Deletion of pyoverdine-producing pvdA increases cadmium stabilization by Pseudomonas umsongensis CR14 in cadmium-polluted solutions

In this study, the effects of the Cd-resistant and pyoverdine-producing strain Pseudomonas umsongensis CR14 on Cd stabilization and the mechanisms were investigated. Compared with the control, CR14 markedly reduced the Cd concentration in a Cd-containing solution. The genes pvdA, 4498, 4499, and pchF, which are associated with pyoverdine production, were identified in CR14. Subsequently, CR14 and the CR14ΔpvdA, CR14Δ4498, CR14Δ4499, and CR14ΔpchF mutants were characterized for their effects on Cd stabilization in solution. After 72 h of incubation, the CR14ΔpchF and CR14ΔpvdA mutants significantly decreased Cd concentrations compared with CR14. Notably, the CR14ΔpvdA mutant showed a greater impact on Cd stabilization than the other mutants. Compared with CR14, this mutant brought a lower Cd concentration in the solution, with higher levels of cell surface-adsorbed and intracellular accumulated Cd, content of lipopolysaccharide (LPS), expression of the LPS-producing genes lptD and lpxL, and cell surface particles. Additionally, compared with CR14, the CR14ΔpvdA mutant demonstrated increased interactions between the hydroxyl, carboxyl, amino, or ether groups and Cd. These results suggest that the CR14ΔpvdA mutant immobilized Cd by increasing LPS production and cell surface particle numbers, upregulating the expression of LPS-producing genes, and increasing cell surface adsorption and intracellular accumulation in Cd-polluted solutions.

FeONPs alleviate cadmium toxicity in Solanum melongena through improved morpho-anatomical and physiological attributes, along with oxidative stress and antioxidant defense regulations

In this study, various constraints of Cd toxicity on growth, morpho-anatomical characters along with physiological and biochemical metabolic processes of Solanum melongena L. plants were analyzed. Conversely, ameliorative role of iron oxide nanoparticles (FeONPs) was examined against Cd stress. For this purpose, the following treatments were applied in completely randomized fashion; 3 mM CdCl2 solution applied with irrigation water, 40 and 80 ppm solutions of FeONPs applied via foliar spray. Regarding the results, Cd caused oxidative damage to plants' photosynthetic machinery, resulting in elevated levels of stress-markers like malondialdehyde (MDA), hydrogen peroxide (H2O2), and electrolytic leakage (EL) along with slight increase in antioxidants activities, including glutathione (GsH), ascorbate (AsA), catalases (CAT), peroxidases (POD), superoxide dismutase (SOD), and ascorbate peroxidases (APX). Also, high Cd level in plants disturb ions homeostasis and reduced essential minerals uptake, including Ca and K. This ultimately reduced growth and development of S. melongena plants. In contrast, FeONPs supplementations improved antioxidants (enzymatic and non-enzymatic) defenses which in turn limited ROS generation and lowered the oxidative damage to photosynthetic machinery. Furthermore, it maintained ionic balance resulting in enhanced uptake of Ca and K nutrients which are necessary for photosynthesis, hence also improved photosynthesis rate of S. melongena plants. Overall, FeONPs foliar spray effectively mitigated Cd toxicity imposed on S. melongena plants.

Occurrence of antibiotics and antibiotic-resistant bacteria in the Lebanese polluted Litani River

Antibiotic contamination in polluted rivers is well recognized as an environmental and public health challenge. In this study, the occurrence, distribution, and ecological risk assessment of three commonly used antibiotics (amoxicillin, ciprofloxacin, and azithromycin) were assessed in the Litani River, the most important and highly polluted river in Lebanon. Physicochemical and microbiological water quality parameters including the antibiotic-resistant ones were in parallel determined in the same sites. Water samples from five sites stretching across the river upper basin were analyzed for the antibiotics under study using high-performance liquid chromatography, with both fluorometric and UV detectors post-extraction using a solid-phase method with a hydrophilic-lipophilic balance cartridges. The disc diffusion method and standardized water quality methods were used for antibiotic-resistant bacteria and water quality assessment, respectively. Amoxicillin and ciprofloxacin were found at concentrations of 250 ng/L and 107.2 ng/L, while azithromycin was not detected in any of the sites under study. Varying levels of antibiotic resistance were detected with the isolated Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa) while the total coliforms showed resistance to multiple antibiotics. COD, TP, PO43-, TN, NO3-, NH4 + , E. coli, total coliform, P. aeruginosa, and Cd levels surpassed permissible levels. Correlation analysis with water quality parameters (COD, total phosphate, phosphate, total nitrogen, and cadmium) showed a significant positive correlation with ciprofloxacin (r > 0.5, p value < 0.05). Also, the resistant P. aeruginosa showed a significant positive correlation with cadmium (r > 0.5, p value < 0.05) while the resistant E. coli was positively correlated with total nitrogen, nitrate, and lead levels (r > 0.5, p value < 0.05). The ecological risk assessment revealed that all the tested antibiotics pose low risks (ecological risk quotient RQ < 0.1) except ciprofloxacin, which could pose a medium risk (0.1 < RQ < 1). Future research concerning the long-term assessment of antibiotics' residues and the identification of resistance genes in the river is recommended.

