Transcrestal Sinus Lift Procedure Approaching Atrophic Maxillary Ridge: A 60-Month Clinical and Radiological Follow-Up Evaluation

15-Year Retrospective Study on the Success Rate of Maxillary Sinus Augmentation and Implants: Influence of Bone Substitute Type, Presurgical Bone Height, and Membrane Perforation during Sinus Lift

Objectives

To evaluate the success rate of bone grafts and implants carried out at the Latin American Institute for Research and Dental Education (ILAPEO), considering the following: (i) the different pure bone substitutes (autogenous, xenogeneic, and alloplastic), (ii) the presurgical bone height, and (iii) how the treatment is compromised when membrane perforation occurs during sinus lift in maxillary sinus surgeries. Material and Methods. The initial sample comprised 1040 records of maxillary sinus lifting surgeries. After evaluation, the final sample retained 472 grafts performed using the lateral window technique with a total of 757 implants. The grafts were divided into 3 groups: (i) autogenous bone (n = 197), (ii) xenogenous bovine bone (n = 182), and (iii) alloplastic material (n = 93). One calibrated examiner classified the sample into two groups based on the residual bone height (<4 mm and ≥4 mm) of the area of interest measured on parasagittal sections of tomographic images. Data on membrane perforation occurrences in each group were collected; qualitative variables were described using frequency, expressed as percentages. The Chi-square test was used to analyze the success of the graft types and the survival rate of the implants as a function of the grafted material and the residual bone height. The Kaplan-Meier survival analysis was used to calculate the survival rate of bone grafts and implants according to the classifications adopted in this retrospective study.

Results

The success rate of grafts and implants was 98.3% and 97.2%, respectively. There was no statistically significant difference in the success rate among the different bone substitutes (p = 0.140). Only 8 grafts (1.7%) and 21 implants (2.8%) failed. There was a greater success rate for both grafts (96.5%) and implants (97.4%) when the bone height was ≥4 mm. The success rate in the 49 sinuses in which the membrane was perforated was 97.96% for the grafts and 96.2% for the implants. The follow-up periods after rehabilitation ranged from 3 months to 13 years.

Conclusions

Within the limitations of the data analyzed in this retrospective study, maxillary sinus lift was a viable surgical technique that enabled implant placement with a predictable long-term success rate, regardless of the type of material used. The presence of membrane perforation did not interfere with the success rate obtained for grafts and implants.

Evaluation of Root Anatomy and Canal Configuration of Human Permanent Maxillary First Molar Using Cone-Beam Computed Tomography: A Systematic Review

The aim of this paper is to review the literature on root canal configuration (RCC) and the frequency of occurrence of a second mesiobuccal canal (MB) in human permanent maxillary first molars where cone-beam computed tomography (CBCT) is used. Online electronic databases such as PubMed-Medline, Embase, Scopus and Cochrane Library were searched using appropriate keywords from the earliest available date until 12th June 2022, without restriction on language. In the mesiobuccal root, type I was the most frequent (33.29%), followed by types II and IV (27.18% and 26.36%, respectively). Moreover, 68.2% of maxillary first molars had a second MB canal. For both the distobuccal and palatal roots, type I was the most prevalent, with 99.08% and 97.83% occurrence, respectively. All other types were infrequent. Type I RCC is most frequent in all the roots of the maxillary first molars. Hence, care must be taken during biomechanical preparation of the MB roots.

Stress Distribution Pattern in Zygomatic Implants Supporting Different Superstructure Materials

The aim of this study was to assess and compare the stress–strain pattern of zygomatic dental implants supporting different superstructures using 3D finite element analysis (FEA). A model of a tridimensional edentulous maxilla with four dental implants was designed using the computer-aided design (CAD) software. Two standard and two zygomatic implants were positioned to support the U-shaped bar superstructure. In the computer-aided engineering (CAE) software, different materials have been simulated for the superstructure: cobalt–chrome (CoCr) alloy, titanium alloy (Ti), zirconia (Zr), carbon-fiber polymers (CF) and polyetheretherketone (PEEK). An axial load of 500 N was applied in the posterior regions near the zygomatic implants. Considering the mechanical response of the bone tissue, all superstructure materials resulted in homogeneous strain and thus could reconstruct the edentulous maxilla. However, with the aim to reduce the stress in the zygomatic implants and prosthetic screws, stiffer materials, such Zr, CoCr and Ti, appeared to be a preferable option.

