Hyperthermia in bone generated with MR imaging-controlled focused ultrasound: control strategies and drug delivery

Enabling Chemo-Immunotherapy with HIFU in Canine Cancer Patients

High intensity focused ultrasound (HIFU) is a promising non-invasive technique for treating solid tumors using thermal and histotripsy-based mechanical ablation. However, its clinical significance in different tumor types is not fully understood. To assess its therapeutic efficacy and immunomodulatory properties, we compared HIFU thermal ablation and histotripsy ablation in dogs with spontaneous tumors. We also evaluated the ability of non-ablative HIFU-based mild hyperthermia (40-45 ºC) to improve Doxorubicin delivery and immunomodulation. Our results showed that HIFU thermal ablation induced tumor remission in the majority of treated patients over 60 days, while histotripsy achieved partial response to stable disease persistence. The adverse effects of thermal ablation were minor to moderate, while histotripsy exposures were relatively well-tolerated. Furthermore, we observed a correlation between HIFU-therapeutic response and serum anti-tumor cytokine profiles and the presence of functionally active cytotoxic immune cells in patients. Similarly, Doxorubicin-treated patients showed improved drug delivery, efficacy, and anti-tumor immune responses with HIFU hyperthermia. In conclusion, our study demonstrates that depending on the tumor type and treatment parameters, HIFU treatments can enable tumor growth control, immune activation, and chemotherapy in veterinary patient. These findings have significant clinical implications and highlight the potential of HIFU as a promising cancer treatment approach.

Combination of chemotherapy and focused ultrasound for the treatment of unresectable pancreatic cancer: a proof-of-concept study

OBJECTIVES

To investigate the safety and preliminary efficacy of the combined treatment of focused ultrasound (FUS) and chemotherapy (nab-paclitaxel plus gemcitabine, nPac/Gem) for patients with unresectable pancreatic cancer.

METHODS

Patients pathologically diagnosed with unresectable pancreatic cancer were included. Low (Isppa = 1.5 kW/cm²), intermediate (2.0 kW/cm²), and high (2.5 kW/cm²) FUS intensity treatment groups were predefined. A 1% duty cycle and the 3+3 scheme were used. Six combined treatments were performed, and adverse events were assessed. Changes in tumor size and tumor response, CA 19-9 level, and patient-reported outcomes at the immediate follow-up (F/U) and/or at the 3-month F/U and survival were evaluated.

RESULTS

Three participants were enrolled in each intensity group. No adverse device effect or dose-limiting toxicity occurred in any of the participants. Seven of the nine participants experienced a >15% tumor size decrease at the immediate F/U CT and at the 3-month F/U CT. The CA 19-9 level decreased in all of the participants at the immediate F/U. All participants in the intermediate-intensity treatment group showed a > 30% tumor size decrease, partial response, and a significant decrease in the CA 19-9 level at 3-month F/U and longer survival (p < 0.05).

CONCLUSION

FUS with an intensity of 1.5 to 2.5 kW/cm² was safe in the combined treatment of FUS and nPac/Gem. Considering the results of the change in tumor size, the change in CA 19-9 level, tumor response, and survival, these FUS parameters can be used for subsequent clinical trials.

KEY POINTS

• No adverse device effect or dose-limiting toxicity occurred in any of the participants when focused ultrasound with an intensity of 1.5-2.5 kW/cm² and a low duty cycle of 1% was combined with chemotherapy. • The intermediate-intensity group showed a >30% tumor size decrease, partial response, and a significant decrease in CA 19-9 in all of the participants at the 3-month follow-up and the longest survival. • Any focused ultrasound setting used in this study could be safe and optimal for subsequent clinical trials.

Research progress of bone-targeted drug delivery system on metastatic bone tumors

Bone metastases are common in malignant tumors and the effect of conventional treatment is limited. How to effectively inhibit tumor bone metastasis and deliver the drug to the bone has become an urgent issue to be solved. While bone targeting drug delivery systems have obvious advantages in the treatment of bone tumors. The research on bone-targeted anti-tumor therapy has made significant progress in recent years. We introduced the related tumor pathways of bone metastases. The tumor microenvironment plays an important role in metastatic bone tumors. We introduce a drug-loading systems based on different environment-responsive nanocomposites for anti-tumor and anti-metastatic research. According to the process of bone metastases and the structure of bone tissue, we summarized the information on bone-targeting molecules. Bisphosphate has become the first choice of bone-targeted drug delivery carrier because of its affinity with hydroxyapatite in bone. Therefore, we sought to summarize the bone-targeting molecule of bisphosphate to identify the modification effect on bone-targeting. And this paper discusses the relationship between bisphosphate bone targeting molecular structure and drug delivery carriers, to provide some new ideas for the research and development of bone-targeting drug delivery carriers. Targeted therapy will make a more outstanding contribution to the treatment of tumors.

The effect of injected dose on localized tumor accumulation and cardiac uptake of doxorubicin in a Vx2 rabbit tumor model using MR-HIFU mild hyperthermia and thermosensitive liposomes

PURPOSE

When doxorubicin (DOX) is administered via lyso-thermosensitive liposomes (LTLD), mild hyperthermia enhances localized delivery to heated vs. unheated tumors. The optimal LTLD dose and the impact of different doses on systemic drug distribution are unknown.

Materials and methods: In this study, we evaluated local and systemic DOX delivery with three LTLD doses (0.1, 0.5, and 2.5 mg/kg) in a Vx2 rabbit tumor model. Temporally and spatially accurate controlled hyperthermia was achieved using a clinical MR-HIFU system for the intended heating duration (40 min).

