A novel system for the reconstruction of a coronary artery lumen profile in real time: a preclinical validation

Novel venous balloon for compliance measurement and stent sizing in a post-thrombotic swine model

Objective: Real-time accurate venous lesion characterization is needed during endovenous interventions for stent deployment. The goal of this study is to validate a novel device for venoplasty sizing and compliance measurements. Methods: A compliance measuring sizing balloon (CMSB) uses real-time electrical conductance measurements based on Ohm's Law to measure the venous size and compliance in conjunction with pressure measurement. The sizing accuracy and repeatability of the CMSB system were performed with phantoms on the bench and in a swine model with an induced post thrombotic (PT) stenosis in the common femoral vein of swine. Results: The accuracy and repeatability of the CMSB system were validated with phantom bench studies of known dimensions in the range of venous diameters. In 9 swine (6 experimental and 3 control animals), the luminal cross-sectional areas (CSA) increased heterogeneously along the PT stenosis when the CMSB system was inflated by stepwise pressures. The PT stenosis showed lower compliance compared to the non-PT vein segments (5 mm2 vs. 10 mm2 and 13 mm2 at a pressure change of 40 cm H2O). Compliance had no statistical difference between venous hypertension (VHT) and Control. Compliance at PT stenosis, however, was significantly smaller than that at Control and VHT (p < 0.05, ANOVA). Conclusion: The CMSB system provides accurate, repeatable, real-time measurements of CSA and compliance for assessment of venous lesions to guide interventions. These findings provide the impetus for future first-in-human studies.

Biologically Inspired Catheter for Endovascular Sensing and Navigation

Minimally invasive treatment of vascular disease demands dynamic navigation through complex blood vessel pathways and accurate placement of an interventional device, which has resulted in increased reliance on fluoroscopic guidance and commensurate radiation exposure to the patient and staff. Here we introduce a guidance system inspired by electric fish that incorporates measurements from a newly designed electrogenic sensory catheter with preoperative imaging to provide continuous feedback to guide vascular procedures without additional contrast injection, radiation, image registration, or external tracking. Electrodes near the catheter tip simultaneously create a weak electric field and measure the impedance, which changes with the internal geometry of the vessel as the catheter advances through the vasculature. The impedance time series is then mapped to a preoperative vessel model to determine the relative position of the catheter within the vessel tree. We present navigation in a synthetic vessel tree based on our mapping technique. Experiments in a porcine model demonstrated the sensor's ability to detect cross-sectional area variation in vivo. These initial results demonstrate the capability and potential of this novel bioimpedance-based navigation technology as a non-fluoroscopic technique to augment existing imaging methods.

Electrical Conductance Device for Stent Sizing

The minimum stent area (MSA) has been clinically established as a significant predictor of restenosis, thrombosis, and ischemia using intra-vascular ultrasound (IVUS). Unfortunately, IVUS measurements are far from routine because of significant cost of IVUS, the training required, the subjectivity of image interpretation and the time added to the procedure. The objective of this study is to verify the accuracy of a conductance catheter for stent sizing. Here, we introduce an easy and entirely objective device and method for real time determination of MSA. A 10 kHz, 35 μA rms current is passed through the external electrodes of an intravascular catheter while the conductance is measured across a separate set of electrodes. Both phantom and ex vivo validations of metal stent sizing in five porcine carotid arteries were confirmed. The accuracy of the measurements were found to be excellent in phantoms (root mean square, rms, of 3.4% of actual value) and in ex-vivo vessels (rms = 3.2% of measured value). An offset of conductance occurs when a conductive metal stent (e.g., bare metal stent) is deployed in the vessel, while the slope remains the same. This offset is absent in the case of drug eluting stent where the metal is coated (i.e., insulated) or non-metal bioresorbable stent. The present device makes easy, accurate and reproducible measurements of the size of stented blood vessels within 3.2% rms error. This device provides an alternative method to sizing of stent (i.e., MSA) in real-time without subjective interpretation and with less cost than IVUS.

