Synthesis, characterization, and acute oral toxicity evaluation of pH-sensitive hydrogel based on MPEG, poly(ε-caprolactone), and itaconic acid

RETRACTED: Khan et al. Poly (N-vinylcaprolactam-grafted-sodium alginate) Based Injectable pH/Thermo Responsive In Situ Forming Depot Hydrogels for Prolonged Controlled Anticancer Drug Delivery; In Vitro, In Vivo Characterization and Toxicity Evaluation. Pharmaceutics 2022, 14, 1050

The journal retracts the article, "Poly (N-vinylcaprolactam-grafted-sodium alginate) Based Injectable pH/Thermo Responsive In Situ Forming Depot Hy-drogels for Prolonged Controlled Anticancer Drug Delivery; In Vitro, In Vivo Characterization and Toxicity Evaluation" [...].

Synthesis of pH-Sensitive Cross-Linked Basil Seed Gum/Acrylic Acid Hydrogels by Free Radical Copolymerization Technique for Sustained Delivery of Captopril

The pH-sensitive polymeric matrix of basil seed gum (BSG), with two different monomers, such as acrylic acid (AA) and N, N-Methylene-bis-acrylamide (MBA), was selected to use in hydrogels preparation through a free radical copolymerization technique using potassium per sulfate (KPS) as a cross linker. BSG, AA and MBA were used in multiple ratios to investigate the polymer, monomer and initiator effects on swelling properties and release pattern of captopril. Characterization of formulated hydrogels was done by FTIR, DSC/TGA, XRD and SEM techniques to confirm the stability. The hydrogels were subjected to a variety of tests, including dynamic swelling investigations, drug loading, in vitro drug release, sol–gel analyses and rheological studies. FTIR analysis confirmed that after the polymeric reaction of BSG with the AA monomer, AA chains grafted onto the backbone of BSG. The SEM micrographs illustrated an irregular, rough, and porous form of surface. Gel content was increased by increasing the contents of polymeric gum (BSG) with monomers (AA and MBA). Acidic and basic pH effects highlighted the difference between the swelling properties with BSG and AA on increasing concentration. Kinetic modelling suggested that Korsmeyer Peppas model release pattern was followed by the drug with the non-Fickian diffusion mechanism.

In Vitro and Biological Characterization of Dexamethasone Sodium Phosphate Laden pH-Sensitive and Mucoadhesive Hydroxy Propyl β-Cyclodextrin-g-poly(acrylic acid)/Gelatin Semi-Interpenetrating Networks

The current study reports the fabrication and biological evaluation of hydroxy propyl β-cyclodextrin-g-poly(acrylic acid)/gelatin (HP-β-CD-g-poly(AA)/gelatin) semi-interpenetrating networks (semi-IPN) for colonic delivery of dexamethasone sodium phosphate (DSP). The prepared hydrogels showed pH-dependent swelling and mucoadhesive properties. The mucoadhesive strength of hydrogels increased with an increasing concentration of gelatin. Based on the swelling and mucoadhesive properties, AG-1 was chosen as the optimized formulation (0.33% w/w of gelatin and 16.66% w/w of AA) for further analysis. FTIR revealed the successful development of a polymeric network without any interaction with DSP. SEM images revealed a slightly rough surface after drug loading. Drug distribution at the molecular level was confirmed by XRD. In vitro drug release assay showed pH-dependent release, i.e., a minute amount of DSP was released at a pH of 1.2 while 90.58% was released over 72 h at pH 7.4. The optimized formulation did not show any toxic effects on a rabbit's vital organs and was also hemocompatible, thus confirming the biocompatible nature of the hydrogel. Conclusively, the prepared semi-IPN hydrogel possessed the necessary features, which can be exploited for the colonic delivery of DSP.