Results: DOX concentration in tissues delivered from LTLD combined with MR-HIFU mild hyperthermia are dose-dependent, including heated/unheated tumor, heart, and other healthy organs. Higher DOX accumulation and tumor-to-heart drug concentration ratio, defined as the ratio of DOX delivered into the tumor vs the heart, were observed in heated tumors compared to unheated tumors in all three tested doses. The DOX uptake efficiency for each mg/kg of LTLD injected IV of heated tumor was significantly higher than that of unheated tumor and heart within the tested dose range (0.1-2.5 mg/kg). The DOX uptake for the heart linearly scaled up as a function of dose while that for the heated tumor showed some evidence of saturation at the high dose of 2.5 mg/kg.

Conclusions: These results provide guidance on clinical protocol design of hyperthermia-triggered drug delivery.

Experimental assessment of microwave ablation computational modeling with MR thermometry

PURPOSE

Computational models are widely used during the design and characterization of microwave ablation (MWA) devices, and have been proposed for pretreatment planning. Our objective was to assess three-dimensional (3D) transient temperature and ablation profiles predicted by MWA computational models with temperature profiles measured experimentally using magnetic resonance (MR) thermometry in ex vivo bovine liver.

MATERIALS AND METHODS

We performed MWA in ex vivo tissue under MR guidance using a custom, 2.45 GHz water-cooled applicator. MR thermometry data were acquired for 2 min prior to heating, during 5-10 min microwave exposures, and for 3 min following heating. Fiber-optic temperature sensors were used to validate the accuracy of MR temperature measurements. A total of 13 ablation experiments were conducted using 30-50 W applied power at the applicator input. MWA computational models were implemented using the finite element method, and incorporated temperature-dependent changes in tissue physical properties. Model-predicted ablation zone extents were compared against MRI-derived Arrhenius thermal damage maps using the Dice similarity coefficient (DSC).

RESULTS

Prior to heating, the observed standard deviation of MR temperature data was in the range of 0.3-0.7°C. Mean absolute error between MR temperature measurements and fiber-optic temperature probes during heating was in the range of 0.5-2.8°C. The mean DSC between model-predicted ablation zones and MRI-derived Arrhenius thermal damage maps for 13 experimental set-ups was 0.95. When comparing simulated and experimentally (i.e. using MRI) measured temperatures, the mean absolute error (MAE %) relative to maximum temperature change was in the range 5%-8.5%.

CONCLUSION

We developed a system for characterizing 3D transient temperature and ablation profiles with MR thermometry during MWA in ex vivo liver tissue, and applied the system for experimental validation of MWA computational models.

Simulation-based design and characterization of a microwave applicator for MR-guided hyperthermia experimental studies in small animals

Purpose

The objective of this study was to design and characterize a 2.45 GHz microwave hyperthermia applicator for delivering hyperthermia in experimental small animals to 2 - 4 mm diameter targets located 1 - 3 mm from the skin surface, with minimal heating of the surrounding tissue, under 14.1 T MRI real-time monitoring and feedback control.

Materials and methods

An experimentally validated 3D computational model was employed to design and characterize a non-invasive directional water-cooled microwave hyperthermia applicator. We assessed the effects of: reflector geometry, monopole shape, cooling water temperature, and flow rate on spatial-temperature profiles. The system was integrated with real-time MR thermometry and feedback control to monitor and maintain temperature elevations in the range of 4 - 5 °C at 1 - 3 mm from the applicator surface. The quality of heating was quantified by determining the fraction of the target volume heated to the desired temperature, and the extent of heating in non-targeted regions.

Results

Model-predicted hyperthermic profiles were in good agreement with experimental measurements (Dice Similarity Coefficient of 0.95 - 0.99). Among the four considered criteria, a reflector aperture angle of 120 °, S-shaped monopole antenna with 0.6 mm displacement, and coolant flow rate of 150 ml/min were selected as the end result of the applicator design. The temperature of circulating water and input power were identified as free variables, allowing considerable flexibility in heating target sizes within varying distances from the applicator surface. 2 - 4 mm diameter targets positioned 1 - 3 mm from the applicator surface were heated to hyperthermic temperatures, with target coverage ratio ranging between 76 - 93 % and 11 - 26 % of non-targeted tissue heated.

Conclusion

We have designed an experimental platform for MR-guided hyperthermia, incorporating a microwave applicator integrated with temperature-based feedback control to heat deep-seated targets for experimental studies in small animals.

Mild hyperthermia by MR-guided focused ultrasound in an ex vivo model of osteolytic bone tumour: optimization of the spatio-temporal control of the delivered temperature

BACKGROUND

Magnetic resonance guided focused ultrasound was suggested for the induction of deep localized hyperthermia adjuvant to radiation- or chemotherapy. In this study we are aiming to validate an experimental model for the induction of uniform temperature elevation in osteolytic bone tumours, using the natural acoustic window provided by the cortical breakthrough.

MATERIALS AND METHODS

Experiments were conducted on ex vivo lamb shank by mimicking osteolytic bone tumours. The cortical breakthrough was exploited to induce hyperthermia inside the medullar cavity by delivering acoustic energy from a phased array HIFU transducer. MR thermometry data was acquired intra-operatory using the proton resonance frequency shift (PRFS) method. Active temperature control was achieved via a closed-loop predictive controller set at 6 °C above the baseline. Several beam geometries with respect to the cortical breakthrough were investigated. Numerical simulations were used to further explain the observed phenomena. Thermal safety of bone heating was assessed by cross-correlating MR thermometry data with the measurements from a fluoroptic temperature sensor inserted in the cortical bone.

RESULTS

Numerical simulations and MR thermometry confirmed the feasibility of spatio-temporal uniform hyperthermia (± 0.5 °C) inside the medullar cavity using a fixed focal point sonication. This result was obtained by the combination of several factors: an optimal positioning of the focal spot in the plane of the cortical breakthrough, the direct absorption of the HIFU beam at the focal spot, the "acoustic oven effect" yielded by the beam interaction with the bone, and a predictive temperature controller. The fluoroptical sensor data revealed no heating risks for the bone and adjacent tissues and were in good agreement with the PRFS thermometry from measurable voxels adjacent to the periosteum.