Evaluation of crestal sinus floor elevations using versah burs with simultaneous implant placement, at residual bone height ≥ 2.0 _ < 6.0 mm. A prospective clinical study

PURPOSE

To evaluate the efficacy of Versah drills in breaching the maxillary sinus floor while keeping the membrane intact, as well as measure the implant stability (primary stability at the time of implant placement by the osseous densification of the residual bone height (RBH) of ≥ 2.0 _ < 6.0 mm, and secondary stability after 6 months of osseous healing period).

METHODS

This prospective clinical study, which included twenty crestal sinus floor elevations, was conducted on 17 patients (10 males and 7 females, ages 29 to 70 years). The sinus membrane integrity was clinically checked at the time of osseodensification sinus lifting and confirmed by CBCT after sinus augmentation and implant insertion. Time of operation has been recorded from the first drill to implant installation. Primary implant stability was measured using an Osstell beacon at the time of implant placement, and secondary stability was measured after 6 months of osseous healing.

RESULTS

The mean of secondary stability in the current study is significantly higher than the mean of primary stability (P ≤ 0.011), which was 74.22 ± 8.11 and 69.85 ± 9.74, respectively, in RBH 3.81 mm as a mean. There was no clinical evidence of membrane perforation or complication reports, and the average operation time was 11.2 ± 1.85 min.

CONCLUSION

The current study found that at highly atrophic posterior maxilla with a residual bone height of ≥ 2.0 _ < 6.0 mm, osseodensification using Versah drills was effective in crestal sinus elevation with no membrane perforation, which was confirmed by cone-beam CT scan postoperatively, and showed higher primary and secondary implant stability.

Flapless osteotome-mediated sinus floor elevation using platelet-rich fibrin versus lateral approach using deproteinised bovine bone mineral for residual bone height of 2-6 mm: a randomised trial

OBJECTIVES

To evaluate patient-reported outcomes and radiographic results of simultaneous implant placement in severely atrophic maxilla using flapless endoscope-assisted osteotome sinus floor elevation with platelet-rich fibrin (PRF), also defined as PESS, and to compare the results with those of lateral sinus floor elevation (LSFE).

METHODS

Patients with a residual bone height (RBH) of 2-6 mm were included in a randomised controlled trial. PESS was performed with PRF as the sole grafting material. LSFE was performed using deproteinised bovine bone matrix. Patient-reported outcomes were recorded on a visual analogue scale (VAS-pain) and visual rating scale (VRS-swelling and VRS-willingness). Peri-implant bone height (PBH), bone mineral density (BMD), and sinus grafting remodelling index were measured using CBCT immediately postoperatively and 3^rd , 6^th and 18^th months post-surgery.

RESULTS

The study population consisted of 20 patients in each group. The RBH of two groups averaged 3.35±0.79 mm and 2.92±0.63 mm with no significant difference (p > 0.05). VAS-pain was 18.0 (IR 15.0-22.5) and 35.0 (IR 32.5-37.0) in the PESS and LSFE groups, respectively (p < 0.01). VAS-pain decreased with time in both groups. VRS-swelling was lower in the PESS group than LSFE group. VRS-willingness was higher in the PESS group than LSFE group (p < 0.01). At 18 months post-surgery, the marginal bone loss was 0.60±0.25 mm and 0.69±0.35 mm in the two groups with no significant difference (p = 0.52).

CONCLUSIONS

Within the limitations of this study, PESS was associated with lower postoperative morbidity and was more tolerable than LSFE. PESS could be a reliable procedure for sinus floor elevation in patients with insufficient RBH.

Management of Schneiderian membrane perforations during maxillary sinus floor augmentation with lateral approach in relation to subsequent implant survival rates: a systematic review and meta-analysis

Background

This systematic review aimed to propose a treatment protocol for repairing intraoperative perforation of the Schneiderian membrane during maxillary sinus floor augmentation (MSFA) procedures with lateral window technique. In turn, to assess subsequent implant survival rates placed below repaired membranes compared with intact membranes and therefore determine whether membrane perforation constitutes a risk factor for implant survival.

Material and methods

This review was conducted according to PRISMA guidelines. Two independent reviewers conducted an electronic search for articles published between 2008 and April 30, 2020, in four databases: (1) The National Library of Medicine (MEDLINE/PubMed) via Ovid; (2) Web of Science (WOS); (3) SCOPUS; and (4) Cochrane Central Register of Controlled Trials (CENTRAL); also, a complementary handsearch was carried out. The Newcastle-Ottawa Quality Assessment Scale was used to assess the quality of evidence in the studies reviewed.

