Impact of stent mis-sizing and mis-positioning on coronary fluid wall shear and intramural stress

3D-Printed Radiopaque Bioresorbable Stents to Improve Device Visualization

Bioresorbable stents (BRS) hold great promise for the treatment of many life-threatening luminal diseases. Tracking and monitoring of stents in vivo is critical for avoiding their malposition and inadequate expansion, which often leads to complications and stent failure. However, obtaining high X-ray visibility of polymeric BRS has been challenging because of their intrinsic radiolucency. This study demonstrates the use of photopolymerization-based 3D printing technique to fabricate radiopaque BRS by incorporating iodixanol, a clinical contrast agent, into a bioresorbable citrate-based polymer ink. The successful volumetric dispersion of the iodixanol through the 3D-printing process confers strong X-ray visibility of the produced BRS. Following in vitro degradation, the 3D-printed BRS embedded in chicken muscle maintains high X-ray visibility for at least 4 weeks. Importantly, the 3D-printed radiopaque BRS demonstrates good cytocompatibility and strong mechanical competence in crimping and expansion, which is essential for minimally invasive stent deployment. In addition, it is found that higher loading concentrations of iodixanol, e.g. 10 wt.%, results in more strut fractures in stent crimping and expansion. To conclude, this study introduces a facile strategy to fabricate radiopaque BRS through the incorporation of iodixanol in the 3D printing process, which could potentially increase the clinical success of BRS.

Effects of different positions of intravascular stent implantation in stenosed vessels on in-stent restenosis: An experimental and numerical simulation study

Percutaneous coronary intervention (PCI) has been widely used in the treatment of atherosclerosis, while in-stent restenosis (ISR) has not been completely resolved. Studies have shown that changes in intravascular mechanical environment are related to ISR. Hence, an in-depth understanding of the effects of stent intervention on vascular mechanics is important for clinically optimizing stent implantation and relieving ISR. Nine rabbits with stenotic carotid artery were collected by balloon injury. Intravascular stents were implanted into different longitudinal positions (proximal, middle and distal relative to the stenotic area) of the stenotic vessels for numerical simulations. Optical coherence tomography (OCT) scanning was performed to reconstruct the three-dimensional configuration of the stented carotid artery and blood flow velocity waveforms were collected by Doppler ultrasound. The numerical simulations were performed through direct solution of Naiver-Stokes equation in ANSYS. Results showed that the distributions of time-averaged wall shear stress (TAWSS), oscillating shear index (OSI) and relative residual time (RRT) in near-end segment were distinctively different from other regions of the stent which considered to promote restenosis for all three models. Spearman rank-correlation analysis showed a significant correlation between hemodynamic descriptors and the stent longitudinal positions (r_TAWSS = -0.718, r_OSI = 0.898, r_RRT = 0.818, p < 0.01). Histology results of the near-end segment showed neointima thickening deepened with the longitudinal positions of stent which was consistent with the numerical simulations. The results suggest that stent implantation can promote restenosis at the near-end segment. As the stenting position moves to distal end, the impact on ISR is more significant.

In vivo comparison of key quantitative parameters measured with 3D peripheral angiography, 2D peripheral quantitative angiography and intravascular ultrasound

The aim of this study was to compare the measures of luminal stenosis between the two-dimensional (2D) and three-dimensional (3D) Quantitative Vessel Analysis (QVA) generated by CAAS QVA software and intravascular ultrasound (IVUS). Invasive contrast angiography is considered gold standard for diagnostic imaging and intervention in both coronary and peripheral arterial disease. However, it is based on 2D images depicting complicated 3D arterial anatomy. To overcome these limitations, 3D QVA has been developed to bridge the gap between 2D QVA and endovascular imaging. Thirty porcine femoral angiograms (common, profunda and superficial) with matching intravascular ultrasound (IVUS) pullbacks featuring variable degree of stenosis were analysed by 2D QVA, 3D QVA and quantitative IVUS. All 3 modalities provided similar data regarding the length of the investigated segment. Median lumen diameter was nearly identical in IVUS (4.69 mm) and in 3D QVA (4.76 mm) but quite a bit lower in 2D QVA (4.47 mm, Kruskal-Wallis test p = 0.1648). Lumen area measured in 2D QVA was lower than in IVUS and in 3D QVA. Lumen areas rendered by IVUS and 3D QVA were similar. Bland-Altman plots showed that the lowest differences were observed between IVUS and 3D QVA. IVUS and 3D QVA results were consistently higher than 2D QVA. 3D QVA is a useful surrogate of IVUS for precise luminal morphology measurements of peripheral arteries, rendering results that are much closer to IVUS than 2D QVA can provide.

