Polypropylene mesh coated with hyaluronic acid/polyvinyl alcohol composite hydrogel for preventing bowel adhesion

Polypropylene (PP) mesh is the most widely used prosthetic material in hernia repair. However, the efficacy of implanted PP mesh is often compromised by adhesion between viscera and PP mesh. Thus, there is a recognized need for developing an anti-adhesive PP mesh. Here, a composite hydrogel coated PP mesh with the prevention of adhesion after hernia repair was designed. The composite hydrogel coating was prepared from polyvinyl alcohol (PVA) and hyaluronic acid (HA) by using the freezing-thawing (FT) method. To overcome the shortcoming of the long time of the traditional freezing-thawing method, a small molecule 3,4-dihydroxyphenylacetic acid (DHPA) was introduced to promote the formation of composite hydrogel. The as-prepared composite hydrogel coating displayed modulus more closely resembling that of native abdominal wall tissue. In vitro studies illustrated that the resulting meshes showed excellent coating stability, hemocompatibility, and non-cytotoxicity. In vivo experiments using a rat abdominal wall defect model demonstrated that the composite hydrogel coated PP mesh could prevent the formation of adhesion, alleviate the inflammatory response, and reduce the deposition of collagen around the damaged tissue. These disclosed results manifested that the PP mesh coated with HA/PVA composite hydrogel might be a promising application in preventing adhesion for hernia repair.

Novel hybrid composites based on double-decker silsesquioxanes functionalized by methacrylate derivatives and polyvinyl alcohol as potential materials utilized in biomedical applications

The use of diverse biomaterials for regenerative medicine is constantly evolving. Therefore, looking for easy-to-scale-up materials in terms of preparation, less complex composition, and featuring structural and chemical stability seems justified. In this work, we report the preparation of double-decker silsesquioxane-based (DDSQ-based) composites, which, according to our best knowledge, have never been used as biomaterials. A family of methacrylate-substituted DDSQs was obtained starting from the previously reported hydroxyalkyl double-decker silsesquioxanes. In the resulting hybrids, methacrylate groups are attached to each other's lateral silicon atoms of DDSQ in trans positions, providing an excellent geometry for forming thin layers. In contrast to pure organic methacrylates, the covalent bonding of methacrylate derivatives to inorganic silsesquioxane core improves mechanics, cell adhesion, and migration properties. Furthermore, to increase the hydrophilicity of the resulting DDSQ-based hybrids, polyvinyl alcohol (PVA) was added. The entire system forms an easy-to-obtain two-component (DDSQ-PVA) composite, which was subjected without any upgrading additives to biological tests later in the research. The resulting biomaterials fulfill the requirements for potential medical applications. Human fibroblasts growing on prepared hybrid composites are characterized by proper spindle-shaped morphology, proliferation, and activation status similar to control conditions (cells cultured on PVA), as well as increased adhesion and migration abilities. The obtained results suggest that the prepared biomaterials may be used in regenerative medicine in the future.

pH and Thrombin Concentration Are Decisive in Synthesizing Stiff, Stable, and Open-Porous Fibrin-Collagen Hydrogel Blends without Chemical Cross-Linker

Fibrin-collagen hydrogel blends exhibit high potential for tissue engineering applications. However, it is still unclear whether the underlying cross-linking mechanisms are of chemical or physical nature. It is here hypothesized that chemical cross-linkers play a negligible role and that instead pH and thrombin concentration are decisive for synthetizing blends with high stiffness and hydrolytic stability. Different fibrin-collagen formulations (pure and with additional transglutaminase) are used and the blends' compaction rate, hydrolytic stability, compressive strength, and hydrogel microstructure are investigated. The effect of thrombin concentration on gel compaction is examined and the importance of pH control during synthesis observed. It is revealed that transglutaminase impairs gel stability and it is deduced that fibrin-collagen blends mainly cross-link by mechanical interactions due to physical fibril entanglement as opposed to covalent bonds from chemical cross-linking. High thrombin concentrations and basic pH during synthesis reduce gel compaction and enhance stiffness and long-term stability. Scanning electron microscopy reveals a highly interpenetrating fibrous network with unique, interconnected open-porous microstructures. Endothelial cells proliferate on the blends and form a confluent monolayer. This study reveals the underlying cross-linking mechanisms and presents enhanced fibrin-collagen blends with high stiffness, hydrolytic stability, and large, interconnected pores; findings that offer high potential for advanced tissue engineering applications.

A defined heat pretreatment of gelatin enables control of hydrolytic stability, stiffness, and microstructural architecture of fibrin-gelatin hydrogel blends

Fibrin-gelatin hydrogel blends exhibit high potential for tissue engineering in vitro applications. However, the means to tailor these blends in order to control their properties, thus opening up a broad range of new target applications, have been insufficiently explored. We hypothesized that a controlled heat treatment of gelatin prior to blend synthesis enables control of hydrolytic swelling and shrinking, stiffness, and microstructural architecture of fibrin-gelatin based hydrogel blends while providing tremendous long-term stability. We investigated these hydrogel blends' compressive strength, in vitro degradation stability, and microstructure in order to test this hypothesis. In addition, we examined the gel's ability to support endothelial cell proliferation and stretching of encapsulated smooth muscle cells. This research showed that a controlled heat pretreatment of the gelatin component strongly influenced the stiffness, swelling, shrinking, and microstructural architecture of the final blends regardless of identical gelatin mass fractions. All blends offered high long-term hydrolytic stability. In conclusion, the results of this study open the possibility to use this technique in order to tune low-concentrated, open-porous fibrin-based hydrogels, even in long-term tissue engineering in vitro experiments.

Lubricant skin on diverse biomaterials with complex shapes via polydopamine-mediated surface functionalization for biomedical applications

Implantable biomedical devices require an anti-biofouling, mechanically robust, low friction surface for a prolonged lifespan and improved performance. However, there exist no methods that could provide uniform and effective coatings for medical devices with complex shapes and materials to prevent immune-related side effects and thrombosis when they encounter biological tissues. Here, we report a lubricant skin (L-skin), a coating method based on the application of thin layers of bio-adhesive and lubricant-swellable perfluoropolymer that impart anti-biofouling, frictionless, robust, and heat-mediated self-healing properties. We demonstrate biocompatible, mechanically robust, and sterilization-safe L-skin in applications of bioprinting, microfluidics, catheter, and long and narrow medical tubing. We envision that diverse applications of L-skin improve device longevity, as well as anti-biofouling attributes in biomedical devices with complex shapes and material compositions.