Results

Seven articles fulfilled the inclusion criteria and were analyzed. A total of 1598 sinus lift surgeries were included, allowing the placement of 3604 implants. A total of 1115 implants were placed under previously perforated and repaired membranes, obtaining a survival rate of 97.68%, while 2495 implants were placed below sinus membranes that were not damaged during surgery, obtaining a survival rate of 98.88%. The rate of Schneiderian membrane perforation shown in the systematic review was 30.6%. In the articles reviewed, the most widely used technique for repairing perforated membranes was collagen membrane repair.

Conclusions

Schneiderian membrane perforation during MFSA procedures with lateral approach is not a risk factor for dental implant survival (p=0.229; RR 0.977; 95% CI 0.941-1.015). The knowledge of the exact size of the membrane perforation is essential for deciding on the right treatment plan.

Supplementary Information

The online version contains supplementary material available at 10.1186/s40729-021-00346-7.

Sandblasted and Acid Etched Titanium Dental Implant Surfaces Systematic Review and Confocal Microscopy Evaluation

The field of dental implantology has made progress in recent years, allowing safer and predictable oral rehabilitations. Surely the rehabilitation times have also been reduced, thanks to the advent of the new implant surfaces, which favour the osseointegration phases and allow the clinician to rehabilitate their patients earlier. To carry out this study, a search was conducted in the Pubmed, Embase and Elsevier databases; the articles initially obtained according to the keywords used numbered 283, and then subsequently reduced to 10 once the inclusion and exclusion criteria were applied. The review that has been carried out on this type of surface allows us to fully understand the features and above all to evaluate all the advantages or not related. The study materials also are supported by a manufacturing company, which provided all the indications regarding surface treatment and confocal microscopy scans. In conclusion, we can say that, thanks to these new surfaces, it has been possible to shorten the time necessary to obtain osseointegration and, therefore, secondary stability on the part of implants. The surfaces, therefore, guarantee an improved cellular adhesion and thanks to the excellent wettability all the biological processes that derive from it, such as increases in the exposed implant surface, resulting in an increase in bone-implant contact (BIC).

Fresh Frozen Allogeneic Bone Block in Maxillary Sinus Floor Elevation: Histomorphometric Analysis of a Bone Specimen Retrieved 15 Years after Grafting Procedure

Nowadays implant-prosthetic rehabilitations are one of the best solutions for rehabilitating our patients. These allow obtaining rehabilitations with optimal functional and aesthetic performances. Often patients, who undergo implant-prosthetic therapy, have the conditions of edentulias, single or multiple, that have been going on for some time. This, according to the literature, produces resorption of the alveolar bone, a process that is complicated in the posterior area of the upper arch by a pneumatization of the maxillary sinuses. The loss of vertical height, so that the implant fixtures can be inserted, requires a maneuver called maxillary sinus floor elevation. This procedure, now safely performed with piezoelectric instruments, allows increasing bone height through bone grafting. In this study, the tissue obtained from a patient, after 15 years from the intervention, was evaluated by histological and SEM analyses. The bone healing in the patient has led to a perfect integration between the patient’s bone and the fresh frozen allograft used, however still present and detectable after 15 years.

Comparative Investigation of Cutting Devices on Bone Blocks: An SEM Morphological Analysis

Background: Bone regeneration is a reliable technique when the bone volume is insufficient to provide a functional and aesthetic outcome in surgery and implantoprosthesis procedures. When bone blocks are used but do not match the shape of the defect, the block must be adapted. The aim of our research was to evaluate, by Scanning Electron Microscopy (SEM) morphological observation, how different cutting devices modify the bone surface. Method: Four equine bone blocks were divided into 15 cubic shape samples with ultrasonic and sonic tips, as well as diamond, tungsten carbide, and Lindemann burs. The uncut surface of the obtained bone block was used as a control. Two observers independently analyzed the SEM observation recording, including cut precision, depth of incision, thermal damages, and presence of bone debris. For each group, sharpness, depth, carbonization, and bone debris were expressed as mean values. Results: The osteotomy performed with an ultrasonic tip shows the best results, preserving the bone morphology in both quantitative and qualitative analyses. The bone surface appeared sufficiently clean from debris and showed a reduced presence of carbonization. Conclusion: The shaping of the bone block as in vivo osteotomy respects the bone morphology and allows it to achieve the relevant biological and clinical outcome.

