Histological, Histomorphometrical, and Biomechanical Studies of Bone-Implanted Medical Devices: Hard Resin Embedding

Mass Spectrometry-Based Proteomics of Poly(methylmethacrylate)-Embedded Bone

Liquid chromatography-tandem mass spectrometry (LC-MS/MS) is a widely employed technique in proteomics research for studying the proteome biology of various clinical samples. Hard tissues, such as bone and teeth, are routinely preserved using synthetic poly(methyl methacrylate) (PMMA) embedding resins that enable histological, immunohistochemical, and morphological examination. However, the suitability of PMMA-embedded hard tissues for large-scale proteomic analysis remained unexplored. This study is the first to report on the feasibility of PMMA-embedded bone samples for LC-MS/MS analysis. Conventional workflows yielded merely limited coverage of the bone proteome. Using advanced strategies of prefractionation by high-pH reversed-phase liquid chromatography in combination with isobaric tandem mass tag labeling resulted in proteome coverage exceeding 1000 protein identifications. The quantitative comparison with cryopreserved samples revealed that each sample preparation workflow had a distinct impact on the proteomic profile. However, workflow replicates exhibited a high reproducibility for PMMA-embedded samples. Our findings further demonstrate that decalcification prior to protein extraction, along with the analysis of solubilization fractions, is not preferred for PMMA-embedded bone. The biological applicability of the proposed workflow was demonstrated using samples of human PMMA-embedded alveolar bone and the iliac crest, which revealed anatomical site-specific proteomic profiles. Overall, these results establish a crucial foundation for large-scale proteomics studies contributing to our knowledge of bone biology.

Decellularized biological matrices for the repair of rotator cuff lesions: a systematic review of preclinical in vivo studies

Background: Rotator cuff tears (RCTs), resulting from degeneration or trauma of the shoulder tendons, are one of the main causes of shoulder pain. In particular, massive RCTs represent 40% of all injuries, require surgical treatment, and are characterized by poor clinical outcomes and a high rate of failure. In recent years, the use of biological decellularized patches for augmentation procedures has received great interest owing to their excellent self-integration properties, improving healing and, thus, presenting an innovative therapeutic option. However, the findings from clinical studies have emerged with conflicting viewpoints regarding the benefits of this procedure, as an excessive tension load might compromise the integrity of the tendon-to-bone connection when the patch exhibits low elasticity or insufficient strength. This could prevent the healing process, leading to unpredictable results in clinical practice. Methods: This systematic review was conducted following Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA) guidelines across three databases (PubMed, Scopus, and Web of Knowledge) to underline the results obtained in preclinical studies involving animal models of RCT surgeries that utilized the biological decellularized matrix augmentation technique in the last 5 years. Results: Thirteen articles were included after the screening, and the SYRCLE tools were applied to assess the risk of bias in in vivo studies. Open-surgery techniques were conducted to create tendon defects or detachment in different animal models: rat (31%), rabbit (46%), dog (15%), and sheep (8%). Patches decellularized with non-standardized protocols were used in 77% of studies, while commercially available matrices were used in 15%. Of the studies, 31% used allogenic patches, 61% used xenogenic patches, and 8% utilized both xenogenic and autologous patches. Conclusion: Overall, this review provides a comprehensive overview of the use of acellular patches and their effective therapeutic potential in rotator cuff (RC) repair at the preclinical level with the aim of expanding the strategies and matrices available for surgeons. Systematic review registration: https://www.crd.york.ac.uk/prospero/, identifier CRD42023468716.

