Strategies affording prevascularized cell-based constructs for myocardial tissue engineering. Stem Cells Int. 2014;2014:434169. [PMID: 24511317 PMCID: PMC3913389 DOI: 10.1155/2014/434169]

Generating human skeletal myoblast spheroids for vascular myogenic tissue engineering

Engineered myogenic microtissues derived from human skeletal myoblasts offer unique opportunities for varying skeletal muscle tissue engineering applications, such asin vitrodrug-testing and disease modelling. However, more complex models require the incorporation of vascular structures, which remains to be challenging. In this study, myogenic spheroids were generated using a high-throughput, non-adhesive micropatterned surface. Since monoculture spheroids containing human skeletal myoblasts were unable to remain their integrity, co-culture spheroids combining human skeletal myoblasts and human adipose-derived stem cells were created. When using the optimal ratio, uniform and viable spheroids with enhanced myogenic properties were achieved. Applying a pre-vascularization strategy, through addition of endothelial cells, resulted in the formation of spheroids containing capillary-like networks, lumina and collagen in the extracellular matrix, whilst retaining myogenicity. Moreover, sprouting of endothelial cells from the spheroids when encapsulated in fibrin was allowed. The possibility of spheroids, from different maturation stages, to assemble into a more large construct was proven by doublet fusion experiments. The relevance of using three-dimensional microtissues with tissue-specific microarchitecture and increased complexity, together with the high-throughput generation approach, makes the generated spheroids a suitable tool forin vitrodrug-testing and human disease modeling.

Strategies to Induce Blood Vessel Ingrowth into Skin Grafts and Tissue-Engineered Substitutes

Skin is a multilayer organ consisting of several tissues and appendages residing in a complex niche. Adequate and physiologically regulated vascularization is an absolute requirement for skin homeostasis, regeneration, and wound healing. The lack of vascular networks and ischemia results in delayed wound closure. In addition, vascularization is critical for the prolonged function and survival of skin grafts and tissue-engineered skin substitutes. This study highlights the clinical challenges associated with the limited vascularization in the cutaneous wounds. Then, we highlight the novel approaches for the development of vascular networks in the skin autografts, allografts, and artificial substitutes. Also, the future directions to overcome the existing vascularization complications in skin grafting and synthetic skin substitutes are presented. Statement of Significance Delayed closure of large dermal wounds, such as burn injuries, results from the lack of vascular networks and ischemia. The amount of blood supply in the skin graft is the primary factor determining the quality of the transplanted grafts. The current skin grafts and their fabrication methods lack the appropriate features that contribute to the vascularization and integration of the wound bed and graft and adherence to the skin layers. Therefore, the new generation of skin grafts should consider advanced technologies to induce vascularization and overcome current challenges.

Development of a Dual Hydrogel Model System for Vascularization

Numerous hydrogel-based culture systems are used to create in vitro model for prevascularization. Hydrogels used to induce a microenvironment conducive to microvessel formation are typically soft and fast degradable, but often suffer from maintaining a lasting perfusable channel in vitro. Here, a dual hydrogel system that consists of photo-crosslinkable gelatin methacrylate (GelMA) and polyethylene glycol dimethacrylate (PEGDMA) is reported. GelMA hydrogels present soft and rapidly degradable properties and show microporous structures while PEGDMA is relatively stiff, almost nondegradable in vitro, and less porous. The dual hydrogel system is sequentially photo-crosslinked to construct an endothelial cell (EC)-lined perfusable PEGDMA channel and surrounding GelMA for endothelial vascular networks. Such dual hydrogel system exhibits seamless integration of the stiff PEGDMA channel and the surrounding soft GelMA, and facilitates rapid EC sprouting and extensive microvessel formation from a stable endothelium on the PEGDMA channel into the GelMA. Furthermore, diffusivity of biomolecules in the perfusable dual hydrogel system is affected by both the structural and physicochemical properties of the hydrogel system and the microvascular networks formed in the system. The establishment of the dual hydrogel system for vascularization holds great promise as an in vitro angiogenesis model and prevascularization strategy of large tissue constructs.