Biomechanical impact of provisional stenting and balloon dilatation on coronary bifurcation: clinical implications

In-stent restenosis (ISR) and stent thrombosis remain clinically significant problems for bifurcations. Although the role of wall shear stress (WSS) has been well investigated, the role of circumferential wall stresses (CWS) has not been well studied in provisional stenting with and without final kissing balloon (FKB). We hypothesized that the perturbation of CWS at the SB in provisional stenting and balloon dilatation is an important factor in addition to WSS, and, hence, may affect restenosis rates (i.e., higher CWS correlates with higher restenosis). To test this hypothesis, we developed computational models of stent, FKB at bifurcation, and finite element simulations that considered both fluid and solid mechanics of the vessel wall. We computed the stress ratio (CWS/WSS) to show potential correlation with restenosis in clinical studies (i.e., higher stress ratio correlates with higher restenosis). Our simulation results show that stenting in the main branch (MB) increases the maximum CWS in the side branch (SB) and, hence, yields a higher stress ratio in the SB, as compared with the MB. FKB dilatation decreases the CWS and increases WSS, which collectively lowers the stress ratio in the SB. The changes of stress ratio were correlated positively with clinical data in provisional stenting and FKB. Both fluid and solid mechanics need to be evaluated when considering various stenting techniques at bifurcations, as solid stresses also play an important role in clinical outcome. An integrative index of bifurcation mechanics is the stress ratio that considers both CWS and WSS.NEW & NOTEWORTHY Although the role of wall shear stress (WSS) has been well investigated, the role of circumferential wall stresses (CWS) has not been well studied in provisional stenting with and without final kissing balloon. Both fluid and solid mechanics need to be evaluated when considering various stenting techniques at bifurcations. An integrative index of bifurcation mechanics is the stress ratio that considers both CWS and WSS.

Microstructure-based biomechanics of coronary arteries in health and disease

Coronary atherosclerosis is the major cause of mortality and disability in developed nations. A deeper understanding of mechanical properties of coronary arteries and hence their mechanical response to stress is significant for clinical prevention and treatment. Microstructure-based models of blood vessels can provide predictions of arterial mechanical response at the macro- and micro-mechanical level for each constituent structure. Such models must be based on quantitative data of structural parameters (constituent content, orientation angle and dimension) and mechanical properties of individual adventitia and media layers of normal arteries as well as change of structural and mechanical properties of atherosclerotic arteries. The microstructural constitutive models of healthy coronary arteries consist of three major mechanical components: collagen, elastin, and smooth muscle cells, while the models of atherosclerotic arteries should account for additional constituents including intima, fibrous plaque, lipid, calcification, etc. This review surveys the literature on morphology, mechanical properties, and microstructural constitutive models of normal and atherosclerotic coronary arteries. It also provides an overview of current gaps in knowledge that must be filed in order to advance this important area of research for understanding initiation, progression and clinical treatment of vascular disease. Patient-specific structural models are highlighted to provide diagnosis, virtual planning of therapy and prognosis when realistic patient-specific geometries and material properties of diseased vessels can be acquired by advanced imaging techniques.

Impact of bifurcation dual stenting on endothelial shear stress

Despite advances in percutaneous coronary interventions and the introduction of drug eluding stents, in-stent restenosis and stent thrombosis remain a clinically significant problem for bifurcations. The aim of this study is to determine the effect of dual bifurcation stenting on hemodynamic parameters known to influence restenosis and thrombosis. We hypothesized that double stenting, especially with a longer side branch (SB) stent, likely has a negative effect on wall shear stress (WSS), WSS gradient (WSSG), and oscillatory shear index (OSI). To test this hypothesis, we developed computational models of dual stents at bifurcations and non-Newtonian blood simulations. The models were then interfaced, meshed, and solved in a validated finite-element package. Longer and shorter stents at the SB and provisional stenting were compared. It was found that stents placed in the SB at a bifurcation lowered WSS, but elevated WSSG and OSI. Dual stenting with longer SB stent had the most adverse impact on SB endothelial WSS, WSSG, and OSI, with low WSS region up to 50% more than the case with shorter SB stent. The simulations also demonstrated flow disturbances resulting from SB stent struts protruding into the main flow field near the carina, which may have implications on stent thrombosis. The simulations predict a negative hemodynamic role for SB stenting, which is exaggerated with a longer stent, consistent with clinical trial findings that dual-stenting is comparable or inferior to provisional stenting.

Three-dimensional virtual surgery models for percutaneous coronary intervention (PCI) optimization strategies

Percutaneous coronary intervention (PCI), especially coronary stent implantation, has been shown to be an effective treatment for coronary artery disease. However, in-stent restenosis is one of the longstanding unsolvable problems following PCI. Although stents implanted inside narrowed vessels recover normal flux of blood flows, they instantaneously change the wall shear stress (WSS) distribution on the vessel surface. Improper stent implantation positions bring high possibilities of restenosis as it enlarges the low WSS regions and subsequently stimulates more epithelial cell outgrowth on vessel walls. To optimize the stent position for lowering the risk of restenosis, we successfully established a digital three-dimensional (3-D) model based on a real clinical coronary artery and analysed the optimal stenting strategies by computational simulation. Via microfabrication and 3-D printing technology, the digital model was also converted into in vitro microfluidic models with 3-D micro channels. Simultaneously, physicians placed real stents inside them; i.e., they performed “virtual surgeries”. The hydrodynamic experimental results showed that the microfluidic models highly inosculated the simulations. Therefore, our study not only demonstrated that the half-cross stenting strategy could maximally reduce restenosis risks but also indicated that 3-D printing combined with clinical image reconstruction is a promising method for future angiocardiopathy research.