Exopolymeric substances production by Bacillus cereus KMS3-1 enhanced its biosorption efficiency in removing Cd2+ and Pb2+ in single and binary metal mixtures

The present study investigated the growth, exopolymeric substance (EPS) production, and biosorption efficiency of strain Bacillus cereus KMS3-1 in the Cd²⁺ and Pb²⁺ ions containing single and binary metal-treated broth (50 mg/L). In addition, the interaction of the KMS3-1 strain with Cd²⁺ and Pb²⁺ ions in single and binary metal-treated broths was investigated using SEM-EDS, FTIR, and XRD analyses. The results showed that the biosorption efficiency (%) and EPS production of KMS3-1 biomass in both single and binary metal-treated broths had increased with increasing incubation time and were higher for Pb²⁺ ions than for Cd²⁺ ions. In the single and binary metal-treated broths, the maximum biosorption efficiency of KMS3-1 for Pb²⁺ ions were 70.8% and 46.3%, respectively, while for Cd²⁺ ions, they were 29.3% and 16.8%, respectively, after 72 h. Moreover, the biosorption efficiency of strain KMS3-1 for both metal ions was dependent on its EPS production and peaked at the maximum EPS production. The copious EPS production by KMS3-1 was observed in metal-treated media (50 mg/L), in the following order: Pb²⁺ ions (1925.7 μg/mL) > binary metal mixtures (1286.8 μg/mL) > Cd²⁺ ions (1185.5 μg/mL), > control (1099 μg/mL) after 72 h of incubation. This result indicates that the metal biosorption efficiency of the KMS3-1 strain was enhanced by the increased EPS production in the surrounding metal-treated broth. SEM-EDS and FTIR characterization studies revealed that the KMS3-1 biomass effectively adsorbed Cd²⁺ and Pb²⁺ ions from the medium by interacting with their surface functional groups (hydroxyl, carbonyl, carboxyl, amide, and phosphate). Moreover, the biosorbed Cd²⁺ and Pb²⁺ ions were transformed into CdS and PbS, respectively, by the KMS3-1 biomass. This study suggests that the Bacillus cereus KMS3-1 strain may be a promising candidate for the treatment of metal contamination.

Exopolysaccharide production from Alkalibacillus sp. w3: statistical optimization and biological activity

Microbial exopolysaccharides (EPS) provide a broad range of applications. Thus, there is an increasing interest in the production, characterization, and use of EPS derived from various microorganisms. Extremophile polysaccharides have unique properties and applications due to its unique structures. The importance of exopolysaccharides synthesized by a new bacterial strain, Alkalibacillus sp. w3, was highlighted in this study. Alkalibacillus sp. w3, a haloalkalitolerant firmicute that was recovered from a salt lake, was optimized for EPS production, and its biological activities were studied. Exopolysaccharide synthesis was observed in Horikoshi I broth medium. The optimal culture conditions for achieving the highest exopolysaccharide production were a 7-day incubation period, pH 10, and 250 g/L of NaCl. The most effective carbon and nitrogen sources for EPS production were glucose and a combination of yeast extract and peptone. Additionally, Plackett-statistical Burman’s design showed that all factors tested had a favorable impact, with glucose having the greatest significance on the production of EPS. The model’s best predictions for culture conditions resulted in a two-fold improvement in EPS production compared to the original yield before optimization. The recovered EPS contained 65.13% carbohydrates, 30.89% proteins, and 3.98% lipids. Moreover, EPS produced by Alkalibacillus sp. w3 demonstrated anticancer activity against hepatocellular carcinoma (HepG2) and human colon carcinoma (HCT-116) cell lines, with IC50 values as low as 11.8 and 15.5 µg/mL, respectively, besides antibacterial activity against various Gram-positive, Gram-negative bacteria, and yeast. Based on these results, EPS made by Alkalibacillus sp. w3 has many useful properties, which make it suitable for use in the medical field.

