Validation of simultaneous quantitative method of HIV protease inhibitors atazanavir, darunavir and ritonavir in human plasma by UPLC-MS/MS

Quality by design tool-evaluated stability-indicating ultra-performance liquid chromatography method for the determination of drugs (ritonavir and darunavir) used to treat the human immunodeficiency virus/acquired immunodeficiency syndrome

Ritonavir and darunavir were examined using a ultra-performance liquid chromatography (UPLC) approach in pharmaceutical dosage forms. The small number of analytical studies that are currently available do not demonstrate the method's stability or nature. The study sought to assess both chemicals using a stability-indicating approach with a relatively short run time. The HSS C18 (100 × 2.1 mm), 2-mm column was used for the chromatographic separation, and isocratic elution was used to achieve this. In the mobile phase, methanol and 0.01 M phosphate buffer (pH 4.0) were included in a 60:40 (v/v) ratio. Throughout the analysis, the flow rate was kept at 0.2 mL min-1 , and a photodiode array detector set to 266 nm was used to find the major components. The proposed method showed a linear response (r2  > 0.999), and the accuracy was between 98.0% and 102.0%. The precision data showed relative standard deviation ≤1.0%. The UPLC method for quantification of ritonavir and darunavir in pharmaceutical dosage forms using a very short run time of under a minute is the subject of the proposed article. To meet current regulatory criteria, the quality by design idea was used in the method performance verification.

Analytical Techniques for the Analysis of Lopinavir and Ritonavir in Pharmaceutical Dosage Form and Biological Matrices: A Review

Background:

Lopinavir and Ritonavir are the protease inhibitor type of anti-retroviral drugs. Both are used for the treatment of HIV/AIDS. This paper reviews many analytical methods for the analysis of LPV and RTV in pharmaceutical formulations (tablet, capsule, syrup, and bulk) and biological fluids (human plasma, serum, cerebrospinal fluid, rat plasma, and human hair).

Objective:

The study aims to summarize various ana¬lytical techniques, such as Chromatography, Spectrophotometry; and also hyphenated techniques, such as LC-MS/MS, UPLC-MS for analysis of Lopinavir and Ritonavir.

Method:

The review deals with com¬prehensive details about the type of various analytical techniques, such as spectroscopy (UV), chromatography (RP-HPLC, HPTLC, UPLC), and hyphenated techniques, i.e., LC-MS/MS, UPLC-MS for the analysis of lopinavir and ritonavir. These techniques are either explored for the quantification, de¬tection of metabolite or for stability studies of the LPV & RTV.

Conclusion:

The present studies revealed that the HPLC technique along with the spectro-scopic, have been most widely used for the analysis. Out of the developed methods, hyphenated UPLC-MS and LC-MS are very sensitive and helps in the easy estimation of drugs compared to that of the other techniques. This review may provide comprehensive details to the researchers working in the area of analytical research of LPV & RTV.

Combining subsidiary and synchronous approaches for concurrent spectrofluorimetric assurance of lopinavir and ritonavir in tablets utilized in convention for treatment of coronavirus infection (COVID-19) and biological fluids

In this think about, assurance of lopinavir and ritonavir down to organic concentration level has been carried out. The assurance is based on expanding the selectivity of the spectrofluorimetric procedure by combining both subordinate and synchronous spectrofluorimetric approaches, which allow effective estimation of lopinavir at 248.8 nm and ritonavir at 300.1 nm within the nearness of each other at Δλ of 60 nm. Worldwide Conference on Harmonization approval rules were taken after to completely approve the strategy, and linearity was gotten for the two drugs over the extend of 0.4-2.4 µg mL^-1 for Lopinavir and 0.1-0.6 µg mL^-1 for ritonavir. Application of of the strategy was successfully carried out within the commercial tablets with great understanding with the comparison strategies. As the detection limits were down to 0.133 and 0.022 µg mL^-1 and quantitation limits were 0.395 and 0.068 µg mL^-1 for lopinavir and ritonavir, individually; the in vivo assurance of lopinavir and ritonavir in spiked plasma tests was pertinent. The rate recuperations in natural tests were 99.10 ± 0.77 and 99.54 ± 0.60 for lopinavir and ritonavir, individually. Water was utilized as the ideal weakening dissolvable within the proposed strategy which includes an eco-friendly justify.

A Novel Ultra Performance Liquid Chromatography-PDA Method Development and Validation for Darunavir in Bulk and Its Application to Marketed Dosage Form

Aims and Objective:

The aim of this study was to develop and validate a novel ultra-performance liquid chromatographic method for estimation of darunavir in a bulk and tablet dosage form.