Vascularization strategies for skin tissue engineering

Lack of proper vascularization after skin trauma causes delayed wound healing. This has sparked the development of various tissue engineering strategies to improve vascularization.

Bioreactors for Cardiac Tissue Engineering

The advances in biotechnology, biomechanics, and biomaterials can be used to develop organ models that aim to accurately emulate their natural counterparts. Heart disease, one of the leading causes of death in modern society, has attracted particular attention in the field of tissue engineering. To avoid incorrect prognosis of patients suffering from heart disease, or from adverse consequences of classical therapeutic approaches, as well as to address the shortage of heart donors, new solutions are urgently needed. Biotechnological advances in cardiac tissue engineering from a bioreactor perspective, in which recapitulation of functional, biochemical, and physiological characteristics of the cardiac tissue can be used to recreate its natural microenvironment, are reviewed. Detailed examples of functional and preclinical applications of engineered cardiac constructs and the state-of-the-art systems from a bioreactor perspective are provided. Finally, the current trends and future directions of the field for its translation to clinical settings are discussed.

The Rapidly Evolving Concept of Whole Heart Engineering

Whole heart engineering represents an incredible journey with as final destination the challenging aim to solve end-stage cardiac failure with a biocompatible and living organ equivalent. Its evolution started in 2008 with rodent organs and is nowadays moving closer to clinical application thanks to scaling-up strategies to human hearts. This review will offer a comprehensive examination on the important stages to be reached for the bioengineering of the whole heart, by describing the approaches of organ decellularization, repopulation, and maturation so far applied and the novel technologies of potential interest. In addition, it will carefully address important demands that still need to be satisfied in order to move to a real clinical translation of the whole bioengineering heart concept.

Mechanical Actuation Systems for the Phenotype Commitment of Stem Cell-Based Tendon and Ligament Tissue Substitutes

High tensile forces transmitted by tendons and ligaments make them susceptible to tearing or complete rupture. The present standard reparative technique is the surgical implantation of auto- or allografts, which often undergo failure.Currently, different cell types and biomaterials are used to design tissue engineered substitutes. Mechanical stimulation driven by dedicated devices can precondition these constructs to a remarkable degree, mimicking the local in vivo environment. A large number of dynamic culture instruments have been developed and many appealing results collected. Of the cells that have been used, tendon stem cells are the most promising for a reliable stretch-induced tenogenesis, but their reduced availability represents a serious limitation to upscaled production. Biomaterials used for scaffold fabrication include both biological molecules and synthetic polymers, the latter being improved by nanotechnologies which reproduce the architecture of native tendons. In addition to cell type and scaffold material, other variables which must be defined in mechanostimulation protocols are the amplitude, frequency, duration and direction of the applied strain. The ideal conditions seem to be those producing intermittent tension rather than continuous loading. In any case, all physical parameters must be adapted to the specific response of the cells used and the tensile properties of the scaffold. Tendon/ligament grafts in animals usually have the advantage of mechanical preconditioning, especially when uniaxial cyclic forces are applied to cells engineered into natural or decellularized scaffolds. However, due to the scarcity of in vivo research, standard protocols still need to be defined for clinical applications.

Delivery of growth factor-based therapeutics in vascular diseases: Challenges and strategies

Either cardiovascular or peripheral vascular diseases have become the major cause of morbidity and mortality worldwide. Recently, growth factors therapeutics, whatever administrated in form of exogenous growth factors or their relevant genes have been discovered to be an effective strategy for the prevention and therapy of vascular diseases, because of their promoting angiogenesis. Besides, as an alternative, stem cell-based therapy has been also developed in view of their paracrine-mediated effect or ability of differentiation toward angiogenesis-related cells under assistance of growth factors. Despite of being specific and potent, no matter growth factors or stem cells-based therapy, their full clinical transformation is limited from bench to bedside. In this review, the potential choices of therapeutic modes based on types of different growth factors or stem cells were firstly summarized for vascular diseases. The confronted various challenges such as lack of non-invasive delivery method, the physiochemical challenge, the short half-life time, and poor cell survival, were carefully analyzed for these therapeutic modes. Various strategies to overcome these limitations are put forward from the perspective of drug delivery. The expertised design of a suitable delivery form will undoubtedly provide valuable insight into their clinical application in the regenerative medicine.