Thermal, Mechanical and Biocompatibility Analyses of Photochemically Polymerized PEGDA250 for Photopolymerization-Based Manufacturing Processes

Novel fabrication techniques based on photopolymerization enable the preparation of complex multi-material constructs for biomedical applications. This requires an understanding of the influence of the used reaction components on the properties of the generated copolymers. The identification of fundamental characteristics of these copolymers is necessary to evaluate their potential for biomaterial applications. Additionally, knowledge of the properties of the starting materials enables subsequent tailoring of the biomaterials to meet individual implantation needs. In our study, we have analyzed the biological, chemical, mechanical and thermal properties of photopolymerized poly(ethyleneglycol) diacrylate (PEGDA) and specific copolymers with different photoinitiator (PI) concentrations before and after applying a post treatment washing process. As comonomers, 1,3-butanediol diacrylate, pentaerythritol triacrylate and pentaerythritol tetraacrylate were used. The in vitro studies confirm the biocompatibility of all investigated copolymers. Uniaxial tensile tests show significantly lower tensile strength (82% decrease) and elongation at break (76% decrease) values for washed samples. Altered tensile strength is also observed for different PI concentrations: on average, 6.2 MPa for 1.25% PI and 3.1 MPa for 0.5% PI. The addition of comonomers lowers elongation at break on average by 45%. Moreover, our observations show glass transition temperatures (T_g) ranging from 27 °C to 56 °C, which significantly increase with higher comonomer content. These results confirm the ability to generate biocompatible PEGDA copolymers with specific thermal and mechanical properties. These can be considered as resins for various additive manufacturing-based applications to obtain personalized medical devices, such as drug delivery systems (DDS). Therefore, our study has advanced the understanding of PEGDA multi-materials and will contribute to the future development of tools ensuring safe and effective individual therapy for patients.

Immunomodulatory Biomaterials for Tissue Repair

All implanted biomaterials are targets of the host's immune system. While the host inflammatory response was once considered a detrimental force to be blunted or avoided, in recent years, it has become a powerful force to be leveraged to augment biomaterial-tissue integration and tissue repair. In this review, we will discuss the major immune cells that mediate the inflammatory response to biomaterials, with a focus on how biomaterials can be designed to modulate immune cell behavior to promote biomaterial-tissue integration. In particular, the intentional activation of monocytes and macrophages with controlled timing, and modulation of their interactions with other cell types involved in wound healing, have emerged as key strategies to improve biomaterial efficacy. To this end, careful design of biomaterial structure and controlled release of immunomodulators can be employed to manipulate macrophage phenotype for the maximization of the wound healing response with enhanced tissue integration and repair, as opposed to a typical foreign body response characterized by fibrous encapsulation and implant isolation. We discuss current challenges in the clinical translation of immunomodulatory biomaterials, such as limitations in the use of in vitro studies and animal models to model the human immune response. Finally, we describe future directions and opportunities for understanding and controlling the biomaterial-immune system interface, including the application of new imaging tools, new animal models, the discovery of new cellular targets, and novel techniques for in situ immune cell reprogramming.

3D Printing of Micro- and Nanoscale Bone Substitutes: A Review on Technical and Translational Perspectives

Recent developments in three-dimensional (3D) printing technology offer immense potential in fabricating scaffolds and implants for various biomedical applications, especially for bone repair and regeneration. As the availability of autologous bone sources and commercial products is limited and surgical methods do not help in complete regeneration, it is necessary to develop alternative approaches for repairing large segmental bone defects. The 3D printing technology can effectively integrate different types of living cells within a 3D construct made up of conventional micro- or nanoscale biomaterials to create an artificial bone graft capable of regenerating the damaged tissues. This article reviews the developments and applications of 3D printing in bone tissue engineering and highlights the numerous conventional biomaterials and nanomaterials that have been used in the production of 3D-printed scaffolds. A comprehensive overview of the 3D printing methods such as stereolithography (SLA), selective laser sintering (SLS), fused deposition modeling (FDM), and ink-jet 3D printing, and their technical and clinical applications in bone repair and regeneration has been provided. The review is expected to be useful for readers to gain an insight into the state-of-the-art of 3D printing of bone substitutes and their translational perspectives.

Anti-biofouling assembly strategies for protein & cell repellent surfaces: a mini-review

The protein/cell interactions with the surface at the blood-biomaterial interface generally control the efficiency of biomedical devices. A wide range of active processes and slow kinetics occur simultaneously with many biomaterials in healthcare applications, leading to multiple biological reactions and reduced clinical functions. In this work, we present a brief review of studies as the interface between proteins and biomaterials. These include mechanisms of resistance to proteins, protein-rejecting polyelectrolyte multilayers, and coatings of hydrophilic, polysaccharide and phospholipid nature. The mechanisms required to attain surfaces that resist adhesion include steric exclusion, water-related effects, and volume effects. Also, approaches in the use of hydrophilic, highly hydrated, and electrically neutral coatings have demonstrated a good ability to decrease cell adhesion. Moreover, amongst the available methods, the approach of layer-by-layer deposition has been known as an interesting process to manipulate protein and cell adhesion behavior.

Blood biocompatibility enhancement of biomaterials by heparin immobilization: a review

Blood contacting materials are concerned with biocompatibility including thrombus formation, decrease blood coagulation time, hematology, activation of complement system, platelet aggression. Interestingly, recent research suggests that biocompatibility is increasing by incorporating various materials including heparin using different methods. Basic of heparin including uses and complications was mentioned, in which burst release of heparin is major issue. To minimize the problem of biocompatibility and unpredictable heparin release, present review article potentially reviews the reported work and investigates the various immobilization methods of heparin onto biomaterials, such as polymers, metals, and alloys. Detailed explanation of different immobilization methods through different intermediates, activation, incubation method, plasma treatment, irradiations and other methods are also discussed, in which immobilization through intermediates is the most exploitable method. In addition to biocompatibility, other required properties of biomaterials like mechanical and corrosion resistance properties that increase by attachment of heparin are reviewed and discussed in this article.