Materials and Methods:

The chromatographic separation was achieved using DIKMA Endoversil (2.1mm x 50mm, 1.7 µm) column. A mixture of 40% buffer (0.1% octa sulfonic acid) and 60% acetonitrile was used as a mobile phase with the isocratic elution mode and eluent was monitored at 281nm using UV detector. The method was continued and validated in accordance with International Conference on Harmonization Guidelines. Validation study revealed the specificity and reliability of the method.

Results:

In this method, darunavir was eluted with retention time of 0.516 min. Calibration curve plots were found linear over the concentration ranges 10–50 μg/mL for darunavir. Limit of detection was 0.02 μg/mL and limit of quantification was found 0.07 μg/mL. The present method was also found stable in force degradation study.

Conclusion:

The empirical evidences of all the study results revealed the suitability of the estimation of darunavir in bulk and tablet dosage form without any interference from the excipients.

Detection and quantification of Covid-19 antiviral drugs in biological fluids and tissues

Since coronavirus disease 2019 (COVID-19) started as a fast-spreading pandemic, causing a huge number of deaths worldwide, several therapeutic options have been tested to counteract or reduce the clinical symptoms of patients infected with the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Currently, no specific drugs for COVID-19 are available, but many antiviral agents have been authorised by several national agencies. Most of them are under investigation in both preclinical and clinical trials; however, pharmacokinetic and metabolism studies are needed to identify the most suitable dose to achieve the desired effect on SARS-CoV-2. Therefore, the efforts of the scientific community have focused on the screening of therapies able to counteract the most severe effects of the infection, as well as on the search of sensitive and selective analytical methods for drug detection in biological matrices, both fluids and tissues. In the last decade, many analytical methods have been proposed for the detection and quantification of antiviral compounds currently being tested for COVID-19 treatment. In this review, a critical discussion on the overall analytical procedure is provided, i.e (a) sample pre-treatment and extraction methods such as protein precipitation (PP), solid-phase extraction (SPE), liquid-liquid extraction (LLE), ultrasound-assisted extraction (UAE) and QuEChERS (quick, easy, cheap, effective, rugged and safe), (b) detection and quantification methods such as potentiometry, spectrofluorimetry and mass spectrometry (MS) as well as (c) methods including a preliminary separation step, such as high performance liquid chromatography (HPLC) and capillary electrophoresis (CE) coupled to UV-Vis or MS detection. Further current trends, advantages and disadvantages and prospects of these methods have been discussed, to help the analytical advances in reducing the harm caused by the SARS-CoV-2 virus.

Darunavir: A comprehensive profile

Darunavir: (3R,3aS,6aR)-hexahydrofuro[2,3-b]furan-3-yl [(2S,3R)-4-{[(4-aminophenyl)sulfonyl] (isobutyl)amino}-3-hydroxy-1-phenyl-2-butanyl]carbamate is a synthetic non-peptide protease inhibitor. On June 2006, it was first approved by the Food and Drug administration (FDA) for treatment of resistant type-1 of the human immunodeficiency virus (HIV). In July 2016, the FDA expanded the approval for use of darunavir in pregnant women with HIV infection. Darunavir prevents the replication of HIV virus by inhibiting the catalytic activity of the HIV-1 protease enzyme, and selectively inhibits the cleavage of HIV encoded Gag-Pol polyproteins in virus-infected cells, which prevents the formation of mature infectious virus particles. Darunavir is unique among currently available protease inhibitors because it maintains antiretroviral activity against a variety of multidrug-resistant HIV strains. This article discusses, by a critical extensive review of the literature, the description of darunavir in terms of its names, formulae, elemental composition, appearance, and use in the treatment of HIV-infected patients. The article also discusses the methods for preparation of darunavir, its physical-chemical properties, analytical methods for its determination, pharmacological properties, and dosing information.

Ultra-high performance liquid chromatography-MS/MS (UHPLC-MS/MS) in practice: analysis of drugs and pharmaceutical formulations

Background

UHPLC-MS/MS is connected in various research facilities for the qualitative and quantitative investigation of a pharmaceutical substance, pharmaceutical items, and biological specimen.

Main body

The commence review article is an endeavor to offer pervasive awareness around assorted aspects and details about the UHPLC-MS/MS and related techniques with the aim on practice to an estimation of medicinal active agents in the last 10 years. The article also focused on isolation, separation, and characterization of present impurity in drug and biological samples.

Conclusion

Review article compiles a general overview of medicinally important drugs and their analysis with UHPLC-MS/MS. It gives fundamental thought regarding applications of UHPLC-MS/MS for the study on safety limit. The summary of developed UHPLC-MS/MS methods gives a contribution to the future trend and limitations in this area of research.