Prunus armeniaca Gum-Alginate Polymeric Microspheres to Enhance the Bioavailability of Tramadol Hydrochloride: Formulation and Evaluation

Combinations of polymers can improve the functional properties of microspheres to achieve desired therapeutic goals. Hence, the present study aimed to formulate Prunus armeniaca gum (PAG) and sodium alginate microsphere for sustained drug release. Blended and coated microspheres were prepared using the ionotropic gelation technique. The effect of polymer concentration variation was studied on the structural and functional properties of formulated microspheres. FTIR, XRD, and thermal analysis were performed to characterize the microspheres. All the formulations were well-formed spherical beads having an average diameter from 579.23 ± 07.09 to 657.67 ± 08.74 μm. Microspheres entrapped drugs within the range 65.86 ± 0.26–83.74 ± 0.79%. The pH-dependent swelling index of coated formulations was higher than blended. FTIR spectra confirmed the presence of characteristic peaks of entrapped Tramadol hydrochloride showing no drug-polymer interaction. In vitro drug release profile showed sustained release following the Korsmeyer-Peppas kinetic model with an R² value of 0.9803–0.9966. An acute toxicology study employing the oral route in Swiss albino mice showed no signs of toxicity. It can be inferred from these results that blending PAG with sodium alginate can enhance the stability of alginate microspheres and improve its drug release profile by prolonging the release time.

Orally Administered, Biodegradable and Biocompatible Hydroxypropyl–β–Cyclodextrin Grafted Poly (Methacrylic Acid) Hydrogel for pH Sensitive Sustained Anticancer Drug Delivery

In the current study, a pH sensitive intelligent hydroxypropyl–β–cyclodextrin-based polymeric network (HP-β-CD-g-MAA) was developed through a solution polymerization technique for site specific delivery of cytarabine in the colonic region. Prepared hydrogel formulations were characterized through cytarabine loading (%), ingredient’s compatibility, structural evaluation, thermal integrity, swelling pattern, release behavior and toxicological profiling in rabbits. Moreover, the pharmacokinetic profile of cytarabine was also determined in rabbits. New polymer formation was evident from FTIR findings. The percentage loaded into the hydrogels was in the range of 37.17–79.3%. Optimum swelling ratio of 44.56 was obtained at pH 7.4. Cytarabine release was persistent and in a controlled manner up to 24 h. In vitro degradation of hydrogels was more pronounced at intestinal pH as compared to acidic pH. Toxicity studies proved absence of any ocular, skin and oral toxicity, thus proving biocompatibility of the fabricated network. Hydrogels exhibited longer plasma half-life (8.75 h) and AUC (45.35 μg.h/mL) with respect to oral cytarabine solution. Thus, the developed hydrogel networks proved to be excellent and biocompatible cargo for prolonged and site-specific delivery of cytarabine in the management of colon cancer.

Fabrication, Characterization and Toxicity Evaluation of Chemically Cross linked Polymeric Network for Sustained Delivery of Metoprolol Tartrate

Natural mucilages are auspicious biodegradable polymeric materials. The aim of the present research work was to elucidate the characteristics of quince mucilage-based polymeric network for sustained delivery of metprolol tartrate and its toxicity evaluation. Mucilage was extracted by hot water extraction, and characterization of quince mucilage was accomplished by using Fourier transform infrared (FTIR) spectroscopy. Different batches of quince mucilage polymeric network were prepared by free radical polymerization by utilizing varying ratios of quince mucilage, acrylamide and crosslinker. Degree of swelling depends on concentration of mucilage, monomer and also on crosslinking density of polymeric network. FTIR illustrates proficient grafting, and morphological (scanning electron microscopy) analysis signified porous design. Hence, quince mucilage-based design was encouraging for sustained delivery of metprolol tartrate and acute toxicity evaluation proved that mucilage-based network was safe for oral drug delivery system.

β-cyclodextrin chitosan-based hydrogels with tunable pH-responsive properties for controlled release of acyclovir: design, characterization, safety, and pharmacokinetic evaluation