Amyloid Aggregates of Smooth-Muscle Titin Impair Cell Adhesion

Various amyloid aggregates, in particular, aggregates of amyloid β-proteins, demonstrate in vitro and in vivo cytotoxic effects associated with impairment of cell adhesion. We investigated the effect of amyloid aggregates of smooth-muscle titin on smooth-muscle-cell cultures. The aggregates were shown to impair cell adhesion, which was accompanied by disorganization of the actin cytoskeleton, formation of filopodia, lamellipodia, and stress fibers. Cells died after a 72-h contact with the amyloid aggregates. To understand the causes of impairment, we studied the effect of the microtopology of a titin-amyloid-aggregate-coated surface on fibroblast adhesion by atomic force microscopy. The calculated surface roughness values varied from 2.7 to 4.9 nm, which can be a cause of highly antiadhesive properties of this surface. As all amyloids have the similar structure and properties, it is quite likely that the antiadhesive effect is also intrinsic to amyloid aggregates of other proteins. These results are important for understanding the mechanisms of the negative effect of amyloids on cell adhesion.

Fabrication and Characterization of Antimicrobial Magnetron Cosputtered TiO2/Ag/Cu Composite Coatings

The aim of this study was to prepare TiO2/Ag/Cu magnetron co-sputtered coatings with controlled characteristics and to correlate them with the antimicrobial activity of the coated glass samples. The elemental composition and distribution, surface morphology, wettability, surface energy and its component were estimated as the surface characteristics influencing the bioadhesion. Well expressed, specific, Ag/Cu concentration-dependent antimicrobial activity in vitro was demonstrated toward Gram-negative and Gram-positive standard test bacterial strains both by diffusion 21 assay and by Most Probable Number of surviving cells. Direct contact and eluted silver/coper nanoparticles killing were experimentally demonstrated as a mode of the antimicrobial action of the studied TiO2/Ag/Cu thin composite coatings. It is expected that they would ensure a broad spectrum bactericidal activity during the indwelling of the coated medical devices and for at least 12 h after that, with the supposition that the benefits will be over a longer time.

A review: progress in preventing tissue adhesions from a biomaterial perspective

Postoperative adhesions (POA) are one of the main problems suffered by patients and are a common complaint. It is considered to be closely associated with the healing mechanism of damaged tissues. Tissue adhesions accompany other symptoms such as inflammation, pain, and even dyskinesia under certain conditions, compromising the patients' quality of life. On the other hand, common treatments involve high costs, re-surgery or long-term hospital stays. Therefore, alternative approaches need to be formulated so that aforementioned problems can be resolved. To this end, a review of recent advances in this context is imperative. In this review, we have highlighted the mechanism of adhesion formation, advances in common therapeutic approaches, and prospective treatments in preventing tissue adhesions. Based on the literature, it can be determined that the disadvantages of available commercial products in the treatment of tissue adhesion have led researchers to utilize alternative methods for designing anti-adhesive products with different structures such as electrospun fibrous mats, hydrogels, and nanospheres. These studies are on the fast track in producing optimal anti-adhesion materials. We hope that this article can attract attention by showing various mechanisms and solutions involved in adhesion problems and inspire the further development of anti-adhesion biomaterials.

Elucidation of Antimicrobial Silver Sulfadiazine (SSD) Blend/Poly(3-Hydroxybutyrate-co-4-Hydroxybutyrate) Immobilised with Collagen Peptide as Potential Biomaterial

The quest for a suitable biomaterial for medical application and tissue regeneration has resulted in the extensive research of surface functionalization of material. Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] is a bacterial polymer well-known for its high levels of biocompatibility, non-genotoxicity, and minimal tissue response. We have designed a porous antimicrobial silver SSD blend/poly(3HB-co-4HB)-collagen peptide scaffold using a combination of simple techniques to develop a scaffold with an inter-connected microporous pore in this study. The collagen peptide was immobilised via -NH₂ group via aminolysis. In order to improve the antimicrobial performance of the scaffold, silver sulfadiazine (SSD) was impregnated in the scaffolds. To confirm the immobilised collagen peptide and SSD, the scaffold was characterized using FTIR. Herein, based on the cell proliferation assay of the L929 fibroblast cells, enhanced bioactivity of the scaffold with improved wettability facilitated increased cell proliferation. The antimicrobial activity of the SSD blend/P(3HB-co-4HB)-collagen peptide in reference to the pathogenic Gram-negative, Gram-positive bacteria and yeast Candida albicans exhibited SSD blend/poly(3HB-co-4HB)-12.5 wt% collagen peptide as significant construct of biocompatible antibacterial biomaterials. Thus, SSD blend/P(3HB-co-4HB)-collagen peptide scaffold from this finding has high potential to be further developed as biomaterial.

Endothelialization of PDMS-based microfluidic devices under high shear stress conditions

Microfluidic systems made out of polydimethylsiloxane (PDMS) offer a platform to mimic vascular flow conditions in model systems at well-defined shear stresses. However, extracellular matrix (ECM) proteins that are physisorbed on the PDMS are not reliably attached under high shear stress conditions, which makes long-term experiments difficult. To overcome this limitation, we functionalized PDMS surfaces with 3-aminopropyltriethoxysilane (APTES) by using different surface activation methods to develop a stable linkage between the PDMS surface and collagen, which served as a model ECM protein. The stability of the protein coating inside the microfluidic devices was evaluated in perfusion experiments with phosphate-buffered saline (PBS) at 10-40 dynes/cm² wall shear stress. To assess the stability of cell adhesion, endothelial cells were grown in a multi-shear device over a shear stress range of 20-150 dynes/cm². Cells on the APTES-mediated collagen coating were stable over the entire shear stress range in PBS (pH 9) for 48 h. The results suggest that at high pH values, the electrostatic interaction between APTES-coated surfaces and collagen molecules offer a very promising tool to modify PDMS-based microfluidic devices for long-term endothelialization under high shear stress conditions.