The IG- file use to Gauge the Apical Diameter in Endodontics: An In Vitro Study

Aim:

The aim of this study was to evaluate the efficacy of the IG-file, a new instrument designed for apical diameter gauging.

Materials and Methods:

After shaping with F1 Universal Protaper, 60 roots were randomly divided into two groups and assigned to two operators, One Expert in Endodontics (EO) and One Unexpert (UO).

In each sample, after canal curvatures have been detected, the apical diameters were measured with the IG-file and the K-NiTi. The results were compared with the reference value obtained by retrograde apical gauging. The data were statistically analyzed.

Results:

Among 60 samples, 10% of errors were recorded when the IG-files were used; in the K-NiTi group the incorrect measurements were 70%.

In both groups (expert and unexpert) the IG-file measurements were more accurate than the K-NiTi (90 vs 33 and 90 vs 26,7). The differences were statistically significant.

In curved canals, the difference between measurement rates performed with both instruments was statistically significant (85,7% IG-file vs 28,6% K-NiTi) as well as for the samples without curvatures (92,3% IG file vs 30,8% NiTi file).

In root canals without curvatures overestimation errors in K-NiTi file group are more frequent than underestimation errors. This difference was statistically significant.

Conclusion:

A proper gauging of the apical diameter has a key role in endodontic therapy; an incorrect measurement can lead to clinical failures. This “in vitro” study highlights that IG-file improves measurement accuracy independently from clinician experience. Furthermore, in curved canals, the IG-file is more accurate than K-NiTi.

Accuracy of Periapical Radiography and CBCT in Endodontic Evaluation

Introduction

A radiological evaluation is essential in endodontics, for diagnostic purposes, planning and execution of the treatment, and evaluation of the success of therapy. The periapical radiography is nowadays the main radiographic investigations used but presents some limits as 3D anatomic alteration, geometric compression, and possible anatomical structures overlapping that can obscure the area of interest. CBCT (cone beam computed tomography) in endodontics allows a detailed assessment of the teeth and surrounding alveolar anatomy for endodontic diagnosis, treatment planning, and follow-up.

Objective

The purpose of this study was to evaluate the accuracy of CBCT in comparison with conventional intraoral radiographs used in endodontic procedures.

Materials and Methods

Statistical analysis was performed on 101 patients with previous endodontic treatments with the relative radiographic documentation (preoperative, postoperative, and follow-up intraoral X-ray) that had underwent at CBCT screening for surgical reasons. The CBCT scans were evaluated independently by two operators and compared with the corresponding periapical images.

Results

Our analysis shows that the two radiological investigations statistically agree in 100% of cases in the group of patients without any endodontic sign. In the group of patients with an endodontic pathology, detected with CBCT, endodontic under extended treatments (30.6%), MB2 canals in nontreated maxillary molars (20.7%), second canals in nontreated mandibular incisors (9%), root fractures (2.7%), and root resorption (2.7%) were not always visible in intraoral X-ray. Otherwise, positivity in the intraoral X-ray was always confirmed in CBCT. A radiolucent area was detected in CBCT exam in 46%, while the intraoral X-ray exam was positive only in 18%.

Conclusions

Our study shows that some important radiological signs acquired using CBCT are not always visible in periapical X-ray. Furthermore, CBCT is considered as a II level exam and could be used to solve diagnostic questions, essential to a proper management of the endodontic problems.

Steam Sterilization of Equine Bone Block: Morphological and Collagen Analysis

Introduction

The use of equine bone blocks is widely reported for bone augmentation techniques. The block must be shaped according to the form of the defect that should be regenerated. The shaping could be performed by hand before or during the surgery, in a sterile ambient, or using a CNC milling machine that could not be sterile. The aim of our study was to evaluate if a steam sterilization could provide a medical grade sterilization of the blocks and to evaluate if bone microstructure and collagen structures change after different steam sterilization protocols provided by mainstream autoclave.

Materials and Method

Two blocks of equine bone were divided into 16 samples. 1 sample was used as control and not submitted to any treatment. 15 samples were infected with a Streptococcus faecalis bacterial culture. The samples were singularly packed, randomly divided into 3 groups, and submitted to autoclave sterilization on the same device. The groups were submitted to a sterilization cycle (Gr. A: 121°C, 1,16 bar for 20'; Gr. B:134°C, 2,16 bar for 4'; Gr. C: 134°C, 2,16 bar for 3.30 min.). 2 samples for each group were evaluated for the sterility. 3 samples for each group were observed at SEM to notice the macro- and microstructure modification and to confocal microscope to observe the collagen.