CONCLUSION

To our knowledge, this is the first study demonstrating the feasibility of MR-guided focused ultrasound hyperthermia inside the medullar cavity of bones affected by osteolytic tumours. Our results are considered a promising step for combining adjuvant mild hyperthermia to external beam radiation therapy for sustained pain relief in patients with symptomatic bone metastases.

Microbubble-assisted MRI-guided focused ultrasound for hyperthermia at reduced power levels

PURPOSE

Ultrasound contrast agent microbubbles were combined with magnetic resonance imaging (MRI)-guided focused ultrasound (MRgFUS) as a means to achieve mild hyperthermia at reduced power levels.

METHODS

MRgFUS hyperthermia (42°C for 20 min) was evaluated in rabbit thigh muscle or Vx2 tumors using infusions of microbubbles (Definity, 20 µL/kg) or saline (sham) administered over 5 min. The impact of treatments on drug uptake was assessed with liposomal doxorubicin (Caelyx, 2.5 mg/kg). Applied power levels before and after the injection of microbubbles or saline were compared, and drug uptake was evaluated with fluorometry of tissues harvested 24 hr post-treatment.

RESULTS

MRgFUS hyperthermia in muscle and tumors resulted in accurate temperature control (mean =42.0°C, root mean square error (RMSE) = 0.3°C). The power dropped significantly following the injection of microbubbles in muscle and tumors compared to exposures without microbubbles (-21.9% ± 12.5% vs -5.9% ± 7.8%, p = .009 in muscle; -33.8% ± 9.9% vs -3.0% ± 7.2%, p < .001 in tumors). Cavitation monitoring indicated emission of subharmonic, ultraharmonic, and elevated levels of fourth to sixth harmonic frequencies following microbubble injection. The drug delivery was elevated significantly in muscle with the use of microbubble-assisted relative to conventional heating (0.5 ± 0.5 ng/mg vs 0.20 ± 0.04 ng/mg, p = .05), whereas in tumors similar levels were found (11 ± 3 ng/mg vs 16 ± 4 ng/mg, p = .13).

CONCLUSIONS

The finding that microbubbles reduce the applied power requirements for hyperthermia has considerable clinical implications. The elevated levels of drug found in muscle but not tumor tissue suggest a complex interplay between the heating effects of microbubbles with those of enhanced permeabilization and possible vascular damage.

Drug Release from Phase-Changeable Nanodroplets Triggered by Low-Intensity Focused Ultrasound

Background: As one of the most effective triggers with high tissue-penetrating capability and non-invasive feature, ultrasound shows great potential for controlling the drug release and enhancing the chemotherapeutic efficacy. In this study, we report, for the first time, construction of a phase-changeable drug-delivery nanosystem with programmable low-intensity focused ultrasound (LIFU) that could trigger drug-release and significantly enhance anticancer drug delivery. Methods: Liquid-gas phase-changeable perfluorocarbon (perfluoropentane) and an anticancer drug (doxorubicin) were simultaneously encapsulated in two kinds of nanodroplets. By triggering LIFU, the nanodroplets could be converted into microbubbles locally in tumor tissues for acoustic imaging and the loaded anticancer drug (doxorubicin) was released after the microbubble collapse. Based on the acoustic property of shell materials, such as shell stiffness, two types of nanodroplets (lipid-based nanodroplets and PLGA-based nanodroplets) were activated by different acoustic pressure levels. Ultrasound irradiation duration and power of LIFU were tested and selected to monitor and control the drug release from nanodroplets. Various ultrasound energies were introduced to induce the phase transition and microbubble collapse of nanodroplets in vitro (3 W/3 min for lipid nanodroplets; 8 W/3 min for PLGA nanodroplets). Results: We detected three steps in the drug-releasing profiles exhibiting the programmable patterns. Importantly, the intratumoral accumulation and distribution of the drug with LIFU exposure were significantly enhanced, and tumor proliferation was substantially inhibited. Co-delivery of two drug-loaded nanodroplets could overcome the physical barriers of tumor tissues during chemotherapy. Conclusion: Our study provides a new strategy for the efficient ultrasound-triggered chemotherapy by nanocarriers with programmable LIFU capable of achieving the on-demand drug release.

Clinical trial protocol for TARDOX: a phase I study to investigate the feasibility of targeted release of lyso-thermosensitive liposomal doxorubicin (ThermoDox®) using focused ultrasound in patients with liver tumours

BACKGROUND

TARDOX is a Phase I single center study of ultrasound triggered targeted drug delivery in adult oncology patients with incurable liver tumours. This proof of concept study is designed to demonstrate the safety and feasibility of targeted drug release and enhanced delivery of doxorubicin from thermally sensitive liposomes (ThermoDox®) triggered by mild hyperthermia induced by focused ultrasound in liver tumours. A key feature of the study is the direct quantification of the doxorubicin concentration before and after ultrasound exposure from tumour biopsies, using high performance liquid chromatography (HPLC).

METHODS/DESIGN

The study is conducted in two parts: Part 1 includes minimally-invasive thermometry via a thermistor or thermocouple implanted through the biopsy co-axial needle core, to confirm ultrasound-mediated hyperthermia, whilst Part 2 is carried out without invasive thermometry, to more closely mimic the ultimately intended clinical implementation of the technique. Whilst under a general anaesthetic, adult patients with incurable confirmed hepatic primary or secondary (metastatic) tumours receive a single cycle of ThermoDox®, immediately followed by ultrasound-mediated hyperthermia in a single target liver tumour. For each patient in Part 1, the HPLC-derived total doxorubicin concentration in the ultrasound-treated tumour is directly compared to the concentration before ultrasound exposure in that same tumour. For each patient in Part 2, as the tumour biopsy taken before ultrasound exposure is not available, the mean of those Part 1 tumour concentrations is used as the comparator. Success of the study requires at least a two-fold increase in the total intratumoural doxorubicin concentration, or final concentrations over 10 μg/g, in at least 50% of all patients receiving the drug, where tissue samples are evaluable by HPLC. Secondary outcome measures evaluate safety and feasibility of the intervention. Radiological response in the target tumour and control liver tumours are analysed as a tertiary outcome measure, in addition to plasma pharmacokinetics, fluorescence microscopy and immunohistochemistry of the biopsy samples.

