Potential use of extracted flax seed mucilage in the construction of macroporous cryo-scaffolds

Mucilage is a natural source of polysaccharides that has recently attracted attention for use in biomaterial production. It attracts attention with its easy and fast extraction, biocompatibility, high water retention capacity, and biodegradability. Although there are studies on the characterization of mucilage obtained from different plant sources, the interaction of this polymer with other polymers and its potential to form new biomaterials have not yet been sufficiently investigated. Based on this, in this study, the potential of mucilage extracted from flaxseed for the production of cryogels for tissue engineering applications was demonstrated. Firstly, yield, basic physicochemical properties, morphology, and surface charge-dependent isoelectric point determination studies were carried out for the characterization of the extracted mucilage. The successful preparation of mucilage was evaluated for the construction of cryo-scaffolds and 3D, spongy, and porous structures were obtained in the presence of chitosan and polyvinyl alcohol polymers. A heterogeneous morphology with interconnected macro and micro porosity in the range of approximately 85-115 m pore diameter was exhibited. Due to the high hydrophilic structure of the mucilage, which is attached to the structure with weak hydrogen bonds, the contact angle values of the scaffolds were obtained below 80° and they showed the ability to absorb 1000 times their dry weight in approximately 30 min. As a preliminary optimization study for the evaluation of mucilage in cryogel formation, this work introduced a new construct to be developed as wound dressing scaffold for deep and chronic wounds.

Application of fermentation for the valorization of residues from Cactaceae family

Cactaceae family is well-known for their adaptations to drought and arid environments. This family, formed by four subfamilies (Cactoideae, Opuntioideae, Pereskioideae, and Maihuenioideae) are known for being leafless stem succulent plants with numerous spines, and their commercial fruits, distinguished by their bright colors and their skin covered with bracts. Some of these species have been traditionally used in the food industry (e.g., pitaya, cactus, or prickly pear) or as pharmaceuticals to treat specific diseases due to their active properties. The processing of these fruits leads to different residues, namely pomace, skin, spines, and residues from cladodes; besides from others such as fruits, roots, flowers, mucilage, and seeds. In general, Cactaceae species produce large amounts of mucilage and fiber, although they can be also considered as a source of phenolic compounds (phenolic acids, flavonols and their glycosides), alkaloids (phenethylamines derived betalains), and triterpenoids. Therefore, considering their high content in fiber and fermentable carbohydrates, together with other target bioactive compounds, fermentation is a potential valorization strategy for certain applications such as enzymes and bioactive compounds production or aroma enhancement. This review will comprise the latest information about Cactaceae family, its potential residues, and its potential as a substrate for fermentation to obtain active molecules with application in the food industry.

Utilization of Bioflocculants from Flaxseed Gum and Fenugreek Gum for the Removal of Arsenicals from Water

Mucilage-based flocculants are an alternative to synthetic flocculants and their use in sustainable water treatment relates to their non-toxic and biodegradable nature. Mucilage extracted from flaxseed (FSG) and fenugreek seed (FGG) was evaluated as natural flocculants in a coagulation-flocculation (CF) process for arsenic removal, and were compared against a commercial xanthan gum (XG). Mucilage materials were characterized by spectroscopy (FT-IR, ¹³C NMR), point-of-zero charge (pH_pzc) and thermogravimetric analysis (TGA). Box-Behnken design (BBD) with response surface methodology (RSM) was used to determine optimal conditions for arsenic removal for the CF process for three independent variables: coagulant dosage, flocculant dosage and settling time. Two anionic systems were tested: S1, roxarsone (organic arsenate 50 mg L^-1) at pH 7 and S2 inorganic arsenate (inorganic arsenate 50 mg L^-1) at pH 7.5. Variable arsenic removal (RE, %) was achieved: 92.0 (S1-FSG), 92.3 (S1-FGG), 92.8 (S1-XG), 77.0 (S2-FSG), 69.6 (S2-FGG) and 70.6 (S2-XG) based on the BBD optimization. An in situ kinetic method was used to investigate arsenic removal, where the pseudo-first-order model accounts for the kinetic process. The FSG and FGG materials offer a sustainable alternative for the controlled removal of arsenic in water using a facile CF treatment process with good efficiency, as compared with a commercial xanthan gum.

Macro-Reticular Ion Exchange Resins for Recovery of Direct Dyes from Spent Dyeing and Soaping Liquors

Dyes are a major class of organic pollutants that are well-known for their harmful impact on aquatic life and humans. Several new strategies for removing colours from industrial and residential effluents have recently emerged, with adsorption being the best option. The current study looked at the recovery of direct dyes from aqueous streams for reuse using macro-reticular ion exchange resins (IERs). The investigation includes dyeing single jersey cotton grey textiles with direct dyes from the Isma dye Company in Kafr El Dawar, Egypt. After centrifuging and separating the supernatant liquid, solutions from thirteen different dyes, produced at an average concentration between the wasted and soaping liquor concentrations, were calculated spectrophotometrically from the first dyeing trials. Kinetic data were well fitted with pseudo-second-order rate kinetics. The amounts of dye retained by the anion exchangers increased with a rise in temperature in the case of Strong Base Resin (SBR) and vice versa for Weak Base Resin (WBR). Batch adsorption experiments with SBR and WBR were conducted for each dye, and both Freundlich and Langmuir isotherms were constructed. It was found that adsorption obeyed both isotherms, that monolayer adsorption took place, and that the dye molecular weight, structure, and solubility, as well as the type of anionic resin used, had varying effects on the extent of absorption. The monolayer sorption capacities Q₀ determined from the Langmuir isotherm model for the strongly and weakly basic anion exchangers were found to be 537.6 and 692 mg/g for Direct Yellow RL, respectively. As a result, Yellow RL exhibited the greatest adsorption on both SBR and WBR. Orange GRLL, Blue 3B, and Congo Red, on the other hand, were the poorest colours absorbed by the IERs, whereas Blue RL demonstrated good adsorption by SBR and accelerated adsorption by WBR. Most of the dyes may be recovered and reused in this manner.