Digital biomanufacturing supporting vascularization in 3D bioprinting

Synergies in bioprinting are appearing from individual researchers focusing on divergent aspects of the technology. Many are now evolving from simple mono-dimensional operations to model-controlled multi-material, interpenetrating networks using multi-modal deposition techniques. Bioinks are being designed to address numerous critical process parameters. Both the cellular constructs and architectural design for the necessary vascular component in digitally biomanufactured tissue constructs are being addressed. Advances are occurring from the topology of the circuits to the source of the of the biological microvessel components. Instruments monitoring and control of these activates are becoming interconnected. More and higher quality data are being collected and analysis is becoming richer. Information management and model generation is now describing a "process network." This is promising; more efficient use of both locally and imported raw data supporting accelerated strategic as well as tactical decision making. This allows real time optimization of the immediate bioprinting bioprocess based on such high value criteria as instantaneous progress assessment and comparison to previous activities. Finally, operations up- and down-stream of the deposition are being included in a supervisory enterprise control.

Prevascularization of Decellularized Porcine Myocardial Slice for Cardiac Tissue Engineering

Prevacularization strategies have been implemented in tissue engineering to generate microvasculature networks within a scaffold prior to implantation. Prevascularizing scaffolds will shorten the time of functional vascular perfusion with host upon implantation. In this study, we explored key variables affecting the interaction between decellularized porcine myocardium slices (dPMSs) and reseeded stem cells toward the fabrication of prevascularized cardiac tissue. Our results demonstrated that dPMS supports attachment of human mesenchymal stem cells (hMSCs) and rat adipose derived stem cells (rASCs) with high viability. We found that cell seeding efficiency and proliferation are dPMS thickness dependent. Compared to lateral cell seeding, bilateral cell seeding strategy significantly enhanced seeding efficiency, infiltration, and growth in 600 μm dPMS. dPMS induced endothelial differentiation and maturation of hMSCs and rASCs after 1 and 5 days culture, respectively. These results indicate the potential of dPMS as a powerful platform to develop prevascularized scaffolds and fabricate functional cardiac patches.

Inosculation and perfusion of pre-vascularized tissue patches containing aligned human microvessels after myocardial infarction

A major goal of tissue engineering is the creation of pre-vascularized tissues that have a high density of organized microvessels that can be rapidly perfused following implantation. This is especially critical for highly metabolic tissues like myocardium, where a thick myocardial engineered tissue would require rapid perfusion within the first several days to survive transplantation. In the present work, tissue patches containing human microvessels that were either randomly oriented or aligned were placed acutely on rat hearts post-infarction and for each case it was determined whether rapid inosculation could occur and perfusion of the patch could be maintained for 6 days in an infarct environment. Patches containing self-assembled microvessels were formed by co-entrapment of human blood outgrowth endothelial cells and human pericytes in fibrin gel. Cell-induced gel contraction was mechanically-constrained resulting in samples with high densities of microvessels that were either randomly oriented (with 420 ± 140 lumens/mm(2)) or uniaxially aligned (with 940 ± 240 lumens/mm(2)) at the time of implantation. These patches were sutured onto the epicardial surface of the hearts of athymic rats following permanent ligation of the left anterior descending artery. In both aligned and randomly oriented microvessel patches, inosculation occurred and perfusion of the transplanted human microvessels was maintained, proving the in vivo vascularization potential of these engineered tissues. No difference was found in the number of human microvessels that were perfused in the randomly oriented (111 ± 75 perfused lumens/mm(2)) and aligned (173 ± 97 perfused lumens/mm(2)) patches. Our results demonstrate that tissue patches containing a high density of either aligned or randomly oriented human pre-formed microvessels achieve rapid perfusion in the myocardial infarct environment - a necessary first-step toward the creation of a thick, perfusable heart patch.