Histological and immunohistochemical guide to tendon tissue

Tendons are unique dense connective tissues with discrete zones having specific structure and function. They are juxtaposed with other tissues (e.g., bone, muscle, and fat) with different compositional, structural, and mechanical properties. Additionally, tendon properties change drastically with growth and development, disease, aging, and injury. Consequently, there are unique challenges to performing high quality histological assessment of this tissue. To address this need, histological assessment was one of the breakout session topics at the 2022 Orthopaedic Research Society (ORS) Tendon Conference hosted at the University of Pennsylvania. The purpose of the breakout session was to discuss needs from members of the ORS Tendon Section related to histological procedures, data presentation, knowledge dissemination, and guidelines for future work. Therefore, this review provides a brief overview of the outcomes of this discussion and provides a set of guidelines, based on the perspectives from our laboratories, for histological assessment to assist researchers in their quest to utilize these techniques to enhance the outcomes and interpretations of their studies.

Investigation of Bone Regeneration Efficacy of New Bovine Bone Minerals in a Canine Mandibular Critical Defect Model

This study aims to investigate the bone regeneration effect of bovine hydroxyapatite-processed biomaterials Bone-XB and S1-XB in a beagle mandibular defect model. A total of four saddle-type critical sizes (15 mm × 10 mm) bone defects are created in each dog: two defects in the left mandible and two defects in the right mandible. The defect control (DC) group is kept unfilled, and the other three defects are filled with three different biomaterials as follows: positive control Bio-Oss (Bio-Oss group), Bone-XB (XB group), and S1-XB (S1-XB group). Bone regeneration is evaluated by radiography, micro-computed tomography, and histological analysis. It is revealed that Bone-XB and S1-XB significantly increase newly formed bone, defect filling percentage, and bone healing score compared to the DC group, which is confirmed by bone microstructure augmentation (bone volume/total volume, trabecular number, and trabecular thickness). Interestingly, no significant differences are observed between the Bone-XB, S1-XB, and Bio-Oss groups. It is suggested that Bone-XB or S1-XB stimulates bone regeneration demonstrated by the increase in newly formed bone and bone microstructure, thereby improving bone defect filling, which is equivalent to the Bio-Oss. Therefore, bovine hydroxyapatite-processed Bone-XB or S1-XB can be considered effective biomaterials for correcting critical-size bone defects or fractures.

Secondary ion mass spectrometry for bone research

The purpose of this Tutorial is to highlight the suitability of time-of-flight secondary ion mass spectrometry (ToF-SIMS) and OrbiTrap™ SIMS (Orbi-SIMS) in bone research by introducing fundamentals and best practices of bone analysis with these mass spectrometric imaging (MSI) techniques. The Tutorial includes sample preparation, determination of best-suited measurement settings, data acquisition, and data evaluation, as well as a brief overview of SIMS applications in bone research in the current literature. SIMS is a powerful analytical technique that allows simultaneous analysis and visualization of mineralized and nonmineralized bone tissue, bone marrow as well as implanted biomaterials, and interfaces between bone and implants. Compared to histological staining, which is the standard analytical procedure in bone research, SIMS provides chemical imaging of nonstained bone sections that offers insights beyond what is conventionally obtained. The Tutorial highlights the versatility of ToF- and Orbi-SIMS in addressing important questions in bone research. By illustrating the value of these MSI techniques, it demonstrates how they can contribute to advance progress in bone research.

Enhancement of Scaffold In Vivo Biodegradability for Bone Regeneration Using P28 Peptide Formulations