In this work, series of pH-responsive hydrogels (FMA1-FMA9) were synthesized, characterized, and evaluated as potential carrier for oral delivery of an antiviral drug, acyclovir (ACV). Different proportions of β-cyclodextrin (β-CD), chitosan (CS), methacrylic acid (MAA) and N' N'-methylenebis-acrylamide (MBA) were used to fabricate hydrogels via free radical polymerization technique. Fourier transform infrared spectroscopy confirmed fabrication of new polymeric network, with successful incorporation of ACV. Scanning electron microscopy (SEM) indicated presence of slightly porous structure. Thermal analysis indicated enhanced thermal stability of polymeric network. Swelling studies were carried out at 37 °C in simulated gastric and intestinal fluids. The drug release data was found best fit to zero-order kinetics. The preliminary investigation of developed hydrogels showed a pH-dependent swelling behavior and drug release pattern. Acute oral toxicity study indicated no significant changes in behavioral, clinical, or histopathological parameters of Wistar rats. Pharmacokinetic study indicated that developed hydrogels caused a significant increase in oral bioavailability of ACV in rabbit plasma as compared to oral suspension when both were administered at a single oral dose of 20 mg kg-1 bodyweight. Hence, developed hydrogel formulation could be used as potential candidate for controlled drug delivery of an antiviral drug acyclovir.

Formulation, In Vitro Evaluation, and Toxicity Studies of A. vulgaris-co-AAm Carrier for Vildagliptin

This study investigated the use of Artemisia vulgaris L. seed mucilage as a new excipient for sustained delivery of Vildagliptin. Copolymeric carrier of A. vulgaris seed mucilage-co-AAm was devised by using acrylamide (AAm) as a monomer, methylene-bis-acrylamide (MBA) as a crosslinker, and potassium persulfate (KPS) as an initiator through free radical polymerization. Different formulations of A. vulgaris-co-AAm were devised by varying contents of polymer, monomer, crosslinking agent, initiator, and reaction temperature. Copolymeric structures were characterized through XRD analysis, Fourier transform infrared (FTIR) spectroscopy, TGA and DSC analysis, and scanning electron microscopy. Porosity, gel fraction, and Vildagliptin loading capacity of copolymers were also established. Swelling and in vitro drug release studies were conducted. XRD evaluation showed the alteration of the crystalline structure of Vildagliptin into an amorphous form. FTIR analysis confirmed the successful grafting of AAm to A. vulgaris seed mucilage backbone. Porosity was increased with increasing polymer concentration and reaction temperature while it was decreased with an increasing amount of AAm, MBA, and KPS. Gel content was decreased with increasing polymer concentration and reaction temperature while it was increased with an increasing amount of AAm, MBA, and KPS. Acute oral toxicity of copolymeric network was done in animal models to evaluate the safety. Copolymers showed the same swelling behavior at all pH 1.2, 4.5, 6.8, and 7.4. Vildagliptin release from copolymer showed a cumulative trend by increasing polymer content and reaction temperature, while a declining trend was observed with increasing contents of monomer, crosslinking agent, and initiator. Sustained release of Vildagliptin was observed from copolymers and release followed the Korsmeyer-Peppas model. From the acute oral toxicity studies, it is evident that newly synthesized copolymeric carriers are potentially safe for eyes, skin, and vital organs.

Hydrogels as Drug Delivery Systems: A Review of Current Characterization and Evaluation Techniques

Owing to their tunable properties, controllable degradation, and ability to protect labile drugs, hydrogels are increasingly investigated as local drug delivery systems. However, a lack of standardized methodologies used to characterize and evaluate drug release poses significant difficulties when comparing findings from different investigations, preventing an accurate assessment of systems. Here, we review the commonly used analytical techniques for drug detection and quantification from hydrogel delivery systems. The experimental conditions of drug release in saline solutions and their impact are discussed, along with the main mathematical and statistical approaches to characterize drug release profiles. We also review methods to determine drug diffusion coefficients and in vitro and in vivo models used to assess drug release and efficacy with the goal to provide guidelines and harmonized practices when investigating novel hydrogel drug delivery systems.

Novel amino-β-Cyclodextrins containing polymers: Fabrication, characterization, and biological evaluation