Synthesis of water-soluble CdS quantum dots for the fluorescence detection of tetracycline

An effective strategy for combating antibiotic-resistant bacteria (ARB) entails the early detection of antibiotics during the initial stages of water treatment facilities. In this context, cadmium sulfide quantum dots (CdS QDs) were employed for the precise detection of tetracycline (TET), an emerging contaminant, in water. CdS QDs with fluorescence properties were synthesized by culturing Citrobacter freundii bacteria. The CdS QDs were characterized by spectroscopy techniques, and the quantum efficiency was estimated to be 55.8% which is ∼2-fold high compared to the standard rhodamine-B solution. The fluorescence of CdS QDs was quenched at 440 nm in the presence of TET. The linear range of TET was varied from 10 to 100 μM with a lower limit of detection of ∼23 nM. The CdS QDs were used to detect TET in river water, tap water, and milk which showed an excellent recovery rate. Therefore, the novel biosynthesis CdS QDs can be a significant fluorescence probe for the detection of TET that shows exceptional sensitivity and selectivity.

Vermi-cyanobacterial remediation of cadmium-contaminated soil with rice husk biochar: An eco-friendly approach

Present study is aimed to evaluate the influence of earthworm (Eisenia fetida), Cyanobacteria (Cylindrospermum stagnale), and rice husk biochar (BC) on cadmium (Cd) detoxification in artificially contaminated soil. The Cd content was kept at 10 mg/kg in factorial design I, coupled with 2% and 0% BC. E. fetida and C. stagnale un-inoculated and inoculated experiments were maintained respectively as negative and positive controls. In factorial design II, E. fetida and C. stagnale were inoculated, along with BC (0% and 2%, denoted as B), without BC (WB), along with four different Cd concentrations (Cd-0, Cd-5, Cd-10, and Cd-20 mg/kg). Results suggest a substantial amount of Cd removal in BC-assisted treatments when compared to negative control-1. Cd (mg/g) in E. fetida tissue ranged from 0.019 (WB2) to 0.0985 (B4). C. stagnale of WB4 (0.036) bioaccumulated the most Cd (mg/g), while B2 showed the least (0.018). The maximum quantity of metallothionein (5.34 μM/mg) was detected in E. fetida of B4 (factorial design - II) and the minimum was claimed in WB1 (0.48 μM/mg) at the end. Earthworm metallothionein protein is a key component in Cd removal from soil by playing an important role in detoxification process. Microbial communities and humic substances were observed in BC-assisted treatments, which aided in Cd-contaminated soil remediation. The present findings suggest that BC (2%) + earthworms + algae could be a suitable remediation strategy for Cd contaminated soil. BC + earthworm + algal-based investigation on heavy metal remediation will be a valuable platform for detoxifying harmful metals in soils.

Simultaneous removal of ternary heavy metal ions by a newly isolated Microbacterium paraoxydans strain VSVM IIT(BHU) from coal washery effluent

In the present work, the removal of Cr (VI), Cd (II) and Pb (II) at 50 mg/L of each metal ion concentration was investigated by Microbacterium paraoxydans strain VSVM IIT(BHU). The heavy metal binding on the bacterial cell surface was confirmed through X-ray photoelectron spectroscopy and energy dispersive X-ray. X-ray photoelectron spectroscopy analysis also confirmed the reduction of Cr (VI) to Cr (III). Heavy metal removal dynamics was investigated by evaluating dimensionless, and the value of N_k (9.49 × 10^-3, 9.92 × 10^-3 and 1.23 × 10^-2 for Cr (VI), Cd (II) and Pb (II) ions) indicated that the removal of heavy metals by bacterial isolate was mixed diffusion and transfer controlled. It was found that both the experimental and predicted values for isolated bacterial strain coincided with each other with a good R² value in the L-M Algorithm range of 0.94-0.98 for the ternary metal ion system. The bacterial isolate presented a maximum heavy metal ion removal efficiency of 91.62% Cr (VI), 89.29% Pb (II), and 83.29% Cd (II) at 50 mg/L.