The field of bone tissue engineering has shown a great variety of bone graft substitute materials under development to date, with the aim to reconstruct new bone tissue while maintaining characteristics close to the native bone. Currently, insufficient scaffold degradation remains the critical limitation for the success of tailoring the bone formation turnover rate. This study examines novel scaffold formulations to improve the degradation rate in vivo, utilising chitosan (CS), hydroxyapatite (HAp) and fluorapatite (FAp) at different ratios. Previously, the P28 peptide was reported to present similar, if not better performance in new bone production to its native protein, bone morphogenetic protein-2 (BMP-2), in promoting osteogenesis in vivo. Therefore, various P28 concentrations were incorporated into the CS/HAp/FAp scaffolds for implantation in vivo. H&E staining shows minimal scaffold traces in most of the defects induced after eight weeks, showing the enhanced biodegradability of the scaffolds in vivo. The HE stain highlighted the thickened periosteum indicating a new bone formation in the scaffolds, where CS/HAp/FAp/P28 75 µg and CS/HAp/FAp/P28 150 µg showed the cortical and trabecular thickening. CS/HAp/FAp 1:1 P28 150 µg scaffolds showed a higher intensity of calcein green label with the absence of xylenol orange label, which indicates that mineralisation and remodelling was not ongoing four days prior to sacrifice. Conversely, double labelling was observed in the CS/HAp/FAp 1:1 P28 25 µg and CS/HAp/FAp/P28 75 µg, which indicates continued mineralisation at days ten and four prior to sacrifice. Based on the HE and fluorochrome label, CS/HAp/FAp 1:1 with P28 peptides presented a consistent positive osteoinduction following the implantation in the femoral condyle defects. These results show the ability of this tailored formulation to improve the scaffold degradation for bone regeneration and present a cost-effective alternative to BMP-2.

Correlative Light, Electron Microscopy and Raman Spectroscopy Workflow To Detect and Observe Microplastic Interactions with Whole Jellyfish

Many researchers have turned their attention to understanding microplastic interaction with marine fauna. Efforts are being made to monitor exposure pathways and concentrations and to assess the impact such interactions may have. To answer these questions, it is important to select appropriate experimental parameters and analytical protocols. This study focuses on medusae of Cassiopea andromeda jellyfish: a unique benthic jellyfish known to favor (sub-)tropical coastal regions which are potentially exposed to plastic waste from land-based sources. Juvenile medusae were exposed to fluorescent poly(ethylene terephthalate) and polypropylene microplastics (<300 μm), resin embedded, and sectioned before analysis with confocal laser scanning microscopy as well as transmission electron microscopy and Raman spectroscopy. Results show that the fluorescent microplastics were stable enough to be detected with the optimized analytical protocol presented and that their observed interaction with medusae occurs in a manner which is likely driven by the microplastic properties (e.g., density and hydrophobicity).

Characterization of the histological response to the Butterfly Prostatic Retraction Device in patients with benign prostatic hyperplasia

PURPOSE

The Butterfly Prostatic Retraction Device ("Butterfly") is a permanent nitinol implant for benign prostatic hyperplasia. This study examines the chronic response of prostate tissue to the Butterfly in histological specimens from patients in the Butterfly pilot clinical study.

METHODS

Retrospective qualitative and semi-quantitative review of histological specimens of seven (7) patients who participated in the Butterfly pilot clinical study. Patients had at least 1-month implantation with the Butterfly prior to implant removal and TURP. Tissue samples were graded by two pathologists.

RESULTS

Four out of six patients had IPSS decreased from baseline. All seven patients' samples had signs of chronic inflammation; one demonstrated acute inflammation and one demonstrated fibrosis. In three cases, intraglandular calcification was identified. There was no ischemic necrosis induced by the implant, and no encrustation, urethral edema, or cellular atypia was noted.

CONCLUSION

The Butterfly demonstrated an overall favorable safety profile in terms of tissue response. This study demonstrates that there is no significant tissue reaction in the prostatic urethra due to presence of Butterfly device.

Nanomechanical Mapping of Hard Tissues by Atomic Force Microscopy: An Application to Cortical Bone

Force mapping of biological tissues via atomic force microscopy (AFM) probes the mechanical properties of samples within a given topography, revealing the interplay between tissue organization and nanometer-level composition. Despite considerable attention to soft biological samples, constructing elasticity maps on hard tissues is not routine for standard AFM equipment due to the difficulty of interpreting nanoindentation data in light of the available models of surface deformation. To tackle this issue, we proposed a protocol to construct elasticity maps of surfaces up to several GPa in moduli by AFM nanoindentation using standard experimental conditions (air operation, nanometrically sharp spherical tips, and cantilever stiffness below 30 N/m). We showed how to process both elastic and inelastic sample deformations simultaneously and independently and quantify the degree of elasticity of the sample to decide which regime is more suitable for moduli calculation. Afterwards, we used the frequency distributions of Young's moduli to quantitatively assess differences between sample regions different for structure and composition, and to evaluate the presence of mechanical inhomogeneities. We tested our method on histological sections of sheep cortical bone, measuring the mechanical response of different osseous districts, and mapped the surface down to the single collagen fibril level.