Injection-Less Conductance Method for Vascular Sizing

Lumen vessel sizing is important for optimization of interventional outcomes for treatment of vascular disease. The objective of this study is to develop an injection-less method to determine the lumen diameter, using multiple frequencies that eliminates the need for saline injections. We utilize the same electrical conductance devices developed for the two-injection method. A mathematical electrical model was devised to estimate the lumen area and diameter of the arteries. In vitro experiments were used to validate the method for various lumen diameters with both 5-5-5 (peripheral) and 2-2-2 (coronary) spacing conductance guidewires. The majority of 11 vessel data fall within one standard deviation and all the data fall within two standard deviations. The results indicate that the two-frequency model can reasonably predict the lumen diameter in an in-vitro test set-up. Our findings show that this approach can potentially translate to in vivo which would enable pull-back to reconstruct the lumen area profile of the vessel.

LumenRECON Guidewire: Pilot Study of a Novel, Nonimaging Technology for Accurate Vessel Sizing and Delivery of Therapy in Femoropopliteal Disease

BACKGROUND

Proper vessel sizing during endovascular interventions is crucial to avoid adverse procedural and clinical outcomes. LumenRECON (LR) is a novel, nonimaging, 0.035-inch wire-based technology that uses the physics-based principle of Ohm's law to provide a simple, real-time luminal size while also providing a platform for therapy delivery. This study evaluated the accuracy, reliability, and safety of the LR system in patients presenting for a femoropopliteal artery intervention.

METHODS AND RESULTS

This multicenter, prospective pilot study of 24 patients presenting for peripheral intervention compared LR measurements of femoropopliteal artery size to angiographic visual estimation, duplex ultrasound, quantitative angiography, and intravascular ultrasound. The primary effectiveness and safety end point was comparison against core laboratory adjudicated intravascular ultrasound values and major adverse events, respectively. Additional preclinical studies were also performed in vitro and in vivo in swine to determine the accuracy of the LR guidewire system. No intra- or postprocedure device-related adverse events occurred. A balloon or stent was successfully delivered in 12 patients (50%) over the LR wire. Differences in repeatability between successive LR measurements was 2.5±0.40% (R²=0.96) with no significant bias. Differences in measurements of LR to other modalities were 0.5±1.7%, 5.0±1.8%, -1.5±2.0%, and 6.8±3.4% for intravascular ultrasound core laboratory, quantitative angiography, angiographic, and duplex ultrasound, respectively.

CONCLUSIONS

This study demonstrates that through a physics-based principle, LR provides a real-time, safe, reproducible, and accurate vessel size of the femoropopliteal artery during intervention and can additionally serve as a conduit for therapy delivery over its wire-based platform.

Validation of the Gatortail method for accurate sizing of pulmonary vessels from 3D medical images

PURPOSE

Detailed characterization of changes in vessel size is crucial for the diagnosis and management of a variety of vascular diseases. Because clinical measurement of vessel size is typically dependent on the radiologist's subjective interpretation of the vessel borders, it is often prone to high inter- and intra-user variability. Automatic methods of vessel sizing have been developed for two-dimensional images but a fully three-dimensional (3D) method suitable for vessel sizing from volumetric X-ray computed tomography (CT) or magnetic resonance imaging has heretofore not been demonstrated and validated robustly.

METHODS

In this paper, we refined and objectively validated Gatortail, a method that creates a mathematical geometric 3D model of each branch in a vascular tree, simulates the appearance of the virtual vascular tree in a 3D CT image, and uses the similarity of the simulated image to a patient's CT scan to drive the optimization of the model parameters, including vessel size, to match that of the patient. The method was validated with a 2-dimensional virtual tree structure under deformation, and with a realistic 3D-printed vascular phantom in which the diameter of 64 branches were manually measured 3 times each. The phantom was then scanned on a conventional clinical CT imaging system and the images processed with the in-house software to automatically segment and mathematically model the vascular tree, label each branch, and perform the Gatortail optimization of branch size and trajectory. Previously proposed methods of vessel sizing using matched Gaussian filters and tubularity metrics were also tested. The Gatortail method was then demonstrated on the pulmonary arterial tree segmented from a human volunteer's CT scan.