Recent advances in bacterial biosensing and bioremediation of cadmium pollution: a mini-review

Cadmium (Cd) pollution has become a global environmental issue because Cd gets easily accumulated and translocated in the food chain, threatening human health. Considering the detrimental effects and non-biodegradability of environmental Cd, this is an urgent issue that needs to be addressed through the development of robust, cost-effective, and eco-friendly green routes for monitoring and remediating toxic levels of Cd. This article attempts to review various bacterial approaches toward biosensing and bioremediation of Cd in the environment. This review focuses on the recent development of bacterial cell-based biosensors for the detection of bioavailable Cd and the bioremediation of toxic Cd by natural or genetically-engineered bacteria. The present limitations and future perspectives of these available bacterial approaches are outlined. New trends for integrating synthetic biology and metabolic engineering into the design of bacterial biosensors and bioadsorbers are additionally highlighted.

Cadmium toxicity in plants: Impacts and remediation strategies

Cadmium (Cd) is an unessential trace element in plants that is ubiquitous in the environment. Anthropogenic activities such as disposal of urban refuse, smelting, mining, metal manufacturing, and application of synthetic phosphate fertilizers enhance the concentration of Cd in the environment and are carcinogenic to human health. In this manuscript, we reviewed the sources of Cd contamination to the environment, soil factors affecting the Cd uptake, the dynamics of Cd in the soil rhizosphere, uptake mechanisms, translocation, and toxicity of Cd in plants. In crop plants, the toxicity of Cd reduces uptake and translocation of nutrients and water, increases oxidative damage, disrupts plant metabolism, and inhibits plant morphology and physiology. In addition, the defense mechanism in plants against Cd toxicity and potential remediation strategies, including the use of biochar, minerals nutrients, compost, organic manure, growth regulators, and hormones, and application of phytoremediation, bioremediation, and chemical methods are also highlighted in this review. This manuscript may help to determine the ecological importance of Cd stress in interdisciplinary studies and essential remediation strategies to overcome the contamination of Cd in agricultural soils.

Assessment of cadmium tolerance and biosorptive potential of Bacillus Cereus GCFSD01 isolated from cadmium contaminated soil

Continuous occurrence of heavy metals is a major cause of environmental pollution due to its toxic effects. At minimum concentrations, these metals are highly reactive and can gather in the food chains and food web, causing major dangers to public health concerns. Soil samples were collected from Paharang drain, Faisalabad. Cadmium tolerant bacteria were isolated and evaluated for their MIC against Cd. The isolated bacterial strain GCFSD01 showed MIC value upto 30 mM/L. The bacterial strain with the highest resistance against Cd was selected for further study. Molecular characterization of bacterial isolate GCFSD01 was performed by 16S rRNA which confirmed it as Bacillus cereus. Optimum growth conditions of bacterial strain were also evaluated. Strain GCFSD01 showed optimum growth at pH 7 and 37 °C temperature. Our result revealed that B. cereus strain GCFSD01 reduced 61.3% Cd after 48 hrs. Multiple metal tolerance and Cd reduction by B. cereus indicate its potential for further use for decontamination of polluted soil.

Optimizing the Management of Cadmium Bioremediation Capacity of Metal-Resistant Pseudomonas sp. Strain Al-Dhabi-126 Isolated from the Industrial City of Saudi Arabian Environment

In this study, 23 bacterial strains were isolated from a Cadmium (Cd) contaminated soil in the industrial city, Riyadh of Saudi Arabia. Among these isolates six strains were found to withstand cadmium contamination and grow well. From the six isolates Pseudomonas sp. strain Al-Dhabi-122-127 were found to resist cadmium toxicity to a higher level. The isolates were subjected to biochemical and 16S rDNA gene sequence characterization to confirm their identification. The bacterial strain Al-Dhabi-124 showed 1.5 times higher Cd-degrading activity than Al-Dhabi-122 and Al-Dhabi-123, and Al-Dhabi-126 exhibited 3.5 times higher Cd-degrading activity, higher than the other strains. An atomic absorption spectrophotometer study showed that the strain Al-Dhabi-126 absorbed Cd, and that the bacterial strain Al-Dhabi-126 was found to tolerate cadmium level up to 2100 µg/mL. The bacterial strain Al-Dhabi-126 showed a maximum Cd removal efficacy at pH between 6.0 and 8.0. The efficacy decreased sharply after an increase in pH (9.0). An optimum temperature of 50 °C and pH 6.0 were found to be effective for the Cd removal process by the isolate. The study indicated that the bacterial strain Al-Dhabi-126 can be used effectively for the bioremediation of heavy metals like cadmium, a major toxic pollutant in industrial effluents.

