Engineering Tissues without the Use of a Synthetic Scaffold: A Twenty-Year History of the Self-Assembly Method

Tissue Engineering for Penile Reconstruction

The penis is a complex organ with a development cycle from the fetal stage to puberty. In addition, it may suffer from either congenital or acquired anomalies. Penile surgical reconstruction has been the center of interest for many researchers but is still challenging due to the complexity of its anatomy and functionality. In this review, penile anatomy, pathologies, and current treatments are described, including surgical techniques and tissue engineering approaches. The self-assembly technique currently applied is emphasized since it is considered promising for an adequate tissue-engineered penile reconstructed substitute.

Extracellular Matrix-Based and Electrospun Scaffolding Systems for Vaginal Reconstruction

Congenital vaginal anomalies and pelvic organ prolapse affect different age groups of women and both have significant negative impacts on patients' psychological well-being and quality of life. While surgical and non-surgical treatments are available for vaginal defects, their efficacy is limited, and they often result in long-term complications. Therefore, alternative treatment options are urgently needed. Fortunately, tissue-engineered scaffolds are promising new treatment modalities that provide an extracellular matrix (ECM)-like environment for vaginal cells to adhere, secrete ECM, and be remodeled by host cells. To this end, ECM-based scaffolds or the constructs that resemble ECM, generated by self-assembly, decellularization, or electrospinning techniques, have gained attention from both clinicians and researchers. These biomimetic scaffolds are highly similar to the native vaginal ECM and have great potential for clinical translation. This review article aims to discuss recent applications, challenges, and future perspectives of these scaffolds in vaginal reconstruction or repair strategies.

Tissue Engineering for Gastrointestinal and Genitourinary Tracts

The gastrointestinal and genitourinary tracts share several similarities. Primarily, these tissues are composed of hollow structures lined by an epithelium through which materials need to flow with the help of peristalsis brought by muscle contraction. In the case of the gastrointestinal tract, solid or liquid food must circulate to be digested and absorbed and the waste products eliminated. In the case of the urinary tract, the urine produced by the kidneys must flow to the bladder, where it is stored until its elimination from the body. Finally, in the case of the vagina, it must allow the evacuation of blood during menstruation, accommodate the male sexual organ during coitus, and is the natural way to birth a child. The present review describes the anatomy, pathologies, and treatments of such organs, emphasizing tissue engineering strategies.

Engineered human organ-specific urethra as a functional substitute

Urologic patients may be affected by pathologies requiring surgical reconstruction to re-establish a normal function. The lack of autologous tissues to reconstruct the urethra led clinicians toward new solutions, such as tissue engineering. Tridimensional tissues were produced and characterized from a clinical perspective. The balance was optimized between increasing the mechanical resistance of urethral-engineered tissue and preserving the urothelium's barrier function, essential to avoid urine extravasation and subsequent inflammation and fibrosis. The substitutes produced using a mix of vesical (VF) and dermal fibroblasts (DF) in either 90%:10% or 80%:20% showed mechanical resistance values comparable to human native bladder tissue while maintaining functionality. The presence of mature urothelium markers such as uroplakins and tight junctions were documented. All substitutes showed similar histological features except for the noticeable decrease in polysaccharide globules for the substitutes made with a higher proportion of DF. The degree of maturation evaluated with electron microscopy was positively correlated with the increased concentration of VF in the stroma. Substitutes produced with VF and at least 10% of DF showed sufficient mechanical resistance to withstand surgeon manipulation and high functionality, which may improve long-term patients' quality of life, representing a great future alternative to current treatments.