RESULTS

The standard deviation of the difference between the manually measured and Gatortail-based radii in the 3D physical phantom was 0.074 mm (0.087 in-plane pixel units for image voxels of dimension 0.85 × 0.85 × 1.0 mm) over the 64 branches, representing vessel diameters ranging from 1.2 to 7 mm. The linear regression fit gave a slope of 1.056 and an R² value of 0.989. These three metrics reflect superior agreement of the radii estimates relative to previously published results over all sizes tested. Sizing via matched Gaussian filters resulted in size underestimates of >33% over all three test vessels, while the tubularity-metric matching exhibited a sizing uncertainty of >50%. In the human chest CT data set, the vessel voxel intensity profiles with and without branch model optimization showed excellent agreement and improvement in the objective measure of image similarity.

CONCLUSIONS

Gatortail has been demonstrated to be an automated, objective, accurate and robust method for sizing of vessels in 3D non-invasively from chest CT scans. We anticipate that Gatortail, an image-based approach to automatically compute estimates of blood vessel radii and trajectories from 3D medical images, will facilitate future quantitative evaluation of vascular response to disease and environmental insult and improve understanding of the biological mechanisms underlying vascular disease processes.

Optimization of Peripheral Vascular Sizing with Conductance Guidewire: Theory and Experiment

Although the clinical range of interventions for coronary arteries is about 2 to 5 mm, the range of diameters of peripheral vasculature is significantly larger (about 10 mm for human iliac artery). When the vessel diameter is increased, the spacing between excitation electrodes on a conductance sizing device must also increase to accommodate the greater range of vessel diameters. The increase in the excitation electrodes distance, however, causes higher parallel conductance or current losses outside of artery lumen. We have previously shown that the conductance catheter/guidewire excitation electrode distances affects the measurement accuracy for the peripheral artery lumen sizing. Here, we propose a simple solution that varies the detection electrode distances to compensate for parallel conductance losses. Computational models were constructed to simulate the conductance guidewire with various electrodes spacing combinations over a range of peripheral artery lumen diameters and surrounding tissue electrical conductivities. The results demonstrate that the measurement accuracy may be significantly improved by increased detection spacing. Specifically, an optimally configured detection/excitation spacing (i.e., 5-5-5 or an equidistant electrode interval with a detection-to-excitation spacing ratio of 0.3) was shown to accurately predict the lumen diameter (i.e., -10% < error < 10%) over a broad range of peripheral artery dimensions (4 mm < diameter < 10 mm). The computational results were substantiated with both ex-vivo and in-vivo measurements of peripheral arteries. The present results support the accuracy of the conductance technique for measurement of peripheral reference vessel diameter.

Two-in-one aortic valve sizing and valvuloplasty conductance balloon catheter

BACKGROUND

Inaccurate aortic valve sizing and selection is linked to paravalvular leakage in transcatheter aortic valve replacement (TAVR). Here, a novel sizing valvuloplasty conductance balloon (SVCB) catheter is shown to be accurate, reproducible, unbiased, and provides real-time tool for aortic valve sizing that fits within the standard valvuloplasty procedure.

METHODS AND RESULTS

The SVCB catheter is a valvuloplasty device that uses real-time electrical conductance measurements based on Ohm's Law to size the balloon opposed against the aortic valve at any given inflation pressure. Accuracy and repeatability of the SVCB catheter was performed on the bench in phantoms of known dimension and ex vivo in three domestic swine aortic annuli with comparison to computed tomography (CT) and dilator measurements. Procedural workflow and safety was demonstrated in vivo in three additional domestic swine. SVCB catheter measurements had negligible bias or error for bench accuracy considered as the gold standard (Bias: -0.11 ± 0.26 mm; Error: 1.2%), but greater disagreement in ex vivo versus dilators (Bias: -0.3 ± 1.1 mm; Error: 4.5%), and ex vivo versus CT (Bias: -1.0 ± 1.6 mm; Error: 8.7%). The dilator versus CT accuracy showed similar agreement (Bias: -0.9 ± 1.5 mm; Error: 7.3%). Repeatability was excellent on the bench (Bias: 0.02 ± 0.12 mm; Error: 0.5%) and ex vivo (Bias: -0.4 ± 0.9 mm; Error: 4.6%). In animal studies, the device fit well within the procedural workflow with no adverse events or complications.