Facile manufacturing of fused deposition modelled composite scaffold for tissue engineering - An embedment model with plasticity for incorporation of additives

Fused deposition modeling (FDM) process is carried out at an elevated temperature, preventing the addition of biological factors, drugs, bioactive compounds, etc., during fabrication. To surpass this disadvantage, 3D interlinked porous PLA (Polylactic acid) scaffold was fabricated by FDM, followed by embedment of PCL (polycaprolactone) scaffold into the pores of PLA at room temperature yielding PLA-PCL scaffold. In addition, PLA-PCL scaffold with nanohydroxyapatite (PLA-PCL-nHAP) and multiwalled carbon nanotubes (PLA-PCL-MWCNT) were also fabricated. Herein, FDM fabricated PLA scaffold functions as a "structural component" whereas embedded PCL scaffold acts as "functional component" which provides a provision to functionalize the scaffolds with desired chemical or biological materials. The embedment process is straightforward, cost effective, and does not require sophistication. Mechanical characterization of scaffolds suggests Young's modulus of PLA-PCL scaffold (16.02 MPa) was higher than FDM fabricated PLA (9.98 MPa) scaffold by virtue of embedded PCL matrix. Besides, Finite element analysis showed, von Mises stress on mandible with scaffolds at 4.04 MPa, whereas mandible with the defect was 6.7 MPa suggesting stress distribution efficiency and mechanical stability of these scaffolds. Further, field emission scanning electron microscope (FESEM) analysis implied interlinked porous structures with a pore diameter of 50 µm to 300 µm. X-Ray diffraction (XRD) results revealed an increased crystallinity (%) of embedment models (PLA-PCL, PLA-PCL-nHAP and PLA-PCL-MWCNT) compared to PLA printed scaffold. Additionally, Raman analysis revealed that the embedment process did not impart chemical alterations in polymeric chains. In vitro analysis with human osteoblasts exhibited osteoconductive nature of the scaffold by supporting mineralization. In brief, the advantages the model is that, it helps to overcome the hassles of manufacturing a filament with desired additives for FDM, and offers provision to incorporate desired concentrations of heat labile bioactive molecules during embedment process at ambient temperature.

Interaction of enzymes with lignocellulosic materials: causes, mechanism and influencing factors

For the production of biofuel (bioethanol), enzymatic adsorption onto a lignocellulosic biomass surface is a prior condition for the enzymatic hydrolysis process to occur. Lignocellulosic substances are mainly composed of cellulose, hemicellulose and lignin. The polysaccharide matrix (cellulose and hemicellulose) is capable of producing bioethanol. Therefore, lignin is removed or its concentration is reduced from the adsorption substrates by pretreatments. Selected enzymes are used for the production of reducing sugars from cellulosic materials, which in turn are converted to bioethanol. Adsorption of enzymes onto the substrate surface is a complicated process. A large number of research have been performed on the adsorption process, but little has been done to understand the mechanism of adsorption process. This article reviews the mechanisms of adsorption of enzymes onto the biomass surfaces. A conceptual adsorption mechanism is presented which will fill the gaps in literature and help researchers and industry to use adsorption more efficiently. The process of enzymatic adsorption starts with the reciprocal interplay of enzymes and substrates and ends with the establishment of molecular and cellular binding. The kinetics of an enzymatic reaction is almost the same as that of a characteristic chemical catalytic reaction. The influencing factors discussed in detail are: surface characteristics of the participating materials, the environmental factors, such as the associated flow conditions, temperature, concentration, etc. Pretreatment of lignocellulosic materials and optimum range of shear force and temperature for getting better results of adsorption are recommended.

Novel 3D Hybrid Nanofiber Scaffolds for Bone Regeneration

Development of hybrid scaffolds and their formation methods occupies an important place in tissue engineering. In this paper, a novel method of 3D hybrid scaffold formation is presented as well as an explanation of the differences in scaffold properties, which were a consequence of different crosslinking mechanisms. Scaffolds were formed from 3D freeze-dried gelatin and electrospun poly(lactide-co-glicolide) (PLGA) fibers in a ratio of 1:1 w/w. In order to enhance osteoblast proliferation, the fibers were coated with hydroxyapatite nanoparticles (HAp) using sonochemical processing. All scaffolds were crosslinked using an EDC/NHS solution. The scaffolds' morphology was imaged using scanning electron microscopy (SEM). The chemical composition of the scaffolds was analyzed using several methods. Water absorption and mass loss investigations proved a higher crosslinking degree of the hybrid scaffolds than a pure gelatin scaffold, caused by additional interactions between gelatin, PLGA, and HAp. Additionally, mechanical properties of the 3D hybrid scaffolds were higher than traditional hydrogels. In vitro studies revealed that fibroblasts and osteoblasts proliferated and migrated well on the 3D hybrid scaffolds, and also penetrated their structure during the seven days of the experiment.

Microcarriers for Upscaling Cultured Meat Production

Due to the considerable environmental impact and the controversial animal welfare associated with industrial meat production, combined with the ever-increasing global population and demand for meat products, sustainable production alternatives are indispensable. In 2013, the world's first laboratory grown hamburger made from cultured muscle cells was developed. However, coming at a price of $300.000, and being produced manually, substantial effort is still required to reach sustainable large-scale production. One of the main challenges is scalability. Microcarriers (MCs), offering a large surface/volume ratio, are the most promising candidates for upscaling muscle cell culture. However, although many MCs have been developed for cell lines and stem cells typically used in the medical field, none have been specifically developed for muscle stem cells and meat production. This paper aims to discuss the MCs' design criteria for skeletal muscle cell proliferation and subsequently for meat production based on three scenarios: (1) MCs are serving only as a temporary substrate for cell attachment and proliferation and therefore they need to be separated from the cells at some stage of the bioprocess, (2) MCs serve as a temporary substrate for cell proliferation but are degraded or dissolved during the bioprocess, and (3) MCs are embedded in the final product and therefore need to be edible. The particularities of each of these three bioprocesses will be discussed from the perspective of MCs as well as the feasibility of a one-step bioprocess. Each scenario presents advantages and drawbacks, which are discussed in detail, nevertheless the third scenario appears to be the most promising one for a production process. Indeed, using an edible material can limit or completely eliminate dissociation/degradation/separation steps and even promote organoleptic qualities when embedded in the final product. Edible microcarriers could also be used as a temporary substrate similarly to scenarios 1 and 2, which would limit the risk of non-edible residues.

