Enzymatic Approaches for Structuring Starch to Improve Functionality

Bottom-Up Synthesized Glucan Materials: Opportunities from Applied Biocatalysis

Linear d-glucans are natural polysaccharides of simple chemical structure. They are comprised of d-glucosyl units linked by a single type of glycosidic bond. Noncovalent interactions within, and between, the d-glucan chains give rise to a broad variety of macromolecular nanostructures that can assemble into crystalline-organized materials of tunable morphology. Structure design and functionalization of d-glucans for diverse material applications largely relies on top-down processing and chemical derivatization of naturally derived starting materials. The top-down approach encounters critical limitations in efficiency, selectivity, and flexibility. Bottom-up approaches of d-glucan synthesis offer different, and often more precise, ways of polymer structure control and provide means of functional diversification widely inaccessible to top-down routes of polysaccharide material processing. Here the natural and engineered enzymes (glycosyltransferases, glycoside hydrolases and phosphorylases, glycosynthases) for d-glucan polymerization are described and the use of applied biocatalysis for the bottom-up assembly of specific d-glucan structures is shown. Advanced material applications of the resulting polymeric products are further shown and their important role in the development of sustainable macromolecular materials in a bio-based circular economy is discussed.

Characterizations and film-forming properties of different fractionated high-amylose maize starches subjected to hydroxypropylation

Dual-modifications of jet milling and hydroxypropylation were used to improve the functional properties of maize starch (HM, containing 67 % amylose). The fractions obtained in three sizes (HM-S, HM-M, HM-L) were further treated with 10 % and 30 % propylene oxide (PO10 and PO30). The infrared peak of starch at 2794 cm-1 indicated the successful introduction of hydroxypropyl groups. The molar degree of substitution (MS) increased with the degree of jet milling. The MS of HM-L-PO10 is 0.4, that of HM-M-PO10 is 0.7, and that of HM-S-PO10 is 0.9. The crystallinity of dual-modified HM increased, but the crystal type remained unchanged, still being B-type. Dual-modification significantly improved the performance of starch, and the higher the degree of modification, the better the optimization effect. The lowest enthalpy changes of gelatinization (ΔH = 3.49 J/g), the best freeze-thaw stability, the highest elongation at break (110.42 %) and transmittance (81.22 %) were shown in HM-S-PO30. The present study confirms that HM-S-PO30 films have the best physicochemical and mechanical properties, which provide new insights into optimizing starch-based packaging materials.

Dielectric barrier discharge cold plasma modifies the multiscale structure and functional properties of banana starch

Banana starch has attracted significant attention due to its abundant content of resistant starch. This study aims to compare the multiscale structure and functional properties of banana starch obtained from five cultivated varieties and investigate the impact of dielectric barrier discharge cold plasma (DBD) treatment on these starch characteristics. All five types of natural banana starch exhibited an elliptical and irregular shape, conforming to the CB crystal structure, with a bimodal distribution of branch chain lengths. The resistant starch content ranged from 88.9 % to 94.1 %. Variations in the amylose content, amylopectin branch chain length distribution, and structural characteristics resulted in differences in properties such as gelatinization behavior and sensitivity to DBD treatment. The DBD treatment inflicted surface damage on starch granules, reduced the amylose content, shortened the amylopectin branch chain length, and changed the relative crystallinity to varying degrees. The DBD treatment significantly increased starch solubility and light transmittance. Simultaneously, it resulted in a noteworthy decrease in peak viscosity and gelatinization enthalpy of starch paste. The in vitro digestibility test showed that 76.2 %-86.5 % of resistant starch was retained after DBD treatment. The DBD treatment renders banana starch with reduced viscosity, increased paste transparency, enhanced solubility, and broadens its potential application.