Tissue Engineering in Gynecology

Female gynecological organ dysfunction can cause infertility and psychological distress, decreasing the quality of life of affected women. Incidence is constantly increasing due to growing rates of cancer and increase of childbearing age in the developed world. Current treatments are often unable to restore organ function, and occasionally are the cause of female infertility. Alternative treatment options are currently being developed in order to face the inadequacy of current practices. In this review, pathologies and current treatments of gynecological organs (ovaries, uterus, and vagina) are described. State-of-the-art of tissue engineering alternatives to common practices are evaluated with a focus on in vivo models. Tissue engineering is an ever-expanding field, integrating various domains of modern science to create sophisticated tissue substitutes in the hope of repairing or replacing dysfunctional organs using autologous cells. Its application to gynecology has the potential of restoring female fertility and sexual wellbeing.

Single-cell and spatial mapping Identify cell types and signaling Networks in the human ureter

Tissue engineering offers a promising treatment strategy for ureteral strictures, but its success requires an in-depth understanding of the architecture, cellular heterogeneity, and signaling pathways underlying tissue regeneration. Here, we define and spatially map cell populations within the human ureter using single-cell RNA sequencing, spatial gene expression, and immunofluorescence approaches. We focus on the stromal and urothelial cell populations to enumerate the distinct cell types composing the human ureter and infer potential cell-cell communication networks underpinning the bi-directional crosstalk between these compartments. Furthermore, we analyze and experimentally validate the importance of the sonic hedgehog (SHH) signaling pathway in adult progenitor cell maintenance. The SHH-expressing basal cells support organoid generation in vitro and accurately predict the differentiation trajectory from basal progenitor cells to terminally differentiated umbrella cells. Our results highlight the essential processes involved in adult ureter tissue homeostasis and provide a blueprint for guiding ureter tissue engineering.

DNA marker based diversity across rice genotypes and advanced breeding lines bred for temperate regions of North-West India

BACKGROUND

Characterization and evaluation of plant genetic resources play an important role for their utilization in the crop improvement programmes.

METHODS AND RESULTS

This study involves the agro-morphological and cooking quality besides, molecular characterization of 51 genotypes/advance breeding lines of rice from Kashmir Himalayas. Significant variability was observed for all agro-morphological and cooking quality traits among all the studied genotypes. Cluster analysis using UPGMA method divided the genotypes into two major clusters having 15 and 36 genotypes. Thirty eight genotypes screened using 24 SSR markers detected 48 alleles with 2.0 alleles for each locus with average polymorphism information content (PIC) of 0.37. High polymorphism information content (PIC) values was observed for the primers RM263 (0.67), RM159 (0.59) and RM333 (0.50). Furthermore, out of 38 SSR markers screened on 192 temperate rice germpalsm lines, R4M17 accurately differentiated indica and temperate japonica genotypes amplifying 220 bp and 169 bp, respectively. Accordingly, 15 genotypes were reported as indica and 28 temperate japonica in addition to 149 genotypes as intermediate types.

CONCLUSION

The information on marker-based diversity and performance based on cooking quality and agronomic traits helped to select the most divergent lines for crossing. Also the analysis was useful to classify the temperate germplasm into indica and temperate japonica. The classification could be helpful to devise a strategy for inter-sub species hybridization to breed for improved rice varieties.

Tissue Engineering and Photodynamic Therapy: A New Frontier of Science for Clinical Application -An Up-To-Date Review

Tissue engineering (TE) connects principles of life sciences and engineering to develop biomaterials as alternatives to biological systems and substitutes that can improve and restore tissue function. The principle of TE is the incorporation of cells through a 3D matrix support (scaffold) or using scaffold-free organoid cultures to reproduce the 3D structure. In addition, 3D models developed can be used for different purposes, from studies mimicking healthy tissues and organs as well as to simulate and study different pathologies. Photodynamic therapy (PDT) is a non-invasive therapeutic modality when compared to conventional therapies. Therefore, PDT has great acceptance among patients and proves to be quite efficient due to its selectivity, versatility and therapeutic simplicity. The PDT mechanism consists of the use of three components: a molecule with higher molar extinction coefficient at UV-visible spectra denominated photosensitizer (PS), a monochromatic light source (LASER or LED) and molecular oxygen present in the microenvironment. The association of these components leads to a series of photoreactions and production of ultra-reactive singlet oxygen and reactive oxygen species (ROS). These species in contact with the pathogenic cell, leads to its target death based on necrotic and apoptosis ways. The initial objective of PDT is the production of high concentrations of ROS in order to provoke cellular damage by necrosis or apoptosis. However, recent studies have shown that by decreasing the energy density and consequently reducing the production of ROS, it enabled a specific cell response to photostimulation, tissues and/or organs. Thus, in the present review we highlight the main 3D models involved in TE and PS most used in PDT, as well as the applications, future perspectives and limitations that accompany the techniques aimed at clinical use.