Engineered Biomaterials to Enhance Stem Cell-Based Cardiac Tissue Engineering and Therapy

Cardiovascular disease is a leading cause of death worldwide. Since adult cardiac cells are limited in their proliferation, cardiac tissue with dead or damaged cardiac cells downstream of the occluded vessel does not regenerate after myocardial infarction. The cardiac tissue is then replaced with nonfunctional fibrotic scar tissue rather than new cardiac cells, which leaves the heart weak. The limited proliferation ability of host cardiac cells has motivated investigators to research the potential cardiac regenerative ability of stem cells. Considerable progress has been made in this endeavor. However, the optimum type of stem cells along with the most suitable matrix-material and cellular microenvironmental cues are yet to be identified or agreed upon. This review presents an overview of various types of biofunctional materials and biomaterial matrices, which in combination with stem cells, have shown promises for cardiac tissue replacement and reinforcement. Engineered biomaterials also have applications in cardiac tissue engineering, in which tissue constructs are developed in vitro by combining stem cells and biomaterial scaffolds for drug screening or eventual implantation. This review highlights the benefits of using biomaterials in conjunction with stem cells to repair damaged myocardium and give a brief description of the properties of these biomaterials that make them such valuable tools to the field.

Tunable osteogenic differentiation of hMPCs in tubular perfusion system bioreactor

The use of bioreactors for bone tissue engineering has been widely investigated. While the benefits of shear stress on osteogenic differentiation are well known, the underlying effects of dynamic culture on subpopulations within a bioreactor are less evident. In this work, we explore the influence of applied flow in the tubular perfusion system (TPS) bioreactor on the osteogenic differentiation of human mesenchymal progenitor cells (hMPCs), specifically analyzing the effects of axial position along the growth chamber. TPS bioreactor experiments conducted with unidirectional flow demonstrated enhanced expression of osteogenic markers in cells cultured downstream from the inlet flow. We utilized computational fluid dynamic modeling to confirm uniform shear stress distribution on the surface of the scaffolds and along the length of the growth chamber. The concept of paracrine signaling between cell populations was validated with the use of alternating flow, which diminished the differences in osteogenic differentiation between cells cultured at the inlet and outlet of the growth chamber. After the addition of controlled release of bone morphogenic protein-2 (BMP-2) into the system, osteogenic differentiation among subpopulations along the growth chamber was augmented, yet remained homogenous. These results allow for greater understanding of axial bioreactor cultures, their microenvironment, and how well-established parameters of osteogenic differentiation affect bone tissue development. With this work, we have demonstrated the capability of tuning osteogenic differentiation of hMPCs through the application of fluid flow and the addition of exogenous growth factors. Such precise control allows for the culture of distinct subpopulation within one dynamic system for the use of complex engineered tissue constructs. Biotechnol. Bioeng. 2016;113: 1805-1813. © 2016 Wiley Periodicals, Inc.

Stem cell-derived vasculature: A potent and multidimensional technology for basic research, disease modeling, and tissue engineering

Proper blood vessel networks are necessary for constructing and re-constructing tissues, promoting wound healing, and delivering metabolic necessities throughout the body. Conversely, an understanding of vascular dysfunction has provided insight into the pathogenesis and progression of diseases both common and rare. Recent advances in stem cell-based regenerative medicine - including advances in stem cell technologies and related progress in bioscaffold design and complex tissue engineering - have allowed rapid advances in the field of vascular biology, leading in turn to more advanced modeling of vascular pathophysiology and improved engineering of vascularized tissue constructs. In this review we examine recent advances in the field of stem cell-derived vasculature, providing an overview of stem cell technologies as a source for vascular cell types and then focusing on their use in three primary areas: studies of vascular development and angiogenesis, improved disease modeling, and the engineering of vascularized constructs for tissue-level modeling and cell-based therapies.

