Construction of Supramolecular Polymers and Covalent Polymers via the Same Monomers

Nature owns the ability to construct structurally different polymers from the same monomers. While polymers can be classified as covalent polymers (CPs) and supramolecular polymers (SPs), it is still difficult to synthesize CPs and SPs using same monomers like nature do. Herein, M1 with two diazo salts on both the ends was designed. Additionally, hydroquinone was chosen to be M2 for the existence of two hydroxyl groups. When mixing at room temperature, M1 and M2 self-assembled to SPs via N…H hydrogen bonds. In another way, upon the exposure to ultraviolet irradiation when blending M1 with M2, CPs were fabricated in the presence of covalent bonds. The excellent thermal stability of CPs was determined by TGA and DSC, while the great corrosion resistance of covalent polymers was detected by acid or alkali immersion. In this way, constructing two kinds of polymers using the same monomers was successfully achieved. This shows tremendous potential in fields of polymer science, supramolecular chemistry, which would boom the development of polymers.

A mini review on manipulation of carbohydrate for better use in surimi and surimi products: modification and compounding

Carbohydrate is widely used in the production of surimi and surimi products to improve their qualities, such as anti-freezing capability, gelling ability, nutrition, flavor and 3D printability. More and more native carbohydrates have been modified through physical methods (e.g., ball milling, irradiation and differential sedimentation), chemical method (e.g., deacetylation, hydroxypropylation and acetic acid esterification) or enzymatic method (e.g., chitosanase) before being used in the processing of surimi and surimi products in recent years. At the same time, different carbohydrates are compounded and applied to surimi and surimi products. The modified and compounded carbohydrates in surimi have been proved to improve quality of surimi and surimi products more pronouncedly than native carbohydrates. Therefore, this review summarizes the manipulation of carbohydrate by modification and compounding to improve the qualities of surimi and surimi products. Moreover, the prospects for carbohydrate modification and compounding for use in surimi and surimi products are discussed. © 2023 Society of Chemical Industry.

Preparation of lauric acid esterified starch by ethanol solvothermal process and its Pickering emulsion

In this paper, the esterification modification of different kinds of starches such as waxy maize, normal maize, high-amylose maize, cassava and potato in high temperature closed system were studied by solvothermal method. The oil-in-water Pickering emulsion were prepared with esterified starches as granule stabilizer. The microscopic state of granules in the emulsion and the physical and oxidation stability of emulsion were studied. The results show that starches are not gelatinized and can be esterified at a temperature (100 °C) much higher than that of gelatinization, and the granule morphology is almost unchanged. DS (degree of substitution) values of esterified starches range from 0.0333 to 0.0512. Pickering emulsion with 50 vol% oil volume fraction prepared with 3.0 wt% granule concentration did not show any instability such as oil-water separation after storage at room temperature for 30 days. Atomic force microscope (AFM) analysis showed that all esterified starch granules had the characteristics of granular cold-water swelling starch (GCWSS). The granules completely swelled into a dense molecular chain in the emulsion, and this three-dimensional network structure improved the stability of emulsion. Therefore, the preparation of esterified starch granules by ethanol solvothermal method is a simple and effective method.

Customizing Starch Properties: A Review of Starch Modifications and Their Applications

Starch has been a convenient, economically important polymer with substantial applications in the food and processing industry. However, native starches present restricted applications, which hinder their industrial usage. Therefore, modification of starch is carried out to augment the positive characteristics and eliminate the limitations of the native starches. Modifications of starch can result in generating novel polymers with numerous functional and value-added properties that suit the needs of the industry. Here, we summarize the possible starch modifications in planta and outside the plant system (physical, chemical, and enzymatic) and their corresponding applications. In addition, this review will highlight the implications of each starch property adjustment.