In Vitro Disease Models for Understanding Psoriasis and Atopic Dermatitis

Psoriasis (PS) and Atopic Dermatitis (AD) are two of the most prevalent inflammatory skin diseases. Dysregulations in the immune response are believed to play a crucial role in the pathogenesis of these conditions. Various parallels can be drawn between the two disorders, as they are both genetically mediated, and characterised by dry, scaly skin caused by abnormal proliferation of epidermal keratinocytes. The use of in vitro disease models has become an increasingly popular method to study PS and AD due to the high reproducibility and accuracy in recapitulating the pathogenesis of these conditions. However, due to the extensive range of in vitro models available and the majority of these being at early stages of production, areas of development are needed. This review summarises the key features of PS and AD, the different types of in vitro models available to study their pathophysiology and evaluating their efficacy in addition to discussing future research opportunities.

Spheroids of Bladder Smooth Muscle Cells for Bladder Tissue Engineering

Cell-based tissue engineering (TE) has been proposed to improve treatment outcomes in end-stage bladder disease, but TE approaches with 2D smooth muscle cell (SMC) culture have so far been unsuccessful. Here, we report the development of primary bladder-derived 3D SMC spheroids that outperform 2D SMC cultures in differentiation, maturation, and extracellular matrix (ECM) production. Bladder SMC spheroids were compared with 2D cultures using live-dead staining, qRT-PCR, immunofluorescence, and immunoblotting to investigate culture conditions, contractile phenotype, and ECM deposition. The SMC spheroids were viable for up to 14 days and differentiated rather than proliferating. Spheroids predominantly expressed the late myogenic differentiation marker MyH11, whereas 2D SMC expressed more of the general SMC differentiation marker α-SMA and less MyH11. Furthermore, the expression of bladder wall-specific ECM proteins in SMC spheroids was markedly higher. This first establishment and analysis of primary bladder SMC spheroids are particularly promising for TE because differentiated SMCs and ECM deposition are a prerequisite to building a functional bladder wall substitute. We were able to confirm that SMC spheroids are promising building blocks for studying detrusor regeneration in detail and may provide improved function and regenerative potential, contributing to taking bladder TE a significant step forward.

Heat-Inactivation of Fetal and Newborn Sera Did Not Impair the Expansion and Scaffold Engineering Potentials of Fibroblasts

Heat inactivation of bovine sera is routinely performed in cell culture laboratories. Nevertheless, it remains debatable whether it is still necessary due to the improvement of the production process of bovine sera. Do the benefits balance the loss of many proteins, such as hormones and growth factors, that are very useful for cell culture? This is even truer in the case of tissue engineering, the processes of which is often very demanding. This balance is examined here, from nine populations of fibroblasts originating from three different organs, by comparing the capacity of adhesion and proliferation of cells, their metabolism, and the capacity to produce the stroma; their histological appearance, thickness, and mechanical properties were also evaluated. Overall, serum inactivation does not appear to provide a significant benefit.