CONCLUSIONS

Due to the clinical relevance of this accurate, repeatable, unbiased, and real-time sizing measurement, the SVCB catheter may provide a useful tool prior to TAVR. These findings merit a future human study.

A lumen sizing workhorse guidewire for peripheral vasculature: two functions in one device

OBJECTIVES

Ideally, guidewires used during peripheral vasculature (PV) interventions could serve both as a therapy delivery platform and a diagnostic tool for real-time vessel sizing (2-in-1 function).

BACKGROUND

Vascular imaging modalities, like intravascular ultrasound (IVUS), used during lower PV interventions, can improve outcomes versus angiographic assessment alone, but are rarely used due to added time, cost, and required clinical training/interpretation.

METHODS

A 0.035″ bodied 0.035″ conductance guidewire (CGW) is described here as a vascular navigation and diagnostic real-time PV sizing tool. When attached to a console, the CGW creates a safe, electric field to determine vascular size through simultaneous voltage measurements.

RESULTS

The CGW showed functionality as a workhorse guidewire on the bench (torqueability and trackability equivalent to a Wholey guidewire) and in vivo (over-the-wire stent deployment in domestic swine and first-in-man study with no major adverse events). Validation of CGW sizing versus the true diameter and IVUS was completed in 4-10 mm diameter phantoms on the bench and in swine and showed virtually no bias with excellent repeatability and accuracy (i.e., CGW repeatability: swine phantom bias = 0.03 ± 0.09 mm (1.3% error). CGW vs. true diameter: in vivo bias = 0.14 ± 0.15 mm (2.7% error). IVUS vs. true diameter: swine phantom bias = 0.01 ± 0.36 mm (4.7% error). CCW vs. IVUS: swine phantom bias = 0.13 ± 0.26 mm (3.8% error)).

CONCLUSIONS

Real-time, accurate, and safe PV dimension assessment and therapy-delivery (2-in-1 function) is possible using a novel workhorse 0.035″ bodied CGW.

Effect of saline injection mixing on accuracy of conductance lumen sizing of peripheral vessels

Transient displacement of blood in vessel lumen with saline injection is necessary in the conductance method for measurement of arterial cross-sectional area (CSA). The displacement of blood is dictated by the interactions between arterial flow hemodynamics and saline injection dynamics. The objective of the present study is to understand how the accuracy of conductance measurements is affected by the saline injection. Computational simulations were performed to assess the error in predictions of arterial CSA using conductance measurements over a range of peripheral artery diameters (i.e., 4, 7, and 10 mm) with an introducing catheter (6 Fr.) for various blood flow and saline injection rates. The simulation results were validated using the conductance measurements of the phantoms with known diameters (i.e., 7 and 10 mm). The results demonstrated that a minimum ratio of saline injection rate to blood flow rate of 3 is needed to fully displace the blood and result in accurate measurement of CSA for the peripheral artery sizes considered. Furthermore, the error was shown to be minimized as the detection electrodes are positioned between the distal to the mixing zone induced by saline injection and far downstream (4–8 cm from the injection catheter tip). The present study shows that even for the large peripheral arteries (7–10 mm) where mixing can occur, an appropriate injection rate and detection position can produce accurate measurement of lumen size.

Conductance sizing balloon for measurement of peripheral artery minimal stent area

BACKGROUND

Because stent underdeployment occurs frequently, accurate minimal stent area (MSA) measurement during postdilatation is necessary. This study investigated the accuracy and repeatability for MSA determination using a novel conductance balloon (CB) catheter for peripheral vessels.