POLYMERIC BIOMATERIALS FOR SCAFFOLD-BASED BONE REGENERATIVE ENGINEERING

Reconstruction of large bone defects resulting from trauma, neoplasm, or infection is a challenging problem in reconstructive surgery. The need for bone grafting has been increasing steadily partly because of our enhanced capability to salvage limbs after major bone loss. Engineered bone graft substitutes can have advantages such as lack of antigenicity, high availability, and varying properties depending on the applications chosen for use. These favorable attributes have contributed to the rise of scaffold-based polymeric tissue regeneration. Critical components in the scaffold-based polymeric regenerative engineering approach often include 1. The existence of biodegradable polymeric porous structures with properties selected to promote tissue regeneration and while providing appropriate mechanical support during tissue regeneration. 2. Cellular populations that can influence and enhance regeneration. 3. The use of growth and morphogenetic factors which can influence cellular migration, differentiation and tissue regeneration in vivo. Biodegradable polymers constitute an attractive class of biomaterials for the development of scaffolds due to their flexibility in chemistry and their ability to produce biocompatible degradation products. This paper presents an overview of polymeric scaffold-based bone tissue regeneration and reviews approaches as well as the particular roles of biodegradable polymers currently in use.

Designing Novel Interfaces via Surface Functionalization of Short-Chain-Length Polyhydroxyalkanoates

Polyhydroxyalkanoates (PHA), a microbial plastic has emerged as promising biomaterial owing to the broad range of mechanical properties. However, some studies revealed that PHA is hydrophobic and has no recognition site for cell attachment and this is often a limitation in tissue engineering aspects. Owing to this, the polymer is tailored accordingly in order to enhance the biocompatibilityin vivoas well as to suit the intended application. Thus far, these surface modifications have led to PHA being widely used in various biomedical and pharmaceutical applications such as cardiac patches, wound management, nerve, bone, and cartilage repair. This review addresses the surface modification on biomedical applications focusing on short-chain-length PHA such as poly(3-hydroxybutyrate) [P(3HB)], poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)].

Chitosan hydrogel scaffold reinforced with twisted poly(l lactic acid) aligned microfibrous bundle to mimic tendon extracellular matrix

Regeneration of tendon requires construct that provides necessary structural support closely mimicking the native architecture. To recreate this complex architecture a construct made of heat-treated, twisted poly(L lactic acid) (PLLA) microfibers coated with chitosan gel and surrounded by PLLA micro-fibrous layer was developed. The developed construct characterized using SEM showed the macroporous nature of gel coating around four distinct PLLA twisted fibrous bundle and a thin fiber layer surrounding the construct. FTIR analysis confirmed the presence of PLLA and chitosan construct. Mechanical strength increased with increasing number of strips. Protein adsorption was significantly low on the construct with outer covering that could retard cell adhesion to the outer layer. The developed construct showed good cell attachment and proliferation of tenocytes. These results indicate that the construct would find application for tendon tissue engineering.

A review of nanostructured surfaces and materials for dental implants: surface coating, patterning and functionalization for improved performance

The emerging field of nanostructured implants has enormous scope in the areas of medical science and dental implants. Surface nanofeatures provide significant potential solutions to medical problems by the introduction of better biomaterials, improved implant design, and surface engineering techniques such as coating, patterning, functionalization and molecular grafting at the nanoscale. This review is of an interdisciplinary nature, addressing the history and development of dental implants and the emerging area of nanotechnology in dental implants. After a brief introduction to nanotechnology in dental implants and the main classes of dental implants, an overview of different types of nanomaterials (i.e. metals, metal oxides, ceramics, polymers and hydrides) used in dental implant together with their unique properties, the influence of elemental compositions, and surface morphologies and possible applications are presented from a chemical point of view. In the core of this review, the dental implant materials, physical and chemical fabrication techniques and the role of nanotechnology in achieving ideal dental implants have been discussed. Finally, the critical parameters in dental implant design and available data on the current dental implant surfaces that use nanotopography in clinical dentistry have been discussed.

Superior Bioinert Capability of Zwitterionic Poly(4-vinylpyridine propylsulfobetaine) Withstanding Clinical Sterilization for Extended Medical Applications

The field of bioinert materials is relatively mature, as unique molecular designs for antifouling have been regularly presented over the past 30 years. However, the effect of steam sterilization, a common procedure in hospitals for sterilizing biomedical devices in clinical uses, on the stability of antifouling and hemocompatible biomaterials remains unexplored. The only available set of data indicates that poly(sulfobetaine methacrylate) (SBMA) is unstable and loses its antifouling properties when exposed to hot humid air, depriving it of its attractiveness. Here, we present zwitterionic biomaterial gels of poly(4-vinylpyridine propylsulfobetaine) (4VPPS) and explore their propensity to biofouling before and after a 1 h steam sterilization at 121 °C. After incubation with erythrocytes, leukocytes, thrombocytes, whole blood, or various bacteria ( Escherichia coli, Stenotrophomonas maltophilia), the antifouling properties of unsterilized 4VPPS gels are comparable to those of SBMA gels. Importantly, they are maintained after steam sterilization, unlike those of SBMA gels, which shows that the structure of 4VPPS and the interactions with water remain unaffected by the humid heat treatment. The antifouling properties of gels coated on materials mimicking surfaces used in biomedical devices including stainless steel (surgical knife), silicon (biochips), or titanium (electrocautery pen) are also maintained after similar sterilization. In addition, repeated sterilizations do not affect the antifouling properties of 4VPPS. Therefore, these results provide a substantial advance over the current knowledge on antifouling materials for repeated usage in actual conditions that often involve, in a biomedical environment, steam sterilization.