Results

All samples were sterile. The SEM evaluation showed, in all groups, a preserved morphological structure. Confocal microscope evaluation shows that the collagen structure appears to be more uniform and preserved in group C.

Conclusion

Data show that autoclave steam sterilization could be reliable to obtain sterilization of equine bone blocks.

Platelet-Rich Fibrin (PRF) in Implants Dentistry in Combination with New Bone Regenerative Flapless Technique: Evolution of the Technique and Final Results

Most common techniques for alveolar bone augmentation are guided bone regeneration (GBR) and autologous bone grafting. GBR studies demonstrated long-term reabsorption using heterologous bone graft. A general consensus has been achieved in implant surgery for a minimal amount of 2 mm of healthy bone around the implant. A current height loss of about 3-4 mm will result in proper deeper implant insertion when alveolar bone expansion is not planned because of the dome shape of the alveolar crest. To manage this situation a split crest technique has been proposed for alveolar bone expansion and the implants' insertion in one stage surgery. Platelet-rich fibrin (PRF) is a healing biomaterial with a great potential for bone and soft tissue regeneration without inflammatory reactions, and may be used alone or in combination with bone grafts, promoting hemostasis, bone growth, and maturation.

AIM

The aim of this study was to demonstrate the clinical effectiveness of PRF combined with a new split crest flapless modified technique in 5 patients vs. 5 control patients.

MATERIALS AND METHODS

Ten patients with horizontal alveolar crests deficiency were treated in this study, divided into 2 groups: Group 1 (test) of 5 patients treated by the flapless split crest new procedure; Group 2 (control) of 5 patients treated by traditional technique with deeper insertion of smaller implants without split crest. The follow-up was performed with x-ray orthopantomography and intraoral radiographs at T0 (before surgery), T1 (operation time), T2 (3 months) and T3 (6 months) post-operation.

RESULTS

All cases were successful; there were no problems at surgery and post-operative times. All implants succeeded osteointegration and all patients underwent uneventful prosthetic rehabilitation. Mean height bone loss was 1 mm, measured as bone-implant most coronal contact (Δ-BIC), and occurred at immediate T2 post-operative time (3 months). No alveolar bone height loss was detected at implant insertion time, which was instead identified in the control group because of deeper implant insertion.

CONCLUSION

This modified split crest technique combined with PRF appears to be reliable, safe, and to improve the clinical outcome of patients with horizontal alveolar crests deficiency compared to traditional implanting techniques by avoiding alveolar height-loss related to deeper insertion of smaller implants.

Odontogenic Sinusitis Caused by an Inflammation of a Dentigerous Cyst and Subsequent Finding of a Fibrous Dysplasia. A Case Report

We report the case of a 38-year old male patient with sinusitis caused by an infected follicular cyst due to an ectopic impacted third molar in the right maxillary sinus. A 10-day antibiotherapy regimen was administered; subsequently, the cyst and the third molar were removed achieving complete recovery. Fibrous dysplasia was diagnosed at follow-up examination (occupation of the maxillary sinus by bone tissue was observed in a radiographic examination) and confirmed by biopsy. In cases of odontogenic sinusitis, thorough examination is crucial, as evidenced by the case reported in this study. A Literature review was performed in order to identify the diagnostic methods currently available and the clinical features, complications and treatment for both, odontogenic maxillary sinusitis and fibrous dysplasia.

Platelet-rich fibrin (PRF) in implant dentistry in combination with new bone regenerative technique in elderly patients

•

PRF in association with a new split crest augmentation technique was analyzed.

•

Ten patients five with the new technique and five by traditional one were treated.

•

All cases were successful and all implants achieved osteointegration.

•

Main advantages with this technique are soft tissues healing and bone regenerative properties.

Introduction

Some studies have demonstrated that platelet rich fibrin (PRF) is a healing biomaterial with a great potential for bone and soft tissue regeneration, without any inflammatory reactions and may be used alone or in combination with bone grafts, promoting hemostasis, bone growth, and maturation. PRF appears as a natural and satisfactory aid in bone regenerative surgery in elderly patients with favorable results and low risks.