Enhanced uptake of Cd by biofilm forming Cd resistant plant growth promoting bacteria bioaugmented to the rhizosphere of Vetiveria zizanioides

Heavy metals are the major cause of pollution and cadmium is one among the highly toxic metals discharged into the environment from various industries. The current study was focused on the bioremoval of cadmium by phyto and rhizoremediation approach using Vetiveria zizanioides. The bacterial strains were isolated from wetland paddy rhizosphere soil and the isolate VITJAN13 was found to be a biofilm forming Cd resistant plant growth promoting rhizobacteria (PGPR). The 16S rRNA gene sequencing revealed VITJAN13 to be the closest neighbor of Aeromonas sp. and was submitted to Genbank with the accession number KX770741. Further, pot culture studies indicated that the treatments bioaugmented with VITJAN13 increased the root length and shoot height by 21.4 and 17.36%, respectively as compared to the non-augmented plants. Hence, bioaugmentation of Aeromonas sp. in the rhizosphere of Vetiveria zizanioides enhanced the uptake of cadmium by 67.7% in the soil treated with 15 mg/kg of Cd to that of the phytoremediation setup.

Adaptive laboratory evolution of cadmium tolerance in Synechocystis sp. PCC 6803

BACKGROUND

Cadmium has been a significant threat to environment and human health due to its high toxicity and wide application in fossil-fuel burning and battery industry. Cyanobacteria are one of the most dominant prokaryotes, and the previous studies suggested that they could be valuable in removing Cd2+ from waste water. However, currently, the tolerance to cadmium is very low in cyanobacteria. To further engineer cyanobacteria for the environmental application, it is thus necessary to determine the mechanism that they respond to high concentration of cadmium.

RESULTS

In this study, a robust strain of Synechocystis PCC 6803 (named ALE-9.0) tolerant to CdSO4 with a concentration up to 9.0 µM was successfully isolated via adaptive laboratory evolution over 802-day continuous passages under cadmium stress. Whole-genome re-sequencing was then performed and nine mutations were identified for the evolved strain compared to the wild-type strain. Among these mutations, a large fragment deletion in slr0454 encoding a cation or drug efflux system protein was found to contribute directly to the resistance to Cd2+ stress. In addition, five other mutations were also demonstrated related to the improved Cd2+ tolerance in ALE-9.0. Moreover, the evolved ALE-9.0 strain was found to obtain cross tolerance to some other heavy metals like zinc and cobalt as well as higher resistance to high light.

CONCLUSIONS

The work here identified six genes and their mutations related to Cd2+ tolerance in Synechocystis PCC 6803, and demonstrated the feasibility of adaptive laboratory evolution in tolerance modifications. This work also provided valuable information regarding the cadmium tolerance mechanism in Synechocystis PCC 6803, and useful insights for cyanobacterial robustness and tolerance engineering.

Assessment of heavy metal tolerance and biosorptive potential of Klebsiella variicola isolated from industrial effluents

Heavy metal contamination now a day is one of the major global environmental concerns. Textile effluents of Faisalabad Pakistan are heavily contaminated with heavy metals and demands to explore native microorganisms as effective bioremediation tool. Study aimed to isolate heavy metal tolerant bacteria from textile effluents of Faisalabad Pakistan and to evaluate their biosorptive potential. Out of 30 collected samples 13 isolates having metal tolerance potential against Ni and Co were screened out. Maximum tolerable concentration and multi metal resistance was determined. A native bacterial strain showing maximum tolerance to Ni and Co and multi metal resistance against Ni, Co and Cr at different levels was selected and named as Abuzar Microbiology 1 (AMIC1). Molecular characterization confirmed it as Klebsiella variicola which was submitted in First fungal culture bank of Pakistan (FCBP-WB-0688). ICP-OES revealed that it reduced Ni (50, 49%) and Co (71, 68.6%) after 24 and 48 h, respectively. FT-IR was used to analyze functional groups and overall nature of chemical bonds. Changes in spectra of biomass were observed after absorption of Ni and Co by K. variicola. SEM revealed morphological changes in bacteria in response to metal stress. Both metals affected bacterial cell wall and created pores in it. However effect of Ni was more pronounced than Co. It was concluded that K. variicola, a native novel strain possessed significant heavy metal tolerance and bioremediation potential against Ni and Co. It may be used in future for development of bioremediation agents to detoxify textile effluents at industrial surroundings.