Emphasized Mechanistic Antimicrobial Study of Biofunctionalized Silver Nanoparticles on Model Proteus mirabilis

Antimicrobial study of biofunctionalized silver nanoparticles has been done with the emphasis on its mechanism on both gram positive and negative bacteria. The biofunctionalized silver nanoparticles are employed considering their importance in green chemistry with respect to easy synthesis, usefulness, and economic synthetic procedure involved. The stability of these nanoparticles was determined by zeta potential analyzer. The probable mechanism of antibacterial activity was performed on Proteus mirabilis by field emission scanning electron microscopy (FESEM) and energy dispersive spectroscopy (EDAX) study which does not show the presence of silver. The free radicals generated by silver nanoparticles were responsible for lethal antibacterial activity by rupturing the cell surface which causes improper nutrient and signal supply. Free radical scavenging efficacy of silver nanoparticles was confirmed by 1,1-Diphenyl-2-picrylhydrazyl (DPPH) method. AgNP enhanced the membrane leakage of reducing sugars by destroying the proteins existing on the cell wall. These nanoparticles are found to be toxic against human pathogens and are highly effective on Staphylococcus aureus. The effect of silver nanoparticles is concentration dependent and independent of the type of strains used.

Bioinspired thermoresponsive nanoscaled coatings: Tailor-made polymer brushes with bioconjugated arginine-glycine-aspartic acid-peptides

The development of bioengineered surface coatings with stimuli-responsive properties is beneficial for a number of biomedical applications. Environmentally responsive and switchable polymer brush systems have a great potential to create such smart biointerfaces. This study focuses on the bioconjugation of cell-instructive peptides, containing the arginine-glycine-aspartic acid tripeptide sequence (RGD motif), onto well-defined polymer brush films. Herein, the highly tailored end-grafted homo polymer brushes are either composed of the polyelectrolyte poly(acrylic) acid (PAA), providing the reactive carboxyl functionalities, or of the temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm). Of particular interest is the preparation of grafted-to binary brushes using both polymers and their subsequent conversion to RGD-biofunctionalized PNIPAAm-PAA binary brushes by a carbodiimide conjugation method. The bioconjugation process of two linear RGD-peptides Gly-Arg-Gly-Asp-Ser and Gly-Arg-Gly-Asp-Ser-Pro-Lys and one cyclic RGD-peptide cyclo(Arg-Gly-Asp-D-Tyr-Lys) is comparatively investigated by complementary analysis methods. Both techniques, in situ attenuated total reflectance Fourier transform infrared spectroscopy measurements and the in situ spectroscopic ellipsometric analysis, describe changes of the brush surface properties due to biofunctionalization. Besides, the bound RGD-peptide amount is quantitatively evaluated by ellipsometry in comparison to high performance liquid chromatography analysis data. Additionally, molecular dynamic simulations of the RGD-peptides themselves allow a better understanding of the bioconjugation process depending on the peptide properties. The significant influence on the bioconjugation result can be derived, on the one hand, of the polymer brush composition, especially from the PNIPAAm content, and, on the other hand, of the peptide dimension and its reactivity.

Schwann cell durotaxis can be guided by physiologically relevant stiffness gradients

Background

Successful nerve regeneration depends upon directed migration of morphologically specialized repair state Schwann cells across a nerve defect. Although several groups have studied directed migration of Schwann cells in response to chemical or topographic cues, the current understanding of how the mechanical environment influences migration remains largely understudied and incomplete. Therefore, the focus of this study was to evaluate Schwann cell migration and morphodynamics in the presence of stiffness gradients, which revealed that Schwann cells can follow extracellular gradients of increasing stiffness, in a form of directed migration termed durotaxis.

Methods

Polyacrylamide substrates were fabricated to mimic the range of stiffness found in peripheral nerve tissue. We assessed Schwann cell response to substrates that were either mechanically uniform or embedded with a shallow or steep stiffness gradient, respectively corresponding to the mechanical niche present during either the fluid phase or subsequent matrix phase of the peripheral nerve regeneration process. We examined cell migration (velocity and directionality) and morphology (elongation, spread area, nuclear aspect ratio, and cell process dynamics). We also characterized the surface morphology of Schwann cells by scanning electron microscopy.

Results

On laminin-coated polyacrylamide substrates embedded with either a shallow (∼0.04 kPa/mm) or steep (∼0.95 kPa/mm) stiffness gradient, Schwann cells displayed durotaxis, increasing both their speed and directionality along the gradient materials, fabricated with elastic moduli in the range found in peripheral nerve tissue. Uniquely and unlike cell behavior reported in other cell types, the durotactic response of Schwann cells was not dependent upon the slope of the gradient. When we examined whether durotaxis behavior was accompanied by a pro-regenerative Schwann cell phenotype, we observed altered cell morphology, including increases in spread area and the number, elongation, and branching of the cellular processes, on the steep but not the shallow gradient materials. This phenotype emerged within hours of the cells adhering to the materials and was sustained throughout the 24 hour duration of the experiment. Control experiments also showed that unlike most adherent cells, Schwann cells did not alter their morphology in response to uniform substrates of different stiffnesses.

Conclusion

This study is notable in its report of durotaxis of cells in response to a stiffness gradient slope, which is greater than an order of magnitude less than reported elsewhere in the literature, suggesting Schwann cells are highly sensitive detectors of mechanical heterogeneity. Altogether, this work identifies durotaxis as a new migratory modality in Schwann cells, and further shows that the presence of a steep stiffness gradient can support a pro-regenerative cell morphology.

Electronic supplementary material

The online version of this article (10.1186/s40824-018-0124-z) contains supplementary material, which is available to authorized users.