Modification of Starches and Flours by Acetylation and Its Dual Modifications: A Review of Impact on Physicochemical Properties and Their Applications

Various modification treatments have been carried out to improve the physicochemical and functional properties of various types of starch and flour. Modification by acetylation has been widely used to improve the quality and stability of starch. This review describes the effects of acetylation modification and its dual modifications on the physicochemical properties of starch/flour and their applications. Acetylation can increase swelling power, swelling volume, water/oil absorption capacity, and retrogradation stability. The dual modification of acetylation with cross-linking or hydrothermal treatment can improve the thermal stability of starch/flour. However, the results of the modifications may vary depending on the type of starch, reagents, and processing methods. Acetylated starch can be used as an encapsulant for nanoparticles, biofilms, adhesives, fat replacers, and other products with better paste stability and clarity. A comparison of various characteristics of acetylated starches and their dual modifications is expected to be a reference for developing and applying acetylated starches/flours in various fields and products.

Reaction Mechanisms Applied to Starch Modification for Biodegradable Plastics: Etherification and Esterification

Although many studies are being actively conducted to develop biodegradable plastic materials, most of these reports focused more on efficiency or performance improvement than on the reaction mechanism. This paper discussed the reaction mechanism applied to starch modification by etherification and esterification, which are the most studied in the field of biodegradable plastics. In the starch-reforming reaction by etherification, the effects of the reaction temperature, pH, solvent, and by-products on the chemical structure and physical properties of biodegradable plastics were discussed. In esterification, the structure of the substituents and the reaction solvents were examined. As a material that can replace plastics, the aim is to help derive new ideas on the design of reaction condition that can expand the use of starch.

New Techniques in Structural Tailoring of Starch Functionality

Inherent characteristics of native starches such as water insolubility, retrogradation and syneresis, and instability in harsh processing conditions (e.g., high temperature and shearing, low pH) limit their industrial applications. As starch properties mainly depend on starch composition and structure, structural tailoring of starch has been important for overcoming functional limitations and expanding starch applications in different fields. In this review, we first introduce the basics of starch structure, properties, and functionalities and then describe the interactions of starch with lipids, polysaccharides, and phenolics. After reviewing genetic, chemical, and enzymatic modifications of starch, we describe current progress in the areas of porous starch and starch-based nanoparticles. New techniques, such as using the CRISPR-Cas9 technique to tailor starch structures and using an emulsion-assisted approach in forming functional starch nanoparticles, are only feasible when they are established based on fundamental knowledge of starch. Expected final online publication date for the Annual Review of Food Science and Technology, Volume 13 is March 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

An extensive review: How starch and gluten impact dough machinability and resultant bread qualities

Wheat flour can form dough with a three-dimensional viscoelastic structure that is responsible for gas holding during fermentation and oven-rise, creating a typical fixed, open-cell foam structure of bread after baking. As the major components of dough, the continuous reticular skeleton formed by gluten proteins and the concentrated starch granules entrapped in gluten matrix predominantly determine dough rheological behaviors and bread qualities. This review surveys the latest literatures and draws out a conclusion from a plethora of information related to the filling effects of starch granules on gluten matrix and the cross-linking mechanisms between gluten proteins and starch granules, which is of great significance to provide sufficient scientific knowledge for development of bread with satisfactory attributes and quality control of end products.

Effect of cellulose and starch fatty acid esters addition on microstructure and physical properties of arabinoxylan films

Arabinoxylan (AX) and cellulose were extracted from wheat straw, whereas starch was extracted from potato peel. Thereafter, cellulose and starch were esterified with lauric, myristic, palmitic and stearic acids to prepare corresponding cellulose (CFAs) and starch fatty acid esters (SFAs) with DS 2.1-2.8. XRD study revealed remarkable loss of crystallinity in cellulose and starch due to fatty acid esterification. The addition of palmitate and stearate esters of cellulose and starch to AX formed laminar film microstructures which limited water vapor permeability whereas films prepared by blending AX with laurate and myristate esters of starch and cellulose were less effective as water vapor barrier due to their non-layer microstructures. The laminar structures also resulted significant reduction in mechanical strength of the composite films. Furthermore, all AX-CFAs and AX-SFAs films were thermally more stable than native composite films. These films might be used to produce industrially useful coating material for food products.