METHODS

The CB catheter is a standard balloon catheter that measures electrical conductance (ratio of current/voltage drop) in real-time during inflation, which directly relates to the balloon cross-sectional area through Ohm's law. CB measurements were made in 4- to 10-mm phantoms on the bench, ex vivo in stents fully deployed in diseased human peripheral arteries, and in vivo in stents fully deployed in peripheral vessels in six swine. CB measurement accuracy and repeatability were calculated and compared with the known dimension (bench phantoms) or with intravascular ultrasound (IVUS) measurement after stent deployment (ex vivo and in vivo).

RESULTS

CB measurements were highly accurate (error: 1.8% bench, 5% ex vivo, and 5% in vivo) and repeatable (error: 0.9% bench, 1.8% ex vivo, and 1.3% in vivo), with virtually no bias (average difference in measurements: -0.05 mm bench CB vs known phantom diameters, -0.06 mm ex vivo CB vs IVUS, and -0.11 mm in vivo CB vs IVUS).

CONCLUSIONS

The CB sizing capability can be integrated within a standard balloon catheter (two-in-one function) to provide accurate, real-time assessment of MSA to ensure full stent apposition rather than the use of pressure as a surrogate for size.

Accurate nonfluoroscopic guidance and tip location of peripherally inserted central catheters using a conductance guidewire system

BACKGROUND

Bedside placement of peripherally inserted central catheters (PICCs) may result in navigation to undesirable locations, such as the contralateral innominate or jugular vein, instead of the superior vena cava or right atrium. Although some guidance and tip location tools exist, they have inherent limitations because of reliance on physiological measures (eg, chest landmarks, electrocardiogram, etc), instead of anatomical assessment (ie, geometric changes in the vasculature). In this study, an accurate, anatomically based, non-X-ray guidance tool placed on a novel 0.035" conductance guidewire (CGW) is validated for PICC navigation and tip location.

METHODS

The CGW system uses electrical conductance recordings to assess changes in vessel cross-sectional area to guide navigation of the PICC tip. Conductance rises and oscillates when going in the correct direction to the superior vena cava/right atrium, but drops when going in the incorrect direction away from the heart. Bench and in vivo studies in six swine were used to confirm the accuracy and repeatability of the PICC placement at various anatomical locations. The PICC tip location was confirmed by direct visualization vs the desired location.

RESULTS

CGW PICC guidance was highly accurate and repeatable with virtually no difference between actual and desired catheter tip location. The difference between the CGW PICC location vs the desired target was -0.07 ± 0.07 cm (6.6% error) on the bench and 0.04 ± 0.10 cm (5% error) in vivo. No complications or adverse events occurred during CGW usage.

CONCLUSIONS

The CGW provides an anatomically based, reproducible, and clinically significant method for PICC navigation and tip location that can improve accuracy, decrease the wait time prior to therapy delivery, decrease cost, and minimize the need for X-ray. These findings warrant clinical evaluation of this navigation tool for PICC line placement.

Impact of surrounding tissue on conductance measurement of coronary and peripheral lumen area

Parallel conductance (electric current flow through surrounding tissue) is an important determinant of accurate measurements of arterial lumen diameter, using the conductance method. The present study is focused on the role of non-uniform geometrical/electrical configurations of surrounding tissue, which are a primary source of electric current leakage. Computational models were constructed to simulate the conductance catheter measurement with two different excitation electrodes spacings (i.e. 12 and 20 mm for coronary and peripheral sizing, respectively) for different vessel-tissue configurations: (i) blood vessel fully embedded in muscle tissue, (ii) blood vessel superficially embedded in muscle tissue, and (iii) blood vessel superficially embedded in muscle tissue with fat covering half of the arterial vessel (anterior portion). The simulations suggest that the parallel conductance and accuracy of measurement is dependent on the inhomogeneous/anisotropic configuration of surrounding tissue, including the asymmetric dimension and anisotropy in electrical conductivity of surrounding tissue. Specifically, the measurement was shown to be accurate as long as the vessel was superficial, regardless of the considerable total surrounding tissue dimension for coronary or peripheral arteries. Moreover, it was shown that the unfavourable impact of parallel conductance on the accuracy of conductance catheter measurement is decreased by the combination of a lower transverse electrical conductivity of surrounding muscle tissue, a smaller electrode spacing and a larger lumen diameter. The present findings confirm that the conductance catheter technique provides an accurate platform for sizing of clinically relevant (i.e. superficial and diseased) arteries.

