Investigating the potential of highly porous zopiclone-loaded 3D electrospun nanofibers for brain targeting via the intranasal route

Nanofibers (NFs) have proven to be very attractive tool as drug delivery plateform among the different plethora of nanosystems, owing to their unique features. They exhibit two- and three-dimensional structures some of which mimic structural environment of the body tissues, in addition to being safe, efficacious, and biocompatible drug delivery platform. Thus, this study embarked on fabricating polyvinyl alcohol/chitosan (PVA/CS) electrospun NFs encapsulating zopiclone (ZP) drug for intranasal brain targeted drug delivery. Electrospun NFs were optimized by adopting a three factor-two level full factorial design. The independent variables were: PVA/CS ratio (X1), flow rate (X2), and applied voltage (X3). The measured responses were: fiber diameter (Y1,nm), pore size (Y2,nm) and ultimate tensile strength (UTS,Y3,MPa). The selected optimum formula had resulted in NFs diameter of 215.90 ± 15.46 nm, pore size 7.12 ± 0.27 nm, and tensile strength around 6.64 ± 0.95 MPa. In-vitro biodegradability testing confirmed proper degradation of the NFs within 8 h. Moreover, swellability and breathability assessment revealed good hydrophilicity and permeability of the prepared NFs. Ex-vivo permeability study declared boosted ex-vivo permeation with an enhancement factor of 2.73 compared to ZP suspension. In addition, optimized NFs formula significantly reduced sleep latency and prolonged sleep duration in rats compared to IV ZP drug solution. These findings demonstrate the feasibility of employing the designed NFs as an effective safe platform for intranasal delivery of ZP for insomnia management.

Chitosan-Stabilized CuO Nanostructure-Functionalized UV-Crosslinked PVA/Chitosan Electrospun Membrane as Enhanced Wound Dressing

Electrospun nanofibrous membranes are of great interest for tissue engineering, active material delivery, and wound dressing. These nanofibers possess unique three-dimensional (3D) interconnected porous structures that result in a higher surface-area-to-volume ratio and porosity. This study was carried out to prepare nanofibrous membranes by electrospinning a blend of PVA/chitosan polymeric solution functionalized with different ratios of copper oxide. Chitosan-stabilized CuO nanoparticles (CH-CuO NPs) were biosynthesized successfully utilizing chitosan as the capping and reducing agent. XRD analysis confirmed the monoclinic structure of CH-CuO NPs. In addition, the electrospun nanofibrous membranes were UV-crosslinked for a definite time. The membranes containing CH-CuO NPs were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, ultraviolet-visible (UV-vis) spectrophotometry, and dynamic light scattering (DLS). SEM results showed the nanosize of the fiber diameter in the range of 147-207 nm. The FTIR spectroscopy results indicated the successful incorporation of CH-CuO NPs into the PVA/chitosan nanofibrous membranes. DSC analysis proved the enhanced thermal stability of the nanofibrous membranes due to UV-crosslinking. Swelling and degradation tests were carried out to ensure membrane stability. Greater antimicrobial activity was observed in the nanoparticle-loaded membrane. An in vitro release study of Cu2+ ions from the membrane was carried out for 24 h. The cytotoxicity of CH-CuO NP-incorporated membranes was investigated to estimate the safe dose of nanoparticles. An in vivo test using the CH-CuO NP-loaded PVA/chitosan membrane was conducted on a mice model, in which wound healing occurred in approximately 12 days. These results confirmed that the biocompatible, nontoxic nanofibrous membranes are ideal for wound-dressing applications.

Chitosan Based Materials in Cosmetic Applications: A Review

This review provides a report on the properties and recent advances in the application of chitosan and chitosan-based materials in cosmetics. Chitosan is a polysaccharide that can be obtained from chitin via the deacetylation process. Chitin most commonly is extracted from cell walls in fungi and the exoskeletons of arthropods, such as crustaceans and insects. Chitosan has attracted significant academic interest, as well as the attention of the cosmetic industry, due to its interesting properties, which include being a natural humectant and moisturizer for the skin and a rheology modifier. This review paper covers the structure of chitosan, the sources of chitosan used in the cosmetic industry, and the role played by this polysaccharide in cosmetics. Future aspects regarding applications of chitosan-based materials in cosmetics are also mentioned.

Chitosan-Based Formulations Intended as Protective Spray for Mask Surfaces in Prevention of Coronavirus Dissemination

The extraordinary occurrence of COVID-19 by the fast expansion of viral infections has propelled particular interest in developing novel antiviral and virucidal agents to guarantee personal security. The main objective of this work is to propose novel formulations able to optimize the use of personal protection elements. In recent years, chitosan (CH) has attracted attention for being an interesting multifunctional, biodegradable, non-antigenic, non-toxic, and biocompatible natural polymer with antimicrobial properties. In this work, formulations based on a CH matrix containing silver, and Copper based nanoparticles have been developed. The novelty of this proposal is that almost liquid formulations have been reached, possessing verified properties to inhibit evolved virus such as herpes simplex type 1 (HSV-1) and bovine betacoronavirus (BCoV), the latter belonging to the same family of the well-known the well-known SARS-CoV-2. Besides antibacterial bioactivity; as well as the ability of these formulations to be easily sprayed on various surfaces, including conventional face masks, have been verified and discussed. The results presented in this contribution provide strong evidence on CH films as an ideal biosafe surface-protective for several daily used materials including the conventional face masks.

Structural and Physicomechanical Properties of an Active Film Based on Potato Starch, Silver Nanoparticles, and Rose Apple (Syzygium samarangense) Extract

In the current research work, active films were made from potato starch (PS) and AgNP solution comprising of silver nanoparticles (AgNPs) and rose apple extract (RE) via the casting method at various concentrations. AgNP solution in the PS matrix significantly altered the physical properties such as opacity, water vapor permeability mechanical property, solubility, and swelling index of the films. The influence of AgNP solution on the properties of the films was deeply examined. The results found that the 15% AgNP solution films exhibited better physicochemical properties. The presence of AgNP solution in the PS matrix significantly improved the properties of active films which is evident from the results of FTIR and SEM. Results show that AgNPs and PS were uniformly mixed and formed continuous and homogenous films without bubbles and cracks. In addition, the AgNP solution in the films significantly improved the antibacterial activity against S. aureus than P. aeruginosa in the films.