Real-Time 3D Framework Tracing of Extracellular Polymeric Substances by an AIE-Active Nanoprobe

Extracellular polymeric substances (EPS) are produced by many microorganisms and play an essential role in physiological systems such as nutrient storage and stress resistance. Besides, EPS show great potential in biomedical and therapeutic applications due to their biocompatibility and biodegradability. In situ noninvasive monitoring of the EPS produced by microorganisms is thus critical but has not yet been achieved. Herein, we developed a novel aggregation-induced emission (AIE) active nanoprobe enabling in situ visualization of the EPS distribution produced by various microorganisms (cyanobacteria, yeast, freshwater, and marine phytoplankton). The synthesized AIE-active nanoprobe displayed excellent specificity and precision for the staining of EPS, as well as strong photostability, showing great advantage in sensing the EPS in living organisms. With the application of this novel probe, the three-dimensional (3D) framework of EPS distribution was visualized under different environmental conditions (temperature, light intensity, nutrition, and pH). The EPS distribution was found to correlate significantly with the metal tolerance and cyanobacterial photosynthesis capability. Collectively, this study proposed an AIE-active nanoprobe for visualizing the EPS distribution and quantifying the EPS thickness/volume, and has significant implications in understanding the physiological functions of microorganisms.

Optimization of Exopolysaccharide (EPS) Production by Rhodotorula mucilaginosa sp. GUMS16

Exopolysaccharides (EPSs) are important biopolymers with diverse applications such as gelling compounds in food and cosmetic industries and as bio-flocculants in pollution remediation and bioplastics production. This research focuses on enhancing crude EPS production from Rhodotorula mucilaginosa sp. GUMS16 using the central composite design method in which five levels of process variables of sucrose, pH, and ammonium sulfate were investigated with sucrose and ammonium sulfate serving as carbon and nitrogen sources during microbial incubation. The optimal crude EPS production of 13.48 g/100 mL was achieved at 1 g/100 mL of sucrose concentration, 14.73 g/100 mL of ammonium sulfate at pH 5. Variations in ammonium sulfate concentrations (1.27–14.73 g/100 mL) presented the most significant effects on the crude EPS yield, while changes in sucrose concentrations (1–5 g/100 mL) constituted the least important process variable influencing the EPS yield. The Rhodotorula mucilaginosa sp. GUMS16 may have the potential for large-scale production of EPS for food and biomedical applications.

Microalgae biofilm cultured in nutrient-rich water as a tool for the phycoremediation of petroleum-contaminated water

This study aimed at studying the phycoremediation of petroleum-contaminated water using microalgae biofilm cultured in nutrient-rich water. Microalgae biofilm was grown in a photobioreactor containing water rich in calcium nitrate, manganese chloride, sodium potassium tartrate, calcium phosphate, and ammonium sulfate. Petroleum contaminated water was poured into a photobioreactor, and the substrate containing microalgae biofilm was inserted into the photobioreactor and allowed for eight weeks for biofilm formation. Physicochemical parameters (pH, turbidity, conductivity, sulfate, alkalinity, chloride, TDS, TSS, nitrate, salinity, iron, potassium, phosphate, chlorine, chromium, magnesium, zinc, COD, BOD, and total petroleum hydrocarbon (TPH) of the petroleum contaminated water before and after treatment were determined. The microalgae biofilm used for the treatment was characterized before and after treatment using a Scanning Electron Microscope, X-Ray Fluorescence, and Fourier-transform infrared spectroscopy. The phytochemical constituent of the microalgae biofilm was also determined before and after treatment of the petroleum-contaminated water. The result obtained shows highest removal efficiency of physicochemical parameters (turbidity (81%), conductivity (51.2), sulfate (17.5%), alkalinity 28.4%), chloride (14.6%), TDS (7.9), TSS (26%), nitrate (33%), salinity (23.4), iron (16%), potassium (22%), phosphate (28.2%), chlorine (14%), chromium (13.6%), magnesium (30.3%), zinc (40.5%), COD (8%), BOD (16.7%) and total petroleum hydrocarbon (15%)). The microalgae's characterization shows microalgae biofilm's ability to adsorb pollutants in petroleum-contaminated water due to the presence of microspores and larger surface area of the cells of the microalgae forming the biofilm or due to the absorption efficiency of the extracellular polymeric substances (EPS). The analysis of the microalgae biofilm's phytochemical parameters shows the involvement of the chemicals components in pollutants degradation and antioxidant response of the microalgae to counteract the oxidative effect resulting from the exposure of the microalgae to the contaminated water. NOVELTY STATEMENT This is the first study that attempts the phycoremediation of petroleum contaminated water using microalgae biofilm. The reduction efficiency of the parameters treated in this study is very low compared to that reported in the literature but increases with the retention day. This low reduction efficiency is attributed to the slow assimilation of organic and inorganic pollutants due to the initial growth condition. This study is the first to re-affirm that microalgae biofilm can phycoremediate petroleum-contaminated water by adsorption and assimilation due to the presence of microspores and a larger surface area the cells of the microalgae forming the biofilm or the extracellular polymetric surface covering the biofilm. Several studies have reported that phytochemicals present in microalgae play an antioxidant response role to prevent the microalgae from oxidative damage resulting from water pollution. However, this study is the first to strongly link phytochemicals to the enhancement of pollutants degradation and adsorption by microalgae biofilm.