Dynamic micro- and macrovascular remodeling in coronary circulation of obese Ossabaw pigs with metabolic syndrome

Previous studies from our laboratory showed that coronary arterioles from type 2 diabetic mice undergo inward hypertrophic remodeling and reduced stiffness. The aim of the current study was to determine if coronary resistance microvessels (CRMs) in Ossabaw swine with metabolic syndrome (MetS) undergo remodeling distinct from coronary conduit arteries. Male Ossabaw swine were fed normal (n = 7, Lean) or hypercaloric high-fat (n = 7, MetS) diets for 6 mo, and then CRMs were isolated and mounted on a pressure myograph. CRMs isolated from MetS swine exhibited decreased luminal diameters (126 ± 5 and 105 ± 9 μm in Lean and MetS, respectively, P < 0.05) with thicker walls (18 ± 3 and 31 ± 3 μm in Lean and MetS, respectively, P < 0.05), which doubled the wall-to-lumen ratio (14 ± 2 and 30 ± 2 in Lean and MetS, respectively, P < 0.01). Incremental modulus of elasticity (IME) and beta stiffness index (BSI) were reduced in CRMs isolated from MetS pigs (IME: 3.6 × 10(6) ± 0.7 × 10(6) and 1.1 × 10(6) ± 0.2 × 10(6) dyn/cm(2) in Lean and MetS, respectively, P < 0.001; BSI: 10.3 ± 0.4 and 7.3 ± 1.8 in Lean and MetS, respectively, P < 0.001). BSI in the left anterior descending coronary artery was augmented in pigs with MetS. Structural changes were associated with capillary rarefaction, decreased hyperemic-to-basal coronary flow velocity ratio, and augmented myogenic tone. MetS CRMs showed a reduced collagen-to-elastin ratio, while immunostaining for the receptor for advanced glycation end products was selectively increased in the left anterior descending coronary artery. These data suggest that MetS causes hypertrophic inward remodeling of CRMs and capillary rarefaction, which contribute to decreased coronary flow and myocardial ischemia. Moreover, our data demonstrate novel differential remodeling between coronary micro- and macrovessels in a clinically relevant model of MetS.

Which diameter and angle rule provides optimal flow patterns in a coronary bifurcation?

The branching angle and diameter ratio in epicardial coronary artery bifurcations are two important determinants of atherogenesis. Murray's cubed diameter law and bifurcation angle have been assumed to yield optimal flows through a bifurcation. In contrast, we have recently shown a 7/3 diameter law (HK diameter model), based on minimum energy hypothesis in an entire tree structure. Here, we derive a bifurcation angle rule corresponding to the HK diameter model and critically evaluate the streamline flow through HK and Murray-type bifurcations. The bifurcations from coronary casts were found to obey the HK diameter model and angle rule much more than Murray's model. A finite element model was used to investigate flow patterns for coronary artery bifurcations of various types. The inlet velocity and pressure boundary conditions were measured by ComboWire. Y-bifurcation of Murray type decreased wall shear stress-WSS (10%-40%) and created an increased oscillatory shear index-OSI in atherosclerosis-prone regions as compared with HK-type bifurcations. The HK-type bifurcations were found to have more optimal flow patterns (i.e., higher WSS and lower OSI) than Murray-type bifurcations which have been traditionally believed to be optimized. This study has implications for changes in bifurcation angles and diameters in percutaneous coronary intervention.