Predicting flocculant dosage in the drinking water treatment process using Elman neural network

Predicting the flocculant dosage in the drinking water treatment process is essential for public health. However, due to the complexity of water quality and flocculation, many difficulties remain. The present study aimed to report on using artificial intelligence, namely, the Elman neural network (ENN), to predict the flocculant dosage and explore the applications of the proposed model in waterworks. The flocculation process of drinking water was introduced in this study, and four typical models were developed based on multiple linear regression (MLR), the radial basis function neural network (RBFNN), the least squares support vector machine (LSSVM), and the ENN. To improve the prediction accuracy, a mixed term including long-term data and short-term data was proposed to capture the periodic and time-varying characteristics of water quality data. The weights of each part are updated adaptively according to the comparison of effluent turbidity and set values. The results demonstrate that the proposed ENN model performed better than the other three models in terms of the prediction performance. With the ENN model of flocculant dosage, the root mean square error (RMSE), mean absolute percentage error (MAPE), and coefficient of determination (R²) of the test data were 1.8917, 5.0067, and 0.8999, which were improved by 36.9%, 41.5%, and 14.0% in comparison with the best one (RBFNN) of the other three models, respectively. The effluent turbidity of sedimentation tank was more stable under the control of proposed ENN model of flocculant dosage than the other three models. Considering its performance, the ENN model can be taken as a preferred data intelligence tool for predicting the drinking water flocculant dosage.

Sustainable Development of Magnetic Chitosan Core-Shell Network for the Removal of Organic Dyes from Aqueous Solutions

The wide use of alizarin red S (ARS), a typical anthraquinone dye, has led to its continued accumulation in the aquatic environment, which causes mutagenic and carcinogenic effects on organisms. Therefore, this study focused on the removal of ARS dye by adsorption onto a magnetic chitosan core-shell network (MCN). The successful synthesis of the MCN was confirmed by ATR-FTIR, SEM, and EDX analysis. The influence of several parameters on the removal of ARS dye by the MCN revealed that the adsorption process reached equilibrium after 60 min, pH played a major role, and electrostatic interactions dominated for the ARS dye removal under acidic conditions. The adsorption data were described well by the Langmuir isotherm and a pseudo-second order kinetic model. In addition to the preferable adsorption of hydrophobic dissolved organic matter (DOM) fractions onto the MCN, the electrostatic repulsive forces between the previously adsorbed DOM onto MCN and ARS dye resulted in lower ARS dye removal. Furthermore, the MCN could easily be regenerated and reused for up to at least five cycles with more than 70% of its original efficiency. Most importantly, the spent MCN was pyrolytically converted into N-doped magnetic carbon and used as an adsorbent for various dyes, thus establishing a waste-free adsorption process.

Biopolymer-based flocculants: a review of recent technologies

Biopolymer-based flocculants have become a potential substitute for inorganic coagulants and synthetic organic flocculants due to their wide natural reserves, environmental friendliness, easy natural degradation, and high material safety. In recent years, with more and more attention to clean technologies, a lot of researches on the modification and application of biopolymer-based flocculants have been carried out. The present paper reviews the latest important information about the base materials of biopolymer-based flocculants, including chitosan, starch, cellulose, and lignin etc. This review also highlights the various modification methods of these base materials according to reaction types in detail. Via the recent researches, the flocculation mechanisms of biopolymer-based flocculants, such as adsorption, bridging, charge neutralization, net trapping, and sweeping, as well as, some other special mechanisms are comprehensively summarized. This paper also focuses on the water treatment conditions, the removal efficiency, and advantages of biopolymer-based flocculants in applications. Further, this review sheds light on the future perspectives of biopolymer-based flocculants, which may make progress in the sources of base materials, modification processes, multi-function, and deepening application researches. We believe that this review can guide the further researches and developments of biopolymer-based flocculants in the future, to develop them with a higher efficiency, a lower cost, more safety, and multi-function for more diversified applications. Graphical abstract.

Preparation of poly(sodium 4-styrene sulfonate) grafted magnetic chitosan microspheres for adsorption of cationic dyes

A novel adsorbent with high adsorption capacity to remove cationic dyes was synthesized. Sodium 4-styrene sulfonate (SSS) was grafted polymerization on the surface of magnetic chitosan microspheres via -NH₂/S₂O₈^2- surface initiating system, obtaining MCS-g-PSSS microspheres. The grafted microsphere was characterized by Fourier transforms infrared spectroscopy, X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, vibration sample magnetometer and the Brunauer-Emmett-Teller. Cationic dyes were adsorbed by MCS-g-PSSS and methylene blue(MB) was acted as a typical example. The adsorption performance was explored by varying experimental conditions. The results showed the maximal adsorption capacity was 989 mg/g at pH 1 at 25 °C. The pseudo-second order model was found to be applicable for the adsorption kinetics. The adsorption capacity increased with rising temperature and it decreased owing to adding of ions. The adsorption isotherms were the best fitted by Langmuir. MCS-g-PSSS for MB showed high adsorption capacity due to the strong electrostatic interactions and π-π stacking, which was explained by FTIR and XPS and was verified by DFT calculations. The degree of adsorption spontaneity increased with rising the temperature. The grafted MCS-g-PSSS microspheres had high adsorption capacity for various kinds of cationic dyes and excellent for remove MB in the aqueous solution.