Angle-stable interlocking nailing in a canine critical-sized femoral defect model for bone regeneration studies: In pursuit of the principle of the 3R’s

Introduction: Critical-sized long bone defects represent a major therapeutic challenge and current treatment strategies are not without complication. Tissue engineering holds much promise for these debilitating injuries; however, these strategies often fail to successfully translate from rodent studies to the clinical setting. The dog represents a strong model for translational orthopedic studies, however such studies should be optimized in pursuit of the Principle of the 3R’s of animal research (replace, reduce, refine). The objective of this study was to refine a canine critical-sized femoral defect model using an angle-stable interlocking nail (AS-ILN) and reduce total animal numbers by performing imaging, biomechanics, and histology on the same cohort of dogs.

Methods: Six skeletally mature hounds underwent a 4 cm mid-diaphyseal femoral ostectomy followed by stabilization with an AS-ILN. Dogs were assigned to autograft (n = 3) or negative control (n = 3) treatment groups. At 6, 12, and 18 weeks, healing was quantified by ordinal radiographic scoring and quantified CT. After euthanasia, femurs from the autograft group were mechanically evaluated using an established torsional loading protocol. Femurs were subsequently assessed histologically.

Results: Surgery was performed without complication and the AS-ILN provided appropriate fixation for the duration of the study. Dogs assigned to the autograft group achieved radiographic union by 12 weeks, whereas the negative control group experienced non-union. At 18 weeks, median bone and soft tissue callus volume were 9,001 mm³ (range: 4,939–10,061) for the autograft group and 3,469 mm³ (range: 3,085–3,854) for the negative control group. Median torsional stiffness for the operated, autograft treatment group was 0.19 Nm/° (range: 0.19–1.67) and torque at failure was 12.0 Nm (range: 1.7–14.0). Histologically, callus formation and associated endochondral ossification were identified in the autograft treatment group, whereas fibrovascular tissue occupied the critical-sized defect in negative controls.

Conclusion: In a canine critical-sized defect model, the AS-ILN and described outcome measures allowed refinement and reduction consistent with the Principle of the 3R’s of ethical animal research. This model is well-suited for future canine translational bone tissue engineering studies.

A preliminary, observational study using whole-blood RNA sequencing reveals differential expression of inflammatory and bone markers post-implantation of percutaneous osseointegrated prostheses

AIMS

While the benefits of direct skeletal attachment of artificial limbs are well recognized, device failure due to infection and insufficient osseointegration remain obstacles to obtaining consistently successful outcomes. Currently, the potential for device failure is assessed by subjective pain, clinical function scores, radiographic evidence of bone atrophy, and the presence of radiolucent lines at the bone-implant interface, and subjective pain and function scores. Our hypothesis is that measurable biological indices might add another objective means to assess trends toward bone and stomal healing. This longitudinal cohort study was undertaken to identify potential serological biomarkers suggestive of bone remodeling and the presence of stomal tissue inflammation.

METHODS

Ten unilateral transfemoral amputee veterans, who were implanted with a percutaneous osseointegrated (OI) skeletal limb docking system, were recruited to participate in this IRB-approved study. Venous blood samples were obtained from before the Stage 1 Surgery up to 1 year following the Stage 2 Surgery. Whole-blood RNA was extracted, sequenced, mapped, and analyzed. Of the significant differentially expressed (DEGs) genes (p<0.05) identified, four genes of interest (IL12B, IL33, COL2A1, and SOST) were validated using qPCR. Enrichment analysis was performed to identify significant (p<0.01) Gene Ontology (GO) terms.

