Preliminary Deformational Studies on a Finite Element Model of the Nasal Septum Reveals Key Areas for Septal Realignment and Reconstruction

Investigation on Filaments for 3D Printing of Nasal Septum Cartilage Implant

Septoplasty is a widely used method in treating deviated septum. Although it is successfully implemented, there are problems with excessive bleeding, septal perforation, or infections. The use of anatomically shaped implants could help overcome these problems. This paper focuses on assessing the possibility of the usage of a nasal septum cartilage implant 3D printed from various market-available filaments. Five different types of laments were used, two of which claim to be suitable for medical use. A combination of modeling, mechanical (bending, compression), structural (FTIR), thermal (DSC, MFR), surface (contact angle), microscopic (optical), degradation (2 M HCl, 5 M NaOH, and 0.01 M PBS), printability, and cell viability (MTT) analyses allowed us to assess the suitability of materials for manufacturing implants. Bioflex had the most applicable properties among the tested materials, but despite the overall good performance, cell viability studies showed toxicity of the material in MTT test. The results of the study show that selected filaments were not suitable for nasal cartilage implants. The poor cell viability of Bioflex could be improved by surface modification. Further research on biocompatible elastic materials for 3D printing is needed either by the synthesis of new materials or by modifying existing ones.

Trilayer temporalis fascia interposition graft: A reliable technique for nasal septal perforation repair

PURPOSE

Nasal septal perforation (NSP) repair is a complex procedure with variable techniques and success rates. In this study we describe NSP repair using a trilayer interposition graft of temporalis fascia and thin polydioxanone (PDS) plate without intranasal flaps and report outcomes in our patient population.

MATERIALS AND METHODS

IRB-approved retrospective review of 20 consecutive patients presenting to a tertiary medical center with NSP from September 2018 to December 2020 and who underwent NSP repair via our trilayer temporalis fascia interposition graft. De-identified patient data was obtained from the medical record and stored on an encrypted secure server. Descriptive statistics were examined for each variable.

RESULTS

All 20 NSP repairs demonstrated durable repair with complete mucosal coverage at last follow-up (average 7 months). Complete resolution of preoperative symptoms was achieved in 85 % of patients, with partial resolution in the remaining 15 %. Of the 20 perforations 25 % were small (<1 cm), 50 % medium (1-2 cm), and 25 % large (>2 cm). The only surgical complication was a single intranasal synechiae. No graft harvest site complications were noted.

CONCLUSION

The application of a trilayer temporalis fascia - PDS plate interposition graft without intranasal flaps is highly effective for repair of NSP.

Computational technology for nasal cartilage-related clinical research and application

Surgeons need to understand the effects of the nasal cartilage on facial morphology, the function of both soft tissues and hard tissues and nasal function when performing nasal surgery. In nasal cartilage-related surgery, the main goals for clinical research should include clarification of surgical goals, rationalization of surgical methods, precision and personalization of surgical design and preparation and improved convenience of doctor-patient communication. Computational technology has become an effective way to achieve these goals. Advances in three-dimensional (3D) imaging technology will promote nasal cartilage-related applications, including research on computational modelling technology, computational simulation technology, virtual surgery planning and 3D printing technology. These technologies are destined to revolutionize nasal surgery further. In this review, we summarize the advantages, latest findings and application progress of various computational technologies used in clinical nasal cartilage-related work and research. The application prospects of each technique are also discussed.

A FEA-Based Methodology to Predict the Osteotome Wear Status during Nasal Bone Surgical Operations

A FEA-based methodology was developed in order to predict the wear status of an osteotome (surgical instrument) during its use in a lateral nasal bone osteotomy considering its fatigue strength. The latter parameter was determined by appropriate FEM-evaluation of the perpendicular impact test results. For the simulation of the surgical procedure, two scenarios were examined: (i) when utilizing a brand new osteotome and (ii) when utilizing an already used osteotome characterized by decreased fatigue strength. The actual nasal bone geometry used in the FEA model was obtained from a high-resolution, maxillofacial, computed tomography (CT) scan of a single patient. In both cases examined, depiction of fracture patterns for the osteotome and the nasal bone were obtained. The wear of a new osteotome and an already used osteotome was also calculated and compared. The developed von Mises stresses in both the osteotome and nasal bone were depicted. The proposed methodology allowed an accurate prediction of the critical number of impacts that the osteotome can receive during the lateral nasal osteotomy which is followed in all rhinoplasties. Based on the developed methodology, a preventive replacement of the osteotome before its extensive fracture can be determined, thereby minimizing the risk of postoperative complications.