Aim

This study wants to demonstrate how PRF in association with a new split crest augmentation technique can be a great aid in implant rehabilitation, especially in the elderly patients, when bone regeneration is required.

Materials and methods

Ten patients were treated in this study, five following the flapless split crest new procedure and other five patients following traditional procedure without split crest as control. Five patients with an average age between 50 and 60 years were selected to be operated with a split crest flapless modified technique in order to optimize the regenerative conditions with a bone augmentation and implant insertion in one single stage procedure. For all the patients autologous PRF has been used to fill the split crest gap or simply as regenerative material. Orthopantomography, intraoral radiography and CT DentaScan/CT Cone beam were performed for every patient before the treatment and at follow-up time exeption made for CT.

Results

All cases were successful, there were no problems at surgery time, at post-operative and at osteointegration periods. All implants achieved osteointegration. These results were obtained by accurately managing immediate and late post operative period in all of the operated cases. Mean difference for height bone loss between the two groups of patients was 2.4 mm at T1 and 2.2 mm at T3.

Discussion

The rationale of this split crest flapless modified technique is to obtain a proper buccal cortex expansion preserving its vascular supply avoiding periosteal elevation for better cortical bone nourishing. Moreover, advantages are reported related to the use of PRF. The effectiveness of PRF is shown in promoting the healing of surgical wounds, it has, in fact, platelet growth factors that can improve the vascularisation of the surgical site, promoting neoangiogenesis. Furthermore, by simply changing the settings of the centrifuge, it is possible to obtain a normal gelling if it has to be used as regenerative and stimulating material, or more consistent substance to be used as a filler in the split crest gap.

Conclusions

The main advantages in using the platelet-rich fibrin are healing and bone regenerative properties in combination with its complete resorption after surgery, thus avoiding a second surgery time, important factor in the elderly patients. Currently, it is a minimally invasive technique with low risks and satisfactory clinical results such preventing complications or implant failure particularly in elderly patients for age related conditions.

Inlay osteotome sinus floor elevation with concentrated growth factor application and simultaneous short implant placement in severely atrophic maxilla

Sinus floor elevation with simultaneous implant placement in severely atrophic maxilla is challenging. The aim of this retrospective study was to evaluate the short-term performance of modified osteotome sinus floor elevation (OSFE) with concentrated growth factor (CGF) application and concurrent placement of a short implant in cases with residual bone height (RBH) of 2-4 mm. Twenty-five short implants were installed in 16 patients with mean RBH of 3.23 mm using modified OSFE with CGFs from January 2012 to April 2014. Postoperatively, the implants were clinically evaluated, and vertical bone gain (VBG) was measured using cone beam computed tomography. The mean duration of follow-up was 19.88 months (12-32 months). All the implants were stable with an overall survival rate of 100%. The mean VBG immediately after surgery was 9.21 mm. Six months later, significant reduction of alveolar bone height (2.90 ± 0.22 mm) was found (P < 0.05). During the second 6-month period, further alveolar bone resorption (0.14 ± 0.11 mm) was noted but without significance (P > 0.05). Within the limits of this study, modified OSFE with CGF application and simultaneous short implant placement could yield predictable clinical results for severely atrophic maxilla with RBH of 2-4 mm.

Use of Implant-Derived Minimally Invasive Sinus Floor Elevation: A Multicenter Clinical Observational Study With 12- to 65-Month Follow-Up

The aim of this study is to evaluate the performance of implant-derived minimally invasive sinus floor elevation. A multicenter retrospective study was performed in 5 dental clinics. Patients requiring sinus augmentation for single implant placement were recorded and followed up. The dental implant used in this trial was a self-tapping endosseous dental implant that contains an internal channel to allow the introduction of liquids through the implant body into the maxillary sinus; those liquids include saline and a flowable bone grafting material. Overall, 37 implants were installed in 37 patients. The age range of the patients was 37-75 years (mean: 51.2 years). The average residual bone height prior to the procedure was 5.24 ± 1 mm. Of all cases, 25 implants replaced the maxillary first molar and 12 replaced the maxillary second premolar. All surgeries were uneventful with no apparent perforation of the sinus membrane. The mean follow-up time was 24.81 ± 13 months ranging from 12 to 65 months. All implants integrated and showed stable marginal bone level. No adverse events were recorded during the follow-up period. The presented method for transcrestal sinus floor elevation procedure can be accomplished using a specially designed dental implant. Further long-term studies are warranted to reaffirm the results of this study.