Bioinformatics and functional selection of GH77 4-α-glucanotransferases for potato starch modification

4-α-glucanotransferases (4αGTs, EC 2.4.1.25) from glycoside hydrolase family 77 (GH77) catalyze chain elongation of starch amylopectin chains and can be utilized to structurally modify starch to tailor its gelation properties. The potential relationship between the structural design of 4αGTs and functional starch modification is unknown. Here, family GH77 was mined in silico for enzyme candidates based on sub-grouping guided by Conserved Unique Peptide Patterns (CUPP) bioinformatics categorization. From + 12,000 protein sequences a representative set of 27 4αGTs, representing four different domain architectures, different bacterial origins and diverse CUPP groups, was selected for heterologous expression and further study. Most of the enzymes catalyzed starch modification, but their efficacies varied substantially. Five of the 4αGTs were characterized in detail, and their action was compared to that of the industrial benchmark enzyme, Tt4αGT (CUPP 77_1.2), from Thermus thermophilus. Reaction optima of the five 4αGTs ranged from ∼40-60 °C and pH 7.3-9.0. Several were stable for a minimum 4 h at 70 °C. Domain architecture type A proteins, consisting only of a catalytic domain, had high thermal stability and high starch modification ability. All five novel 4αGTs (and Tt4αGT) induced enhanced gelling of potato starch. One, At4αGT from Azospirillum thermophilum (CUPP 77_2.4), displayed distinct starch modifying abilities, whereas T24αGT from Thermus sp. 2.9 (CUPP 77_1.2) modified the starch similarly to Tt4αGT, but slightly more effectively. T24αGT and At4αGT are thus interesting candidates for industrial starch modification. A model is proposed to explain the link between the 4αGT induced molecular modifications and macroscopic starch gelation.

Extrusion-blown oxidized starch/poly(butylene adipate-co-terephthalate) biodegradable active films with adequate material properties and antimicrobial activities for chilled pork preservation

Food safety concerns from spoilage and non-degradable packaging risk human health. Progress made in biodegradable plastic films, but limited study on biomass composite films with favorable morphological, mechanical, and inherent antibacterial properties for fresh meat preservation. Herein, we present a versatile packaging film created through the extrusion blowing process, combining oxidized starch (OST) with poly(butylene adipate-co-terephthalate) (PBAT). SEM analysis revealed even distribution of spherical OST particles on film's surface. FTIR spectra revealed new intermolecular hydrogen bonds between OST and PBAT. While combining OST slightly reduced tensile properties, all composite films met the required strength of 16.5 ± 1.39 MPa. Notably, films with 40 % OST showed over 98 % antibacterial rate against Staphylococcus aureus within 2 h. pH wasn't the main cause of bacterial growth inhibition; OST hindered growth by interfering with nutrient absorption and metabolism due to its carboxyl groups. Additionally, OST disrupted bacterial membrane integrity and cytoplasmic membrane potential. Remarkably, the OST/PBAT film excellently preserved chilled fresh pork, maintaining TVB-N level at 12.6 mg/100 g on day 6, microbial count at 105 CFU/g within 6-10 days, and sensory properties for 8 days. It extended pork's shelf life by two days compared to polyethylene film, suggesting an alternative to a synthetic material.

Interaction between starch and dietary compounds: New findings and perspectives to produce functional foods

Due to the increased prevalence of overweight, obesity, diabetes, colon cancer, cardiovascular diseases, and metabolic syndrome, dietary approaches to reduce starch digestion and regulate glucose homeostasis have gained attention. Starch is a polysaccharide in most daily food consumed as bakery products, snacks, breakfast cereals, and pasta, which are often vilified. However, it is also present in beans, lentils, and oatmeal, which are considered healthy food products. The difference relays on the food matrix and the thermal process that can produce interactions between starch and dietary compounds (protein, lipid, non-starch polysaccharide, and bioactive compounds) or among starch chains (retrogradation). Such interactions produce structural changes so the digestive enzymes cannot hydrolyze them; additionally, the physical barrier of some macromolecules (proteins, hydrocolloids) restricts starch gelatinization and accessibility of the digestive enzymes to hydrolyze the starch. The interactions mentioned above and the use of some macromolecules as physical barriers could be explored as a pathway to develop functional foods. This review analyzes the interactions between starch and dietary compounds influenced by the processing of some food matrices to better understand their potential for developing functional foods.