Autologous tissue patch rich in stem cells created in the subcutaneous tissue

AIM: To investigate whether we could create natural autologous tissue patches in the subcutaneous space for organ repair.

METHODS: We implanted the following three types of inert foreign bodies in the subcutaneous tissue of rats to produce autologous tissue patches of different geometries: (1) a large-sized polyvinyl tube (L = 25 mm, internal diameter = 7 mm) sealed at both ends by heat application for obtaining a large flat piece of tissue patch for organ repair; (2) a fine polyvinyl tubing (L = 25 mm, internal diameter = 3 mm) for creating cylindrically shaped grafts for vascular or nerve repair; and (3) a slurry of polydextran particle gel for inducing a bladder-like tissue. Implantation of inert materials was carried out by making a small incision on one or either side of the thoracic-lumbar region of rats. Subcutaneous pockets were created by blunt dissection around the incision into which the inert bodies were inserted (1 or 2 per rat). The incisions were closed with silk sutures, and the animals were allowed to recover. In case of the polydextran gel slurry 5 mL of the slurry was injected in the subcutaneous space using an 18 gauge needle. After implanting the foreign bodies a newly regenerated encapsulating tissue developed around the foreign bodies. The tissues were harvested after 4-42 d of implantation and studied by gross examination, histology, and histochemistry for organization, vascularity, and presence of mesenchymal stem cells (MSCs) (CD271+CD34+ cells).

RESULTS: Implanting a large cylindrically shaped polyvinyl tube resulted in a large flat sheet of tissue that could be tailored to a specific size and shape for use as a tissue patch for repairing large organs. Implanting a smaller sized polyvinyl tube yielded a cylindrical tissue that could be useful for repairing nerves and blood vessels. This type of patch could be obtained in different lengths by varying the length of the implanted tube. Implanting a suspension of inert polydextran suspension gave rise to a bladder-like tissue that could be potentially used for repairing heart valves. Histologically, the three different types of tissue patches generated were organized similarly, consisting of three layers, increasing in thickness until day 14. The inner layer in contact with the inert material was avascular; a middle layer that was highly vascular and filled with matrix, and an outer layer consisting of loose connective tissue. MSCs identified as CD271+CD34+ cells were present in the medial layer and around major blood vessels at day 4 but absent at later time points. The early-harvested tissues, endowed with MSCs, could be used for tissue repair, while the later-harvested tissues, being less vascular but thicker and tougher, could be used as filler tissue for cosmetic purposes.

CONCLUSION: An autologous, vascularized tissue patch of desired shape and size can be created in the subcutaneous space by implanting different types of inert bodies.

The role of tissue engineering and biomaterials in cardiac regenerative medicine

In recent years, the development of 3-dimensional engineered heart tissue (EHT) has made large strides forward because of advances in stem cell biology, materials science, prevascularization strategies, and nanotechnology. As a result, the role of tissue engineering in cardiac regenerative medicine has become multifaceted as new applications become feasible. Cardiac tissue engineering has long been established to have the potential to partially or fully restore cardiac function after cardiac injury. However, EHTs may also serve as surrogate human cardiac tissue for drug-related toxicity screening. Cardiotoxicity remains a major cause of drug withdrawal in the pharmaceutical industry. Unsafe drugs reach the market because preclinical evaluation is insufficient to weed out cardiotoxic drugs in all their forms. Bioengineering methods could provide functional and mature human myocardial tissues, ie, physiologically relevant platforms, for screening the cardiotoxic effects of pharmaceutical agents and facilitate the discovery of new therapeutic agents. Finally, advances in induced pluripotent stem cells have made patient-specific EHTs possible, which opens up the possibility of personalized medicine. Herein, we give an overview of the present state of the art in cardiac tissue engineering, the challenges to the field, and future perspectives.