In this study, poly (mPEGMA-co-MAA) (PA) based on monomers of mPEGMA and MAA were synthesized, and different amino-β-Cyclodextrins with various alkyl chains were conjugated to PA through carbodiimide-mediated coupling reactions. The obtained poly (mPEGMA-co-MAA-g-amino-β-CD) (PA-g-amino-β-CD) was characterized by FTIR, NMR and TGA. The fluorescence technique was used to investigate the micellization of PA-g-amino-β-CDs. The results indicated that these polymers could self-assemble into nano-micelles in water, and PA-g-HDA-β-CD possessed the lowest CMC value due to its long alkyl chains. In addition, the PA-g-HDA-β-CD micelles were in spherical shapes with the diameter of 78.5 ± 0.6 nm.The release of the model drug from PA-g-HDA-β-CD micelles was increased as the pH reduced from 7.4-5.5 at 37 °C. Cytotoxicity and cellular uptake experiments were performed in HepG2, which showed that the cargo-free PA-g-HDA-β-CD micelles did not have obvious cytotoxicity and were mainly distributed in the cytoplasm of HepG2 cells by endocytosis. Moreover, the study about in vivo distribution of the experimental rats indicated that the accumulation of PA-g-HDA-β-CD micelles mainly happened in the liver. Therefore, the novel amino-β-CD containing polymers exhibit good potential applications in drug delivery system.

Importance of Polyacrylamide Hydrogel Diverse Chains and Cross-Linking Density for Cell Proliferation, Aging, and Death

Diverse chains and cross-linking density of polymers are important for cell proliferation, aging, and death. In this study, by controlling the component ratio of N,N'-methylenebisacrylamide (Bis)/acrylamide (Acr), we prepared polyacrylamide (PAM) hydrogels with three different polymer structures using ultraviolet irradiation. Moreover, we quantified their Flory's cross-linking densities, gel concentrations, and mechanical properties and evaluated their influence to HL-7702 liver cell behavior and metabolism. Results showed that PAM hydrogel at a ratio of Bis/Acr = 1:50 (Acr-50) owned the highest cross-linking density (0.04), which provided abundant binding sites for cell adhesion and allowed for rapid cell proliferation. On the basis of the binding sites, cells had strong traction interaction from fibrillate adhesion with the polymers, allowed easy cell migration, and induced the living cell aggregations with a diameter of 800 μm. Cells in aggregation exhibited healthy cell phenotypes and functions, and also the mitosis of the cells in aggregation is exactly the same with the cells in tissue. It is concluded that cell proliferation, aging, and death can be controlled by adjusting the cross-linking density and diverse chains of matrix hydrogels. This work will be helpful to design new functional soft biomaterials for tissue regeneration in the future.

Hydrogels Based Drug Delivery Synthesis, Characterization and Administration

Hydrogels represent 3D polymeric networks specially designed for various medical applications. Due to their porous structure, they are able to swollen and to entrap large amounts of therapeutic agents and other molecules. In addition, their biocompatibility and biodegradability properties, together with a controlled release profile, make hydrogels a potential drug delivery system. In vivo studies have demonstrated their effectiveness as curing platforms for various diseases and affections. In addition, the results of the clinical trials are very encouraging and promising for the use of hydrogels as future target therapy strategies.

Investigation on Au-nano incorporated pH-sensitive (itaconic acid/acrylic acid/triethylene glycol) based polymeric biocompatible hydrogels

The pH-sensitive gold nano hydrogel based on itaconic acid, acrylic acid and triethylene glycol (GIAT) has been prepared by free radical polymerization viz. organic solventless approach with different monomer ratios. The nature of bonding and structural identification of GIAT hydrogels were characterized by FT-IR spectroscopy. The surface morphology of gold gel was examined using scanning electron microscopy (SEM). In addition, transmission electron microscopy (TEM) was used to identify the size of gold nano particles. The in vitro biocompatibility of GIAT hydrogel has been evaluated in 3T3 fibroblast cell lines. The obtained results show that gold nano particle incorporated hydrogel possess ~99% of cell proliferation. Followed by, the impact of gold nano particles on swelling, surface morphology was studied. The consecutive preparation of hydrogel, effect of different pH conditions, and stoichiometry of monomeric units have also been discussed. The degree of swelling was measured in carbonate buffer solutions for 24h period with varying pH such as 1.2, 6.0, 7.4 and 10.0. The obtained results showed that the stoichiometry of itaconic acid and gold nano particles plays an essential role in modifying the nature of GIAT polymeric hydrogels. In conclusion, promising Au-nano incorporated pH-sensitive bio polymeric hydrogels were prepared and characterized. The unique properties of these Au-nano hydrogel make them attractive use in biomedical applications.