Enhanced oxidation of organic pollutants by regulating the interior reaction region of reactive electrochemical membranes

Reactive electrochemical membrane (REM) emerges as an attractive strategy for the elimination of refractory organic pollutants that exist in wastewater. However, the limited reaction sites in traditional REMs greatly hinder its practical application. Herein, a feed-through coating methodology was developed to realize the uniform loading of SnO2-Sb catalysts on the interior surface of a REM. The uniformly coated REM (Unif-REM) exhibited 2.4 times higher reaction kinetics (0.29 min-1) than that of surface coated REM (Surf-REM) for the degradation of 2 mM 4-chlorophenol (4-CP), rendering an energy consumption as low as 0.016 kWh gTOC-1. The fast degradation of various emerging contaminants, e.g., sulfamethoxazole (SMX), ofloxacin (OFLX), and tetracycline (TC), also confirms its superior oxidation capability. Besides, the Unif-REM exhibited good performance in generating hydroxyl radicals (•OH) and a relatively long service lifetime. The simulation of spatial current distribution demonstrates that the interior reaction region in the Unif-REM channels can be drastically extended, thereby maximizing the surface coupling of mass diffusion and electron transfer. This study offers an in-depth look at the spatially confined reactions in REM and provides a reference for the design of electrochemical systems with economically efficient water purification.

Preparation of Yb-Sb co-doped Ti/SnO2 electrode for electrocatalytic degradation of sulfamethoxazole (SMX)

To efficiently break down residual sulfonamide antibiotics in environmental water, Yb-Sb co-doped Ti/SnO2 electrodes were fabricated using a solvothermal method. The effect of different amounts of Yb doping on the properties of the electrodes was studied. When the atom ratio of Sn: Yb is 100 : 7.5 in the preparation, the as-obtained coral-like electrodes (denoted as Yb 7.5%) possessed the smallest diameter of spherical particles on the surfaces, to result in the denser surface, highest electrocatalytic activity and smallest resistance of the electrode. As anode for electrocatalytic degradation of sulfamethoxazole, the Yb 7.5% electrode showed a degradation rate of 92% in 90 min, which was much higher than that of Yb 0% electrode (62.7% degradation rate). The electrocatalytic degradation of sulfamethoxazole was investigated with varying current densities and initial concentrations. Results indicated that the degradation process followed pseudo-first-order kinetics, and the degradation rate constants for Yb 7.5% and Yb 0% electrodes were 0.0278 min-1 and 0.0114 min-1, respectively. Furthermore, the service life of Ti/SnO2 electrodes was significantly improved after Yb doping, as demonstrated by accelerated life testing. Yb 7.5% exhibited a service life that was 2.7 times longer than that of Yb 0%. This work offers a new approach to construct Yb-Sb co-doped Ti/SnO2 electrodes with excellent electrooxidation activity and high stability for the electrochemical oxidation degradation of sulfamethoxazole.

Preparation and Characterization of Antimony-Doped Tin Oxide Nanocrystallite Coatings on 316L Stainless Steel

The study on the coatings containing antimony-dope tin oxide mostly has been done on titanium and its alloys for preparation of electrode materials. In this study, we try to prepare the similar coatings on 316L stainless steel, which is more common than titanium, and investigate some characteristics of the formed coatings. The preparation of the coating is by the impregnation of the substrate in solution containing SnCl₄ and SbCl₃ with the ratio of 93/7, and the concentration of SbCl₃, 10 g/L in isopropanol, pH of 1-1.2, and the annealed temperature of 450°C give suitable coating for electrode materials. Some coating features, such as the crystal structure (XRD), morphology (SEM), hardness, electrical resistant, and electrochemical behaviors of the coating on the substrate have been also investigated. The results of the study show that the coatings can be used as electrode materials for the effective treatment of organic colorants in water such as methylene blue in water treatment.