DISCUSSION

If this early phase study can demonstrate that ultrasound-mediated hyperthermia can effectively enhance the delivery and penetration of chemotherapy agents intratumorally, it could enable application of the technique to enhance therapeutic outcomes across a broad range of drug classes to treat solid tumours.

TRIAL REGISTRATION

ClinicalTrials.gov Identifier: NCT02181075, Edura-CT Identifier: 2014-000514-61.Ethics Number: 14/NE/0124.

Drug Delivery Strategies for Platinum-Based Chemotherapy

Few chemotherapeutics have had such an impact on cancer management as cis-diamminedichloridoplatinum(II) (CDDP), also known as cisplatin. The first member of the platinum-based drug family, CDDP's potent toxicity in disrupting DNA replication has led to its widespread use in multidrug therapies, with particular benefit in patients with testicular cancers. However, CDDP also produces significant side effects that limit the maximum systemic dose. Various strategies have been developed to address this challenge including encapsulation within micro- or nanocarriers and the use of external stimuli such as ultrasound to promote uptake and release. The aim of this review is to look at these strategies and recent scientific and clinical developments.

Hyperthermia-triggered drug delivery from iRGD-modified temperature-sensitive liposomes enhances the anti-tumor efficacy using high intensity focused ultrasound

An important limitation to successful cancer treatment with chemotherapeutics is the inability to achieve therapeutically effective drug concentrations while avoiding healthy tissue damage. In this work, a new tumor-targeting peptide iRGD (CCRGDKGPDC) was used to modify drug-loaded low temperature-sensitive liposomes (iRGD-LTSL-DOX) to explore the anti-tumor effects in combination with high intensity focused ultrasound (HIFU) in vitro and in vivo. iRGD-LTSL-DOX can specifically target to ανβ3-positive cells and locally release the encapsulated doxorubicin (DOX) in a hyperthermia-triggered manner. In vivo results showed that DOX from iRGD-LTSL-DOX was intravascularly released and rapidly penetrated into tumor interstitial space after HIFU-triggered heat treatment, thereby overcoming the limited tumor penetration of anticancer drugs. Significantly stronger anti-tumor efficacy further supported the effective combination of iRGD-LTSL-DOX with HIFU-induced hyperthermia. Our study provided a novel tumor-targeting LTSL-DOX and demonstrated its usefulness in HIFU-induced hyperthermia-triggered drug delivery.

Emerging Multifunctional NIR Photothermal Therapy Systems Based on Polypyrrole Nanoparticles

Near-infrared (NIR)-light-triggered therapy platforms are now considered as a new and exciting possibility for clinical nanomedicine applications. As a promising photothermal agent, polypyrrole (PPy) nanoparticles have been extensively studied for the hyperthermia in cancer therapy due to their strong NIR light photothermal effect and excellent biocompatibility. However, the photothermal application of PPy based nanomaterials is still in its preliminary stage. Developing PPy based multifunctional nanomaterials for cancer treatment in vivo should be the future trend and object for cancer therapy. In this review, the synthesis of PPy nanoparticles and their NIR photothermal conversion performance were first discussed, followed by a summary of the recent progress in the design and implementation on the mulitifunctionalization of PPy or PPy based therapeutic platforms, as well as the introduction of their exciting biomedical applications based on the synergy between the photothermal conversion effect and other stimulative responsibilities.

Lipid-Based Drug Delivery Systems in Cancer Therapy: What Is Available and What Is Yet to Come

Cancer is a leading cause of death in many countries around the world. However, the efficacy of current standard treatments for a variety of cancers is suboptimal. First, most cancer treatments lack specificity, meaning that these treatments affect both cancer cells and their normal counterparts. Second, many anticancer agents are highly toxic, and thus, limit their use in treatment. Third, a number of cytotoxic chemotherapeutics are highly hydrophobic, which limits their utility in cancer therapy. Finally, many chemotherapeutic agents exhibit short half-lives that curtail their efficacy. As a result of these deficiencies, many current treatments lead to side effects, noncompliance, and patient inconvenience due to difficulties in administration. However, the application of nanotechnology has led to the development of effective nanosized drug delivery systems known commonly as nanoparticles. Among these delivery systems, lipid-based nanoparticles, particularly liposomes, have shown to be quite effective at exhibiting the ability to: 1) improve the selectivity of cancer chemotherapeutic agents; 2) lower the cytotoxicity of anticancer drugs to normal tissues, and thus, reduce their toxic side effects; 3) increase the solubility of hydrophobic drugs; and 4) offer a prolonged and controlled release of agents. This review will discuss the current state of lipid-based nanoparticle research, including the development of liposomes for cancer therapy, different strategies for tumor targeting, liposomal formulation of various anticancer drugs that are commercially available, recent progress in liposome technology for the treatment of cancer, and the next generation of lipid-based nanoparticles.