Green Design of Novel Starch-Based Packaging Materials Sustaining Human and Environmental Health

A critical overview of current approaches to the development of starch-containing packaging, integrating the principles of green chemistry (GC), green technology (GT) and green nanotechnology (GN) with those of green packaging (GP) to produce materials important for both us and the planet is given. First, as a relationship between GP and GC, the benefits of natural bioactive compounds are analyzed and the state-of-the-art is updated in terms of the starch packaging incorporating green chemicals that normally help us to maintain health, are environmentally friendly and are obtained via GC. Newer approaches are identified, such as the incorporation of vitamins or minerals into films and coatings. Second, the relationship between GP and GT is assessed by analyzing the influence on starch films of green physical treatments such as UV, electron beam or gamma irradiation, and plasma; emerging research areas are proposed, such as the use of cold atmospheric plasma for the production of films. Thirdly, the approaches on how GN can be used successfully to improve the mechanical properties and bioactivity of packaging are summarized; current trends are identified, such as a green synthesis of bionanocomposites containing phytosynthesized metal nanoparticles. Last but not least, bioinspiration ideas for the design of the future green packaging containing starch are presented.

Recent trends in the application of modified starch in the adsorption of heavy metals from water: A review

The presence of polyfunctional ligands on the bio-macromolecules acts as an efficient adsorbent for heavy metal ions. Starch is one of the most abundant, easily available and cheap biopolymer of plant origin. However, native starch exhibits significantly low adsorption capacity due to the absence of some essential functional groups like carboxyl, amino or ester groups and is thus modified using various reaction routes like grafting, cross-linking, esterification, oxidation and irradiation for addition of functional groups to increase its adsorption capacity. The present review provides a comprehensive discussion on the above mentioned modification schemes of starch over the last 10-15 years highlighting their preparation methods, physico-chemical characteristics along with their adsorption capacities and mechanisms of heavy metal ions from water.

Production and Properties of Starch Citrates-Current Research

Starch modification by chemical reaction is widely used to improve the properties of native starch. Modified by citric acid, starch is characterized by specific properties resulting from the presence of citrate residues and as a result of cross-linking starch. The chemicals used for preparing starch citrates are safe for human health and the natural environment compared to the harsh chemicals used for conventional modifications. Starch citrates are traditionally produced by heating starch-citric acid mixtures in semi-dry conditions or by a heat moisture treatment. The conditions of the modification process (roasting temperature, heating time, citric acid dose) and the botanic source or genotype of starch determine the degree of substitution and the properties of the obtained preparations. Changes of starch properties occurring during esterification lead to reduced relative crystallinity, resulting in a decrease in the affinity for water, the gelatinization parameters, and the viscosity of starch citrate. However, one of the most important outcome of the modification is the formation of resistant starch (RS), which has increased resistance to the action of amylolytic enzymes. Currently, new methods for producing starch citrates with improved functional and rheological properties while maintaining the highest possible content of resistant starch are being sought. The article presents an overview of recent studies on the production, properties. And applicability of starch citrates with special attention paid to their role as preparations of resistant starch (RS). The use of citric acid for modification of starch is better for the technology process, while using cross-linking is better than simply using esterification.

Cross-linked-substituted (esterified/etherified) starch derivatives as aqueous heavy metal ion adsorbent: a review

Starch is a biopolymer with outstanding economic and environmentally friendly attributes which has driven technological innovations to enhance its applications in food and non-food industries. Starch is constituted by O-H groups with valency and electronic characteristics that can initiate adsorption of aqueous heavy metal ions (AHMIs). However, this can be enhanced using various modification sequences. A common procedure is the cross-linking and substitution of the O-H groups via esterification and/or etherification reactions to produce starch derivative adsorbents (SDAs) with improved structural and functional properties for adsorption of AHMIs. The efficiency of SDAs developed using these procedures depends on the botanical source of the native starch base, porosity and structural stability of the derivative (i.e. degree of cross-linking), substituted functional group(s), degree of substitution and the steric/conformation effects of the substituted groups. Many works have been done to optimize these factors, and this review highlighted some of the tailored procedures and the results obtained.