Recapitulation of Unilateral Cleft Lip Nasal Deformity on Normal Nasal Structure: A Finite Element Model Analysis

Cleft lip nasal deformity has been challenging to plastic surgeons. A better understanding of the biomechanical aspect of the cleft nose would contribute to a better correction. In this study, finite element model of a normal nose was constructed and loaded with forces to recapitulate the unilateral cleft lip nasal deformity. Tether at the alar base was simulated by a laterally directed force at the lateral crus, and tether at the columella base by a posteriorly directed force at the medial crus. The equivalent von-Mises stress and the total deformation consequent to different patterns of loading were captured. In accordance with clinical observations, unilaterally loaded forces caused deformation on both sides of the nose. A correlation between the patterns of loading and different cleft lip nasal deformities was documented in detail. When set at the same force magnitude, tether at the columella base led to more extensive changes in the nasal morphology and higher level of stress than at the alar base. Clear identification of major pathological tethers in the nasolabial region might lead to more accurate and stable correction of cleft lip nasal deformities.

Biomechanical simulation of correcting primary unilateral cleft lip nasal deformity

For better outcomes of the primary correction of cleft lip nasal deformity, it is important to clarify the specific morphological and biomechanical consequences of major surgical maneuvers during cleft lip nose correction. In this study, a finite element model was established basing on the micro-MRI imaging of an infant specimen with unilateral complete cleft lip deformity. Alar base adduction was simulated as a medially-directed force on the lateral crus (F1); columella straightening was simulated as a laterally-directed force on the medial crus (F2); and nasal tip enhancement was simulated as an anteriorly-directed force on the intermediate crus (F3). The deformation and stress distribution consequent to each force vector or different force combinations were analyzed in details. Our biomechnical analyses suggested that W\when loaded alone, the three forces generated disparate morphological changes. The combination of different force loadings generated obviously different outcomes. F3 generated the most intensive stress when compared to F1 and F2. When F2 was loaded on top of F1-F3 combination, it further relieved nasal deviation without incurring significant increase in stress. Our simulation suggested that alar base adduction, columella straightening, and nasal tip elevation should all be included in a competent cleft lip nose correction.

Mechanical analyses of critical surgical maneuvers in the correction of cleft lip nasal deformity

The relapse of nasal deformity is a challenge for modern correction of cleft lip. A comprehensive understanding in the biomechanical perspective of both the formation and correction of the cleft lip nasal deformity would lead to improved stability of the corrective outcome. In this study, a finite element model of secondary cleft lip nasal deformity was constructed, on which two critical corrective maneuvers were mimicked in the form of force-loading. The intercrural suture was simulated by a force loaded at the intermediate crus of the alar cartilage directing anteriorly and medially, and the suture suspending the alar cartilage to the upper lateral cartilage was simulated by a force loaded at the lateral crus directing superiorly and medially. The equivalent von-mises stress and the total deformation consequent to different patterns of loading were captured. Our biomechanical analyses suggested that the intercrural suture at the nasal tip might be more effective in generating widespread morphological change than the suspension suture, but left much higher level of stress within the skin envelope if placed too high. Synergistic effect was observed between the two sutures in both the resultant deformation and stress. In addition, our simulations were partially supported by clinical photogrammetry data.

Redefining the Septal L-Strut to Prevent Collapse

During septorhinoplasty, septal cartilage is frequently resected for various purposes but the L-strut is preserved. Numerous materials are inserted into the nasal dorsum during dorsal augmenation rhinoplasty without considering nasal structural safety. This study used a finite element method (FEM) to redefine the septal L-strut, to prevent collapse as pressure moved from the rhinion to the supratip breakpoint on the nasal dorsum and as the contact percentage between the caudal L-strut and the maxillary crest changed. We designed a 1-cm-wide L-strut model based on computed tomography data. At least 45% of the width of the L-strut in the inferior portion of the caudal strut must be preserved during septoplasty to stabilize the septum. In augmentation rhinoplasty, the caudal L-strut must either be preserved perfectly or reinforced to prevent collapse or distortion of the L-strut. The dorsal augmentation material must be fixed in an augmentation pocket to prevent movement of graft material toward the supratip breakpoint, which can disrupt the L-strut. We conducted a numerical analysis using a FEM to predict tissue/organ behavior and to help clinicians understand the reasons for target tissue/organ collapse and deformation.