Targeted antibiotic delivery using low temperature-sensitive liposomes and magnetic resonance-guided high-intensity focused ultrasound hyperthermia

Chronic non-healing wound infections require long duration antibiotic therapy, and are associated with significant morbidity and health-care costs. Novel approaches for efficient, readily-translatable targeted and localised antimicrobial delivery are needed. The objectives of this study were to 1) develop low temperature-sensitive liposomes (LTSLs) containing an antimicrobial agent (ciprofloxacin) for induced release at mild hyperthermia (∼42 °C), 2) characterise in vitro ciprofloxacin release, and efficacy against Staphylococcus aureus plankton and biofilms, and 3) determine the feasibility of localised ciprofloxacin delivery in combination with MR-HIFU hyperthermia in a rat model. LTSLs were loaded actively with ciprofloxacin and their efficacy was determined using a disc diffusion method, MBEC biofilm device, and scanning electron microscopy (SEM). Ciprofloxacin release from LTSLs was assessed in a physiological buffer by fluorescence spectroscopy, and in vivo in a rat model using MR-HIFU. Results indicated that < 5% ciprofloxacin was released from the LTSL at body temperature (37 °C), while >95% was released at 42 °C. Precise hyperthermia exposures in the thigh of rats using MR-HIFU during intravenous (i.v.) administration of the LTSLs resulted in a four fold greater local concentration of ciprofloxacin compared to controls (free ciprofloxacin + MR-HIFU or LTSL alone). The biodistribution of ciprofloxacin in unheated tissues was fairly similar between treatment groups. Triggered release at 42 °C from LTSL achieved significantly greater S. aureus killing and induced membrane deformation and changes in biofilm matrix compared to free ciprofloxacin or LTSL at 37 °C. This technique has potential as a method to deliver high concentration antimicrobials to chronic wounds.

MRI Monitoring of Tumor-Selective Anticancer Drug Delivery with Stable Thermosensitive Liposomes Triggered by High-Intensity Focused Ultrasound

Monitoring of drug release from a heat-activated liposome carrier provides an opportunity for real-time control of drug delivery and allows prediction of the therapeutic effect. We have developed short-chain elastin-like polypeptide-incorporating thermosensitive liposomes (STLs). Here, we report the development of STL encapsulating gadobenate dimeglumine (Gd-BOPTA), a MRI contrast agent, and doxorubicin (Dox) (Gd-Dox-STL). The Dox release profile from Gd-Dox-STL was comparable to Gd-Dox-LTSL; however, the serum stability of Gd-Dox-STL was much higher than Gd-Dox-LTSL. MRI studies showed that the difference in T1 relaxation time between 37 and 42 °C for Gd-Dox-STL was larger than the difference for Gd-Dox-LTSL. Although relaxivity for both liposomes at 42 °C was similar, the relaxivity of Gd-Dox-STL at 37 °C was 2.5-fold lower than that of Gd-Dox-LTSL. This was likely due to Gd-BOPTA leakage from the LTSL because of low stability at 37 °C. Pharmacokinetic studies showed plasma half-lives of 4.85 and 1.95 h for Gd-Dox-STL and Gd-Dox-LTSL, respectively, consistent with in vitro stability data. In vivo MRI experiments demonstrated corelease of Dox and Gd-BOPTA from STL under mild hyperthermia induced by high-intensity focused ultrasound (HIFU), which suggests STL is a promising tumor selective formulation when coupled with MR-guided HIFU.

DCE-MRI and IVIM-MRI of rabbit Vx2 tumors treated with MR-HIFU-induced mild hyperthermia

Background

The purpose of this study is to investigate whether changes could be detected in dynamic contrast-enhanced (DCE) and intra-voxel incoherent motion (IVIM) MR parameters upon MR-guided high-intensity focused ultrasound (MR-HIFU)-induced hyperthermia in a rabbit Vx2 tumor model.

Methods

Five Vx2 tumor-bearing New Zealand white rabbits were treated with hyperthermia using a clinical MR-HIFU system. Data were acquired before and after hyperthermia. For the DCE analysis, the extended Tofts model was used. For the IVIM analysis, a Bayesian approach was used. Maps were reconstructed of the DCE parameters (K^trans, k_ep, and v_p) and IVIM parameters (D_t, f_p, and D_p). Individual parameter histograms and two-dimensional cross-correlation histograms were constructed to analyze changes in the parameters after hyperthermia. Changes in median values were tested for statistical significance with the Mann-Whitney U test.

Results

The MR temperature measurements confirmed that mild hyperthermia (40 to 42 °C) was successfully achieved in all rabbits. One rabbit died during treatment and was excluded from the analysis. In the remaining four rabbits, an increase in D_t was observed. In three rabbits, an increase in K^trans was observed, while in the other rabbits, all three DCE parameter values decreased. Mixed changes were seen for v_p and f_p.

Conclusions

Changes in DCE and IVIM parameters were detected after hyperthermia and were variable between the rabbits. DCE- and IVIM-MRI may be promising tools to assess tumor responses to hyperthermia. Further research in a larger number of subjects is necessary in order to assess their value for treatment response monitoring.

MRI-guided focused ultrasound surgery in musculoskeletal diseases: the hot topics

MRI-guided focused ultrasound surgery (MRgFUS) is a minimally invasive treatment guided by the most sophisticated imaging tool available in today's clinical practice. Both the imaging and therapeutic sides of the equipment are based on non-ionizing energy. This technique is a very promising option as potential treatment for several pathologies, including musculoskeletal (MSK) disorders. Apart from clinical applications, MRgFUS technology is the result of long, heavy and cumulative efforts exploring the effects of ultrasound on biological tissues and function, the generation of focused ultrasound and treatment monitoring by MRI. The aim of this article is to give an updated overview on a "new" interventional technique and on its applications for MSK and allied sciences.

Localised hyperthermia in rodent models using an MRI-compatible high-intensity focused ultrasound system

PURPOSE

Localised hyperthermia in rodent studies is challenging due to the small target size. This study describes the development and characterisation of an MRI-compatible high-intensity focused ultrasound (HIFU) system to perform localised mild hyperthermia treatments in rodent models.