Production and functionality of exopolysaccharides in bacteria exposed to a toxic metal environment

In this study, the production and compositional analysis of exopolysaccharides produced by Bacillus cereus KMS3-1 grown in metal amended conditions were investigated. In addition, the metal adsorption efficacy of exopolysaccharides (EPS) produced by KMS3-1 strain was evaluated in a batch mode. Increased production of exopolysaccharides by KMS3-1 strain was observed while growing under metal amended conditions (100 mg/L) and also, the yield was in the order of Pb(II)>Cu(II)>Cd(II)>Control. Characterization of EPS using FT-IR, XRD, and SEM analysis revealed that the EPS can interact with metal ions through their functional groups (O‒H, CH, C˭O, C‒O, and C‒C˭O) and assist the detoxification process. Further, equilibrium results were fitted with the Langmuir model and notably, the maximum adsorption capacity (Q_max) of EPS for Cd(II), Cu(II), and Pb(II) found to be 54.05, 71.42, and 78.74 mg/g, respectively. To the best of our knowledge, EPS demonstrating proficient metal adsorption was substantiated by XRD analysis in this study. Owing to good adsorbing nature, the exopolysaccharides could be used as chelating substances for wastewater treatment.

Influence of surface copper content on Stenotrophomonas maltophilia biofilm control using chlorine and mechanical stress

This work aimed to evaluate the action of materials with different copper content (0, 57, 96 and 100%) on biofilm formation and control by chlorination and mechanical stress. Stenotrophomonas maltophilia isolated from drinking water was used as a model microorganism and biofilms were developed in a rotating cylinder reactor using realism-based shear stress conditions. Biofilms were characterized phenotypically and exposed to three control strategies: 10 mg l^-1 of free chlorine for 10 min, an increased shear stress (a fluid velocity of 1.5 m s^-1 for 30s), and a combination of both treatments. These shock treatments were not effective in biofilm control. The benefits from the use of copper surfaces was found essentially in reducing the numbers of non-damaged cells. Copper materials demonstrated better performance in biofilm prevention than chlorine. In general, copper alloys may have a positive public health impact by reducing the number of non-damaged cells in the water delivered after chlorine exposure.

Inhibition of Wild Enterobacter cloacae Biofilm Formation by Nanostructured Graphene- and Hexagonal Boron Nitride-Coated Surfaces

Although biofilm formation is a very effective mechanism to sustain bacterial life, it is detrimental in medical and industrial sectors. Current strategies to control biofilm proliferation are typically based on biocides, which exhibit a negative environmental impact. In the search for environmentally friendly solutions, nanotechnology opens the possibility to control the interaction between biological systems and colonized surfaces by introducing nanostructured coatings that have the potential to affect bacterial adhesion by modifying surface properties at the same scale. In this work, we present a study on the performance of graphene and hexagonal boron nitride coatings (h-BN) to reduce biofilm formation. In contraposition to planktonic state, we focused on evaluating the efficiency of graphene and h-BN at the irreversible stage of biofilm formation, where most of the biocide solutions have a poor performance. A wild Enterobacter cloacae strain was isolated, from fouling found in a natural environment, and used in these experiments. According to our results, graphene and h-BN coatings modify surface energy and electrostatic interactions with biological systems. This nanoscale modification determines a significant reduction in biofilm formation at its irreversible stage. No bactericidal effects were found, suggesting both coatings offer a biocompatible solution for biofilm and fouling control in a wide range of applications.

VRT, Kodali VP. Emulsifying activity of a biosurfactant produced by a marine bacterium

Biosurfactants produced by biofilm-forming bacteria have great applications in biotechnology, pharmaceutical, food engineering, bioremediation, and biohydrometallurgy industries. This study aimed to find out the bacteria that produce novel exopolymers (EPSs) which can find potential role in oil biodegradation. A screening procedure was performed to detect EPS-producing bacteria. The EPS producing isolate was identified as Acinetobacter species by 16S rDNA analysis. The polymer produced by the isolate has shown significant emulsification and surfactant activities, and the activities were compared to some of the commercial emulsifiers. The EPS has been partially characterized by FTIR analysis and has been proved to be a glycolipoprotein. This is one of the very few reports on Acinetobacter species producing EPS with surfactant properties.