Considerations for the clinical use of stem cells in genitourinary regenerative medicine

The genitourinary tract can be affected by several pathologies which require repair or replacement to recover biological functions. Current therapeutic strategies are challenged by a growing shortage of adequate tissues. Therefore, new options must be considered for the treatment of patients, with the use of stem cells (SCs) being attractive. Two different strategies can be derived from stem cell use: Cell therapy and tissue therapy, mainly through tissue engineering. The recent advances using these approaches are described in this review, with a focus on stromal/mesenchymal cells found in adipose tissue. Indeed, the accessibility, high yield at harvest as well as anti-fibrotic, immunomodulatory and proangiogenic properties make adipose-derived stromal/SCs promising alternatives to the therapies currently offered to patients. Finally, an innovative technique allowing tissue reconstruction without exogenous material, the self-assembly approach, will be presented. Despite advances, more studies are needed to translate such approaches from the bench to clinics in urology. For the 21^st century, cell and tissue therapies based on SCs are certainly the future of genitourinary regenerative medicine.

Genitourinary Tissue Engineering: Reconstruction and Research Models

Tissue engineering is an emerging field of research that initially aimed to produce 3D tissues to bypass the lack of adequate tissues for the repair or replacement of deficient organs. The basis of tissue engineering protocols is to create scaffolds, which can have a synthetic or natural origin, seeded or not with cells. At the same time, more and more studies have indicated the low clinic translation rate of research realised using standard cell culture conditions, i.e., cells on plastic surfaces or using animal models that are too different from humans. New models are needed to mimic the 3D organisation of tissue and the cells themselves and the interaction between cells and the extracellular matrix. In this regard, urology and gynaecology fields are of particular interest. The urethra and vagina can be sites suffering from many pathologies without currently adequate treatment options. Due to the specific organisation of the human urethral/bladder and vaginal epithelium, current research models remain poorly representative. In this review, the anatomy, the current pathologies, and the treatments will be described before focusing on producing tissues and research models using tissue engineering. An emphasis is made on the self-assembly approach, which allows tissue production without the need for biomaterials.

Reconstruction of Vascular and Urologic Tubular Grafts by Tissue Engineering

Tissue engineering is one of the most promising scientific breakthroughs of the late 20th century. Its objective is to produce in vitro tissues or organs to repair and replace damaged ones using various techniques, biomaterials, and cells. Tissue engineering emerged to substitute the use of native autologous tissues, whose quantities are sometimes insufficient to correct the most severe pathologies. Indeed, the patient’s health status, regulations, or fibrotic scars at the site of the initial biopsy limit their availability, especially to treat recurrence. This new technology relies on the use of biomaterials to create scaffolds on which the patient’s cells can be seeded. This review focuses on the reconstruction, by tissue engineering, of two types of tissue with tubular structures: vascular and urological grafts. The emphasis is on self-assembly methods which allow the production of tissue/organ substitute without the use of exogenous material, with the patient’s cells producing their own scaffold. These continuously improved techniques, which allow rapid graft integration without immune rejection in the treatment of severely burned patients, give hope that similar results will be observed in the vascular and urological fields.

Innovative Human Three-Dimensional Tissue-Engineered Models as an Alternative to Animal Testing

Animal testing has long been used in science to study complex biological phenomena that cannot be investigated using two-dimensional cell cultures in plastic dishes. With time, it appeared that more differences could exist between animal models and even more when translated to human patients. Innovative models became essential to develop more accurate knowledge. Tissue engineering provides some of those models, but it mostly relies on the use of prefabricated scaffolds on which cells are seeded. The self-assembly protocol has recently produced organ-specific human-derived three-dimensional models without the need for exogenous material. This strategy will help to achieve the 3R principles.

Artificial dermal substitutes for tissue regeneration: comparison of the clinical outcomes and histological findings of two templates

OBJECTIVE

Artificial dermal substitutes (DSs) are fundamental in physiological wound healing to ensure consistent and enduring wound closure and provide a suitable scaffold to repair tissue. We compared the clinical and histological features of two DSs, Pelnac and Integra, in the treatment of traumatic and iatrogenic skin defects.

METHODS

This prospective observational study involved 71 randomly selected patients from our hospital. Wound healing was analyzed using the Wound Surface Area Assessment, the Vancouver Scar Scale, and a visual analog scale. Histological and immunohistochemical evaluations were also performed.