MATERIAL AND METHODS

The hyperthermia platform consisted of an MRI-compatible small animal HIFU system, focused transducers with sector-vortex lenses, a custom-made receive coil, and means to maintain systemic temperatures of rodents. The system was integrated into a 3T MR imager. Control software was developed to acquire images, process temperature maps, and adjust output power using a proportional-integral-derivative feedback control algorithm. Hyperthermia exposures were performed in tissue-mimicking phantoms and in a rodent model (n = 9). During heating, an ROI was assigned in the heated region for temperature control and the target temperature was 42 °C; 30 min mild hyperthermia treatment followed by a 10-min cooling procedure was performed on each animal.

RESULTS

3D-printed sector-vortex lenses were successful at creating annular focal regions which enables customisation of the heating volume. Localised mild hyperthermia performed in rats produced a mean ROI temperature of 42.1 ± 0.3 °C. The T10 and T90 percentiles were 43.2 ± 0.4 °C and 41.0 ± 0.3 °C, respectively. For a 30-min treatment, the mean time duration between 41-45 °C was 31.1 min within the ROI.

CONCLUSIONS

The MRI-compatible HIFU system was successfully adapted to perform localised mild hyperthermia treatment in rodent models. A target temperature of 42 °C was well-maintained in a rat thigh model for 30 min.

International consensus on use of focused ultrasound for painful bone metastases: Current status and future directions

Focused ultrasound surgery (FUS), in particular magnetic resonance guided FUS (MRgFUS), is an emerging non-invasive thermal treatment modality in oncology that has recently proven to be effective for the palliation of metastatic bone pain. A consensus panel of internationally recognised experts in focused ultrasound critically reviewed all available data and developed consensus statements to increase awareness, accelerate the development, acceptance and adoption of FUS as a treatment for painful bone metastases and provide guidance towards broader application in oncology. In this review, evidence-based consensus statements are provided for (1) current treatment goals, (2) current indications, (3) technical considerations, (4) future directions including research priorities, and (5) economic and logistical considerations.

Quality of MR thermometry during palliative MR-guided high-intensity focused ultrasound (MR-HIFU) treatment of bone metastases

BACKGROUND

Magnetic resonance (MR)-guided high-intensity focused ultrasound has emerged as a clinical option for palliative treatment of painful bone metastases, with MR thermometry (MRT) used for treatment monitoring. In this study, the general image quality of the MRT was assessed in terms of signal-to-noise ratio (SNR) and apparent temperature variation. Also, MRT artifacts were scored for their occurrence and hampering of the treatment monitoring.

METHODS

Analyses were performed on 224 MRT datasets retrieved from 13 treatments. The SNR was measured per voxel over time in magnitude images, in the target lesion and surrounding muscle, and was averaged per treatment. The standard deviation over time of the measured temperature per voxel in MRT images, in the muscle outside the heated region, was defined as the apparent temperature variation and was averaged per treatment. The scored MRT artifacts originated from the following sources: respiratory and non-respiratory time-varying field inhomogeneities, arterial ghosting, and patient motion by muscle contraction and by gross body movement. Distinction was made between lesion type, location, and procedural sedation and analgesic (PSA).

RESULTS

The average SNR was highest in and around osteolytic lesions (21 in lesions, 27 in surrounding muscle, n = 4) and lowest in the upper body (9 in lesions, 16 in surrounding muscle, n = 4). The average apparent temperature variation was lowest in osteolytic lesions (1.2°C, n = 4) and the highest in the upper body (1.7°C, n = 4). Respiratory time-varying field inhomogeneity MRT artifacts occurred in 85% of the datasets and hampered treatment monitoring in 81%. Non-respiratory time-varying field inhomogeneities and arterial ghosting MRT artifacts were most frequent (94% and 95%) but occurred only locally. Patient motion artifacts were highly variable and occurred less in treatments of osteolytic lesions and using propofol and esketamine as PSA.

CONCLUSIONS

In this study, the general image quality of MRT was observed to be higher in osteolytic lesions and lower in the upper body. Respiratory time-varying field inhomogeneity was the most prominent MRT artifact. Patient motion occurrence varied between treatments and seemed to be related to lesion type and type of PSA. Clinicians should be aware of these observed characteristics when interpreting MRT images.

Non-invasive measurement of the temperature rise in tissue surrounding a kidney stone subjected to ultrasonic propulsion

Transcutaneous focused ultrasound (US) is used to propel kidney stones using acoustic radiation force. It is important to estimate the level of heating generated at the stone/tissue interface for safety assessment. An in-vitro experiment is conducted to measure the temperature rise in a tissue-mimicking phantom with an embedded artificial stone and subjected to a focused beam from an imaging US array. A novel optical-imaging-based thermometry method is described using an optically clear tissue phantom. Measurements are compared to the output from a fine wire thermocouple placed on the stone surface. The optical method has good sensitivity, and it does not suffer from artificial viscous heating typically observed with invasive probes and thermocouples.

Model-based feasibility assessment and evaluation of prostate hyperthermia with a commercial MR-guided endorectal HIFU ablation array

PURPOSE

Feasibility of targeted and volumetric hyperthermia (40-45 °C) delivery to the prostate with a commercial MR-guided endorectal ultrasound phased array system, designed specifically for thermal ablation and approved for ablation trials (ExAblate 2100, Insightec Ltd.), was assessed through computer simulations and tissue-equivalent phantom experiments with the intention of fast clinical translation for targeted hyperthermia in conjunction with radiotherapy and chemotherapy.

METHODS

The simulations included a 3D finite element method based biothermal model, and acoustic field calculations for the ExAblate ERUS phased array (2.3 MHz, 2.3 × 4.0 cm(2), ∼1000 channels) using the rectangular radiator method. Array beamforming strategies were investigated to deliver protracted, continuous-wave hyperthermia to focal prostate cancer targets identified from representative patient cases. Constraints on power densities, sonication durations and switching speeds imposed by ExAblate hardware and software were incorporated in the models. Preliminary experiments included beamformed sonications in tissue mimicking phantoms under MR temperature monitoring at 3 T (GE Discovery MR750W).