A high-performance polydimethylsiloxane electrospun membrane for cell culture in lab-on-a-chip

Thin porous membranes are important components in a microfluidic device, serving as separators, filters, and scaffolds for cell culture. However, the fabrication and the integration of these membranes possess many challenges, which restrict their widespread applications. This paper reports a facile technique to fabricate robust membrane-embedded microfluidic devices. We integrated an electrospun membrane into a polydimethylsiloxane (PDMS) device using the simple plasma-activated bonding technique. To increase the flexibility of the membrane and to address the leakage problem, the electrospun membrane was fabricated with the highest weight ratio of PDMS to polymethylmethacrylate (i.e., 6:1 w/w). The membrane-integrated microfluidic device could withstand a flow rate of up to 50 μl/min. As a proof of concept, we demonstrated that such a compartmentalized microfluidic platform could be successfully used for cell culture with the capability of providing a more realistic in vivo-like condition. Human lung cancer epithelial cells (A549) were seeded on the membrane from the top microchannel, while the continuous flow of the culture medium through the bottom microchannel provided a shear-free cell culture condition. The tortuous micro-/nanofibers of the membrane immobilized the cells within the hydrophobic micropores and with no need of extracellular matrix for cell adhesion and cell growth. The hydrophobic surface conditions of the membrane were suitable for anchorage-independent cell types. To further extend the application of the device, we qualitatively showed that rinsing the membrane with ethanol prior to cell seeding could temporarily render the membrane hydrophilic and the platform could also be used for anchorage-dependent cells. Due to the three-dimensional (3D) topography of the membranes, three different configurations were observed, including individual single cells, monolayer cells, and 3D cell clusters. This cost-effective and robust compartmentalized microfluidic device may open up new avenues in translational medicine and pharmacodynamics research.

Silk fibroin/amniotic membrane 3D bi-layered artificial skin

Burn injuries have been reported to be an important cause of morbidity and mortality and they are still considered as unmet clinical need. Although there is a myriad of effective stem cells that have been suggested for skin regeneration, there is no one ideal scaffold. The aim of this study was to develop a three-dimensional (3D) bi-layer scaffold made of biological decellularized human amniotic membrane (AM) with viscoelastic electrospun nanofibrous silk fibroin (ESF) spun on top. The fabricated 3D bi-layer AM/ESF scaffold was submerged in ethanol to induce β-sheet transformation as well as to get a tightly coated and inseparable bi-layer. The biomechanical and biological properties of the 3D bi-layer AM/ESF scaffold were investigated. The results indicate significantly improved mechanical properties of the AM/ESF compared with the AM alone. Both the AM and AM/ESF possess a variety of suitable adhesion cells without detectable cytotoxicity against adipose tissue-derived mesenchymal stem cells (AT-MSCs). The AT-MSCs show increased expression of two main pro-angiogenesis factors, vascular endothelial growth factor and basic fibroblast growth factor, when cultured on the AM/ESF for 7 days, when comparing with AM alone. The results suggest that the AM/ESF scaffold with autologous AT-MSCs has excellent cell adhesion and proliferation along with production of growth factors which serves as a possible application in a clinical setting for skin regeneration.

In vitro biocompatibility analysis of functionalized poly(vinyl chloride)/layered double hydroxide nanocomposites

The aim of this study was to examine the cytotoxicity and biocompatibility of functionalized poly(vinyl chloride) (PVC)/layered double hydroxide (LDH) nanocomposites.

Surface interaction parameter measurement of solvated polymers via model end-tethered chains

We present a method for the direct measurement of the relative energy of interaction between a solvated polymer and a solid interface. By tethering linear chains covalently to the surface, we ensured the idealized and constant configuration of polymer molecules for measurement, modeling, and parameter estimation. For the case of amine-terminated polystyrene bound to a glycidoxypropyl silane film submerged in cyclohexane-d12, we estimated the χ parameter for the temperature range 10.7 °C to 52.0 °C, and found a downward sloping trend that crosses the χ = 0.5 threshold at 37 °C to 40 °C, in agreement with solution estimates for the same system. We simultaneously estimated the surface interaction parameter χ_s at each temperature, finding a decreasing affinity of the chains for the surface with increasing temperature, consistent with empirical observations. The theoretical model shows some limitations in a stronger solvent (toluene-d8) that prevent rigorous parameter estimation, but we demonstrate a qualitative change in χ and χ_s towards stronger solvency and weaker surface interaction with increasing temperature.

Functionalised nanostructures for transdermal delivery of drug cargos

Nanotechnology has burgeoned over last decade exploring varieties of novel applications in all areas of science and technology. Utilisation of bio-friendly polymers for engineering nanostructures (NS) improves safety and efficacy in drug delivery. Biopolymers not merely employed for fabricating drug carriers but also leveraged for surface functionalisation of other NS to impart bio-mimicking properties. Biopolymer functionalised NS garnered researcher's attention because of their potential to enhance skin permeability of drug cargo. Biopolymers, i.e. cell-penetrating peptides (CPP), chitosan and hyaluronic acid not only enhance skin permeability but also add multiple functions due to their intrinsic biomimetic properties. This multifunctional drug delivery system is a promising tool to achieve skin delivery of large number of therapeutic agents. In this review, functionalisation of NS with biopolymers particularly polysaccharides and polypeptides is discussed in detail. In particular, applications of these functionalised NS for TDDS is elaborated. Moreover, this review provides framework for elaborating importance of functionalisation of NS to enhance skin permeability and depicts advantages of biopolymers to construct more biocompatible carriers for drug cargos.

Nanomechanics of pH-Responsive, Drug-Loaded, Bilayered Polymer Grafts

Stimuli-responsive polymer films play an important role in the development of smart antibacterial coatings. In this study, we consider complementary architectures of polyelectrolyte films, including a thin chitosan layer (CH), poly(acrylic acid) (PAA) brushes, and a bilayer structure of CH grafted to PAA brushes (CH/PAA) as possible candidates for targeted drug delivery platforms. Atomic force microscopy (AFM) was employed to study the structure-mechanical property relationship for these mono- and bi-layered polymer grafts at pH 7.4 and 4.0, corresponding to physiological and biofilm formation conditions, respectively. Herein, the surface interactions between polymer grafts and the negatively charged silica colloid attached to an AFM lever are considered as representative interactions between the antibacterial coating and a bacteria/biofilm. The bilayered structure of CH/PAA showed significantly reduced adhesive interactions in comparison to pure CH but slightly higher interactions in comparison to PAA films. Among PAA and CH/PAA films, upon grafting CH over the PAA brushes, the normal stiffness increased by 10-fold at pH 7.4 and 20-fold at pH 4.0. Notably, the study also showed that the addition of an antibiotic drug such as multicationic Tobramycin (TOB) impacts the mechanical properties of the antibacterial coatings. Competition between TOB and water molecules for the PAA chains is shown to determine the structural properties of PAA and CH/PAA films loaded with TOB. At high pH (7.4), the TOB molecules, which remain multicationic, strongly interact with polyanionic PAA, thereby reducing the film's compressibility. On the contrary, at low pH (4.0), the water molecules preferentially interact with TOB in comparison to uncharged PAA chains and, upon TOB release, results in a stronger film collapse together with an increase in adhesive interactions between the probe, the surface, and the elastic modulus of the film. The bacterial proliferation on these platforms when compared to the measured mechanical properties shows a direct correlation; hence, understanding nanomechanical properties can provide insights into designing new antibacterial polymer coatings.