RESULTS

At 2 weeks, greater regeneration with respect to proliferation of the epidermis and renewal of the dermis was observed with Pelnac than with Integra. At 4 weeks, the dermis had regenerated with both DSs. Both templates induced renewed collagen and revascularization. Differences in the Vancouver Scar Scale score were statistically significant at 4 weeks and 1 year. Pelnac produced a significant increase in contraction at 2 weeks with increasing effectiveness at 4 weeks. Integra produced a higher percentage reduction in the wound surface area and a shorter healing time than Pelnac for wounds >1.5 cm deep.

CONCLUSION

Our observational data indicate that both DSs are effective and applicable in different clinical contexts.

Detrusor bioengineering using a cell-enriched compressed collagen hydrogel

OBJECTIVE

The gold standard for bladder regeneration in end-stage bladder disease is the use of intestinal tissue, which is however associated with significant long-term complications. Our study aims to bioengineer functional detrusor muscle combining bladder smooth muscle cells (SMC) and SMC-like adipose-derived stem cells (pADSC) in compressed collagen (CC) hydrogels and to investigate biocompatibility and tissue regeneration of such detrusor-equivalents in a rat detrusorectomy model.

METHODS

Compressed collagen hydrogels seeded with 1 × 10⁶ or 4 × 10⁶ SMC alone or in combination with pADSC in a 1:1 ratio were investigated. Morphology, phenotype, and viability as well as proteomic secretome analysis were assessed in the 1:1 co-cultures and the respective monocultures. The hydrogels were implanted into rat bladders after partial detrusorectomy. Bladders were harvested 8 weeks after transplantation, and assessed for tissue morphology, detrusor regeneration, neo-vascularization and -innervation.

RESULTS

Co-cultured cells exhibited native SMC morphology, high viability and proliferated to form microtissues in vitro. The pro-angiogenic factors angiogenin, vascular endothelial growth factor (VEGF)-A and -D were increased in the secretome of the pADSC samples. After 8 weeks of in vivo, the regenerated bladder wall showed a multilayered structure containing all bladder wall components. The overall performance of the bladder wall regeneration of CC seeded with 4 × 10⁶ cells was significantly better than with 1 × 10⁶ cells and the combination SMC:pADCS performed slightly better than SMC alone.

CONCLUSION

Compressed collagen possesses an adequate regenerative potential to promote regeneration of bladder wall tissue in vivo. Seeded with a combination of pADSC and SMC this may well be the first step towards a functional bladder reconstruction especially in patients suffering of end-stage bladder diseases.

Prevascularized Tissue-Engineered Human Vaginal Mucosa: In Vitro Optimization and In Vivo Validation

Tissue engineering offers novel therapies for vaginal reconstruction in patients with congenital vaginal agenesis such as Mayer-Rokitansky-Küster-Hauser (MRKH) syndrome. This study aims to reconstruct a prevascularized tissue-engineered model of human vaginal mucosa (HVM) using the self-assembly approach, free of exogenous materials. In this study, a new cell culture method was used to enhance microcapillary network formation while maintaining sufficient biomechanical properties for surgical manipulation. Human vaginal fibroblasts were coseeded with human umbilical vein endothelial cells (HUVECs). Transduction of HUVEC with a vector that allows the expression of both green fluorescent protein (GFP) and luciferase allowed the monitoring of the formation of a microvascular network in vitro and the assessment of the viability and stability of HUVEC in vivo. Two reconstructed vaginal mucosa grafts, a prevascularized, and a nonvascularized control were implanted subcutaneously on the back of 12 female nude mice and monitored for up to 21 days. Prevascularized grafts demonstrated signs of earlier vascularization compared with controls. However, there were no differences in graft survival outcomes in both groups. The finding of mouse red blood cells within GFP-positive capillaries 1 week after implantation demonstrates the capacity of the reconstructed capillary-like network to connect to the host circulation and sustain blood perfusion in vivo. Furthermore, sites of inosculation between GFP-positive HUVEC and mouse endothelial cells were observed within prevascularized grafts. Our results demonstrate that the addition of endothelial cells using a hybrid approach of self-assembly and reseeding generates a mature capillary-like network that has the potential to become functional in vivo, offering an optimized prevascularized HVM model for further translational research. Impact statement This study introduces a prevascularized tissue-engineered model of human vaginal mucosa (HVM), which is adapted for surgical applications. The prevascularization of tissue-engineered grafts aims to enhance graft survival and is an interesting feature for sexual function. Various scaffold-free cell culture methods were tested to reconstruct a mature microcapillary network within HVM grafts while meeting biomechanical needs for surgery. Moreover, this animal study assesses the vascular functionality of prevascularized grafts in vivo, serving as a proof of concept for further translational applications. This research underlines the continuous efforts to optimize current models to closely mimic native tissues and further improve surgical outcomes.