RESULTS

Acoustic intensities considered during simulation were limited to ensure mild hyperthermia (Tmax < 45 °C) and fail-safe operation of the ExAblate array (spatial and time averaged acoustic intensity ISATA < 3.4 W/cm(2)). Tissue volumes with therapeutic temperature levels (T > 41 °C) were estimated. Numerical simulations indicated that T > 41 °C was calculated in 13-23 cm(3) volumes for sonications with planar or diverging beam patterns at 0.9-1.2 W/cm(2), in 4.5-5.8 cm(3) volumes for simultaneous multipoint focus beam patterns at ∼0.7 W/cm(2), and in ∼6.0 cm(3) for curvilinear (cylindrical) beam patterns at 0.75 W/cm(2). Focused heating patterns may be practical for treating focal disease in a single posterior quadrant of the prostate and diffused heating patterns may be useful for heating quadrants, hemigland volumes or even bilateral targets. Treatable volumes may be limited by pubic bone heating. Therapeutic temperatures were estimated for a range of physiological parameters, sonication duty cycles and rectal cooling. Hyperthermia specific phasing patterns were implemented on the ExAblate prostate array and continuous-wave sonications (∼0.88 W/cm(2), 15 min) were performed in tissue-mimicking material with real-time MR-based temperature imaging (PRFS imaging at 3.0 T). Shapes of heating patterns observed during experiments were consistent with simulations.

CONCLUSIONS

The ExAblate 2100, designed specifically for thermal ablation, can be controlled for delivering continuous hyperthermia in prostate while working within operational constraints.

Ultrasonically triggered drug delivery: breaking the barrier

The adverse side-effects of chemotherapy can be minimized by delivering the therapeutics in time and space to only the desired target site. Ultrasound offers one fairly non-invasive method of accomplishing such precise delivery because its energy can disrupt nanosized containers that are designed to sequester the drug until the ultrasonic event. Such containers include micelles, liposomes and solid nanoparticles. Conventional micelles and liposomes are less acoustically sensitive to ultrasound because the strongest forces associated with ultrasound are generated by gas-liquid interfaces, which both of these conventional constructs lack. Acoustically activated carriers often incorporate a gas phase, either actively as preformed bubbles, or passively such as taking advantage of dissolved gasses that form bubbles upon insonation. Newer concepts include using liquids that form gas when insonated. This review focuses on the ultrasonically activated delivery of therapeutics from micelles, liposomes and solid particles. In vitro and in vivo results are summarized and discussed. Novel structural concepts from micelles and liposomes are presented. Mechanisms of ultrasonically activated release are discussed. The future of ultrasound in drug delivery is envisioned.

Magnetic resonance guided high-intensity focused ultrasound for image-guided temperature-induced drug delivery

Magnetic resonance guided high-intensity focused ultrasound (MR-HIFU) is a versatile technology platform for noninvasive thermal therapies in oncology. Since MR-HIFU allows heating of deep-seated tissue to well-defined temperatures under MR image guidance, this novel technology has great potential for local heat-mediated drug delivery from temperature-sensitive liposomes (TSLs). In particular, MR provides the ability for image guidance of the drug delivery when an MRI contrast agent is co-encapsulated with the drug in the aqueous lumen of the liposomes. Monitoring of the tumor drug coverage offers possibilities for a personalized thermal treatment in oncology. This review focuses on MR-HIFU as a noninvasive technology platform, temperature-sensitive liposomal formulations for drug delivery and image-guided drug delivery, and the effect of HIFU-induced hyperthermia on the TSL and drug distribution. Finally, the opportunities and challenges of localized MR-HIFU-mediated drug delivery from temperature-sensitive liposomes in oncology are discussed.

Ultrasound-mediated drug delivery using liposomes modified with a thermosensitive polymer

Ultrasound-mediated drug delivery was established using liposomes that were modified with the thermosensitive polymer (TSP) poly(NIPMAM-co-NIPAM), which sensitized the liposomes to high temperatures. TSP-modified liposomes (TSP liposomes) released encapsulated calcein under 1 MHz ultrasound irradiation at 0.5 W/cm(2) for 120 s as well as the case under incubation at 42 °C for 15 min. In addition, uptake of the drug released from TSP liposomes by cancer cells was enhanced by ultrasound irradiation. In a cell injury assay using doxorubicin (DOX)-loaded TSP liposomes and ultrasound irradiation, cell viability of HepG2 cells at 6 h after ultrasound irradiation (1 MHz, 0.5 W/cm(2) for 30 s) with DOX-loaded TSP liposomes (TSP/lipid ratio=1) was 60%, which was significantly lower than that of the control conditions such as DOX-loaded TSP liposomes alone and DOX-loaded intact liposomes under ultrasound irradiation.

MRI-guided monitoring of thermal dose and targeted drug delivery for cancer therapy

Application of localized hyperthermia treatment for solid tumor therapy is under active clinical investigation. The success of this treatment methodology, whether for tumor ablation or drug delivery, requires accurate target localization and real-time temperature mapping of the targeted region. Magnetic Resonance Imaging (MRI) can monitor temperature elevations in tissues in real-time during tumor therapy. MRI can also be applied in concert with methods such as High Intensity Focused Ultrasound (HIFU) to enable image-guided drug delivery (IGDD) from temperature sensitive nanocarriers, by exploiting not only its anatomic resolution, but its ability to detect and measure drug release using markers co-loaded with drugs within the nanocarriers. We review this rapidly emerging technology, providing an overview of MRI-guided tissue thermal dose monitoring for HIFU and Laser therapy, its role in targeted drug delivery and its future potential for clinical translation.