RESULTS

Most differentially expressed genes were only detected at PoS1 immediately after the first surgery. Of the significant genes identified, IL12B and IL33 were related to inflammation, and COL2A1 and SOST were associated with bone remodeling. These four genes were identified with greater than 20 log fold-change.

CONCLUSION

Whole-blood RNA-seq data from 10 patients who previously underwent percutaneous osseointegrated lower limb implantation revealed four genes of interest that are known to be involved in inflammation or bone remodeling. If verified in future studies, these genes may serve as markers for predicting optimal bone remodeling and stomal tissue healing following OI device implantation.

Effect of pore size on tissue ingrowth and osteoconductivity in biodegradable Mg alloy scaffolds

Magnesium has mechanical properties similar to those of bone and is being considered as a potential bone substitute. In the present study, two different pore sized scaffolds of the Mg alloy LAE442, coated with magnesium fluoride, were compared. The scaffolds had interconnecting pores of either 400 (p400) or 500 µm (p500). ß-TCP served as control. Ten scaffolds per time group (6, 12, 24, 36 weeks) were implanted in the trochanter major of rabbits. Histological analyses, µCT scans, and SEM/EDX were performed. The scaffolds showed slow volume decreases (week 36 p400: 9.9%; p500: 7.5%), which were accompanied by uncritical gas releases. In contrast, ß-TCP showed accelerated resorption (78.5%) and significantly more new bone inside (18.19 ± 1.47 mm³). Bone fragments grew into p400 (0.17 ± 0.19 mm³) and p500 (0.36 ± 0.26 mm³), reaching the centrally located pores within p500 more frequently. In particular, p400 displayed a more uneven and progressively larger surface area (week 36 p400: 253.22 ± 19.44; p500: 219.19 ± 4.76 mm²). A better osseointegration of p500 was indicated by significantly more trabecular contacts and a 200 µm wide bone matrix being in the process of mineralization and in permanent contact with the scaffold. The number of macrophages and foreign body giant cells were at an acceptable level concerning resorbable biomaterials. In terms of ingrown bone and integrative properties, LAE442 scaffolds could not achieve the results of ß-TCP. In this long-term study, p500 appears to be a biocompatible and more osteoconductive pore size for the Mg alloy LAE442.

Novel resin tissue array system reduces sample preparation time, labour and reagent costs in bone tissue histology

Resin histology plays an essential role in the analysis of hard tissues, such as bone and teeth, as well as in the context of metallic implant analysis. However, the techniques of resin embedding, followed by ground sectioning, are very costly due to significantly increased reagent cost and labour time when compared to the conventional paraffin histology approach. In the present study, a novel resin array system was developed to increase the affordability of a project analysing rat femur tissues containing metallic or polymeric implants. The resin array system enabled the simultaneous embedding of the femur samples in groups of eight samples compared to the conventional resin method where samples are processed individually. The ground sections produced with the resin array system allowed uniform ROI selection, ground section thickness, staining consistency, and histological analysis with Goldner's trichrome stain, offering a substantial opportunity for reproducible immunohistochemistry which is unable to be achieved when processing samples embedded individually. The application of this novel resin array system significantly reduced resource usage when compared to doing the same analysis on individual samples. A reduction of approximately 40% was achieved for both total labour time and total reagent cost through the use of the array system compared with individual embedding. This novel resin array system has widespread applicability to many bone, hard tissue, and metallic implant studies, offering substantial conservation of research funds and increased accessibility to advanced techniques for commercial partners due to more cost-effective sample preparation and more accurate, reproducible data.

Histological examination of a retrieved custom-made 3D-printed titanium vertebra : Do the fine details obtained by additive manufacturing really promote osteointegration?

PURPOSE

In the present report it is described the design, the manufacturing and the successful surgical implant of one of the first 3D custom titanium vertebra realized with Additive Manufacturing technique and its use for the spinal reconstruction after en-bloc resection for primary osteogenic sarcoma.