Development of phytoglycogen-derived core-shell-corona nanoparticles complexed with conjugated linoleic acid

Phytoglycogen-derived self-assembled nanoparticles (SMPG/CLA) and enzymatic-assembled nanoparticles (EMPG/CLA) were fabricated for delivery of conjugated linoleic acid (CLA). After measuring the loading rate and yield, the optimal ratio for both assembled host-guest complexes was 1 : 10, and the maximum loading rate and yield for EMPG/CLA were 1.6% and 88.1%, respectively, higher than those of SMPG/CLA. Structural characterization studies showed that the assembled inclusion complexes were successfully constructed, and had a specific spatial architecture with inner-core amorphous and external-shell crystalline parts. A higher protective effect against oxidation of EMPG/CLA was observed than that of SMPG/CLA, supporting efficient complexation for a higher order crystalline structure. After 1 h of gastrointestinal digestion under the simulated conditions, 58.7% of CLA was released from EMPG/CLA, which was lower than that released from SMPG/CLA (73.8%). These results indicated that in situ enzymatic-assembled phytoglycogen-derived nanoparticles might be a promising carrier platform for protection and targeted delivery of hydrophobic bioactive ingredients.

Molecular structure and characteristics of phytoglycogen, glycogen and amylopectin subjected to mild acid hydrolysis

The structure and properties of phytoglycogen and glycogen subjected to acid hydrolysis was investigated using amylopectin as a reference. The degradation took place in two stages and the degree of hydrolysis was in the following order: amylopectin > phytoglycogen > glycogen. Upon acid hydrolysis, the molar mass distribution of phytoglycogen or glycogen gradually shifted to the smaller and broadening distribution region, whereas the distribution of amyopectin changed from bimodal to monomodal shape. The kinetic rate constant for depolymerization of phytoglycogen, amylopectin, and glycogen were 3.45 × 10^-5/s, 6.13 × 10^-5/s, and 0.96 × 10^-5/s, respectively. The acid-treated sample had the smaller particle radius, lower percentage of α-1,6 linkage as well as higher rapidly digestible starch fractions. The depolymerization models were built to interpret the structural differences of glucose polymer during acid treatment, which would provide guideline to improve the structure understanding and precise application of branched glucan with desired properties.

Biosynthesis of maltodextrin-derived glucan dendrimer using microbial branching enzyme

Glucan dendrimers were developed with microbial branching enzyme (BE) treated maltodextrin. The molecular weight (M_w) of recombinant BE was 79.0 kDa, and its optimum activity was observed at pH 7.0 and 70 °C. BE converted different maltodextrins with dextrose equivalent value of 6 (MD6), 12 (MD12), or 19 (MD19) into the given glucan dendrimers, along with the marked increment of the molecular density (approximately 30-60 folds) and α-1,6 linkage percentage (up to 7.3-9.7%). Among three glucan dendrimers, the enzyme-treated MD12 showed a more homogeneous M_w distribution with the maximum M_w of 5.5 × 10⁶ g/mol, indicating that higher substrate catalytic specificity of BE for MD12 substrate. During transglycosylation with MD12 for 24 h, the shorter chains (degree of polymerization, DP < 13) increased from 73.9% to 83.0%, accompanying by a reduction of medium chains (DP13-24) and long chains (DP > 24). Moreover, the slowly digestible and resistant nutritional fractions were increased by 6.2% and 12.5%, respectively. The results suggested that the potentiality of BE structuring glucan dendrimer with tailor-made structure and functionality for industrial application.

