focus of this review is the CNF films produced via spray deposition, their properties and applications, and fundamental challenges associated with their commercialization. Spray deposition or spray coating is an ideal candidate as a large-scale production technique of CNF films due to its remarkable features such as rapidity, flexibility, and continuity. Spray deposited CNF films exhibit excellent mechanical properties and oxygen barrier performance, while, possessing limited moisture barrier performance. The possible pathways to improve the moisture barrier performance and optical properties of these films are also discussed in this review. The existing publications on spray deposited CNF films are also highlighted from the literature. Finally, the current status of industrial production of these films and opportunities for academics and industries are also presented, indicating that fibre production capacity needs to be enhanced.

Potential Use of Emerging Technologies for Preservation of Rice Wine and Their Effects on Quality: Updated Review

Rice wine, a critical fermented alcoholic beverage, has a considerable role in different cultures. It contains compounds that may have functional and nutritional health benefits. Bacteria, yeasts, and fungi commonly found in rice wines during fermentation can induce microbial spoilage and deterioration of the quality during its distribution and aging processes. It is possible to control the microbial population of rice wines using different preservation techniques that can ultimately improve their commercial shelf life. This paper reviews the potential techniques that can be used to preserve the microbial safety of rice wines while maintaining their quality attributes and further highlights the advantages and disadvantages of each technique.

Impact of High-Pressure Processing (HPP) on Selected Quality and Nutritional Parameters of Cauliflower (Brassica oleracea var. Botrytis)

In recent years, innovative food processing methods, such as high-pressure processing (HPP) treatment, have been shown to improve food quality. The purpose of this work was to determine the effects of high-pressure processing (HPP; 400 and 600 MPa for 2 or 5 min, 20 °C) of cauliflower. Microbial shelf-life (total aerobic count and spores), texture, color, drip loss, dry matter, antioxidative capacity, total phenolic content, and ascorbic acid were analyzed before and after processing, as well as during storage (4 °C) for up to 42 days. Among the different treatments, HPP at 600 MPa exhibited low microbial counts between days 14 and 28 of storage, while at 400 MPa already had high bacterial counts between days 7 and 14. HPP at both 400 and 600 MPa was the best method to maintain the color during storage. The texture of the cauliflower did not differ from the control during storage for HPP. For all samples, the dry matter content remained stable during storage, with few differences between treatments. The nutritional quality of high-pressure-processed cauliflower at 600 MPa for 2 min remained high until day 28. The overall results of this study demonstrate that HPP has the potential to preserve the quality of cauliflower.

Conventional and Novel Technologies in the Production of Dairy Bioactive Peptides

Background

In recent years, researchers have focused on functional ingredients, functional foods, and nutraceuticals due to the rapidly increasing interest in bioactive components, especially in bioactive peptides. Dairy proteins are a rich and balanced source of amino acids and their derived bioactive peptides, which possess biological and physiological properties. In the dairy industry, microbial fermentation and enzymatic hydrolysis are promising methods for producing bioactive peptides because of their rapid efficiency, and mild reaction conditions. However, these methods utilize less raw material, take long reaction time, result in low yields, and low activity products when used alone, which pose industry to seek for novel methods as pretreatments to increase the yield of bioactive peptides.

Scope and Approach

This review emphasizes the production of peptides from the dairy proteins and discusses the potential use of novel technologies as pretreatments to conventional methods of bioactive peptides production from dairy proteins, including the mechanisms of novel technologies along with respective examples of use, advantages, limitations, and challenges to each technology.

Key Findings and Conclusion

Noteworthily, hydrolysis of dairy proteins liberate wide-range of peptides that possess remarkable biological functions to maintain human health. Novel technologies in the dairy industry such as ultrasound-assisted processing (UAP), microwave-assisted processing (MAP), and high pressure processing (HPP) are innovative and environmentally friendly. Generally, novel technologies are less effectual compared to conventional methods, therefore used in combination with fermentation and enzymatic hydrolysis, and are promising pretreatments to modify peptides’ profile, improve the yields, and high liberation of bioactive peptides as compared to conventional technologies. UAP is an innovative and most efficient technology as its mechanical effects and cavitation change the protein conformation, increase the biological activities of enzymes, and enhance enzymatic hydrolysis reaction rate.

Non-thermal Processing Technologies for Dairy Products: Their Effect on Safety and Quality Characteristics

Thermal treatment has always been the processing method of choice for food treatment in order to make it safe for consumption and to extend its shelf life. Over the past years non-thermal processing technologies are gaining momentum and they have been utilized especially as technological advancements have made upscaling and continuous treatment possible. Additionally, non-thermal treatments are usually environmentally friendly and energy-efficient, hence sustainable. On the other hand, challenges exist; initial cost of some non-thermal processes is high, the microbial inactivation needs to be continuously assessed and verified, application to both to solid and liquid foods is not always available, some organoleptic characteristics might be affected. The combination of thermal and non-thermal processing methods that will produce safe foods with minimal effect on nutrients and quality characteristics, while improving the environmental/energy fingerprint might be more plausible.