Human Organ-Specific 3D Cancer Models Produced by the Stromal Self-Assembly Method of Tissue Engineering for the Study of Solid Tumors

Cancer research has considerably progressed with the improvement of in vitro study models, helping to understand the key role of the tumor microenvironment in cancer development and progression. Over the last few years, complex 3D human cell culture systems have gained much popularity over in vivo models, as they accurately mimic the tumor microenvironment and allow high-throughput drug screening. Of particular interest, in vitrohuman 3D tissue constructs, produced by the self-assembly method of tissue engineering, have been successfully used to model the tumor microenvironment and now represent a very promising approach to further develop diverse cancer models. In this review, we describe the importance of the tumor microenvironment and present the existing in vitro cancer models generated through the self-assembly method of tissue engineering. Lastly, we highlight the relevance of this approach to mimic various and complex tumors, including basal cell carcinoma, cutaneous neurofibroma, skin melanoma, bladder cancer, and uveal melanoma.

The ins and outs of engineering functional tissues and organs: evaluating the in-vitro and in-situ processes

PURPOSE OF REVIEW

For many disorders that result in loss of organ function, the only curative treatment is organ transplantation. However, this approach is severely limited by the shortage of donor organs. Tissue engineering has emerged as an alternative solution to this issue. This review discusses the concept of tissue engineering from a technical viewpoint and summarizes the state of the art as well as the current shortcomings, with the aim of identifying the key lessons that we can learn to further advance the engineering of functional tissues and organs.

RECENT FINDINGS

A plethora of tissue-engineering strategies have been recently developed. Notably, these strategies put different emphases on the in-vitro and in-situ processes (i.e. preimplantation and postimplantation) that take place during tissue formation. Biophysical and biomechanical interactions between the cells and the scaffold/biomaterial play a crucial role in all steps and have started to be exploited to steer tissue regeneration.

SUMMARY

Recent works have demonstrated the need to better understand the in-vitro and in-situ processes during tissue formation, in order to regenerate complex, functional organs with desired cellular organization and tissue architecture. A concerted effort from both fundamental and tissue-specific research has the potential to accelerate progress in the field.

Tissue Engineering in Pediatric Bladder Reconstruction-The Road to Success

Several congenital disorders can cause end stage bladder disease and possibly renal damage in children. The current gold standard therapy is enterocystoplasty, a bladder augmentation using an intestinal segment. However, the use of bowel tissue is associated with numerous complications such as metabolic disturbance, stone formation, urine leakage, chronic infections, and malignancy. Urinary diversions using engineered bladder tissue would obviate the need for bowel for bladder reconstruction. Despite impressive progress in the field of bladder tissue engineering over the past decades, the successful transfer of the approach into clinical routine still represents a major challenge. In this review, we discuss major achievements and challenges in bladder tissue regeneration with a focus on different strategies to overcome the obstacles and to meet the need for living functional tissue replacements with a good growth potential and a long life span matching the pediatric population.