A validated predictive model of coronary fractional flow reserve

Myocardial fractional flow reserve (FFR), an important index of coronary stenosis, is measured by a pressure sensor guidewire. The determination of FFR, only based on the dimensions (lumen diameters and length) of stenosis and hyperaemic coronary flow with no other ad hoc parameters, is currently not possible. We propose an analytical model derived from conservation of energy, which considers various energy losses along the length of a stenosis, i.e. convective and diffusive energy losses as well as energy loss due to sudden constriction and expansion in lumen area. In vitro (constrictions were created in isolated arteries using symmetric and asymmetric tubes as well as an inflatable occluder cuff) and in vivo (constrictions were induced in coronary arteries of eight swine by an occluder cuff) experiments were used to validate the proposed analytical model. The proposed model agreed well with the experimental measurements. A least-squares fit showed a linear relation as (Δp or FFR)(experiment) = a(Δp or FFR)(theory) + b, where a and b were 1.08 and -1.15 mmHg (r(2) = 0.99) for in vitro Δp, 0.96 and 1.79 mmHg (r(2) = 0.75) for in vivo Δp, and 0.85 and 0.1 (r(2) = 0.7) for FFR. Flow pulsatility and stenosis shape (e.g. eccentricity, exit angle divergence, etc.) had a negligible effect on myocardial FFR, while the entrance effect in a coronary stenosis was found to contribute significantly to the pressure drop. We present a physics-based experimentally validated analytical model of coronary stenosis, which allows prediction of FFR based on stenosis dimensions and hyperaemic coronary flow with no empirical parameters.

Conductance catheter measurements of lumen area of stenotic coronary arteries: theory and experiment

An injection of saline solution is required for the measurement of vessel lumen area using a conductance catheter. The injection of room temperature saline to displace blood in a vessel inevitably involves mass and heat transport and electric field conductance. The objective of the present study is to understand the accuracy of conductance method based on the phenomena associated with the saline injection into a stenotic blood vessel. Computational fluid dynamics were performed to simulate flow and its relation to transport and electric field in a stenotic artery for two different sized conductance catheters (0.9 and 0.35 mm diameter) over a range of occlusions [56–84% cross-sectional area (CSA) stenosis]. The results suggest that the performance of conductance catheter is dependent on catheter size and severity of stenosis more significantly for 0.9 mm than for 0.35 mm catheter. Specifically, the time of detection of 95% of injected saline solution at the detection electrodes was shown to range from 0.67 to 3.7 s and 0.82 to 0.94 s for 0.9 mm and 0.35 mm catheter, respectively. The results also suggest that the detection electrodes of conductance catheter should be placed outside of flow recirculation region distal to the stenosis to minimize the detection time. Finally, the simulations show that the accuracy in distal CSA measurements, however, is not significantly altered by whether the position of detection electrodes is inside or outside of recirculation zone (error was within 12% regardless of detection electrodes position). The results were experimentally validated for one lesion geometry and the simulation results are within 8% of actual measurements. The simulation of conductance catheter injection method may lead to further optimization of device and method for accurate sizing of diseased coronary arteries, which has clinical relevance to percutaneous intervention.

New method to measure coronary velocity and coronary flow reserve

Coronary flow reserve (CFR) is an important index of coronary microcirculatory function. The objective of this study was to validate the reproducibility and accuracy of intravascular conductance catheter-based method for measurements of baseline and hyperemic coronary flow velocity (and hence CFR). The absolute coronary blood velocity was determined by measuring the time of transit of a saline injection between two pairs of electrodes (known distance) on a conductance catheter during a routine saline injection without the need for reference flow. In vitro validation was made in the velocity range of 5 to 70 cm/s in reference to the volume collection method. In 10 swine, velocity measurements were compared with those from a flow probe in coronary arteries at different CFR attained by microsphere embolization. In vitro, the mean difference between the proposed method and volume collection was 0.7 ± 1.34 cm/s for steady flow and −0.77 ± 2.22 cm/s for pulsatile flow. The mean difference between duplicate measurements was 0 ± 1.4 cm/s. In in vivo experiments, the flow (product of velocity and lumen cross-sectional area that is also measured by the conductance catheter) was determined in both normal and stenotic vessels and the mean difference between the proposed method and flow probe was −1 ± 12 ml/min (flow ranged from 10 to 130 ml/min). For CFR, the mean difference between the two methods was 0.06 ± 0.28 (range of 1 to 3). Our results demonstrate the reproducibility and accuracy of velocity and CFR measurements with a conductance catheter by use of a standard saline injection. The ability of the combined measurement of coronary lumen area (as previously validated) and current velocity and CFR measurements provides an integrative diagnostic tool for interventional cardiology.