Fabrication of phytoglycogen-derived core-shell nanoparticles: Structure and characterizations

The objective of this work was to investigate the fabrication of core-shell nanoparticles using phosphorylase-catalyzed chain extension of phytoglycogen, and to analyze the changes of structure and characterizations in detail. During the glucosylation reaction, the inorganic phosphate increased substantially up to 2.3 mg/mL in the initial 12 h, and then increased incrementally to 2.5 mg/mL at 24 h. The similar to trends was observed for increasing Mw and Rz over time, due to glucosyl transfers on the surface chain to form a corona around the phytoglycogen core with a larger size. Phosphorylase modification increases the percentages of longer chain fractions and the average chain length increased from degree of polymerization (DP) 11.6 to DP 48.2. The modified phytoglycogen exhibited the characteristic of B-type crystalline structure, indicating that the specific core-shell nanoparticle with inner amorphous nature and outer crystalline layer. The above results revealed that the potentiality of enzymatic chain elongation of phytoglycogen to design novel core-shell nanoparticle with tailor-made structure and functionality.

Biomimetic synthesis of maltodextrin-derived dendritic nanoparticle and its structural characterizations

The maltodextrin-derived dendritic nanoparticle was fabricated using microbial branching enzyme and its structural characterizations were investigated. During biomimetic synthesis, molecular weight distribution of maltodextrin substrate with 6.8 × 10⁴ g/mol shifted to the narrower and uniform distribution region with the larger molecular weight up to 6.3 × 10⁶ g/mol (MD12). The enzyme-catalyzed product had the larger size, higher molecular density as well as higher percentage of α-1,6 linkage, accompanying by more chain accumulations of DP 6-12 and disappearance of DP > 24, suggesting the biosynthesized glucan dendrimer had a compact tighter branched structure. The interaction of molecular rotor CCVJ and local structure of dendrimer was monitored, displaying there was a higher intensity related with the numerous nano-pockets at the branch points of MD12. The maltodextrin-derived dendrimers had the single spherical particulate shape with the size range of 10-90 nm. The mathematical models were also established to reveal the chain structuring during enzymatic reaction. The above results showed that the biomimetic strategy for novel dendritic nanoparticle with controllable structure arising from branching enzyme treated maltodextrin, which would help to enlarge the panel of available dendrimer.

Association of Slowly Digestible Starch Intake with Reduction of Postprandial Glycemic Response: An Update Meta-Analysis

Slowly digestible starch (SDS) has been shown to digest slowly throughout the entire small intestine, generating slow and prolonged release of glucose, according to the in vitro Englyst assay. The aim of this work was to conduct a meta-analysis of up-to-date evidence to evaluate the association between SDS consumption and a reduction in the postprandial glycemic response, including extended glycemic index (EGI) or glycemic profile (GP) parameters, during in vivo digestion. We searched the Web of Science, PubMed, Europe PMC, Cochrane Library, and Embase to identify related articles published up to September 2022. Human trials investigating the effect of the SDS amount on the postprandial glucose profile were estimated at the standard mean difference (SMD), with a 95% confidence interval (CI), using random effect models. The review followed the systematic reviews and meta-analyses (PRISMA) guidelines. The meta-analysis included a total of 65 participants. The results revealed that the EGI experienced a greater increase (SMD = 24.61, I2 = 79.2%, p < 0.01) after SDS intake, while the GP exhibited similar trends (SMD = 29.18, I2 = 73.3%, p < 0.01). High heterogeneity vanished in the subgroup and sensitivity analysis (EGI: I2 = 14.6%, p = 0.31; GP: I2 = 0.0%, p = 0.97). There was no evidence of publication bias for EGI (p = 0.41) or GP (p = 0.99).The present meta-analysis provides evidence that SDS intake is positively correlated with EGI and GP levels. The quantitative relationship of the reduction in the postprandial glycemic response and SDS consumption was used to quantify the slow digestion property on an extended time scale, and supplement the in vitro concept of SDS.