Novel peptides for small-caliber graft functionalization selected by a phage display of endothelial-positive/platelet-negative combined selection

A new protocol to identify peptides with EPCs high affinity and at the same time the ability to suppress the interaction with platelets was presented.

Physically entrapped gelatin in polyethylene glycol scaffolds for three-dimensional chondrocyte culture

Developing tissue-engineered constructs for clinical use must satisfy the fundamental biologic parameters of biocompatibility, cell adhesiveness, and biodegradability. Physical entrapment of bioactive agents into synthetic polymers, as three-dimensional scaffolds, holds great promise for cell culture applications. Here, in an attempt to elucidate the effects of physical interlocking of natural and synthetic gel networks on cell responses within three-dimensional microenvironments, gelatin (of different concentrations) was physically incorporated into macroporous polyethylene glycol (PEG) hydrogels to fabricate PEG-GEL1 (10:1, PEG:gelatin) and PEG-GEL5 (10:5, PEG:gelatin). The effect of the physically entrapped gelatin on primary chondrocytes was investigated in relation to cell distribution, morphology and viability, proliferation, gene expression, and extracellular matrix accumulation in vitro. Our findings have shown successful incorporation of two different concentrations of gelatin into polyethylene glycol macroporous hydrogels through physical mixing. These physical blends not only enhanced chondrocyte adhesion and proliferation but also boosted gene expression of collagen II and aggrecan after 14 days in culture. Although results demonstrated that gelatin levels dropped sharply in PEG-GEL1 and PEG-GEL5 in the first 7 days, however evidently, after days 14 and 21 gelatin levels in both groups remained substantially unchanged and in turn enhanced glycosaminoglycan formation in vitro. Thus, the modification of polyethylene-glycol-based scaffolds with physically entrapped gelatin may be sufficient for dictating three-dimensional microenvironments for chondrocyte cultures.

Analysis of the biocompatibility of perfluoropolyether dimethacrylate network using an organotypic method

In this work, we have investigated the potential of perfluoropolyether (PFPE) polymers for use in biomaterial applications, especially in cell culture and tissue engineering. PFPE substrates were synthesized by the photocuring of liquid PFPE urethane dimethacrylate. These surfaces were then modified by ECM protein coatings and microstructuration, to promote cell adhesion and migration. The surface properties of PFPE and PDMS (used as a reference) samples were studied by static contact angle measurements and AFM imaging. Both polymer surfaces were hydrophobic, having sessile air-water contact angles superior to 100°. Collagen and fibronectin coatings were found to change the wettability of PFPE and PDMS samples. The biological testing of substrates was done using a liver organotypic culture to evaluate the migration and density of liver cells. The results over seven days of culture demonstrated that the migration and density of cells cultured under untreated PFPE were higher than the migration and density of cells cultured under PDMS. ECM protein coatings enhanced cell migration from liver explants cultured on PFPE or PDMS. Furthermore, these coatings were more efficient in the case of a PFPE sample. From a second series of tests, in which the PFPE was microstructured, it was found that microstructures promoted the formation of a 3D cell layer. These results indicate that PFPE polymers have a potential for use in the development of biomaterials for tissue engineering and cell culture.

Controlling Cell Functions and Fate with Surfaces and Hydrogels: The Role of Material Features in Cell Adhesion and Signal Transduction

In their natural environment, cells are constantly exposed to a cohort of biochemical and biophysical signals that govern their functions and fate. Therefore, materials for biomedical applications, either in vivo or in vitro, should provide a replica of the complex patterns of biological signals. Thus, the development of a novel class of biomaterials requires, on the one side, the understanding of the dynamic interactions occurring at the interface of cells and materials; on the other, it requires the development of technologies able to integrate multiple signals precisely organized in time and space. A large body of studies aimed at investigating the mechanisms underpinning cell-material interactions is mostly based on 2D systems. While these have been instrumental in shaping our understanding of the recognition of and reaction to material stimuli, they lack the ability to capture central features of the natural cellular environment, such as dimensionality, remodelling and degradability. In this work, we review the fundamental traits of material signal sensing and cell response. We then present relevant technologies and materials that enable fabricating systems able to control various aspects of cell behavior, and we highlight potential differences that arise from 2D and 3D settings.

Theoretical and experimental study of the porous film using quartz crystal microbalance

The self-assembled multilayers have been studied by many researchers to modify the surfaces of artificial implants for increasing biocompatibility. The accurate mechanical properties of the film can only be obtained from the experimental results using appropriate theoretical models. As the film is composed of both solid polymers and fluid, this paper proposes a two-phase model. Based on the volume average method, the momentum equations are derived for both solid and liquid phases. In order to test our model, we built the porous film on the gold chip of the quartz crystal microbalance using the layer-by-layer method. The buildup process is based on the electrostatic interactions between anionic sodium hyaluronate and cationic chitosan by imitating the endothelial surface layer. By fitting our model to the experimental changes of the resonant frequency and dissipation factor, we get reasonable values of the film thickness, the porosity, the shear modulus of the solid phase, and the permeability. Compared with the existing models, the newly introduced permeability is an important property of the porous layer affecting the values of other parameters. Our model can provide more intrinsic properties of the self-assembled polymeric network and explain its interaction with the permeating fluid.