Effect of blood pressure on vascular hemodynamics in acute tachycardia

Paroxysmal supraventricular tachycardia is accompanied by hypotension, which can affect vascular hemodynamics. Here, we hypothesized that a fall in blood flow as a result of hypotension has a larger effect on hemodynamics in medium-sized peripheral arteries compared with increased pulsatility in rapid pacing. To test this hypothesis, we experimentally and theoretically investigated hemodynamic changes in femoral, carotid, and subclavian arteries at heart rates of 95-170 beats/min after acute pacing. The arterial pressure, blood flow, and other hemodynamic parameters remained statistically unchanged for heart rates ≤ 135 beats/min. Systemic pressure and flow velocities, however, showed an abrupt decrease, resulting in larger alteration of hemodynamic parameters for heart rates ≥ 155 beats/min after pacing (initial period) and then recovered close to baseline after several minutes of pacing (recovery period). During the initial period, the pressure dropped from 88 mmHg (baseline) to 44 mmHg, and the flow velocity decreased to about one-third of baseline at heart rate of 170 beats/min. A hemodynamic analysis showed a velocity profile with a near-wall retrograde flow or a fully reversed flow during the initial period, which vanished at the recovery period. It was concluded that the initial fall of blood flow due to pressure drop led to transient flow reversal and negative wall shear stress because this phenomena was not observed at the recovery period. This study underscores the significant effects of hypotension on vascular hemodynamics, which may have relevance to physiology and chronic pathophysiology in paroxysmal supraventricular tachycardia.

Estimation of coronary length-volume allometric relations of human arteries in vivo using CT

Assessing the individual geometry of the coronary arteries in a patient can help to explain diffuse artery disease. Some allometric functions, relating arterial length and volume, were verified in porcine arteries and human autopsies but not in vivo. In this work we use skeletonization methods on MSCT images to render the whole coronary tree in healthy and cardiovascular patients. Twenty patients with and without coronary artery disease were recruited. The coronary was segmented with minimum user intervention. Vessels were separated and measured. A 3D coronary map was individually calculated. The allometric length-volume function L=k(v)V(β) was evaluated in each patient and plotted in a Log-Log scale. The coefficient k(v) ranged 1.00 ± 0.35. Slopes ranged β = 0.69-0.88 and seemed to overlap in the scatter Log plot. The analysis of covariance verified this perception and concluded that lines were parallel. In other words, the allometric function stood for all patients. Values were not different from other studies in humans and pigs. The combination of multislice CT with morphological extraction algorithms was effective to extract allometric functions from coronary arteries in patients and can be easily applied in the clinic.

Effects of vessel compliance on flow pattern in porcine epicardial right coronary arterial tree

The compliance of the vessel wall affects hemodynamic parameters which may alter the permeability of the vessel wall. Based on experimental measurements, the present study established a finite element (FE) model in the proximal elastic vessel segments of epicardial right coronary arterial (RCA) tree obtained from computed tomography. The motion of elastic vessel wall was measured by an impedance catheter and the inlet boundary condition was measured by an ultrasound flow probe. The Galerkin FE method was used to solve the Navier-Stokes and Continuity equations, where the convective term in the Navier-Stokes equation was changed in the arbitrary Lagrangian-Eulerian (ALE) framework to incorporate the motion due to vessel compliance. Various hemodynamic parameters (e.g., wall shear stress-WSS, WSS spatial gradient-WSSG, oscillatory shear index-OSI) were analyzed in the model. The motion due to vessel compliance affects the time-averaged WSSG more strongly than WSS at bifurcations. The decrease of WSSG at flow divider in elastic bifurcations, as compared to rigid bifurcations, implies that the vessel compliance decreases the permeability of vessel wall and may be atheroprotective. The model can be used to predict coronary flow pattern in subject-specific anatomy as determined by noninvasive imaging.