METHODS

Clinical case presentation and the design of the 3D custom titanium vertebra was reported. It was also described the complex procedures adopted to evaluate the retrieved device from the histological point of view, as a tumor relapse hit the patient, one year after the reconstruction procedure.

RESULTS

The histological evaluation confirmed that the resection technique exerts an important role in promoting bone formation: vertebral body osteotomies favored the reconstruction procedure and maximized the contact area between host bone/vertebral prosthesis thus favoring the bone tissue penetration and device colonization.

CONCLUSION

The sharing of these results is very important as they represent the starting point for improving the knowledge starting from the evidence obtained in a challenging clinical condition and with post-operative treatments that could be never reproduced in preclinical model.

An alternative ex vivo method to evaluate the osseointegration of Ti-6Al-4V alloy also combined with collagen

Due to the increasing number of orthopedic implantation surgery and advancements in biomaterial manufacturing, chemistry and topography, there is an increasing need of reliable and rapid methods for the preclinical investigation of osseointegration and bone ingrowth. Implant surface composition and topography increase osteogenicity, osteoinductivity, osteoconductivity and osseointegration of a prosthesis. Among the biomaterials used to manufacture an orthopedic prosthesis, titanium alloy (Ti-6Al-4V) is the most used. Type I collagen (COLL I) induces cell function, adhesion, differentiation and bone extracellular matrix component secretion and it is reported to improve osseointegration if immobilized on the alloy surface. The aim of the present study was to evaluate the feasibility of an alternative ex vivo model, developed by culturing rabbit cortical bone segments with Ti-6Al-4V alloy cylinders (Ti-POR), fabricated through the process of electron beam melting (EBM), to evaluate osseointegration. In addition, a comparison was made with Ti-POR coated with COLL I (Ti-POR-COLL) to evaluate osseointegration in terms of bone-to-implant contact (BIC) and new bone formation (nBAr/TAr) at 30, 60 and 90 d of culture. After 30 and 60 d of culture, BIC and nBAr/TAr resulted significantly higher in Ti-POR-COLL implants than in Ti-POR. No differences have been found at 90 d of culture. With the developed model it was possible to distinguish the biomaterial properties and behavior. This study defined and confirmed for the first time the validity of the alternative ex vivo method to evaluate osseointegration and that COLL I improves osseointegration and bone growth of Ti-6Al-4V fabricated through EBM.

Early osteoimmunomodulatory effects of magnesium-calcium-zinc alloys

Today, substantial attention is given to biomaterial strategies for bone regeneration, and among them, there is a growing interest in using immunomodulatory biomaterials. The ability of a biomaterial to induce neo vascularization and macrophage polarization is a major factor in defining its success. Magnesium (Mg)-based degradable alloys have attracted significant attention for bone regeneration owing to their biodegradability and potential for avoiding secondary removal surgeries. However, there is insufficient evidence in the literature regarding the early inflammatory responses to these alloys in vivo. In this study, we investigated the early body responses to Mg-0.45wt%Zn-0.45wt%Ca pin-shaped alloy (known as ZX00 alloy) in rat femora 2, 5, and 10 days after implantation. We used 3D micro computed tomography (µCT), histological, immunohistochemical, histomorphometrical, and small angle X-ray scattering (SAXS) analyses to study new bone formation, early macrophage polarization, neo vascularization, and bone quality at the implant bone interface. The expression of macrophage type 2 biological markers increased significantly after 10 days of Mg alloy implantation, indicating its potential in stimulating macrophage polarization. Our biomineralization results using µCT as well as histological stained sections did not indicate any statistically significant differences between different time points for both groups. The activity of alkaline phosphatase (ALP) and Runt-related transcription factor 2 (Runx 2) biological markers decreased significantly for Mg group, indicating less osteoblast activity. Generally, our results supported the potential of ZX00 alloy to enhance the expression of macrophage polarization in vivo; however, we could not observe any statistically significant changes regarding biomineralization.