Enhanced drug delivery in rabbit VX2 tumours using thermosensitive liposomes and MRI-controlled focused ultrasound hyperthermia

PURPOSE

The efficacy of anticancer drugs in solid tumours is impaired by their inability to reach all cancer cells in sufficient concentration to cause cytotoxicity. Hyperthermia-triggered release of drugs from thermosensitive liposomes can increase tumour drug concentration, but tumour-specific drug delivery requires precise temperature control, and effects on microregional distribution of anticancer drugs in tumours are unknown. Here we evaluate thermally triggered release of doxorubicin in a rabbit tumour model by comparing free versus thermosensitive liposomal doxorubicin administered systemically during magnetic resonance imaging (MRI)-controlled focused ultrasound hyperthermia.

MATERIALS AND METHODS

Twelve rabbits with a transplanted VX2 tumour in each thigh had a 10 mm diameter region in one tumour heated to 43°C using focused ultrasound with temperature control by MRI thermometry. Delivery of doxorubicin to tumours and normal tissues was quantified by fluorescence in tissue homogenates, and by fluorescence microscopy.

RESULTS

Using thermosensitive liposomal doxorubicin (2.5 mg/kg), doxorubicin concentrations in heated tumours were 26.7 times higher than in unheated tumours (n = 7, p = 0.017, two-sided Wilcoxon signed-rank test). There was no significant enhancement with free doxorubicin in heated versus unheated tumours (n = 3, p = 0.5). With thermosensitive liposomes (8.3 mg/kg), fluorescence microscopy demonstrated increased doxorubicin fluorescence in heated versus unheated tumours, co-localised with nuclear staining throughout the tumour.

CONCLUSIONS

Localised image-guided delivery of high concentrations of doxorubicin to cancer cells was achieved non-invasively in implanted tumours with temperature-sensitive drug carriers and a preclinical MRI-controlled focused ultrasound hyperthermia system.

Thermosensitive liposomes for localized delivery and triggered release of chemotherapy

Liposomes are a promising class of nanomedicine with the potential to provide site-specific chemotherapy, thus improving the quality of cancer patient care. First-generation liposomes have emerged as one of the first nanomedicines used clinically for localized delivery of chemotherapy. Second-generation liposomes, i.e. stimuli-responsive liposomes, have the potential to not only provide site-specific chemotherapy, but also triggered drug release and thus greater spatial and temporal control of therapy. Temperature-sensitive liposomes are an especially attractive option, as tumors can be heated in a controlled and predictable manner with external energy sources. Traditional thermosensitive liposomes are composed of lipids that undergo a gel-to-liquid phase transition at several degrees above physiological temperature. More recently, temperature-sensitization of liposomes has been demonstrated with the use of lysolipids and synthetic temperature-sensitive polymers. The design, drug release behavior, and clinical potential of various temperature-sensitive liposomes, as well as the various heating modalities used to trigger release, are discussed in this review.

Hyperthermia-induced drug targeting

INTRODUCTION

Specific delivery of a drug to a target site is a major goal of drug delivery research. Using temperature-sensitive liposomes (TSLs) is one way to achieve this; the liposome acts as a protective carrier, allowing increased drug to flow through the bloodstream by minimizing clearance and non-specific uptake. On reaching microvessels within a heated tumor, the drug is released and quickly penetrates. A major advance in the field is ThermoDox® (Celsion), demonstrating significant improvements to the drug release rates and drug uptake in heated tumors (∼ 41°C). Most recently, magnetic resonance-guided focused ultrasound (MRgFUS) has been combined with TSL drug delivery to provide localized chemotherapy with simultaneous quantification of drug release within the tumor.

AREAS COVERED

In this article the field of hyperthermia-induced drug delivery is discussed, with an emphasis on the development of TSLs and their combination with hyperthermia (both mild and ablative) in cancer therapy. State-of-the-art image-guided heating technologies used with this combination strategy will also be presented, with examples of real-time monitoring of drug delivery and prediction of efficacy.

EXPERT OPINION

The specific delivery of drugs by combining hyperthermia with TSLs is showing great promise in the clinic and its potential will be even greater as the use of image-guided focused ultrasound becomes more widespread - a technique capable of penetrating deep within the body to heat a specific area with improved control. In conjunction with this, it is anticipated that multifunctional TSLs will be a major topic of study in this field.

Hyperthermia-triggered drug delivery from temperature-sensitive liposomes using MRI-guided high intensity focused ultrasound

In the continuous search for cancer therapies with a higher therapeutic window, localized temperature-induced drug delivery may offer a minimal invasive treatment option. Here, a chemotherapeutic drug is encapsulated into a temperature-sensitive liposome (TSL) that is released at elevated temperatures, for example, when passing through a locally heated tumor. Consequently, high drug levels in the tumor tissue can be achieved, while reducing drug exposure to healthy tissue. Although the concept of temperature-triggered drug delivery was suggested more than thirty years ago, several chemical and technological challenges had to be addressed to advance this approach towards clinical translation. In particular, non-invasive focal heating of tissue in a controlled fashion remained a challenge. For the latter, high intensity focused ultrasound (HIFU) allows non-invasive heating to establish hyperthermia (40-45 °C) of tumor tissue over time. Magnetic resonance imaging (MRI) plays a pivotal role in this procedure thanks to its superb spatial resolution for soft tissue as well as the possibility to acquire 3D temperature information. Consequently, MRI systems emerged with an HIFU ultrasound transducer embedded in the patient bed (MR-HIFU), where the MRI is utilized for treatment planning, and to provide spatial and temperature feedback to the HIFU. For tumor treatment, the lesion is heated to 42 °C using HIFU. At this temperature, the drug-loaded TSLs release their payload in a quantitative fashion. The concept of temperature-triggered drug delivery has been extended to MR image-guided drug delivery by the co-encapsulation of a paramagnetic MRI contrast agent in the lumen of TSLs. This review will give an overview of recent developments in temperature-induced drug delivery using HIFU under MRI guidance.